XLDV20PM-MIB: View SNMP OID List / Download MIB

VENDOR: SIEMENS


 Home MIB: XLDV20PM-MIB
Download as:   
SNMPv2-CONF, XLDV20-MIB, SNMPv2-SMI, AN-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
             xldv20pmTrThresholdCrossingAlert 1.3.6.1.4.1.231.7.1.2.1.1.4.100.200
Threshold crossing alert for PM on physical layer.
             xldv20pmTrAtmThresholdCrossingAlert 1.3.6.1.4.1.231.7.1.2.1.1.4.100.300
Threshold crossing alert for PM on ATM layer .
             xldv20pmTrAtmObjectCreation 1.3.6.1.4.1.231.7.1.2.1.1.4.100.302
An Atm object is created.
             xldv20pmTrAtmObjectDeletion 1.3.6.1.4.1.231.7.1.2.1.1.4.100.303
An Atm object is deleted.
             xldv20pmTrAtmEndpointObjectCreation 1.3.6.1.4.1.231.7.1.2.1.1.4.100.304
An Atm endpoint object is created.
             xldv20pmTrAtmEndpointObjectDeletion 1.3.6.1.4.1.231.7.1.2.1.1.4.100.305
An Atm endpoint object is deleted.
 xldv20Pm 1.3.6.1.4.1.231.7.1.2.1.1.5
     xldv20pmPerformanceManagementControl 1.3.6.1.4.1.231.7.1.2.1.1.5.1
         xldv20pmControl 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1
             xldv20pmCoIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.1 unsigned16 read-write
This attribute provides the interface index of the PM object for which PM parameters are configured .
             xldv20pmCoNrHistEntriesSize 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.2 integer read-write
This attribute is used to set the number of 15 minutes history entries which should be stored for history collection. Default value is 1.
             xldv20pmCoIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.3 xldv20pmintervaltype read-write
This attribute identifies whether a 15 minutes interval or a day interval is selected in case of a resetIndividCurrent command.
             xldv20pmCoControlReq 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.4 xldv20pmcontrolreq read-write
This attribute identifies a control command given by the SNMP agent. A reset for any individual PM object is possible via command resetIndividCurrent. The command setNrHistEntriesSize is used to set the number of 15 minutes history entries for history collection at a particular interface.
             xldv20pmCoControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.5 xldv20controlstatus read-only
The status of a control request.
             xldv20pmCoRemainingHistoryEntriesSize 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.6 integer read-only
This attribute indicates the number of remaining history entries which are available for the 15 minutes history collection wthin the ONU. PM on physical and ATM layer use the same history memory which is limited in total to 2000 entries. The manager can read this attribute after the execution of the setNrHistEntriesSize command .
             xldv20pmCoOAMLevel 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.7 integer read-write
This attribute selects the OAM level f1 (1), f2 (2), f3 (3) .
             xldv20pmCoControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.8 xldv20pmcontrolreq read-only
The result of the last user command.
             xldv20pmCoControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.5.1.1.9 timeticks read-only
The time stamp of the last command (end of command).
         xldv20pmAtmControl 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2
             xldv20pmAcoIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.1 unsigned16 read-write
This attribute provides the index of the AtmPm object for which PM parameters shall be configured .
             xldv20pmAcoNrHistEntriesSize 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.2 integer read-write
This attribute is used to set the number of 15 minutes history entries which should be stored for history collection. The set HistEntrySize value is found in the xldv20pmAcHistEntrySize.
             xldv20pmAcoIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.3 xldv20pmintervaltype read-write
This attribute identifies whether a 15 minutes interval or a day interval is selected in case of a resetIndividCurrent command.
             xldv20pmAcoControlReq 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.4 xldv20pmcontrolreq read-write
This attribute identifies a control command given by the SNMP agent. A reset for any individual PM object is possible via command resetIndividCurrent. The command setNrHistEntriesSize is used to set the number of 15 minutes history entries for history collection at a particular interface. The commands create/delete are used to create/delete AtmPm monitoring objectes (entry in table xldv20pmAtmObjectsTable). The commands addEndpoint/deleteEndpoint are used to add or delete AtmPm endpoints to/from an PMo monitoring object.
             xldv20pmAcoControlStatus 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.5 xldv20controlstatus read-only
The status of a control request.
             xldv20pmAcoRemainingHistoryEntriesSize 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.6 integer read-only
This attribute indicates the number of remaining history entries which are available for the 15 minutes history collection within the ONU. PM on physical and ATM layer use the same history memory which is limited in total to 2000 entries. Commonly used by PM on physical and ATM layer The manager can read this attribute after the execution of the setNrHistEntriesSize command .
             xldv20pmAcoFlowType 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.7 xldv20pmflowtype read-write
This attribute identifies the flow type : F4 (VP) or F5 (VC) segment or endToEnd flow.
             xldv20pmAcoFlowDirection 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.8 xldv20flowdirection read-write
The flow direction of OAM cells. 'inwards' means flow direction from outside (external interface) to cross connection. 'outwards' means flow direction from inside to external interface.
             xldv20pmAcoConnectionIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.9 integer read-write
This attribute identifies the index of a Vpl or Vcl cross connection.
             xldv20pmAcoConnectionIndexType 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.10 xldv20pmconnectionindextype read-write
This attribute identifies the type of connection index and the termination point. It is in case of vplUni/vplNni : index of Vpl CC (xldv20AccVpiNniIndex) vclUni/vplNni : index of Vcl CC (xldv20VcxIndex).
             xldv20pmAcoRole 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.12 xldv20pmroletype read-write
The role of endpoint. 'analyseWithBackwardReporting' (sink) means extracting forward monitoring (FM) OAM cells, sending back backward reporting OAM cells and no data collection for current and history table. 'analyseWithoutBackwardReporting' (sink) means extracting FM cells without any other OAM handling and also collecting data. 'generateWithCollect' (source) means inserting FM cells, extracting backward reporting cells if they arrive and collect data for current and history table. 'generateWithoutCollect' (source) means inserting FM cells but without collecting data. The CMU, the Ethernet part of the Twin NT s capable of operating as inserting or extracting point.
             xldv20pmAcoEndpointType 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.13 xldv20pmendpointtype read-write
Identifies the type of endpoint.
             xldv20pmAcoControlReqResult 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.14 xldv20pmcontrolreq read-only
The result of the last user command.
             xldv20pmAcoControlTimeStamp 1.3.6.1.4.1.231.7.1.2.1.1.5.1.2.15 timeticks read-only
The time stamp of the last command (end of command).
     xldv20pmPerformanceMonitoring 1.3.6.1.4.1.231.7.1.2.1.1.5.2
         xldv20pmCommonCurrentTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2 no-access
This table contains the entries for the current 15 minute interval or the current day of PMo objects of the common group. (adc, adr, e3n and e3f) .
             xldv20pmCommonCurrentEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1 no-access
An entry describing the Common Current Data Table .
                 xldv20pmCcIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.1 xldv20pmintervaltype read-only
This attribute is used to select between the 15 min or the day accumulation types.
                 xldv20pmCcOAMLevel 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.2 integer read-only
This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) .
                 xldv20pmCcAdminState 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.3 xldv20adminstate read-write
This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min collection object must be activated, before day collection can operate.
                 xldv20pmCcSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.4 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                 xldv20pmCcHistEntrySize 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.5 integer read-only
The number of 15min history entries configured at the particular interface. This attribute is used for history data collection. The default value is 1 and means at least one history entry is desired .
                 xldv20pmCcNrHistEntriesAvailable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.6 integer read-only
This read-only attribute indicates how many HistEntries are already available. The range of values is between 0 and xldv20pmCcHistEntrySize, thereby 0 means that this entry is not valid .
                 xldv20pmCcElapsedTime 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.7 integer read-only
This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute interval is selected or minutes for day interval. (Note: accurate to the sample time interval).
                 xldv20pmCcThresholdLimitIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.8 integer read-write
This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reported by this managed entity. When the value of this attribute is set to 1, default threshold limits shall be used .
                 xldv20pmCcNeErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.9 counter read-only
A near end counter of Errored Seconds (ES) over a 15 min/day interval. Counter appearence depends on interface type and OAM level : - adc, e3n: valid for F3 level .
                 xldv20pmCcFeErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.10 counter read-only
A far end counter of Errored Seconds (ES) over a 15 min /day interval. Counter appearence depends on interface type and OAM level : - adr, e3f: valid for F3 level .
                 xldv20pmCcNeSeverelyErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.11 counter read-only
Represents a near end counter of Severely Errored Seconds (SES) over a 15 min /day interval. Counter appearence depends on interface type and OAM level : - adc, e3n: valid for F3 level .
                 xldv20pmCcFeSeverelyErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.12 counter read-only
This read-only attribute represents a far end counter of Severely Errored Seconds (SES) over a 15 min /day interval. Counter appearence depends on interface type and OAM level : - adr, e3f: valid for F3 level .
                 xldv20pmCcNeBackgroundBlockErrors 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.13 counter read-only
This read-only attribute represents a near end counter for Background Block Errors (BBE) over a 15 min /day interval. Counter appearence depends on interface type and OAM level : - adc, e3n: valid for F3 level .
                 xldv20pmCcFeBackgroundBlockErrors 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.14 counter read-only
This read-only attribute represents a far end counter for Background Block Errors (BBE) over a 15 min /day interval. Counter appearence depends on interface type and OAM level : - adr, e3f: valid for F3 level .
                 xldv20pmCcNeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.15 counter read-only
This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. Counter applicable for : adc, e3n and f3 level .
                 xldv20pmCcFeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.2.1.16 counter read-only
This read-only attribute represents a far end counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. Counter applicable for : adr, e3f and F3 level .
         xldv20pmCommonHistoryTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3 no-access
This table contains the entries for the PMo objects of the 15 min /one day-history data collection results at the respective adc, adr drop area interfaces .
             xldv20pmCommonHistoryEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1 no-access
An entry describing the Common History Data Table .
                 xldv20pmChIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.1 xldv20pmintervaltype read-only
This type attribute is used to select between the 15 min or the day accumulation types.
                 xldv20pmChOAMLevel 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.2 integer read-only
This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) .
                 xldv20pmChHistEntryNr 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.3 integer read-only
This attribute is an index used to address the PM history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20pmCcHistEntrySize .
                 xldv20pmChSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.4 xldv20pmsuspecttype read-only
Will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                 xldv20pmChPeriodEndTime 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.5 integer read-only
Date/time at the end of the selected interval.
                 xldv20pmChNeErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.6 counter read-only
This read-only attribute represents a near end counter of Errored Seconds (ES) over a 15 min /day interval. Counter applicable for : adc, e3n and F3 level .
                 xldv20pmChFeErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.7 counter read-only
This read-only attribute represents a far end counter of Errored Seconds (ES) within the current 15 minute interval or current day. Counter applicable for : adr, e3f and F3 level .
                 xldv20pmChNeSeverelyErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.8 counter read-only
This read-only attribute represents a near end counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day. Counter applicable for : adc, e3n and F3 level .
                 xldv20pmChFeSeverelyErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.9 counter read-only
This read-only attribute represents a far end counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day. Counter applicable for : adr, e3f and F3 level .
                 xldv20pmChNeBackgroundBlockErrors 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.10 counter read-only
This read-only attribute represents a near end counter for Background Block Errors (BBE) over a 15 min /day interval. Counter applicable for : adc, e3n and F3 level .
                 xldv20pmChFeBackgroundBlockErrors 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.11 counter read-only
This read-only attribute represents a far end counter for Background Block Errors (BBE) over a 15 min /day interval. Counter applicable for : adr, e3n and F3 level .
                 xldv20pmChNeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.12 counter read-only
This read-only attribute represents a near end counter of Unavailable Seconds (UAS) for a 15 min /day interval. Counter applicable for : adc, e3n and F3 level .
                 xldv20pmChFeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.3.1.13 counter read-only
This read-only attribute represents a far end counter of Unavailable Seconds (UAS) for a 15 min /day interval. Counter applicable for : adr, e3f and F3 level .
         xldv20pmS3CurrentTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4 no-access
This table contains the entries for the current 15 minute interval or the current day for STS3c near-end and far-end PPTPs.
             xldv20pmS3CurrentEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1 no-access
An entry describing the STS3 near-end and far-end Current Data Table .
                 xldv20pmS3cIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.1 xldv20pmintervaltype read-only
This type attribute is used to select between the 15 min or the day accumulation types.
                 xldv20pmS3cOAMLevel 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.2 integer read-only
This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) .
                 xldv20pmS3cAdminState 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.3 xldv20adminstate read-write
This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min collection object must be activated, before day collection can operate.
                 xldv20pmS3cSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.4 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                 xldv20pmS3cHistEntrySize 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.5 integer read-only
This read-only attribute indicates the number of 15min history entries configured at the particular interface. The default value is 1 and means that at least one history entry is provided .
                 xldv20pmS3cNrHistEntriesAvailable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.6 integer read-only
This read-only attribute indicates how many history entries are already available. The range of values is between 0 and xldv20S3cHistEntrySize, thereby 0 means that this entry is not valid .
                 xldv20pmS3cElapsedTime 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.7 integer read-only
This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute interval is selected or minutes for day interval. (Note: accurate to the sample time interval).
                 xldv20pmS3cThresholdLimitIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.8 integer read-write
This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reported by this managed entity. When the value of this attribute is set to 1, default threshold limits shall be used The range of values is [1,30].
                 xldv20pmS3cNeErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.9 counter read-only
This read-only attribute represents a counter of Errored Seconds (ES) within the current 15min interval or current day. Counter applicable for : s3n and F1, F2, F3 levels .
                 xldv20pmS3cFeErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.10 counter read-only
This read-only attribute represents a counter of Errored Seconds (ES) within the current 15min interval or current day. Counter applicable for : s3f and F2 and F3 levels .
                 xldv20pmS3cNeSeverelyErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.11 counter read-only
This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15min interval or current day. Counter applicable for : s3n and F2 and F3 levels .
                 xldv20pmS3cFeSeverelyErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.12 counter read-only
This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15min interval or current day. Counter applicable for : s3f and for F2 and F3 levels .
                 xldv20pmS3cNeCodeViolations 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.13 counter read-only
This read-only attribute represents a counter of Code Violations Errors within the current 15min interval or current day. Counter applicable for : s3n and F1, F2, F3 levels .
                 xldv20pmS3cFeCodeViolations 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.14 counter read-only
This read-only attribute represents a counter of Code Violations Errors within the current 15min interval or current day. Counter applicable for : s3f and F2 and F3 levels .
                 xldv20pmS3cNeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.15 counter read-only
This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15min interval or current day. Counter applicable for : s3n and F2 and F3 levels .
                 xldv20pmS3cFeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.16 counter read-only
This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15min interval or current day. Counter applicable for : s3f and level F2 and F3 .
                 xldv20pmS3cNeSeverelyErroredFrameSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.4.1.17 counter read-only
This read-only attribute represents a counter of Severely Errored Frame Seconds within the current 15min interval or current day. Counter applicable for : s3n and F1 level only.
         xldv20pmS3HistoryTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5 no-access
This table contains the entries for the PMo history objects at the near-end and far-end STS3c interfaces. It contains results that are overtaken from the s3CurrentTable PM-object at the end of a 15 min /day interval .
             xldv20pmS3HistoryEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1 no-access
An entry describing the STS3 near-end and far-end History Data Table .
                 xldv20pmS3hIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.1 xldv20pmintervaltype read-only
This type attribute is used to select between the 15 min or the day accumulation types.
                 xldv20pmS3hOAMLevel 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.2 integer read-only
This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) .
                 xldv20pmS3hHistEntryNr 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.3 integer read-only
This attribute is used as index to address the history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20S3cHistEntrySize .
                 xldv20pmS3hSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.4 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                 xldv20pmS3hPeriodEndTime 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.5 integer read-only
This read-only attribute is a record of date/time at the end of an interval .
                 xldv20pmS3hNeErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.6 counter read-only
This read-only attribute represents a set of history counter for Errored Seconds (ES) for the passed up to 96 periods of 15 minutes and the passed day interval. Counter applicable for : s3n and F1, F2, F3 levels .
                 xldv20pmS3hFeErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.7 counter read-only
This read-only attribute represents a set of history counter for Errored Seconds (ES) for the passed up to 96 periods of 15 minutes and the passed day interval. Counter applicable for : s3f and F2 and F3 levels .
                 xldv20pmS3hNeSeverelyErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.8 counter read-only
This read-only attribute represents a set of history counter for Severely Errored Seconds (SES) for the passed up to 96 periods of 15 minutes and the passed day interval. Counter applicable for : s3n and F2 and F3 levels .
                 xldv20pmS3hFeSeverelyErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.9 counter read-only
This read-only attribute represents a set of history counter for Severely Errored Seconds (SES) for the passed up to 96 periods of 15 minutes and the passed day interval. Counter applicable for : s3f and F2 and F3 levels .
                 xldv20pmS3hNeCodeViolations 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.10 counter read-only
This read-only attribute represents a set of history counter for Code Violations Errors for the passed up to 96 periods of 15 minutes and the passed day interval. Counter applicable for : s3n and F1, F2, F3 levels .
                 xldv20pmS3hFeCodeViolations 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.11 counter read-only
This read-only attribute represents a set of history counter for Code Violations Errors for the passed up to 96 periods of 15 minutes and the passed day interval. Counter applicable for : s3f and F2 and F3 levels .
                 xldv20pmS3hNeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.12 counter read-only
This read-only attribute represents a set of history counter for Unavailable Seconds (UAS) for the passed up to 96 periods of 15 minutes and the passed day interval. Counter applicable for : s3n and F2 and F3 levels .
                 xldv20pmS3hFeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.13 counter read-only
This read-only attribute represents a set of history counter for Unavailable Seconds (UAS) for the passed up to 96 periods of 15 minutes and the passed day interval. Counter applicable for : s3f and F2 and F3 levels .
                 xldv20pmS3hNeSeverelyErroredFrameSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.5.1.14 counter read-only
This read-only attribute represents a set of history counter for Severely Errored Frame Seconds for the passed up to 96 periods of 15 minutes and the passed day interval. Counter applicable for : s3n and F1 level only .
         xldv20pmD3CurrentTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6 no-access
This table contains the entries for the current 15 minute interval or the current day for DS3 near-end and far-end PPTPs. Note: Day PM collection uses the 15min interval results .
             xldv20pmD3CurrentEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1 no-access
An entry describing the DS3 near-end and far-end Current Data Table .
                 xldv20pmD3cIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.1 xldv20pmintervaltype read-only
This type attribute is used to select between the 15 min or the day accumulation types.
                 xldv20pmD3cOAMLevel 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.2 integer read-only
This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) .
                 xldv20pmD3cAdminState 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.3 xldv20adminstate read-write
This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min collection object must be activated, before day collection can operate.
                 xldv20pmD3cSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.4 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                 xldv20pmD3cHistEntrySize 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.5 integer read-only
This read-only attribute indicates the configured history size. The default value is 1 and means that at least one history entry is provided.
                 xldv20pmD3cNrHistEntriesAvailable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.6 integer read-only
This read-only attribute indicates how many history entries are already available. The range of values is between 0 and xldv20pmD3cHistEntrySize, thereby 0 means that this entry is not valid .
                 xldv20pmD3cElapsedTime 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.7 integer read-only
This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute interval is selected or minutes for day interval. (Note: accurate to the sample time interval).
                 xldv20pmD3cThresholdLimitIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.8 integer read-write
This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reported by this managed entity. When the value of this attribute is set to 1, default threshold limits shall be used. These default values are not part of the threshold limit table but are hard coded in the application SW of PM. The range of values is [1,30].
                 xldv20pmD3cNeErroredSecondsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.9 counter read-only
This read-only attribute represents a counter of Errored Seconds (ES) within the current interval or current day, the generation thereof is based on CP-bit parity. Counter applicable for : d3n and F2 level only .
                 xldv20pmD3cFeErroredSecondsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.10 counter read-only
This read-only attribute represents a counter of Errored Seconds (ES) within the current 15 minute interval or current day, the generation thereof is based on CP-bit parity . Counter applicable for : d3f and F2 level only .
                 xldv20pmD3cNeErroredSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.11 counter read-only
This read-only attribute represents a counter of Errored Seconds on PLCP-bit parity within the current 15 minute interval or current day. Counter applicable for : d3n and F3 level only .
                 xldv20pmD3cFeErroredSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.12 counter read-only
This read-only attribute represents a counter of Errored Seconds on PLCP-bit parity within the current 15 minute interval or current day. Counter applicable for : d3f and F3 level only .
                 xldv20pmD3cNeSeverelyErroredSecondsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.13 counter read-only
This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day based on CP-bit parity, the generation thereof is based on CP-bit parity. Counter applicable for : d3n and F2 level only .
                 xldv20pmD3cFeSeverelyErroredSecondsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.14 counter read-only
This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day, the generation thereof is based on CP-bit parity . Counter applicable for : d3f and F2 level only .
                 xldv20pmD3cNeSeverelyErroredSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.15 counter read-only
This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day, the generation thereof is based on PLCP-bit parity . Counter applicable for : d3n and F3 level only .
                 xldv20pmD3cFeSeverelyErroredSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.16 counter read-only
This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day, the generation thereof is based on PLCP-bit parity . Counter applicable for : d3f and F3 level only .
                 xldv20pmD3cNeCodeViolationsP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.17 counter read-only
This read-only attribute represents a counter of Code Violations Errors (Count of P-bit parity errors) within the current 15 minute interval or current day. Counter applicable for : d3n and F2 level only .
                 xldv20pmD3cNeCodeViolationsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.18 counter read-only
This read-only attribute represents a counter of Code Violations Errors (Count of CP-bit parity errors) within the current 15 minute interval or current day. Counter applicable for : d3n and F2 level only .
                 xldv20pmD3cFeCodeViolationsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.19 counter read-only
This read-only attribute represents a counter of Code Violations Errors (Count of CP-bit parity errors) within the current 15 minute interval or current day. Counter applicable for : d3f and F2 level only .
                 xldv20pmD3cNeCodeViolationsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.20 counter read-only
This read-only attribute represents a counter of Code Violations Errors (Count of PLCP frame Bit Interleaved Parity errors) within the current 15 minute interval or current day. Counter applicable for : d3n and F3 level only .
                 xldv20pmD3cFeCodeViolationsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.21 counter read-only
This read-only attribute represents a counter of Code Violations Errors (Count of PLCP frame Bit Interleaved Parity errors) within the current 15 minute interval or current day. Counter applicable for : d3f and F3 level only .
                 xldv20pmD3cNeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.22 counter read-only
This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. Counter applicable for : d3n and F2 level only.
                 xldv20pmD3cFeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.23 counter read-only
This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. Counter applicable for : d3f and F2 level only .
                 xldv20pmD3cNeUnavailableSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.24 counter read-only
This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. The generation is based on PLCP-bit parity. Counter applicable for : d3n and F3 level only .
                 xldv20pmD3cFeUnavailableSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.25 counter read-only
This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. The generation is based on PLCP-bit parity. Counter applicable for : d3f and F3 level only .
                 xldv20pmD3cNeSas 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.26 counter read-only
This read-only attribute represents a counter of one second intervals containing one ore more Severely Errored Frame (SEF) defects or one or more Alarm Indication Signal (AIS) defects within the current 15 minute interval or current day. Counter applicable for : d3n and F2 level only .
                 xldv20pmD3cFeSas 1.3.6.1.4.1.231.7.1.2.1.1.5.2.6.1.27 counter read-only
This read-only attribute represents a counter of one second intervals containing one ore more Severely Errored Frame (SEF) defects or one or more Alarm Indication Signal (AIS) defects within the current 15 minute interval or current day. Counter applicable for : d3f and F2 level only .
         xldv20pmD3HistoryTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7 no-access
This table contains the entries for the PMo history objects at the near-end and far-end DS3 interfaces. It contains results that are overtaken from the D3CurrentTable PM-object at the end of a 15 min /day interval .
             xldv20pmD3HistoryEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1 no-access
An entry describing the DS3 near-end and far-end History Data Table .
                 xldv20pmD3hIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.1 xldv20pmintervaltype read-only
This type attribute is used to select between the 15 min or the day accumulation types.
                 xldv20pmD3hOAMLevel 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.2 integer read-only
This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) .
                 xldv20pmD3hHistEntryNr 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.3 integer read-only
This attribute is used as index to address a history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20pmD3cHistEntrySize .
                 xldv20pmD3hSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.4 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                 xldv20pmD3hPeriodEndTime 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.5 integer read-only
This read-only attribute is a record of date/time at the end of an interval .
                 xldv20pmD3hNeErroredSecondsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.6 counter read-only
This read-only attribute represents a set of history counter of Errored Seconds (ES), the generation thereof is based on CP-bit parity for a 15min /day interval. Counter applicable for : d3n and F2 level only .
                 xldv20pmD3hFeErroredSecondsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.7 counter read-only
This read-only attribute represents a set of history counter of Errored Seconds (ES), the generation thereof is based on CP-bit parity for a 15min /day interval. Counter applicable for : d3f and F2 level only .
                 xldv20pmD3hNeErroredSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.8 counter read-only
This read-only attribute represents a set of history counter of Errored Seconds (ES) (One second interval in which Code Violations errors occure) for a 15min /day interval. Counter applicable for : d3n and F3 level only .
                 xldv20pmD3hFeErroredSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.9 counter read-only
This read-only attribute represents a set of history counter of Errored Seconds (ES) (One second interval in which Code Violations errors occure) for a 15min /day interval. Counter applicable for : d3f and F3 level only .
                 xldv20pmD3hNeSeverelyErroredSecondsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.10 counter read-only
This read-only attribute represents a set of history counter of Severely Errored Seconds (ES), the generation thereof is based on CP-bit parity for a 15min /day interval. Counter applicable for : d3n and F2 level only .
                 xldv20pmD3hFeSeverelyErroredSecondsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.11 counter read-only
This read-only attribute represents a set of history counter of Severely Errored Seconds (ES), the generation thereof is based on CP-bit parity for a 15min /day interval. Counter applicable for : d3f and F2 level only .
                 xldv20pmD3hNeSeverelyErroredSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.12 counter read-only
This read-only attribute represents a set of history counter of Severely Errored Seconds (SES) for a 15min / day interval. Counter applicable for : d3n and F3 level only .
                 xldv20pmD3hFeSeverelyErroredSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.13 counter read-only
This read-only attribute represents a set of history counter of Severely Errored Seconds (SES) for a 15min / day interval. Counter applicable for : d3f and F3 level only .
                 xldv20pmD3hNeCodeViolationsP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.14 counter read-only
This read-only attribute represents a counter of Code Violations Errors (Count of P-bit parity errors) for a 15 min /day interval. Counter applicable for : d3n and F2 level only.
                 xldv20pmD3hNeCodeViolationsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.15 counter read-only
This read-only attribute represents a set of history counter of Code Violations Errors (Count of CP-bit parity errors) for a 15min /day interval. Counter applicable for : d3n and F2 level only .
                 xldv20pmD3hFeCodeViolationsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.16 counter read-only
This read-only attribute represents a set of history counter of Code Violations Errors (Count of CP-bit parity errors) for a 15min /day interval. Counter applicable for : d3f and F2 level only .
                 xldv20pmD3hNeCodeViolationsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.17 counter read-only
This read-only attribute represents a set of history counter of Code Violations Errors (Count of PLCP frame Bit Interleaved Parity errors) for a 15min /day interval. Counter applicable for : d3n and F3 level only .
                 xldv20pmD3hFeCodeViolationsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.18 counter read-only
This read-only attribute represents a set of history counter of Code Violations Errors (Count of PLCP frame Bit Interleaved Parity errors) for a 15min /day interval. Counter applicable for : d3f and F3 level only .
                 xldv20pmD3hNeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.19 counter read-only
This read-only attribute represents a set of history counter of Unavailable Seconds (UAS) for a 15min /day interval. Counter applicable for : d3n and F2 level only .
                 xldv20pmD3hFeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.20 counter read-only
This read-only attribute represents a set of history counter of Unavailable Seconds (UAS) for a 15min /day interval. Counter applicable for : d3f and F2 level only .
                 xldv20pmD3hNeUnavailableSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.21 counter read-only
This read-only attribute represents a set of history counter of Unavailable Seconds (UAS) for a 15min /day interval. Counter applicable for : d3n and F3 level only .
                 xldv20pmD3hFeUnavailableSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.22 counter read-only
This read-only attribute represents a set of history counter of Unavailable Seconds (UAS) for a 15min /day interval. Counter applicable for : d3f and F3 level only .
                 xldv20pmD3hNeSas 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.23 counter read-only
This read-only attribute represents a set of history counter of one second intervals containing one ore more Severely Errored Frame (SEF) defects or one or more Alarm Indication Signal (AIS) defects for a 15min /day interval. Counter applicable for : d3n and F2 level only .
                 xldv20pmD3hFeSas 1.3.6.1.4.1.231.7.1.2.1.1.5.2.7.1.24 counter read-only
This read-only attribute represents a set of history counter of one second intervals containing one ore more Severely Errored Frame (SEF) defects or one or more Alarm Indication Signal (AIS) defects for a 15min /day interval. Counter applicable for : d3f and F2 level only .
         xldv20pmS1CurrentTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8 no-access
This table contains the entries for the current 15 minute interval or the current day for STM1 near-end and far-end PPTPs. Note: Day PM collection uses the 15min interval results .
             xldv20pmS1CurrentEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1 no-access
An entry describing the Stm1 Current Data Table .
                 xldv20pmS1cIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.1 xldv20pmintervaltype read-only
This type attribute is used to select between the 15 min or the day accumulation types.
                 xldv20pmS1cOAMLevel 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.2 integer read-only
This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) .
                 xldv20pmS1cAdminState 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.3 xldv20adminstate read-write
This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min collection object must be activated, before day collection can operate.
                 xldv20pmS1cSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.4 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                 xldv20pmS1cHistEntrySize 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.5 integer read-only
This read-only attribute indicates the configured history size. The default value is 1 and means that at least one history entry is provided.
                 xldv20pmS1cNrHistEntriesAvailable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.6 integer read-only
This read-only attribute indicates how many history entries are already available. The range of values is between 0 and xldv20pmS1cHistEntrySize, thereby 0 means that this entry is not valid .
                 xldv20pmS1cElapsedTime 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.7 integer read-only
This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute interval is selected or minutes for day interval. (Note: accurate to the sample time interval).
                 xldv20pmS1cThresholdLimitIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.8 integer read-write
This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reported by this managed entity. When the value of this attribute is set to 1, default threshold limits shall be used. These default values are not part of the threshold limit table but are hard coded in the application SW of PM.
                 xldv20pmS1cNeErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.9 counter read-only
This read-only attribute represents a counter of Errored Seconds (ES) within the current 15 minute interval or current day. Counter applicable for : s1n and F1, F2, F3 levels .
                 xldv20pmS1cFeErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.10 counter read-only
This read-only attribute represents a counter of Errored Seconds (ES) within the current 15 minute interval or current day. Counter applicable for : s1f and F2 and F3 levels .
                 xldv20pmS1cNeSeverelyErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.11 counter read-only
This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day. Counter applicable for : s1n and F1, F2, F3 levels .
                 xldv20pmS1cFeSeverelyErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.12 counter read-only
This read-only attribute represents a counter of Severely Errored Seconds (SES) within the current 15 minute interval or current day. Counter applicable for : s1f and F2 and F3 levels .
                 xldv20pmS1cNeBackgroundBlockErrors 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.13 counter read-only
This read-only attribute represents a counter for Background Block Errors (BBE) within the current 15 minute interval or current day. Counter applicable for : s1n and F1, F2, F3 levels .
                 xldv20pmS1cFeBackgroundBlockErrors 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.14 counter read-only
This read-only attribute represents a counter for Background Block Errors (BBE) within the current 15 minute interval or current day. Counter applicable for : s1f and F2 and F3 levels .
                 xldv20pmS1cNeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.15 counter read-only
This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. Counter applicable for : s1n and F1, F2, F3 levels .
                 xldv20pmS1cFeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.16 counter read-only
This read-only attribute represents a counter of Unavailable Seconds (UAS) within the current 15 minute interval or current day. Counter applicable for : s1f and F2 and F3 levels .
                 xldv20pmS1cNeOfsSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.17 counter read-only
This read-only attribute represents a counter of Errored Seconds on defect OFS within the current 15 minute interval or current day. Counter applicable for : s1n and level F1 .
                 xldv20pmS1cNeAisSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.18 counter read-only
This read-only attribute represents a counter of errored Seconds on defect alarm indicatin signal AIS for a 15 min /day interval. Counter applicable for : s1n and F2 .
                 xldv20pmS1cNeLosSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.8.1.19 counter read-only
This read-only attribute represents a counter of errored Seconds on defect LOS within the current 15 minute interval or current day. Counter applicable for : s1n and level F1.
         xldv20pmS1HistoryTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9 no-access
This table contains the entries for the PMo objects of the 15 min /one day-history data collection results at the respective stm1 (s1n, s1f) drop area interfaces .
             xldv20pmS1HistoryEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1 no-access
An entry describing the S1 History Data Table .
                 xldv20pmS1hIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.1 xldv20pmintervaltype read-only
This type attribute is used to select between the 15 min or the day accumulation types.
                 xldv20pmS1hOAMLevel 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.2 integer read-only
This attribute is used to select between the 3 OAM levels f1 (1), f2 (2) and f3 (3) .
                 xldv20pmS1hHistEntryNr 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.3 integer read-only
This attribute is used as index to address a history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20pmCcHistEntrySize .
                 xldv20pmS1hSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.4 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                 xldv20pmS1hPeriodEndTime 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.5 integer read-only
Date/time at the end of the selected interval.
                 xldv20pmS1hNeErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.6 counter read-only
This read-only attribute represents a counter of Errored Seconds (ES) over a 15 min /day interval. Counter applicable for : s1n and F1, F2, F3 levels .
                 xldv20pmS1hFeErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.7 counter read-only
This read-only attribute represents a counter of Errored Seconds (ES) over a 15 min /day interval. Counter applicable for : s1f and F2 and F3 levels .
                 xldv20pmS1hNeSeverelyErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.8 counter read-only
This read-only attribute represents a counter of Severely Errored Seconds (SES) over a 15 min /day interval. Counter applicable for : s1n and F1, F2, F3 levels .
                 xldv20pmS1hFeSeverelyErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.9 counter read-only
This read-only attribute represents a counter of Severely Errored Seconds (SES) over a 15 min /day interval. Counter applicable for : s1f and F2 and F3 levels .
                 xldv20pmS1hNeBackgroundBlockErrors 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.10 counter read-only
This read-only attribute represents a counter for Background Block Errors (BBE) over a 15 min /day interval. Counter applicable for : s1n and F1, F2, F3 levels .
                 xldv20pmS1hFeBackgroundBlockErrors 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.11 counter read-only
This read-only attribute represents a counter for Background Block Errors (BBE) over a 15 min /day interval. Counter applicable for : s1f and F2 and F3 levels .
                 xldv20pmS1hNeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.12 counter read-only
This read-only attribute represents a counter of Unavailable Seconds (UAS) for a 15 min /day interval. Counter applicable for : s1n and F1, F2, F3 levels .
                 xldv20pmS1hFeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.13 counter read-only
This read-only attribute represents a counter of Unavailable Seconds (UAS) for a 15 min /day interval. Counter applicable for : s1f and F2 and F3 levels .
                 xldv20pmS1hNeOfsSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.14 counter read-only
This read-only attribute represents a counter of Errored Seconds on defect OFS for a 15 min /day interval. Counter applicable for : s1n and level F1 .
                 xldv20pmS1hNeAisSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.15 counter read-only
This read-only attribute represents a counter of errored Seconds on defect alarm indicatin signal AIS for a 15 min /day interval. Counter applicable for : s1n and level F2 .
                 xldv20pmS1hNeLosSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.2.9.1.16 counter read-only
This read-only attribute represents a counter of errored Seconds on defect LOS for a 15 min /day interval. Counter applicable for : s1n and F1 .
         xldv20pmAtmObjectsTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.10 no-access
This table contains the entries for the PMo objects on ATM layer. Maximum of monitored connections is 128.
               xldv20pmAtmObjectsEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.10.1 no-access
An entry of the xldv20pmAtmObjectsTable.
                   xldv20pmAoIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.2.10.1.1 integer read-only
Identifies an entry of the xldv20pmAtmObjectsTable.
                   xldv20pmAoFlowType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.10.1.2 xldv20pmflowtype read-only
This attribute identifies the flow type : F4 (VP) or F5 (VC) segment or endToEnd flow.
                   xldv20pmAoAdminState 1.3.6.1.4.1.231.7.1.2.1.1.5.2.10.1.3 xldv20adminstate read-write
This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min collection object must be activated, before day collection can operate.
                   xldv20pmAoBlockSize 1.3.6.1.4.1.231.7.1.2.1.1.5.2.10.1.4 xldv20pmblocksizetype read-write
This is the number of user cells after which PMo cell is inserted. Default is 128.
         xldv20pmAtmEndpointsTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.11 no-access
This table contains the enpoints for PMo on Atm layer.
               xldv20pmAtmEndpointsEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.11.1 no-access
An entry of xldv20pmAtmEndpointsTable.
                   xldv20pmAeEndpointType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.11.1.1 xldv20pmendpointtype read-only
Identifies the type of endpoint.
                   xldv20pmAeConnectionIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.2.11.1.2 integer read-only
This attribute identifies the Vpl or Vcl cross connection where an endpoint object should be added.
                   xldv20pmAeConnectionIndexType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.11.1.3 xldv20pmconnectionindextype read-only
This attribute identifies the type of connection index and the termination point where an endpoint should be added.
                   xldv20pmAeRole 1.3.6.1.4.1.231.7.1.2.1.1.5.2.11.1.4 xldv20pmroletype read-only
The role of endpoint. 'analyseWithBackwardReporting' (sink) means extracting forward monitoring (FM) OAM cells, sending back backward reporting OAM cells and no data collection for current and history table. 'analyseWithoutBackwardReporting' (sink) means extracting FM cells and also collecting data. 'generateWithCollect' (source) means inserting FM cells, extracting backward reporting cells if they arrive and collect data for current and history table. 'generateWithoutCollect' (source) means inserting FM cells but without collecting data. The CMU, the Ethernet part of the Twin NT can be inserting and extracting points.
                   xldv20pmAeFlowDirection 1.3.6.1.4.1.231.7.1.2.1.1.5.2.11.1.5 xldv20flowdirection read-only
This attribute identifies the flow direction. inwards means flow direction from outside (external interface) to cross connection. outwards means flow direction from inside to external interface.
         xldv20pmAtmCurrentTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12 no-access
This table contains the entries for the the PMo objects for the current data of Pmo monitoring objects on ATM layer. It includes attributes for performance parameters, collection interval is 15 minutes and one day .
               xldv20pmAtmCurrentEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1 no-access
An entry describing the Atm Current Data Table .
                   xldv20pmAcIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.1 xldv20pmintervaltype read-only
This type attribute is used to select between the 15 min or the day accumulation types.
                   xldv20pmAcAdminState 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.2 xldv20adminstate read-write
This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min collection object must be activated, before day collection can operate.
                   xldv20pmAcSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.3 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                   xldv20pmAcHistEntrySize 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.4 integer read-only
This is the configured size of history.
                   xldv20pmAcNrHistEntriesAvailable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.5 integer read-only
This is the number of history entries which are available in the history table.
                   xldv20pmAcElapsedTime 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.6 integer read-only
This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute interval is selected or minutes for day interval. (Note: accurate to the sample time interval).
                   xldv20pmAcThresholdLimitIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.7 integer read-write
This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reported by this managed entity. When the value of this attribute is set to 1, default threshold limits shall be used .
                   xldv20pmAcTransmittedUserCells 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.8 counter read-only
This read-only attribute represents a counter of transmitted user cells for a 15 min /day interval.
                   xldv20pmAcLostUserCells 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.9 counter read-only
This read-only attribute represents a counter of lost user cells for a 15 min /day interval.
                   xldv20pmAcMisinsertedUserCells 1.3.6.1.4.1.231.7.1.2.1.1.5.2.12.1.10 counter read-only
This read-only attribute represents a counter of Misinserted user cells for a 15 min /day interval.
         xldv20pmAtmHistoryTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13 no-access
This table contains the entries for the 15 min /one day-history data collection results for PMo objects of ATM layer.
               xldv20pmAtmHistoryEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1 no-access
An entry describing the History Data Table for PMo on ATM layer.
                   xldv20pmAhIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1.1 xldv20pmintervaltype read-only
This type attribute is used to select between the 15 min or the day accumulation types.
                   xldv20pmAhHistEntryNr 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1.2 integer read-only
This attribute is used as index to address a history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20pmAcHistEntrySize .
                   xldv20pmAhSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1.3 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                   xldv20pmAhPeriodEndTime 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1.4 integer read-only
Date/time at the end of the selected interval.
                   xldv20pmAhTransmittedUserCells 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1.5 counter read-only
This read-only attribute represents a counter of transmitted user cells for a 15 min /day interval.
                   xldv20pmAhLostUserCells 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1.6 counter read-only
This read-only attribute represents a counter of lost user cells for a 15 min /day interval.
                   xldv20pmAhMisinsertedUserCells 1.3.6.1.4.1.231.7.1.2.1.1.5.2.13.1.7 counter read-only
This read-only attribute represents a counter of Misinserted user cells for a 15 min /day interval.
         xldv20pmImaGroupCurrentTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14 no-access
This table contains the entries for the PMo objects for the current data of Pmo monitoring objects for IMA groups . Collection interval is the current 15 minute and one the current day .
               xldv20pmImaGroupCurrentEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1 no-access
An entry describing the current PMo data for ImaGroups.
                   xldv20pmImaGroupCurrentIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.1 xldv20pmintervaltype read-only
This type attribute is used to select between the 15 min or the day accumulation types.
                   xldv20pmImaGroupCurrentAdminState 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.2 xldv20adminstate read-write
This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min collection object must be activated, before day collection can operate.
                   xldv20pmImaGroupCurrentSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.3 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                   xldv20pmImaGroupCurrentHistEntrySize 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.4 integer read-only
This is the configured size of history.
                   xldv20pmImaGroupCurrentNrHistEntriesAvailable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.5 integer read-only
This is the number of history entries which are available in the history table.
                   xldv20pmImaGroupCurrentElapsedTime 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.6 integer read-only
This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute interval is selected or minutes for day interval. (Note: accurate to the sample time interval).
                   xldv20pmImaGroupCurrentThresholdLimitIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.7 integer read-write
This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reported by this managed entity. When the value of this attribute is set to 1, default threshold limits shall be used .
                   xldv20pmImaGroupCurrentUnavailSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.8 gauge read-only
The counts of second intervals where the IMA group traffic state machine is down in the current for a 15 min /day interval.
                   xldv20pmImaGroupCurrentNeNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.5.2.14.1.9 gauge read-only
The number of times a near-end group failure (config-Aborted, unsufficient-Links) has been reported for a 15 min /day interval.
         xldv20pmImaGroupHistoryTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15 no-access
This table contains the entries for the 15 min /one day-history data collection results for PMo objects of IMA Group interfaces.
               xldv20pmImaGroupHistoryEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15.1 no-access
An entry describing the History Data Table for PMo IMA groups.
                   xldv20pmImaGroupHistoryIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15.1.1 xldv20pmintervaltype read-only
This type attribute is used to select between the 15 min or the day accumulation types.
                   xldv20pmImaGroupHistoryHistEntryNr 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15.1.2 integer read-only
This attribute is used as index to address a history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20pmImaGroupCurrentHistEntrySize .
                   xldv20pmImaGroupHistorySuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15.1.3 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                   xldv20pmImaGroupHistoryPeriodEndTime 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15.1.4 integer read-only
Date/time at the end of the selected interval.
                   xldv20pmImaGroupHistoryUnavailSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15.1.5 gauge read-only
The counts of second intervals where the IMA group traffic state machine is down in the current 15 min /day interval.
                   xldv20pmImaGroupHistoryNeNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.5.2.15.1.6 gauge read-only
The number of times a near-end group failure (config-Aborted, unsufficient-Links) has been reported for a previous 15 min interval or the previous day.
         xldv20pmImaLinkCurrentTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16 no-access
This table contains the entries for the the PMo objects for the current data of Pmo monitoring objects for IMA groups . It includes attributes for performance parameters, collection interval is 15 minutes and one day .
               xldv20pmImaLinkCurrentEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1 no-access
An entry describing the current PMo data for ImaLinks.
                   xldv20pmImaLinkCurrentIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.1 xldv20pmintervaltype read-only
This type attribute is used to select between the 15 min or the day accumulation types.
                   xldv20pmImaLinkCurrentAdminState 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.2 xldv20adminstate read-write
This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min collection object must be activated, before day collection can operate.
                   xldv20pmImaLinkCurrentSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.3 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                   xldv20pmImaLinkCurrentHistEntrySize 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.4 integer read-only
This is the configured size of history.
                   xldv20pmImaLinkCurrentNrHistEntriesAvailable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.5 integer read-only
This is the number of history entries which are available in the history table.
                   xldv20pmImaLinkCurrentElapsedTime 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.6 integer read-only
This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute interval is selected or minutes for day interval. (Note: accurate to the sample time interval).
                   xldv20pmImaLinkCurrentThresholdLimitIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.7 integer read-write
This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reported by this managed entity. When the value of this attribute is set to 1, default threshold limits shall be used .
                   xldv20pmImaLinkCurrentImaViolations 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.8 gauge read-only
ICP violations: count of errored, invalid or missing ICP cells, except during SES-IMA or UAS-IMA conditions, in the current 15 minute interval. ATM Forum IMA v1.1, (R-125) and (O-26) in Section 12.2.2.2 on page 77.
                   xldv20pmImaLinkCurrentOifAnomalies 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.9 gauge read-only
The number of OIF anomalies, except during SES-IMA or UAS-IMA conditions, at the near-end in the current 15 minute interval. This is an optional attribute. ATM Forum IMA v1.1, (O-20) and (O-26) in Section 12.2.2.2 on page 77
                   xldv20pmImaLinkCurrentNeSevErroredSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.10 gauge read-only
Count of one second intervals containing >= 30% of the ICP cells counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA condition, in the current 15 minute interval. ATM Forum IMA v1.1, (R-126) and (O-26) in Section 12.2.2.2 on page 77
                   xldv20pmImaLinkCurrentFeSevErroredSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.11 gauge read-only
Count of unavailable seconds at near-end in the current 15 minute interval: unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset of 10 contiguous seconds with no SES-IMA. ATM Forum IMA v1.1, (R-128) and (O-26) in Section 12.2.2.2 on page 77
                   xldv20pmImaLinkCurrentNeUnavailSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.12 gauge read-only
Count of unavailable seconds at near-end in the current 15 minute interval: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset of 10 contiguous seconds with no SES-IMA-FE. ATM Forum IMA v1.1, (R-129) and (O-26) in Section 12.2.2.2 on page 77 .
                   xldv20pmImaLinkCurrentFeUnavailSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.13 gauge read-only
Count of unavailable seconds at far-end in the current 15 minute interval: unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset of 10 contiguous seconds with no SES-IMA-FE. ATM Forum IMA v1.1, (R-129) and (O-26) in Section 12.2.2.2 on page 77 .
                   xldv20pmImaLinkCurrentNeTxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.14 gauge read-only
Tx Unusable seconds: count of Unusable seconds at the near-end Tx LSM in the current 15 minute interval. ATM Forum IMA v1.1, (R-130) and (O-26) in Section 12.2.2.2 on page 77.
                   xldv20pmImaLinkCurrentNeRxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.15 gauge read-only
Rx Unusable seconds: count of Unusable seconds at the near-end Rx LSM in the current 15 minute interval. ATM Forum IMA v1.1, (R-131) and (O-26) in Section 12.2.2.2 on page 77.
                   xldv20pmImaLinkCurrentFeTxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.16 gauge read-only
Tx Unusable seconds: count of Unusable seconds at the far-end Tx LSM in the current 15 minute interval. ATM Forum IMA v1.1, (R-132) and (O-26) in Section 12.2.2.2 on page 77.
                   xldv20pmImaLinkCurrentFeRxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.17 gauge read-only
Rx Unusable seconds: count of Unusable seconds at the far-end Rx LSM in the current 15 minute interval. ATM Forum IMA v1.1, (R-133) and (O-26) in Section 12.2.2.2 on page 77.
                   xldv20pmImaLinkCurrentNeTxNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.18 gauge read-only
The number of times a near-end transmit failure alarm condition has been entered on this link (i.e., some form of implementation specific transmit fault) in the current 15 minute interval. ATM Forum IMA v1.1, (R-134) and (O-26) in Section 12.2.2.2 on page 77
                   xldv20pmImaLinkCurrentNeRxNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.5.2.16.1.19 gauge read-only
The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected, or some form of implementation specific receive fault) in the current 15 minute interval. ATM Forum IMA v1.1, (R-135) and (O-26) in Section 12.2.2.2 on page 77
         xldv20pmImaLinkHistoryTable 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17 no-access
This table contains the entries for the 15 min /one day-history data collection results for PMo objects of IMA Link interfaces.
               xldv20pmImaLinkHistoryEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1 no-access
An entry describing the History Data Table for PMo IMA groups.
                   xldv20pmImaLinkHistoryIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.1 xldv20pmintervaltype read-only
This type attribute is used to select between the 15 min or the day accumulation types.
                   xldv20pmImaLinkHistoryHistEntryNr 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.2 integer read-only
This attribute is used as index to address a history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20pmImaLinkCurrentHistEntrySize .
                   xldv20pmImaLinkHistorySuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.3 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                   xldv20pmImaLinkHistoryPeriodEndTime 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.4 integer read-only
Date/time at the end of the selected interval.
                   xldv20pmImaLinkHistoryImaViolations 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.5 gauge read-only
ICP violations: count of errored, invalid or missing ICP cells, except during SES-IMA or UAS-IMA conditions, in one of the previous 96, individual 15 minute, intervals or the previous day. ATM Forum IMA v1.1, (R-125) and (O-26) in Section 12.2.2.2 on page 77.
                   xldv20pmImaLinkHistoryOifAnomalies 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.6 gauge read-only
The number of OIF anomalies, except during SES-IMA or UAS-IMA conditions, at the near-end in one of the previous 96, individual 15 minute, intervals or the previous day. This is an optional attribute. ATM Forum IMA v1.1, (O-20) and (O-26) in Section 12.2.2.2 on page 77
                   xldv20pmImaLinkHistoryNeSevErroredSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.7 gauge read-only
Count of one second intervals containing >= 30% of the ICP cells counted as IV-IMAs, or one or more link defects (e.g., LOS, OOF/LOF, AIS, or LCD), LIF defects, or LODS defects, except during UAS-IMA condition, in one of the previous 96, individual 15 minute, intervals or the previous day. ATM Forum IMA v1.1, (R-126) and (O-26) in Section 12.2.2.2 on page 77
                   xldv20pmImaLinkHistoryFeSevErroredSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.8 gauge read-only
Count of unavailable seconds at near-end in one of the previous 96, individual 15 minute, intervals or the previous day. Unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset of 10 contiguous seconds with no SES-IMA. ATM Forum IMA v1.1, (R-127) and (O-26) in Section 12.2.2.2 on page 77
                   xldv20pmImaLinkHistoryNeUnavailSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.9 gauge read-only
Count of unavailable seconds at near-end in one of the previous 96, individual 15 minute, intervals or the previous day. Unavailability begins at the onset of 10 contiguous SES-IMA and ends at the onset of 10 contiguous seconds with no SES-IMA. ATM Forum IMA v1.1, (R-128) and (O-26) in Section 12.2.2.2 on page 77 .
                   xldv20pmImaLinkHistoryFeUnavailSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.10 gauge read-only
Count of unavailable seconds at far-end in one of the previous 96, individual 15 minute, intervals or the previous day. Unavailability begins at the onset of 10 contiguous SES-IMA-FE and ends at the onset of 10 contiguous seconds with no SES-IMA-FE. ATM Forum IMA v1.1, (R-129) and (O-26) in Section 12.2.2.2 on page 77 .
                   xldv20pmImaLinkHistoryNeTxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.11 gauge read-only
Tx Unusable seconds: count of Unusable seconds at the near-end Tx LSM in one of the previous 96, individual 15 minute, intervals or the previous day. ATM Forum IMA v1.1, (R-130) and (O-26) in Section 12.2.2.2 on page 77.
                   xldv20pmImaLinkHistoryNeRxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.12 gauge read-only
Rx Unusable seconds: count of Unusable seconds at the near-end Rx LSM in one of the previous 96, individual 15 minute, intervals or the previous day. ATM Forum IMA v1.1, (R-131) and (O-26) in Section 12.2.2.2 on page 77.
                   xldv20pmImaLinkHistoryFeTxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.13 gauge read-only
Tx Unusable seconds: count of Unusable seconds at the far-end Tx LSM in one of the previous 96, individual 15 minute, intervals or the previous day. ATM Forum IMA v1.1, (R-132) and (O-26) in Section 12.2.2.2 on page 77.
                   xldv20pmImaLinkHistoryFeRxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.14 gauge read-only
Rx Unusable seconds: count of Unusable seconds at the far-end Rx LSM in one of the previous 96, individual 15 minute, intervals or the previous day. ATM Forum IMA v1.1, (R-133) and (O-26) in Section 12.2.2.2 on page 77.
                   xldv20pmImaLinkHistoryNeTxNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.15 gauge read-only
The number of times a near-end transmit failure alarm condition has been entered on this link (i.e., some form of implementation specific transmit fault) in one of the previous 96, individual 15 minute, intervals or the previous day. ATM Forum IMA v1.1, (R-134) and (O-26) in Section 12.2.2.2 on page 77
                   xldv20pmImaLinkHistoryNeRxNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.5.2.17.1.16 gauge read-only
The number of times a near-end receive failure alarm condition has been entered on this link (i.e., LIF, LODS, RFI-IMA, Mis-Connected, or some form of implementation specific receive fault) in one of the previous 96, individual 15 minute, intervals or the previous day. ATM Forum IMA v1.1, (R-135) and (O-26) in Section 12.2.2.2 on page 77
     xldv20pmProtocolMonitoring 1.3.6.1.4.1.231.7.1.2.1.1.5.3
         xldv20pmTcaPrMCurrentTable 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1 no-access
This table contains the entries for the PrM object at the following tca layer locations: - STM1 interface (in downstream direction) - STS3-c interface (in downstream direction) - E3 interface (in downstream direction) - DS3 interface (in downstream direction) - SU_AD16 interfaces (in upstream stream direction). PrM also possible at IMA groups. It includes attributes for performance parameters, collection interval is 15 min /one day .
             xldv20pmTcaPrMCurrentEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1 no-access
An entry describing the TC-Adaptor Current Data Table .
                 xldv20pmTcIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.1 xldv20pmintervaltype read-only
This nac type attribute is used to select between the 15 min or the day accumulation types.
                 xldv20pmTcAdminState 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.2 xldv20adminstate read-write
This read-write attribute is used to activate (unlock) and deactivate (lock) the functions (incl. collection) performed by this managed entity. Note: the 15min collection object must be activated, before day collection can operate.
                 xldv20pmTcSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.3 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                 xldv20pmTcHistEntrySize 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.4 integer read-only
This read-only attribute indicates the number of 15min history entries configured for the particular interface. The default value is 1 and means that at least one history entry is provided.
                 xldv20pmTcNrHistEntriesAvailable 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.5 integer read-only
This read-only attribute indicates how many HistEntries are already available. The range of values is between 0 and xldv20pmTcHistEntrySize, thereby 0 means that this entry is not valid .
                 xldv20pmTcElapsedTime 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.6 integer read-only
This read-only attribute represents the difference between the current time and the start of the present summary interval. Units are seconds when 15 minute interval is selected or minutes for day interval. (Note: accurate to the sample time interval).
                 xldv20pmTcThresholdLimitIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.7 integer read-write
This read-write attribute provides an index to the ThresholdLimitTable managed entity that contains the threshold limits for the performance parameters reported by this managed entity. When the value of this attribute is set to 1, default threshold limits shall be used. These default values are not part of the threshold limit table but are hard coded in the application SW of PM.
                 xldv20pmTcDiscardedCells 1.3.6.1.4.1.231.7.1.2.1.1.5.3.1.1.8 counter read-only
This read-only attribute represents a counter of the number of ATM cells discarded at this interface, due to a HEC violation, since the start of this interval .
         xldv20pmTcaPrMHistoryTable 1.3.6.1.4.1.231.7.1.2.1.1.5.3.2 no-access
This table contains the entries for the PrM history object at the different tca layer locations. It contains results that are overtaken from the TcaPrMCurrentTable PM-object at the end of a 15 min /day interval .
             xldv20pmTcaPrMHistoryEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.3.2.1 no-access
An entry describing the TC-Adaptor History Data Table .
                 xldv20pmThIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.3.2.1.1 xldv20pmintervaltype read-only
This type attribute is used to select between the 15 min or the day accumulation types.
                 xldv20pmThHistEntryNr 1.3.6.1.4.1.231.7.1.2.1.1.5.3.2.1.2 integer read-only
This attribute is used as index to address a history entry. Entry 1 is the most recent, entry 96 is 24 hours ago. The range of values is between 1 and xldv20pmTcHistEntrySize.
                 xldv20pmThSuspectFlag 1.3.6.1.4.1.231.7.1.2.1.1.5.3.2.1.3 xldv20pmsuspecttype read-only
This read-only attribute will be set to indicate that troubles arose during an interval and that the counter values are suspect and incomplete.
                 xldv20pmThPeriodEndTime 1.3.6.1.4.1.231.7.1.2.1.1.5.3.2.1.4 integer read-only
This read-only attribute is a record of date/time at the end of an interval .
                 xldv20pmThDiscardedCells 1.3.6.1.4.1.231.7.1.2.1.1.5.3.2.1.5 counter read-only
This read-only attribute represents a set of history counter of the number of ATM cells discarded at this interface, due to a HEC violation, since the start of this interval .
     xldv20pmThresholding 1.3.6.1.4.1.231.7.1.2.1.1.5.4
         xldv20pmThresholdLimitTable 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1 no-access
The threshold limit table for all interface. This table associates threshold limit index/PM counter pairs with threshold limit values for a 15 minutes interval. Entries with same threshold limit index belong to the same threshold limit profile. Each of the following TC-adaptor types are available and can be configured: adc, s1n, s3n, d3n, e3n. A crossing of a threshold limit leads to a threshold crossing alert.
             xldv20pmThresholdLimitEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1 no-access
An entry describing the threshold limit information .
                 xldv20pmThlThresholdLimitIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.1 integer read-only
This read-only attribute selects a profile out of the threshold limit table .
                 xldv20pmThlNeBackgroundBlockErrors 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.2 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeCodeViolations 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.3 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeCodeViolationsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.4 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeCodeViolationsP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.5 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeCodeViolationsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.6 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.7 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeErroredSecondsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.8 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeErroredSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.9 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeSas 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.10 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeSeverelyErroredFrameSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.11 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeSeverelyErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.12 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeSeverelyErroredSecondsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.13 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeSeverelyErroredSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.14 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.15 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeUnavailableSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.16 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeAisSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.17 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeOfsSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.18 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlNeLosSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.19 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlFeBackgroundBlockErrors 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.20 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlFeCodeViolations 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.21 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlFeCodeViolationsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.22 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlFeCodeViolationsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.23 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlFeErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.24 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlFeErroredSecondsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.25 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlFeErroredSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.26 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlFeSas 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.27 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlFeSeverelyErroredSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.28 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlFeSeverelyErroredSecondsCP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.29 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlFeSeverelyErroredSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.30 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlFeUnavailableSeconds 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.31 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlFeUnavailableSecondsPLCP 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.32 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlDiscardedCells 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.33 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlImaGroupUnavailSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.34 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlImaGroupNeNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.35 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlImaLinkImaViolations 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.36 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlImaLinkOifAnomalies 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.37 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlImaLinkNeSevErroredSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.38 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlImaLinkFeSevErroredSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.39 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlImaLinkNeUnavailSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.40 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlImaLinkFeUnavailSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.41 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlImaLinkNeTxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.42 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlImaLinkNeRxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.43 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlImaLinkFeTxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.44 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlImaLinkFeRxUnusableSecs 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.45 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlImaLinkNeTxNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.46 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmThlImaLinkNeRxNumFailures 1.3.6.1.4.1.231.7.1.2.1.1.5.4.1.1.47 integer read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
         xldv20pmAtmThresholdLimitTable 1.3.6.1.4.1.231.7.1.2.1.1.5.4.2 no-access
The threshold limit table for all interface. This table associates threshold limit index/PM counter pairs with threshold limit values for a 15 minutes interval. Entries with same threshold limit index belong to the same threshold limit profile. A crossing of a threshold limit leads to a threshold crossing alert.
             xldv20pmAtmThresholdLimitEntry 1.3.6.1.4.1.231.7.1.2.1.1.5.4.2.1 no-access
An entry describing the threshold limit information .
                 xldv20pmAtlThresholdLimitIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.4.2.1.1 integer read-only
This read-only attribute selects a profile out of the threshold limit table of PM on ATM layer.
                 xldv20pmAtlTransmittedUserCells 1.3.6.1.4.1.231.7.1.2.1.1.5.4.2.1.2 unsigned32 read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmAtlLostUserCells 1.3.6.1.4.1.231.7.1.2.1.1.5.4.2.1.3 unsigned32 read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
                 xldv20pmAtlMisinsertedUserCells 1.3.6.1.4.1.231.7.1.2.1.1.5.4.2.1.4 unsigned32 read-write
This read-write attribute selects the threshold limit value of the counter in the current threshold limit profile.
     xldv20pmTraps 1.3.6.1.4.1.231.7.1.2.1.1.5.5
         xldv20pmTrapVars 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1
             xldv20pmTvIfIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.1 unsigned16 no-access
The interface index of the reporting PM object.
             xldv20pmTvPmType 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.2 xldv20pmtype no-access
Specifies the reporting PM object and OAM level.
             xldv20pmTvPmCounter 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.3 xldv20pmcountername no-access
Identifies the PM counter.
             xldv20pmTvCurrentCounterValue 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.4 counter no-access
The actual counter value at detection.
             xldv20pmTvCurrentCounterLimit 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.5 counter no-access
The current value of threshold limit.
             xldv20pmTvAtmPmCounter 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.6 xldv20pmatmcountertype no-access
Identifies the performance parameter.
             xldv20pmTvAtmObjectIndex 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.7 unsigned16 no-access
Identifies the AtmPm object.
             xldv20pmTvEndpointType 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.8 xldv20pmendpointtype no-access
Identifies the type of endpoint.
             xldv20pmTvIntervalType 1.3.6.1.4.1.231.7.1.2.1.1.5.5.1.9 xldv20pmintervaltype no-access
Identifies the type of interval.
         xldv20pmTrapTypes 1.3.6.1.4.1.231.7.1.2.1.1.5.5.2