Wellfleet-LAPB-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-LAPB-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfLapbTable 1.3.6.1.4.1.18.3.5.1.8 no-access
********************************************************************** LAPB MIB record *********************************************************************
     wfLapbEntry 1.3.6.1.4.1.18.3.5.1.8.1 no-access
An entry in the LAPB table
         wfLapbDelete 1.3.6.1.4.1.18.3.5.1.8.1.1 integer read-write
Create/Delete parameter Enumeration: 'deleted': 2, 'created': 1.
         wfLapbDisable 1.3.6.1.4.1.18.3.5.1.8.1.2 integer read-write
Enable/Disable parameter Enumeration: 'disabled': 2, 'enabled': 1.
         wfLapbState 1.3.6.1.4.1.18.3.5.1.8.1.3 integer read-only
Line Driver state variable, Not Present, DSR Wait, Init, Down, Up Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpresent': 4.
         wfLapbLineNumber 1.3.6.1.4.1.18.3.5.1.8.1.4 integer read-only
Instance identifier, Line Number, filled in by LAPB
         wfLapbLLIndex 1.3.6.1.4.1.18.3.5.1.8.1.5 integer read-only
Instance identifier, Lower Layer Index, filled in by LAPB
         wfLapbCct 1.3.6.1.4.1.18.3.5.1.8.1.6 integer read-only
CCT number for this LAPB subsystem, it is associated with the driver or application running underneath it.
         wfLapbStationType 1.3.6.1.4.1.18.3.5.1.8.1.7 integer read-write
Identifies the desired station type of this interface. A value of DxE indicates XID enabled but not negotiation has not yet taken place. Enumeration: 'dxe': 3, 'dce': 2, 'dte': 1.
         wfLapbControlField 1.3.6.1.4.1.18.3.5.1.8.1.8 integer read-write
This parameter establishes the desired size of the sequence numbers used to number frames. Enumeration: 'modulo8': 1, 'modulo128': 2.
         wfLapbN1FrameSize 1.3.6.1.4.1.18.3.5.1.8.1.9 integer read-write
The default maximum N1 frame size desired in number of bytes for a frame transmitted by the DxE. This excludes flags and 0 bits inserted for transparency.
         wfLapbKWindowSize 1.3.6.1.4.1.18.3.5.1.8.1.10 integer read-write
The default transmit and receive window size for this Interface. This is the maximum number of unacknowledged sequence frames that may be outstanding from this DxE at any one time.
         wfLapbN2RxmitCount 1.3.6.1.4.1.18.3.5.1.8.1.11 integer read-write
The default N2 retry count indicates the number of retransmission attempts which will be tried per frame before a line is determined to be down. The retry count is max attempts following expiration of the T1 timer.
         wfLapbT1AckTimer 1.3.6.1.4.1.18.3.5.1.8.1.12 integer read-write
The default T1 timer for this interface. This specifies the maximum time in tenths of seconds to wait for an acknowledgment of a frame.
         wfLapbT2AckDelayTimer 1.3.6.1.4.1.18.3.5.1.8.1.13 integer read-write
The default T2 timer for this interface. This specifies the maximum time in seconds to wait before sending an acknowledgment for a sequenced frame. A value of one means there will be no delay in acknowledgment generation.
         wfLapbT3DisconnectTimer 1.3.6.1.4.1.18.3.5.1.8.1.14 integer read-write
The T3 timer for this interface. This specifies the time in seconds to wait before considering the link disconnected. A value of one indicates the link will be considered disconnected upon completion of the frame exchange to disconnect the link.
         wfLapbT4IdleTimer 1.3.6.1.4.1.18.3.5.1.8.1.15 integer read-write
The T4 timer for this interface. This specifies the maximum time in seconds to allow without frames being exchanged on the data link. Not implemented for this project.
         wfLapbActionInitiate 1.3.6.1.4.1.18.3.5.1.8.1.16 integer read-write
This identifies the action LAPB will take to initiate link set-up. Enumeration: 'active': 1, 'passive': 2, 'activeDisc': 3.
         wfLapbXidDisable 1.3.6.1.4.1.18.3.5.1.8.1.17 integer read-write
XID enable/disable parameter. This parameter is used to enable or disable transmission/reception of Test XID frames. Enumeration: 'disabled': 2, 'enabled': 1.
         wfLapbCommandAddress 1.3.6.1.4.1.18.3.5.1.8.1.18 integer read-write
The local command address parameter contains the DTE or DCE value expressed as a single octet. Enumeration: 'dce': 3, 'dte': 1.
         wfLapbResponseAddress 1.3.6.1.4.1.18.3.5.1.8.1.19 integer read-write
The local response address parameter contains the DTE or DCE value expressed as a single octet. Enumeration: 'dce': 1, 'dte': 3.
         wfLapbWanProtocol 1.3.6.1.4.1.18.3.5.1.8.1.20 integer read-write
WAN protocol selection is provided via this parameter. The supported protocols can be selected per interface. Enumeration: 'x25': 6, 'lapb': 7, 'standard': 1.
         wfLapbRxOctets 1.3.6.1.4.1.18.3.5.1.8.1.21 counter read-only
Number of octets received without error
         wfLapbRxFrames 1.3.6.1.4.1.18.3.5.1.8.1.22 counter read-only
Number of frames received without error
         wfLapbTxOctets 1.3.6.1.4.1.18.3.5.1.8.1.23 counter read-only
Number of octets transmitted without error
         wfLapbTxFrames 1.3.6.1.4.1.18.3.5.1.8.1.24 counter read-only
Number of frames transmitted without error
         wfLapbReXmits 1.3.6.1.4.1.18.3.5.1.8.1.25 counter read-only
Number of retransmission occurances
         wfLapbRejectsTx 1.3.6.1.4.1.18.3.5.1.8.1.26 counter read-only
Number of reject frames which were transmitted
         wfLapbRejectsRx 1.3.6.1.4.1.18.3.5.1.8.1.27 counter read-only
Number of reject frames which were received
         wfLapbFrameRejectsTx 1.3.6.1.4.1.18.3.5.1.8.1.28 counter read-only
Number of Frame Rejects transmitted
         wfLapbFrameRejectsRx 1.3.6.1.4.1.18.3.5.1.8.1.29 counter read-only
Number of Frame Rejects received
         wfLapbRRsTx 1.3.6.1.4.1.18.3.5.1.8.1.30 counter read-only
Number of Receiver Ready frames transmitted
         wfLapbRRsRx 1.3.6.1.4.1.18.3.5.1.8.1.31 counter read-only
Number of Receiver Ready frames received
         wfLapbRNRsTx 1.3.6.1.4.1.18.3.5.1.8.1.32 counter read-only
Number of Receiver Not Ready frames transmitted
         wfLapbRNRsRx 1.3.6.1.4.1.18.3.5.1.8.1.33 counter read-only
Number of Receiver Not Ready frames received
         wfLapbResets 1.3.6.1.4.1.18.3.5.1.8.1.34 counter read-only
Number of Link Connection Resets
         wfLapbNormalDisc 1.3.6.1.4.1.18.3.5.1.8.1.35 counter read-only
Number of normal link disconnections
         wfLapbAbnormalDisc 1.3.6.1.4.1.18.3.5.1.8.1.36 counter read-only
Number of abnormal link disconnections
         wfLapbSetupAllowed 1.3.6.1.4.1.18.3.5.1.8.1.37 counter read-only
Number of successful link connections
         wfLapbSetupRefused 1.3.6.1.4.1.18.3.5.1.8.1.38 counter read-only
Number of unsuccessful link connections
         wfLapbNetworkType 1.3.6.1.4.1.18.3.5.1.8.1.39 integer read-write
The types GOSIP and NET2 are used in conjunction with the X.25 network Enumeration: 'net2': 2, 'gosip': 1.
         wfLapbIdleRRFrames 1.3.6.1.4.1.18.3.5.1.8.1.40 integer read-write
XID enable/disable parameter. This parameter is used to enable or disable transmission/reception of Test XID frames. Enumeration: 'on': 1, 'off': 2.
         wfLapbClientType 1.3.6.1.4.1.18.3.5.1.8.1.41 integer read-write
This parameter is used to describe the client above the LAPB protocol layer. By default, the client is the X.25 Packet layer. Currently, the only other selection is ipex or none. Enumeration: 'x25': 2, 'ipex': 3, 'none': 1.
         wfLapbRetransmitTimer 1.3.6.1.4.1.18.3.5.1.8.1.42 integer read-write
The Retransmit timer for this interface. This specifies the maximum time in seconds to allow without retransmitting frames after RNR and RR received on this interface.