HUAWEI-L2MAM-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-L2MAM-MIB
Download as:   
SNMPv2-CONF, HUAWEI-BASE-TRAP-MIB, ENTITY-MIB, HUAWEI-L2IF-MIB, SNMPv2-SMI, P-BRIDGE-MIB, HUAWEI-MIB, NQA-MIB, Q-BRIDGE-MIB, HUAWEI-VPLS-EXT-MIB, IF-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwL2Mgmt 1.3.6.1.4.1.2011.5.25.42
       hwL2MAM 1.3.6.1.4.1.2011.5.25.42.2
This is the layer 2 mac-address management. It contains the layer 2 mac-address forwarding information currently operating on this device. And also contains the information of mac-limit rule.
           hwL2MAMObjects 1.3.6.1.4.1.2011.5.25.42.2.1
               hwL2MaxMacLimit 1.3.6.1.4.1.2011.5.25.42.2.1.1 integer32 read-only
The maximum of Mac-address limit rule.
               hwdbCfgFdbTable 1.3.6.1.4.1.2011.5.25.42.2.1.2 no-access
The layer 2 Configured mac-address forwarding table .The table that contains the layer 2 mac-address forwarding information currently operating on this device.
                   hwdbCfgFdbEntry 1.3.6.1.4.1.2011.5.25.42.2.1.2.1 no-access
Entries of The layer 2 mac-address forwarding table.
                       hwCfgFdbMac 1.3.6.1.4.1.2011.5.25.42.2.1.2.1.1 macaddress no-access
A unicast MAC address for which the device contains it's information in the mac-address table. The mac-address can't be a special address or multicast address.
                       hwCfgFdbVlanId 1.3.6.1.4.1.2011.5.25.42.2.1.2.1.2 vlanindex no-access
The VLAN name or other identifier referring to the VLAN which is correlative to the hwFdbMac.
                       hwCfgFdbVsiName 1.3.6.1.4.1.2011.5.25.42.2.1.2.1.3 octet string no-access
The VSI-ID or other identifier referring to the VSI which is correlative to the hwFdbMac.
                       hwCfgFdbPort 1.3.6.1.4.1.2011.5.25.42.2.1.2.1.4 interfaceindexorzero read-only
The forwarding port. The port must be an ethernet port. And the port must be contained by the hwFdbVlanId or allow the hwFdbVlanId get across through itself.
                       hwCfgFdbType 1.3.6.1.4.1.2011.5.25.42.2.1.2.1.5 integer read-only
The mac-address table item type of this entry. The meanings of the values are: static(2)- the mac-address is configured by user, doesn't aging out, and this entry doesn't lost after the device/FSU is reset or FSU is pulled out. blackhole(3)- the mac-address is configured by user for discarding frame which contains specific destination mac-address, doesn't aging out, and this entry doesn't lost after the device/FSU is reset or FSU is pulled out. When the type is dynamic ,the item can't be created. Enumeration: 'static': 2, 'blackhole': 3.
                       hwCfgFdbRowstatus 1.3.6.1.4.1.2011.5.25.42.2.1.2.1.6 rowstatus read-only
The operating state of the row.
                       hwCfgFdbAtmPort 1.3.6.1.4.1.2011.5.25.42.2.1.2.1.7 interfaceindexorzero read-only
The forwarding port. The port must be an atm port.
                       hwCfgFdbVpi 1.3.6.1.4.1.2011.5.25.42.2.1.2.1.8 integer32 read-only
The Virtual Path Identifier.
                       hwCfgFdbVci 1.3.6.1.4.1.2011.5.25.42.2.1.2.1.9 integer32 read-only
The Virtual Connection Identifier.
                       hwCfgFdbCeDefault 1.3.6.1.4.1.2011.5.25.42.2.1.2.1.10 integer read-only
The flag indicates whether the MAC address entry is configed according to ce-default-vlan. 'no-ce-default(0)' indicates no, 'ce-default(1)' indicates yes Enumeration: 'ceDefault': 1, 'noCeDefault': 0.
               hwdbDynFdbTable 1.3.6.1.4.1.2011.5.25.42.2.1.3 no-access
The layer 2 Dynamic (Leaned)mac-address forwarding table .The table that contains the layer 2 mac-address forwarding information currently operating on this device.
                   hwdbDynFdbEntry 1.3.6.1.4.1.2011.5.25.42.2.1.3.1 no-access
Entries of The layer 2 mac-address forwarding table.
                       hwDynFdbMac 1.3.6.1.4.1.2011.5.25.42.2.1.3.1.1 macaddress no-access
A unicast MAC address for which the device contains it's information in the mac-address table. The mac-address can't be a special address or multicast address.
                       hwDynFdbVlanId 1.3.6.1.4.1.2011.5.25.42.2.1.3.1.2 vlanindex no-access
The VLAN name or other identifier referring to the VLAN which is correlative to the hwFdbMac.
                       hwDynFdbVsiName 1.3.6.1.4.1.2011.5.25.42.2.1.3.1.3 octet string no-access
The VSI-ID or other identifier referring to the VSI which is correlative to the hwFdbMac.
                       hwDynFdbPort 1.3.6.1.4.1.2011.5.25.42.2.1.3.1.4 interfaceindexorzero read-only
The forwarding port. The port must be an ethernet port. And the port must be contained by the hwFdbVlanId or allow the hwFdbVlanId get across through itself.
                       hwDynFdbAtmPort 1.3.6.1.4.1.2011.5.25.42.2.1.3.1.5 interfaceindexorzero read-only
The forwarding port. The port must be an atm port.
                       hwDynFdbVpi 1.3.6.1.4.1.2011.5.25.42.2.1.3.1.6 integer32 read-only
The Virtual Path Identifier.
                       hwDynFdbVci 1.3.6.1.4.1.2011.5.25.42.2.1.3.1.7 integer32 read-only
The Virtual Connection Identifier.
                       hwDynFdbRowstatus 1.3.6.1.4.1.2011.5.25.42.2.1.3.1.8 rowstatus read-only
The operating state of the row.
                       hwDynSecurityFdbToStaticEnable 1.3.6.1.4.1.2011.5.25.42.2.1.3.1.9 enablevalue read-only
When this object is set to 'Enable(1)',if port security is enabled , the dynamic mac will convert to static.
               hwMacLimitTable 1.3.6.1.4.1.2011.5.25.42.2.1.4 no-access
A table containing the mac-address learning-limit rule information for device. It can limit on ethernet interface,vlan,ethernet interface + vlan.
                   hwMacLimitEntry 1.3.6.1.4.1.2011.5.25.42.2.1.4.1 no-access
Entries of the mac-address learning-limit table.
                       hwMacLimitPort 1.3.6.1.4.1.2011.5.25.42.2.1.4.1.1 interfaceindexorzero no-access
The port number which will be configured mac-limit.
                       hwMacLimitVlanId 1.3.6.1.4.1.2011.5.25.42.2.1.4.1.2 integer32 no-access
The vlan id which will be configured mac-limit.
                       hwMacLimitVsiName 1.3.6.1.4.1.2011.5.25.42.2.1.4.1.3 octet string no-access
The vsi name which will be configured mac-limit.
                       hwMacLimitMaxMac 1.3.6.1.4.1.2011.5.25.42.2.1.4.1.4 integer32 read-only
The maximum mac address. When the value is '0', the meaning is that there isn't limiting rule to the mac-address number.
                       hwMacLimitMaxRate 1.3.6.1.4.1.2011.5.25.42.2.1.4.1.5 integer32 read-only
The max mac-address learning rate. When the valu e is '0', the meaning is that there isn't limiting rule to the learning rate.
                       hwMacLimitAction 1.3.6.1.4.1.2011.5.25.42.2.1.4.1.6 integer read-only
The mac-address limit action of this entry. The meanings of the values are: discard(1)- Discard packets forward(2)- Forward packets. Enumeration: 'forward': 2, 'discard': 1.
                       hwMacLimitAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.4.1.7 integer read-only
The mac-limit alarm switch of this entry. The meanings of the values are: disable(1), enable(2) Enumeration: 'enable': 2, 'disable': 1.
                       hwMacLimitRowstatus 1.3.6.1.4.1.2011.5.25.42.2.1.4.1.8 rowstatus read-only
The operating state of the row.
                       hwMacAddressLearn 1.3.6.1.4.1.2011.5.25.42.2.1.4.1.9 integer read-only
The flag of enable Mac address learn. Enumeration: 'enable': 2, 'disable': 1.
                       hwMacDynAddressLearnNum 1.3.6.1.4.1.2011.5.25.42.2.1.4.1.10 integer32 read-only
The number of learned dynamic MAC address .
                       hwMacSecureAddressLearnNum 1.3.6.1.4.1.2011.5.25.42.2.1.4.1.11 integer32 read-only
The number of learned secure MAC address .
               hwMacUsageTable 1.3.6.1.4.1.2011.5.25.42.2.1.5 no-access
MAC usage table
                   hwMacUsageEntry 1.3.6.1.4.1.2011.5.25.42.2.1.5.1 no-access
MAC usage entry
                       hwMacEntityUsage 1.3.6.1.4.1.2011.5.25.42.2.1.5.1.1 integer32 read-only
MAC usage in every IO board
                       hwMacEntityUsageThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.5.1.2 integer32 read-write
MAC usage range
               hwdbCfg3tupleFdbTable 1.3.6.1.4.1.2011.5.25.42.2.1.6 no-access
The layer 2 configured mac-address forwarding table .The table that contains the layer 2 mac-address forwarding information currently operating on this device.
                   hwdbCfg3tupleFdbEntry 1.3.6.1.4.1.2011.5.25.42.2.1.6.1 no-access
Entries of The layer 2 mac-address forwarding table.
                       hwdbCfg3tupleFdbMac 1.3.6.1.4.1.2011.5.25.42.2.1.6.1.1 macaddress no-access
A unicast MAC address for which the device contains it's information in the mac-address table. The mac-address can't be a special address or multicast address.
                       hwdbCfg3tupleFdbVlanId 1.3.6.1.4.1.2011.5.25.42.2.1.6.1.2 integer32 no-access
The VLAN name or other identifier referring to the VLAN which is correlative to the hwFdbMac.
                       hwdbCfg3tupleFdbInPort 1.3.6.1.4.1.2011.5.25.42.2.1.6.1.3 interfaceindex no-access
The input port. The port must be an ethernet port. And the port must be contained by the hwFdbVlanId or allow the hwFdbVlanId get across through itself.
                       hwdbCfg3tupleFdbOutPort 1.3.6.1.4.1.2011.5.25.42.2.1.6.1.4 interfaceindex read-only
The forwarding port. The port must be an ethernet port. And the port must be contained by the hwFdbVlanId or allow the hwFdbVlanId get across through itself.
                       hwdbCfg3tupleFdbRowStatus 1.3.6.1.4.1.2011.5.25.42.2.1.6.1.5 rowstatus read-only
The operating state of the row.
               hwL2MacTraps 1.3.6.1.4.1.2011.5.25.42.2.1.7
                   hwMacUsageRaisingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.1
Beyond the configurated Mac usage
                   hwMacUsageFallingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.2
Resume the alarm of Mac usage
                   hwMacLimitNumRaisingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.3
Beyond the mac limited learning number
                   hwMacLimitNumFallingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.4
Resume the alarm of Mac usage
                   hwUntargetMacNumAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.7.5
Warning of untarget mac-address numbers.
                   hwPortSecRcvInsecurePktAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.7.6
Alarm of port perform the protect action shutdown or restrict when receiving insecure mac packets in the interface.
                   hwPwMacLimitNumRaisingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.7
The number of MAC addresses that are learnt based on the PW reaches the upper limit.
                   hwPwMacLimitNumFallingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.8
The number of MAC addresses that are learnt based on the PW falls below the upper limit.
                   hwPortStickyReachMaxAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.7.9
An alarm is generated when the number of sticky MAC address entries reaches the maximum value.
                   hwRecIllegalMacPktAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.7.10
The MAC addresses that received are illegal.
                   hwMacLimitOverThresholdAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.7.11
Beyond the mac limited learning number .
                   hwMacFlappingAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.7.12
Mac flapping alarm .
                   hwSlotMacLimitNumRaisingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.13
The number of MAC addresses that are learnt based on the SLOT reaches the upper limit.
                   hwSlotMacLimitNumFallingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.14
The number of MAC addresses that are learnt based on the SLOT falls below the upper limit.
                   hwL2ProtocolTunnelDropThresholdRaising 1.3.6.1.4.1.2011.5.25.42.2.1.7.15
The number of the protocol transmit on the port reach the drop threshold.
                   hwL2ProtocolTunnelDropThresholdFalling 1.3.6.1.4.1.2011.5.25.42.2.1.7.16
The number of the protocol transmit on the port below the drop threshold.
                   hwVsiMacLimitNumRaisingThresholdAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.7.17
The vsi Beyond the mac limited learning number .
                   hwVsiMacLimitNumRaisingThresholdAlarmClear 1.3.6.1.4.1.2011.5.25.42.2.1.7.18
The vsi release from the mac limited learning number .
                   hwMacLimitOverThresholdAlarmResume 1.3.6.1.4.1.2011.5.25.42.2.1.7.19
Less than the mac limited learning number .
                   hwSlotMacNumRaisingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.20
This notification indicates the MAC usage of the slot raising the threshold.
                   hwSlotMacNumFallingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.21
This notification indicates the MAC usage of the slot falling the threshold.
                   hwMacLimitRuleNumRaisingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.22
Mac address is beyond the threshold of the global mac limit rule
                   hwMacLimitRuleNumFallingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.23
Mac address is fall behind the threshold of the global mac limit rule.
                   hwVplsOverGRENotSupportForwardRising 1.3.6.1.4.1.2011.5.25.42.2.1.7.24
The public network tunnel used to carry the VPLS PW is a GRE tunnel and the VPLS PW cannot forward traffic.
                   hwVplsOverGRENotSupportForwardRisingResume 1.3.6.1.4.1.2011.5.25.42.2.1.7.25
The public network tunnel used to carry the VPLS PW is a non-GRE tunnel and the VPLS PW can forward traffic again.
                   hwIfInputUnucFlowRisingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.28
Unknown unicast flow is beyond the alarm threshold.
                   hwIfInputUnucFlowFallingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.29
Unknown unicast flow is fall behind the alarm threshold.
                   hwMacHopAlarmRisingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.30
Mac hop is beyond the alarm threshold.
                   hwMacHopAlarmFallingThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.7.31
Mac hop is fall behind the alarm threshold.
                   hwPstBroadcastLostAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.7.32
The board cannot receive pst broadcast packet from other boards in one minute.
                   hwPstBroadcastLostResume 1.3.6.1.4.1.2011.5.25.42.2.1.7.33
The board can receive pst broadcast packet from other boards in one minute.
                   hwPwMacSpoofingAttackAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.7.34
A PW received MAC spoofing packets from an interface.
                   hwPwMacSpoofingAttackAlarmClear 1.3.6.1.4.1.2011.5.25.42.2.1.7.35
The alarm indicating that a PW received MAC spoofing packets from an interface was cleared.
                   hwBdMacLimitOverThresholdAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.7.36
Beyond the mac limited learning number.
                   hwBdMacLimitOverThresholdAlarmResume 1.3.6.1.4.1.2011.5.25.42.2.1.7.37
Less than the mac limited learning number.
               hwUntargetMacNum 1.3.6.1.4.1.2011.5.25.42.2.1.8 counter64 read-only
The number of untarget mac-address.
               hwMacAgingTime 1.3.6.1.4.1.2011.5.25.42.2.1.9 integer32 read-write
The interval that the hardware deletes any entry whose hit bit is cleared and clears the hit bit of the remaining entries.The default value is 300 seconds.'0'means the MAC entries will be never aged.
               hwMacRestrict 1.3.6.1.4.1.2011.5.25.42.2.1.10 enabledstatus read-write
This object indicates whether MAC address learning restrict has been enabled for the system.
               hwPortSecurityTable 1.3.6.1.4.1.2011.5.25.42.2.1.11 no-access
A table containing the port security information for device. It can protect the port from inaccessible mac.
                     hwPortSecurityEntry 1.3.6.1.4.1.2011.5.25.42.2.1.11.1 no-access
Entries of the port security table.
                         hwPortSecurityPort 1.3.6.1.4.1.2011.5.25.42.2.1.11.1.1 interfaceindexorzero no-access
The port number which will be configured port security.
                         hwPortSecurityEnabled 1.3.6.1.4.1.2011.5.25.42.2.1.11.1.2 enabledstatus read-write
When this object is set to 'enabled(1)' Port security is enabled on this port else disabled.
                         hwPortSecurityProtectAction 1.3.6.1.4.1.2011.5.25.42.2.1.11.1.3 integer read-write
The port security protect action of this entry. The meanings of the values are: restrict(1)- shutdown the port protect(2)- discard the unknow source mac packets and not learn shutdown(3)- send trap noaction(4)- broadcast the packet . Enumeration: 'restrict': 1, 'protect': 2, 'shutdown': 3, 'noaction': 4.
                         hwPortSecurityAllDynToStaticEnable 1.3.6.1.4.1.2011.5.25.42.2.1.11.1.4 enablevalue read-write
When this object is set to 'enable(1)' all dynamic mac-address on the Port will convert to static.
                         hwPortSecurityAllDynToStickyEnable 1.3.6.1.4.1.2011.5.25.42.2.1.11.1.5 enablevalue read-write
When this object is set to enable and port security is enabled, the dynamic MAC address entry will be changed to a sticky MAC address entry.
                         hwPortSecurityMaxMacNum 1.3.6.1.4.1.2011.5.25.42.2.1.11.1.6 integer32 read-write
The maximum mac address can be learned based on the port.
               hwMacLimitGlobalRuleTable 1.3.6.1.4.1.2011.5.25.42.2.1.12 no-access
A table containing the global mac-address learning-limit rules information for device.
                     hwMacLimitGlobalRuleEntry 1.3.6.1.4.1.2011.5.25.42.2.1.12.1 no-access
Entries of the global mac-address learning-limit rule table.
                         hwMacLimitGlobalRuleName 1.3.6.1.4.1.2011.5.25.42.2.1.12.1.1 octet string no-access
The global mac-address learning-limit rule name.
                         hwMacLimitRuleMaxMac 1.3.6.1.4.1.2011.5.25.42.2.1.12.1.11 integer32 read-only
The maximum mac address. When the value is '0', the meaning is that there isn't limiting rule to the mac-address number.
                         hwMacLimitRuleMaxRate 1.3.6.1.4.1.2011.5.25.42.2.1.12.1.12 integer32 read-only
The max mac-address learning rate. When the valu e is '0', the meaning is that there isn't limiting rule to the learning rate.
                         hwMacLimitRuleAction 1.3.6.1.4.1.2011.5.25.42.2.1.12.1.13 integer read-only
The mac-address limit action of this entry. The meanings of the values are: discard(1)- Discard packets forward(2)- Forward packets. Enumeration: 'forward': 2, 'discard': 1.
                         hwMacLimitRuleAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.12.1.14 integer read-only
The mac-limit alarm switch of this entry. The meanings of the values are: disable(1), enable(2) Enumeration: 'enable': 2, 'disable': 1.
                         hwMacLimitRuleRowstatus 1.3.6.1.4.1.2011.5.25.42.2.1.12.1.51 rowstatus read-only
The operating state of the row.
                         hwMacRuleDynAddressLearnNum 1.3.6.1.4.1.2011.5.25.42.2.1.12.1.52 integer32 read-only
The number of dynamic MAC address learned by the board.
               hwMacLimitApplyRuleTable 1.3.6.1.4.1.2011.5.25.42.2.1.13 no-access
A table containing the global mac-address learning-limit rules and apply ports.
                     hwMacLimitApplyRuleEntry 1.3.6.1.4.1.2011.5.25.42.2.1.13.1 no-access
Entries of the global mac-address learning-limit rules and apply ports table.
                         hwMacLimitApplyPort 1.3.6.1.4.1.2011.5.25.42.2.1.13.1.1 interfaceindexorzero no-access
The port number which apply the global mac-address learning-limit rule.
                         hwMacLimitApplyVlanId 1.3.6.1.4.1.2011.5.25.42.2.1.13.1.2 integer32 no-access
The vlan id which apply the global mac-address learning-limit rule.
                         hwMacLimitApplyRuleName 1.3.6.1.4.1.2011.5.25.42.2.1.13.1.11 octet string read-only
The global mac-address learning-limit rule name.
                         hwMacLimitApplyRowstatus 1.3.6.1.4.1.2011.5.25.42.2.1.13.1.51 rowstatus read-only
The operating state of the row.
               hwMacGlobalStatistics 1.3.6.1.4.1.2011.5.25.42.2.1.14 integer32 read-only
The number of the global mac-address items.
               hwMacIfStatisticsTable 1.3.6.1.4.1.2011.5.25.42.2.1.15 no-access
A table showing the number of mac-address items by interface index.
                     hwMacIfStatisticsEntry 1.3.6.1.4.1.2011.5.25.42.2.1.15.1 no-access
Entries of the statistics of mac-address table.
                         hwMacIfStatisticsIfIndex 1.3.6.1.4.1.2011.5.25.42.2.1.15.1.1 interfaceindex no-access
The interface index which is correlative to the hwIfMacStatistics table.
                         hwMacIfStatistics 1.3.6.1.4.1.2011.5.25.42.2.1.15.1.2 integer32 read-only
The number of the mac-address items.
               hwMacSlotStatisticsTable 1.3.6.1.4.1.2011.5.25.42.2.1.16 no-access
A table showing the number of mac-address items by slot ID.
                     hwMacSlotStatisticsEntry 1.3.6.1.4.1.2011.5.25.42.2.1.16.1 no-access
Entries of the statistics of mac-address table.
                         hwMacSlotStatisticsSlotId 1.3.6.1.4.1.2011.5.25.42.2.1.16.1.1 integer32 no-access
The slot ID which is correlative to the hwMacSlotStatistics table.
                         hwMacSlotStatistics 1.3.6.1.4.1.2011.5.25.42.2.1.16.1.2 integer32 read-only
The number of the mac-address items by slot ID.
                         hwMacSlotStatisticsSpecify 1.3.6.1.4.1.2011.5.25.42.2.1.16.1.3 integer32 read-only
The specify max number of the mac-address items by slot ID.
               hwMacVlanStatisticsTable 1.3.6.1.4.1.2011.5.25.42.2.1.17 no-access
A table showing the number of mac-address items by VLAN ID.
                     hwMacVlanStatisticsEntry 1.3.6.1.4.1.2011.5.25.42.2.1.17.1 no-access
Entries of the statistics of mac-address table.
                         hwMacVlanStatisticsVlanId 1.3.6.1.4.1.2011.5.25.42.2.1.17.1.1 vlanid no-access
The VLAN ID which is correlative to the hwMacVlanStatistics table.
                         hwMacVlanStatistics 1.3.6.1.4.1.2011.5.25.42.2.1.17.1.2 integer32 read-only
The number of the mac-address items.
               hwMacVsiStatisticsTable 1.3.6.1.4.1.2011.5.25.42.2.1.18 no-access
A table showing the number of mac-address items by VSI name.
                     hwMacVsiStatisticsEntry 1.3.6.1.4.1.2011.5.25.42.2.1.18.1 no-access
Entries of the statistics of mac-address table.
                         hwMacVsiStatisticsVsiName 1.3.6.1.4.1.2011.5.25.42.2.1.18.1.1 octet string no-access
The VSI name which is correlative to the hwMacVsiStatistics table.
                         hwMacVsiStatistics 1.3.6.1.4.1.2011.5.25.42.2.1.18.1.2 integer32 read-only
The number of the mac-address items.
               hwPwMacLimitTable 1.3.6.1.4.1.2011.5.25.42.2.1.19 no-access
This is a rule table for PW-based MAC learning limit.
                     hwPwMacLimitEntry 1.3.6.1.4.1.2011.5.25.42.2.1.19.1 no-access
Entries of a rule table for PW-based MAC learning limit.
                         hwPwMacLimitVsiName 1.3.6.1.4.1.2011.5.25.42.2.1.19.1.1 octet string no-access
This object indicates the name of the VSI that is configured with PW-based MAC learning limit.
                         hwPwMacLimitPwName 1.3.6.1.4.1.2011.5.25.42.2.1.19.1.2 octet string no-access
This object indicates the name of the PW that is configured with PW-based MAC learning limit.
                         hwPwMacLimitMaxMac 1.3.6.1.4.1.2011.5.25.42.2.1.19.1.3 integer32 read-only
The value of this object specifies the maximum number of MAC addresses that can be learnt. 0 indicates no limit.
                         hwPwMacLimitMaxRate 1.3.6.1.4.1.2011.5.25.42.2.1.19.1.4 integer32 read-only
The value of this object specifies the maximum rate for MAC address learning. 0 indicates no limit.
                         hwPwMacLimitAction 1.3.6.1.4.1.2011.5.25.42.2.1.19.1.5 integer read-only
The value of this object specifies whether packets are forwarded or discarded after the number of MAC addresses that are learnt reaches the upper limit: 1: packets are discarded 2: packets are forwarded Enumeration: 'forward': 2, 'discard': 1.
                         hwPwMacLimitAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.19.1.6 enabledstatus read-only
The value of this object specifies whether the alarm is enabled or disabled after the number of MAC addresses that are learnt reaches the upper limit: 1: alarm is enabled 2: alarm is disabled
                         hwPwMacLimitRowstatus 1.3.6.1.4.1.2011.5.25.42.2.1.19.1.7 rowstatus read-only
This object indicates the RowStatus of hwPwMacLimitTable.
                         hwPwMacAddressLearn 1.3.6.1.4.1.2011.5.25.42.2.1.19.1.8 enabledstatus read-only
The object indicates whether MAC learning is enabled.
                         hwPwMacDynAddressLearnNum 1.3.6.1.4.1.2011.5.25.42.2.1.19.1.9 integer32 read-only
The value of this object specifies the number of dynamic MAC addresses that are learnt.
               hwMacSpoofingDefendTable 1.3.6.1.4.1.2011.5.25.42.2.1.20 no-access
A table enable the MAC spoofing defend.
                     hwMacSpoofingDefendEntry 1.3.6.1.4.1.2011.5.25.42.2.1.20.1 no-access
Entries of the MAC spoofing defend table.
                         hwMacSpoofingDefendPort 1.3.6.1.4.1.2011.5.25.42.2.1.20.1.1 interfaceindexorzero no-access
The port number which will be configured 1.1.1 MAC spoofing defend.
                         hwMacSpoofingDefendEnabled 1.3.6.1.4.1.2011.5.25.42.2.1.20.1.2 enabledstatus read-write
When this object is set to 'enabled(1)' MAC spoofing defend is enabled on this port else disabled.
               hwDiscardIllegalMacEnable 1.3.6.1.4.1.2011.5.25.42.2.1.21 enabledstatus read-write
When this object is set to 'enabled(1)' illegal MAC will be discarded.
               hwDiscardIllegalMacAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.22 enabledstatus read-write
When this object is set to 'enabled(1)' discard illegal MAC alarm is enabled else disabled.
               hwMacSpoofingDefend 1.3.6.1.4.1.2011.5.25.42.2.1.23 enabledstatus read-write
When this object is set to 'enabled(1)' MAC spoofing defend is enabled on global else disabled.
               hwL2MacFlappingTrapObjects 1.3.6.1.4.1.2011.5.25.42.2.1.24
                     hwMacflappingMac 1.3.6.1.4.1.2011.5.25.42.2.1.24.1 octet string no-access
The flapping mac-address.
                     hwMacFlappingVlan 1.3.6.1.4.1.2011.5.25.42.2.1.24.2 integer32 no-access
The vlan of flapping mac.
               hwSlotMacLimitTable 1.3.6.1.4.1.2011.5.25.42.2.1.25 no-access
This is a rule table for SLOT-based MAC learning limit.
                     hwSlotMacLimitEntry 1.3.6.1.4.1.2011.5.25.42.2.1.25.1 no-access
Entries of a rule table for SLOT-based MAC learning limit.
                         hwSlotMacLimitId 1.3.6.1.4.1.2011.5.25.42.2.1.25.1.1 integer32 no-access
This object indicates id of the SLOT that is configured with SLOT-based MAC learning limit.
                         hwSlotMacLimitMaxMac 1.3.6.1.4.1.2011.5.25.42.2.1.25.1.2 integer32 read-only
The value of this object specifies the maximum number of MAC addresses that can be learnt. 0 indicates no limit.
                         hwSlotMacLimitMaxRate 1.3.6.1.4.1.2011.5.25.42.2.1.25.1.3 integer32 read-only
The value of this object specifies the maximum rate for MAC address learning. 0 indicates no limit.
                         hwSlotMacLimitAction 1.3.6.1.4.1.2011.5.25.42.2.1.25.1.4 integer read-only
The value of this object specifies whether packets are forwarded or discarded after the number of MAC addresses that are learnt reaches the upper limit: 1: packets are discarded 2: packets are forwarded Enumeration: 'forward': 2, 'discard': 1.
                         hwSlotMacLimitAlarm 1.3.6.1.4.1.2011.5.25.42.2.1.25.1.5 integer read-only
The value of this object specifies whether the alarm is enabled or disabled after the number of MAC addresses that are learnt reaches the upper limit: 1: alarm is enabled 2: alarm is disabled Enumeration: 'enable': 2, 'disable': 1.
                         hwSlotMacLimitRowstatus 1.3.6.1.4.1.2011.5.25.42.2.1.25.1.6 rowstatus read-only
This object indicates the RowStatus of hwSlotMacLimitTable.
               hwL2ProtocolTunnelTrapObjects 1.3.6.1.4.1.2011.5.25.42.2.1.26
                     hwL2ProtocolTunnelTrapPortName 1.3.6.1.4.1.2011.5.25.42.2.1.26.1 octet string no-access
The port name for layer 2 protocol tunnel trap.
                     hwL2ProtocolTunnelTrapProtocolName 1.3.6.1.4.1.2011.5.25.42.2.1.26.2 octet string no-access
The protocol name for layer 2 protocol tunnel trap.
                     hwL2ProtocolTunnelTrapDropThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.26.3 integer32 no-access
The drop rangle of layer 2 protocol tunnel.
               hwL2ProtclTnlStdTable 1.3.6.1.4.1.2011.5.25.42.2.1.27 no-access
Group-MAC configuration table of standard L2 protocol tunnel.
                     hwL2ProtclTnlStdEntry 1.3.6.1.4.1.2011.5.25.42.2.1.27.1 no-access
This object indicates Group-MAC configuration table for standard L2 protocol tunnel.
                         hwL2ProtclTnlStdProtclName 1.3.6.1.4.1.2011.5.25.42.2.1.27.1.1 octet string no-access
This object indicates protocol name of standard L2 protocol tunnel.
                         hwL2ProtclTnlStdProtclMacAddr 1.3.6.1.4.1.2011.5.25.42.2.1.27.1.2 macaddress read-only
This object indicates protocol MAC-Address of standard L2 protocol tunnel.
                         hwL2ProtclTnlStdEncapType 1.3.6.1.4.1.2011.5.25.42.2.1.27.1.3 integer read-only
This object indicates encapsulation type of standard L2 protocol tunnel. Enumeration: 'snap': 2, 'llc': 3, 'ethernetii': 1, 'others': 4.
                         hwL2ProtclTnlStdProtclType 1.3.6.1.4.1.2011.5.25.42.2.1.27.1.4 integer32 read-only
This object indicates protocol type of standard L2 protocol tunnel.
                         hwL2ProtclTnlStdGroupMacAddr 1.3.6.1.4.1.2011.5.25.42.2.1.27.1.5 macaddress read-write
This object indicates group-MAC of standard L2 protocol tunnel.
                         hwL2ProtclTnlStdGroupDefault 1.3.6.1.4.1.2011.5.25.42.2.1.27.1.6 macaddress read-write
This object indicates default group-MAC(0100-0ccd-cdd0) of standard L2 protocol tunnel.
                         hwL2ProtclTnlStdPriority 1.3.6.1.4.1.2011.5.25.42.2.1.27.1.7 integer32 read-write
This object indicates priority of standard L2 protocol tunnel.
               hwL2ProtclTnlCusTable 1.3.6.1.4.1.2011.5.25.42.2.1.28 no-access
Group-MAC configuration table of customize L2 protocol tunnel.
                     hwL2ProtclTnlCusEntry 1.3.6.1.4.1.2011.5.25.42.2.1.28.1 no-access
This object indicates Group-MAC configuration table for customize L2 protocol tunnel.
                         hwL2ProtclTnlCusProtclName 1.3.6.1.4.1.2011.5.25.42.2.1.28.1.1 octet string no-access
This object indicates protocol name of customize L2 protocol tunnel.
                         hwL2ProtclTnlCusProtclMacAddr 1.3.6.1.4.1.2011.5.25.42.2.1.28.1.2 macaddress read-only
This object indicates protocol MAC-Address of customize L2 protocol tunnel.
                         hwL2ProtclTnlCusEncapType 1.3.6.1.4.1.2011.5.25.42.2.1.28.1.3 integer read-only
This object indicates encapsulation type of customize L2 protocol tunnel. Enumeration: 'snap': 2, 'llc': 3, 'ethernetii': 1, 'others': 4.
                         hwL2ProtclTnlCusProtclType 1.3.6.1.4.1.2011.5.25.42.2.1.28.1.4 integer32 read-only
This object indicates protocol type of customize L2 protocol tunnel.
                         hwL2ProtclTnlCusGroupMacAddr 1.3.6.1.4.1.2011.5.25.42.2.1.28.1.5 macaddress read-only
This object indicates group-MAC of customize L2 protocol tunnel.
                         hwL2ProtclTnlCusGroupDefault 1.3.6.1.4.1.2011.5.25.42.2.1.28.1.6 macaddress read-only
This object indicates default group-MAC(0100-0ccd-cdd0) of customize L2 protocol tunnel.
                         hwL2ProtclTnlCusPriority 1.3.6.1.4.1.2011.5.25.42.2.1.28.1.7 integer32 read-only
This object indicates priority of customize L2 protocol tunnel.
                         hwL2ProtclTnlCusRowStatus 1.3.6.1.4.1.2011.5.25.42.2.1.28.1.8 rowstatus read-only
Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfTermTable pointing to the row, the agent must also destroy the corresponding entries in hwL2ProtclTnlCusTable.
               hwL2ProtclTnlEnableTable 1.3.6.1.4.1.2011.5.25.42.2.1.29 no-access
Port configuration table of L2 protocol tunnel.
                     hwL2ProtclTnlEnableEntry 1.3.6.1.4.1.2011.5.25.42.2.1.29.1 no-access
This object indicates port configuration table of L2 protocol tunnel.
                         hwL2ProtclTnlEnableIfIndex 1.3.6.1.4.1.2011.5.25.42.2.1.29.1.1 interfaceindex no-access
This object indicates interface index of port configuration of L2 protocol tunnel.
                         hwL2ProtclTnlEnableProtclName 1.3.6.1.4.1.2011.5.25.42.2.1.29.1.2 octet string no-access
This object indicates protocol name of port configuration of L2 protocol tunnel.
                         hwL2ProtclTnlEnableTransMode 1.3.6.1.4.1.2011.5.25.42.2.1.29.1.3 integer read-only
This object indicates transparent mode of port configuration of L2 protocol tunnel. Enumeration: 'untagged': 2, 'tagged': 1.
                         hwL2ProtclTnlEnableTagListLow 1.3.6.1.4.1.2011.5.25.42.2.1.29.1.4 octet string read-only
This object indicates VLAN list low of port configuration of L2 protocol tunnel.
                         hwL2ProtclTnlEnableTagListHigh 1.3.6.1.4.1.2011.5.25.42.2.1.29.1.5 octet string read-only
This object indicates VLAN list high of port configuration of L2 protocol tunnel.
                         hwL2ProtclTnlEnableDropthresholdRate 1.3.6.1.4.1.2011.5.25.42.2.1.29.1.6 integer32 read-write
This object indicates drop threshold rate(packet per second) of port configuration of L2 protocol tunnel.
                         hwL2ProtclTnlEnableRowStatus 1.3.6.1.4.1.2011.5.25.42.2.1.29.1.7 rowstatus read-only
Used for controlling the creation and deletion of this row. All writeable objects in this row may be modified at any time. If a Network Management Application attempts to delete a conceptual row by setting this object to 'destroy' and there are one or more entries in hwQinQSubIfTermTable pointing to the row, the agent must also destroy the corresponding entries in hwL2ProtclTnlEnableTable.
               hwL2ProtclTnlStatisticsTable 1.3.6.1.4.1.2011.5.25.42.2.1.30 no-access
Statistics table of L2 protocol tunnel.
                     hwL2ProtclTnlStatisticsEntry 1.3.6.1.4.1.2011.5.25.42.2.1.30.1 no-access
This object indicates statistics table of L2 protocol tunnel.
                         hwL2ProtclTnlStatisticsIfIndex 1.3.6.1.4.1.2011.5.25.42.2.1.30.1.1 interfaceindex no-access
This object indicates interface index of statistics table of L2 protocol tunnel.
                         hwL2ProtclTnlStatisticsProtclName 1.3.6.1.4.1.2011.5.25.42.2.1.30.1.2 octet string no-access
This object indicates protocol name of statistics table of L2 protocol tunnel.
                         hwL2ProtclTnlStatisticsDropthrhldRate 1.3.6.1.4.1.2011.5.25.42.2.1.30.1.3 integer32 read-only
This object indicates drop threshold rate(packets per second) of statistics table of L2 protocol tunnel.
                         hwL2ProtclTnlStatisticsInputPkts 1.3.6.1.4.1.2011.5.25.42.2.1.30.1.4 integer32 read-only
This object indicates the number of input packets of statistics table of L2 protocol tunnel.
                         hwL2ProtclTnlStatisticsOutputPkts 1.3.6.1.4.1.2011.5.25.42.2.1.30.1.5 integer32 read-only
This object indicates the number of output packets of statistics table of L2 protocol tunnel.
                         hwL2ProtclTnlStatisticsDropPkts 1.3.6.1.4.1.2011.5.25.42.2.1.30.1.6 integer32 read-only
This object indicates the number of drop packets of statistics table of L2 protocol tunnel.
               hwBridgeMacAgingTime 1.3.6.1.4.1.2011.5.25.42.2.1.31 integer32 read-write
The interval that the hardware deletes any entry whose hit bit is cleared and clears the hit bit of the remaining entries.The default value is 300 seconds.'0'means the MAC entries will be never aged.
               hwCfgMacAddrQueryTable 1.3.6.1.4.1.2011.5.25.42.2.1.32 no-access
The query table of layer 2 Configured mac-address forwarding table.
                     hwCfgMacAddrQueryEntry 1.3.6.1.4.1.2011.5.25.42.2.1.32.1 no-access
Match entries of layer 2 Configured mac-address forwarding table lookup.
                         hwCfgMacAddrQueryVlanId 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.1 vlanidornone no-access
The VLAN ID for index of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryVsiName 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.2 octet string no-access
The vsi name for index of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQuerySiName 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.3 octet string no-access
The service instance name for index of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryBridgeId 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.4 integer32 no-access
The bridge ID for index of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryMacAddr 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.5 macaddress no-access
A unicast MAC address for index of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryConditionMode 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.6 integer no-access
Mode for query condition of layer 2 Configured mac-address query table. Enumeration: 'showbymac': 2, 'showbytypevlan': 5, 'showbymacvlan': 3, 'showbyportvlan': 10, 'showbytype': 4, 'showall': 1, 'showbytypeportvlan': 7, 'showbyvlan': 8, 'showbyport': 9, 'showbytypevsi': 12, 'showbytypeportvsi': 13, 'showbyportvsi': 15, 'showbytypeport': 6, 'showbymacvsi': 11, 'showbyvsi': 14.
                         hwCfgMacAddrQueryConditionStringA 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.7 octet string no-access
String A (may be VSI or SI etc.) for query condition of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryConditionStringB 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.8 octet string no-access
String B (may be MAC or MAC type etc.) for query condition of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryConditionDigitA 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.9 unsigned32 no-access
Digit A (may be VLAN ID etc.) for query condition of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryConditionDigitB 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.10 unsigned32 no-access
Digit B (may be IF index etc.) for query condition of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryConditionDigitC 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.11 unsigned32 no-access
Digit C (other integer info) for query condition of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryType 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.12 octet string read-only
The entry type for match item of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryIfIndex 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.13 interfaceindexorzero read-only
The interface index for match item of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryPeVlanId 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.14 vlanidornone read-only
The PE VLAN ID for match item of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryCeVlanId 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.15 vlanidornone read-only
The CE VLAN ID for match item of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryCedefaultFlag 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.16 integer read-only
The CE default flag for match item of layer 2 Configured mac-address query table. Enumeration: 'cedefault': 1, 'nocedefault': 0.
                         hwCfgMacAddrQueryAtmIfIndex 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.17 interfaceindexorzero read-only
The ATM interface index for match item of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryVpi 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.18 integer32 read-only
The VPI for match item of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryVci 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.19 integer32 read-only
The VCI for match item of layer 2 Configured mac-address query table.
                         hwCfgMacAddrQueryMacTunnel 1.3.6.1.4.1.2011.5.25.42.2.1.32.1.20 octet string read-only
The MAC tunnel for match item of layer 2 Configured mac-address query table.
               hwDynMacAddrQueryTable 1.3.6.1.4.1.2011.5.25.42.2.1.33 no-access
The query table of layer 2 dynamic mac-address forwarding table.
                     hwDynMacAddrQueryEntry 1.3.6.1.4.1.2011.5.25.42.2.1.33.1 no-access
Match entries of layer 2 dynamic mac-address forwarding table lookup.
                         hwDynMacAddrQueryVlanId 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.1 vlanidornone no-access
The VLAN ID for index of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryVsiName 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.2 octet string no-access
The vsi name for index of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQuerySiName 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.3 octet string no-access
The service instance name for index of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryBridgeId 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.4 integer32 no-access
The bridge ID for index of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryMacAddr 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.5 macaddress no-access
A unicast MAC address for index of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryConditionMode 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.6 integer no-access
Mode for query condition of layer 2 dynamic mac-address query table. Enumeration: 'showbyportvsi': 15, 'showbytypevlan': 5, 'showbytypeslotportvsi': 23, 'showbytypevsi': 12, 'showbymacvsi': 11, 'showbyvsi': 14, 'showbymac': 2, 'showbymacvlan': 3, 'showbytypeslotsourceslot': 18, 'showbyport': 9, 'showbytypeportvlan': 7, 'showbyvlan': 8, 'showbyvsipw': 16, 'showbytypeslotportvlan': 21, 'showbytype': 4, 'showbytypeslotvsi': 22, 'showall': 1, 'showbytypeslotvsipw': 24, 'showbyportvlan': 10, 'showbytypeslotvlan': 19, 'showbytypeport': 6, 'showbytypeslotport': 20, 'showbytypeportvsi': 13, 'showbytypeslot': 17.
                         hwDynMacAddrQueryConditionStringA 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.7 octet string no-access
String A (may be VSI or SI etc.) for query condition of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryConditionStringB 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.8 octet string no-access
String B (may be MAC or MAC type etc.) for query condition of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryConditionDigitA 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.9 unsigned32 no-access
Digit A (may be VLAN ID etc.) for query condition of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryConditionDigitB 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.10 unsigned32 no-access
Digit B (may be IF index etc.) for query condition of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryConditionDigitC 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.11 unsigned32 no-access
Digit C (other integer info) for query condition of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryType 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.12 octet string read-only
The entry type for match item of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryIfIndex 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.13 interfaceindexorzero read-only
The interface index for match item of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryPeVlanId 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.14 vlanidornone read-only
The PE VLAN ID for match item of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryCeVlanId 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.15 vlanidornone read-only
The CE VLAN ID for match item of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryAtmIfIndex 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.16 interfaceindexorzero read-only
The ATM interface index for match item of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryVpi 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.17 integer32 read-only
The VPI for match item of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryVci 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.18 integer32 read-only
The VCI for match item of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryPeerIp 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.19 ipaddress read-only
The peer ip address for match item of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryPwId 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.20 unsigned32 read-only
The PW ID for match item of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryMacTunnel 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.21 octet string read-only
The MAC tunnel for match item of layer 2 dynamic mac-address query table.
                         hwDynMacAddrQueryAgingTime 1.3.6.1.4.1.2011.5.25.42.2.1.33.1.22 integer32 read-only
The aging time for match item of layer 2 dynamic mac-address query table.
               hwMacInfoQueryTable 1.3.6.1.4.1.2011.5.25.42.2.1.34 no-access
The MAC address information of layer 2 mac-address database.
                     hwMacInfoQueryEntry 1.3.6.1.4.1.2011.5.25.42.2.1.34.1 no-access
Match information of layer 2 mac-address database.
                         hwMacInfoQueryConditionMode 1.3.6.1.4.1.2011.5.25.42.2.1.34.1.1 integer no-access
Mode for query condition of layer 2 dynamic mac-address query table. Enumeration: 'showtotalnumberbytypeslotvlan': 15, 'showtotalnumberbyvsipw': 13, 'showtotalnumberbyport': 7, 'showtotalnumberbyportvlan': 8, 'showtotalnumberbyvlan': 6, 'showtotalnumberbytype': 2, 'showtotalnumberbytypeport': 4, 'showtotalnumberbytypeslotportvsi': 19, 'showtotalnumberbytypevsi': 9, 'showtotalnumberbyall': 1, 'showtotalnumberbytypeslotvsipw': 20, 'showtotalnumberbyvsi': 11, 'showtotalnumberbytypeportvsi': 10, 'showtotalnumberbytypevlan': 3, 'showtotalnumberbytypeslotvsi': 18, 'showtotalnumberbytypeslot': 14, 'showtotalnumberbytypeslotport': 16, 'showtotalnumberbytypeportvlan': 5, 'showcapacity': 21, 'showtotalnumberbyportvsi': 12, 'showtotalnumberbytypeslotportvlan': 17.
                         hwMacInfoQueryConditionStringA 1.3.6.1.4.1.2011.5.25.42.2.1.34.1.2 octet string no-access
String A (may be VSI or SI etc.) for query condition of layer 2 mac-address database.
                         hwMacInfoQueryConditionStringB 1.3.6.1.4.1.2011.5.25.42.2.1.34.1.3 octet string no-access
String B (may be MAC or MAC type etc.) for query condition of layer 2 mac-address database.
                         hwMacInfoQueryConditionStringC 1.3.6.1.4.1.2011.5.25.42.2.1.34.1.4 octet string no-access
String C (may be MAC tunnel etc.) for query condition of layer 2 mac-address database.
                         hwMacInfoQueryConditionDigitA 1.3.6.1.4.1.2011.5.25.42.2.1.34.1.5 unsigned32 no-access
Digit A (may be VLAN ID etc.) for query condition of layer 2 mac-address database.
                         hwMacInfoQueryConditionDigitB 1.3.6.1.4.1.2011.5.25.42.2.1.34.1.6 unsigned32 no-access
Digit B (may be IF index etc.) for query condition of layer 2 mac-address database.
                         hwMacInfoQueryConditionDigitC 1.3.6.1.4.1.2011.5.25.42.2.1.34.1.7 unsigned32 no-access
Digit C (other integer info) for query condition of layer 2 mac-address database.
                         hwMacInfoQueryTotalNumber 1.3.6.1.4.1.2011.5.25.42.2.1.34.1.8 unsigned32 read-only
The total number for match condition of layer 2 mac-address database.
                         hwMacInfoQueryTotalLocalNumber 1.3.6.1.4.1.2011.5.25.42.2.1.34.1.9 unsigned32 read-only
The total local number for match condition of layer 2 mac-address database.
                         hwMacInfoQueryTotalRemoteNumber 1.3.6.1.4.1.2011.5.25.42.2.1.34.1.10 unsigned32 read-only
The total remote number for match condition of layer 2 mac-address database.
                         hwMacInfoQueryCapacity 1.3.6.1.4.1.2011.5.25.42.2.1.34.1.11 unsigned32 read-only
The capacity for match condition of layer 2 mac-address database.
               hwVplsOverGreTable 1.3.6.1.4.1.2011.5.25.42.2.1.35 no-access
A table containing the VPLS over GRE information for device.
                     hwVplsOverGreEntry 1.3.6.1.4.1.2011.5.25.42.2.1.35.1 no-access
Entries of the VPLS over GRE table.
                         hwVplsOverGrePwId 1.3.6.1.4.1.2011.5.25.42.2.1.35.1.1 integer32 no-access
The PW ID which will be configured over GRE.
                         hwRemoteIp 1.3.6.1.4.1.2011.5.25.42.2.1.35.1.2 ipaddress no-access
The remote ip address of the PW ID.
                         hwVplsOverGreVsiName 1.3.6.1.4.1.2011.5.25.42.2.1.35.1.3 octet string no-access
The vsi name which will be configured over GRE.
               hwVllByPassOverGreTable 1.3.6.1.4.1.2011.5.25.42.2.1.36 no-access
A table containing the ByPass PW for VLL over GRE information for device.
                     hwVllByPassOverGreEntry 1.3.6.1.4.1.2011.5.25.42.2.1.36.1 no-access
Entries of the ByPass PW for VLL over GRE table.
                         hwVLLACPortIndex 1.3.6.1.4.1.2011.5.25.42.2.1.36.1.1 integer32 no-access
The port index which will be configured ByPass for VLL.
                         hwVLLACPortName 1.3.6.1.4.1.2011.5.25.42.2.1.36.1.2 octet string no-access
The Port name which will be configured ByPass for VLL.
               hwUnucFlowAlarmTable 1.3.6.1.4.1.2011.5.25.42.2.1.37 no-access
A table containing the unknown unicast alarm information for interface.
                     hwUnucFlowAlarmEntry 1.3.6.1.4.1.2011.5.25.42.2.1.37.1 no-access
Entries of unknown unicast alarm information for interface table.
                         hwUNUCPortIndex 1.3.6.1.4.1.2011.5.25.42.2.1.37.1.1 integer32 no-access
The port index which will be configured unknown unicast alarm.
                         hwUNUCPortName 1.3.6.1.4.1.2011.5.25.42.2.1.37.1.2 octet string no-access
The Port name which will be configured unknown unicast alarm.
                         hwUNUCPortAlarmThreshold 1.3.6.1.4.1.2011.5.25.42.2.1.37.1.3 integer32 no-access
The port alarm threshold which will be configured unknown unicast alarm.
                         hwUNUCPortRealFlow 1.3.6.1.4.1.2011.5.25.42.2.1.37.1.4 integer32 no-access
The port real unuc flow.
               hwMacHopAlarmTable 1.3.6.1.4.1.2011.5.25.42.2.1.38 no-access
A table containing the mac hop alarm information.
                     hwMacHopAlarmEntry 1.3.6.1.4.1.2011.5.25.42.2.1.38.1 no-access
Entries of mac hop alarm information for interface table.
                         hwMacHopVlan 1.3.6.1.4.1.2011.5.25.42.2.1.38.1.1 unsigned32 no-access
The VLAN ID of mac hop.
                         hwMacHopVsiName 1.3.6.1.4.1.2011.5.25.42.2.1.38.1.2 octet string no-access
The VSI of mac hop.
                         hwMacHopBdID 1.3.6.1.4.1.2011.5.25.42.2.1.38.1.3 unsigned32 no-access
The BD id of mac hop.
                         hwMacHopPortName1 1.3.6.1.4.1.2011.5.25.42.2.1.38.1.4 octet string no-access
The Port name of Mac-hopping.
                         hwMacHopPortName2 1.3.6.1.4.1.2011.5.25.42.2.1.38.1.5 octet string no-access
The Port name of Mac-hopping.
                         hwMacHopPortName3 1.3.6.1.4.1.2011.5.25.42.2.1.38.1.6 octet string no-access
The Port name of Mac-hopping.
                         hwMacHopPortName4 1.3.6.1.4.1.2011.5.25.42.2.1.38.1.7 octet string no-access
The Port name of Mac-hopping.
                         hwMacHopPWInfo 1.3.6.1.4.1.2011.5.25.42.2.1.38.1.8 octet string no-access
The PW info of Mac-hopping.
               hwPwMacSpoofingAttackMacAddr 1.3.6.1.4.1.2011.5.25.42.2.1.39 macaddress no-access
A unicast MAC address for PW mac spoofing.
               hwBdMacLimitBdId 1.3.6.1.4.1.2011.5.25.42.2.1.40 integer32 no-access
The bd id which will be configured mac-limit.
               hwBdMacLimitMaxMac 1.3.6.1.4.1.2011.5.25.42.2.1.41 macaddress no-access
The maximum mac address. When the value is '0', the meaning is that there isn't limiting rule to the mac-address number.
           hwL2MAMConformance 1.3.6.1.4.1.2011.5.25.42.2.2
               hwL2MAMGroups 1.3.6.1.4.1.2011.5.25.42.2.2.1
                   hwL2MAMCfgFdbGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.1
A collection of objects providing information about level 2 configured mac-address table.
                   hwL2MAMDynFdbGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.2
A collection of objects providing information about level 2 Dynamic mac-address table.
                   hwL2MAMMacLimitGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.3
A collection of objects providing information about mac-address limit rules.
                   hwL2MAMMacUsageGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.4
A collection of objects providing information about mac-address usage.
                   hwdbCfg3tupleFdbGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.5
A collection of objects providing information about level 2 configured 3-tuple mac-address table.
                   hwL2MAMObjectsGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.6
A collection of objects providing information about mac-address configuration.
                   hwPortSecurityGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.7
A table containing the port security information for device. It can protect the port from unaccessible mac.
                   hwMacIfStatisticsGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.8
A collection of objects providing information about mac-address statistics by interface index.
                   hwMacSlotStatisticsGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.9
A collection of objects providing information about mac-address statistics by slot ID.
                   hwMacVlanStatisticsGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.10
A collection of objects providing information about mac-address statistics by VLAN ID.
                   hwMacVsiStatisticsGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.11
A collection of objects providing information about mac-address statistics by VSI name.
                   hwMacSpoofingDefendGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.12
A collection of objects providing information about MAC spoofing defend.
                   hwL2ProtocolTunnelTrapGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.13
A collection of items of objects information of L2 Protocol Tunnel Trap notify.
                   hwL2ProtclTnlStdProtclGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.14
A collection of items of configuration table of standard L2 protocol tunnel.
                   hwL2ProtclTnlCusProtclGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.15
A collection of items of configuration table of customize L2 protocol tunnel.
                   hwL2ProtclTnlEnableGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.16
A collection of items of port configuration of L2 protocol tunnel.
                   hwL2ProtclTnlStatisticsGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.17
A collection of items of port statistics of L2 protocol tunnel.
                   hwCfgMacAddrQueryTableGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.18
A collection of items of layer 2 Configured mac-address query table.
                   hwDynMacAddrQueryTableGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.19
A collection of items of layer 2 dynamic mac-address query table.
                   hwMacInfoQueryTableGroup 1.3.6.1.4.1.2011.5.25.42.2.2.1.20
A collection of items of layer 2 mac-address database query.
               hwL2MAMCompliances 1.3.6.1.4.1.2011.5.25.42.2.2.2
                   hwL2MAMCompliance 1.3.6.1.4.1.2011.5.25.42.2.2.2.1
The compliance statement for device support of Level 2 Mac-address management.
               hwL2MACTrapGroups 1.3.6.1.4.1.2011.5.25.42.2.2.3
                   hwBaseTrapGroup 1.3.6.1.4.1.2011.5.25.42.2.2.3.2
L2 MAC tap group.