XXX-MIB: View SNMP OID List / Download MIB
VENDOR: NATIONAL CENTER FOR SOFTWARE TECHNOLOGY (INDIA)
| Home | MIB: XXX-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| company | 1.3.6.1.4.1.6688 |
Media Converter NMS SNMP mib file |
||
| ipProduct | 1.3.6.1.4.1.6688.1 |
IP product line |
||
| height2HU | 1.3.6.1.4.1.6688.1.1 | |||
| systemMIB | 1.3.6.1.4.1.6688.1.1.1 | |||
| shelfNum | 1.3.6.1.4.1.6688.1.1.1.1 | integer | read-only |
The number of shelf in current system |
| shelfTable | 1.3.6.1.4.1.6688.1.1.1.2 | no-access |
Shelf table |
|
| 1.3.6.1.4.1.6688.1.1.1.2.1 | no-access |
Shelf entry definition |
||
| shelfName | 1.3.6.1.4.1.6688.1.1.1.2.1.1 | integer | read-only |
Shelf name Enumeration: 'slave1': 2, 'master': 1, 'slave3': 4, 'slave2': 3. |
| psuA | 1.3.6.1.4.1.6688.1.1.1.2.1.2 | integer | read-only |
The status fan A of current shelf Enumeration: 'on': 1, 'nc': 3, 'off': 2. |
| psuB | 1.3.6.1.4.1.6688.1.1.1.2.1.3 | integer | read-only |
The status psu B of current shelf Enumeration: 'on': 1, 'nc': 3, 'off': 2. |
| volA | 1.3.6.1.4.1.6688.1.1.1.2.1.4 | integer | read-only |
The voltage status of psuA of current shelf Enumeration: 'nc': 3, 'abnormal': 2, 'normal': 1. |
| volB | 1.3.6.1.4.1.6688.1.1.1.2.1.5 | integer | read-only |
The voltage status of psuB of current shelf Enumeration: 'nc': 3, 'abnormal': 2, 'normal': 1. |
| fan | 1.3.6.1.4.1.6688.1.1.1.2.1.6 | integer | read-only |
The status fan A of current shelf Enumeration: 'on': 1, 'nc': 3, 'off': 2. |
| temperature | 1.3.6.1.4.1.6688.1.1.1.2.1.7 | integer | read-only |
The temperature status of current shelf |
| coCardNum | 1.3.6.1.4.1.6688.1.1.1.2.1.8 | integer | read-only |
The number of center card inserting of current shelf |
| rmtCardNum | 1.3.6.1.4.1.6688.1.1.1.2.1.9 | integer | read-only |
The number of remote card inserting of current shelf |
| slotObjects | 1.3.6.1.4.1.6688.1.1.1.3 | |||
| slotTable | 1.3.6.1.4.1.6688.1.1.1.3.1 | no-access |
Sparse table containing one entry for each slot in exist chassis in the system, indexed by shelfIdx and slotIdx. |
|
| 1.3.6.1.4.1.6688.1.1.1.3.1.1 | no-access |
in this table ,user can find the converter module's type inserted in the system's slot.then you can get the detail information about the specified type in the cardObjects table |
||
| shelfIdx | 1.3.6.1.4.1.6688.1.1.1.3.1.1.1 | integer | read-only |
Chassis index - 1 = master management module, 2-4 = slave management module Enumeration: 'slave1': 2, 'master': 1, 'slave3': 4, 'slave2': 3. |
| slotIdx | 1.3.6.1.4.1.6688.1.1.1.3.1.1.2 | integer | read-only |
chassis's slot,whitch is a index in this table Enumeration: 'slot02': 2, 'slot03': 3, 'slot13': 13, 'slot01': 1, 'slot06': 6, 'slot07': 7, 'slot04': 4, 'slot05': 5, 'slot17': 17, 'slot08': 8, 'slot09': 9, 'slot10': 10, 'slot11': 11, 'slot12': 12, 'slot15': 15, 'slot16': 16, 'slot14': 14. |
| coCardType | 1.3.6.1.4.1.6688.1.1.1.3.1.1.3 | integer | read-only |
local card's type inserted in the chassis Enumeration: 'mc-e1t1': 26, 'not-support': 102, 'mc-40g-oeo': 12, 'mc-2-5g': 11, 'mc-4-25g-oeo': 5, 'mc-10g-oeo-2r': 24, 'mc-2-5g-t': 13, 'mc-1g-e2o': 3, 'mc-1g-e2o-backup': 17, 'mc-2-5g-f': 14, 'mc-qca8334': 25, 'fr600f-ms': 101, 'mc-1g-o2o': 4, 'mc-2-5g-mux-f': 16, 'mc-2-5g-mux-t': 15, 'mc-cwdm-8': 23, 'mc-10g-oeo-1r': 10, 'fr600f-mm': 100, 'mc-10g-oee': 8, 'mc-FAN': 9, 'mc-e1-1sfp': 18, 'ip113s': 1, 'mc-1g-o2o-backup': 21, 'mc-cwdm-4': 22, 'no-card': 0, 'mc-e1-2sfp': 19, 'mc-10g-oeo': 7, 'ip113f': 2, 'mc-100m-sfp': 20, 'mc-ip175d': 6. |
| coCardDesc | 1.3.6.1.4.1.6688.1.1.1.3.1.1.4 | displaystring | read-write |
local card's description |
| rmtCardType | 1.3.6.1.4.1.6688.1.1.1.3.1.1.5 | integer | read-only |
remote card's type connect with the local converter Enumeration: 'fr600f-ms': 101, 'not-support': 102, 'mc-ip175dr': 6, 'mc-2-5g-fr': 14, 'mc-e1-2sfpr': 19, 'mc-cwdmr-4': 22, 'mc-10g-oeor': 7, 'ip113sr': 1, 'mc-cwdmr-8': 23, 'mc-2-5g-mux-fr': 16, 'mc-1g-e2o': 3, 'mc-e1-1sfpr': 18, 'mc-10g-oeer': 8, 'mc-4-25g-oeor': 5, 'mc-2-5g-tr': 13, 'mc-1g-e2o-backupr': 17, 'mc-1g-o2o': 4, 'mc-1g-o2o-backupr': 21, 'mc-100m-sfpr': 20, 'mc-10g-oeo-1rr': 10, 'mc-FANr': 9, 'fr600f-mm': 100, 'mc-2-5gr': 11, 'mc-e1t1r': 26, 'mc-qca8334r': 25, 'no-card': 0, 'ip113f': 2, 'mc-2-5g-mux-tr': 15, 'mc-10g-oeo-2rr': 24, 'mc-40g-oeor': 12. |
| rmtCardDesc | 1.3.6.1.4.1.6688.1.1.1.3.1.1.6 | displaystring | read-write |
remote card's description |
| cardObjects | 1.3.6.1.4.1.6688.1.1.1.4 | |||
| nmuObjects | 1.3.6.1.4.1.6688.1.1.1.4.1 | |||
| nmuConfig | 1.3.6.1.4.1.6688.1.1.1.4.1.1 | |||
| nmuType | 1.3.6.1.4.1.6688.1.1.1.4.1.1.1 | integer | read-only |
The type of NMU (network management unit) Enumeration: 'fr600f-ms': 101, 'not-support': 102, 'fr600f-mm': 100. |
| ipaddr | 1.3.6.1.4.1.6688.1.1.1.4.1.1.2 | ipaddress | read-only |
The ethernet IP address of NMU (network management unit) |
| subnet | 1.3.6.1.4.1.6688.1.1.1.4.1.1.3 | ipaddress | read-only |
The etherent mask address of NMU (network management unit) |
| gateway | 1.3.6.1.4.1.6688.1.1.1.4.1.1.4 | ipaddress | read-only |
The ethernet gateway address of NMU (network management unit) |
| sysContact | 1.3.6.1.4.1.6688.1.1.1.4.1.1.5 | displaystring | read-write |
Mirror of the system.sysContact.0 |
| sysName | 1.3.6.1.4.1.6688.1.1.1.4.1.1.6 | displaystring | read-write |
Mirror of the system.sysName.0 |
| sysLocation | 1.3.6.1.4.1.6688.1.1.1.4.1.1.7 | displaystring | read-write |
Mirror of the system.sysLocation.0 |
| trapHost1 | 1.3.6.1.4.1.6688.1.1.1.4.1.1.8 | ipaddress | read-write |
The first host's IP address used to receive trap messages, when set 0 it simply delete this entry. This applies to the trap host 2~4 below as well. |
| trapHost2 | 1.3.6.1.4.1.6688.1.1.1.4.1.1.9 | ipaddress | read-write |
The second host's IP address used to receive trap messages |
| trapHost3 | 1.3.6.1.4.1.6688.1.1.1.4.1.1.10 | ipaddress | read-write |
The third host's IP address used to receive trap messages |
| trapHost4 | 1.3.6.1.4.1.6688.1.1.1.4.1.1.11 | ipaddress | read-write |
The fourth host's IP address used to receive trap messages |
| mcCmObjects | 1.3.6.1.4.1.6688.1.1.1.4.2 | |||
| mcCmTable | 1.3.6.1.4.1.6688.1.1.1.4.2.1 | no-access |
MC Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.1.1 | no-access |
MC Configuration entry definition |
||
| mcShelfIdx | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.1 | integer | read-only |
Shelf index Enumeration: 'slave1': 2, 'master': 1, 'slave3': 4, 'slave2': 3. |
| mcCardIdx | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.2 | integer | read-only |
Card index Enumeration: 'card10': 10, 'card08': 8, 'card09': 9, 'card16': 16, 'card04': 4, 'card05': 5, 'card06': 6, 'card07': 7, 'card01': 1, 'card02': 2, 'card03': 3, 'card13': 13, 'card15': 15, 'card12': 12, 'card14': 14, 'card11': 11. |
| mcType | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.3 | integer | read-only |
Center card's type Enumeration: 'mc-e1t1': 26, 'mc-40g-oeo': 12, 'mc-2-5g': 11, 'mc-4-25g-oeo': 5, 'mc-10g-oeo-2r': 24, 'mc-2-5g-t': 13, 'mc-1g-e2o': 3, 'mc-1g-e2o-backup': 17, 'mc-2-5g-f': 14, 'mc-qca8334': 25, 'mc-1g-o2o': 4, 'mc-2-5g-mux-f': 16, 'mc-2-5g-mux-t': 15, 'mc-cwdm-8': 23, 'mc-10g-oeo-1r': 10, 'mc-10g-oee': 8, 'mc-FAN': 9, 'mc-e1-1sfp': 18, 'ip113s': 1, 'mc-1g-o2o-backup': 21, 'mc-cwdm-4': 22, 'no-card': 0, 'mc-e1-2sfp': 19, 'mc-10g-oeo': 7, 'ip113f': 2, 'mc-100m-sfp': 20, 'mc-ip175d': 6. |
| mcTransceiverMode | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.4 | integer | read-only |
Center card's optical transceiver mode. 100M card support bidi/duplex-fiber; 1G card support bidi/duplex-fiber/sfp. Once sfp is given, the following mcTransceiverDist should be ignored. Enumeration: 'not-support': 4, 'sfp': 3, 'bidi': 1, 'duplex-fiber': 2. |
| mcTransceiverDist | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.5 | integer | read-only |
Center card's optical transceiver distance, 1 means 550m for duplex-fiber mode in case of 1G card, otherwise it represents the real distance (unit of km). |
| mcPortState | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.6 | integer | read-write |
Center card's port status, locked or unlocked Enumeration: 'not-support': 3, 'locked': 1, 'unlocked': 2. |
| mcTransmitMode | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.7 | integer | read-write |
Center card's transmmit mode Enumeration: 'not-support': 3, 'store-forward': 2, 'cut-through': 1. |
| mcCurWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.8 | integer | read-only |
Center card's current work mode Enumeration: 'not-support': 7, 'm100-full': 2, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcCfgWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.9 | integer | read-write |
Center card's configurable work mode Enumeration: 'not-support': 7, 'm100-full': 2, 'mAuto': 1, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcLFPCfg | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.10 | integer | read-write |
Remote fault detect function, valid only on center MC card Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mcUpStream | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.11 | gauge32 | read-write |
Center card's up stream of MC |
| mcDownStream | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.12 | gauge32 | read-write |
Center card's down stream of MC |
| mcTxlink | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.13 | integer | read-only |
Center card's electrical port's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mcFxlink | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.14 | integer | read-only |
Center card's optical port's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mcHWLFP | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.15 | integer | read-only |
Center card's HW LFP, not applicable for 1G card Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mcHWTransmitMode | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.16 | integer | read-only |
Center card's HW transmit mode, not applicable for 1G card Enumeration: 'not-support': 3, 'store-forward': 2, 'cut-through': 1. |
| mcHWWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.17 | integer | read-only |
Center card's HW work mode, not applicable for 1G card Enumeration: 'not-support': 7, 'm100-full': 2, 'mAuto': 1, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcHWRmtCtrlMode | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.18 | integer | read-only |
Center card's HW remote control mode (only valid for local card). the disable mode indicates that all SET operations must be prohibited Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mcNtwSfpExist | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.19 | integer | read-only |
Center 1G card's Network SFP indication Enumeration: 'na': 3, 'not-support': 4, 'removed': 2, 'inserted': 1. |
| mcAccSfpExist | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.20 | integer | read-only |
Center 1G card's Access SFP indication, applicable only for O2O type Enumeration: 'na': 3, 'not-support': 4, 'removed': 2, 'inserted': 1. |
| mcUtility | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.21 | integer | read-write |
reset, default to factory, set to HW word, etc... Enumeration: 'reset': 2, 'default': 3, 'idle': 1, 'set2hw': 4, 'not-support': 5. |
| mcRmtDetect | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.22 | integer | read-only |
An identifier to indicate if there is a remote MC currently connecting to system or not Enumeration: 'yes': 1, 'no-remote': 0, 'not-support': 2. |
| mcRmtType | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.23 | integer | read-only |
Remote card's type Enumeration: 'no-card': 0, 'mc-2-5g-fr': 14, 'mc-e1-2sfpr': 19, 'mc-cwdmr-4': 22, 'mc-10g-oeor': 7, 'ip113sr': 1, 'mc-cwdmr-8': 23, 'mc-1g-e2or': 3, 'mc-1g-o2or': 4, 'mc-2-5g-mux-fr': 16, 'mc-e1-1sfpr': 18, 'mc-10g-oeer': 8, 'mc-4-25g-oeor': 5, 'mc-2-5g-tr': 13, 'mc-1g-e2o-backupr': 17, 'mc-1g-o2o-backupr': 21, 'mc-100m-sfpr': 20, 'mc-10g-oeo-1rr': 10, 'mc-FANr': 9, 'mc-2-5gr': 11, 'mc-e1t1r': 26, 'mc-qca8334r': 25, 'mc-ip175dr': 6, 'ip113f': 2, 'mc-2-5g-mux-tr': 15, 'mc-10g-oeo-2rr': 24, 'mc-40g-oeor': 12. |
| mcRmtTransmitMode | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.24 | integer | read-write |
Remote card's transmmit mode Enumeration: 'not-support': 3, 'no-card': 0, 'store-forward': 2, 'cut-through': 1. |
| mcRmtCurWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.25 | integer | read-only |
Remote card's current work mode Enumeration: 'not-support': 7, 'm100-full': 2, 'no-card': 0, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcRmtCfgWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.26 | integer | read-write |
Remote card's configurable work mode Enumeration: 'not-support': 7, 'm100-full': 2, 'mAuto': 1, 'no-card': 0, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcRmtLFP | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.27 | integer | read-write |
Remote card's LFP lamp state Enumeration: 'enable': 1, 'no-card': 0, 'not-support': 3, 'disable': 2. |
| mcRmtTxlink | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.28 | integer | read-only |
Remote card's electrial port status Enumeration: 'down': 2, 'not-support': 3, 'no-card': 0, 'up': 1. |
| mcRmtHWLFP | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.29 | integer | read-only |
Remote card's HW LFP, not applicable for 1G card Enumeration: 'enable': 1, 'no-card': 0, 'not-support': 3, 'disable': 2. |
| mcRmtHWTransmitMode | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.30 | integer | read-only |
Remote card's HW transmit mode, not applicable for 1G card Enumeration: 'not-support': 3, 'no-card': 0, 'store-forward': 2, 'cut-through': 1. |
| mcRmtHWWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.31 | integer | read-only |
Remote card's HW work mode, not applicable for 1G card Enumeration: 'not-support': 7, 'm100-full': 2, 'mAuto': 1, 'no-card': 0, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcRmtLoopback | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.32 | integer | read-write |
Remote card's HW Loopback state Enumeration: 'enable': 1, 'no-card': 0, 'not-support': 3, 'disable': 2. |
| mcRmtPwrDown | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.33 | integer | read-only |
Remote card's power down state Enumeration: 'powerdown': 1, 'no-card': 0, 'not-support': 3, 'normal': 2. |
| mcRmtAccSfpExist | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.34 | integer | read-only |
Remote 1G card's Access SFP indication, applicable only for O2O type Enumeration: 'na': 3, 'removed': 2, 'no-card': 0, 'inserted': 1, 'support': 4. |
| mcRmtUtility | 1.3.6.1.4.1.6688.1.1.1.4.2.1.1.35 | integer | read-write |
Rmote cards's reset, default to factory, set to HW word, etc... Enumeration: 'reset': 2, 'not-support': 5, 'set2hw': 4, 'default': 3, 'no-card': 0, 'idle': 1. |
| mcCm1gSpecificObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.2 | |||
| mcCm1gIpObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.2.1 | |||
| mcCm1gIpTable | 1.3.6.1.4.1.6688.1.1.1.4.2.2.1.1 | no-access |
MC 1G Ip address table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.2.1.1.1 | no-access |
MC 1G Ip address entry definition |
||
| mcLoOrRmtFg | 1.3.6.1.4.1.6688.1.1.1.4.2.2.1.1.1.1 | integer | read-only |
location index, local or remote Enumeration: 'remote': 2, 'local': 1. |
| mcIpAddr | 1.3.6.1.4.1.6688.1.1.1.4.2.2.1.1.1.2 | ipaddress | read-write |
The Ip address of the node |
| mcCm1gSfpObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2 | |||
| mcCm1gSfpTable | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1 | no-access |
MC 1G SFP table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1.1 | no-access |
MC 1G SFP entry definition |
||
| getSfpCmd | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1.1.1 | integer | read-write |
This command will get the updated sfp information. Please send this command prior to getting the following params, otherwise the history sfp information will be sent back. Enumeration: 'na': 0, 'local': 1, 'remote': 2. |
| sfpCompliance | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1.1.2 | integer | read-only |
SFP compliance (one byte) if 0 then the attributs of sfpTemperature/sfpTranPower/sfpRecvPower should be ignored |
| sfpConnector | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1.1.3 | integer | read-only |
SFP connector type (one byte) 0x01: SC 0x07: LC 0x22: RJ45 others: unsupported |
| sfpTransCode | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1.1.4 | integer | read-only |
SFP transceiver code (one byte) bit0: SingleMode bit1: Copper Module bit2: MultiMode bit3: MultiMode others: unsupported |
| sfpSmLength | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1.1.5 | integer | read-only |
SFP link length for SingleMode, units of km. (one byte) applicable only when sfpTransCode is SingleMode |
| sfpMmLength | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1.1.6 | integer | read-only |
SFP link length for MultiMode, units of 10m (one byte) applicable only when sfpTransCode is MultiMode |
| sfpCopperLength | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1.1.7 | integer | read-only |
SFP link length for Copper, units of m (one byte) applicable only when sfpConnector is RJ45 |
| sfpBrSpeed | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1.1.8 | integer | read-only |
SFP nominal signalling rate, units of 100Mbit/s (one byte) |
| sfpWavelength | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1.1.9 | integer | read-only |
SFP laser wavelength (one word) |
| sfpTemperature | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1.1.10 | integer | read-only |
SFP temperature (one type, signed) |
| sfpTranPower | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1.1.11 | integer | read-only |
SFP tx power (one type, signed) |
| sfpRecvPower | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1.1.12 | integer | read-only |
SFP rx power (one type, signed) |
| sfpVoltage | 1.3.6.1.4.1.6688.1.1.1.4.2.2.2.1.1.13 | integer | read-only |
SFP voltage, units of 0.1mV (one word) |
| mcCm1gAccSfpObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3 | |||
| mcCm1gAccSfpTable | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1 | no-access |
MC 1G Access SFP table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1.1 | no-access |
MC 1G Access SFP entry definition |
||
| getAccSfpCmd | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1.1.1 | integer | read-write |
This command will get the updated sfp information. Please send this command prior to getting the following params, otherwise the history sfp information will be sent back. Enumeration: 'na': 0, 'local': 1, 'remote': 2. |
| accsfpCompliance | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1.1.2 | integer | read-only |
SFP compliance (one byte) if 0 then the attributs of sfpTemperature/sfpTranPower/sfpRecvPower should be ignored |
| accsfpConnector | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1.1.3 | integer | read-only |
SFP connector type (one byte) 0x01: SC 0x07: LC 0x22: RJ45 others: unsupported |
| accsfpTransCode | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1.1.4 | integer | read-only |
SFP transceiver code (one byte) bit0: SingleMode bit2: MultiMode bit3: MultiMode others: unsupported |
| accsfpSmLength | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1.1.5 | integer | read-only |
SFP link length for SingleMode, units of km. (one byte) applicable only when sfpTransCode is SingleMode |
| accsfpMmLength | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1.1.6 | integer | read-only |
SFP link length for MultiMode, units of 10m (one byte) applicable only when sfpTransCode is MultiMode |
| accsfpCopperLength | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1.1.7 | integer | read-only |
SFP link length for Copper, units of m (one byte) applicable only when sfpConnector is RJ45 |
| accsfpBrSpeed | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1.1.8 | integer | read-only |
SFP nominal signalling rate, units of 100Mbit/s (one byte) |
| accsfpWavelength | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1.1.9 | integer | read-only |
SFP laser wavelength (one word) |
| accsfpTemperature | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1.1.10 | integer | read-only |
SFP temperature (one type, signed) |
| accsfpTranPower | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1.1.11 | integer | read-only |
SFP tx power (one type, signed) |
| accsfpRecvPower | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1.1.12 | integer | read-only |
SFP rx power (one type, signed) |
| accsfpVoltage | 1.3.6.1.4.1.6688.1.1.1.4.2.2.3.1.1.13 | integer | read-only |
SFP voltage, units of 0.1mV (one word) |
| mcIP175DObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.3 | |||
| mcIP175DCardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.3.1 | |||
| mcIP175DCardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.3.1.1 | no-access |
MC IP175D Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.3.1.1.1 | no-access |
MC Configuration entry definition |
||
| mcIP175DVlanMode | 1.3.6.1.4.1.6688.1.1.1.4.2.3.1.1.1.1 | integer | read-write |
Center card's vlan mode Enumeration: 'not-support': 4, 'mode1': 2, 'mode2': 3, 'Normal': 1. |
| mcIP175DPortObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.3.2 | |||
| mcIP175DPortTable | 1.3.6.1.4.1.6688.1.1.1.4.2.3.2.1 | no-access |
MC IP175D Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.3.2.1.1 | no-access |
MC Configuration entry definition |
||
| mcIP175DPortIdx | 1.3.6.1.4.1.6688.1.1.1.4.2.3.2.1.1.1 | integer | read-only |
Port index Enumeration: 'port2': 2, 'port1': 1. |
| mcIP175DCurWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.3.2.1.1.2 | integer | read-only |
Center card's port current work mode Enumeration: 'not-support': 7, 'm100-full': 2, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcIP175DCfgWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.3.2.1.1.3 | integer | read-write |
Center card's port configurable work mode Enumeration: 'not-support': 7, 'm100-full': 2, 'mAuto': 1, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcIP175DUpStream | 1.3.6.1.4.1.6688.1.1.1.4.2.3.2.1.1.4 | gauge32 | read-write |
Center card's port up stream of MC |
| mcIP175DDownStream | 1.3.6.1.4.1.6688.1.1.1.4.2.3.2.1.1.5 | gauge32 | read-write |
Center card's port down stream of MC |
| mcIP175DTxlink | 1.3.6.1.4.1.6688.1.1.1.4.2.3.2.1.1.6 | integer | read-only |
Center card's port 1 electrical port's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mcIP175DRmtCurWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.3.2.1.1.7 | integer | read-only |
Remote card's port 1 current work mode Enumeration: 'not-support': 7, 'm100-full': 2, 'no-card': 0, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcIP175DRmtCfgWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.3.2.1.1.8 | integer | read-write |
Remote card's port1 configurable work mode Enumeration: 'not-support': 7, 'm100-full': 2, 'mAuto': 1, 'no-card': 0, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcIP175DRmtTxlink | 1.3.6.1.4.1.6688.1.1.1.4.2.3.2.1.1.9 | integer | read-only |
Remote card's port electrial port status Enumeration: 'down': 2, 'not-support': 3, 'no-card': 0, 'up': 1. |
| mc4_25G_OEOObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.4 | |||
| mc4_25G_OEOCardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1 | |||
| mc4_25G_OEOCardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1 | no-access |
MC 4.25G OEO Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1 | no-access |
MC Configuration entry definition |
||
| mc4_25G_OEOCurSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.1 | integer | read-only |
Center card's config speed mode Enumeration: 'not-support': 11, 'Infini': 1, 'STM1': 4, 'STM4': 3, 'FCx4': 5, 'GE': 8, 'FCx1': 7, 'FE': 9, 'ESCOM': 10, 'FCx2': 6, 'STM16': 2. |
| mc4_25G_OEOCfgSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.2 | integer | read-write |
Center card's current speed mode Enumeration: 'not-support': 11, 'Infini': 1, 'STM1': 4, 'STM4': 3, 'FCx4': 5, 'GE': 8, 'FCx1': 7, 'FE': 9, 'ESCOM': 10, 'FCx2': 6, 'STM16': 2. |
| mc4_25G_OEOLoopback | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.3 | integer | read-write |
card's Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mc4_25G_OEOWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.4 | integer | read-write |
card's Work Mode Enumeration: 'not-support': 3, 'repeater': 1, 'retimer': 2. |
| mc4_25G_OEONtwPD | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.5 | integer | read-only |
Center card's network side PD status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc4_25G_OEOAccPD | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.6 | integer | read-only |
Center card's access side PD status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc4_25G_OEOHWSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.7 | integer | read-only |
Center card's HW speed mode Enumeration: 'not-support': 11, 'Infini': 1, 'STM1': 4, 'STM4': 3, 'FCx4': 5, 'GE': 8, 'FCx1': 7, 'FE': 9, 'ESCOM': 10, 'FCx2': 6, 'STM16': 2. |
| mc4_25G_OEOHWLoopback | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.8 | integer | read-only |
card's HW Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mc4_25G_OEOHWWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.9 | integer | read-only |
card's HW Work Mode Enumeration: 'not-support': 3, 'repeater': 1, 'retimer': 2. |
| mc4_25G_OEO_Test_Lock | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.10 | integer | read-only |
test result lock or unlock Enumeration: 'Lock': 1, 'Unlock': 2. |
| mc4_25G_OEO_Test_Error_Counter | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.11 | integer | read-only |
test result error counter |
| mc4_25G_OEO_Test_Continue_Time | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.12 | integer | read-only |
test continue time unit is second |
| mc4_25G_OEO_Test_Result | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.13 | integer | read-only |
test result Enumeration: 'Error': 2, 'Pass': 1. |
| mc4_25G_OEO_Start_Test | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.14 | integer | read-write |
start test and stop test Enumeration: 'Start': 1, 'Stop': 2. |
| mc4_25G_OEO_Get_Test_Rst | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.15 | integer | read-write |
get test result Enumeration: 'Get': 1. |
| mcRmt4_25G_OEOCurSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.16 | integer | read-only |
Center card's config speed mode Enumeration: 'not-support': 11, 'Infini': 1, 'STM1': 4, 'STM4': 3, 'FCx4': 5, 'GE': 8, 'FCx1': 7, 'FE': 9, 'ESCOM': 10, 'FCx2': 6, 'STM16': 2. |
| mcRmt4_25G_OEOCfgSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.17 | integer | read-write |
Center card's current speed mode Enumeration: 'not-support': 11, 'Infini': 1, 'STM1': 4, 'STM4': 3, 'FCx4': 5, 'GE': 8, 'FCx1': 7, 'FE': 9, 'ESCOM': 10, 'FCx2': 6, 'STM16': 2. |
| mcRmt4_25G_OEOLoopback | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.18 | integer | read-write |
card's Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mcRmt4_25G_OEOWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.19 | integer | read-write |
card's Work Mode Enumeration: 'not-support': 3, 'repeater': 1, 'retimer': 2. |
| mcRmt4_25G_OEOHWSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.20 | integer | read-only |
Center card's HW speed mode Enumeration: 'not-support': 11, 'Infini': 1, 'STM1': 4, 'STM4': 3, 'FCx4': 5, 'GE': 8, 'FCx1': 7, 'FE': 9, 'ESCOM': 10, 'FCx2': 6, 'STM16': 2. |
| mcRmt4_25G_OEOHWLoopback | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.21 | integer | read-only |
card's HW Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mcRmt4_25G_OEOHWWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.4.1.1.1.22 | integer | read-only |
card's HW Work Mode Enumeration: 'not-support': 3, 'repeater': 1, 'retimer': 2. |
| mc10G_OEOObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.5 | |||
| mc10G_OEOCardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1 | |||
| mc10G_OEOCardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1 | no-access |
MC 10G OEO Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1 | no-access |
MC Configuration entry definition |
||
| mc10G_OEOCurSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.1 | integer | read-only |
Center card's current speed mode 10G LAN(10.3125G) and 10G WAN(9.95328G) Enumeration: 'WAN': 2, 'LAN': 1, 'not-support': 4. |
| mc10G_OEOCfgSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.2 | integer | read-write |
Center card's config speed mode 10G LAN(10.3125G) and 10G WAN(9.95328G) Enumeration: 'WAN': 2, 'LAN': 1, 'not-support': 4. |
| mc10G_OEOLoopback | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.3 | integer | read-write |
card's Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mc10G_OEOSFP1 | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.4 | integer | read-only |
Center card's SFP1 link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc10G_OEOSFP2 | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.5 | integer | read-only |
Center card's SFP2 link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc10G_OEOHWSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.6 | integer | read-only |
Center card's HW speed mode Enumeration: 'WAN': 2, 'LAN': 1, 'not-support': 4. |
| mc10G_OEOHWLoopback | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.7 | integer | read-only |
card's HW Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mc10G_OEO_Test_Lock | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.8 | integer | read-only |
test result lock or unlock Enumeration: 'Lock': 1, 'Unlock': 2. |
| mc10G_OEO_Test_Error_Counter | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.9 | integer | read-only |
test result error counter |
| mc10G_OEO_Test_Continue_Time | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.10 | integer | read-only |
test continue time unit is second |
| mc10G_OEO_Test_Result | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.11 | integer | read-only |
test result Enumeration: 'Error': 2, 'Pass': 1. |
| mc10G_OEO_Start_Test | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.12 | integer | read-write |
start test and stop test Enumeration: 'Start': 1, 'Stop': 2. |
| mc10G_OEO_Get_Test_Rst | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.13 | integer | read-write |
get test result Enumeration: 'Get': 1. |
| mcRmt10G_OEOCurSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.14 | integer | read-only |
Center card's current speed mode 10G LAN(10.3125G) and 10G WAN(9.95328G) Enumeration: 'WAN': 2, 'LAN': 1, 'not-support': 4. |
| mcRmt10G_OEOCfgSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.15 | integer | read-write |
Center card's config speed mode 10G LAN(10.3125G) and 10G WAN(9.95328G) Enumeration: 'WAN': 2, 'LAN': 1, 'not-support': 4. |
| mcRmt10G_OEOLoopback | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.16 | integer | read-write |
card's Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mcRmt10G_OEOHWSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.17 | integer | read-only |
Center card's HW speed mode 10G LAN(10.3125G) and 10G WAN(9.95328G) Enumeration: 'WAN': 2, 'LAN': 1, 'not-support': 4. |
| mcRmt10G_OEOHWLoopback | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.18 | integer | read-only |
card's HW Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mcRmt10G_OEOSFP1 | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.19 | integer | read-only |
card's SFP1 link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc10G_OEO_accType | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.20 | integer | read-only |
Enumeration: 'XFP': 1, 'unknow': 3, 'SFP': 2. |
| mc10G_OEO_ntwType | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.21 | integer | read-only |
Enumeration: 'XFP': 1, 'unknow': 3, 'SFP': 2. |
| mcRmt10G_OEO_accType | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.22 | integer | read-only |
Enumeration: 'XFP': 1, 'unknow': 3, 'SFP': 2. |
| mcRmt10G_OEO_ntwType | 1.3.6.1.4.1.6688.1.1.1.4.2.5.1.1.1.23 | integer | read-only |
Enumeration: 'XFP': 1, 'unknow': 3, 'SFP': 2. |
| mc10G_OEEObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.6 | |||
| mc10G_OEECardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.6.1 | |||
| mc10G_OEECardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.6.1.1 | no-access |
MC 10G OEE Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.6.1.1.1 | no-access |
MC Configuration entry definition |
||
| mc10G_OEETxlink | 1.3.6.1.4.1.6688.1.1.1.4.2.6.1.1.1.1 | integer | read-only |
Center card's electrical port's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc10G_OEEFxlink | 1.3.6.1.4.1.6688.1.1.1.4.2.6.1.1.1.2 | integer | read-only |
Center card's optical port's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc10G_OEECurSpd | 1.3.6.1.4.1.6688.1.1.1.4.2.6.1.1.1.3 | integer | read-only |
Local card's current spd Enumeration: 'm10G-Slave': 8, 'not-support': 9, 'm10G-Master': 7, 'm100-full': 2, 'mAuto': 1, 'no-card': 0, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mc10G_OEELoopMode | 1.3.6.1.4.1.6688.1.1.1.4.2.6.1.1.1.4 | integer | read-write |
card's Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mc10G_OEESpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.6.1.1.1.5 | integer | read-write |
card's speed mode Enumeration: 'auto': 1, 'm10G-Master': 7, 'm10G-Slave': 8. |
| mc10G_OEEHWLoopback | 1.3.6.1.4.1.6688.1.1.1.4.2.6.1.1.1.6 | integer | read-only |
card's Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mc10G_OEE_ntwType | 1.3.6.1.4.1.6688.1.1.1.4.2.6.1.1.1.7 | integer | read-only |
Enumeration: 'XFP': 1, 'unknow': 3, 'SFP': 2. |
| mc10G_OEE_checkResult | 1.3.6.1.4.1.6688.1.1.1.4.2.6.1.1.1.8 | integer | read-only |
test result |
| mcFanObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.7 | |||
| mcFanCardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.7.1 | |||
| mcFanCardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.7.1.1 | no-access |
MC fan card table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.7.1.1.1 | no-access |
MC Configuration entry definition |
||
| mcFanStatus | 1.3.6.1.4.1.6688.1.1.1.4.2.7.1.1.1.1 | integer | read-only |
Center card's fan status Enumeration: 'not-support': 3, 'Abnormal': 2, 'Normal': 1. |
| mc40G_OEOObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.8 | |||
| mc40G_OEOCardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1 | |||
| mc40G_OEOCardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1 | no-access |
MC 40G OEO Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1 | no-access |
MC Configuration entry definition |
||
| mc40G_OEOQsfp1Lane1_link | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.1 | integer | read-only |
Center card's Qsfp1 Lane1 link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc40G_OEOQsfp1Lane2_link | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.2 | integer | read-only |
Center card's Qsfp1 Lane2 link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc40G_OEOQsfp1Lane3_link | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.3 | integer | read-only |
Center card's Qsfp1 Lane3 link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc40G_OEOQsfp1Lane4_link | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.4 | integer | read-only |
Center card's Qsfp1 Lane4 link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc40G_OEOQsfp2Lane1_link | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.5 | integer | read-only |
Center card's Qsfp2 Lane1 link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc40G_OEOQsfp2Lane2_link | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.6 | integer | read-only |
Center card's Qsfp2 Lane2 link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc40G_OEOQsfp2Lane3_link | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.7 | integer | read-only |
Center card's Qsfp2 Lane3 link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc40G_OEOQsfp2Lane4_link | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.8 | integer | read-only |
Center card's Qsfp2 Lane4 link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc40G_OEOLane1LoopMode | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.9 | integer | read-write |
card's Lane1 Loopback state Enumeration: 'not-support': 4, 'disable': 3, 'host-side-enable': 2, 'line-side-enable': 1. |
| mc40G_OEOLane2LoopMode | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.10 | integer | read-write |
card's Lane2 Loopback state Enumeration: 'not-support': 4, 'disable': 3, 'host-side-enable': 2, 'line-side-enable': 1. |
| mc40G_OEOLane3LoopMode | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.11 | integer | read-write |
card's Lane3 Loopback state Enumeration: 'not-support': 4, 'disable': 3, 'host-side-enable': 2, 'line-side-enable': 1. |
| mc40G_OEOLane4LoopMode | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.12 | integer | read-write |
card's Lane4 Loopback state Enumeration: 'not-support': 4, 'disable': 3, 'host-side-enable': 2, 'line-side-enable': 1. |
| mc40G_OEOLoopMode | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.13 | integer | read-write |
card's Loopback state Enumeration: 'all': 1, 'disable': 4, 'host-side-enable': 3, 'line-side-enable': 2, 'not-support': 5. |
| mc40G_OEOSpeedMode | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.14 | integer | read-write |
speed1: 1X40G: 10G LAN(10312.5Mbps) speed2: 1X40G: OTU3(10754.60325Mbps) speed3: 1X40G: OTU3e2(11145.83875Mbps) speed4: 4X10G: 10G LAN(10312.5Mbps) speed5: 4X10G: CPRI(9830.4 Mbps) speed6: 4X10G: OC-192/STM-64(9953.28Mbps) speed7: 4X10G: OC-192/STM-64(10664.228571427Mbps) speed8: 4X10G: OC-192/STM-64(10709.225316455Mbps) speed9: 4X10G: 10G Ethernet(11049.107142857Mbps) speed10: 4X10G: 10GFibreChannel(10518.750Mbps) speed11: 4X10G: 10GFibreChannel(11270.089285714Mbps) speed12: 4X10G: 10GFibreChannel(11317.642405063Mbps) speed13: 4X10G: 10GInfiniband(10000.00Mbps) Enumeration: 'not-support': 14, 'mc40GSpeed-13': 13, 'mc40GSpeed-12': 12, 'mc40GSpeed-11': 11, 'mc40GSpeed-10': 10, 'no-card': 0, 'mc40GSpeed-3': 3, 'mc40GSpeed-2': 2, 'mc40GSpeed-1': 1, 'mc40GSpeed-7': 7, 'mc40GSpeed-6': 6, 'mc40GSpeed-5': 5, 'mc40GSpeed-4': 4, 'mc40GSpeed-9': 9, 'mc40GSpeed-8': 8. |
| mc40G_OEOHWLoopMode | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.15 | integer | read-only |
card's HW Loopback state Enumeration: 'not-support': 4, 'disable': 3, 'host-side-enable': 2, 'line-side-enable': 1. |
| mc40G_OEOHWSpeedMode | 1.3.6.1.4.1.6688.1.1.1.4.2.8.1.1.1.16 | integer | read-only |
speed1: 1X40G: 10G LAN(10312.5Mbps) speed2: 1X40G: OTU3(10754.60325Mbps) speed3: 1X40G: OTU3e2(11145.83875Mbps) speed4: 4X10G: 10G LAN(10312.5Mbps) speed5: 4X10G: CPRI(9830.4 Mbps) speed6: 4X10G: OC-192/STM-64(9953.28Mbps) speed7: 4X10G: OC-192/STM-64(10664.228571427Mbps) speed8: 4X10G: OC-192/STM-64(10709.225316455Mbps) speed9: 4X10G: 10G Ethernet(11049.107142857Mbps) speed10: 4X10G: 10GFibreChannel(10518.750Mbps) speed11: 4X10G: 10GFibreChannel(11270.089285714Mbps) speed12: 4X10G: 10GFibreChannel(11317.642405063Mbps) Enumeration: 'not-support': 13, 'mc40GSpeed-12': 12, 'mc40GSpeed-11': 11, 'mc40GSpeed-10': 10, 'no-card': 0, 'mc40GSpeed-3': 3, 'mc40GSpeed-2': 2, 'mc40GSpeed-1': 1, 'mc40GSpeed-7': 7, 'mc40GSpeed-6': 6, 'mc40GSpeed-5': 5, 'mc40GSpeed-4': 4, 'mc40GSpeed-9': 9, 'mc40GSpeed-8': 8. |
| mcQsfpSpecificObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.9 | |||
| mcNtwQSfpObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.9.1 | |||
| mcNtwQSfpTable | 1.3.6.1.4.1.6688.1.1.1.4.2.9.1.1 | no-access |
MC Ntw QSFP table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.9.1.1.1 | no-access |
MC Ntw QSFP entry definition |
||
| getNtwQSfpCmd | 1.3.6.1.4.1.6688.1.1.1.4.2.9.1.1.1.1 | integer | read-write |
This command will get the updated sfp information. Please send this command prior to getting the following params, otherwise the history sfp information will be sent back. Enumeration: 'na': 0, 'local': 1, 'remote': 2. |
| qsfpNtwConnector | 1.3.6.1.4.1.6688.1.1.1.4.2.9.1.1.1.2 | integer | read-only |
SFP connector type (one byte) 0x07: LC 0x0B: Optical Pigtail 0x0C: MPO 0x21: Copper Pigtail others: unsupported |
| qsfpNtwTemperature | 1.3.6.1.4.1.6688.1.1.1.4.2.9.1.1.1.3 | integer | read-only |
SFP temperature (one type, signed) |
| qsfpNtwTxPower1 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.1.1.1.4 | integer | read-only |
SFP tx power (one type, signed) |
| qsfpNtwTxPower2 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.1.1.1.5 | integer | read-only |
SFP tx power (one type, signed) |
| qsfpNtwTxPower3 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.1.1.1.6 | integer | read-only |
SFP tx power (one type, signed) |
| qsfpNtwTxPower4 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.1.1.1.7 | integer | read-only |
SFP tx power (one type, signed) |
| qsfpNtwRxPower1 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.1.1.1.8 | integer | read-only |
SFP rx power (one type, signed) |
| qsfpNtwRxPower2 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.1.1.1.9 | integer | read-only |
SFP rx power (one type, signed) |
| qsfpNtwRxPower3 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.1.1.1.10 | integer | read-only |
SFP rx power (one type, signed) |
| qsfpNtwRxPower4 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.1.1.1.11 | integer | read-only |
SFP rx power (one type, signed) |
| mcAccQSfpObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.9.2 | |||
| mcAccQSfpTable | 1.3.6.1.4.1.6688.1.1.1.4.2.9.2.1 | no-access |
MC Acc QSFP table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.9.2.1.1 | no-access |
MC Acc QSFP entry definition |
||
| getAccQSfpCmd | 1.3.6.1.4.1.6688.1.1.1.4.2.9.2.1.1.1 | integer | read-write |
This command will get the updated sfp information. Please send this command prior to getting the following params, otherwise the history sfp information will be sent back. Enumeration: 'na': 0, 'local': 1, 'remote': 2. |
| qsfpAccConnector | 1.3.6.1.4.1.6688.1.1.1.4.2.9.2.1.1.2 | integer | read-only |
SFP connector type (one byte) 0x07: LC 0x0B: Optical Pigtail 0x0C: MPO 0x21: Copper Pigtail others: unsupported |
| qsfpAccTemperature | 1.3.6.1.4.1.6688.1.1.1.4.2.9.2.1.1.3 | integer | read-only |
SFP temperature (one type, signed) |
| qsfpAccTxPower1 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.2.1.1.4 | integer | read-only |
SFP tx power (one type, signed) |
| qsfpAccTxPower2 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.2.1.1.5 | integer | read-only |
SFP tx power (one type, signed) |
| qsfpAccTxPower3 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.2.1.1.6 | integer | read-only |
SFP tx power (one type, signed) |
| qsfpAccTxPower4 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.2.1.1.7 | integer | read-only |
SFP tx power (one type, signed) |
| qsfpAccRxPower1 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.2.1.1.8 | integer | read-only |
SFP rx power (one type, signed) |
| qsfpAccRxPower2 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.2.1.1.9 | integer | read-only |
SFP rx power (one type, signed) |
| qsfpAccRxPower3 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.2.1.1.10 | integer | read-only |
SFP rx power (one type, signed) |
| qsfpAccRxPower4 | 1.3.6.1.4.1.6688.1.1.1.4.2.9.2.1.1.11 | integer | read-only |
SFP rx power (one type, signed) |
| mc2_5GMCObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.10 | |||
| mc2_5GMCSFP3Objects | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1 | |||
| mc2_5Cm1gSfpTable | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1 | no-access |
MC 1G SFP table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1.1 | no-access |
MC 1G SFP entry definition |
||
| mc2_5g_getSfpCmd | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1.1.1 | integer | read-write |
This command will get the updated sfp information. Please send this command prior to getting the following params, otherwise the history sfp information will be sent back. Enumeration: 'na': 0, 'local': 1, 'remote': 2. |
| mc2_5g_sfpCompliance | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1.1.2 | integer | read-only |
SFP compliance (one byte) if 0 then the attributs of sfpTemperature/sfpTranPower/sfpRecvPower should be ignored |
| mc2_5g_sfpConnector | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1.1.3 | integer | read-only |
SFP connector type (one byte) 0x01: SC 0x07: LC 0x22: RJ45 others: unsupported |
| mc2_5g_sfpTransCode | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1.1.4 | integer | read-only |
SFP transceiver code (one byte) bit0: SingleMode bit2: MultiMode bit3: MultiMode others: unsupported |
| mc2_5g_sfpSmLength | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1.1.5 | integer | read-only |
SFP link length for SingleMode, units of km. (one byte) applicable only when sfpTransCode is SingleMode |
| mc2_5g_sfpMmLength | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1.1.6 | integer | read-only |
SFP link length for MultiMode, units of 10m (one byte) applicable only when sfpTransCode is MultiMode |
| mc2_5g_sfpCopperLength | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1.1.7 | integer | read-only |
SFP link length for Copper, units of m (one byte) applicable only when sfpConnector is RJ45 |
| mc2_5g_sfpBrSpeed | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1.1.8 | integer | read-only |
SFP nominal signalling rate, units of 100Mbit/s (one byte) |
| mc2_5g_sfpWavelength | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1.1.9 | integer | read-only |
SFP laser wavelength (one word) |
| mc2_5g_sfpTemperature | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1.1.10 | integer | read-only |
SFP temperature (one type, signed) |
| mc2_5g_sfpTranPower | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1.1.11 | integer | read-only |
SFP tx power (one type, signed) |
| mc2_5g_sfpRecvPower | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1.1.12 | integer | read-only |
SFP rx power (one type, signed) |
| mc2_5g_sfpVoltage | 1.3.6.1.4.1.6688.1.1.1.4.2.10.1.1.1.13 | integer | read-only |
SFP voltage, units of 0.1mV (one word) |
| mc2_5GMCCardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.10.2 | |||
| mc2_5GMCCardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.10.2.1 | no-access |
MC 2-5GMC Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.10.2.1.1 | no-access |
MC Configuration entry definition |
||
| mc2_5GMCSfp3Exist | 1.3.6.1.4.1.6688.1.1.1.4.2.10.2.1.1.1 | integer | read-only |
Center 1G card's SFP3 indication Enumeration: 'na': 3, 'not-support': 4, 'removed': 2, 'inserted': 1. |
| mc2_5GMCPort1link | 1.3.6.1.4.1.6688.1.1.1.4.2.10.2.1.1.2 | integer | read-only |
Center card's electrical port1's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc2_5GMCPort2link | 1.3.6.1.4.1.6688.1.1.1.4.2.10.2.1.1.3 | integer | read-only |
Center card's electrical port2's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc2_5GMCPort3link | 1.3.6.1.4.1.6688.1.1.1.4.2.10.2.1.1.4 | integer | read-only |
Center card's electrical port3's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mcE1Objects | 1.3.6.1.4.1.6688.1.1.1.4.2.11 | |||
| mcE1CardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1 | |||
| mcE1CardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1 | no-access |
MC E1 + Eth Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1 | no-access |
MC Configuration entry definition |
||
| mcE1Txlink | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.1 | integer | read-only |
Center card's electrical port's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mcE1TxCurWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.2 | integer | read-only |
Center card's current work mode Enumeration: 'not-support': 7, 'm100-full': 2, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcE1SFP1Link | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.3 | integer | read-only |
Center card's SFP1 port's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mcE1Port1LOS | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.4 | integer | read-only |
card's E1 Port1 Los state Enumeration: 'alarm': 1, 'e1normal': 2, 'not-support': 3. |
| mcE1Port1AIS | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.5 | integer | read-only |
card's E1 Port1 AIS state Enumeration: 'alarm': 1, 'e1normal': 2, 'not-support': 3. |
| mcE1Port1CV | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.6 | integer | read-only |
card's E1 Port1 CV state Enumeration: 'alarm': 1, 'e1normal': 2, 'not-support': 3. |
| mcE1Port2LOS | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.7 | integer | read-only |
card's E1 Port2 Los state Enumeration: 'alarm': 1, 'e1normal': 2, 'not-support': 3. |
| mcE1Port2AIS | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.8 | integer | read-only |
card's E1 Port2 AIS state Enumeration: 'alarm': 1, 'e1normal': 2, 'not-support': 3. |
| mcE1Port2CV | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.9 | integer | read-only |
card's E1 Port2 CV state Enumeration: 'alarm': 1, 'e1normal': 2, 'not-support': 3. |
| mcE1Port1Loop | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.10 | integer | read-write |
card's Port1 Loopback state Enumeration: 'disabled': 3, 'internal': 2, 'external': 1. |
| mcE1Port2Loop | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.11 | integer | read-write |
card's Port2 Loopback state Enumeration: 'disabled': 3, 'internal': 2, 'external': 1. |
| mcRmtE1Txlink | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.12 | integer | read-only |
Remote card's electrical port's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mcRmtE1TxCurWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.13 | integer | read-only |
Remote card's current work mode Enumeration: 'not-support': 7, 'm100-full': 2, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcRmtE1SFP1Link | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.14 | integer | read-only |
Remote card's SFP1 port's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mcRmtE1Port1LOS | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.15 | integer | read-only |
Remote card's E1 Port1 Los state Enumeration: 'alarm': 1, 'e1normal': 2, 'not-support': 3. |
| mcRmtE1Port1AIS | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.16 | integer | read-only |
Remote card's E1 Port1 AIS state Enumeration: 'alarm': 1, 'e1normal': 2, 'not-support': 3. |
| mcRmtE1Port1CV | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.17 | integer | read-only |
Remote card's E1 Port1 CV state Enumeration: 'alarm': 1, 'e1normal': 2, 'not-support': 3. |
| mcRmtE1Port2LOS | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.18 | integer | read-only |
Remote card's E1 Port2 Los state Enumeration: 'alarm': 1, 'e1normal': 2, 'not-support': 3. |
| mcRmtE1Port2AIS | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.19 | integer | read-only |
Remote card's E1 Port2 AIS state Enumeration: 'alarm': 1, 'e1normal': 2, 'not-support': 3. |
| mcRmtE1Port2CV | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.20 | integer | read-only |
Remote card's E1 Port2 CV state Enumeration: 'alarm': 1, 'e1normal': 2, 'not-support': 3. |
| mcRmtE1Port1Loop | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.21 | integer | read-write |
Remote card's Port1 Loopback state Enumeration: 'disabled': 3, 'internal': 2, 'external': 1. |
| mcRmtE1Port2Loop | 1.3.6.1.4.1.6688.1.1.1.4.2.11.1.1.1.22 | integer | read-write |
Remote card's Port2 Loopback state Enumeration: 'disabled': 3, 'internal': 2, 'external': 1. |
| mc1GE2OObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.12 | |||
| mc1GE2OCardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1 | |||
| mc1GE2OCardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1 | no-access |
MC E2O Fiber backup Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1.1 | no-access |
MC Configuration entry definition |
||
| mc1GE2OPort1SFPlink | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1.1.1 | integer | read-only |
Center card's port1 SFP's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc1GE2OPort2SFPlink | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1.1.2 | integer | read-only |
Center card's port2 SFP's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc1GE2OTxlink | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1.1.3 | integer | read-only |
Center card's electrical port's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc1GE2OPortPri | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1.1.4 | integer | read-write |
Center card's Port Pri state Enumeration: 'not-support': 3, 'Port2': 2, 'Port1': 1. |
| mc1GE2OPort1SFPExist | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1.1.5 | integer | read-only |
E2O Port1 SFP indication Enumeration: 'na': 3, 'removed': 2, 'no-card': 0, 'inserted': 1, 'support': 4. |
| mc1GE2OPort2SFPExist | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1.1.6 | integer | read-only |
E2O Port2 SFP indication Enumeration: 'na': 3, 'removed': 2, 'no-card': 0, 'inserted': 1, 'support': 4. |
| mc1GE2OPortHWPri | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1.1.7 | integer | read-only |
Center card's Port Hardward Pri state Enumeration: 'not-support': 3, 'Port2': 2, 'Port1': 1. |
| mc1GE2ORmtPort1SFPlink | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1.1.8 | integer | read-only |
Remote card's port1 SFP's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc1GE2ORmtPort2SFPlink | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1.1.9 | integer | read-only |
Remote card's port2 SFP's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc1GE2ORmtTxlink | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1.1.10 | integer | read-only |
Remote card's electrical port's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc1GE2ORmtPort1SFPExist | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1.1.11 | integer | read-only |
E2O Port1 SFP indication Enumeration: 'na': 3, 'removed': 2, 'no-card': 0, 'inserted': 1, 'support': 4. |
| mc1GE2ORmtPort2SFPExist | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1.1.12 | integer | read-only |
E2O Port2 SFP indication Enumeration: 'na': 3, 'removed': 2, 'no-card': 0, 'inserted': 1, 'support': 4. |
| mc1GE2ORmtPortHWPri | 1.3.6.1.4.1.6688.1.1.1.4.2.12.1.1.1.13 | integer | read-only |
Remote card's Port Hardward Pri state Enumeration: 'not-support': 3, 'Port2': 2, 'Port1': 1. |
| mc1GO2OObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.13 | |||
| mc1GO2OCardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1 | |||
| mc1GO2OCardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1 | no-access |
MC O2O Fiber backup Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1 | no-access |
MC Configuration entry definition |
||
| mc1GO2OPort1SFPlink | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.1 | integer | read-only |
Center card's port1 SFP's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc1GO2OPort2SFPlink | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.2 | integer | read-only |
Center card's port2 SFP's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc1GO2OPort3SFPlink | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.3 | integer | read-only |
Center card's port3 SFP's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc1GO2OPortPri | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.4 | integer | read-write |
Center card's Port Pri state Enumeration: 'not-support': 3, 'Port2': 2, 'Port1': 1. |
| mc1GO2OPort1SFPExist | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.5 | integer | read-only |
O2O Port1 SFP indication Enumeration: 'na': 3, 'removed': 2, 'no-card': 0, 'inserted': 1, 'support': 4. |
| mc1GO2OPort2SFPExist | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.6 | integer | read-only |
O2O Port2 SFP indication Enumeration: 'na': 3, 'removed': 2, 'no-card': 0, 'inserted': 1, 'support': 4. |
| mc1GO2OPort3SFPExist | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.7 | integer | read-only |
O2O Port3 SFP indication Enumeration: 'na': 3, 'not-support': 4, 'removed': 2, 'inserted': 1. |
| mc1GO2OPortHWPri | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.8 | integer | read-only |
Local card's Port Hardward Pri state Enumeration: 'not-support': 3, 'Port2': 2, 'Port1': 1. |
| mc1GO2OPort3HWSpd | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.9 | integer | read-only |
Local card's Port3 Hardward Speed state Enumeration: 'M100': 1, 'not-support': 3, 'M1000': 2. |
| mc1GO2ORmtPort1SFPlink | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.10 | integer | read-only |
Remote card's port1 SFP's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc1GO2ORmtPort2SFPlink | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.11 | integer | read-only |
Remote card's port2 SFP's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc1GO2ORmtPort3SFPlink | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.12 | integer | read-only |
Remote card's port3 SFP's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc1GO2ORmtPort1SFPExist | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.13 | integer | read-only |
O2O Port1 SFP indication Enumeration: 'na': 3, 'removed': 2, 'no-card': 0, 'inserted': 1, 'support': 4. |
| mc1GO2ORmtPort2SFPExist | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.14 | integer | read-only |
O2O Port2 SFP indication Enumeration: 'na': 3, 'removed': 2, 'no-card': 0, 'inserted': 1, 'support': 4. |
| mc1GO2ORmtPort3SFPExist | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.15 | integer | read-only |
Remote card's SFP3 indication Enumeration: 'na': 3, 'not-support': 4, 'removed': 2, 'inserted': 1. |
| mc1GO2ORmtPortHWPri | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.16 | integer | read-only |
Remot card's Port Hardward Pri state Enumeration: 'not-support': 3, 'Port2': 2, 'Port1': 1. |
| mc1GO2ORmtPort3HWSpd | 1.3.6.1.4.1.6688.1.1.1.4.2.13.1.1.1.17 | integer | read-only |
Remot card's Port3 Hardward Speed state Enumeration: 'M100': 1, 'not-support': 3, 'M1000': 2. |
| mc1GO2OSFP3Objects | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2 | |||
| mc1GO2OSfp3Table | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1 | no-access |
MC 1G SFP table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1.1 | no-access |
MC 1G O2O SFP3 entry definition |
||
| mc1go2o_getSfpCmd | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1.1.1 | integer | read-write |
This command will get the updated sfp information. Please send this command prior to getting the following params, otherwise the history sfp information will be sent back. Enumeration: 'na': 0, 'local': 1, 'remote': 2. |
| mc1go2o_sfpCompliance | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1.1.2 | integer | read-only |
SFP compliance (one byte) if 0 then the attributs of sfpTemperature/sfpTranPower/sfpRecvPower should be ignored |
| mc1go2o_sfpConnector | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1.1.3 | integer | read-only |
SFP connector type (one byte) 0x01: SC 0x07: LC 0x22: RJ45 others: unsupported |
| mc1go2o_sfpTransCode | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1.1.4 | integer | read-only |
SFP transceiver code (one byte) bit0: SingleMode bit2: MultiMode bit3: MultiMode others: unsupported |
| mc1go2o_sfpSmLength | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1.1.5 | integer | read-only |
SFP link length for SingleMode, units of km. (one byte) applicable only when sfpTransCode is SingleMode |
| mc1go2o_sfpMmLength | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1.1.6 | integer | read-only |
SFP link length for MultiMode, units of 10m (one byte) applicable only when sfpTransCode is MultiMode |
| mc1go2o_sfpCopperLength | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1.1.7 | integer | read-only |
SFP link length for Copper, units of m (one byte) applicable only when sfpConnector is RJ45 |
| mc1go2o_sfpBrSpeed | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1.1.8 | integer | read-only |
SFP nominal signalling rate, units of 100Mbit/s (one byte) |
| mc1go2o_sfpWavelength | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1.1.9 | integer | read-only |
SFP laser wavelength (one word) |
| mc1go2o_sfpTemperature | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1.1.10 | integer | read-only |
SFP temperature (one type, signed) |
| mc1go2o_sfpTranPower | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1.1.11 | integer | read-only |
SFP tx power (one type, signed) |
| mc1go2o_sfpRecvPower | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1.1.12 | integer | read-only |
SFP rx power (one type, signed) |
| mc1go2o_sfpVoltage | 1.3.6.1.4.1.6688.1.1.1.4.2.13.2.1.1.13 | integer | read-only |
SFP voltage, units of 0.1mV (one word) |
| mc10GOEO1RObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.14 | |||
| mc10GOEO1RCardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.14.1 | |||
| mc10GOEO1RCardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.14.1.1 | no-access |
MC 10G OEO 1R Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.14.1.1.1 | no-access |
MC Configuration entry definition |
||
| mcAccXFP1WaveLengthTunability | 1.3.6.1.4.1.6688.1.1.1.4.2.14.1.1.1.1 | integer | read-only |
XFP1's wavelength tunability Enumeration: 'not-support': 3, 'Supported': 1, 'Unsupported': 2. |
| mcAccXFP1WaveLengthTunable | 1.3.6.1.4.1.6688.1.1.1.4.2.14.1.1.1.2 | integer | read-only |
XFP1's wavelength tunable status Enumeration: 'Doing': 1, 'Completed': 2, 'not-support': 3. |
| mcAccXFP1WaveLength | 1.3.6.1.4.1.6688.1.1.1.4.2.14.1.1.1.3 | integer | read-write |
XFP1's wavelength |
| mcNtwXFP2WaveLengthTunability | 1.3.6.1.4.1.6688.1.1.1.4.2.14.1.1.1.4 | integer | read-only |
XFP2's wavelength tunability Enumeration: 'not-support': 3, 'Supported': 1, 'Unsupported': 2. |
| mcNtwXFP2WaveLengthTunable | 1.3.6.1.4.1.6688.1.1.1.4.2.14.1.1.1.5 | integer | read-only |
XFP2's wavelength tunable status Enumeration: 'Doing': 1, 'Completed': 2, 'not-support': 3. |
| mcNtwXFP2WaveLength | 1.3.6.1.4.1.6688.1.1.1.4.2.14.1.1.1.6 | integer | read-write |
XFP2's wavelength |
| mcAccXFP1TunableType | 1.3.6.1.4.1.6688.1.1.1.4.2.14.1.1.1.7 | integer | read-only |
XFP1's wavelength tunable type Enumeration: 'wavelength': 2, 'not-support': 3, 'channel': 1. |
| mcNtwXFP2TunableType | 1.3.6.1.4.1.6688.1.1.1.4.2.14.1.1.1.8 | integer | read-only |
XFP2's wavelength tunable type Enumeration: 'wavelength': 2, 'not-support': 3, 'channel': 1. |
| mc10GOEO3RObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.15 | |||
| mc10GOEO3RCardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.15.1 | |||
| mc10GOEO3RCardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.15.1.1 | no-access |
MC 10G OEO 3R tunable wavelength Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.15.1.1.1 | no-access |
MC Configuration entry definition |
||
| accXFP1WaveLengthTunability | 1.3.6.1.4.1.6688.1.1.1.4.2.15.1.1.1.1 | integer | read-only |
XFP1's wavelength tunability Enumeration: 'not-support': 3, 'Supported': 1, 'Unsupported': 2. |
| accXFP1WaveLengthTunable | 1.3.6.1.4.1.6688.1.1.1.4.2.15.1.1.1.2 | integer | read-only |
XFP1's wavelength tunable status Enumeration: 'Doing': 1, 'Completed': 2, 'not-support': 3. |
| accXFP1WaveLength | 1.3.6.1.4.1.6688.1.1.1.4.2.15.1.1.1.3 | integer | read-write |
XFP1's wavelength |
| ntwXFP2WaveLengthTunability | 1.3.6.1.4.1.6688.1.1.1.4.2.15.1.1.1.4 | integer | read-only |
XFP2's wavelength tunability Enumeration: 'not-support': 3, 'Supported': 1, 'Unsupported': 2. |
| ntwXFP2WaveLengthTunable | 1.3.6.1.4.1.6688.1.1.1.4.2.15.1.1.1.5 | integer | read-only |
XFP2's wavelength tunable status Enumeration: 'Doing': 1, 'Completed': 2, 'not-support': 3. |
| ntwXFP2WaveLength | 1.3.6.1.4.1.6688.1.1.1.4.2.15.1.1.1.6 | integer | read-write |
XFP2's wavelength |
| accXFP1TunableType | 1.3.6.1.4.1.6688.1.1.1.4.2.15.1.1.1.7 | integer | read-only |
XFP1's wavelength tunable type Enumeration: 'wavelength': 2, 'not-support': 3, 'channel': 1. |
| ntwXFP2TunableType | 1.3.6.1.4.1.6688.1.1.1.4.2.15.1.1.1.8 | integer | read-only |
XFP2's wavelength tunable type Enumeration: 'wavelength': 2, 'not-support': 3, 'channel': 1. |
| mcCWDMObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.16 | |||
| mcCWDMCardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.16.1 | |||
| mcCWDMCardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.16.1.1 | no-access |
MC CWDM table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.16.1.1.1 | no-access |
MC Configuration entry definition |
||
| cwdmWavelengthCount | 1.3.6.1.4.1.6688.1.1.1.4.2.16.1.1.1.1 | integer | read-only |
wavelength count |
| cwdmWavelength1 | 1.3.6.1.4.1.6688.1.1.1.4.2.16.1.1.1.2 | displaystring | read-only |
CWDM Card wavelenth 1 |
| cwdmWavelength2 | 1.3.6.1.4.1.6688.1.1.1.4.2.16.1.1.1.3 | displaystring | read-only |
CWDM Card wavelenth 2 |
| cwdmWavelength3 | 1.3.6.1.4.1.6688.1.1.1.4.2.16.1.1.1.4 | displaystring | read-only |
CWDM Card wavelenth 3 |
| cwdmWavelength4 | 1.3.6.1.4.1.6688.1.1.1.4.2.16.1.1.1.5 | displaystring | read-only |
CWDM Card wavelenth 4 |
| cwdmWavelength5 | 1.3.6.1.4.1.6688.1.1.1.4.2.16.1.1.1.6 | displaystring | read-only |
CWDM Card wavelenth 5 |
| cwdmWavelength6 | 1.3.6.1.4.1.6688.1.1.1.4.2.16.1.1.1.7 | displaystring | read-only |
CWDM Card wavelenth 6 |
| cwdmWavelength7 | 1.3.6.1.4.1.6688.1.1.1.4.2.16.1.1.1.8 | displaystring | read-only |
CWDM Card wavelenth 7 |
| cwdmWavelength8 | 1.3.6.1.4.1.6688.1.1.1.4.2.16.1.1.1.9 | displaystring | read-only |
CWDM Card wavelenth 8 |
| mc10G_OEO2RObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.17 | |||
| mc10G_OEO2RCardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1 | |||
| mc10G_OEO2RCardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1 | no-access |
MC 10G OEO 2R Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1 | no-access |
MC Configuration entry definition |
||
| mc10G_OEO2RCurSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.1 | integer | read-only |
Center card's current speed mode 1: 8.5G 2: 10.3G-11.7G 3: 9.95G-11.3G Enumeration: 'not-support': 4, 'Speed85': 1, 'Speed995to113': 3, 'Speed103to117': 2. |
| mc10G_OEO2RCfgSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.2 | integer | read-write |
Center card's current speed mode 1: 8.5G 2: 10.3G-11.7G 3: 9.95G-11.3G Enumeration: 'not-support': 4, 'Speed85': 1, 'Speed995to113': 3, 'Speed103to117': 2. |
| mc10G_OEO2RSFP1Loopback | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.3 | integer | read-write |
card's SFP1 Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mc10G_OEO2RSFP2Loopback | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.4 | integer | read-write |
card's SFP2 Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mc10G_OEO2RSFP1 | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.5 | integer | read-only |
Center card's SFP1 link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc10G_OEO2RSFP2 | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.6 | integer | read-only |
Center card's SFP2 link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mc10G_OEO2RHWSpdMode | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.7 | integer | read-only |
Center card's current speed mode 1: 8.5G 2: 10.3G-11.7G 3: 9.95G-11.3G Enumeration: 'not-support': 4, 'Speed85': 1, 'Speed995to113': 3, 'Speed103to117': 2. |
| mc10G_OEO2RHWSFP1Loopback | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.8 | integer | read-only |
card's HW Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mc10G_OEO2RHWSFP2Loopback | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.9 | integer | read-only |
card's HW Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mc10G_OEO2RVersion | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.10 | displaystring | read-only |
MC version |
| mc10GXFP1WaveLengthTunability | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.11 | integer | read-only |
XFP1's wavelength tunability Enumeration: 'not-support': 3, 'Supported': 1, 'Unsupported': 2. |
| mc10GXFP1WaveLengthTunable | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.12 | integer | read-only |
XFP1's wavelength tunable status Enumeration: 'Doing': 1, 'Completed': 2, 'not-support': 3. |
| mc10GXFP1WaveLength | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.13 | integer | read-write |
XFP1's wavelength |
| mc10GXFP2WaveLengthTunability | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.14 | integer | read-only |
XFP2's wavelength tunability Enumeration: 'not-support': 3, 'Supported': 1, 'Unsupported': 2. |
| mc10GXFP2WaveLengthTunable | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.15 | integer | read-only |
XFP2's wavelength tunable status Enumeration: 'Doing': 1, 'Completed': 2, 'not-support': 3. |
| mc10GXFP2WaveLength | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.16 | integer | read-write |
XFP2's wavelength |
| mc10G_OEO2R_accType | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.17 | integer | read-only |
Enumeration: 'XFP': 1, 'unknow': 3, 'SFP': 2. |
| mc10G_OEO2R_ntwType | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.18 | integer | read-only |
Enumeration: 'XFP': 1, 'unknow': 3, 'SFP': 2. |
| mc10G_OEO2R_accTunableType | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.19 | integer | read-only |
XFP1's wavelength tunable type Enumeration: 'wavelength': 2, 'not-support': 3, 'channel': 1. |
| mc10G_OEO2R_ntwTunableType | 1.3.6.1.4.1.6688.1.1.1.4.2.17.1.1.1.20 | integer | read-only |
XFP2's wavelength tunable type Enumeration: 'wavelength': 2, 'not-support': 3, 'channel': 1. |
| mcQCA8334Objects | 1.3.6.1.4.1.6688.1.1.1.4.2.18 | |||
| mcQCA8334CardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.18.1 | |||
| mcQCA8334CardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.18.1.1 | no-access |
MC QCA8334 Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.18.1.1.1 | no-access |
MC Configuration entry definition |
||
| mcQCA8334VlanMode | 1.3.6.1.4.1.6688.1.1.1.4.2.18.1.1.1.1 | integer | read-write |
Center card's vlan mode Enumeration: 'not-support': 4, 'mode1': 2, 'mode2': 3, 'Normal': 1. |
| mcQCA8334PortObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.18.2 | |||
| mcQCA8334PortTable | 1.3.6.1.4.1.6688.1.1.1.4.2.18.2.1 | no-access |
MC QCA8334 Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.18.2.1.1 | no-access |
MC Configuration entry definition |
||
| mcQCA8334PortIdx | 1.3.6.1.4.1.6688.1.1.1.4.2.18.2.1.1.1 | integer | read-only |
Port index Enumeration: 'port2': 2, 'port1': 1. |
| mcQCA8334CurWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.18.2.1.1.2 | integer | read-only |
Center card's port current work mode Enumeration: 'not-support': 7, 'm100-full': 2, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcQCA8334CfgWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.18.2.1.1.3 | integer | read-write |
Center card's port configurable work mode Enumeration: 'not-support': 7, 'm100-full': 2, 'mAuto': 1, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcQCA8334UpStream | 1.3.6.1.4.1.6688.1.1.1.4.2.18.2.1.1.4 | gauge32 | read-write |
Center card's port up stream of MC |
| mcQCA8334DownStream | 1.3.6.1.4.1.6688.1.1.1.4.2.18.2.1.1.5 | gauge32 | read-write |
Center card's port down stream of MC |
| mcQCA8334Txlink | 1.3.6.1.4.1.6688.1.1.1.4.2.18.2.1.1.6 | integer | read-only |
Center card's port 1 electrical port's link status Enumeration: 'down': 2, 'not-support': 3, 'up': 1. |
| mcQCA8334RmtCurWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.18.2.1.1.7 | integer | read-only |
Remote card's port 1 current work mode Enumeration: 'not-support': 7, 'm100-full': 2, 'no-card': 0, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcQCA8334RmtCfgWorkMode | 1.3.6.1.4.1.6688.1.1.1.4.2.18.2.1.1.8 | integer | read-write |
Remote card's port1 configurable work mode Enumeration: 'not-support': 7, 'm100-full': 2, 'mAuto': 1, 'no-card': 0, 'm100-half': 3, 'm10-full': 4, 'm10-half': 5, 'm1G-full': 6. |
| mcQCA8334RmtTxlink | 1.3.6.1.4.1.6688.1.1.1.4.2.18.2.1.1.9 | integer | read-only |
Remote card's port electrial port status Enumeration: 'down': 2, 'not-support': 3, 'no-card': 0, 'up': 1. |
| mcE1T1Objects | 1.3.6.1.4.1.6688.1.1.1.4.2.19 | |||
| mcE1T1CardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1 | |||
| mcE1T1CardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1 | no-access |
MC E1T1 Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1 | no-access |
MC Configuration entry definition |
||
| mcE1T1Type | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.1 | integer | read-only |
Center card's current type Enumeration: 'not-support': 3, 'E1': 1, 'T1': 2. |
| mcE1T1FLink | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.2 | integer | read-only |
Center card's current link Enumeration: 'Down': 2, 'not-support': 3, 'Up': 1. |
| mcE1T1FLossAlarm | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.3 | integer | read-only |
Enumeration: 'Alarm': 1, 'not-support': 3, 'Normal': 2. |
| mcE1T1TLossAlarm | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.4 | integer | read-only |
Enumeration: 'Alarm': 1, 'not-support': 3, 'Normal': 2. |
| mcE1T1AISAlarm | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.5 | integer | read-only |
Enumeration: 'Alarm': 1, 'not-support': 3, 'Normal': 2. |
| mcE1T1TLoop | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.6 | integer | read-write |
Tx Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mcE1T1FLoop | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.7 | integer | read-write |
Fx Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mcE1T1CodeType | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.8 | integer | read-write |
coding type Enumeration: 'AMI': 2, 'not-support': 3, 'E1-HDB3-Or-T1-B8ZS': 1. |
| mcE1T1Version | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.9 | displaystring | read-only |
MC version |
| mcE1T1RmtFLink | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.10 | integer | read-only |
Center card's current link Enumeration: 'Down': 2, 'not-support': 3, 'Up': 1. |
| mcE1T1RmtFLossAlarm | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.11 | integer | read-only |
Enumeration: 'Alarm': 1, 'not-support': 3, 'Normal': 2. |
| mcE1T1RmtTLossAlarm | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.12 | integer | read-only |
Enumeration: 'Alarm': 1, 'not-support': 3, 'Normal': 2. |
| mcE1T1RmtAISAlarm | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.13 | integer | read-only |
Enumeration: 'Alarm': 1, 'not-support': 3, 'Normal': 2. |
| mcE1T1RmtTLoop | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.14 | integer | read-write |
Tx Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mcE1T1RmtFLoop | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.15 | integer | read-write |
Fx Loopback state Enumeration: 'not-support': 3, 'enable': 1, 'disable': 2. |
| mcE1T1RmtCodeType | 1.3.6.1.4.1.6688.1.1.1.4.2.19.1.1.1.16 | integer | read-write |
coding type Enumeration: 'AMI': 2, 'not-support': 3, 'E1-HDB3-Or-T1-B8ZS': 1. |
| mc10GOEEXFPTunableObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.20 | |||
| mc10GOEEXFPTunableCardObjects | 1.3.6.1.4.1.6688.1.1.1.4.2.20.1 | |||
| mc10GOEEXFPTunableCardTable | 1.3.6.1.4.1.6688.1.1.1.4.2.20.1.1 | no-access |
MC 10G OEE tunable wavelength Configuration table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.2.20.1.1.1 | no-access |
MC Configuration entry definition |
||
| xfpWaveLengthTunability | 1.3.6.1.4.1.6688.1.1.1.4.2.20.1.1.1.1 | integer | read-only |
XFP's wavelength tunability Enumeration: 'not-support': 3, 'Supported': 1, 'Unsupported': 2. |
| xfpWaveLengthTunable | 1.3.6.1.4.1.6688.1.1.1.4.2.20.1.1.1.2 | integer | read-only |
XFP's wavelength tunable status Enumeration: 'Doing': 1, 'Completed': 2, 'not-support': 3. |
| xfpWaveLength | 1.3.6.1.4.1.6688.1.1.1.4.2.20.1.1.1.3 | integer | read-write |
XFP's wavelength |
| xfpTunableType | 1.3.6.1.4.1.6688.1.1.1.4.2.20.1.1.1.4 | integer | read-only |
XFP's wavelength tunable type Enumeration: 'wavelength': 2, 'not-support': 3, 'channel': 1. |
| mcPmObjects | 1.3.6.1.4.1.6688.1.1.1.4.3 | |||
| mcPmTable | 1.3.6.1.4.1.6688.1.1.1.4.3.1 | no-access |
MC Performance table |
|
| 1.3.6.1.4.1.6688.1.1.1.4.3.1.1 | no-access |
MC Performance entry definition |
||
| mcRxByteHi | 1.3.6.1.4.1.6688.1.1.1.4.3.1.1.1 | counter32 | read-only |
The total number of reveive bytes (high) |
| mcRxByteLo | 1.3.6.1.4.1.6688.1.1.1.4.3.1.1.2 | counter32 | read-only |
The total number of reveive bytes (low) |
| mcTxByteHi | 1.3.6.1.4.1.6688.1.1.1.4.3.1.1.3 | counter32 | read-only |
The total number of transmit bytes (high) |
| mcTxByteLo | 1.3.6.1.4.1.6688.1.1.1.4.3.1.1.4 | counter32 | read-only |
The total number of transmit bytes (low) |
| mcPmRest | 1.3.6.1.4.1.6688.1.1.1.4.3.1.1.5 | integer | read-write |
reset counter Enumeration: 'reset': 2, 'idle': 1, 'not-support': 3. |
| alarmMIB | 1.3.6.1.4.1.6688.1.1.2 | |||
| shelf_Detected | 1.3.6.1.4.1.6688.1.1.2.1 |
A slave shelf is detected (1~19) |
||
| shelf_Lost | 1.3.6.1.4.1.6688.1.1.2.2 |
A shelf is lost |
||
| shelf_psuA_On | 1.3.6.1.4.1.6688.1.1.2.3 |
PSU A is detected |
||
| shelf_psuA_Off | 1.3.6.1.4.1.6688.1.1.2.4 |
PSU A is lost |
||
| shelf_psuB_On | 1.3.6.1.4.1.6688.1.1.2.5 |
PSU B is detected |
||
| shelf_psuB_Off | 1.3.6.1.4.1.6688.1.1.2.6 |
PSU B is lost |
||
| shelf_fan_On | 1.3.6.1.4.1.6688.1.1.2.7 |
Fan A is detected |
||
| shelf_fan_Off | 1.3.6.1.4.1.6688.1.1.2.8 |
Fan A is lost |
||
| card_Detected | 1.3.6.1.4.1.6688.1.1.2.20 |
A card is detected (20~29) |
||
| card_Lost | 1.3.6.1.4.1.6688.1.1.2.21 |
A card is lost |
||
| card_MC_Co_Tx_Up | 1.3.6.1.4.1.6688.1.1.2.30 |
The tx link of mc in center side is up (above 30) |
||
| card_MC_Co_Tx_Down | 1.3.6.1.4.1.6688.1.1.2.31 |
The tx link of mc in center side is broken |
||
| card_MC_Co_Fx_Up | 1.3.6.1.4.1.6688.1.1.2.32 |
The fx link of mc in center side is up |
||
| card_MC_Co_Fx_Down | 1.3.6.1.4.1.6688.1.1.2.33 |
The fx link of mc in center side is broken |
||
| card_MC_Rmt_Tx_Up | 1.3.6.1.4.1.6688.1.1.2.34 |
The tx link of mc in customer side is up |
||
| card_MC_Rmt_Tx_Down | 1.3.6.1.4.1.6688.1.1.2.35 |
The tx link of mc in customer side is broken |
||
| card_MC_Rmt_PwrDown | 1.3.6.1.4.1.6688.1.1.2.36 |
Remote mc power down detected |
||
| card_MC_Co_Ntw_SFP_Inserted | 1.3.6.1.4.1.6688.1.1.2.37 |
Local network port SFP inserted |
||
| card_MC_Co_Ntw_SFP_Removed | 1.3.6.1.4.1.6688.1.1.2.38 |
Local network port SFP removed |
||
| card_MC_Co_Acc_SFP_Inserted | 1.3.6.1.4.1.6688.1.1.2.39 |
Local access port SFP inserted |
||
| card_MC_Co_Acc_SFP_Removed | 1.3.6.1.4.1.6688.1.1.2.40 |
Local access port SFP removed |
||
| card_MC_Rmt_Acc_SFP_Inserted | 1.3.6.1.4.1.6688.1.1.2.41 |
Remote access port SFP inserted |
||
| card_MC_Rmt_Acc_SFP_Removed | 1.3.6.1.4.1.6688.1.1.2.42 |
Remote access port SFP removed |
||
| card_MC_Co_Tx_Up1 | 1.3.6.1.4.1.6688.1.1.2.43 |
The tx1 link of mc in center side is up |
||
| card_MC_Co_Tx_Down1 | 1.3.6.1.4.1.6688.1.1.2.44 |
The tx1 link of mc in center side is broken |
||
| card_MC_Co_Tx_Up2 | 1.3.6.1.4.1.6688.1.1.2.45 |
The tx2 link of mc in center side is up |
||
| card_MC_Co_Tx_Down2 | 1.3.6.1.4.1.6688.1.1.2.46 |
The tx2 link of mc in center side is broken |
||
| card_MC_Rmt_Tx_Up1 | 1.3.6.1.4.1.6688.1.1.2.47 |
The tx1 link of mc in customer side is up |
||
| card_MC_Rmt_Tx_Down1 | 1.3.6.1.4.1.6688.1.1.2.48 |
The tx1 link of mc in customer side is broken |
||
| card_MC_Rmt_Tx_Up2 | 1.3.6.1.4.1.6688.1.1.2.49 |
The tx2 link of mc in customer side is up |
||
| card_MC_Rmt_Tx_Down2 | 1.3.6.1.4.1.6688.1.1.2.50 |
The tx2 link of mc in customer side is broken |
||
| card_MC_Co_SFP1_Inserted | 1.3.6.1.4.1.6688.1.1.2.51 |
Local SFP1 inserted |
||
| card_MC_Co_SFP1_Removed | 1.3.6.1.4.1.6688.1.1.2.52 |
Local SFP1 removed |
||
| card_MC_Co_SFP2_Inserted | 1.3.6.1.4.1.6688.1.1.2.53 |
Local SFP2 inserted |
||
| card_MC_Co_SFP2_Removed | 1.3.6.1.4.1.6688.1.1.2.54 |
Local SFP2 removed |
||
| card_MC_Co_SFP1_Up | 1.3.6.1.4.1.6688.1.1.2.55 |
The SFP1 link of mc in center side is up |
||
| card_MC_Co_SFP1_Down | 1.3.6.1.4.1.6688.1.1.2.56 |
The SFP1 link of mc in center side is broken |
||
| card_MC_Co_SFP2_Up | 1.3.6.1.4.1.6688.1.1.2.57 |
The SFP2 link of mc in center side is up |
||
| card_MC_Co_SFP2_Down | 1.3.6.1.4.1.6688.1.1.2.58 |
The SFP2 link of mc in center side is broken |
||
| card_MC_Rmt_SFP1_Inserted | 1.3.6.1.4.1.6688.1.1.2.59 |
Remote SFP1 inserted |
||
| card_MC_Rmt_SFP1_Removed | 1.3.6.1.4.1.6688.1.1.2.60 |
Remote SFP1 removed |
||
| card_MC_Rmt_SFP1_Up | 1.3.6.1.4.1.6688.1.1.2.61 |
The SFP1 link of mc in customer side is up |
||
| card_MC_Rmt_SFP1_Down | 1.3.6.1.4.1.6688.1.1.2.62 |
The SFP1 link of mc in customer side is broken |
||
| card_MC_Co_SFPSFP1_Inserted | 1.3.6.1.4.1.6688.1.1.2.63 |
Local SFP+1 inserted |
||
| card_MC_Co_SFPSFP1_Removed | 1.3.6.1.4.1.6688.1.1.2.64 |
Local SFP+1 removed |
||
| card_MC_Co_SFPSFP2_Inserted | 1.3.6.1.4.1.6688.1.1.2.65 |
Local SFPSFP2 inserted |
||
| card_MC_Co_SFPSFP2_Removed | 1.3.6.1.4.1.6688.1.1.2.66 |
Local SFP+2 removed |
||
| card_MC_Rmt_SFPSFP1_Inserted | 1.3.6.1.4.1.6688.1.1.2.67 |
Remote SFP+1 inserted |
||
| card_MC_Rmt_SFPSFP1_Removed | 1.3.6.1.4.1.6688.1.1.2.68 |
Remote SFP+1 removed |
||
| card_MC_Co_XFP1_Inserted | 1.3.6.1.4.1.6688.1.1.2.69 |
Local XFP+1 inserted |
||
| card_MC_Co_XFP1_Removed | 1.3.6.1.4.1.6688.1.1.2.70 |
Local XFP+1 removed |
||
| card_MC_Co_XFP2_Inserted | 1.3.6.1.4.1.6688.1.1.2.71 |
Local XFP2 inserted |
||
| card_MC_Co_XFP2_Removed | 1.3.6.1.4.1.6688.1.1.2.72 |
Local XFP+2 removed |
||
| card_MC_Rmt_XFP1_Inserted | 1.3.6.1.4.1.6688.1.1.2.73 |
Remote XFP+1 inserted |
||
| card_MC_Rmt_XFP1_Removed | 1.3.6.1.4.1.6688.1.1.2.74 |
Remote XFP+1 removed |
||
| card_MC_Co_SFPSFP1_Up | 1.3.6.1.4.1.6688.1.1.2.75 |
The SFP+1 link of mc in center side is up |
||
| card_MC_Co_SFPSFP1_Down | 1.3.6.1.4.1.6688.1.1.2.76 |
The SFP+1 link of mc in center side is broken |
||
| card_MC_Co_SFPSFP2_Up | 1.3.6.1.4.1.6688.1.1.2.77 |
The SFP+2 link of mc in center side is up |
||
| card_MC_Co_SFPSFP2_Down | 1.3.6.1.4.1.6688.1.1.2.78 |
The SFP+2 link of mc in center side is broken |
||
| card_MC_Rmt_SFPSFP1_Up | 1.3.6.1.4.1.6688.1.1.2.79 |
The SFPSFP1 link of mc in customer side is up |
||
| card_MC_Rmt_SFPSFP1_Down | 1.3.6.1.4.1.6688.1.1.2.80 |
The SFP+1 link of mc in customer side is broken |
||
| card_MC_Co_XFP1_Up | 1.3.6.1.4.1.6688.1.1.2.81 |
The XFP1 link of mc in center side is up |
||
| card_MC_Co_XFP1_Down | 1.3.6.1.4.1.6688.1.1.2.82 |
The XFP1 link of mc in center side is broken |
||
| card_MC_Co_XFP2_Up | 1.3.6.1.4.1.6688.1.1.2.83 |
The XFP2 link of mc in center side is up |
||
| card_MC_Co_XFP2_Down | 1.3.6.1.4.1.6688.1.1.2.84 |
The XFP2 link of mc in center side is broken |
||
| card_MC_Rmt_XFP1_Up | 1.3.6.1.4.1.6688.1.1.2.85 |
The XFP1 link of mc in customer side is up |
||
| card_MC_Rmt_XFP1_Down | 1.3.6.1.4.1.6688.1.1.2.86 |
The XFP link of mc in customer side is broken |
||
| card_MC_Co_SFP3_Inserted | 1.3.6.1.4.1.6688.1.1.2.87 |
Local SFP3 inserted |
||
| card_MC_Co_SFP3_Removed | 1.3.6.1.4.1.6688.1.1.2.88 |
Local SFP3 removed |
||
| card_MC_Co_Port1_Up | 1.3.6.1.4.1.6688.1.1.2.89 |
The Port1 link of mc in center side is up |
||
| card_MC_Co_Port1_Down | 1.3.6.1.4.1.6688.1.1.2.90 |
The Port1 link of mc in center side is broken |
||
| card_MC_Co_Port2_Up | 1.3.6.1.4.1.6688.1.1.2.91 |
The Port2 link of mc in center side is up |
||
| card_MC_Co_Port2_Down | 1.3.6.1.4.1.6688.1.1.2.92 |
The Port2 link of mc in center side is broken |
||
| card_MC_Co_Port3_Up | 1.3.6.1.4.1.6688.1.1.2.93 |
The Port3 link of mc in center side is up |
||
| card_MC_Co_Port3_Down | 1.3.6.1.4.1.6688.1.1.2.94 |
The Port3 link of mc in center side is broken |
||
| card_MC_FAN_Normal | 1.3.6.1.4.1.6688.1.1.2.100 |
Fan card work normally |
||
| card_MC_FAN_Abnormal | 1.3.6.1.4.1.6688.1.1.2.101 |
Fan card work abnormally |
||
| card_MC_Co_QSFP1_Inserted | 1.3.6.1.4.1.6688.1.1.2.102 |
Local QSFP1 inserted |
||
| card_MC_Co_QSFP1_Removed | 1.3.6.1.4.1.6688.1.1.2.103 |
Local QSFP1 removed |
||
| card_MC_Co_QSFP2_Inserted | 1.3.6.1.4.1.6688.1.1.2.104 |
Local QSFP2 inserted |
||
| card_MC_Co_QSFP2_Removed | 1.3.6.1.4.1.6688.1.1.2.105 |
Local QSFP2 removed |
||
| card_MC_Co_QSFP1_Lane1_Up | 1.3.6.1.4.1.6688.1.1.2.106 |
The QSFP1 Lane1 link of mc in center side is up |
||
| card_MC_Co_QSFP1_Lane1_Down | 1.3.6.1.4.1.6688.1.1.2.107 |
The QSFP1 lane1 link of mc in center side is broken |
||
| card_MC_Co_QSFP1_Lane2_Up | 1.3.6.1.4.1.6688.1.1.2.108 |
The QSFP1 Lane2 link of mc in center side is up |
||
| card_MC_Co_QSFP1_Lane2_Down | 1.3.6.1.4.1.6688.1.1.2.109 |
The QSFP1 lane2 link of mc in center side is broken |
||
| card_MC_Co_QSFP1_Lane3_Up | 1.3.6.1.4.1.6688.1.1.2.110 |
The QSFP1 Lane3 link of mc in center side is up |
||
| card_MC_Co_QSFP1_Lane3_Down | 1.3.6.1.4.1.6688.1.1.2.111 |
The QSFP1 lane3 link of mc in center side is broken |
||
| card_MC_Co_QSFP1_Lane4_Up | 1.3.6.1.4.1.6688.1.1.2.112 |
The QSFP1 Lane4 link of mc in center side is up |
||
| card_MC_Co_QSFP1_Lane4_Down | 1.3.6.1.4.1.6688.1.1.2.113 |
The QSFP1 lane4 link of mc in center side is broken |
||
| card_MC_Co_QSFP2_Lane1_Up | 1.3.6.1.4.1.6688.1.1.2.114 |
The QSFP2 Lane1 link of mc in center side is up |
||
| card_MC_Co_QSFP2_Lane1_Down | 1.3.6.1.4.1.6688.1.1.2.115 |
The QSFP2 lane1 link of mc in center side is broken |
||
| card_MC_Co_QSFP2_Lane2_Up | 1.3.6.1.4.1.6688.1.1.2.116 |
The QSFP2 Lane2 link of mc in center side is up |
||
| card_MC_Co_QSFP2_Lane2_Down | 1.3.6.1.4.1.6688.1.1.2.117 |
The QSFP2 lane2 link of mc in center side is broken |
||
| card_MC_Co_QSFP2_Lane3_Up | 1.3.6.1.4.1.6688.1.1.2.118 |
The QSFP2 Lane3 link of mc in center side is up |
||
| card_MC_Co_QSFP2_Lane3_Down | 1.3.6.1.4.1.6688.1.1.2.119 |
The QSFP2 lane3 link of mc in center side is broken |
||
| card_MC_Co_QSFP2_Lane4_Up | 1.3.6.1.4.1.6688.1.1.2.120 |
The QSFP2 Lane4 link of mc in center side is up |
||
| card_MC_Co_QSFP2_Lane4_Down | 1.3.6.1.4.1.6688.1.1.2.121 |
The QSFP2 lane4 link of mc in center side is broken |
||
| card_MC_Rmt_SFP2_Inserted | 1.3.6.1.4.1.6688.1.1.2.122 |
Remote SFP2 inserted |
||
| card_MC_Rmt_SFP2_Removed | 1.3.6.1.4.1.6688.1.1.2.123 |
Remote SFP2 removed |
||
| card_MC_Rmt_SFP3_Inserted | 1.3.6.1.4.1.6688.1.1.2.124 |
Remote SFP3 inserted |
||
| card_MC_Rmt_SFP3_Removed | 1.3.6.1.4.1.6688.1.1.2.125 |
Remote SFP3 removed |
||
| card_MC_Rmt_SFP2_Up | 1.3.6.1.4.1.6688.1.1.2.126 |
The SFP2 link of mc in customer side is up |
||
| card_MC_Rmt_SFP2_Down | 1.3.6.1.4.1.6688.1.1.2.127 |
The SFP2 link of mc in customer side is broken |
||
| card_MC_Rmt_SFP3_Up | 1.3.6.1.4.1.6688.1.1.2.128 |
The SFP3 link of mc in customer side is up |
||
| card_MC_Rmt_SFP3_Down | 1.3.6.1.4.1.6688.1.1.2.129 |
The SFP3 link of mc in customer side is broken |
||
| card_MC_E1_Co_Port1_LOS_Alarm | 1.3.6.1.4.1.6688.1.1.2.130 |
Port1 LOS alarm in center side |
||
| card_MC_E1_Co_Port1_LOS_Normal | 1.3.6.1.4.1.6688.1.1.2.131 |
Port1 LOS normal in center side |
||
| card_MC_E1_Co_Port1_AIS_Alarm | 1.3.6.1.4.1.6688.1.1.2.132 |
Port1 AIS alarm in center side |
||
| card_MC_E1_Co_Port1_AIS_Normal | 1.3.6.1.4.1.6688.1.1.2.133 |
Port1 AIS normal in center side |
||
| card_MC_E1_Co_Port1_CV_Alarm | 1.3.6.1.4.1.6688.1.1.2.134 |
Port1 CV alarm in center side |
||
| card_MC_E1_Co_Port1_CV_Normal | 1.3.6.1.4.1.6688.1.1.2.135 |
Port1 CV normal in center side |
||
| card_MC_E1_Co_Port2_LOS_Alarm | 1.3.6.1.4.1.6688.1.1.2.136 |
Port2 LOS alarm in center side |
||
| card_MC_E1_Co_Port2_LOS_Normal | 1.3.6.1.4.1.6688.1.1.2.137 |
Port2 LOS normal in center side |
||
| card_MC_E1_Co_Port2_AIS_Alarm | 1.3.6.1.4.1.6688.1.1.2.138 |
Port2 AIS alarm in center side |
||
| card_MC_E1_Co_Port2_AIS_Normal | 1.3.6.1.4.1.6688.1.1.2.139 |
Port2 AIS normal in center side |
||
| card_MC_E1_Co_Port2_CV_Alarm | 1.3.6.1.4.1.6688.1.1.2.140 |
Port2 CV alarm in center side |
||
| card_MC_E1_Co_Port2_CV_Normal | 1.3.6.1.4.1.6688.1.1.2.141 |
Port2 CV normal in center side |
||
| card_MC_E1_Rmt_Port1_LOS_Alarm | 1.3.6.1.4.1.6688.1.1.2.142 |
Port1 LOS alarm in customer side |
||
| card_MC_E1_Rmt_Port1_LOS_Normal | 1.3.6.1.4.1.6688.1.1.2.143 |
Port1 LOS normal in customer side |
||
| card_MC_E1_Rmt_Port1_AIS_Alarm | 1.3.6.1.4.1.6688.1.1.2.144 |
Port1 AIS alarm in customer side |
||
| card_MC_E1_Rmt_Port1_AIS_Normal | 1.3.6.1.4.1.6688.1.1.2.145 |
Port1 AIS normal in customer side |
||
| card_MC_E1_Rmt_Port1_CV_Alarm | 1.3.6.1.4.1.6688.1.1.2.146 |
Port1 CV alarm in customer side |
||
| card_MC_E1_Rmt_Port1_CV_Normal | 1.3.6.1.4.1.6688.1.1.2.147 |
Port1 CV normal in customer side |
||
| card_MC_E1_Rmt_Port2_LOS_Alarm | 1.3.6.1.4.1.6688.1.1.2.148 |
Port2 LOS alarm in customer side |
||
| card_MC_E1_Rmt_Port2_LOS_Normal | 1.3.6.1.4.1.6688.1.1.2.149 |
Port2 LOS normal in customer side |
||
| card_MC_E1_Rmt_Port2_AIS_Alarm | 1.3.6.1.4.1.6688.1.1.2.150 |
Port2 AIS alarm in customer side |
||
| card_MC_E1_Rmt_Port2_AIS_Normal | 1.3.6.1.4.1.6688.1.1.2.151 |
Port2 AIS normal in customer side |
||
| card_MC_E1_Rmt_Port2_CV_Alarm | 1.3.6.1.4.1.6688.1.1.2.152 |
Port2 CV alarm in customer side |
||
| card_MC_E1_Rmt_Port2_CV_Normal | 1.3.6.1.4.1.6688.1.1.2.153 |
Port2 CV normal in customer side |
||
| card_MC_Co_SFP3_Up | 1.3.6.1.4.1.6688.1.1.2.154 |
The SFP3 link of mc in center side is up |
||
| card_MC_Co_SFP3_Down | 1.3.6.1.4.1.6688.1.1.2.155 |
The SFP3 link of mc in center side is broken |
||
| card_MC_E1T1_Co_TXLOS_Alarm | 1.3.6.1.4.1.6688.1.1.2.156 |
Tx LOS alarm in center side |
||
| card_MC_E1T1_Co_TXLOS_Normal | 1.3.6.1.4.1.6688.1.1.2.157 |
Tx LOS normal in center side |
||
| card_MC_E1T1_Co_FXLOS_Alarm | 1.3.6.1.4.1.6688.1.1.2.158 |
Fx LOS alarm in center side |
||
| card_MC_E1T1_Co_FXLOS_Normal | 1.3.6.1.4.1.6688.1.1.2.159 |
Fx LOS normal in center side |
||
| card_MC_E1T1_Co_AIS_Alarm | 1.3.6.1.4.1.6688.1.1.2.160 |
AIS alarm in center side |
||
| card_MC_E1T1_Co_AIS_Normal | 1.3.6.1.4.1.6688.1.1.2.161 |
AIS normal in center side |
||
| card_MC_E1T1_Rmt_TXLOS_Alarm | 1.3.6.1.4.1.6688.1.1.2.162 |
Tx LOS alarm in customer side |
||
| card_MC_E1T1_Rmt_TXLOS_Normal | 1.3.6.1.4.1.6688.1.1.2.163 |
Tx LOS normal in customer side |
||
| card_MC_E1T1_Rmt_FXLOS_Alarm | 1.3.6.1.4.1.6688.1.1.2.164 |
Fx LOS alarm in customer side |
||
| card_MC_E1T1_Rmt_FXLOS_Normal | 1.3.6.1.4.1.6688.1.1.2.165 |
Fx LOS normal in customer side |
||
| card_MC_E1T1_Rmt_AIS_Alarm | 1.3.6.1.4.1.6688.1.1.2.166 |
AIS alarm in customer side |
||
| card_MC_E1T1_Rmt_AIS_Normal | 1.3.6.1.4.1.6688.1.1.2.167 |
AIS normal in customer side |
||