ZTE-AN-CLOCK-MIB: View SNMP OID List / Download MIB

VENDOR: ZHONGXING TELECOM CO.,LTD. (ABBR. ZTE)


 Home MIB: ZTE-AN-CLOCK-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, ZTE-AN-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zxAnClockMib 1.3.6.1.4.1.3902.1082.120.10
The MIB module for the management of Clock.
       zxAnClockGlobalObjects 1.3.6.1.4.1.3902.1082.120.10.1
           zxAnClockExtOutQlMinimum 1.3.6.1.4.1.3902.1082.120.10.1.1 integer read-only
The ssm threshold to open or close external output clock(T4). open : QL >= zxAnClockExtOutQlMinimum close : QL < zxAnClockExtOutQlMinimum First time to set this object: zxAnClockExtOutMode must be set together, and inhibit zxAnClockExtOutQlMinimum be ssmNULL or zxAnClockExtOutMode be clockNULL. normal set: will change the ssm threshold. SsmNULL value only can be set when zxAnClockExtOutMode is setted clockNULL, means destroy the config of external output clock. get: ssmNull means no external output clock config Enumeration: 'qlprc': 2, 'qlsec': 11, 'qlssua': 4, 'qlssub': 8, 'ssmNULL': 255.
           zxAnClockExtOutMode 1.3.6.1.4.1.3902.1082.120.10.1.2 integer read-only
Mode of external output clock. First time to set this object: zxAnClockExtOutQlMinimum must be set together, and inhibit zxAnClockExtOutQlMinimum be ssmNULL or zxAnClockExtOutMode be clockNULL. Normal operator: change external output clock mode; clockNULL value only can be set when zxAnClockExtOutQlMinimum is setted ssmNull, means destroy the config of external output clock. Enumeration: 'hz': 1, 'unreadableSsm': 3, 'readableSsm': 2, 'clockNULL': 255.
           zxAnClockWorkMode 1.3.6.1.4.1.3902.1082.120.10.1.3 integer read-write
This attribute specifies the clock work mode comply with G.781 section 5.12 Automatic reference selection process. Enumeration: 'qldisable': 2, 'qlenable': 1.
           zxAnClockWaitToRestoreTime 1.3.6.1.4.1.3902.1082.120.10.1.4 integer32 read-write
This attribute specifies the clock source wait to restore time, comply with G.781 section 5.9 wait to restore time.
           zxAnClockHoldOffTime 1.3.6.1.4.1.3902.1082.120.10.1.5 integer32 read-write
This attribute specifies the clock source hold-off Time, comply with G.781 section 5.8 hold-off time.
           zxAnClockOperationStatus 1.3.6.1.4.1.3902.1082.120.10.1.6 integer read-write
This attribute specifies clock operation status. freerunPhaselockedNormal,holdOver: set means force PLL switch to freerun/holdover state. geted means PLL is forced by freerun/holdover operator. destoryFreerunOrHoldOver: write only, means destroy freerun/holdover operator. unknown: read only, means no any force operator exist. Enumeration: 'unknown': 255, 'destoryFreerunOrHoldOver': 21, 'freerunPhaselockedNormal': 1, 'holdOver': 2.
           zxAnClockActiveId 1.3.6.1.4.1.3902.1082.120.10.1.7 integer32 read-only
Active clock id. If get zero,means Internal clock is active. If not,means zxAnClockActiveId is a giving zxAnClockSrcId which related to a record of zxAnClockSrcTable.
           zxAnClockPllState 1.3.6.1.4.1.3902.1082.120.10.1.8 integer read-only
state of pll. preLocked2: This state is very similar to the preLocked state. It is entered from the Holdover state when a reference source has been selected and applied to the phase locked loop. Enumeration: 'preLocked': 6, 'outOfPhase': 7, 'holdOver': 2, 'pllWrong': 11, 'locked': 4, 'pllFreerun': 1, 'preLocked2': 5.
           zxAnClockSrcSwitchReason 1.3.6.1.4.1.3902.1082.120.10.1.9 integer32 read-only
clock source switch reason: 1, CLOCKSOURCE_SWITCH_ABMNORMAL, 2, CLOCKSOURCE_SWITCH_S1CHANGE, 3, CLOCKSOURCE_SWITCH_ALMCHANGE, 4, CLOCKSOURCE_SWITCH_PRICHANGE, 5, CLOCKSOURCE_SWITCH_OUTOFLOCK, 6, CLOCKSOURCE_SWITCH_DEGRADE, 7, LOCKSOURCE_SWITCH_PLLFAIL, 8, CLOCKSOURCE_SWITCH_PRELOCKFAIL, 9, CLOCKSOURCE_SWITCH_HOLDOVESTOP, 10, CLOCKSOURCE_SWITCH_LOADCFG, 11, CLOCKSOURCE_SWITCH_ALMRESTORE, 12, CLOCKSOURCE_SWITCH_PROTECT, 13, CLOCKSOURCE_SWITCH_PROTECT_CANCEL, 14, CLOCKSOURCE_SWITCH_BACKUP_PLLFAIL,
           zxAnClockSrcSwitchOldInfo 1.3.6.1.4.1.3902.1082.120.10.1.10 integer32 read-only
the active clock source identify before switch: |shelf| slot | port |clockType| 0000 0000 0000 0000 0000 0000 0000 0000 clockType: 0: internal clock 2: external clock 3: E1 clock not supported this version 6: synchronous ethernet equipment clock 7: SDH clock not supported this version 8: PTP clock not supported this version
           zxAnClockSrcSwitchNewInfo 1.3.6.1.4.1.3902.1082.120.10.1.11 integer32 read-only
the active clock source identify after switch: |shelf| slot | port |clockType| 0000 0000 0000 0000 0000 0000 0000 0000 clockType: 0: internal clock 2: external clock 3: E1 clock not supported this version 6: synchronous ethernet equipment clock 7: SDH clock not supported this version 8: PTP clock not supported this version
           zxAnClockLastPllStatus 1.3.6.1.4.1.3902.1082.120.10.1.12 integer read-only
The last status of clock PLL. Enumeration: 'preLocked': 6, 'outOfPhase': 7, 'holdOver': 2, 'pllWrong': 11, 'locked': 4, 'pllFreerun': 1, 'preLocked2': 5.
       zxAnClockObjects 1.3.6.1.4.1.3902.1082.120.10.2
           zxAnClockSrcFunc 1.3.6.1.4.1.3902.1082.120.10.2.1
               zxAnClockSrcTable 1.3.6.1.4.1.3902.1082.120.10.2.1.1 no-access
                   zxAnClockSrcEntry 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1 no-access
ClockSource entry. Entries in the zxClockSrcTable are created and deleted by using zxAnClockSrcEntryStatus object. When create the zxClockSrcTable, zxAnClockSrcShelf, zxAnClockSrcSlot, zxAnClockSrcPort, zxAnClockSrcType, zxAnClockSrcPriority must be setted together. zxAnClockSrcExtInQuality and zxAnClockSrcExtInMode must be setted when creating externalClock, zxAnClockSrcShelf, zxAnClockSrcSlot,zxAnClockSrcPort, zxAnClockSrcType and zxAnClockSrcExtInMode do not support modify. only one EEC port can be configed per card of which supporting synchronous ethernet equipment clock
                       zxAnClockSrcId 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.1 integer32 no-access
clock source id
                       zxAnClockSrcShelf 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.2 integer32 read-only
This object indicates the shelf number.
                       zxAnClockSrcSlot 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.3 integer32 read-only
This object indicates the slot number. In IEC19Shelf type ,value 21,22 are not supported.
                       zxAnClockSrcPort 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.4 integer32 read-only
This object indicates the port number. 0 is only used for internal clock source. 1-4 is used for uplink card. 1-2 is used for common interface card, and other clock support card(CES) .
                       zxAnClockSrcType 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.5 integer read-only
This object indicates the source type internalClock,maintainClock for master card externalClock for interface card e1Clock not supported this version stm1Clock,stm4Clock,sdhClock not supported this version syncEth for syncE card ptpClock not supported this version This object can not be modified. Enumeration: 'internalClock': 1, 'maintainClock': 2, 'stm4Clock': 6, 'e1Clock': 4, 'sdhClock': 8, 'ptpClock': 9, 'externalClock': 3, 'stm1Clock': 5, 'syncEth': 7.
                       zxAnClockSrcPriority 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.6 integer32 read-only
1 has the highest priority. Priority can be write 1-250, when zxClockSrcPriority is created and modified.
                       zxAnClockSrcTxS1 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.7 integer32 read-only
transmitted QL-level
                       zxAnClockSrcRxS1 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.8 integer32 read-only
received QL-level. 16-254 not supported.255 means not received QL-level.
                       zxAnClockSrcAlarm 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.9 integer read-only
This attribute specifies alarm of this clock reference source. normal: the alarm status is normal, this value is disused. abnormal: the alarm status is abnormal, this value is disused. los: loss of signal status. lockAlam: exceed of frequency status. s1Mismatch:S1 mismatch status. lockOut: lockOut status. qlFail: quality level fail status. lostEsmc: loss of ESMC status. waitToRecover: wait the clock source to recover. noAlarm: no alarm, the normal status. Enumeration: 'qlFail': 7, 'lostEsmc': 8, 's1Mismatch': 5, 'normal': 1, 'noAlarm': 255, 'abnormal': 2, 'waitToRecover': 9, 'los': 3, 'lockAlam': 4, 'lockOut': 6.
                       zxAnClockSrcExtInQuality 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.10 integer read-only
Quality level of input clock. This object must be written with a certain value excluding SsmNULL when creating external clock. Enumeration: 'qlsec': 11, 'qlprc': 2, 'qldn': 15, 'qlssua': 4, 'qlssub': 8, 'ssmNULL': 255.
                       zxAnClockSrcExtInMode 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.11 integer read-only
Mode of external input clock. This object must be written with a certain value excluding clockNULL when creating external clock. Enumeration: 'hz': 1, 'unreadableSsm': 3, 'readableSsm': 2, 'clockNULL': 255.
                       zxAnClockSrcSwitchMode 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.12 integer read-only
This attribute specifies clock source switch mode in G.781. none: no switch operator on or be locked out. forced: force switch on. manual: manual switch on. lockOut: be locked out. Enumeration: 'forced': 2, 'none': 1, 'lockOut': 4, 'manual': 3.
                       zxAnClockSrcEntryStatus 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.50 rowstatus read-only
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnClockSrcId and zxAnClockSrcShelf and zxAnClockSrcSlot and zxAnClockSrcIPort and zxAnClockSrcType and zxAnClockSrcPriority have been set. To delete a row in this table, a manager must set this object to destroy(6).
           zxAnClockSsmFunc 1.3.6.1.4.1.3902.1082.120.10.2.2
               zxAnClockSsmSendTable 1.3.6.1.4.1.3902.1082.120.10.2.2.1 no-access
SSM/QL-level overwriting management of clock tx port.
                   zxAnClockSsmSendEntry 1.3.6.1.4.1.3902.1082.120.10.2.2.1.1 no-access
It is entry in the zxClockSsmSendTable. Entries in the zxClockSsmSendTable are created and deleted using the zxClockSsmSendRowStatus object. When create the zxAnClockSsmSendTable, zxAnClockSsmSendShelf, zxAnClockSsmSendSlot,zxAnClockSsmSendPort, zxAnClockSsmSendBytes must be setted together.Only support Pon and SyncE port.
                       zxAnClockSsmSendId 1.3.6.1.4.1.3902.1082.120.10.2.2.1.1.1 integer32 no-access
ssm send id
                       zxAnClockSsmSendShelf 1.3.6.1.4.1.3902.1082.120.10.2.2.1.1.2 integer32 read-only
This object indicates the shelf number.
                       zxAnClockSsmSendSlot 1.3.6.1.4.1.3902.1082.120.10.2.2.1.1.3 integer32 read-only
Tis object indicates the slot number. In IEC19Shelf type ,value 21,22 are not supported.
                       zxAnClockSsmSendPort 1.3.6.1.4.1.3902.1082.120.10.2.2.1.1.4 integer32 read-only
Tis object indicates the port number. 1-4 is used for uplink card. 1-8 is used for pon card
                       zxAnClockSsmSendBytes 1.3.6.1.4.1.3902.1082.120.10.2.2.1.1.5 integer32 read-only
This attribute defines the SSM sent bytes. Only support 0,2,4,8,11,15.
                       zxAnClockSsmSendRowStatus 1.3.6.1.4.1.3902.1082.120.10.2.2.1.1.50 rowstatus read-only
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnClockSsmSendShelf and zxAnClockSsmSendSlot and zxAnClockSsmSendPort and zxAnClockSsmSendBytes have been set.The port-type must be syncE or Pon. To delete a row in this table, a manager must set this object to destroy(6).
               zxAnClockEsmcTable 1.3.6.1.4.1.3902.1082.120.10.2.2.2 no-access
This managed entity represents the ESMC(Ethernet Synchronization Messaging Channel).
                   zxAnClockEsmcEntry 1.3.6.1.4.1.3902.1082.120.10.2.2.2.1 no-access
It is entry in the zxClockEsmcTable. Entries in the zxClockEsmcTable are created and deleted using the zxClockEsmcRowStatus object. When create the zxAnClockEsmcTable, zxAnClockEsmcShelf, zxAnClockEsmcSlot,zxAnClockEsmcPort, zxAnClockSsmSendBytes must be setted together.Only support Pon and SyncE port.
                       zxAnClockEsmcId 1.3.6.1.4.1.3902.1082.120.10.2.2.2.1.1 integer32 no-access
This object indicates clock ESMC recoder id.
                       zxAnClockEsmcShelf 1.3.6.1.4.1.3902.1082.120.10.2.2.2.1.2 integer32 read-only
This object indicates the shelf number.
                       zxAnClockEsmcSlot 1.3.6.1.4.1.3902.1082.120.10.2.2.2.1.3 integer32 read-only
This object indicates the slot number. In IEC19Shelf type ,value 21,22 are not supported.
                       zxAnClockEsmcPort 1.3.6.1.4.1.3902.1082.120.10.2.2.2.1.4 integer32 read-only
This object indicates the port number. 1-4 is used for uplink card. 1-8 is used for pon card.
                       zxAnClockEsmcRowStatus 1.3.6.1.4.1.3902.1082.120.10.2.2.2.1.50 rowstatus read-only
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the corresponding zxAnClockEsmcShelf and zxAnClockEsmcSlot and zxAnClockEsmcPort and have been set.The port-type must be syncE or Pon. To delete a row in this table, a manager must set this object to destroy(6).
           zxAnClockCardClockConfFunc 1.3.6.1.4.1.3902.1082.120.10.2.3
               zxAnClockCardClockConfTable 1.3.6.1.4.1.3902.1082.120.10.2.3.2 no-access
The card clock configuration table.
                   zxAnClockCardClockConfEntry 1.3.6.1.4.1.3902.1082.120.10.2.3.2.1 no-access
The card clock configuration entry.
                       zxAnClockCardClockConfRack 1.3.6.1.4.1.3902.1082.120.10.2.3.2.1.1 integer32 no-access
The rack number of the card.
                       zxAnClockCardClockConfShelf 1.3.6.1.4.1.3902.1082.120.10.2.3.2.1.2 integer32 no-access
The shelf number of the card.
                       zxAnClockCardClockConfSlot 1.3.6.1.4.1.3902.1082.120.10.2.3.2.1.3 integer32 no-access
The slot number of the card.
                       zxAnClockCardClockConfType 1.3.6.1.4.1.3902.1082.120.10.2.3.2.1.4 integer read-write
The card clock configuration type. There are two types: systemClock(1): it means the card clock type is the system clock. localClock(2): it means the card clock type is the local clock. Enumeration: 'systemClock': 1, 'localClock': 2.
       zxAnClockNotifications 1.3.6.1.4.1.3902.1082.120.10.3
           zxAnClockTraps 1.3.6.1.4.1.3902.1082.120.10.3.1
               zxAnClockSrcSwitch 1.3.6.1.4.1.3902.1082.120.10.3.1.1
for clock source switch incident report. reason:1-Abnormal,2-S1Changed,...; OldInfo:active clock source identify before switch; NewInfo:active clock source identify after switch;
               zxAnClockStatusChanged 1.3.6.1.4.1.3902.1082.120.10.3.1.2
A zxAnClockStatusChanged trap is sent when the agent has detected that the current clock status has been changed to another new clock status.
               zxAnClockEFDAlm 1.3.6.1.4.1.3902.1082.120.10.3.1.21
Exceeded frequency deviation alarm of clock signal Generate notification.
               zxAnClockEFDClr 1.3.6.1.4.1.3902.1082.120.10.3.1.22
Clear Exceeded frequency deviation alarm of clock signal. when the clock signal is normal,the alarm is restored.
               zxAnClockNoClkAvailableAlm 1.3.6.1.4.1.3902.1082.120.10.3.1.23
no available clock source in OLT.Generate notification.
               zxAnClockNoClkAvailableClr 1.3.6.1.4.1.3902.1082.120.10.3.1.24
Clear no available clock source alarm in OLT. when an available clock source occoured, the alarm is restored.
               zxAnClockLosLofAlm 1.3.6.1.4.1.3902.1082.120.10.3.1.25
Los Lof alarm of clock signal.Generate notification.
               zxAnClockLosLofClr 1.3.6.1.4.1.3902.1082.120.10.3.1.26
Clear Los Lof alarm of clock signal.. when the clock signal is normal, the alarm is restored.
               zxAnClockLockOutAlm 1.3.6.1.4.1.3902.1082.120.10.3.1.27
clock signal is setted lockout.Generate notification. not supported. need further study
               zxAnClockLockOutClr 1.3.6.1.4.1.3902.1082.120.10.3.1.28
Clear lockout alarm of clock signal. when the clock signal is clear lockout configure, alarm is restored. not supported. need further study
               zxAnClockQlFailAlm 1.3.6.1.4.1.3902.1082.120.10.3.1.29
Ql Fail alarm of clock signal.Generate notification.
               zxAnClockQlFailClr 1.3.6.1.4.1.3902.1082.120.10.3.1.30
Clear Ql Fail alarm of clock signal.. when the QL-level is available, alarm is restored.
               zxAnClockLosEsmcAlm 1.3.6.1.4.1.3902.1082.120.10.3.1.31
Loss of ESMC alarm of clock signal.Generate notification.
               zxAnClockLosEsmcClr 1.3.6.1.4.1.3902.1082.120.10.3.1.32
Loss of ESMC alarm of clock signal.. when the ESMC normal, alarm is restored.
       zxAnClockConformance 1.3.6.1.4.1.3902.1082.120.10.4
           zxAnClockCompliances 1.3.6.1.4.1.3902.1082.120.10.4.1
               zxAnClockCompliance 1.3.6.1.4.1.3902.1082.120.10.4.1.1
The compliance statement for entities which implement the ZTE-AN-CLOCK-MIB.
           zxAnClockGroups 1.3.6.1.4.1.3902.1082.120.10.4.2
               zxAnClockGlobalGroup 1.3.6.1.4.1.3902.1082.120.10.4.2.1
A collection of global objects providing clock functions
               zxAnClockSrcGroup 1.3.6.1.4.1.3902.1082.120.10.4.2.2
A collection of objects providing clock source configure functions
               zxAnClockSsmGroup 1.3.6.1.4.1.3902.1082.120.10.4.2.3
A collection of objects providing Esmc&SsmSend functions
               zxAnClockAlarmTrapGroup 1.3.6.1.4.1.3902.1082.120.10.4.2.4
A collection of objects providing clock alarm functions