HUAWEI-L2IF-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-L2IF-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, P-BRIDGE-MIB, HUAWEI-MIB, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwL2Mgmt 1.3.6.1.4.1.2011.5.25.42
       hwL2IfMib 1.3.6.1.4.1.2011.5.25.42.1
information of layer2 interface and information of hybrid port and information of trunk port
           hwL2IfObjects 1.3.6.1.4.1.2011.5.25.42.1.1
               hwL2Interface 1.3.6.1.4.1.2011.5.25.42.1.1.1
                   hwL2IfPortMax 1.3.6.1.4.1.2011.5.25.42.1.1.1.1 integer32 read-only
Max ports that this device supports,BRIDGE-MIB have a resemble definition.
                   hwL2TopologyDetect 1.3.6.1.4.1.2011.5.25.42.1.1.1.2 enabledstatus read-write
Whether to enable layer2 topology detection.
                   hwL2IfTable 1.3.6.1.4.1.2011.5.25.42.1.1.1.3 no-access
This is a table of layer2 interface,so it displays some attribute of layer2 interface.
                       hwL2IfEntry 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1 no-access
Entries of extended Huawei private interface information table
                           hwL2IfPortNum 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.1 integer32 no-access
Number of layer2 interface port, a unique value, for each port.It is recommended that values are assigned contiguously starting from 1.
                           hwL2IfPortIfIndex 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.2 interfaceindex read-only
A unique value, greater than zero, for each interface or interface sub-layer in the managed system. The value is consistent with the ifIndex in ifTable of IF-MIB.
                           hwL2IfPortType 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.3 integer read-write
Layer2 interface Port type, it contains invalid(0), trunk(1), access(2), hybrid(3), fabric(4)and qinq(5).Do not support fabric(4) now.invalid(0),which we read only,can't modify. Enumeration: 'fabric': 4, 'hybrid': 3, 'invalid': 0, 'access': 2, 'qinq': 5, 'trunk': 1.
                           hwL2IfPVID 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.4 integer32 read-write
Layer2 interface Port VLAN ID
                           hwL2IfIsSrcMacFilter 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.5 truthvalue read-only
Whether to filter source MAC address. We don't support it now.
                           hwL2IfMacAddrLearnMode 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.6 integer read-only
Status indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning.SVL means shared VLAN learning. We only support iVL now. Enumeration: 'iVL': 1, 'sVL': 2.
                           hwL2IfMacAddressLearn 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.7 integer read-write
Status indicates if the interface is allowed to learn mac address, enable(1) can be setted, (enabled(1) means that the interface can learn mac address), otherwise disabled(2) can be setted. discard(3) means the interface will drop packets. Enumeration: 'disabled': 2, 'discard': 3, 'enabled': 1.
                           hwL2IfBcastRatio 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.8 integer32 read-write
Broadcast-suppression ratio. Default is 100% . 100% indicates that the broadcast isn't suppressed.
                           hwL2IfMcastRatio 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.9 integer32 read-write
Multicast-suppression ratio.Default is 100%, 100% indicates that the multicast isn't suppressed.
                           hwL2IfUcastRatio 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.10 integer32 read-write
Unicastsuppression ratio. Default is 100% , 100% indicates that the broadcast isn't suppressed.
                           hwL2IfOutBcastRatio 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.11 integer32 read-write
Outbound broadcast-suppression ratio. Default is 100% . 100% indicates that the broadcast isn't suppressed.
                           hwL2IfOutMcastRatio 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.12 integer32 read-write
Outbound multicast-suppression ratio.Default is 100%, 100% indicates that the multicast isn't suppressed.
                           hwL2IfOutUcastRatio 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.13 integer32 read-write
Outbound unicastsuppression ratio. Default is 100% , 100% indicates that the broadcast isn't suppressed.
                           hwL2IfDiscardBcast 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.14 enabledstatus read-write
The flag of droping the broadcast packets, 1:discard; 2:forward(default).
                           hwL2IfDiscardUnknownMcast 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.15 enabledstatus read-write
The flag of droping the unknown mutilcast packets, 1:discard; 2:forward(default).
                           hwL2IfDiscardUnknownUcast 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.16 enabledstatus read-write
The flag of droping the unknown unicast packets, 1:discard; 2:forward(default).
                           hwL2IfBpdu 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.17 enabledstatus read-write
Bpdu enable in port.
                           hwL2IfPortPriority 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.18 integer32 read-write
Port priority about interface.
                           hwL2IfPortName 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.19 octet string read-only
The interface name.
                           hwL2IfInInvalidVlanPkts 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.20 counter64 read-only
The number of invalid VLAN packets.
                           hwL2IfFlushEnable 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.21 enabledstatus read-write
The flush enable status of layer2 port.
                           hwL2IfFlushControlVlan 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.22 integer32 read-write
The control vlan of flush packet.
                           hwL2IfCurrentInBcastPercent 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.23 enabledstatus read-write
The flag of qinq port trust default priority, 1:enable; 2:disable(default).
                           hwL2IfCurrentOutBcastPercent 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.24 enabledstatus read-write
The flag of port offline status, 1:enable; 2:disable(default).
                           hwL2IfQinqVlanTransEnable 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.25 enabledstatus read-write
Enable QinQ VLAN translation, 1:enable; 2:disable(default).
                           hwL2IfQinqVlanTransMissDrop 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.26 integer read-write
Packets are dropped when a VLAN translation miss occurs, 1:noDrop(default); 2:drop. Enumeration: 'drop': 2, 'noDrop': 1.
                           hwL2IfIpSubnetVlanEnable 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.27 enabledstatus read-write
Enable VLAN assignment based on ip subnet, 1:enable(default); 2:disable.
                           hwL2IfMacVlanEnable 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.28 enabledstatus read-write
Mac Vlan enable, 1:enable; 2:disable(default)
                           hwL2IfPolicyVlanEnable 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.29 enabledstatus read-write
Policy Vlan enable, 1:enable; 2:disable(default)
                           hwL2IfVlanPrecedence 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.30 integer32 read-write
Determine the priorities for selecting VLAN (MAC-based, subnet-based VLANs), 0:MAC VLAN(default); 1:IPSUBNET VLAN.
                           hwL2IfIsolateGroupEnable 1.3.6.1.4.1.2011.5.25.42.1.1.1.3.1.31 enabledstatus read-write
The value enabled(1) indicates that the port is a member of the port-isolate group; disable(2) indicates that the port is not a member of the port-isolate group. The default value is disable(2).
                   hwL2IfHybridPortTable 1.3.6.1.4.1.2011.5.25.42.1.1.1.9 no-access
Hybrid-port configuration table
                       hwL2IfHybridPortEntry 1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1 no-access
Entry of Hybrid-port configuration table
                           hwL2IfHybridPortIndex 1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.1 integer32 no-access
Index of Hybrid-port
                           hwL2IfHybridTaggedVlanListLow 1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.2 vlanlist read-write
The lowest possible value of the tagged vlan list on the Hybrid-port.
                           hwL2IfHybridTaggedVlanListHigh 1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.3 vlanlist read-write
The highest possible value of the tagged vlan list on the Hybrid-port.
                           hwL2IfHybridUnTaggedVlanListLow 1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.4 vlanlist read-write
The lowest possible value of the untagged vlan list on the Hybrid-port.
                           hwL2IfHybridUnTaggedVlanListHigh 1.3.6.1.4.1.2011.5.25.42.1.1.1.9.1.5 vlanlist read-write
The highest possible value of the untagged vlan list on the Hybrid-port.
                   hwL2IfTrunkPortTable 1.3.6.1.4.1.2011.5.25.42.1.1.1.10 no-access
Trunk-port configuration table. Trunk-port is a logistic port.
                         hwL2IfTrunkPortEntry 1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1 no-access
Entry of Trunk-port configuration table
                             hwL2IfTrunkPortIndex 1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1.1 integer32 no-access
Index of Trunk-port
                             hwL2IfTrunkAllowPassVlanListLow 1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1.2 vlanlist read-write
The lowest possible value of the Vlan list that port Trunk allows to pass.
                             hwL2IfTrunkAllowPassVlanListHigh 1.3.6.1.4.1.2011.5.25.42.1.1.1.10.1.3 vlanlist read-write
The highest possible value of the Vlan list that port Trunk allows to pass.
                   hwL2IfPortIsolateTable 1.3.6.1.4.1.2011.5.25.42.1.1.1.11 no-access
Port isolate in the same Service-instance table. The Service-instance is used to communicate among different vlans.
                         hwL2IfPortIsolateEntry 1.3.6.1.4.1.2011.5.25.42.1.1.1.11.1 no-access
Entry of port isolate configuration table.
                             hwL2IfPortIsolatePortIndex 1.3.6.1.4.1.2011.5.25.42.1.1.1.11.1.1 integer32 no-access
The port index of L2 interface.
                             hwL2IfPortIsolateSIName 1.3.6.1.4.1.2011.5.25.42.1.1.1.11.1.2 octet string no-access
The name of Service-instance.The Service-instance(S.I.)is used to communicate among different vlans.
                             hwL2IfPortIsolateRowStatus 1.3.6.1.4.1.2011.5.25.42.1.1.1.11.1.3 rowstatus read-only
The RowStatus of hwL2IfPortIsolateTable.
                   hwL2IfSuppressionTable 1.3.6.1.4.1.2011.5.25.42.1.1.1.12 no-access
Port suppression configuration table
                         hwL2IfSuppressionEntry 1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1 no-access
Entry of port suppression configuration table
                             hwL2IfSuppressionPortIndex 1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.1 integer32 no-access
The port index of L2 interface.
                             hwL2IfSuppressionType 1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.2 integer no-access
Type of port suppression command, a unique value from 1 to 3: 1 means broadcast suppression; 2 means multicast suppression; 3 means unicast suppression. Enumeration: 'broadcast': 1, 'unicast': 3, 'multicast': 2.
                             hwL2IfSuppressionCir 1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.3 integer32 read-only
Committed Information Rate. Unit: kbps.
                             hwL2IfSuppressionCbs 1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.4 integer32 read-only
Committed Burst Size. Unit: byte
                             hwL2IfSuppressionRowStatus 1.3.6.1.4.1.2011.5.25.42.1.1.1.12.1.5 rowstatus read-only
The RowStatus of hwL2IfSuppressionTable .
                   hwL2IfVlanSuppressionTable 1.3.6.1.4.1.2011.5.25.42.1.1.1.13 no-access
Port and Vlan suppression configuration table
                         hwL2IfVlanSuppressionEntry 1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1 no-access
Entry of port and Vlan suppression configuration table
                             hwL2IfVlanSuppressionPortIndex 1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.1 integer32 no-access
The port index of L2 interface.
                             hwL2IfVlanSuppressionStartVlan 1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.2 integer32 no-access
The start vlan-id of port and vlan suppression.
                             hwL2IfVlanSuppressionEndVlan 1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.3 integer32 no-access
The end vlan-id of port and vlan suppression.
                             hwL2IfVlanSuppressionCir 1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.4 integer32 read-only
Committed Information Rate. Unit: kbps.
                             hwL2IfVlanSuppressionCbs 1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.5 integer32 read-only
Committed Burst Size. Unit: byte
                             hwL2IfVlanSuppressionRowStatus 1.3.6.1.4.1.2011.5.25.42.1.1.1.13.1.6 rowstatus read-only
The RowStatus of hwL2IfVlanSuppressionTable .
                   hwL2IfPortTcnTable 1.3.6.1.4.1.2011.5.25.42.1.1.1.14 no-access
Port TCN in the same Service-instance table. The Service-instance is used to configure TCN.
                         hwL2IfPortTcnEntry 1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1 no-access
Entry of port TCN configuration table.
                             hwL2IfTcnPortIndex 1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.1 integer32 no-access
The port index of L2 interface.
                             hwL2IfTcnStp 1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.2 enabledstatus read-write
Status indicates if the interface is allowed to notify stp TCN message , enable(1) can be setted, (enabled(1) means that the interface can notify TCN), otherwise disabled(2) can be setted.
                             hwL2IfTcnSmartLink 1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.3 enabledstatus read-write
Status indicates if the interface is allowed to notify SmartLink TCN message, enable(1) can be setted, (enabled(1) means that the interface can notify TCN), otherwise disabled(2) can be setted.
                             hwL2IfTcnVlanListLow 1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.4 octet string read-write
The lowest possible value of the vlan list on the Tcn-port.
                             hwL2IfTcnVlanListHigh 1.3.6.1.4.1.2011.5.25.42.1.1.1.14.1.5 octet string read-write
The highest possible value of the vlan list on the Tcn-port.
                   hwL2IfPortLoopDetectTable 1.3.6.1.4.1.2011.5.25.42.1.1.1.15 no-access
A table containing the port external loopback detection information for device. It can protect the port from external loopback.
                         hwL2IfPortLoopDetectEntry 1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1 no-access
Entries of the port external loopback detection table.
                             hwL2IfPortLoopDetectPort 1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.1 integer32 no-access
The port number which will be configured port external loopback detection.
                             hwL2IfPortLoopDetectEnabled 1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.2 enabledstatus read-write
When this object is set to 'enabled(1)' Port external loopback detection is enabled on this port else disabled.
                             hwL2IfPortLoopDetectInterval 1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.3 integer32 read-write
The detect period of port external loopback detection.
                             hwL2IfPortLoopDetectAction 1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.4 integer read-write
The port external loopback detection protect action of this entry. Enumeration: 'block': 2, 'shutdown': 1, 'trap': 3.
                             hwL2IfPortLoopDetectStatus 1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.5 integer read-only
The current status of port(block/shutdown/trap/normal). Enumeration: 'trap': 4, 'shutdown': 3, 'block': 2, 'normal': 1.
                             hwL2IfPortLoopDetectProtocol 1.3.6.1.4.1.2011.5.25.42.1.1.1.15.1.6 octet string read-write
The ethernet type of the detecting packet to port external loopback detection.
                   hwL2IfPortProtocolVlanDataTable 1.3.6.1.4.1.2011.5.25.42.1.1.1.16 no-access
The entry of protocol vlan by port.
                         hwL2IfPortProtocolVlanDataEntry 1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1 no-access
The entry of protocol vlan by port.
                             hwL2IfPortProtocolVlanDataPortIndex 1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1.1 integer32 no-access
The protocol vlan Index of port .
                             hwL2IfPortProtocolVlanDataVlan 1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1.2 integer32 read-only
VLAN ID.
                             hwL2IfPortProtocolVlanDataPri 1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1.3 integer32 read-only
VLAN PRI.
                             hwL2IfPortProtocolVlanDataRowStatus 1.3.6.1.4.1.2011.5.25.42.1.1.1.16.1.4 rowstatus read-only
Operation status.
                   hwL2IfPwSuppressionTable 1.3.6.1.4.1.2011.5.25.42.1.1.1.17 no-access
Pw suppression configuration table
                         hwL2IfPwSuppressionEntry 1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1 no-access
This object indicates the configuration table for PW-based unknown traffic suppression.
                             hwL2IfPwSuppressionVsiName 1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.1 octet string no-access
This object indicates the name of the VSI that is configured with PW-based unknown traffic suppression.
                             hwL2IfPwSuppressionPwName 1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.2 octet string no-access
This object indicates the name of the PW that is configured with PW-based unknown traffic suppression.
                             hwL2IfPwSuppressionType 1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.3 integer no-access
The value of this object identifies the type of PW-based unknown traffic suppression: 1: broadcast suppression 2: multicast suppression 3: unknown unicast suppression Enumeration: 'broadcast': 1, 'unicast': 3, 'multicast': 2.
                             hwL2IfPwSuppressionCir 1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.4 integer32 read-only
This object indicates the Committed Information Rate. Unit: kbit/s.
                             hwL2IfPwSuppressionCbs 1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.5 integer32 read-only
This object indicates the Committed Burst Size. Unit: byte.
                             hwL2IfPwSuppressionRowStatus 1.3.6.1.4.1.2011.5.25.42.1.1.1.17.1.50 rowstatus read-only
This object indicates the RowStatus of hwPwSuppressionTable.
                   hwL2IfLoopDetectInterval 1.3.6.1.4.1.2011.5.25.42.1.1.1.18 integer32 read-write
The detect period of system external loopback detection.
                   hwL2IfDynamicPortVlanTable 1.3.6.1.4.1.2011.5.25.42.1.1.1.19 no-access
Table for dynamic relationship of port-vlan.
                         hwL2IfDynamicPortVlanEntry 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1 no-access
Entry of dynamic port-vlan relationship table.
                             hwL2IfDynamicPortVlanPortIndex 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.1 integer32 no-access
Port index of switch-port.
                             hwL2IfDynamicPortVlanServiceType 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.2 integer no-access
Service type of dynamic port-vlan relationship table. Enumeration: 'dynAuthenVLAN': 5, 'elmi': 7, 'unAuthenUserVLAN': 4, 'gvrp': 2, 'configured': 1, 'macFlapping': 8, 'voiceVLAN': 3, 'loopDetection': 10, 'loopbackDetect': 9, 'hvrp': 6.
                             hwL2IfDynamicPortVlanPvid 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.3 vlanidornone read-only
The Dynamic PVID of port-vlan table.
                             hwL2IfDynamicPortVlanUntaggedVlanListLow 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.4 vlanlist read-only
The lowest possible value of the untagged vlan list of dynamic port-vlan table.
                             hwL2IfDynamicPortVlanUntaggedVlanListHigh 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.5 vlanlist read-only
The highest possible value of the untagged vlan list of Dynamic port-vlan table.
                             hwL2IfDynamicPortVlanTaggedVlanListLow 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.6 vlanlist read-only
The lowest possible value of the tagged vlan list of Dynamic port-vlan table.
                             hwL2IfDynamicPortVlanTaggedVlanListHigh 1.3.6.1.4.1.2011.5.25.42.1.1.1.19.1.7 vlanlist read-only
The highest possible value of the tagged vlan list of Dynamic port-vlan table.
               hwL2IfTraps 1.3.6.1.4.1.2011.5.25.42.1.1.2
                   hwL2IfInvalidVlanPacketAlarm 1.3.6.1.4.1.2011.5.25.42.1.1.2.1
Warning of receiving invalid VLAN packets in the interface.
                   hwInBcastRisingThreshold 1.3.6.1.4.1.2011.5.25.42.1.1.2.2
Port status changed because loopback detect.(Normal/Block/Shutdown/Trap)
           hwL2IfConformance 1.3.6.1.4.1.2011.5.25.42.1.2
               hwL2IfCompliances 1.3.6.1.4.1.2011.5.25.42.1.2.1
                   hwL2IfCompliance 1.3.6.1.4.1.2011.5.25.42.1.2.1.1
The compliance statement for entities implementing the Huawei layer two interface management MIB
               hwL2IfGroups 1.3.6.1.4.1.2011.5.25.42.1.2.2
                   hwL2IfMacAddrGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.1
A collection of objects indicate mac address learn of the interface.
                   hwL2IfBroadcastRatioGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.2
A collection of objects indicate broadcast-suppression ratio.
                   hwL2IfHybridTaggedVlanGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.3
A collection of objects indicate lowest/highest possible value of the tagged/untagged vlan list on the Hybrid-port.
                   hwL2IfTrunkAllowPassVlanListGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.4
A collection of objects indicate lowest/highed possible value of the allowed and passed vlan list on the Trunk-port.
                   hwL2IfPortGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.5
A collection of objects indicate index of layer2 port.
                   hwL2IfPVIDGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.6
A collection of objects indicate PVID of layer2 interface.
                   hwL2IfPortTypeGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.7
A collection of objects indicate VLAN type of layer2 interface.
                   hwL2IfPortMaxGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.8
A collection of objects indicate that the device supports maxmum of port .
                   hwL2IfPortExtGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.9
A collection of objects indicate that the device supports attribute of port .
                   hwL2IfPortIsolateGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.10
A collection of objects indicate that the device supports islation of port .
                   hwL2IfAlarmGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.11
A collection of objects indicate that the device supports alarm of port .
                   hwL2IfSuppressionGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.12
A collection of objects that L2IfSuppression.
                   hwL2IfVlanSuppressionGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.13
A collection of values indicate that 'Committed infomation rate'.
                   hwL2IfPortTcnGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.14
A collection of objects indicate that the device supports islation of port .
                   hwL2IfPortLoopDetectGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.15
A collection of objects indicate that the port external loopback detection.
                   hwL2IfPortProtocolVlanDataGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.16
The entry of protocol vlan by port.
                   hwL2IfPwSuppressionGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.17
A collection of objects in L2IfPwSuppression.
                   hwL2IfDynamicPortVlanTableGroup 1.3.6.1.4.1.2011.5.25.42.1.2.2.19
A collection of objects of dynamic relationship of port-vlan.