ZHNWIRELESS: View SNMP OID List / Download MIB

VENDOR: ZHONE TECHNOLOGIES


 Home MIB: ZHNWIRELESS
Download as:   
SNMPv2-CONF, SNMPv2-SMI, Zhone, Zhone-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 zhnWireless 1.3.6.1.4.1.5504.2.5.46
This file defines the private Enterprise MIB extensions that define Wireless configuration and status objects supported by the Zhone ZNID CPEs.
       zhnWirelessObjects 1.3.6.1.4.1.5504.2.5.46.1
           wlBaseCfgTable 1.3.6.1.4.1.5504.2.5.46.1.1 no-access
Table of basic Wireless Adapter Configuration objects.
               wlBaseCfgEntry 1.3.6.1.4.1.5504.2.5.46.1.1.1 no-access
Table of entries of basic Wireless Adapter Configuration objects.
                   wlBaseCfgIndex 1.3.6.1.4.1.5504.2.5.46.1.1.1.1 unsigned32 no-access
Basic wireless adapter interface index.
                   wlBaseCfgEnable 1.3.6.1.4.1.5504.2.5.46.1.1.1.2 truthvalue read-write
Enable or disable the wireless adapter.
                   wlBaseCfgBand 1.3.6.1.4.1.5504.2.5.46.1.1.1.3 octet string read-only
Broadcast band (e.g. 2.4GHz operation).
                   wlBaseCfgChannel 1.3.6.1.4.1.5504.2.5.46.1.1.1.4 wlchannelselections read-write
The configured wifi channel number or 'auto' for automatic selection of a channel with low interference.
                   wlBaseCfgCurrentChannel 1.3.6.1.4.1.5504.2.5.46.1.1.1.5 wlchannelselections read-only
The actual wifi channel number in use.
                   wlBaseCfgBandwidth 1.3.6.1.4.1.5504.2.5.46.1.1.1.6 octet string read-only
Aggregate radio bandwidth.
                   wlBaseCfgAutoScanTimer 1.3.6.1.4.1.5504.2.5.46.1.1.1.7 unsigned32 read-write
When configured for auto mode, this timer value specifies how often to re-analyze the spectrum to select a low interference channel. Note: auto channel rescan will only occur when there are no actively connected devices.
                   wlBaseCfgMimoNEwc 1.3.6.1.4.1.5504.2.5.46.1.1.1.8 wlmimonewcmodes read-write
Radio 802.11n Enhanced Wireless Consortium (EWC) mode: auto(1) disable(2)
                   wlBaseCfgMimoNRate 1.3.6.1.4.1.5504.2.5.46.1.1.1.9 wlmimonrates read-write
The configured Multiple Input Multiple Output (MIMO) 802.11n rate. Enumeration of: auto(1), use54g(2), rate6Dot5(3), rate13(4), rate19Dot5(5), rate26(6), rate39(7), rate52(8), rate58Dot5(9), rate65(10), rate78(11), rate104(12), rate117(13), rate130(14)
                   wlBaseCfgMimoNProtection 1.3.6.1.4.1.5504.2.5.46.1.1.1.10 wlmimonprotectionmodes read-write
Multiple Input Multiple Output(MIMO) 802.11n protection mode. Enumeration of: off(1), auto(2),
                   wlBaseCfgNClientsOnly 1.3.6.1.4.1.5504.2.5.46.1.1.1.11 truthvalue read-write
Enable or disable the restriction of access to 802.11n clients, only. When enabled, prevent 802.11b/g clients from connecting.
                   wlBaseCfg54gRate 1.3.6.1.4.1.5504.2.5.46.1.1.1.12 wl54gmulticastrates read-write
The rate when the radio is operating in 802.11g mode. This object only applies when the Multiple Input Multiple Output (MIMO) 802.11n Rate is set to use54g(2). Enumeration of: rate1M(1), rate2M(2), rate5Dot5M(3), rate6M(4), rate9M(5), rate11M(6), rate12M(7), rate18M(8), rate24M(9), rate36M(10), rate48M(11), rate54M(12)
                   wlBaseCfgMulticastRate 1.3.6.1.4.1.5504.2.5.46.1.1.1.13 wl54gmulticastrates read-write
The rate for multicast traffic. Enumeration of: rate1M(1), rate2M(2), rate5Dot5M(3), rate6M(4), rate9M(5), rate11M(6), rate12M(7), rate18M(8), rate24M(9), rate36M(10), rate48M(11), rate54M(12)
                   wlBaseCfgBasicRate 1.3.6.1.4.1.5504.2.5.46.1.1.1.14 wlbasicrates read-write
The rate when the radio is operating in basic 802.11b/g mode. Enumeration of: default(1), -- use the factory defaulted basic rate all(2), -- allow all supported basic rates rate1And2(3), -- restrict the basic rates to 1Mbps and 2Mbps stdRates(4) -- restrict the basic rates to the standard rates of -- 1Mbps, 2Mbps, 5.5Mbps, 6Mbps, 11Mbps, 12Mbps, 24Mbps
                   wlBaseCfgFragThreshold 1.3.6.1.4.1.5504.2.5.46.1.1.1.15 unsigned32 read-write
The threshold at which packets are fragmented.
                   wlBaseCfgRTSThreshold 1.3.6.1.4.1.5504.2.5.46.1.1.1.16 unsigned32 read-write
The packet size of a request-to-send (RTS) transmission. A low threshold implies RTS packets are sent more frequently, thus requiring more bandwidth but ensuring packet transmission on a busy network.
                   wlBaseCfgDTIMInterval 1.3.6.1.4.1.5504.2.5.46.1.1.1.17 unsigned32 read-write
The interval at which Delivery Traffic Indication Messages (DTIM) are generated. A DTIM message notifies a wireless client that a packet is waiting for tranmission.
                   wlBaseCfgBeaconInterval 1.3.6.1.4.1.5504.2.5.46.1.1.1.18 unsigned32 read-write
The interval at which Beacons are generated.
                   wlBaseCfgGlobalMaxClients 1.3.6.1.4.1.5504.2.5.46.1.1.1.19 unsigned32 read-write
The maximum number of wireless client devices that may be simultaneously connected to the radio. This value should include the sum total of all clients on all active SSIDs.
                   wlBaseCfgXPress 1.3.6.1.4.1.5504.2.5.46.1.1.1.20 truthvalue read-write
Enable or disable the XPress(TM) Technology.
                   wlBaseCfgTxPowerPercent 1.3.6.1.4.1.5504.2.5.46.1.1.1.21 unsigned32 read-write
The percentage of total power that should be used for data transmissions.
                   wlBaseCfgWMMEnable 1.3.6.1.4.1.5504.2.5.46.1.1.1.22 truthvalue read-write
Enable or disable Wifi Multimedia. When set to TRUE, audio, video and voice application data is prioritized over other network traffic.
                   wlBaseCfgWMMNoAck 1.3.6.1.4.1.5504.2.5.46.1.1.1.23 truthvalue read-write
Enable or disable the suppression of acknowledgements for frames that do not require a QOS Acknowledgement. This avoids the unnecessary transmission of acknowledgements for highly time-critical data.
                   wlBaseCfgWMMApsd 1.3.6.1.4.1.5504.2.5.46.1.1.1.24 truthvalue read-write
Enable or disable the Automatic Power Save Delivery (APSD) power management method. This feature is useful for bi-directional applications, such as VoIp phones.
                   wlBaseCfgWpsAddClientMethod 1.3.6.1.4.1.5504.2.5.46.1.1.1.25 wlwpsaddclientmethod read-write
Configure the method of adding Clients: pushButton(1), accessPointPIN(2), stationPIN(3)
                   wlBaseCfgWpsApMode 1.3.6.1.4.1.5504.2.5.46.1.1.1.26 truthvalue read-only
Enable or disable WiFi Protected Setup (WPS) AP mode. If your provider is using an external registrar for security, select true(1). The PIN for AP mode is specified by the registrar. Provide this PIN to the client. Select wlBaseCfgWpsConfigAp to begin the registration process with the client.
                   wlBaseCfgWpsConfigAp 1.3.6.1.4.1.5504.2.5.46.1.1.1.27 truthvalue read-only
Start AP configuration. If your provider is using an external registrar for security, wlBaseCfgWpsApMode then select true(1) to begin the registration process with the client.
                   wlBaseCfgWpsDevicePIN 1.3.6.1.4.1.5504.2.5.46.1.1.1.28 octet string read-only
Device PIN provided by external registrar.
                   wlBaseCfgWpsAddEnrollee 1.3.6.1.4.1.5504.2.5.46.1.1.1.29 truthvalue read-only
Start AP configuration. If wlBaseCfgWpsAddClientMethod is set for pushButton(1), then the user must simultaneously push the WPS button on the rear panel of the wireless zNID and set this object to true(1) for push button registration on the client device.
                   wlBaseCfgWpsStationPIN 1.3.6.1.4.1.5504.2.5.46.1.1.1.30 octet string read-only
Station PIN provided by user.
                   wlBaseCfgBridgeRestrictMode 1.3.6.1.4.1.5504.2.5.46.1.1.1.31 wlbridgerestrictmodes read-write
Configure the bridge restriction mode: enable(1), enableScan(2), disable(3),
                   wlBaseCfgBridgeRefresh 1.3.6.1.4.1.5504.2.5.46.1.1.1.32 truthvalue read-only
Scans for any wireless bridge devices in range and displays them in the Remote Bridge MAC Address table. Selecting true(1) will update the wireless bridge devices in range. Wait for a few seconds for the update.
           wlVirtualIntfTable 1.3.6.1.4.1.5504.2.5.46.1.2 no-access
Table of Wireless Virtual LAN Interface Configuration, Status and Statistics objects.
               wlVirtualIntfEntry 1.3.6.1.4.1.5504.2.5.46.1.2.1 no-access
Entries in Wireless Vitrual LAN Interface Table.
                   wlVirtualIndex 1.3.6.1.4.1.5504.2.5.46.1.2.1.1 unsigned32 no-access
Basic access point interface index. Guest (or Virtual) access points begin with index = 2.
                   wlVirtualHide 1.3.6.1.4.1.5504.2.5.46.1.2.1.2 truthvalue read-write
Enable or disable the suppression of the advertising of the access point's SSID. If enabled, clients will need to configure the SSID to associate.
                   wlVirtualAPIsolation 1.3.6.1.4.1.5504.2.5.46.1.2.1.3 truthvalue read-write
Enable or disable the isolation of clients by enabling or disabling secure forwarding mode. This will preventpreventing one client from sending packets directly to another client. All packets are forwarded upstream on the WAN interface.
                   wlVirtualDisableWme 1.3.6.1.4.1.5504.2.5.46.1.2.1.4 truthvalue read-write
Enable or disable the Wireless Multi-Media mode.
                   wlVirtualEnableWmf 1.3.6.1.4.1.5504.2.5.46.1.2.1.5 truthvalue read-write
Enable or disable Wireless Multicast Forwarding.
                   wlVirtualSsid 1.3.6.1.4.1.5504.2.5.46.1.2.1.6 octet string read-write
Configure the Primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to the virtual wireless interfaces.
                   wlVirtualBssMacAddr 1.3.6.1.4.1.5504.2.5.46.1.2.1.7 macaddress read-only
MAC Address assigned to the primary SSID.
                   wlVirtualCountryCode 1.3.6.1.4.1.5504.2.5.46.1.2.1.8 wlcountrycodes read-only
Two character country code. The country code is automatically configured based upon the model number of the unit. All countries with 100mW EIRP maximum transmit power use the United Kingdom country code. North American models may use the maximum transmit power of 300mW EIRP.
                   wlVirtualMaxClients 1.3.6.1.4.1.5504.2.5.46.1.2.1.9 unsigned32 read-write
Maximum number of client devices that may be simultaneously connected to this SSID. The maximum clients value assigned to each access points must not exceed the global maximum clients value.
                   wlVirtualEnable 1.3.6.1.4.1.5504.2.5.46.1.2.1.10 truthvalue read-write
Enable or disable a single Wireless Virtual LAN Interface
           wlSecurityTable 1.3.6.1.4.1.5504.2.5.46.1.3 no-access
Table of Wireless Security Configuration, Status and Statistics objects for virtual LAN interfaces.
               wlSecurityEntry 1.3.6.1.4.1.5504.2.5.46.1.3.1 no-access
Table of entries, per virtual LAN interface, of Wireless Security objects.
                   wlSecuritySsid 1.3.6.1.4.1.5504.2.5.46.1.3.1.1 octet string read-only
The primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to this virtual wireless interface.
                   wlSecurityWps 1.3.6.1.4.1.5504.2.5.46.1.3.1.2 truthvalue read-only
Enable or disable WiFi Protected Setup (WPS) security method. If WPS is disabled, the network authentication method, the data encryption, and network key should also be configured in order to authenticate to this wireless network.
                   wlSecurityAuthMode 1.3.6.1.4.1.5504.2.5.46.1.3.1.3 wlauthenticationmodes read-write
Configure the network authentication method: mode8011x(1), open(2), shared(3), wpa(4), wpa2(5), wpaPsk(6), wpa2Psk(7), mixedWpa2Wpa(8), mixedWpa2WpaPsk(9)
                   wlSecurityWpaPsk 1.3.6.1.4.1.5504.2.5.46.1.3.1.4 octet string read-write
WPA/WPAI Passphrase. This field cannot contain a SPACE and is returned as a string of asterisks.
                   wlSecurityWpaGTKRekey 1.3.6.1.4.1.5504.2.5.46.1.3.1.5 unsigned32 read-write
WPA Group Rekey Interval.
                   wlSecurityWpaMode 1.3.6.1.4.1.5504.2.5.46.1.3.1.6 wlwpamodes read-write
WPA/WAPI Encryption mode: tkip(1), aes(2), tkipAes(3)
                   wlSecurityWepStatus 1.3.6.1.4.1.5504.2.5.46.1.3.1.7 wlwepmodes read-write
Status of Wireless Encryption Protocol (WEP) encryption: disabled(1) enabled(2)
                   wlSecurityRadiusServerIP 1.3.6.1.4.1.5504.2.5.46.1.3.1.8 ipaddress read-write
IP address of the Remote Authentication Dial In User Server (RADIUS) used for 802.1x authentication.
                   wlSecurityRadiusPort 1.3.6.1.4.1.5504.2.5.46.1.3.1.9 unsigned32 read-write
UDP port to use for accessing the Remote Authentication Dial In User Server (RADIUS).
                   wlSecurityRadiusKey 1.3.6.1.4.1.5504.2.5.46.1.3.1.10 octet string read-write
Remote Authentication Dial In User Server (RADIUS) authentication key. This field cannot contain a SPACE and is returned as a string of asterisks.
                   wlSecurityWepKey 1.3.6.1.4.1.5504.2.5.46.1.3.1.11 wlsecuritykeycodes read-write
Security encryption strength: bit64(1) bit128(2)
                   wlSecurityCurrentWepKeyIndex64 1.3.6.1.4.1.5504.2.5.46.1.3.1.12 unsigned32 read-write
Index into array of 64-bit encryption keys.
                   wlSecurityCurrentWepKeyIndex128 1.3.6.1.4.1.5504.2.5.46.1.3.1.13 unsigned32 read-write
Index into array of 128-bit encryption keys.
                   wlSecurityWep64Key1 1.3.6.1.4.1.5504.2.5.46.1.3.1.14 octet string read-write
WEP 64-bit encryption key 1 string, which must consist of 5 ASCII characters or 10 hexadecimal digits.
                   wlSecurityWep64Key2 1.3.6.1.4.1.5504.2.5.46.1.3.1.15 octet string read-write
WEP 64-bit encryption key 2 string, which must consist of 5 ASCII characters or 10 hexadecimal digits.
                   wlSecurityWep64Key3 1.3.6.1.4.1.5504.2.5.46.1.3.1.16 octet string read-write
WEP 64-bit encryption key 3 string, which must consist of 5 ASCII characters or 10 hexadecimal digits.
                   wlSecurityWep64Key4 1.3.6.1.4.1.5504.2.5.46.1.3.1.17 octet string read-write
WEP 64-bit encryption key 4 string, which must consist of 5 ASCII characters or 10 hexadecimal digits.
                   wlSecurityWep128Key1 1.3.6.1.4.1.5504.2.5.46.1.3.1.18 octet string read-write
WEP 128-bit encryption key 1 string, which must consist of 13 ASCII characters or 26 hexadecimal digits.
                   wlSecurityWep128Key2 1.3.6.1.4.1.5504.2.5.46.1.3.1.19 octet string read-write
WEP 128-bit encryption key 2 string, which must consist of 13 ASCII characters or 26 hexadecimal digits.
                   wlSecurityWep128Key3 1.3.6.1.4.1.5504.2.5.46.1.3.1.20 octet string read-write
WEP 128-bit encryption key 3 string, which must consist of 13 ASCII characters or 26 hexadecimal digits.
                   wlSecurityWep128Key4 1.3.6.1.4.1.5504.2.5.46.1.3.1.21 octet string read-write
WEP 128-bit encryption key 4 string, which must consist of 13 ASCII characters or 26 hexadecimal digits.
                   wlSecurityWpa2Preauth 1.3.6.1.4.1.5504.2.5.46.1.3.1.22 truthvalue read-write
Enable or disable WPA2 pre-authentication.
                   wlSecurityWpa2NetReauth 1.3.6.1.4.1.5504.2.5.46.1.3.1.23 unsigned32 read-write
Configure the WPA2 network re-authentication time, in seconds.
                   wlSecurityMACFilterMode 1.3.6.1.4.1.5504.2.5.46.1.3.1.24 wlmacfiltermodes read-write
Configure the MAC Filter mode. The MAC Filter rules defined in the wlMACFilterTable will be ignored when this object is set to disable(3).
           wlMACFilterTable 1.3.6.1.4.1.5504.2.5.46.1.4 no-access
Table of Wireless MAC filter rules for a virtual wireless interface. The MAC Filter table contains a list of MAC addresses for devices that are permitted to connect, or prevented from connecting to the wireless service.
               wlMACFilterEntry 1.3.6.1.4.1.5504.2.5.46.1.4.1 no-access
Entries in the Wireless MAC filter rules for a virtual wireless interface.
                   wlMACFilterIndex 1.3.6.1.4.1.5504.2.5.46.1.4.1.1 unsigned32 no-access
The Wireless MAC filter table index.
                   wlMACFilterSsid 1.3.6.1.4.1.5504.2.5.46.1.4.1.2 octet string read-only
The primary SSID assigned to the wl0 interface, or the Guest SSIDs assigned to this virtual wireless interface.
                   wlMACFilterMacAddr 1.3.6.1.4.1.5504.2.5.46.1.4.1.3 macaddress read-only
The MAC address which to apply to the filter rule.
                   wlMACFilterIfName 1.3.6.1.4.1.5504.2.5.46.1.4.1.4 octet string read-only
The virtual interface name to which this rule applies.
                   wlMACFilterRowStatus 1.3.6.1.4.1.5504.2.5.46.1.4.1.5 zhonerowstatus read-only
The SNMP RowStatus of the current row. When creating a new MAC Filter entry for a virtual wireless interface, only the MAC Address must be specified. The wlVirtualIndex will be used to determine the SSID and the filter mode to apply.
           wlStaticWdsMACAddrTable 1.3.6.1.4.1.5504.2.5.46.1.5 no-access
Table of statically configured Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled.
               wlStaticWdsMACAddrEntry 1.3.6.1.4.1.5504.2.5.46.1.5.1 no-access
Table of statically configured Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled.
                   wlStaticWdsMACIndex 1.3.6.1.4.1.5504.2.5.46.1.5.1.1 unsigned32 no-access
The index into the static WDS Remote MAC Address table for a wireless LAN interface.
                   wlStaticWdsRemoteMACAddr 1.3.6.1.4.1.5504.2.5.46.1.5.1.2 macaddress read-write
The MAC address that is permitted WDS bridge access to the wireless LAN interface.
           wlScanWdsMACAddrTable 1.3.6.1.4.1.5504.2.5.46.1.6 no-access
Table of scanned Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled.
               wlScanWdsMACAddrEntry 1.3.6.1.4.1.5504.2.5.46.1.6.1 no-access
Table of scanned Remote MAC Addresses which are permitted to bridge to the wireless LAN interfaces when the Bridge restriction mode is enabled.
                   wlScanWdsMACIndex 1.3.6.1.4.1.5504.2.5.46.1.6.1.1 unsigned32 no-access
The index into the WDS scanned table of Remote MAC Addresses that may access a wireless LAN interface.
                   wlScanWdsRemoteMACAddr 1.3.6.1.4.1.5504.2.5.46.1.6.1.2 macaddress read-only
The MAC address previously scanned that is permitted WDS bridge access to the wireless LAN interface.
           wlAuthStationsTable 1.3.6.1.4.1.5504.2.5.46.1.7 no-access
Table of authenicated wireless stations and their status information.
               wlAuthStationsEntry 1.3.6.1.4.1.5504.2.5.46.1.7.1 no-access
Table of authenicated wireless stations and their status information.
                   wlAuthStationIndex 1.3.6.1.4.1.5504.2.5.46.1.7.1.1 unsigned32 no-access
The index into the Authentication Stations table.
                   wlAuthStationMACAddr 1.3.6.1.4.1.5504.2.5.46.1.7.1.2 macaddress read-only
The MAC address of the authenticated station.
                   wlAuthStationAssociationStatus 1.3.6.1.4.1.5504.2.5.46.1.7.1.3 truthvalue read-only
True if the station has been associated.
                   wlAuthStationAuthorizationStatus 1.3.6.1.4.1.5504.2.5.46.1.7.1.4 truthvalue read-only
True if the station has been authorized.
                   wlAuthStationSSID 1.3.6.1.4.1.5504.2.5.46.1.7.1.5 octet string read-only
SSID with which the station has authenticated.
                   wlAuthStationInterface 1.3.6.1.4.1.5504.2.5.46.1.7.1.6 octet string read-only
Interface through which the station has authenticated.
       zhnWirelessConformance 1.3.6.1.4.1.5504.2.5.46.2
           zhnWirelessGroups 1.3.6.1.4.1.5504.2.5.46.2.1
               zhnWlBaseCfgGroup 1.3.6.1.4.1.5504.2.5.46.2.1.1
A collection of Zhone Wireless objects that describe the WLAN adapter basic configuration and status information.
               zhnWlVirtualCfgGroup 1.3.6.1.4.1.5504.2.5.46.2.1.2
A collection of Zhone Wireless objects that describe the WLAN virtual interface configuration and status information.
               zhnWlSecurityGroup 1.3.6.1.4.1.5504.2.5.46.2.1.3
A collection of Zhone Wireless objects that describe the WLAN virtual interface security information.
               zhnWlMACFilterGroup 1.3.6.1.4.1.5504.2.5.46.2.1.4
A collection of Zhone Wireless objects that describe the WLAN MAC filter rules.
               zhnWlStaticWdsMACAddrGroup 1.3.6.1.4.1.5504.2.5.46.2.1.5
A collection of Zhone Wireless objects that describe the WLAN statically configured WDS MAC addresses.
               zhnWlScanWdsMACAddrGroup 1.3.6.1.4.1.5504.2.5.46.2.1.6
A collection of Zhone Wireless objects that describe the WLAN WDS Scanned MAC addresses.
               zhnWlAuthStationsGroup 1.3.6.1.4.1.5504.2.5.46.2.1.7
A collection of Zhone Wireless objects that indentify the stations that have authenticated with the Access Point.
           zhnWirelessCompliances 1.3.6.1.4.1.5504.2.5.46.2.2
               zhnWirelessCompliance 1.3.6.1.4.1.5504.2.5.46.2.2.1
The Compliance statement for SNMP entities which manage the Zhone CPE Wireless Configuration, Status and Statistics Information