ZTE-AN-PON-PERF-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)


 Home MIB: ZTE-AN-PON-PERF-MIB
Download as:   
SNMPv2-CONF, IF-MIB, ZTE-AN-PON-BASE-MIB, SNMPv2-SMI, ZTE-AN-SMI, HC-PerfHist-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zxAnPonPerfMib 1.3.6.1.4.1.3902.1082.500.4
The MIB module for the management of PON performance.
     zxAnPonPerfObjects 1.3.6.1.4.1.3902.1082.500.4.2
         zxAnPonOltPerfObjects 1.3.6.1.4.1.3902.1082.500.4.2.1
             zxAnPonOltIfCurrPerfTable 1.3.6.1.4.1.3902.1082.500.4.2.1.2 no-access
PON interface statistics table. The 'IfType' of ifIndex supports 1(physical interface) and 5(PON channel).
                 zxAnPonOltIfCurrPerfEntry 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1 no-access
Entry of zxAnPonOltIfCurrPerfTable.
                     zxAnPonOltIfRxOctets 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.1 counter64 read-only
Received octets.
                     zxAnPonOltIfRxPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.2 counter64 read-only
Received packets.
                     zxAnPonOltIfRxOctetRate 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.3 gauge32 read-only
Received bytes per second.
                     zxAnPonOltIfRxPktRate 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.4 gauge32 read-only
Received packets per second.
                     zxAnPonOltIfRxOctetPeakRate 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.5 gauge32 read-only
Peak rate of received octets.
                     zxAnPonOltIfRxPktPeakRate 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.6 gauge32 read-only
Peak rate of received packets.
                     zxAnPonOltIfRxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.7 counter64 read-only
Received unicast packets.
                     zxAnPonOltIfRxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.8 counter64 read-only
Received non-unicast packets.
                     zxAnPonOltIfRxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.9 counter64 read-only
Received multicast packets.
                     zxAnPonOltIfRxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.10 counter64 read-only
Received broadcast packets.
                     zxAnPonOltIfRxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.11 counter64 read-only
Received discarded packets.
                     zxAnPonOltIfRxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.12 counter64 read-only
Received errored packets.
                     zxAnPonOltIfRxPdr 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.13 unsigned32 read-only
Received packets drop ratio, in 10^-9 granularity.
                     zxAnPonOltIfRxPer 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.14 unsigned32 read-only
Received packets error ratio, in 10^-9 granularity.
                     zxAnPonOltIfRxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.15 counter64 read-only
The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfRxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.16 counter64 read-only
The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfRxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.17 counter64 read-only
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfRxPkts64Octets 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.18 counter64 read-only
The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOltIfRxPkts65To127Octets 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.19 counter64 read-only
The total number of packets (including bad packets) received that were between 65 and 127 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOltIfRxPkts128To255Octets 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.20 counter64 read-only
The total number of packets (including bad packets) received that were between 128 and 255 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOltIfRxPkts256To511Octets 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.21 counter64 read-only
The total number of packets (including bad packets) received that were between 256 and 511 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOltIfRxPkts512To1023Oct 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.22 counter64 read-only
The total number of packets (including bad packets) received that were between 512 and 1023 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOltIfRxPkts1024To1518Oct 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.23 counter64 read-only
The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOltIfRxBwUtilization 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.24 unsigned32 read-only
Received bandwidth throughput.
                     zxAnPonOltIfRxAvgBwUtilization 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.25 unsigned32 read-only
Received average bandwidth utilization.
                     zxAnPonOltIfRxFragments 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.26 counter64 read-only
The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for zxAnPonOltIfRxFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
                     zxAnPonOltIfRxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.27 counter64 read-only
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
                     zxAnPonOltIfRxAvgOctetRate 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.28 gauge32 read-only
Received average octet rate.
                     zxAnPonOltIfTxOctets 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.44 counter64 read-only
Transmitted octets.
                     zxAnPonOltIfTxPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.45 counter64 read-only
Transmitted packets.
                     zxAnPonOltIfTxOctetRate 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.46 gauge32 read-only
Transmitted rate of octets.
                     zxAnPonOltIfTxPktRate 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.47 gauge32 read-only
Transmitted rate of packets.
                     zxAnPonOltIfTxOctetPeakRate 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.48 gauge32 read-only
Transmitted peak rate of octets.
                     zxAnPonOltIfTxPktPeakRate 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.49 gauge32 read-only
Transmitted peak rate of packets.
                     zxAnPonOltIfTxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.50 counter64 read-only
Transmitted unicast packets.
                     zxAnPonOltIfTxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.51 counter64 read-only
Transmitted non-unicast packets.
                     zxAnPonOltIfTxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.52 counter64 read-only
Transmitted multicast packets.
                     zxAnPonOltIfTxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.53 counter64 read-only
Transmitted broadcast packets.
                     zxAnPonOltIfTxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.54 counter64 read-only
Transmitted discarded packets.
                     zxAnPonOltIfTxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.55 counter64 read-only
Transmitted error packets.
                     zxAnPonOltIfTxPdr 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.56 unsigned32 read-only
Transmitted packets drop ratio, in 10^-9 granularity.
                     zxAnPonOltIfTxPer 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.57 unsigned32 read-only
Transmitted packets error ratio, in 10^-9 granularity.
                     zxAnPonOltIfTxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.58 counter64 read-only
The total number of packets sent that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfTxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.59 counter64 read-only
The total number of packets sent that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfTxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.60 counter64 read-only
The total number of packets sent that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfTxPkts64Octets 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.61 counter64 read-only
The total number of packets (including bad packets) transmitted that were 64 octets in length excluding framing bits but including FCS octets).
                     zxAnPonOltIfTxPkts65To127Octets 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.62 counter64 read-only
The total number of packets transmitted that were between 65 and 127 octets in length.
                     zxAnPonOltIfTxPkts128To255Octets 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.63 counter64 read-only
The total number of packets transmitted that were between 128 and 255 octets in length.
                     zxAnPonOltIfTxPkts256To511Octets 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.64 counter64 read-only
The total number of packets transmitted that were between 256 and 511 octets in length.
                     zxAnPonOltIfTxPkts512To1023Oct 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.65 counter64 read-only
The total number of packets transmitted that were between 512 and 1023 octets in length.
                     zxAnPonOltIfTxPkts1024To1518Oct 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.66 counter64 read-only
The total number of packets transmitted that were between 1024 and 1518 octets in length.
                     zxAnPonOltIfTxBwUtilization 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.67 unsigned32 read-only
Transmitted bandwidth throughput.
                     zxAnPonOltIfTxAvgBwUtilization 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.68 unsigned32 read-only
Transmitted average bandwidth utilization.
                     zxAnPonOltIfTxFragments 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.69 counter64 read-only
The total number of packets sent that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for zxAnPonOltIfRxFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
                     zxAnPonOltIfTxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.70 counter64 read-only
The total number of packets sent that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
                     zxAnPonOltIfRxCorrFecCodes 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.71 counter64 read-only
The correct FEC codes received.
                     zxAnPonOltIfRxErrFecCodes 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.72 counter64 read-only
The errored FEC codes received.
                     zxAnPonOltIfCollisions 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.88 counter64 read-only
The best estimate of the total number of collisions on this olt interface.
                     zxAnPonOltIfDropEvents 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.89 counter64 read-only
The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
                     zxAnPonOltIfTxAvgOctetRate 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.90 gauge32 read-only
Transmitted average octet rate.
                     zxAnPonOltIfCurrPerfCapability 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.99 bits read-only
The support capability of PON OLT current performance statistics, each bit from left to right represents the support of performance statistic from top to bottom in this MIB table, value 1 represents support and value 0 is not support. Bits: 'zxAnPonOltIfRxErrPkts': 11, 'zxAnPonOltIfRxNUcastPkts': 7, 'zxAnPonOltIfTxPkts1024To1518Oct': 49, 'zxAnPonOltIfRxPdr': 12, 'zxAnPonOltIfRxPkts1024To1518Oct': 22, 'zxAnPonOltIfTxBcastPkts': 36, 'zxAnPonOltIfRxBwUtilization': 23, 'zxAnPonOltIfRxDiscardPkts': 10, 'zxAnPonOltIfTxUcastPkts': 33, 'zxAnPonOltIfCollisions': 54, 'zxAnPonOltIfRxAvgOctetRate': 58, 'zxAnPonOltIfRxCrcAlignErrors': 14, 'zxAnPonOltIfRxBcastPkts': 9, 'zxAnPonOltIfTxDiscardPkts': 37, 'zxAnPonOltIfTxPdr': 39, 'zxAnPonOltIfTxPkts128To255Octets': 46, 'zxAnPonOltIfRxPkts256To511Octets': 20, 'zxAnPonOltIfRxJabbers': 26, 'zxAnPonOltIfTxMcastPkts': 35, 'zxAnPonOltIfTxPer': 40, 'zxAnPonOltIfTxCrcAlignErrors': 41, 'zxAnPonOltIfTxAvgBwUtilization': 51, 'zxAnPonOltIfTxPkts65To127Octets': 45, 'zxAnPonOltIfRxUndersizePkts': 15, 'zxAnPonOltIfTxPkts512To1023Oct': 48, 'zxAnPonOltIfRxPktPeakRate': 5, 'zxAnPonOltIfRxPkts64Octets': 17, 'zxAnPonOltIfTxErrPkts': 38, 'zxAnPonOltIfRxFragments': 25, 'zxAnPonOltIfTxOctetPeakRate': 31, 'zxAnPonOltIfRxPkts': 1, 'zxAnPonOltIfTxFragments': 52, 'zxAnPonOltIfRxOctets': 0, 'zxAnPonOltIfTxPktPeakRate': 32, 'zxAnPonOltIfRxPer': 13, 'zxAnPonOltIfTxAvgOctetRate': 59, 'zxAnPonOltIfRxOctetRate': 2, 'zxAnPonOltIfRxOctetPeakRate': 4, 'zxAnPonOltIfTxPkts64Octets': 44, 'zxAnPonOltIfRxMcastPkts': 8, 'zxAnPonOltIfRxPktRate': 3, 'zxAnPonOltIfRxOversizePkts': 16, 'zxAnPonOltIfRxAvgBwUtilization': 24, 'zxAnPonOltIfRxUcastPkts': 6, 'zxAnPonOltIfTxNUcastPkts': 34, 'zxAnPonOltIfTxJabbers': 53, 'zxAnPonOltIfRxPkts128To255Octets': 19, 'zxAnPonOltIfTxOctets': 27, 'zxAnPonOltIfTxPkts256To511Octets': 47, 'zxAnPonOltIfTxBwUtilization': 50, 'zxAnPonOltIfTxOversizePkts': 43, 'zxAnPonOltIfRxPkts512To1023Oct': 21, 'zxAnPonOltIfDropEvents': 55, 'zxAnPonOltIfTxUndersizePkts': 42, 'zxAnPonOltIfTxOctetRate': 29, 'zxAnPonOltIfTxPkts': 28, 'zxAnPonOltIfRxPkts65To127Octets': 18, 'zxAnPonOltIfTxPktRate': 30, 'zxAnPonOltIfRxCorrFecCodes': 56, 'zxAnPonOltIfRxErrFecCodes': 57.
                     zxAnPonOltIfCurrPerfReset 1.3.6.1.4.1.3902.1082.500.4.2.1.2.1.100 integer read-write
Clear OLT current statistics,read invalid. When get this variable, always return 1. Enumeration: 'reset': 1.
             zxAnPonOltIfCurr15MinPerfTable 1.3.6.1.4.1.3902.1082.500.4.2.1.3 no-access
The current 15 minutes performance data table of PON interface. The 'IfType' of ifIndex supports 1(physical interface) and 5(PON channel).
                 zxAnPonOltIfCurr15MinPerfEntry 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1 no-access
Entry of zxAnPonOltIfCurr15MinPerfTable.
                     zxAnPonOltIfC15MTimeElapsed 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.1 gauge32 read-only
Number of seconds that have elapsed since the beginning of the current 15 minutes interval.
                     zxAnPonOltIfC15MRxOctets 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.2 counter64 read-only
The current 15 minutes interval octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC15MRxPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.3 counter64 read-only
The current 15 minutes interval packets (including bad packets, broadcast packets, and multicast packets) received.
                     zxAnPonOltIfC15MRxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.4 counter64 read-only
The current 15 minutes interval good packets received that were directed to a unicast address.
                     zxAnPonOltIfC15MRxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.5 counter64 read-only
The current 15 minutes interval good packets received that were directed to a non-unicast address.
                     zxAnPonOltIfC15MRxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.6 counter64 read-only
The current 15 minutes interval good packets received that were directed to a multicast address.
                     zxAnPonOltIfC15MRxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.7 counter64 read-only
The current 15 minutes interval good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOltIfC15MRxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.8 counter64 read-only
The current 15 minutes interval discarded packets received.
                     zxAnPonOltIfC15MRxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.9 counter64 read-only
The current 15 minutes interval error packets received.
                     zxAnPonOltIfC15MRxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.10 counter64 read-only
The current 15 minutes interval packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfC15MRxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.11 counter64 read-only
The current 15 minutes interval packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfC15MRxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.12 counter64 read-only
The current 15 minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfC15MRx64Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.13 counter64 read-only
The current 15 minutes interval packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC15MRx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.14 counter64 read-only
The current 15 minutes interval packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC15MRx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.15 counter64 read-only
The current 15 minutes interval packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC15MRx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.16 counter64 read-only
The current 15 minutes interval packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC15MRx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.17 counter64 read-only
The current 15 minutes interval packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC15MRx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.18 counter64 read-only
The current 15 minutes interval packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC15MRxFragments 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.19 counter64 read-only
The current 15 minutes interval packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfC15MRxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.20 counter64 read-only
The current 15 minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfC15MTxOctets 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.36 counter64 read-only
The current 15 minutes interval octets of data (including those in bad packets) sent on the network (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC15MTxPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.37 counter64 read-only
The current 15 minutes interval packets (including bad packets, broadcast packets, and multicast packets) transmitted.
                     zxAnPonOltIfC15MTxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.38 counter64 read-only
The current 15 minutes interval good packets transmitted that were directed to a unicast address.
                     zxAnPonOltIfC15MTxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.39 counter64 read-only
The current 15 minutes interval good packets transmitted that were directed to a non-unicast address.
                     zxAnPonOltIfC15MTxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.40 counter64 read-only
The current 15 minutes interval good packets transmitted that were directed to a multicast address.
                     zxAnPonOltIfC15MTxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.41 counter64 read-only
The current 15 minutes interval good packets transmitted that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOltIfC15MTxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.42 counter64 read-only
The current 15 minutes interval discarded packets transmitted.
                     zxAnPonOltIfC15MTxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.43 counter64 read-only
The current 15 minutes interval error packets transmitted.
                     zxAnPonOltIfC15MTxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.44 counter64 read-only
The current 15 minutes interval packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfC15MTxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.45 counter64 read-only
The current 15 minutes interval packets transmitted that were less than 64 octets long (excluding framing bits,but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfC15MTxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.46 counter64 read-only
The current 15 minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfC15MTxPkts64Octets 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.47 counter64 read-only
The current 15 minutes interval packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC15MTx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.48 counter64 read-only
The current 15 minutes interval packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC15MTx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.49 counter64 read-only
The current 15 minutes interval packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC15MTx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.50 counter64 read-only
The current 15 minutes interval packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC15MTx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.51 counter64 read-only
The current 15 minutes interval packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC15MTx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.52 counter64 read-only
The current 15 minutes interval packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC15MTxFragments 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.53 counter64 read-only
The current 15 minutes interval packets transmitted that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfC15MTxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.54 counter64 read-only
The current 15 minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfC15MRxCorrFecCodes 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.55 counter64 read-only
The current 15 minutes interval correct FEC codes received.
                     zxAnPonOltIfC15MRxErrFecCodes 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.56 counter64 read-only
The current 15 minutes interval errored FEC codes received.
                     zxAnPonOltIfC15MCollisions 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.70 counter64 read-only
The current 15 minutes interval best estimate of collisions on this olt interface.
                     zxAnPonOltIfC15MDropEvents 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.71 counter64 read-only
The current 15 minutes interval events in which packets were dropped by the probe due to lack of resources.
                     zxAnPonOltIfPerfCapability 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.99 bits read-only
The support capability of PON OLT interface C15M, CMin, C1D, H15M, HMin and H1D performance statistics, each bit from left to right represents the support of performance statistic from top to bottom in this MIB table, value 1 represents support and value 0 is not support. Bits: 'zxAnPonOltIfC15MTxUndersizePkts': 28, 'zxAnPonOltIfC15MRxUndersizePkts': 9, 'zxAnPonOltIfC15MRxUcastPkts': 2, 'zxAnPonOltIfC15MRxFragments': 17, 'zxAnPonOltIfC15MRx128To255Octs': 13, 'zxAnPonOltIfC15MTxJabbers': 37, 'zxAnPonOltIfC15MRxOctets': 0, 'zxAnPonOltIfC15MTxErrPkts': 26, 'zxAnPonOltIfC15MTx1024To1518Octs': 35, 'zxAnPonOltIfC15MRxCorrFecCodes': 40, 'zxAnPonOltIfC15MRxCrcAlignErrors': 8, 'zxAnPonOltIfC15MRx64Octs': 11, 'zxAnPonOltIfC15MTxPkts': 20, 'zxAnPonOltIfC15MRx512To1023Octs': 15, 'zxAnPonOltIfC15MTxCrcAlignErrors': 27, 'zxAnPonOltIfC15MTxDiscardPkts': 25, 'zxAnPonOltIfC15MRxErrPkts': 7, 'zxAnPonOltIfC15MTxUcastPkts': 21, 'zxAnPonOltIfC15MCollisions': 38, 'zxAnPonOltIfC15MTx65To127Octs': 31, 'zxAnPonOltIfC15MRx1024To1518Octs': 16, 'zxAnPonOltIfC15MRxMcastPkts': 4, 'zxAnPonOltIfC15MDropEvents': 39, 'zxAnPonOltIfC15MTxOversizePkts': 29, 'zxAnPonOltIfC15MTxPkts64Octets': 30, 'zxAnPonOltIfC15MRxBcastPkts': 5, 'zxAnPonOltIfC15MTx512To1023Octs': 34, 'zxAnPonOltIfC15MRxErrFecCodes': 41, 'zxAnPonOltIfC15MTxFragments': 36, 'zxAnPonOltIfC15MRxJabbers': 18, 'zxAnPonOltIfC15MTxNUcastPkts': 22, 'zxAnPonOltIfC15MRxPkts': 1, 'zxAnPonOltIfC15MTxBcastPkts': 24, 'zxAnPonOltIfC15MTxMcastPkts': 23, 'zxAnPonOltIfC15MRxNUcastPkts': 3, 'zxAnPonOltIfC15MRxOversizePkts': 10, 'zxAnPonOltIfC15MRx256To511Octs': 14, 'zxAnPonOltIfC15MTxOctets': 19, 'zxAnPonOltIfC15MRxDiscardPkts': 6, 'zxAnPonOltIfC15MTx128To255Octs': 32, 'zxAnPonOltIfC15MRx65To127Octs': 12, 'zxAnPonOltIfC15MTx256To511Octs': 33.
                     zxAnPonOltIfC15MPerfReset 1.3.6.1.4.1.3902.1082.500.4.2.1.3.1.100 integer read-write
Clear all the current 15-minutes performance variables. When get this variable, always return 1. Enumeration: 'reset': 1.
             zxAnPonOltIfCurr1DayPerfTable 1.3.6.1.4.1.3902.1082.500.4.2.1.4 no-access
The current 1 day performance data table of PON interface. The 'IfType' of ifIndex supports 1(physical interface) and 5(PON channel).
                 zxAnPonOltIfCurr1DayPerfEntry 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1 no-access
Entry of zxAnPonOltIfCurr1DayPerfTable.
                     zxAnPonOltIfC1DTimeElapsed 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.1 gauge32 read-only
Number of seconds that have elapsed since the beginning of the current 1 day interval.
                     zxAnPonOltIfC1DRxOctets 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.2 counter64 read-only
The current 1 day interval octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC1DRxPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.3 counter64 read-only
The current 1 day interval packets (including bad packets, broadcast packets, and multicast packets) received.
                     zxAnPonOltIfC1DRxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.4 counter64 read-only
The current 1 day interval good packets received that were directed to a unicast address.
                     zxAnPonOltIfC1DRxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.5 counter64 read-only
The current 1 day interval good packets received that were directed to a non-unicast address.
                     zxAnPonOltIfC1DRxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.6 counter64 read-only
The current 1 day interval good packets received that were directed to a multicast address.
                     zxAnPonOltIfC1DRxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.7 counter64 read-only
The current 1 day interval good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOltIfC1DRxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.8 counter64 read-only
The current 1 day interval discarded packets received.
                     zxAnPonOltIfC1DRxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.9 counter64 read-only
The current 1 day interval error packets received.
                     zxAnPonOltIfC1DRxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.10 counter64 read-only
The current 1 day interval packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfC1DRxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.11 counter64 read-only
The current 1 day interval packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfC1DRxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.12 counter64 read-only
The current 1 day interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfC1DRx64Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.13 counter64 read-only
The current 1 day interval packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC1DRx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.14 counter64 read-only
The current 1 day interval packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC1DRx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.15 counter64 read-only
The current 1 day interval packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC1DRx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.16 counter64 read-only
The current 1 day interval packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC1DRx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.17 counter64 read-only
The current 1 day interval packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC1DRx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.18 counter64 read-only
The current 1 day interval packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC1DRxFragments 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.19 counter64 read-only
The current 1 day interval packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfC1DRxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.20 counter64 read-only
The current 1 day interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfC1DTxOctets 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.36 counter64 read-only
The current 1 day interval octets of data (including those in bad packets) sent on the network (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC1DTxPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.37 counter64 read-only
The current 1 day interval packets (including bad packets, broadcast packets, and multicast packets) transmitted.
                     zxAnPonOltIfC1DTxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.38 counter64 read-only
The current 1 day interval good packets transmitted that were directed to a unicast address.
                     zxAnPonOltIfC1DTxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.39 counter64 read-only
The current 1 day interval good packets transmitted that were directed to a non-unicast address.
                     zxAnPonOltIfC1DTxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.40 counter64 read-only
The current 1 day interval good packets transmitted that were directed to a multicast address.
                     zxAnPonOltIfC1DTxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.41 counter64 read-only
The current 1 day interval good packets transmitted that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOltIfC1DTxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.42 counter64 read-only
The current 1 day interval discarded packets transmitted.
                     zxAnPonOltIfC1DTxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.43 counter64 read-only
The current 1 day interval error packets transmitted.
                     zxAnPonOltIfC1DTxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.44 counter64 read-only
The current 1 day interval packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfC1DTxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.45 counter64 read-only
The current 1 day interval packets transmitted that were less than 64 octets long (excluding framing bits,but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfC1DTxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.46 counter64 read-only
The current 1 day interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfC1DTx64Octets 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.47 counter64 read-only
The current 1 day interval packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC1DTx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.48 counter64 read-only
The current 1 day interval packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC1DTx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.49 counter64 read-only
The current 1 day interval packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC1DTx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.50 counter64 read-only
The current 1 day interval packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC1DTx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.51 counter64 read-only
The current 1 day interval packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC1DTx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.52 counter64 read-only
The current 1 day interval packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfC1DTxFragments 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.53 counter64 read-only
The current 1 day interval packets transmitted that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfC1DTxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.54 counter64 read-only
The current 1 day interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfC1DRxCorrFecCodes 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.55 counter64 read-only
The current 1 day interval correct FEC codes received.
                     zxAnPonOltIfC1DRxErrFecCodes 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.56 counter64 read-only
The current 1 day interval errored FEC codes received.
                     zxAnPonOltIfC1DCollisions 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.70 counter64 read-only
The current 1 day interval best estimate of collisions on this olt interface.
                     zxAnPonOltIfC1DDropEvents 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.71 counter64 read-only
The current 1 day interval events in which packets were dropped by the probe due to lack of resources.
                     zxAnPonOltIfC1DPerfReset 1.3.6.1.4.1.3902.1082.500.4.2.1.4.1.100 integer read-write
Clear all the current 1 day performance variables. When get this variable, always return 1. Enumeration: 'reset': 1.
             zxAnPonOltIfHis15MinPerfTable 1.3.6.1.4.1.3902.1082.500.4.2.1.5 no-access
The 15 minutes interval performance data table of PON OLT. The 'IfType' of ifIndex supports 1(physical interface) and 5(PON channel).
                 zxAnPonOltIfHis15MinPerfEntry 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1 no-access
An entry in the OLT 15 minutes interval performance data table.
                     zxAnPonOltIfH15MIntervalNo 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.1 integer32 no-access
Performance Data Interval. Interval 1 is the the most recent previous interval; Interval 96 is 24 hours ago. Intervals from 2 to 96 are optional.
                     zxAnPonOltIfH15MValidData 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.2 truthvalue read-only
Performance data valid flag. true(1) means valid. false(2) means invalid and the performace data is useless.
                     zxAnPonOltIfH15MDateAndTime 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.3 dateandtime read-only
15min performace data interval create time.
                     zxAnPonOltIfH15MRxOctets 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.4 counter64 read-only
The 15 minutes interval octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH15MRxPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.5 counter64 read-only
The 15 minutes interval packets (including bad packets, broadcast packets, and multicast packets) received.
                     zxAnPonOltIfH15MRxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.6 counter64 read-only
The 15 minutes interval good packets received that were directed to a unicast address.
                     zxAnPonOltIfH15MRxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.7 counter64 read-only
The 15 minutes interval good packets received that were directed to a non-unicast address.
                     zxAnPonOltIfH15MRxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.8 counter64 read-only
The 15 minutes interval good packets received that were directed to a multicast address.
                     zxAnPonOltIfH15MRxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.9 counter64 read-only
The 15 minutes interval good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOltIfH15MRxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.10 counter64 read-only
The 15 minutes interval discarded packets received.
                     zxAnPonOltIfH15MRxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.11 counter64 read-only
The 15 minutes interval error packets received.
                     zxAnPonOltIfH15MRxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.12 counter64 read-only
The 15 minutes interval packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfH15MRxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.13 counter64 read-only
The 15 minutes interval packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfH15MRxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.14 counter64 read-only
The 15 minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfH15MRx64Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.15 counter64 read-only
The 15 minutes interval packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH15MRx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.16 counter64 read-only
The 15 minutes interval packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH15MRx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.17 counter64 read-only
The 15 minutes interval packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH15MRx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.18 counter64 read-only
The 15 minutes interval packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH15MRx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.19 counter64 read-only
The 15 minutes interval packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH15MRx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.20 counter64 read-only
The 15 minutes interval packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH15MRxFragments 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.21 counter64 read-only
The 15 minutes interval packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfH15MRxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.22 counter64 read-only
The 15 minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfH15MRxAvgOctetRate 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.23 gauge32 read-only
The 15 minutes interval received average octet rate.
                     zxAnPonOltIfH15MTxOctets 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.36 counter64 read-only
The 15 minutes interval octets of data (including those in bad packets) sent on the network (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH15MTxPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.37 counter64 read-only
The 15 minutes interval packets (including bad packets, broadcast packets, and multicast packets) transmitted.
                     zxAnPonOltIfH15MTxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.38 counter64 read-only
The 15 minutes interval good packets transmitted that were directed to a unicast address.
                     zxAnPonOltIfH15MTxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.39 counter64 read-only
The 15 minutes interval good packets transmitted that were directed to a non-unicast address.
                     zxAnPonOltIfH15MTxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.40 counter64 read-only
The 15 minutes interval good packets transmitted that were directed to a multicast address.
                     zxAnPonOltIfH15MTxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.41 counter64 read-only
The 15 minutes interval good packets transmitted that were directed to the broadcast address.Note that this does not include multicast packets.
                     zxAnPonOltIfH15MTxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.42 counter64 read-only
The 15 minutes interval discarded packets transmitted.
                     zxAnPonOltIfH15MTxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.43 counter64 read-only
The 15 minutes interval error packets transmitted.
                     zxAnPonOltIfH15MTxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.44 counter64 read-only
The 15 minutes interval packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfH15MTxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.45 counter64 read-only
The 15 minutes interval packets transmitted that were less than 64 octets long (excluding framing bits,but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfH15MTxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.46 counter64 read-only
The 15 minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfH15MTxPkts64Octets 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.47 counter64 read-only
The 15 minutes interval packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH15MTx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.48 counter64 read-only
The 15 minutes interval packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH15MTx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.49 counter64 read-only
The 15 minutes interval packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH15MTx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.50 counter64 read-only
The 15 minutes interval packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH15MTx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.51 counter64 read-only
The 15 minutes interval packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH15MTx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.52 counter64 read-only
The 15 minutes interval packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH15MTxFragments 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.53 counter64 read-only
The 15 minutes interval packets transmitted that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfH15MTxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.54 counter64 read-only
The 15 minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfH15MRxCorrFecCodes 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.55 counter64 read-only
The 15 minutes interval correct FEC codes received.
                     zxAnPonOltIfH15MRxErrFecCodes 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.56 counter64 read-only
The 15 minutes interval errored FEC codes received.
                     zxAnPonOltIfH15MCollisions 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.70 counter64 read-only
The 15 minutes interval best estimate of collisions on this olt interface.
                     zxAnPonOltIfH15MDropEvents 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.71 counter64 read-only
The 15 minutes interval events in which packets were dropped by the probe due to lack of resources.
                     zxAnPonOltIfH15MTxAvgOctetRate 1.3.6.1.4.1.3902.1082.500.4.2.1.5.1.72 gauge32 read-only
The 15 minutes interval transmitted average octet rate.
             zxAnPonOltIfHis1DayPerfTable 1.3.6.1.4.1.3902.1082.500.4.2.1.6 no-access
The 1 day interval performance data table of PON OLT. The 'IfType' of ifIndex supports 1(physical interface) and 5(PON channel).
                 zxAnPonOltIfHis1DayPerfEntry 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1 no-access
The 1 day interval performance data entry of interfaces.
                     zxAnPonOltIfH1DIntervalNo 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.1 integer32 no-access
Performance Data Interval 1 is the the most recent previous interval Interval 7 is 1 week ago. Intervals from 2 to 7 are optional.
                     zxAnPonOltIfH1DValidData 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.2 truthvalue read-only
Performance data valid flag. true(1) means valid. false(2) means invalid and the performace data is useless.
                     zxAnPonOltIfH1DDateAndTime 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.3 dateandtime read-only
1 day performace data interval create time.
                     zxAnPonOltIfH1DRxOctets 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.4 counter64 read-only
The 1 day interval octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH1DRxPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.5 counter64 read-only
The 1 day interval packets (including bad packets, broadcast packets, and multicast packets) received.
                     zxAnPonOltIfH1DRxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.6 counter64 read-only
The 1 day interval good packets received that were directed to a unicast address.
                     zxAnPonOltIfH1DRxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.7 counter64 read-only
The 1 day interval good packets received that were directed to a non-unicast address.
                     zxAnPonOltIfH1DRxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.8 counter64 read-only
The 1 day interval good packets received that were directed to a multicast address.
                     zxAnPonOltIfH1DRxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.9 counter64 read-only
The 1 day interval good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOltIfH1DRxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.10 counter64 read-only
The 1 day interval discarded packets received.
                     zxAnPonOltIfH1DRxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.11 counter64 read-only
The 1 day interval error packets received.
                     zxAnPonOltIfH1DRxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.12 counter64 read-only
The 1 day interval packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfH1DRxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.13 counter64 read-only
The 1 day interval packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfH1DRxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.14 counter64 read-only
The 1 day interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfH1DRx64Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.15 counter64 read-only
The 1 day interval packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH1DRx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.16 counter64 read-only
The 1 day interval packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH1DRx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.17 counter64 read-only
The 1 day interval packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH1DRx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.18 counter64 read-only
The 1 day interval packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH1DRx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.19 counter64 read-only
The 1 day interval packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH1DRx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.20 counter64 read-only
The 1 day interval packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH1DRxFragments 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.21 counter64 read-only
The 1 day interval packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfH1DRxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.22 counter64 read-only
The 1 day interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfH1DRxAvgOctetRate 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.23 gauge32 read-only
The 1 day interval received average octet rate.
                     zxAnPonOltIfH1DTxOctets 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.36 counter64 read-only
The 1 day interval octets of data (including those in bad packets) sent on the network (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH1DTxPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.37 counter64 read-only
The 1 day interval packets (including bad packets, broadcast packets, and multicast packets) transmitted.
                     zxAnPonOltIfH1DTxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.38 counter64 read-only
The 1 day interval good packets transmitted that were directed to a unicast address.
                     zxAnPonOltIfH1DTxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.39 counter64 read-only
The 1 day interval good packets transmitted that were directed to a non-unicast address.
                     zxAnPonOltIfH1DTxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.40 counter64 read-only
The 1 day interval good packets transmitted that were directed to a multicast address.
                     zxAnPonOltIfH1DTxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.41 counter64 read-only
The 1 day interval good packets transmitted that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOltIfH1DTxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.42 counter64 read-only
The 1 day interval discarded packets transmitted.
                     zxAnPonOltIfH1DTxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.43 counter64 read-only
The 1 day interval error packets transmitted.
                     zxAnPonOltIfH1DTxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.44 counter64 read-only
The 1 day interval packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfH1DTxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.45 counter64 read-only
The 1 day interval packets transmitted that were less than 64 octets long (excluding framing bits,but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfH1DTxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.46 counter64 read-only
The 1 day interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOltIfH1DTxPkts64Octets 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.47 counter64 read-only
The 1 day interval packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH1DTx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.48 counter64 read-only
The 1 day interval packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH1DTx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.49 counter64 read-only
The 1 day interval packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH1DTx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.50 counter64 read-only
The 1 day interval packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH1DTx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.51 counter64 read-only
The 1 day interval packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH1DTx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.52 counter64 read-only
The 1 day interval packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOltIfH1DTxFragments 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.53 counter64 read-only
The 1 day interval packets transmitted that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfH1DTxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.54 counter64 read-only
The 1 day interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOltIfH1DRxCorrFecCodes 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.55 counter64 read-only
The 1 day interval correct FEC codes received.
                     zxAnPonOltIfH1DRxErrFecCodes 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.56 counter64 read-only
The 1 day interval errored FEC codes received.
                     zxAnPonOltIfH1DCollisions 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.70 counter64 read-only
The 1 day interval best estimate of collisions on this olt interface.
                     zxAnPonOltIfH1DDropEvents 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.71 counter64 read-only
The 1 day interval events in which packets were dropped by the probe due to lack of resources.
                     zxAnPonOltIfH1DTxAvgOctetRate 1.3.6.1.4.1.3902.1082.500.4.2.1.6.1.72 gauge32 read-only
The 1 day interval transmitted average octet rate.
             zxAnPonOltPerfAlmPrfTable 1.3.6.1.4.1.3902.1082.500.4.2.1.7 no-access
The performance alarm threshold profile list table of interfaces.
                 zxAnPonOltPerfAlmPrfEntry 1.3.6.1.4.1.3902.1082.500.4.2.1.7.1 no-access
The performance alarm threshold profile applying entry of interfaces.
                     zxAnPonOltPerfAlmPrfName 1.3.6.1.4.1.3902.1082.500.4.2.1.7.1.1 displaystring no-access
The performance alarm threshold profile name.
                     zxAnPonOltPerfAlmPrfRowStatus 1.3.6.1.4.1.3902.1082.500.4.2.1.7.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
             zxAnPonOltPerfAlmPrfConfTable 1.3.6.1.4.1.3902.1082.500.4.2.1.8 no-access
The performance alarm threshold profile table of interfaces.
                 zxAnPonOltPerfAlmPrfConfEntry 1.3.6.1.4.1.3902.1082.500.4.2.1.8.1 no-access
An entry in zxAnPonOltPerfAlmPrfConfTable. When a manager wants to create or modify an OLT performance alarm threshold item,it must comply with the multi-variables usage rule that all the mib variables related to same fuction must be in one snmp set operation, the variables have only one type: mandatory. Mandatory variables must be in the one snmp set operation. To create an OLT performance alarm threshold item on different level, alarm threshold ,restore threshold and zxAnPonOltPerfAlmConfRowStatus should be in one snmp set operation. The alarm threshold and restore threshold variables in the one snmp set operationshould be on same level. Such as: zxAnPonOltPerfRiseAlmThresh and zxAnPonOltPerfRiseAlmClrThresh, zxAnPonOltPerfRiseWarnThresh and zxAnPonOltPerfRiseWarnClrThresh, zxAnPonOltPerfFallWarnThresh and zxAnPonOltPerfFallWarnClrThresh, zxAnPonOltPerfFallAlmThresh and zxAnPonOltPerfFallAlmClrThresh. To modify an OLT performance alarm threshold item on different level,alarm threshold and restore threshold should be also in the one snmp set operation regardless of modifying alarm or restore threshold value alone. The alarm threshold and restore threshold variables in the one snmp set operationshould be on same level. Such as: zxAnPonOltPerfRiseAlmThresh and zxAnPonOltPerfRiseAlmClrThresh, zxAnPonOltPerfRiseWarnThresh and zxAnPonOltPerfRiseWarnClrThresh, zxAnPonOltPerfFallWarnThresh and zxAnPonOltPerfFallWarnClrThresh, zxAnPonOltPerfFallAlmThresh and zxAnPonOltPerfFallAlmClrThresh. To remove an OLT performance alarm threshold item, only zxAnPonOltPerfAlmConfRowStatus should be set to destroy(6) while all levels of this ONU performance alarm threshold item will be removed.
                     zxAnPonOltPerfVariable 1.3.6.1.4.1.3902.1082.500.4.2.1.8.1.1 object identifier no-access
The object identifier of performance variables.
                     zxAnPonOltPerfRiseAlmThresh 1.3.6.1.4.1.3902.1082.500.4.2.1.8.1.2 hcperfcurrentcount read-only
The threshold for rising alarm.
                     zxAnPonOltPerfRiseAlmClrThresh 1.3.6.1.4.1.3902.1082.500.4.2.1.8.1.3 hcperfcurrentcount read-only
The threshold for rising alarm restore.
                     zxAnPonOltPerfRiseWarnThresh 1.3.6.1.4.1.3902.1082.500.4.2.1.8.1.4 hcperfcurrentcount read-only
The threshold for rising warning.
                     zxAnPonOltPerfRiseWarnClrThresh 1.3.6.1.4.1.3902.1082.500.4.2.1.8.1.5 hcperfcurrentcount read-only
The threshold for rising warning restore.
                     zxAnPonOltPerfFallWarnThresh 1.3.6.1.4.1.3902.1082.500.4.2.1.8.1.6 hcperfcurrentcount read-only
The threshold for falling warning.
                     zxAnPonOltPerfFallWarnClrThresh 1.3.6.1.4.1.3902.1082.500.4.2.1.8.1.7 hcperfcurrentcount read-only
The threshold for falling warning restore.
                     zxAnPonOltPerfFallAlmThresh 1.3.6.1.4.1.3902.1082.500.4.2.1.8.1.8 hcperfcurrentcount read-only
The threshold for falling alarm.
                     zxAnPonOltPerfFallAlmClrThresh 1.3.6.1.4.1.3902.1082.500.4.2.1.8.1.9 hcperfcurrentcount read-only
The threshold for falling alarm restore.
                     zxAnPonOltPerfThreshUsed 1.3.6.1.4.1.3902.1082.500.4.2.1.8.1.10 bits read-only
The threshold used flag for falling alarm restore. Bits: 'fallWarnThresh': 4, 'fallAlmClrThresh': 7, 'fallWarnClrThresh': 5, 'riseAlmClrThresh': 1, 'riseWarnThresh': 2, 'fallAlmThresh': 6, 'riseWarnClrThresh': 3, 'riseAlmThresh': 0.
                     zxAnPonOltPerfAlmConfRowStatus 1.3.6.1.4.1.3902.1082.500.4.2.1.8.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
             zxAnPonOltPerfAlmPrfApplyTable 1.3.6.1.4.1.3902.1082.500.4.2.1.9 no-access
The performance alarm threshold profile applying table of interfaces. The 'IfType' of ifIndex supports 1(physical interface) and 5(PON channel).
                 zxAnPonOltPerfAlmPrfApplyEntry 1.3.6.1.4.1.3902.1082.500.4.2.1.9.1 no-access
An entry in zxAnPonOltPerfAlmPrfApplyTable. When a manager wants to apply an OLT performance alarm profile to specificed OLT interface,it must comply with the multi-variables usage rule that all the mib variables related to same fuction must be in one snmp set operation, the variables have only one type: mandatory. Mandatory variables must be in the one snmp set operation. To apply an OLT performance alarm profile to specificed OLT interface, 'zxAnPonOltPerfAlmPrf' and 'zxAnPonOltAlmPrfApplyRowStatus' should be in the one snmp set operation. To remove the application of an OLT performance alarm profile to the specificed OLT interface, only 'zxAnPonOltAlmPrfApplyRowStatus' should be set to destroy(6).
                     zxAnPonOltPerfAlmPrf 1.3.6.1.4.1.3902.1082.500.4.2.1.9.1.1 displaystring read-only
The performance alarm threshold profile.
                     zxAnPonOltAlmPrfApplyRowStatus 1.3.6.1.4.1.3902.1082.500.4.2.1.9.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
             zxAnPonOltIfCurrMinPerfTable 1.3.6.1.4.1.3902.1082.500.4.2.1.10 no-access
The minutes interval performance data table of PON OLT. The 'IfType' of ifIndex supports 1(physical interface) and 5(PON channel).
                   zxAnPonOltIfCurrMinPerfEntry 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1 no-access
An entry in the OLT minutes interval performance data table.
                       zxAnPonOltIfCMinTimeElapsed 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.1 hcperftimeelapsed read-only
Number of seconds that have elapsed since the beginning of the current minutes interval.
                       zxAnPonOltIfCMinRxOctets 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.2 counter64 read-only
The current minutes interval octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
                       zxAnPonOltIfCMinRxPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.3 counter64 read-only
The current minutes interval packets (including bad packets, broadcast packets, and multicast packets) received.
                       zxAnPonOltIfCMinRxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.4 counter64 read-only
The current minutes interval good packets received that were directed to a unicast address.
                       zxAnPonOltIfCMinRxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.5 counter64 read-only
The current minutes interval good packets received that were directed to a non-unicast address.
                       zxAnPonOltIfCMinRxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.6 counter64 read-only
The current minutes interval good packets received that were directed to a multicast address.
                       zxAnPonOltIfCMinRxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.7 counter64 read-only
The current minutes interval good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
                       zxAnPonOltIfCMinRxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.8 counter64 read-only
The current minutes interval discarded packets received.
                       zxAnPonOltIfCMinRxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.9 counter64 read-only
The current minutes interval error packets received.
                       zxAnPonOltIfCMinRxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.10 counter64 read-only
The current minutes interval packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOltIfCMinRxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.11 counter64 read-only
The current minutes interval packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       zxAnPonOltIfCMinRxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.12 counter64 read-only
The current minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       zxAnPonOltIfCMinRx64Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.13 counter64 read-only
The current minutes interval packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
                       zxAnPonOltIfCMinRx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.14 counter64 read-only
The current minutes interval packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfCMinRx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.15 counter64 read-only
The current minutes interval packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfCMinRx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.16 counter64 read-only
The current minutes interval packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfCMinRx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.17 counter64 read-only
The current minutes interval packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfCMinRx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.18 counter64 read-only
The current minutes interval packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfCMinRxFragments 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.19 counter64 read-only
The current minutes interval packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOltIfCMinRxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.20 counter64 read-only
The current minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOltIfCMinTxOctets 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.36 counter64 read-only
The current minutes interval octets of data (including those in bad packets) sent on the network (excluding framing bits but including FCS octets).
                       zxAnPonOltIfCMinTxPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.37 counter64 read-only
The current minutes interval packets (including bad packets, broadcast packets, and multicast packets) transmitted.
                       zxAnPonOltIfCMinTxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.38 counter64 read-only
The current minutes interval good packets transmitted that were directed to a unicast address.
                       zxAnPonOltIfCMinTxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.39 counter64 read-only
The current minutes interval good packets transmitted that were directed to a non-unicast address.
                       zxAnPonOltIfCMinTxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.40 counter64 read-only
The current minutes interval good packets transmitted that were directed to a multicast address.
                       zxAnPonOltIfCMinTxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.41 counter64 read-only
The current minutes interval good packets transmitted that were directed to the broadcast address. Note that this does not include multicast packets.
                       zxAnPonOltIfCMinTxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.42 counter64 read-only
The current minutes interval discarded packets transmitted.
                       zxAnPonOltIfCMinTxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.43 counter64 read-only
The current minutes interval error packets transmitted.
                       zxAnPonOltIfCMinTxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.44 counter64 read-only
The current minutes interval packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOltIfCMinTxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.45 counter64 read-only
The current minutes interval packets transmitted that were less than 64 octets long (excluding framing bits,but including FCS octets) and were otherwise well formed.
                       zxAnPonOltIfCMinTxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.46 counter64 read-only
The current minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       zxAnPonOltIfCMinTxPkts64Octets 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.47 counter64 read-only
The current minutes interval packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
                       zxAnPonOltIfCMinTx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.48 counter64 read-only
The current minutes interval packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfCMinTx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.49 counter64 read-only
The current minutes interval packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfCMinTx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.50 counter64 read-only
The current minutes interval packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfCMinTx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.51 counter64 read-only
The current minutes interval packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfCMinTx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.52 counter64 read-only
The current minutes interval packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfCMinTxFragments 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.53 counter64 read-only
The current minutes interval packets transmitted that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOltIfCMinTxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.54 counter64 read-only
The current minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOltIfCMinRxCorrFecCodes 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.55 counter64 read-only
The current minutes interval correct FEC codes received.
                       zxAnPonOltIfCMinRxErrFecCodes 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.56 counter64 read-only
The current minutes interval errored FEC codes received.
                       zxAnPonOltIfCMinCollisions 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.70 counter64 read-only
The current minutes interval best estimate of collisions on this olt interface.
                       zxAnPonOltIfCMinDropEvents 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.71 counter64 read-only
The current minutes interval events in which packets were dropped by the probe due to lack of resources.
                       zxAnPonOltIfCMinPerfReset 1.3.6.1.4.1.3902.1082.500.4.2.1.10.1.100 integer read-write
Clear all the current minutes performance variables. When get this variable, always return 1. Enumeration: 'reset': 1.
             zxAnPonOltIfHisMinPerfTable 1.3.6.1.4.1.3902.1082.500.4.2.1.11 no-access
The minutes interval history performance data table of PON OLT. The 'IfType' of ifIndex supports 1(physical interface) and 5(PON channel).
                   zxAnPonOltIfHisMinPerfEntry 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1 no-access
An entry in the OLT minutes interval history performance data table.
                       zxAnPonOltIfHMinIntervalNo 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.1 integer32 no-access
Performance data interval number.
                       zxAnPonOltIfHMinValidData 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.2 truthvalue read-only
Performance data valid flag. true(1) means valid. false(2) means invalid and the performace data is useless.
                       zxAnPonOltIfHMinDateAndTime 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.3 dateandtime read-only
The minutes interval performance data generation time.
                       zxAnPonOltIfHMinRxOctets 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.4 counter64 read-only
The minutes interval octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
                       zxAnPonOltIfHMinRxPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.5 counter64 read-only
The minutes interval packets (including bad packets, broadcast packets, and multicast packets) received.
                       zxAnPonOltIfHMinRxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.6 counter64 read-only
The minutes interval good packets received that were directed to a unicast address.
                       zxAnPonOltIfHMinRxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.7 counter64 read-only
The minutes interval good packets received that were directed to a non-unicast address.
                       zxAnPonOltIfHMinRxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.8 counter64 read-only
The minutes interval good packets received that were directed to a multicast address.
                       zxAnPonOltIfHMinRxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.9 counter64 read-only
The minutes interval good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
                       zxAnPonOltIfHMinRxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.10 counter64 read-only
The minutes interval discarded packets received.
                       zxAnPonOltIfHMinRxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.11 counter64 read-only
The minutes interval error packets received.
                       zxAnPonOltIfHMinRxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.12 counter64 read-only
The minutes interval packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOltIfHMinRxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.13 counter64 read-only
The minutes interval packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       zxAnPonOltIfHMinRxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.14 counter64 read-only
The minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       zxAnPonOltIfHMinRx64Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.15 counter64 read-only
The minutes interval packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
                       zxAnPonOltIfHMinRx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.16 counter64 read-only
The minutes interval packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfHMinRx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.17 counter64 read-only
The minutes interval packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfHMinRx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.18 counter64 read-only
The minutes interval packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfHMinRx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.19 counter64 read-only
The minutes interval packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfHMinRx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.20 counter64 read-only
The minutes interval packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfHMinRxFragments 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.21 counter64 read-only
The minutes interval packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOltIfHMinRxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.22 counter64 read-only
The minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOltIfHMinRxAvgOctetRate 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.23 gauge32 read-only
The minutes interval received average octet rate.
                       zxAnPonOltIfHMinTxOctets 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.36 counter64 read-only
The minutes interval octets of data (including those in bad packets) sent on the network (excluding framing bits but including FCS octets).
                       zxAnPonOltIfHMinTxPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.37 counter64 read-only
The minutes interval packets (including bad packets, broadcast packets, and multicast packets) transmitted.
                       zxAnPonOltIfHMinTxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.38 counter64 read-only
The minutes interval good packets transmitted that were directed to a unicast address.
                       zxAnPonOltIfHMinTxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.39 counter64 read-only
The minutes interval good packets transmitted that were directed to a non-unicast address.
                       zxAnPonOltIfHMinTxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.40 counter64 read-only
The minutes interval good packets transmitted that were directed to a multicast address.
                       zxAnPonOltIfHMinTxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.41 counter64 read-only
The minutes interval good packets transmitted that were directed to the broadcast address.Note that this does not include multicast packets.
                       zxAnPonOltIfHMinTxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.42 counter64 read-only
The minutes interval discarded packets transmitted.
                       zxAnPonOltIfHMinTxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.43 counter64 read-only
The minutes interval error packets transmitted.
                       zxAnPonOltIfHMinTxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.44 counter64 read-only
The minutes interval packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOltIfHMinTxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.45 counter64 read-only
The minutes interval packets transmitted that were less than 64 octets long (excluding framing bits,but including FCS octets) and were otherwise well formed.
                       zxAnPonOltIfHMinTxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.46 counter64 read-only
The minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       zxAnPonOltIfHMinTxPkts64Octets 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.47 counter64 read-only
The minutes interval packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
                       zxAnPonOltIfHMinTx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.48 counter64 read-only
The minutes interval packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfHMinTx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.49 counter64 read-only
The minutes interval packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfHMinTx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.50 counter64 read-only
The minutes interval packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfHMinTx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.51 counter64 read-only
The minutes interval packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfHMinTx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.52 counter64 read-only
The minutes interval packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOltIfHMinTxFragments 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.53 counter64 read-only
The minutes interval packets transmitted that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOltIfHMinTxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.54 counter64 read-only
The minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOltIfHMinRxCorrFecCodes 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.55 counter64 read-only
The minutes interval correct FEC codes received.
                       zxAnPonOltIfHMinRxErrFecCodes 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.56 counter64 read-only
The minutes interval errored FEC codes received.
                       zxAnPonOltIfHMinCollisions 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.70 counter64 read-only
The minutes interval best estimate of collisions on this olt interface.
                       zxAnPonOltIfHMinDropEvents 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.71 counter64 read-only
The minutes interval events in which packets were dropped by the probe due to lack of resources.
                       zxAnPonOltIfHMinTxAvgOctetRate 1.3.6.1.4.1.3902.1082.500.4.2.1.11.1.72 gauge32 read-only
The minutes interval transmitted average octet rate.
         zxAnPonOnuPerfObjects 1.3.6.1.4.1.3902.1082.500.4.2.2
             zxAnPonOnuIfCurrPerfTable 1.3.6.1.4.1.3902.1082.500.4.2.2.2 no-access
PON ONU interface statistics table
                 zxAnPonOnuIfCurrPerfEntry 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1 no-access
Entry of zxAnPonOnuIfCurrPerfTable.
                     zxAnPonOnuIfRxOctets 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.1 counter64 read-only
Received octets.
                     zxAnPonOnuIfRxPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.2 counter64 read-only
Received packets.
                     zxAnPonOnuIfRxOctetRate 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.3 gauge32 read-only
Received bytes per second.
                     zxAnPonOnuIfRxPktRate 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.4 gauge32 read-only
Received packets per second.
                     zxAnPonOnuIfRxOctetPeakRate 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.5 gauge32 read-only
Peak rate of received octets.
                     zxAnPonOnuIfRxPktPeakRate 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.6 gauge32 read-only
Peak rate of received packets.
                     zxAnPonOnuIfRxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.7 counter64 read-only
Received unicast packets.
                     zxAnPonOnuIfRxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.8 counter64 read-only
Received non-unicast packets.
                     zxAnPonOnuIfRxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.9 counter64 read-only
Received multicast packets.
                     zxAnPonOnuIfRxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.10 counter64 read-only
Received broadcast packets.
                     zxAnPonOnuIfRxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.11 counter64 read-only
Received discarded packets.
                     zxAnPonOnuIfRxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.12 counter64 read-only
Received errored packets.
                     zxAnPonOnuIfRxPdr 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.13 unsigned32 read-only
Received packets drop ratio, in 10^-9 granularity.
                     zxAnPonOnuIfRxPer 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.14 unsigned32 read-only
Received packets error ratio, in 10^-9 granularity.
                     zxAnPonOnuIfRxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.15 counter64 read-only
The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfRxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.16 counter64 read-only
The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfRxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.17 counter64 read-only
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfRxPkts64Octets 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.18 counter64 read-only
The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfRxPkts65To127Octets 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.19 counter64 read-only
The total number of packets (including bad packets) received that were between 65 and 127 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfRxPkts128To255Octets 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.20 counter64 read-only
The total number of packets (including bad packets) received that were between 128 and 255 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfRxPkts256To511Octets 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.21 counter64 read-only
The total number of packets (including bad packets) received that were between 256 and 511 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfRxPkts512To1023Oct 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.22 counter64 read-only
The total number of packets (including bad packets) received that were between 512 and 1023 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfRxPkts1024To1518Oct 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.23 counter64 read-only
The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfRxBwUtilization 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.24 unsigned32 read-only
Received bandwidth throughput.
                     zxAnPonOnuIfRxAvgBwUtilization 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.25 unsigned32 read-only
Received average bandwidth utilization.
                     zxAnPonOnuIfRxFragments 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.26 counter64 read-only
The total number of packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for zxAnPonOnuIfRxFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
                     zxAnPonOnuIfRxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.27 counter64 read-only
The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
                     zxAnPonOnuIfTxOctets 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.44 counter64 read-only
Transmitted octets.
                     zxAnPonOnuIfTxPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.45 counter64 read-only
Transmitted packets.
                     zxAnPonOnuIfTxOctetRate 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.46 gauge32 read-only
Transmitted rate of octets.
                     zxAnPonOnuIfTxPktRate 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.47 gauge32 read-only
Transmitted rate of packets.
                     zxAnPonOnuIfTxOctetPeakRate 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.48 gauge32 read-only
Transmitted peak rate of octets.
                     zxAnPonOnuIfTxPktPeakRate 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.49 gauge32 read-only
Transmitted peak rate of packets.
                     zxAnPonOnuIfTxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.50 counter64 read-only
Transmitted unicast packets.
                     zxAnPonOnuIfTxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.51 counter64 read-only
Transmitted non-unicast packets.
                     zxAnPonOnuIfTxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.52 counter64 read-only
Transmitted multicast packets.
                     zxAnPonOnuIfTxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.53 counter64 read-only
Transmitted broadcast packets.
                     zxAnPonOnuIfTxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.54 counter64 read-only
Transmitted discarded packets.
                     zxAnPonOnuIfTxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.55 counter64 read-only
Transmitted error packets.
                     zxAnPonOnuIfTxPdr 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.56 unsigned32 read-only
Transmitted packets drop ratio, in 10^-9 granularity.
                     zxAnPonOnuIfTxPer 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.57 unsigned32 read-only
Transmitted packets error ratio, in 10^-9 granularity.
                     zxAnPonOnuIfTxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.58 counter64 read-only
The total number of packets sent that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfTxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.59 counter64 read-only
The total number of packets sent that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfTxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.60 counter64 read-only
The total number of packets sent that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfTxPkts64Octets 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.61 counter64 read-only
The total number of packets (including bad packets) transmitted that were 64 octets in length excluding framing bits but including FCS octets).
                     zxAnPonOnuIfTxPkts65To127Octets 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.62 counter64 read-only
The total number of packets transmitted that were between 65 and 127 octets in length.
                     zxAnPonOnuIfTxPkts128To255Octets 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.63 counter64 read-only
The total number of packets transmitted that were between 128 and 255 octets in length.
                     zxAnPonOnuIfTxPkts256To511Octets 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.64 counter64 read-only
The total number of packets transmitted that were between 256 and 511 octets in length.
                     zxAnPonOnuIfTxPkts512To1023Oct 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.65 counter64 read-only
The total number of packets transmitted that were between 512 and 1023 octets in length.
                     zxAnPonOnuIfTxPkts1024To1518Oct 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.66 counter64 read-only
The total number of packets transmitted that were between 1024 and 1518 octets in length.
                     zxAnPonOnuIfTxBwUtilization 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.67 unsigned32 read-only
Transmitted bandwidth throughput.
                     zxAnPonOnuIfTxAvgBwUtilization 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.68 unsigned32 read-only
Transmitted average bandwidth utilization.
                     zxAnPonOnuIfTxFragments 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.69 counter64 read-only
The total number of packets sent that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that it is entirely normal for zxAnPonOnuIfRxFragments to increment. This is because it counts both runts (which are normal occurrences due to collisions) and noise hits.
                     zxAnPonOnuIfTxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.70 counter64 read-only
The total number of packets sent that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). Note that this definition of jabber is different than the definition in IEEE-802.3 section 8.2.1.5 (10BASE5) and section 10.3.1.4 (10BASE2). These documents define jabber as the condition where any packet exceeds 20 ms. The allowed range to detect jabber is between 20 ms and 150 ms.
                     zxAnPonOnuIfCollisions 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.88 counter64 read-only
The best estimate of the total number of collisions on this olt interface.
                     zxAnPonOnuIfDropEvents 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.89 counter64 read-only
The total number of events in which packets were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has been detected.
                     zxAnPonOnuIfCurrPerfCapability 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.99 bits read-only
The support capability of PON ONU current performance statistics, each bit from left to right represents the support of performance statistic from top to bottom in this MIB table, value 1 represents support and value 0 is not support. Bits: 'zxAnPonOnuIfRxOctetRate': 2, 'zxAnPonOnuIfTxPkts512To1023Oct': 48, 'zxAnPonOnuIfRxOversizePkts': 16, 'zxAnPonOnuIfTxPkts64Octets': 44, 'zxAnPonOnuIfRxMcastPkts': 8, 'zxAnPonOnuIfRxPkts256To511Octets': 20, 'zxAnPonOnuIfRxUndersizePkts': 15, 'zxAnPonOnuIfTxUcastPkts': 33, 'zxAnPonOnuIfRxPer': 13, 'zxAnPonOnuIfTxOctetRate': 29, 'zxAnPonOnuIfCollisions': 54, 'zxAnPonOnuIfRxPkts': 1, 'zxAnPonOnuIfRxFragments': 25, 'zxAnPonOnuIfRxDiscardPkts': 10, 'zxAnPonOnuIfTxPkts': 28, 'zxAnPonOnuIfRxJabbers': 26, 'zxAnPonOnuIfRxPkts512To1023Oct': 21, 'zxAnPonOnuIfRxBcastPkts': 9, 'zxAnPonOnuIfTxPkts256To511Octets': 47, 'zxAnPonOnuIfTxOversizePkts': 43, 'zxAnPonOnuIfTxPdr': 39, 'zxAnPonOnuIfRxErrPkts': 11, 'zxAnPonOnuIfTxMcastPkts': 35, 'zxAnPonOnuIfTxJabbers': 53, 'zxAnPonOnuIfRxBwUtilization': 23, 'zxAnPonOnuIfRxPdr': 12, 'zxAnPonOnuIfTxNUcastPkts': 34, 'zxAnPonOnuIfTxDiscardPkts': 37, 'zxAnPonOnuIfRxUcastPkts': 6, 'zxAnPonOnuIfTxUndersizePkts': 42, 'zxAnPonOnuIfRxAvgBwUtilization': 24, 'zxAnPonOnuIfRxPktRate': 3, 'zxAnPonOnuIfRxPkts128To255Octets': 19, 'zxAnPonOnuIfRxPkts65To127Octets': 18, 'zxAnPonOnuIfTxErrPkts': 38, 'zxAnPonOnuIfRxPkts64Octets': 17, 'zxAnPonOnuIfRxCrcAlignErrors': 14, 'zxAnPonOnuIfTxBwUtilization': 50, 'zxAnPonOnuIfRxPkts1024To1518Oct': 22, 'zxAnPonOnuIfRxOctetPeakRate': 4, 'zxAnPonOnuIfTxCrcAlignErrors': 41, 'zxAnPonOnuIfDropEvents': 55, 'zxAnPonOnuIfTxPktRate': 30, 'zxAnPonOnuIfTxAvgBwUtilization': 51, 'zxAnPonOnuIfTxPktPeakRate': 32, 'zxAnPonOnuIfTxPer': 40, 'zxAnPonOnuIfTxOctets': 27, 'zxAnPonOnuIfTxBcastPkts': 36, 'zxAnPonOnuIfRxNUcastPkts': 7, 'zxAnPonOnuIfRxPktPeakRate': 5, 'zxAnPonOnuIfRxOctets': 0, 'zxAnPonOnuIfTxPkts65To127Octets': 45, 'zxAnPonOnuIfTxPkts128To255Octets': 46, 'zxAnPonOnuIfTxOctetPeakRate': 31, 'zxAnPonOnuIfTxFragments': 52, 'zxAnPonOnuIfTxPkts1024To1518Oct': 49.
                     zxAnPonOnuIfCurrPerfReset 1.3.6.1.4.1.3902.1082.500.4.2.2.2.1.100 integer read-write
Clear ONU current statistics,read invalid. When get this variable, always return 1. Enumeration: 'reset': 1.
             zxAnPonOnuIfCurr15MinPerfTable 1.3.6.1.4.1.3902.1082.500.4.2.2.3 no-access
The current 15 minutes performance data table of PON ONU interface.
                 zxAnPonOnuIfCurr15MinPerfEntry 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1 no-access
Entry of zxAnPonOnuIfCurr15MinPerfTable.
                     zxAnPonOnuIfC15MTimeElapsed 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.1 gauge32 read-only
Number of seconds that have elapsed since the beginning of the current 15 minutes interval.
                     zxAnPonOnuIfC15MRxOctets 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.2 counter64 read-only
The current 15 minutes interval octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC15MRxPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.3 counter64 read-only
The current 15 minutes interval packets (including bad packets, broadcast packets, and multicast packets) received.
                     zxAnPonOnuIfC15MRxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.4 counter64 read-only
The current 15 minutes interval good packets received that were directed to a unicast address.
                     zxAnPonOnuIfC15MRxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.5 counter64 read-only
The current 15 minutes interval good packets received that were directed to a non-unicast address.
                     zxAnPonOnuIfC15MRxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.6 counter64 read-only
The current 15 minutes interval good packets received that were directed to a multicast address.
                     zxAnPonOnuIfC15MRxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.7 counter64 read-only
The current 15 minutes interval good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOnuIfC15MRxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.8 counter64 read-only
The current 15 minutes interval discarded packets received.
                     zxAnPonOnuIfC15MRxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.9 counter64 read-only
The current 15 minutes interval error packets received.
                     zxAnPonOnuIfC15MRxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.10 counter64 read-only
The current 15 minutes interval packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfC15MRxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.11 counter64 read-only
The current 15 minutes interval packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfC15MRxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.12 counter64 read-only
The current 15 minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfC15MRx64Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.13 counter64 read-only
The current 15 minutes interval packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC15MRx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.14 counter64 read-only
The current 15 minutes interval packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC15MRx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.15 counter64 read-only
The current 15 minutes interval packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC15MRx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.16 counter64 read-only
The current 15 minutes interval packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC15MRx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.17 counter64 read-only
The current 15 minutes interval packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC15MRx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.18 counter64 read-only
The current 15 minutes interval packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC15MRxFragments 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.19 counter64 read-only
The current 15 minutes interval packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfC15MRxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.20 counter64 read-only
The current 15 minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfC15MTxOctets 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.36 counter64 read-only
The current 15 minutes interval octets of data (including those in bad packets) sent on the network (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC15MTxPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.37 counter64 read-only
The current 15 minutes interval packets (including bad packets, broadcast packets, and multicast packets) transmitted.
                     zxAnPonOnuIfC15MTxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.38 counter64 read-only
The current 15 minutes interval good packets transmitted that were directed to a unicast address.
                     zxAnPonOnuIfC15MTxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.39 counter64 read-only
The current 15 minutes interval good packets transmitted that were directed to a non-unicast address.
                     zxAnPonOnuIfC15MTxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.40 counter64 read-only
The current 15 minutes interval good packets transmitted that were directed to a multicast address.
                     zxAnPonOnuIfC15MTxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.41 counter64 read-only
The current 15 minutes interval good packets transmitted that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOnuIfC15MTxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.42 counter64 read-only
The current 15 minutes interval discarded packets transmitted.
                     zxAnPonOnuIfC15MTxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.43 counter64 read-only
The current 15 minutes interval error packets transmitted.
                     zxAnPonOnuIfC15MTxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.44 counter64 read-only
The current 15 minutes interval packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfC15MTxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.45 counter64 read-only
The current 15 minutes interval packets transmitted that were less than 64 octets long (excluding framing bits,but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfC15MTxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.46 counter64 read-only
The current 15 minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfC15MTxPkts64Octets 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.47 counter64 read-only
The current 15 minutes interval packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC15MTx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.48 counter64 read-only
The current 15 minutes interval packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC15MTx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.49 counter64 read-only
The current 15 minutes interval packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC15MTx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.50 counter64 read-only
The current 15 minutes interval packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC15MTx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.51 counter64 read-only
The current 15 minutes interval packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC15MTx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.52 counter64 read-only
The current 15 minutes interval packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC15MTxFragments 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.53 counter64 read-only
The current 15 minutes interval packets transmitted that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfC15MTxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.54 counter64 read-only
The current 15 minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfC15MCollisions 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.70 counter64 read-only
The current 15 minutes interval best estimate of collisions on this onu interface.
                     zxAnPonOnuIfC15MDropEvents 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.71 counter64 read-only
The current 15 minutes interval events in which packets were dropped by the probe due to lack of resources.
                     zxAnPonOnuIfPerfCapability 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.99 bits read-only
The support capability of PON ONU interface C15M, CMin, C1D, H15M, HMin and H1D performance statistics, each bit from left to right represents the support of performance statistic from top to bottom in this MIB table, value 1 represents support and value 0 is not support. Bits: 'zxAnPonOnuIfC15MRx128To255Octs': 13, 'zxAnPonOnuIfC15MTxOversizePkts': 29, 'zxAnPonOnuIfC15MRxOctets': 0, 'zxAnPonOnuIfC15MRxOversizePkts': 10, 'zxAnPonOnuIfC15MRx512To1023Octs': 15, 'zxAnPonOnuIfC15MTx65To127Octs': 31, 'zxAnPonOnuIfC15MRxErrPkts': 7, 'zxAnPonOnuIfC15MDropEvents': 39, 'zxAnPonOnuIfC15MRxFragments': 17, 'zxAnPonOnuIfC15MTx1024To1518Octs': 35, 'zxAnPonOnuIfC15MTxOctets': 19, 'zxAnPonOnuIfC15MRxMcastPkts': 4, 'zxAnPonOnuIfC15MRx256To511Octs': 14, 'zxAnPonOnuIfC15MTxUcastPkts': 21, 'zxAnPonOnuIfC15MTxDiscardPkts': 25, 'zxAnPonOnuIfC15MTxPkts64Octets': 30, 'zxAnPonOnuIfC15MRxCrcAlignErrors': 8, 'zxAnPonOnuIfC15MTxCrcAlignErrors': 27, 'zxAnPonOnuIfC15MTx256To511Octs': 33, 'zxAnPonOnuIfC15MRx64Octs': 11, 'zxAnPonOnuIfC15MRxUcastPkts': 2, 'zxAnPonOnuIfC15MRx1024To1518Octs': 16, 'zxAnPonOnuIfC15MTxUndersizePkts': 28, 'zxAnPonOnuIfC15MTxBcastPkts': 24, 'zxAnPonOnuIfC15MTxJabbers': 37, 'zxAnPonOnuIfC15MTx512To1023Octs': 34, 'zxAnPonOnuIfC15MTx128To255Octs': 32, 'zxAnPonOnuIfC15MTxNUcastPkts': 22, 'zxAnPonOnuIfC15MTxErrPkts': 26, 'zxAnPonOnuIfC15MRxPkts': 1, 'zxAnPonOnuIfC15MTxFragments': 36, 'zxAnPonOnuIfC15MTxMcastPkts': 23, 'zxAnPonOnuIfC15MRxUndersizePkts': 9, 'zxAnPonOnuIfC15MRxDiscardPkts': 6, 'zxAnPonOnuIfC15MRxNUcastPkts': 3, 'zxAnPonOnuIfC15MRxBcastPkts': 5, 'zxAnPonOnuIfC15MCollisions': 38, 'zxAnPonOnuIfC15MTxPkts': 20, 'zxAnPonOnuIfC15MRxJabbers': 18, 'zxAnPonOnuIfC15MRx65To127Octs': 12.
                     zxAnPonOnuIfC15MPerfReset 1.3.6.1.4.1.3902.1082.500.4.2.2.3.1.100 integer read-write
Clear all the current 15-minutes performance variables. When get this variable, always return 1. Enumeration: 'reset': 1.
             zxAnPonOnuIfCurr1DayPerfTable 1.3.6.1.4.1.3902.1082.500.4.2.2.4 no-access
The current 1 day performance data table of PON ONU interface.
                 zxAnPonOnuIfCurr1DayPerfEntry 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1 no-access
Entry of zxAnPonOnuIfCurr1DayPerfTable.
                     zxAnPonOnuIfC1DTimeElapsed 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.1 gauge32 read-only
Number of seconds that have elapsed since the beginning of the current 1 day interval.
                     zxAnPonOnuIfC1DRxOctets 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.2 counter64 read-only
The current 1 day interval octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC1DRxPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.3 counter64 read-only
The current 1 day interval packets (including bad packets, broadcast packets, and multicast packets) received.
                     zxAnPonOnuIfC1DRxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.4 counter64 read-only
The current 1 day interval good packets received that were directed to a unicast address.
                     zxAnPonOnuIfC1DRxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.5 counter64 read-only
The current 1 day interval good packets received that were directed to a non-unicast address.
                     zxAnPonOnuIfC1DRxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.6 counter64 read-only
The current 1 day interval good packets received that were directed to a multicast address.
                     zxAnPonOnuIfC1DRxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.7 counter64 read-only
The current 1 day interval good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOnuIfC1DRxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.8 counter64 read-only
The current 1 day interval discarded packets received.
                     zxAnPonOnuIfC1DRxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.9 counter64 read-only
The current 1 day interval error packets received.
                     zxAnPonOnuIfC1DRxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.10 counter64 read-only
The current 1 day interval packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfC1DRxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.11 counter64 read-only
The current 1 day interval packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfC1DRxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.12 counter64 read-only
The current 1 day interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfC1DRx64Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.13 counter64 read-only
The current 1 day interval packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC1DRx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.14 counter64 read-only
The current 1 day interval packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC1DRx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.15 counter64 read-only
The current 1 day interval packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC1DRx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.16 counter64 read-only
The current 1 day interval packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC1DRx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.17 counter64 read-only
The current 1 day interval packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC1DRx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.18 counter64 read-only
The current 1 day interval packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC1DRxFragments 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.19 counter64 read-only
The current 1 day interval packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfC1DRxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.20 counter64 read-only
The current 1 day interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfC1DTxOctets 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.36 counter64 read-only
The current 1 day interval octets of data (including those in bad packets) sent on the network (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC1DTxPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.37 counter64 read-only
The current 1 day interval packets (including bad packets, broadcast packets, and multicast packets) transmitted.
                     zxAnPonOnuIfC1DTxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.38 counter64 read-only
The current 1 day interval good packets transmitted that were directed to a unicast address.
                     zxAnPonOnuIfC1DTxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.39 counter64 read-only
The current 1 day interval good packets transmitted that were directed to a non-unicast address.
                     zxAnPonOnuIfC1DTxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.40 counter64 read-only
The current 1 day interval good packets transmitted that were directed to a multicast address.
                     zxAnPonOnuIfC1DTxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.41 counter64 read-only
The current 1 day interval good packets transmitted that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOnuIfC1DTxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.42 counter64 read-only
The current 1 day interval discarded packets transmitted.
                     zxAnPonOnuIfC1DTxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.43 counter64 read-only
The current 1 day interval error packets transmitted.
                     zxAnPonOnuIfC1DTxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.44 counter64 read-only
The current 1 day interval packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfC1DTxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.45 counter64 read-only
The current 1 day interval packets transmitted that were less than 64 octets long (excluding framing bits,but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfC1DTxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.46 counter64 read-only
The current 1 day interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfC1DTx64Octets 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.47 counter64 read-only
The current 1 day interval packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC1DTx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.48 counter64 read-only
The current 1 day interval packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC1DTx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.49 counter64 read-only
The current 1 day interval packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC1DTx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.50 counter64 read-only
The current 1 day interval packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC1DTx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.51 counter64 read-only
The current 1 day interval packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC1DTx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.52 counter64 read-only
The current 1 day interval packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfC1DTxFragments 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.53 counter64 read-only
The current 1 day interval packets transmitted that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfC1DTxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.54 counter64 read-only
The current 1 day interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfC1DCollisions 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.70 counter64 read-only
The current 1 day interval best estimate of collisions on this onu interface.
                     zxAnPonOnuIfC1DDropEvents 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.71 counter64 read-only
The current 1 day interval events in which packets were dropped by the probe due to lack of resources.
                     zxAnPonOnuIfC1DPerfReset 1.3.6.1.4.1.3902.1082.500.4.2.2.4.1.100 integer read-write
Clear all the current 1 day performance variables. When get this variable, always return 1. Enumeration: 'reset': 1.
             zxAnPonOnuIfHis15MinPerfTable 1.3.6.1.4.1.3902.1082.500.4.2.2.5 no-access
The 15 minutes interval performance data table of PON ONU.
                 zxAnPonOnuIfHis15MinPerfEntry 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1 no-access
An entry in the ONU 15 minutes interval performance data table.
                     zxAnPonOnuIfH15MIntervalNo 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.1 integer32 no-access
Performance Data Interval. Interval 1 is the the most recent previous interval; Interval 96 is 24 hours ago. Intervals from 2 to 96 are optional.
                     zxAnPonOnuIfH15MValidData 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.2 truthvalue read-only
Performance data valid flag. true(1) means valid. false(2) means invalid and the performace data is useless.
                     zxAnPonOnuIfH15MDateAndTime 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.3 dateandtime read-only
15min performace data interval create time.
                     zxAnPonOnuIfH15MRxOctets 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.4 counter64 read-only
The 15 minutes interval octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH15MRxPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.5 counter64 read-only
The 15 minutes interval packets (including bad packets, broadcast packets, and multicast packets) received.
                     zxAnPonOnuIfH15MRxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.6 counter64 read-only
The 15 minutes interval good packets received that were directed to a unicast address.
                     zxAnPonOnuIfH15MRxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.7 counter64 read-only
The 15 minutes interval good packets received that were directed to a non-unicast address.
                     zxAnPonOnuIfH15MRxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.8 counter64 read-only
The 15 minutes interval good packets received that were directed to a multicast address.
                     zxAnPonOnuIfH15MRxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.9 counter64 read-only
The 15 minutes interval good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOnuIfH15MRxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.10 counter64 read-only
The 15 minutes interval discarded packets received.
                     zxAnPonOnuIfH15MRxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.11 counter64 read-only
The 15 minutes interval error packets received.
                     zxAnPonOnuIfH15MRxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.12 counter64 read-only
The 15 minutes interval packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfH15MRxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.13 counter64 read-only
The 15 minutes interval packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfH15MRxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.14 counter64 read-only
The 15 minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfH15MRx64Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.15 counter64 read-only
The 15 minutes interval packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH15MRx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.16 counter64 read-only
The 15 minutes interval packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH15MRx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.17 counter64 read-only
The 15 minutes interval packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH15MRx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.18 counter64 read-only
The 15 minutes interval packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH15MRx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.19 counter64 read-only
The 15 minutes interval packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH15MRx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.20 counter64 read-only
The 15 minutes interval packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH15MRxFragments 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.21 counter64 read-only
The 15 minutes interval packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfH15MRxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.22 counter64 read-only
The 15 minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfH15MTxOctets 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.36 counter64 read-only
The 15 minutes interval octets of data (including those in bad packets) sent on the network (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH15MTxPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.37 counter64 read-only
The 15 minutes interval packets (including bad packets, broadcast packets, and multicast packets) transmitted.
                     zxAnPonOnuIfH15MTxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.38 counter64 read-only
The 15 minutes interval good packets transmitted that were directed to a unicast address.
                     zxAnPonOnuIfH15MTxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.39 counter64 read-only
The 15 minutes interval good packets transmitted that were directed to a non-unicast address.
                     zxAnPonOnuIfH15MTxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.40 counter64 read-only
The 15 minutes interval good packets transmitted that were directed to a multicast address.
                     zxAnPonOnuIfH15MTxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.41 counter64 read-only
The 15 minutes interval good packets transmitted that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOnuIfH15MTxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.42 counter64 read-only
The 15 minutes interval discarded packets transmitted.
                     zxAnPonOnuIfH15MTxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.43 counter64 read-only
The 15 minutes interval error packets transmitted.
                     zxAnPonOnuIfH15MTxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.44 counter64 read-only
The 15 minutes interval packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfH15MTxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.45 counter64 read-only
The 15 minutes interval packets transmitted that were less than 64 octets long (excluding framing bits,but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfH15MTxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.46 counter64 read-only
The 15 minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfH15MTxPkts64Octets 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.47 counter64 read-only
The 15 minutes interval packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH15MTx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.48 counter64 read-only
The 15 minutes interval packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH15MTx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.49 counter64 read-only
The 15 minutes interval packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH15MTx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.50 counter64 read-only
The 15 minutes interval packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH15MTx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.51 counter64 read-only
The 15 minutes interval packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH15MTx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.52 counter64 read-only
The 15 minutes interval packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH15MTxFragments 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.53 counter64 read-only
The 15 minutes interval packets transmitted that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfH15MTxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.54 counter64 read-only
The 15 minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfH15MCollisions 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.70 counter64 read-only
The 15 minutes interval best estimate of collisions on this onu interface.
                     zxAnPonOnuIfH15MDropEvents 1.3.6.1.4.1.3902.1082.500.4.2.2.5.1.71 counter64 read-only
The 15 minutes interval events in which packets were dropped by the probe due to lack of resources.
             zxAnPonOnuIfHis1DayPerfTable 1.3.6.1.4.1.3902.1082.500.4.2.2.6 no-access
The 1 day interval performance data table of PON ONU.
                 zxAnPonOnuIfHis1DayPerfEntry 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1 no-access
The 1 day interval performance data entry of interfaces.
                     zxAnPonOnuIfH1DIntervalNo 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.1 integer32 no-access
Performance Data Interval 1 is the the most recent previous interval Interval 7 is 1 week ago. Intervals from 2 to 7 are optional.
                     zxAnPonOnuIfH1DValidData 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.2 truthvalue read-only
Performance data valid flag. true(1) means valid. false(2) means invalid and the performace data is useless.
                     zxAnPonOnuIfH1DDateAndTime 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.3 dateandtime read-only
1 day performace data interval create time.
                     zxAnPonOnuIfH1DRxOctets 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.4 counter64 read-only
The 1 day interval octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH1DRxPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.5 counter64 read-only
The 1 day interval packets (including bad packets, broadcast packets, and multicast packets) received.
                     zxAnPonOnuIfH1DRxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.6 counter64 read-only
The 1 day interval good packets received that were directed to a unicast address.
                     zxAnPonOnuIfH1DRxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.7 counter64 read-only
The 1 day interval good packets received that were directed to a non-unicast address.
                     zxAnPonOnuIfH1DRxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.8 counter64 read-only
The 1 day interval good packets received that were directed to a multicast address.
                     zxAnPonOnuIfH1DRxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.9 counter64 read-only
The 1 day interval good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOnuIfH1DRxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.10 counter64 read-only
The 1 day interval discarded packets received.
                     zxAnPonOnuIfH1DRxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.11 counter64 read-only
The 1 day interval error packets received.
                     zxAnPonOnuIfH1DRxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.12 counter64 read-only
The 1 day interval packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfH1DRxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.13 counter64 read-only
The 1 day interval packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfH1DRxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.14 counter64 read-only
The 1 day interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfH1DRx64Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.15 counter64 read-only
The 1 day interval packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH1DRx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.16 counter64 read-only
The 1 day interval packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH1DRx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.17 counter64 read-only
The 1 day interval packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH1DRx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.18 counter64 read-only
The 1 day interval packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH1DRx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.19 counter64 read-only
The 1 day interval packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH1DRx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.20 counter64 read-only
The 1 day interval packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH1DRxFragments 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.21 counter64 read-only
The 1 day interval packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfH1DRxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.22 counter64 read-only
The 1 day interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfH1DTxOctets 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.36 counter64 read-only
The 1 day interval octets of data (including those in bad packets) sent on the network (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH1DTxPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.37 counter64 read-only
The 1 day interval packets (including bad packets, broadcast packets, and multicast packets) transmitted.
                     zxAnPonOnuIfH1DTxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.38 counter64 read-only
The 1 day interval good packets transmitted that were directed to a unicast address.
                     zxAnPonOnuIfH1DTxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.39 counter64 read-only
The 1 day interval good packets transmitted that were directed to a non-unicast address.
                     zxAnPonOnuIfH1DTxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.40 counter64 read-only
The 1 day interval good packets transmitted that were directed to a multicast address.
                     zxAnPonOnuIfH1DTxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.41 counter64 read-only
The 1 day interval good packets transmitted that were directed to the broadcast address. Note that this does not include multicast packets.
                     zxAnPonOnuIfH1DTxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.42 counter64 read-only
The 1 day interval discarded packets transmitted.
                     zxAnPonOnuIfH1DTxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.43 counter64 read-only
The 1 day interval error packets transmitted.
                     zxAnPonOnuIfH1DTxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.44 counter64 read-only
The 1 day interval packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfH1DTxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.45 counter64 read-only
The 1 day interval packets transmitted that were less than 64 octets long (excluding framing bits,but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfH1DTxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.46 counter64 read-only
The 1 day interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                     zxAnPonOnuIfH1DTxPkts64Octets 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.47 counter64 read-only
The 1 day interval packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH1DTx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.48 counter64 read-only
The 1 day interval packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH1DTx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.49 counter64 read-only
The 1 day interval packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH1DTx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.50 counter64 read-only
The 1 day interval packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH1DTx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.51 counter64 read-only
The 1 day interval packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH1DTx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.52 counter64 read-only
The 1 day interval packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                     zxAnPonOnuIfH1DTxFragments 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.53 counter64 read-only
The 1 day interval packets transmitted that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfH1DTxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.54 counter64 read-only
The 1 day interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                     zxAnPonOnuIfH1DCollisions 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.70 counter64 read-only
The 1 day interval best estimate of collisions on this onu interface.
                     zxAnPonOnuIfH1DDropEvents 1.3.6.1.4.1.3902.1082.500.4.2.2.6.1.71 counter64 read-only
The 1 day interval events in which packets were dropped by the probe due to lack of resources.
             zxAnPonOnuPerfAlmPrfTable 1.3.6.1.4.1.3902.1082.500.4.2.2.7 no-access
The performance alarm threshold profile list table of interfaces.
                 zxAnPonOnuPerfAlmPrfEntry 1.3.6.1.4.1.3902.1082.500.4.2.2.7.1 no-access
The performance alarm threshold profile applying entry of interfaces.
                     zxAnPonOnuPerfAlmPrfName 1.3.6.1.4.1.3902.1082.500.4.2.2.7.1.1 displaystring no-access
The performance alarm threshold profile name.
                     zxAnPonOnuPerfAlmPrfRowStatus 1.3.6.1.4.1.3902.1082.500.4.2.2.7.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
             zxAnPonOnuPerfAlmPrfConfTable 1.3.6.1.4.1.3902.1082.500.4.2.2.8 no-access
The performance alarm threshold profile table of interfaces.
                 zxAnPonOnuPerfAlmPrfConfEntry 1.3.6.1.4.1.3902.1082.500.4.2.2.8.1 no-access
An entry in zxAnPonOnuPerfAlmPrfConfTable. When a manager wants to create or modify an ONU performance alarm threshold item,it must comply with the multi-variables usage rule that all the mib variables related to same fuction must be in one snmp set operation, the variables have only one type: mandatory. Mandatory variables must be in the one snmp set operation. To create an ONU performance alarm threshold item on different level, alarm threshold ,restore threshold and zxAnPonOnuPerfAlmConfRowStatus should be in one snmp set operation. The alarm threshold and restore threshold variables in the one snmp set operationshould be on same level. Such as: zxAnPonOnuPerfRiseAlmThresh and zxAnPonOnuPerfRiseAlmClrThresh, zxAnPonOnuPerfRiseWarnThresh and zxAnPonOnuPerfRiseWarnClrThresh, zxAnPonOnuPerfFallWarnThresh and zxAnPonOnuPerfFallWarnClrThresh, zxAnPonOnuPerfFallAlmThresh and zxAnPonOnuPerfFallAlmClrThresh. To modify an ONU performance alarm threshold item on different level,alarm threshold and restore threshold should be also in the one snmp set operation regardless of modifying alarm or restore threshold value alone. The alarm threshold and restore threshold variables in the one snmp set operationshould be on same level. Such as: zxAnPonOnuPerfRiseAlmThresh and zxAnPonOnuPerfRiseAlmClrThresh, zxAnPonOnuPerfRiseWarnThresh and zxAnPonOnuPerfRiseWarnClrThresh, zxAnPonOnuPerfFallWarnThresh and zxAnPonOnuPerfFallWarnClrThresh, zxAnPonOnuPerfFallAlmThresh and zxAnPonOnuPerfFallAlmClrThresh. To remove an ONU performance alarm threshold item, only zxAnPonOnuPerfAlmConfRowStatus should be set to destroy(6) while all levels of this ONU performance alarm threshold item will be removed.
                     zxAnPonOnuPerfVariable 1.3.6.1.4.1.3902.1082.500.4.2.2.8.1.1 object identifier no-access
The object identifier of performance variables.
                     zxAnPonOnuPerfRiseAlmThresh 1.3.6.1.4.1.3902.1082.500.4.2.2.8.1.2 hcperfcurrentcount read-only
The threshold for rising alarm.
                     zxAnPonOnuPerfRiseAlmClrThresh 1.3.6.1.4.1.3902.1082.500.4.2.2.8.1.3 hcperfcurrentcount read-only
The threshold for rising alarm restore.
                     zxAnPonOnuPerfRiseWarnThresh 1.3.6.1.4.1.3902.1082.500.4.2.2.8.1.4 hcperfcurrentcount read-only
The threshold for rising warning.
                     zxAnPonOnuPerfRiseWarnClrThresh 1.3.6.1.4.1.3902.1082.500.4.2.2.8.1.5 hcperfcurrentcount read-only
The threshold for rising warning restore.
                     zxAnPonOnuPerfFallWarnThresh 1.3.6.1.4.1.3902.1082.500.4.2.2.8.1.6 hcperfcurrentcount read-only
The threshold for falling warning.
                     zxAnPonOnuPerfFallWarnClrThresh 1.3.6.1.4.1.3902.1082.500.4.2.2.8.1.7 hcperfcurrentcount read-only
The threshold for falling warning restore.
                     zxAnPonOnuPerfFallAlmThresh 1.3.6.1.4.1.3902.1082.500.4.2.2.8.1.8 hcperfcurrentcount read-only
The threshold for falling alarm.
                     zxAnPonOnuPerfFallAlmClrThresh 1.3.6.1.4.1.3902.1082.500.4.2.2.8.1.9 hcperfcurrentcount read-only
The threshold for falling alarm restore.
                     zxAnPonOnuPerfThreshUsed 1.3.6.1.4.1.3902.1082.500.4.2.2.8.1.10 bits read-only
The threshold used flag for falling alarm restore. Bits: 'fallWarnThresh': 4, 'fallAlmClrThresh': 7, 'fallWarnClrThresh': 5, 'riseAlmClrThresh': 1, 'riseWarnThresh': 2, 'fallAlmThresh': 6, 'riseWarnClrThresh': 3, 'riseAlmThresh': 0.
                     zxAnPonOnuPerfAlmConfRowStatus 1.3.6.1.4.1.3902.1082.500.4.2.2.8.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
             zxAnPonOnuPerfAlmPrfApplyTable 1.3.6.1.4.1.3902.1082.500.4.2.2.9 no-access
The performance alarm threshold profile applying table of interfaces.
                 zxAnPonOnuPerfAlmPrfApplyEntry 1.3.6.1.4.1.3902.1082.500.4.2.2.9.1 no-access
An entry in zxAnPonOnuPerfAlmPrfApplyTable. The index 'zxAnPonOnuIndex' represents the normal ONU index. When a manager wants to apply an ONU performance alarm profile to specificed ONU interface,it must comply with the multi-variables usage rule that all the mib variables related to same fuction must be in one snmp set operation, the variables have only one type: mandatory. Mandatory variables must be in the one snmp set operation. To apply an ONU performance alarm profile to the specificed ONU interface, 'zxAnPonOnuPerfAlmPrf' and 'zxAnPonOnuAlmPrfApplyRowStatus' should be in the one snmp set operation. To remove the application of an ONU performance alarm profile to the specificed ONU interface, only 'zxAnPonOnuAlmPrfApplyRowStatus' should be set to destroy(6).
                     zxAnPonOnuPerfAlmPrf 1.3.6.1.4.1.3902.1082.500.4.2.2.9.1.1 displaystring read-only
The performance alarm threshold profile.
                     zxAnPonOnuAlmPrfApplyRowStatus 1.3.6.1.4.1.3902.1082.500.4.2.2.9.1.50 rowstatus read-only
The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager must set this object to destroy(6). To query this object, always return 1.
             zxAnPonOnuIfCurrMinPerfTable 1.3.6.1.4.1.3902.1082.500.4.2.2.10 no-access
The minutes interval performance data table of PON ONU interface.
                   zxAnPonOnuIfCurrMinPerfEntry 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1 no-access
An entry in the ONU minutes interval performance data table.
                       zxAnPonOnuIfCMinTimeElapsed 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.1 hcperftimeelapsed read-only
Number of seconds that have elapsed since the beginning of the current minutes interval.
                       zxAnPonOnuIfCMinRxOctets 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.2 counter64 read-only
The current minutes interval octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfCMinRxPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.3 counter64 read-only
The current minutes interval packets (including bad packets, broadcast packets, and multicast packets) received.
                       zxAnPonOnuIfCMinRxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.4 counter64 read-only
The current minutes interval good packets received that were directed to a unicast address.
                       zxAnPonOnuIfCMinRxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.5 counter64 read-only
The current minutes interval good packets received that were directed to a non-unicast address.
                       zxAnPonOnuIfCMinRxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.6 counter64 read-only
The current minutes interval good packets received that were directed to a multicast address.
                       zxAnPonOnuIfCMinRxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.7 counter64 read-only
The current minutes interval good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
                       zxAnPonOnuIfCMinRxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.8 counter64 read-only
The current minutes interval discarded packets received.
                       zxAnPonOnuIfCMinRxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.9 counter64 read-only
The current minutes interval error packets received.
                       zxAnPonOnuIfCMinRxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.10 counter64 read-only
The current minutes interval packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOnuIfCMinRxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.11 counter64 read-only
The current minutes interval packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       zxAnPonOnuIfCMinRxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.12 counter64 read-only
The current minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       zxAnPonOnuIfCMinRx64Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.13 counter64 read-only
The current minutes interval packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfCMinRx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.14 counter64 read-only
The current minutes interval packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfCMinRx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.15 counter64 read-only
The current minutes interval packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfCMinRx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.16 counter64 read-only
The current minutes interval packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfCMinRx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.17 counter64 read-only
The current minutes interval packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfCMinRx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.18 counter64 read-only
The current minutes interval packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfCMinRxFragments 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.19 counter64 read-only
The current minutes interval packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOnuIfCMinRxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.20 counter64 read-only
The current minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOnuIfCMinTxOctets 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.36 counter64 read-only
The current minutes interval octets of data (including those in bad packets) sent on the network (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfCMinTxPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.37 counter64 read-only
The current minutes interval packets (including bad packets, broadcast packets, and multicast packets) transmitted.
                       zxAnPonOnuIfCMinTxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.38 counter64 read-only
The current minutes interval good packets transmitted that were directed to a unicast address.
                       zxAnPonOnuIfCMinTxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.39 counter64 read-only
The current minutes interval good packets transmitted that were directed to a non-unicast address.
                       zxAnPonOnuIfCMinTxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.40 counter64 read-only
The current minutes interval good packets transmitted that were directed to a multicast address.
                       zxAnPonOnuIfCMinTxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.41 counter64 read-only
The current minutes interval good packets transmitted that were directed to the broadcast address. Note that this does not include multicast packets.
                       zxAnPonOnuIfCMinTxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.42 counter64 read-only
The current minutes interval discarded packets transmitted.
                       zxAnPonOnuIfCMinTxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.43 counter64 read-only
The current minutes interval error packets transmitted.
                       zxAnPonOnuIfCMinTxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.44 counter64 read-only
The current minutes interval packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOnuIfCMinTxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.45 counter64 read-only
The current minutes interval packets transmitted that were less than 64 octets long (excluding framing bits,but including FCS octets) and were otherwise well formed.
                       zxAnPonOnuIfCMinTxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.46 counter64 read-only
The current minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       zxAnPonOnuIfCMinTxPkts64Octets 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.47 counter64 read-only
The current minutes interval packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfCMinTx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.48 counter64 read-only
The current minutes interval packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfCMinTx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.49 counter64 read-only
The current minutes interval packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfCMinTx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.50 counter64 read-only
The current minutes interval packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfCMinTx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.51 counter64 read-only
The current minutes interval packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfCMinTx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.52 counter64 read-only
The current minutes interval packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfCMinTxFragments 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.53 counter64 read-only
The current minutes interval packets transmitted that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOnuIfCMinTxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.54 counter64 read-only
The current minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOnuIfCMinCollisions 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.70 counter64 read-only
The current minutes interval best estimate of collisions on this onu interface.
                       zxAnPonOnuIfCMinDropEvents 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.71 counter64 read-only
The current minutes interval events in which packets were dropped by the probe due to lack of resources.
                       zxAnPonOnuIfCMinPerfReset 1.3.6.1.4.1.3902.1082.500.4.2.2.10.1.100 integer read-write
Clear all the current minutes interval performance variables. When get this variable, always return 1. Enumeration: 'reset': 1.
             zxAnPonOnuIfHisMinPerfTable 1.3.6.1.4.1.3902.1082.500.4.2.2.11 no-access
The minutes interval history performance data table of PON ONU.
                   zxAnPonOnuIfHisMinPerfEntry 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1 no-access
An entry in the ONU minutes interval history performance data table.
                       zxAnPonOnuIfHMinIntervalNo 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.1 integer32 no-access
Performance data interval number.
                       zxAnPonOnuIfHMinValidData 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.2 truthvalue read-only
Performance data valid flag. true(1) means valid. false(2) means invalid and the performace data is useless.
                       zxAnPonOnuIfHMinDateAndTime 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.3 dateandtime read-only
The minutes interval performance data generation time.
                       zxAnPonOnuIfHMinRxOctets 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.4 counter64 read-only
The minutes interval octets of data (including those in bad packets) received on the network (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfHMinRxPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.5 counter64 read-only
The minutes interval packets (including bad packets, broadcast packets, and multicast packets) received.
                       zxAnPonOnuIfHMinRxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.6 counter64 read-only
The minutes interval good packets received that were directed to a unicast address.
                       zxAnPonOnuIfHMinRxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.7 counter64 read-only
The minutes interval good packets received that were directed to a non-unicast address.
                       zxAnPonOnuIfHMinRxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.8 counter64 read-only
The minutes interval good packets received that were directed to a multicast address.
                       zxAnPonOnuIfHMinRxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.9 counter64 read-only
The minutes interval good packets received that were directed to the broadcast address. Note that this does not include multicast packets.
                       zxAnPonOnuIfHMinRxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.10 counter64 read-only
The minutes interval discarded packets received.
                       zxAnPonOnuIfHMinRxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.11 counter64 read-only
The minutes interval error packets received.
                       zxAnPonOnuIfHMinRxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.12 counter64 read-only
The minutes interval packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOnuIfHMinRxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.13 counter64 read-only
The minutes interval packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       zxAnPonOnuIfHMinRxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.14 counter64 read-only
The minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       zxAnPonOnuIfHMinRx64Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.15 counter64 read-only
The minutes interval packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfHMinRx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.16 counter64 read-only
The minutes interval packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfHMinRx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.17 counter64 read-only
The minutes interval packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfHMinRx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.18 counter64 read-only
The minutes interval packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfHMinRx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.19 counter64 read-only
The minutes interval packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfHMinRx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.20 counter64 read-only
The minutes interval packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfHMinRxFragments 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.21 counter64 read-only
The minutes interval packets received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOnuIfHMinRxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.22 counter64 read-only
The minutes interval packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOnuIfHMinTxOctets 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.36 counter64 read-only
The minutes interval octets of data (including those in bad packets) sent on the network (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfHMinTxPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.37 counter64 read-only
The minutes interval packets (including bad packets, broadcast packets, and multicast packets) transmitted.
                       zxAnPonOnuIfHMinTxUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.38 counter64 read-only
The minutes interval good packets transmitted that were directed to a unicast address.
                       zxAnPonOnuIfHMinTxNUcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.39 counter64 read-only
The minutes interval good packets transmitted that were directed to a non-unicast address.
                       zxAnPonOnuIfHMinTxMcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.40 counter64 read-only
The minutes interval good packets transmitted that were directed to a multicast address.
                       zxAnPonOnuIfHMinTxBcastPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.41 counter64 read-only
The minutes interval good packets transmitted that were directed to the broadcast address. Note that this does not include multicast packets.
                       zxAnPonOnuIfHMinTxDiscardPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.42 counter64 read-only
The minutes interval discarded packets transmitted.
                       zxAnPonOnuIfHMinTxErrPkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.43 counter64 read-only
The minutes interval error packets transmitted.
                       zxAnPonOnuIfHMinTxCrcAlignErrors 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.44 counter64 read-only
The minutes interval packets transmitted that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOnuIfHMinTxUndersizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.45 counter64 read-only
The minutes interval packets transmitted that were less than 64 octets long (excluding framing bits,but including FCS octets) and were otherwise well formed.
                       zxAnPonOnuIfHMinTxOversizePkts 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.46 counter64 read-only
The minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed.
                       zxAnPonOnuIfHMinTxPkts64Octets 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.47 counter64 read-only
The minutes interval packets (including bad packets) transmitted that were 64 octets in length (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfHMinTx65To127Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.48 counter64 read-only
The minutes interval packets (including bad packets) transmitted that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfHMinTx128To255Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.49 counter64 read-only
The minutes interval packets (including bad packets) transmitted that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfHMinTx256To511Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.50 counter64 read-only
The minutes interval packets (including bad packets) transmitted that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfHMinTx512To1023Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.51 counter64 read-only
The minutes interval packets (including bad packets) transmitted that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfHMinTx1024To1518Octs 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.52 counter64 read-only
The minutes interval packets (including bad packets) transmitted that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets).
                       zxAnPonOnuIfHMinTxFragments 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.53 counter64 read-only
The minutes interval packets transmitted that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOnuIfHMinTxJabbers 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.54 counter64 read-only
The minutes interval packets transmitted that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error).
                       zxAnPonOnuIfHMinCollisions 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.70 counter64 read-only
The minutes interval best estimate of collisions on this onu interface.
                       zxAnPonOnuIfHMinDropEvents 1.3.6.1.4.1.3902.1082.500.4.2.2.11.1.71 counter64 read-only
The minutes interval events in which packets were dropped by the probe due to lack of resources.
     zxAnPonPerfConformance 1.3.6.1.4.1.3902.1082.500.4.4
         zxAnPonPerfCompliances 1.3.6.1.4.1.3902.1082.500.4.4.1
             zxAnPonPerfObjectConformance 1.3.6.1.4.1.3902.1082.500.4.4.1.1
The compliance statement for entities which implement the ZTE-AN-PON-PERF-MIB.
         zxAnPonPerfGroups 1.3.6.1.4.1.3902.1082.500.4.4.2
             zxAnPonIfPerfGroup 1.3.6.1.4.1.3902.1082.500.4.4.2.1
A collection of objects for interface statistic configuration.