Wellfleet-BOT-MIB: View SNMP OID List / Download MIB

VENDOR: WELLFLEET


 Home MIB: Wellfleet-BOT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, Wellfleet-COMMON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wfBot 1.3.6.1.4.1.18.3.5.18.1
     wfBotDelete 1.3.6.1.4.1.18.3.5.18.1.1 integer read-write
Create/Delete parameter. Default is created. User perform an SNMP SET operation on this object in order to create/delete BOT Enumeration: 'deleted': 2, 'created': 1.
     wfBotDisable 1.3.6.1.4.1.18.3.5.18.1.2 integer read-write
Enable/Disable parameter. Default is enabled. User perform an SNMP SET operation on this object in order to enable/disable BOT Enumeration: 'disabled': 2, 'enabled': 1.
     wfBotState 1.3.6.1.4.1.18.3.5.18.1.3 integer read-only
The current state of BOT Enumeration: 'down': 2, 'init': 3, 'up': 1, 'notpresent': 4.
 wfBotInterfaceTable 1.3.6.1.4.1.18.3.5.18.2 no-access
Interface table which lists all BISYNC line entries and other line related information
     wfBotInterfaceEntry 1.3.6.1.4.1.18.3.5.18.2.1 no-access
An entry in wfBotInterfaceTable
         wfBotInterfaceDelete 1.3.6.1.4.1.18.3.5.18.2.1.1 integer read-write
Create/Delete attribute. Default is Created Users perform SNMP SET operation on this object in order to create/delete a translation interface record Enumeration: 'deleted': 2, 'created': 1.
         wfBotInterfaceDisable 1.3.6.1.4.1.18.3.5.18.2.1.2 integer read-write
Enables/Disables this mapping entry Setting of this attribute to DISABLED will disconnect all active sessions pertaining to this interface entry Enumeration: 'disabled': 2, 'enabled': 1.
         wfBotInterfaceCctNumber 1.3.6.1.4.1.18.3.5.18.2.1.3 integer read-only
The circuit from which the connection attempt is received that initiates a translation session.
         wfBotInterfaceSlotNumber 1.3.6.1.4.1.18.3.5.18.2.1.4 integer read-only
Slot number on which this interface is running
         wfBotInterfaceState 1.3.6.1.4.1.18.3.5.18.2.1.5 integer read-only
The current state of the Interface Enumeration: 'down': 2, 'init': 3, 'up': 1.
         wfBotInterfaceType 1.3.6.1.4.1.18.3.5.18.2.1.6 integer read-write
If this interface is point-to-point, i.e. no splitting occours we can straight away deliver BSC frame to designated TCP circuit, without looking into the CU address Enumeration: 'singledrop': 1, 'multidrop': 2.
         wfBotInterfaceAttachedTo 1.3.6.1.4.1.18.3.5.18.2.1.7 integer read-write
Information that this interface is attached to the Primary or secondary BSC station Enumeration: 'primary': 1, 'secondary': 2.
         wfBotInterfacePktCnt 1.3.6.1.4.1.18.3.5.18.2.1.8 counter read-only
Interface packet count ...
         wfBotKeepaliveInterval 1.3.6.1.4.1.18.3.5.18.2.1.9 integer read-write
Idle session timeout period, in seconds. If an established TCP connection remains inactive for this interval, KEEPALIVE messages will be sent to the peer (if the Keepalive Timer is non-zero). Setting the Idle Timer to zero disables the keepalive feature.
         wfBotKeepaliveRto 1.3.6.1.4.1.18.3.5.18.2.1.10 integer read-write
KEEPALIVE retransmit timeout period, in seconds. This is the interval at which unacknowledged KEEPALIVE messages will be retransmitted. If the Idle Timer is set to zero, this timer ignored. If the Idle Timer is non-zero and this timer IS zero, no KEEPALIVEs are sent and the session is terminated upon expiration of the Idle Timer.
         wfBotKeepaliveMaxRetry 1.3.6.1.4.1.18.3.5.18.2.1.11 integer read-write
Number of unacknowledged KEEPALIVE messages retransmitted before the TCP session is terminated. If this count is set to zero, only one KEEPALIVE message will be sent.
 wfBotPeerTable 1.3.6.1.4.1.18.3.5.18.3 no-access
Peer table lists all TCP connections this router will have with its peers
     wfBotPeerEntry 1.3.6.1.4.1.18.3.5.18.3.1 no-access
An entry in wfBotPeerTable
         wfBotPeerEntryDelete 1.3.6.1.4.1.18.3.5.18.3.1.1 integer read-write
Create/Delete attribute. Default is Created Users perform SNMP SET operation on this object in order to create/delete a peer record Enumeration: 'deleted': 2, 'created': 1.
         wfBotPeerEntryDisable 1.3.6.1.4.1.18.3.5.18.3.1.2 integer read-write
Enables/Disables this mapping entry Setting of this attribute to DISABLED will disconnect all active sessions pertaining to this interface entry Enumeration: 'disabled': 2, 'enabled': 1.
         wfBotPeerSlotNumber 1.3.6.1.4.1.18.3.5.18.3.1.3 integer read-only
Slot number on which this peer entry is configured
         wfBotPeerCctNumber 1.3.6.1.4.1.18.3.5.18.3.1.4 integer read-only
The circuit from which the connection attempt is received that initiates a translation session.
         wfBotPeerRemoteIpAddr 1.3.6.1.4.1.18.3.5.18.3.1.5 ipaddress read-only
IP Address of the remote host with which this translation session is established.
         wfBotConnOriginator 1.3.6.1.4.1.18.3.5.18.3.1.6 integer read-only
Upon start up, based on the configuration either partner is going to initiate TCP conn. or myself Enumeration: 'partner': 2, 'self': 1.
         wfBotPeerLocalTcpListenPort 1.3.6.1.4.1.18.3.5.18.3.1.7 integer read-only
Based on the field wfBotConnOriginator, SiteManager will allow user to configure only one of following two fields: if Originator = SELF then through SiteManager ask user to enter PeerTcpListenPort# else through SiteManager ask user to enter LocalTcpListenPort# So, in any case one of the two fields will have NULL_VALUE.
         wfBotPeerRemoteTcpListenPort 1.3.6.1.4.1.18.3.5.18.3.1.8 integer read-only
Peer listen port for TCP connection
         wfBotPeerLocalTcpPort 1.3.6.1.4.1.18.3.5.18.3.1.9 integer read-only
When TCP connection is established, we will have other TCP port number available which is assigned by the system from the available pool. We will fill in this information here in this READ_ONLY variable. Again, based on Originator only one of the following two fields will have valid value. if Originator = SELF then fill in LocalTcpPort field inside the BOT module else fill in PeerTcpPort field inside the BOT module In short, ========= For Originator = SELF PeerTcpListenPort and LocalTcpPort entries are valid For Originator = PARTNER LocalTcpListenPort and PeerTcpPort entries are valid
         wfBotPeerRemoteTcpPort 1.3.6.1.4.1.18.3.5.18.3.1.10 integer read-only
Peer TCP port of the connection
 wfBotCUTable 1.3.6.1.4.1.18.3.5.18.4 no-access
CU table lists all CUs reachable from this router on all TCP connections listed in PEER_TABLE
     wfBotCUEntry 1.3.6.1.4.1.18.3.5.18.4.1 no-access
An entry in wfBotCUTable
         wfBotCUEntryDelete 1.3.6.1.4.1.18.3.5.18.4.1.1 integer read-write
Create/Delete attribute. Default is Created Users perform SNMP SET operation on this object in order to create/delete a peer record Enumeration: 'deleted': 2, 'created': 1.
         wfBotCUEntryDisable 1.3.6.1.4.1.18.3.5.18.4.1.2 integer read-write
Enables/Disables this cu entry Setting of this attribute to DISABLED will disconnect active TCP conn. pertaining to the peer entry Enumeration: 'disabled': 2, 'enabled': 1.
         wfBotCUSlotNumber 1.3.6.1.4.1.18.3.5.18.4.1.3 integer read-only
slot number used as an index
         wfBotCUCctNumber 1.3.6.1.4.1.18.3.5.18.4.1.4 integer read-only
The circuit from which the connection attempt is CCT number for easy link between peer table and cu table
         wfBotCURemoteIpAddr 1.3.6.1.4.1.18.3.5.18.4.1.5 ipaddress read-only
IP Address of the remote host with which this translation session is established.
         wfBotCULocalTcpListenPort 1.3.6.1.4.1.18.3.5.18.4.1.6 integer read-only
As mentioned earlier only one of following two field will have a valid value, while other will be NULL_VAL, based on who is the ConnOriginator
         wfBotCURemoteTcpListenPort 1.3.6.1.4.1.18.3.5.18.4.1.7 integer read-only
field from the peer table entry
         wfBotCUAddrReachable 1.3.6.1.4.1.18.3.5.18.4.1.8 integer read-only
In BISYNC controller addresses range from 0-31. In MDL currently there is no way to represent the integer range. As lower bound is zero, here we specify only max possible Enumeration: 'address': 254.