Wellfleet-RF-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-RF-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfIpRfRipImportTable 1.3.6.1.4.1.18.3.5.3.2.1.8 no-access
The list of Rip Import Route Filter Rules in IP
     wfIpRfRipImportEntry 1.3.6.1.4.1.18.3.5.3.2.1.8.1 no-access
An entry in the Rip Import Rule Table
         wfIpRfRipImportCreate 1.3.6.1.4.1.18.3.5.3.2.1.8.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule. Enumeration: 'create': 1, 'delete': 2.
         wfIpRfRipImportEnable 1.3.6.1.4.1.18.3.5.3.2.1.8.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule. Enumeration: 'enable': 1, 'disable': 2.
         wfIpRfRipImportAddress 1.3.6.1.4.1.18.3.5.3.2.1.8.1.3 ipaddress read-only
The IP address to which this filter applies
         wfIpRfRipImportMask 1.3.6.1.4.1.18.3.5.3.2.1.8.1.4 ipaddress read-only
The Mask to which this filter applies. When combined with the Address, a range is specified for application of this rule
         wfIpRfRipImportAction 1.3.6.1.4.1.18.3.5.3.2.1.8.1.5 integer read-write
The Action of this Filter Enumeration: 'ignore': 3, 'accept': 1.
         wfIpRfRipImportPreference 1.3.6.1.4.1.18.3.5.3.2.1.8.1.6 integer read-write
The Preference associated with this filter - only valid if accept
         wfIpRfRipImportRipGateway 1.3.6.1.4.1.18.3.5.3.2.1.8.1.7 ipaddress read-only
The RIP Gateway to be concerned with
         wfIpRfRipImportRipInterface 1.3.6.1.4.1.18.3.5.3.2.1.8.1.8 ipaddress read-only
The IP Network Interface to be concerned with
         wfIpRfRipImportApplyMask 1.3.6.1.4.1.18.3.5.3.2.1.8.1.9 ipaddress read-write
The Mask to apply to this route learned instead of the default. NULL means to apply the normal filter
 wfIpRfRipExportTable 1.3.6.1.4.1.18.3.5.3.2.1.9 no-access
The list of Rip Export Route Filter Rules in IP
     wfIpRfRipExportEntry 1.3.6.1.4.1.18.3.5.3.2.1.9.1 no-access
An entry in the Rip Export Rule Table
         wfIpRfRipExportCreate 1.3.6.1.4.1.18.3.5.3.2.1.9.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule. Enumeration: 'create': 1, 'delete': 2.
         wfIpRfRipExportEnable 1.3.6.1.4.1.18.3.5.3.2.1.9.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule. Enumeration: 'enable': 1, 'disable': 2.
         wfIpRfRipExportAddress 1.3.6.1.4.1.18.3.5.3.2.1.9.1.3 ipaddress read-only
The IP address to which this filter applies
         wfIpRfRipExportMask 1.3.6.1.4.1.18.3.5.3.2.1.9.1.4 ipaddress read-only
The Mask for the Address Above. When combined with the Address, a range is specified for application of this filter rule
         wfIpRfRipExportFromProtocol 1.3.6.1.4.1.18.3.5.3.2.1.9.1.5 integer read-only
The protocol from which this Information is derived Enumeration: 'egp': 2, 'direct': 4, 'rip': 1, 'static': 5, 'bgp3': 6, 'ospf': 3.
         wfIpRfRipExportAction 1.3.6.1.4.1.18.3.5.3.2.1.9.1.6 integer read-write
The action of this export filter; if IP_RF_RIP_EXP_ACTION_AGGREGATE action, the default route, 0.0.0.0, is advertised instead networks that match this filter Enumeration: 'ignore': 3, 'aggregate': 4, 'propa': 2.
         wfIpRfRipExportInterface 1.3.6.1.4.1.18.3.5.3.2.1.9.1.7 ipaddress read-only
The optional outbound interface on which to apply this filter
         wfIpRfRipExportRipMetric 1.3.6.1.4.1.18.3.5.3.2.1.9.1.8 integer read-write
The optional export RIP metric to apply to this filter. Zero means: use the route's actual cost. Only valid for propagate
 wfIpRfOspfImportTable 1.3.6.1.4.1.18.3.5.3.2.1.10 no-access
The list of OSPF Import Route Filter Rules in IP
       wfIpRfOspfImportEntry 1.3.6.1.4.1.18.3.5.3.2.1.10.1 no-access
An entry in the OSPF Import Route Filter Table
           wfIpRfOspfImportCreate 1.3.6.1.4.1.18.3.5.3.2.1.10.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule. Enumeration: 'create': 1, 'delete': 2.
           wfIpRfOspfImportEnable 1.3.6.1.4.1.18.3.5.3.2.1.10.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule. Enumeration: 'enable': 1, 'disable': 2.
           wfIpRfOspfImportAddress 1.3.6.1.4.1.18.3.5.3.2.1.10.1.3 ipaddress read-only
The IP Address to which this filter applies
           wfIpRfOspfImportMask 1.3.6.1.4.1.18.3.5.3.2.1.10.1.4 ipaddress read-only
The Mask to which this filter applies. When combined with the Address, a range is specified for application of this rule
           wfIpRfOspfImportAction 1.3.6.1.4.1.18.3.5.3.2.1.10.1.5 integer read-write
The Action of this Filter Enumeration: 'ignore': 3, 'accept': 1.
           wfIpRfOspfImportPreference 1.3.6.1.4.1.18.3.5.3.2.1.10.1.6 integer read-write
The Preference associated with this filter - only valid if accept
           wfIpRfOspfImportType 1.3.6.1.4.1.18.3.5.3.2.1.10.1.7 integer read-only
The OSPF route Type to be concerned with. The valid values are null (any route type), 1 (OSPF external type 1), and 2 (OSPF external type 2).
           wfIpRfOspfImportTag 1.3.6.1.4.1.18.3.5.3.2.1.10.1.8 gauge read-only
The OSPF Tag to be concerned with
 wfIpRfOspfExportTable 1.3.6.1.4.1.18.3.5.3.2.1.11 no-access
The list of OSPF Export Route Filter Rules in IP
       wfIpRfOspfExportEntry 1.3.6.1.4.1.18.3.5.3.2.1.11.1 no-access
An entry in the OSPF Export Route Filter Table
           wfIpRfOspfExportCreate 1.3.6.1.4.1.18.3.5.3.2.1.11.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule. Enumeration: 'create': 1, 'delete': 2.
           wfIpRfOspfExportEnable 1.3.6.1.4.1.18.3.5.3.2.1.11.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule. Enumeration: 'enable': 1, 'disable': 2.
           wfIpRfOspfExportAddress 1.3.6.1.4.1.18.3.5.3.2.1.11.1.3 ipaddress read-only
The IP address to which this filter applies
           wfIpRfOspfExportMask 1.3.6.1.4.1.18.3.5.3.2.1.11.1.4 ipaddress read-only
The Mask for the Address Above. When combined with the Address, a range is specified for application of this filter rule
           wfIpRfOspfExportFromProtocol 1.3.6.1.4.1.18.3.5.3.2.1.11.1.5 integer read-only
The protocol from which this Information is derived Enumeration: 'egp': 2, 'direct': 4, 'rip': 1, 'static': 5, 'bgp3': 6, 'ospf': 3.
           wfIpRfOspfExportAction 1.3.6.1.4.1.18.3.5.3.2.1.11.1.6 integer read-write
The action of this export filter Enumeration: 'ignore': 3, 'propa': 2.
           wfIpRfOspfExportType 1.3.6.1.4.1.18.3.5.3.2.1.11.1.7 integer read-write
The ospf type to use when this filter matches
           wfIpRfOspfExportTag 1.3.6.1.4.1.18.3.5.3.2.1.11.1.8 gauge read-write
The ospf tag to use when this filter matches
           wfIpRfOspfExportAutoTag 1.3.6.1.4.1.18.3.5.3.2.1.11.1.9 integer read-write
BGP/OSPF automatic tag generation: if enabled, a tag will be generated according to the criteria in RFC 1364. Only valid if wfIpRfOspfExportType is set. If enabled, wfIpRfOspfExportTag is ignored. Enumeration: 'enable': 1, 'disable': 2.
 wfIpRfEgpImportTable 1.3.6.1.4.1.18.3.5.3.2.1.12 no-access
The list of Egp Import Route Filter Rules in IP
       wfIpRfEgpImportEntry 1.3.6.1.4.1.18.3.5.3.2.1.12.1 no-access
An entry in the Egp Import Rule Table
           wfIpRfEgpImportCreate 1.3.6.1.4.1.18.3.5.3.2.1.12.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule. Enumeration: 'create': 1, 'delete': 2.
           wfIpRfEgpImportEnable 1.3.6.1.4.1.18.3.5.3.2.1.12.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule. Enumeration: 'enable': 1, 'disable': 2.
           wfIpRfEgpImportAddress 1.3.6.1.4.1.18.3.5.3.2.1.12.1.3 ipaddress read-only
The advertised network to which this filter applies
           wfIpRfEgpImportMask 1.3.6.1.4.1.18.3.5.3.2.1.12.1.4 ipaddress read-only
The Mask of the Address to which this filter applies.
           wfIpRfEgpImportAction 1.3.6.1.4.1.18.3.5.3.2.1.12.1.5 integer read-write
The Action of this Filter Enumeration: 'ignore': 3, 'accept': 1.
           wfIpRfEgpImportPreference 1.3.6.1.4.1.18.3.5.3.2.1.12.1.6 integer read-write
The Preference associated with this filter - only valid if accept
           wfIpRfEgpImportPeer 1.3.6.1.4.1.18.3.5.3.2.1.12.1.7 ipaddress read-only
The Egp Peer to be to be concerned with
           wfIpRfEgpImportAs 1.3.6.1.4.1.18.3.5.3.2.1.12.1.8 integer read-only
The Autonomous System number to be concerned with
           wfIpRfEgpImportGateway 1.3.6.1.4.1.18.3.5.3.2.1.12.1.9 ipaddress read-only
The EGP gateway to be concerned with
 wfIpRfEgpExportTable 1.3.6.1.4.1.18.3.5.3.2.1.13 no-access
The list of Egp Export Route Filter Rules in IP
       wfIpRfEgpExportEntry 1.3.6.1.4.1.18.3.5.3.2.1.13.1 no-access
An entry in the Egp Export Rule Table
           wfIpRfEgpExportCreate 1.3.6.1.4.1.18.3.5.3.2.1.13.1.1 integer read-write
Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete this Rule. Enumeration: 'create': 1, 'delete': 2.
           wfIpRfEgpExportEnable 1.3.6.1.4.1.18.3.5.3.2.1.13.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable this Rule. Enumeration: 'enable': 1, 'disable': 2.
           wfIpRfEgpExportAddress 1.3.6.1.4.1.18.3.5.3.2.1.13.1.3 ipaddress read-only
The advertised network to which this filter applies
           wfIpRfEgpExportMask 1.3.6.1.4.1.18.3.5.3.2.1.13.1.4 ipaddress read-only
The Mask of the Address to which this filter applies.
           wfIpRfEgpExportFromProtocol 1.3.6.1.4.1.18.3.5.3.2.1.13.1.5 integer read-only
The protocol from which this Information is derived Enumeration: 'egp': 2, 'direct': 4, 'rip': 1, 'static': 5, 'bgp3': 6, 'ospf': 3.
           wfIpRfEgpExportAction 1.3.6.1.4.1.18.3.5.3.2.1.13.1.6 integer read-write
The action of this export filter Enumeration: 'ignore': 3, 'propa': 2.
           wfIpRfEgpExportPeer 1.3.6.1.4.1.18.3.5.3.2.1.13.1.7 ipaddress read-only
The Egp Peer to be to be concerned with
           wfIpRfEgpExportOspfType 1.3.6.1.4.1.18.3.5.3.2.1.13.1.8 integer read-only
The type of route being filtered. This field is only valid if the wfIpRfEgpExportFromProtocol is OSPF. Otherwise, the field is 0. Enumeration: 'ospfinttype': 3, 'ospfexttype2': 2, 'ospfexttype1': 1.
           wfIpRfEgpExportOspfTag 1.3.6.1.4.1.18.3.5.3.2.1.13.1.9 integer read-only
The tag of the route being filtered. This field is only valid if the wfIpRfEgpExportFromProtocol is OSPF. Otherwise, this field is 0.
           wfIpRfEgpExportInterface 1.3.6.1.4.1.18.3.5.3.2.1.13.1.10 ipaddress read-write
The optional outbound interface on which to apply this filter
           wfIpRfEgpExportMetric 1.3.6.1.4.1.18.3.5.3.2.1.13.1.11 integer read-write
The optional export Egp metric to apply to this filter. Zero means: use the route's actual cost. Only valid for propagate
 wfIpRfBgp3ImportTable 1.3.6.1.4.1.18.3.5.3.2.1.14 no-access
The table of BGP-3 Import Route Filter Rules
       wfIpRfBgp3ImportEntry 1.3.6.1.4.1.18.3.5.3.2.1.14.1 no-access
An entry in the BGP-3 Import Rule Table
           wfIpRfBgp3ImportCreate 1.3.6.1.4.1.18.3.5.3.2.1.14.1.1 integer read-write
Create/Delete parameter. if set to delete, the rule is removed. Enumeration: 'create': 1, 'delete': 2.
           wfIpRfBgp3ImportEnable 1.3.6.1.4.1.18.3.5.3.2.1.14.1.2 integer read-write
Enable/Disable parameter. controls whether the rule is enabled or disabled. Enumeration: 'enable': 1, 'disable': 2.
           wfIpRfBgp3ImportAddress 1.3.6.1.4.1.18.3.5.3.2.1.14.1.3 ipaddress read-only
The advertised network to which this filter applies. Zero implies `all networks' or the default route, based on wfIpRfBgp3ImportMask.
           wfIpRfBgp3ImportMask 1.3.6.1.4.1.18.3.5.3.2.1.14.1.4 ipaddress read-only
The mask applied to wfIpRfBgp3ImportAddress. If zero, this filter applies to all networks. If the address is zero and this parameter is 255.255.255.255, this filter applies to the default route.
           wfIpRfBgp3ImportAction 1.3.6.1.4.1.18.3.5.3.2.1.14.1.5 integer read-write
The Action of this Filter Enumeration: 'ignore': 3, 'accept': 1.
           wfIpRfBgp3ImportPreference 1.3.6.1.4.1.18.3.5.3.2.1.14.1.6 integer read-write
The Preference associated with this filter - only valid if accept
           wfIpRfBgp3ImportPeerAs 1.3.6.1.4.1.18.3.5.3.2.1.14.1.7 integer read-only
The BGP-3 Peer's AS number (or zero if `any AS')
           wfIpRfBgp3ImportPeerAddress 1.3.6.1.4.1.18.3.5.3.2.1.14.1.8 ipaddress read-only
The IP address (not the peer ID) of the peer that this advertisement was received from (zero if `any peer')
           wfIpRfBgp3ImportOrigAs 1.3.6.1.4.1.18.3.5.3.2.1.14.1.9 integer read-only
The AS number of the BGP-3 gateway that originated the route (or zero for `any AS')
           wfIpRfBgp3ImportRouteOrigin 1.3.6.1.4.1.18.3.5.3.2.1.14.1.10 integer read-only
A value for the ORIGIN path attribute (or zero if not applicable) Enumeration: 'egp': 2, 'incomplete': 3, 'igp': 1.
           wfIpRfBgp3ImportBgp3Preference 1.3.6.1.4.1.18.3.5.3.2.1.14.1.11 gauge read-write
The Preference associated with this filter for comparison to other BGP routes only - only valid if accept
 wfIpRfBgp3ExportTable 1.3.6.1.4.1.18.3.5.3.2.1.15 no-access
The table of BGP-3 Export Route Filter Rules
       wfIpRfBgp3ExportEntry 1.3.6.1.4.1.18.3.5.3.2.1.15.1 no-access
An entry in the BGP-3 Export Rule Table
           wfIpRfBgp3ExportCreate 1.3.6.1.4.1.18.3.5.3.2.1.15.1.1 integer read-write
Create/Delete: if set to delete, the rule is removed Enumeration: 'create': 1, 'delete': 2.
           wfIpRfBgp3ExportEnable 1.3.6.1.4.1.18.3.5.3.2.1.15.1.2 integer read-write
Enable/Disable: controls whether the rule is enabled or disabled Enumeration: 'enable': 1, 'disable': 2.
           wfIpRfBgp3ExportAddress 1.3.6.1.4.1.18.3.5.3.2.1.15.1.3 ipaddress read-only
The advertised network to which this filter applies. Zero implies `all networks' or the default route, based on wfIpRfBgp3ExportMask.
           wfIpRfBgp3ExportMask 1.3.6.1.4.1.18.3.5.3.2.1.15.1.4 ipaddress read-only
The mask applied to wfIpRfBgp3ExportAddress. If zero, this filter applies to all networks. If the address is zero and this parameter is 255.255.255.255, this filter applies to the default route.
           wfIpRfBgp3ExportFromProtocol 1.3.6.1.4.1.18.3.5.3.2.1.15.1.5 integer read-only
The protocol from which this Information is derived Enumeration: 'egp': 2, 'direct': 4, 'rip': 1, 'static': 5, 'bgp3': 6, 'ospf': 3.
           wfIpRfBgp3ExportAction 1.3.6.1.4.1.18.3.5.3.2.1.15.1.6 integer read-write
The action of this export filter; if IP_RF_BGP3_EXP_ACTION_AGGREGATE action, the default route, 0.0.0.0, is advertised instead networks that match this filter Enumeration: 'ignore': 3, 'aggregate': 4, 'propa': 2.
           wfIpRfBgp3ExportPeerAs 1.3.6.1.4.1.18.3.5.3.2.1.15.1.7 integer read-only
The AS number to which the network advertisement is going (zero if `any AS')
           wfIpRfBgp3ExportPeerAddress 1.3.6.1.4.1.18.3.5.3.2.1.15.1.8 ipaddress read-only
The IP address (not the peer ID) of the peer that this advertisement is going to (zero if `any peer')
           wfIpRfBgp3ExportOspfType 1.3.6.1.4.1.18.3.5.3.2.1.15.1.9 integer read-only
The type of route being filtered. This field is only valid if the wfIpRfEgpExportFromProtocol is OSPF. Otherwise, the field is 0. Enumeration: 'ospfinttype': 3, 'ospfexttype2': 2, 'ospfexttype1': 1.
           wfIpRfBgp3ExportOspfTag 1.3.6.1.4.1.18.3.5.3.2.1.15.1.10 integer read-only
The OSPF tag of the route being filtered. This field is only valid if the wfIpRfBgp3ExportFromProtocol is OSPF and wfIpRfBgp3ExportOspfType is external type 1 or 2. Otherwise, this field is 0.
           wfIpRfBgp3ExportUseMetric 1.3.6.1.4.1.18.3.5.3.2.1.15.1.11 integer read-write
Determines whether or not an INTER_AS_METRIC will be advertised for the associated network(s). none (1) indicates that no metric will be advertised. specified (2) indicates that the value in wfIpRfBgp3ExportInterAsMetric will be used. originating (3) indicates that the metric from the originating protocol will be used. Only valid for propagate. Enumeration: 'originating': 3, 'none': 1, 'specified': 2.
           wfIpRfBgp3ExportInterAsMetric 1.3.6.1.4.1.18.3.5.3.2.1.15.1.12 integer read-write
If wfIpRfBgp3ExportUseMetric is set to specified (2), this is the value that will be used for the INTER_AS_METRIC. Only valid for propagate.
           wfIpRfBgp3ExportOrigin 1.3.6.1.4.1.18.3.5.3.2.1.15.1.13 integer read-write
The value to use for the ORIGIN path attribute when advertising this route (zero means `do according to default'). Only valid for propagate action. Only valid if route origin is RIP or STATIC (ignored otherwise).
           wfIpRfBgp3ExportNeighAs 1.3.6.1.4.1.18.3.5.3.2.1.15.1.14 integer read-write
If action is propagate, route origin is RIP or STATIC, and ExportOrigin is EGP, this AS number is used as the EGP neighbor AS number when constructing the AS-PATH (ignored otherwise).