ZYXEL-SESCOMMON-MIB: View SNMP OID List / Download MIB

VENDOR: ZYXEL COMMUNICATIONS CORP.


 Home MIB: ZYXEL-SESCOMMON-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, ZYXEL-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sesLineStatusTable 1.3.6.1.4.1.890.1.5.5.1.1 no-access
This table contains the current status of SHDSL line. These managed objects are supported by ZyXEL SDSL access switches.
     sesLineStatusEntry 1.3.6.1.4.1.890.1.5.5.1.1.1 no-access
An zyxelLineStatusEntry containing the specific status for a particular SHDSL interface.
         sesLineUptime 1.3.6.1.4.1.890.1.5.5.1.1.1.1 timeticks read-only
The time duration since the connection between STU-C STU-R is last setup.
         sesLineLinkDown 1.3.6.1.4.1.890.1.5.5.1.1.1.2 counter read-only
The number of link down since the SAM-1008 was last restarted.
         sesLineNMdefect 1.3.6.1.4.1.890.1.5.5.1.1.1.3 counter read-only
Count of noise margin defects
         sesLineHECdefect 1.3.6.1.4.1.890.1.5.5.1.1.1.4 counter read-only
Count of HEC defects
         sesLineTxPackets 1.3.6.1.4.1.890.1.5.5.1.1.1.5 counter read-only
Count of line Tx packets
         sesLineRxPackets 1.3.6.1.4.1.890.1.5.5.1.1.1.6 counter read-only
Count of line Rx packets
         sesLineTxFrames 1.3.6.1.4.1.890.1.5.5.1.1.1.7 counter read-only
Count of line Tx frames
         sesLineRxFrames 1.3.6.1.4.1.890.1.5.5.1.1.1.8 counter read-only
Count of line Rx frames
         sesLineTxCells 1.3.6.1.4.1.890.1.5.5.1.1.1.9 counter read-only
Count of line Tx cells
         sesLineRxCells 1.3.6.1.4.1.890.1.5.5.1.1.1.10 counter read-only
Count of line Rx cells
 sesMaxNumOfProfiles 1.3.6.1.4.1.890.1.5.5.1.2 integer read-only
The maximum number of SHDSL profiles which the system supports.
 sesLineConfTable 1.3.6.1.4.1.890.1.5.5.1.3 no-access
This table includes common attributes describing the SHDSL line.
     sesLineConfEntry 1.3.6.1.4.1.890.1.5.5.1.3.1 no-access
An entry in sesLineConfTable.
         sesLineConfEncap 1.3.6.1.4.1.890.1.5.5.1.3.1.1 integer read-write
The encapsulation of the SHDSL line. Enumeration: 'llc': 1, 'vc': 2.
         sesLineConfVpi 1.3.6.1.4.1.890.1.5.5.1.3.1.2 integer read-write
The VPI of the SHDSL line.
         sesLineConfVci 1.3.6.1.4.1.890.1.5.5.1.3.1.3 integer read-write
The VCI of the SHDSL line.
 sesMaxNumOfPortBondings 1.3.6.1.4.1.890.1.5.5.1.4 integer read-only
The maximum number of port bondings which the system supports.
 sesPortBondingTable 1.3.6.1.4.1.890.1.5.5.1.5 no-access
This table includes the configuration of port bonding.
     sesPortBondingEntry 1.3.6.1.4.1.890.1.5.5.1.5.1 no-access
An entry in sesPortBondingTable.
         sesPortBondingName 1.3.6.1.4.1.890.1.5.5.1.5.1.1 displaystring no-access
This object is used by the port bonding table in order to identify a row of this table.
         sesPortBondingNumOfMembers 1.3.6.1.4.1.890.1.5.5.1.5.1.2 integer read-write
The number of members included in the bonding entry.
         sesPortBondingMemberList 1.3.6.1.4.1.890.1.5.5.1.5.1.3 octet string read-write
The member list is included in the bonding entry. Each member is identified by two octets. In the 2-wire mode, each member stands for a single port. In the 4-wire mode, each member stands for a 4-wire group. In the 8-wire mode, each member stands for a 8-wire group.
         sesPortBondingMode 1.3.6.1.4.1.890.1.5.5.1.5.1.4 integer read-write
The mode in which the bonding entry is. twoWireC mode stands for 2-wire plus stu-c, and so on. Enumeration: 'fourWireR': 4, 'twoWireR': 2, 'eightWireR': 6, 'fourWireC': 3, 'twoWireC': 1, 'eightWireC': 5.
         sesPortBondingRowStatus 1.3.6.1.4.1.890.1.5.5.1.5.1.5 rowstatus read-write
To delete an existing row in this table.
 sesNwireTable 1.3.6.1.4.1.890.1.5.5.1.6 no-access
This table includes N-wire configurations.
     sesNwireEntry 1.3.6.1.4.1.890.1.5.5.1.6.1 no-access
An entry in sesNwireTable.
         sesNwireGroupName 1.3.6.1.4.1.890.1.5.5.1.6.1.1 displaystring no-access
This object is used by the N-wire table in order to identify a row of this table.
         sesNwireGroupNumber 1.3.6.1.4.1.890.1.5.5.1.6.1.2 octet string read-write
The group number included in the N-wire entry. Each group is identified by two octets. In the 4-wire mode: Group1 stands for Port1 and Port2 Group2 stands for Port3 and Port4 Group3 stands for Port5 and Port6 Group4 stands for Port7 and Port8 In the 8-wire mode: Group1 stands for Port1, Port2, Port3 and Port4 Group2 stands for Port5, Port6, Port7 and Port8
         sesNwireMode 1.3.6.1.4.1.890.1.5.5.1.6.1.3 integer read-write
The mode in which the N-wire entry is. fourWireC mode stands for 4-wire plus stu-c, and so on. Enumeration: 'fourWireR': 2, 'fourWireC': 1, 'eightWireR': 4, 'eightWireC': 3.
         sesNwireRowStatus 1.3.6.1.4.1.890.1.5.5.1.6.1.4 rowstatus read-write
To delete an existing row in this table.