ZTE-AN-PPPOE-TEST-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)


 Home MIB: ZTE-AN-PPPOE-TEST-MIB
Download as:   
SNMPv2-CONF, IF-MIB, ZTE-AN-IF-MIB, SNMPv2-SMI, ZTE-AN-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zxAnPppoeTestMib 1.3.6.1.4.1.3902.1082.70.56
The MIB module for the management of PPPoE test.
       zxAnPppoeTestGlobalObjects 1.3.6.1.4.1.3902.1082.70.56.1
           zxAnPppoeTestCapabilities 1.3.6.1.4.1.3902.1082.70.56.1.1 bits read-only
The PPPoE test compatibility. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means not supporting zxAnPppoeTestIfUserVid in zxAnPppoeTestIfConfTable. bit 1: value 1 means supporting zxAnPppoeTestIfUserMacAddress in zxAnPppoeTestIfConfTable. NOTE: No recommended to display it in NMS. Bits: 'supportPppoeTestIfUserMacAddress': 1, 'notSupportPppoeTestIfUserVid': 0.
       zxAnPppoeTestObjects 1.3.6.1.4.1.3902.1082.70.56.2
           zxAnPppoeTestIfConfTable 1.3.6.1.4.1.3902.1082.70.56.2.2 no-access
PPPoE test interface configuration table.
               zxAnPppoeTestIfConfEntry 1.3.6.1.4.1.3902.1082.70.56.2.2.1 no-access
A zxAnPppoeTestIfConfTable entry.
                   zxAnPppoeTestIfUserVid 1.3.6.1.4.1.3902.1082.70.56.2.2.1.1 integer32 read-only
The user VLAN of the interface which will be used in the testing datagram. 0 means that test will use the PVID of interface. Non-zero value must be within the tagged VLAN list of interface. If the VLAN cannot be found in the tagged VLAN list of interface, test should fail.
                   zxAnPppoeTestIfPppUserName 1.3.6.1.4.1.3902.1082.70.56.2.2.1.2 displaystring read-only
User name for PPP authentication.
                   zxAnPppoeTestIfPppPassword 1.3.6.1.4.1.3902.1082.70.56.2.2.1.3 displaystring read-only
Password for PPP authentication.
                   zxAnPppoeTestIfAuthMode 1.3.6.1.4.1.3902.1082.70.56.2.2.1.4 integer read-only
The protocol for user authentication. Possible values are: auto(1) - Assigned automatically. pap(2) - Performing PAP authentication in PPPoE test. chap(3) - Performing CHAP authentication in PPPoE test. Enumeration: 'pap': 2, 'auto': 1, 'chap': 3.
                   zxAnPppoeTestIfTimeout 1.3.6.1.4.1.3902.1082.70.56.2.2.1.5 integer32 read-only
The PPPoE test timeout value, in seconds. Value 0 means no timeout.
                   zxAnPppoeTestIfUserMacAddress 1.3.6.1.4.1.3902.1082.70.56.2.2.1.6 macaddress read-only
The PPPoE test user MAC address.
                   zxAnIfPppoeTestIfRowStatus 1.3.6.1.4.1.3902.1082.70.56.2.2.1.50 rowstatus read-only
This object is used to create a new row or delete an existing row in this table. Only 'createAndGo' and 'destroy' need to be supported. If test is in progress, agent should reject the 'destroy' request from manager. 'createAndGo' means creating an entry. 'destroy' means deleting an entry.
           zxAnPppoeTestIfStatusTable 1.3.6.1.4.1.3902.1082.70.56.2.3 no-access
PPPoE test interface status table.
               zxAnPppoeTestIfStatusEntry 1.3.6.1.4.1.3902.1082.70.56.2.3.1 no-access
A zxAnPppoeTestIfStatusTable entry.
                   zxAnPppoeTestIfStatus 1.3.6.1.4.1.3902.1082.70.56.2.3.1.1 integer read-only
PPPoE test status. Agent need keep this parameter updated so that manager can get the latest status of test by polling. Possible values are: notStarted(1) - PPPoE test is not started. inProgress(2) - PPPoE test is in progress. success(3) - PPPoE test is completed successfully. failed(4) - PPPoE test failed. Enumeration: 'failed': 4, 'inProgress': 2, 'notStarted': 1, 'success': 3.
                   zxAnPppoeTestIfFailReason 1.3.6.1.4.1.3902.1082.70.56.2.3.1.2 integer read-only
Failed reason for PPPoE test. Possible values are: none(1) - No Error unknownError(2) - Unknown Error hardwareNotSupport(3) - Hardware Not Supported vlanNotFound(4) - VLAN Not Found padiTimeout(5) - PADI Request Timeout padrTimeout(6) - PADR Request Timeout lcpNegotiationFail(7) - LCP Negotiation Failed userAuthFail(8) - Incorrect User Name or Password ipNegotiationFail(9) - IP Negotiation Failed pppoeTestTimeout(10) - PPPoE Test Timeout Enumeration: 'none': 1, 'padrTimeout': 6, 'hardwareNotSupport': 3, 'lcpNegotiationFail': 7, 'userAuthFail': 8, 'pppoeTestTimeout': 10, 'ipNegotiationFail': 9, 'vlanNotFound': 4, 'unknownError': 2, 'padiTimeout': 5.
                   zxAnPppoeTestIfBasMac 1.3.6.1.4.1.3902.1082.70.56.2.3.1.3 macaddress read-only
MAC address of BAS.
                   zxAnPppoeTestIfRemotePeerIpType 1.3.6.1.4.1.3902.1082.70.56.2.3.1.4 inetaddresstype read-only
IP address type of the remote peer.
                   zxAnPppoeTestIfRemotePeerIpAddr 1.3.6.1.4.1.3902.1082.70.56.2.3.1.5 inetaddress read-only
IP address of the remote peer.
                   zxAnPppoeTestIfClientIpType 1.3.6.1.4.1.3902.1082.70.56.2.3.1.6 inetaddresstype read-only
Client IP address type.
                   zxAnPppoeTestIfClientIpAddr 1.3.6.1.4.1.3902.1082.70.56.2.3.1.7 inetaddress read-only
The IP address that is distributed by BAS.
                   zxAnPppoeTestIfPppoeSessionId 1.3.6.1.4.1.3902.1082.70.56.2.3.1.8 integer32 read-only
PPPoE session ID.
                   zxAnPppoeTestIfBasDelay 1.3.6.1.4.1.3902.1082.70.56.2.3.1.9 integer32 read-only
BAS delay. Value 0 means that the device is disconnected to BAS.