Wellfleet-DSQMS-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-DSQMS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfDsqmsIfTable 1.3.6.1.4.1.18.3.5.1.16.1 no-access
Table of DSQMS (DiffServ Queue Management and Scheduler) interfaces.
     wfDsqmsIfEntry 1.3.6.1.4.1.18.3.5.1.16.1.1 no-access
DSQMS interface table entry.
         wfDsqmsIfCreate 1.3.6.1.4.1.18.3.5.1.16.1.1.1 integer read-write
Create/Delete parameter. Default is created. Enumeration: 'deleted': 2, 'created': 1.
         wfDsqmsIfEnable 1.3.6.1.4.1.18.3.5.1.16.1.1.2 integer read-write
Enable/Disable parameter. Default is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
         wfDsqmsIfState 1.3.6.1.4.1.18.3.5.1.16.1.1.3 integer read-only
Current state of DSQMS on this interface. Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpres': 5, 'holddown': 4.
         wfDsqmsIfLineNumber 1.3.6.1.4.1.18.3.5.1.16.1.1.4 integer read-only
Identifies the instance for this interface.
         wfDsqmsIfRestart 1.3.6.1.4.1.18.3.5.1.16.1.1.5 integer read-write
Setting this attribute to a 'set(1)' will cause immediate updating of wfDsqmsIfQueueEntry MIB on the same line number. Once activated, this attribute should be reset to 'notset(2)' to allow subsequent activations. Enumeration: 'set': 1, 'notset': 2.
         wfDsqmsIfTotalNumQueues 1.3.6.1.4.1.18.3.5.1.16.1.1.6 integer read-only
The total number of queues configured for this interface.
         wfDsqmsIfNumPQueues 1.3.6.1.4.1.18.3.5.1.16.1.1.7 integer read-only
Number of priority queues configued for this interface.
         wfDsqmsIfNumWQueues 1.3.6.1.4.1.18.3.5.1.16.1.1.8 integer read-only
Number of weighted queues configued for this interface.
         wfDsqmsIfNumPQInUse 1.3.6.1.4.1.18.3.5.1.16.1.1.9 integer read-only
Number of priority queues that are currently in use for this interface.
         wfDsqmsIfNumWQInUse 1.3.6.1.4.1.18.3.5.1.16.1.1.10 integer read-only
Number of weighted queues that are currently in use for this interface.
         wfDsqmsIfDebugLevel 1.3.6.1.4.1.18.3.5.1.16.1.1.11 integer read-write
Indicates the level of debug. none - default. No debug information is displayed trace - displaying related DSQMS function names detailed - in additional to log messages of 'high' level, some environment variables, queue info will be logged. Note: DO NOT set to 'trace' or 'detailed' debug level in operational environment as it will likely flood the logging facility. This attribute is reserved for specialized debugging in a controlled lab environment. Enumeration: 'detailed': 3, 'none': 1, 'trace': 2.
         wfDsqmsIfBestEffortQueueId 1.3.6.1.4.1.18.3.5.1.16.1.1.12 integer read-only
The Queue Id that is selected for best effort traffic for this interface.
         wfDsqmsIfPacketCount 1.3.6.1.4.1.18.3.5.1.16.1.1.13 integer read-only
Number of currently queued packets in DSQMS module on this interface.
         wfDsqmsIfByteCount 1.3.6.1.4.1.18.3.5.1.16.1.1.14 integer read-only
Number of currently queued bytes in DSQMS module on this interface.
         wfDsqmsIfXmitPkts 1.3.6.1.4.1.18.3.5.1.16.1.1.15 counter read-only
Number of xmitted packets from DSQMS module on this interface.
         wfDsqmsIfXmitBytes 1.3.6.1.4.1.18.3.5.1.16.1.1.16 counter read-only
Number of xmitted bytes from DSQMS module on this interface.
         wfDsqmsIfDroppedPkts 1.3.6.1.4.1.18.3.5.1.16.1.1.17 counter read-only
Number of dropped packets from DSQMS module on this interface.
         wfDsqmsIfDroppedBytes 1.3.6.1.4.1.18.3.5.1.16.1.1.18 counter read-only
Number of dropped bytes from DSQMS module on this interface.
         wfDsqmsIfDequeueAtLineRate 1.3.6.1.4.1.18.3.5.1.16.1.1.19 integer read-write
Determines whether the dequeuing from the queues is to be done at the line rate instead of the conventional technique or not. Enumeration: 'disabled': 2, 'enabled': 1.
 wfDsqmsIfQueueTable 1.3.6.1.4.1.18.3.5.1.16.2 no-access
Table of DSQMS (DiffServ Queue Management and Scheduler) queues.
     wfDsqmsIfQueueEntry 1.3.6.1.4.1.18.3.5.1.16.2.1 no-access
DSQMS queue table entry.
         wfDsqmsIfQueueCreate 1.3.6.1.4.1.18.3.5.1.16.2.1.1 integer read-write
Create/Delete parameter. Default is created. Enumeration: 'deleted': 2, 'created': 1.
         wfDsqmsIfQueueEnable 1.3.6.1.4.1.18.3.5.1.16.2.1.2 integer read-write
Enable/Disable parameter. Default is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
         wfDsqmsIfQueueState 1.3.6.1.4.1.18.3.5.1.16.2.1.3 integer read-only
Indicate whether the particular queue is operational. Enumeration: 'active': 1, 'init': 3, 'inactive': 2, 'invalid': 4.
         wfDsqmsIfQueueLineNumber 1.3.6.1.4.1.18.3.5.1.16.2.1.4 integer read-only
Identifies the interface this queue belongs to.
         wfDsqmsIfQueueId 1.3.6.1.4.1.18.3.5.1.16.2.1.5 integer read-only
Identifies the instance of this queue.
         wfDsqmsIfQueueType 1.3.6.1.4.1.18.3.5.1.16.2.1.6 integer read-write
Selects the queue scheduling type, strict priority or weighted round robin. In strict priority, the queues are serviced in the order of highest priority to lowest priority. In weighted round robin, each queue is serviced according to the weights. Enumeration: 'priority': 1, 'weighted': 2.
         wfDsqmsIfQueueBestEffort 1.3.6.1.4.1.18.3.5.1.16.2.1.7 integer read-write
The indication of whether or not this queue is used for best effort traffic. It is default to not a best effort queue. Enumeration: 'yes': 1, 'no': 2.
         wfDsqmsIfQueuePrioLevel 1.3.6.1.4.1.18.3.5.1.16.2.1.8 integer read-write
Priority level for this queue, 0=highest priority. A possible lowest priority can be 29. This parameter is applicable to priority queue only.
         wfDsqmsIfQueuePrioTimeQuantum 1.3.6.1.4.1.18.3.5.1.16.2.1.9 integer read-write
Indicates the maximum amount of time (in msec) the queue is allowed to transmit data. This intends to avoid starvation of other queues. This parameter is applicable to priority queue only.
         wfDsqmsIfQueueCfgPktLimit 1.3.6.1.4.1.18.3.5.1.16.2.1.10 integer read-write
Configured maximum number of packets this queue can hold. If this value is not configured, default to zero, the system will determine the limit based on the number of buffers available and the number of queues configured on the slot.
         wfDsqmsIfQueuePktLimit 1.3.6.1.4.1.18.3.5.1.16.2.1.11 integer read-only
Maximum number of packets this queue can hold. This value is filled in by the system if wfDsqmsIfQueueCfgPktLimit is set to default(0), otherwise it is wfDsqmsIfQueueCfgPktLimit.
         wfDsqmsIfQueueByteLimit 1.3.6.1.4.1.18.3.5.1.16.2.1.12 integer read-write
Maximum number of bytes this queue can hold. Default to zero. If zero, no byte limit.
         wfDsqmsIfQueueCfgWeight 1.3.6.1.4.1.18.3.5.1.16.2.1.13 integer read-write
Indicates the relative ratio of this queue over the sum of all the weighted queues on the same interface. For instance, this queue's CfgWeight is 5 and two other queues' CfgWeight are 3 and 2. This queue will get the weight of 5 over 10 (5+3+2) or 50%. The other queues's weights are 30% and 20%, respectively. This parameter is applicable to weighted queue only.
         wfDsqmsIfQueueWeight 1.3.6.1.4.1.18.3.5.1.16.2.1.14 integer read-only
Actual weight, in percentage, is currently used.
         wfDsqmsIfQueueQuantum 1.3.6.1.4.1.18.3.5.1.16.2.1.15 integer read-only
Amount of data (in bytes) this queue is allowed to transmit per scheduler's invocation. This value is calculated.
         wfDsqmsIfQueueFlowFairnessEnable 1.3.6.1.4.1.18.3.5.1.16.2.1.16 integer read-write
Indicates whether or not hash table should be used. When this parameter is enabled, hash table is used to separate data packets into buckets within this queue. This mechanism will improve the fairness among flows within a queue. Enumeration: 'disabled': 2, 'enabled': 1.
         wfDsqmsIfQueueJitterConst 1.3.6.1.4.1.18.3.5.1.16.2.1.17 integer read-write
Categorizes how sensitive traffic of this queue is to jitter effect, thus this parameter provides an indicator for calculating the bucket quantum. Enumeration: 'small': 1, 'large': 4, 'normal': 2.
         wfDsqmsIfQueueBucketQuantum 1.3.6.1.4.1.18.3.5.1.16.2.1.18 integer read-only
Amount of data (in bytes) a bucket within this queue is allowed to transmit per scheduler's invocation. This value is calculated based on queue quantum and the jitter constant parameters. This parameter is applicable to the flow fairness enable parameter.
         wfDsqmsIfQueueDropType 1.3.6.1.4.1.18.3.5.1.16.2.1.19 integer read-write
Indicates whether or not RED (Random Earlt Detection) is used for active queue management. If disabled, tail drop is used for this queue. This parameter is default to disabled. Enumeration: 'tail-drop': 2, 'red': 1.
         wfDsqmsIfQueuePktCount 1.3.6.1.4.1.18.3.5.1.16.2.1.20 integer read-only
Current number of packets in this queue.
         wfDsqmsIfQueueByteCount 1.3.6.1.4.1.18.3.5.1.16.2.1.21 integer read-only
Current number of bytes in this queue.
         wfDsqmsIfQueueXmitPkts 1.3.6.1.4.1.18.3.5.1.16.2.1.22 counter read-only
Total number of packets transmitted out of this queue since creation or last reset. This is a statistics parameter.
         wfDsqmsIfQueueXmitBytes 1.3.6.1.4.1.18.3.5.1.16.2.1.23 counter read-only
Toal number of bytes transmitted out of this queue since creation or last reset. This is a statistics parameter.
         wfDsqmsIfQueueDroppedPkts 1.3.6.1.4.1.18.3.5.1.16.2.1.24 counter read-only
Total number of packets dropped from this queue since creation or last reset. This is a statistics parameter.
         wfDsqmsIfQueueDroppedBytes 1.3.6.1.4.1.18.3.5.1.16.2.1.25 counter read-only
Total number of bytes dropped from this queue since creation or last reset. This is a statistics parameter.
         wfDsqmsIfQueueRedEwqaGain 1.3.6.1.4.1.18.3.5.1.16.2.1.26 integer read-write
Gain value used in exp-weighted que average calculations. Value is expressed as percent 1%-100%
         wfDsqmsIfQueueRedIdleLossRate 1.3.6.1.4.1.18.3.5.1.16.2.1.27 integer read-write
Rate - derivative from gain value for the case of empty queue. Rate with which average value is diminishes. For instance 30%, means 'Average size diminishes by 30% per second.' Value is expressed as percent 1%-99%
 wfDsqmsIfClassifierTable 1.3.6.1.4.1.18.3.5.1.16.3 no-access
Table of DSQMS (DiffServ Queue Management and Scheduler) classifier.
     wfDsqmsIfClassifierEntry 1.3.6.1.4.1.18.3.5.1.16.3.1 no-access
DSQMS classifier table entry. Classifier entry is used to select the queue and red function for IP packets, based on DS byte in the IP header.
         wfDsqmsIfClassifierCreate 1.3.6.1.4.1.18.3.5.1.16.3.1.1 integer read-write
Create/Delete parameter. Default is created. Enumeration: 'deleted': 2, 'created': 1.
         wfDsqmsIfClassifierLineNumber 1.3.6.1.4.1.18.3.5.1.16.3.1.2 integer read-only
Identifies the interface this classifier belongs to.
         wfDsqmsIfClassifierDSCP 1.3.6.1.4.1.18.3.5.1.16.3.1.3 integer read-only
DS Code Point (DSCP) for this classifier. This is also an identifier for this instance.
         wfDsqmsIfClassifierQueueId 1.3.6.1.4.1.18.3.5.1.16.3.1.4 integer read-write
Indicates the queue to be used for IP packets whose DSCPs match with this classifier's DSCP.
         wfDsqmsIfClassifierRedId 1.3.6.1.4.1.18.3.5.1.16.3.1.5 integer read-write
Indicates the RED function to be used for IP packets whose DSCPs match with this classifier's DSCP. RedId of zero means RED is not applicable for this DSCP in the queue indicated by QueueId parameter.
 wfDsqmsRedTable 1.3.6.1.4.1.18.3.5.1.16.4 no-access
Table of DSQMS (DiffServ Queue Management and Scheduler) RED (Random Early Detection).
     wfDsqmsRedEntry 1.3.6.1.4.1.18.3.5.1.16.4.1 no-access
DSQMS Red table entry. Red entry is used to configure te RED parameters to make up RED drop probability.
         wfDsqmsRedCreate 1.3.6.1.4.1.18.3.5.1.16.4.1.1 integer read-write
Create/Delete parameter. Default is created. Enumeration: 'deleted': 2, 'created': 1.
         wfDsqmsRedId 1.3.6.1.4.1.18.3.5.1.16.4.1.2 integer read-only
Unique identifier.
         wfDsqmsRedCfgStatus 1.3.6.1.4.1.18.3.5.1.16.4.1.3 integer read-only
Enumeration: 'defined': 1, 'notPresent': 8, 'unDefined': 2.
         wfDsqmsRed2ndOrderConst 1.3.6.1.4.1.18.3.5.1.16.4.1.4 integer read-write
Highest order constant
         wfDsqmsRed1stOrderConst 1.3.6.1.4.1.18.3.5.1.16.4.1.5 integer read-write
Lowest order constant
         wfDsqmsRedMinTh 1.3.6.1.4.1.18.3.5.1.16.4.1.6 integer read-write
Lower portion of the average queue value (percent) where prob. of being dropped is always 0 (zero)
         wfDsqmsRedMaxTh 1.3.6.1.4.1.18.3.5.1.16.4.1.7 integer read-write
Upper portion of the average queue value (percent) where prob. of being dropped is always 0 (zero)