WWP-LEOS-RSVPTE-MIB: View SNMP OID List / Download MIB

VENDOR: WORLD WIDE PACKETS


 Home MIB: WWP-LEOS-RSVPTE-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, WWP-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wwpLeosRsvpteMIB 1.3.6.1.4.1.6141.2.60.30
Added new objects wwpLeosRsvpteIfHelloInterval,wwpLeosRsvpteIfHelloTolerance, wwpLeosRsvpteIfAdvertisedLabel.
       wwpLeosRsvpteMIBObjects 1.3.6.1.4.1.6141.2.60.30.1
           wwpLeosRsvpteObjects 1.3.6.1.4.1.6141.2.60.30.1.1
               wwpLeosRsvpteAdminStatus 1.3.6.1.4.1.6141.2.60.30.1.1.1 integer read-write
The desired administrative state of RSVP-TE. Enumeration: 'enable': 1, 'disable': 2.
               wwpLeosRsvpteOperStatus 1.3.6.1.4.1.6141.2.60.30.1.1.2 integer read-only
The current operational state of RSVP-TE. Enumeration: 'down': 2, 'actFailed': 5, 'goingUp': 3, 'up': 1, 'goingDown': 4.
               wwpLeosRsvpteRetryInterval 1.3.6.1.4.1.6141.2.60.30.1.1.3 unsigned32 read-write
The persistent tunnel retry interval. This is the interval between the first failure of a persistent tunnel and the first attempt to re-establish the tunnel. This cannot be changed while admin status is enable or oper status is up
               wwpLeosRsvpteRetryInfiniteState 1.3.6.1.4.1.6141.2.60.30.1.1.4 integer read-write
The persistent tunnel retry infinity. This is the State which when on will trigger RSVP-TE to try to restore the tunnels infinite times. This object can only be set if RSVP-TE is globally disabled. Enumeration: 'on': 1, 'off': 2.
               wwpLeosRsvpteRetryMax 1.3.6.1.4.1.6141.2.60.30.1.1.5 integer read-only
The maximum number of retry attempts that will be made before a persistent tunnel is deemed inoperable. Once in this state, a management agent should set mplsTunnelAdminStatus to 'up' to attempt to reestablish the tunnel. This field is not used when wwpLeosRsvpteRetryInfiniteState is on
               wwpLeosRsvpteRefreshInterval 1.3.6.1.4.1.6141.2.60.30.1.1.6 integer32 read-only
This RSVP-TE value, R, which is used to set the average interval between refresh path and resv messages.
               wwpLeosRsvpteRefreshMultiple 1.3.6.1.4.1.6141.2.60.30.1.1.7 integer32 read-only
The RSVP-TE value, K, which is the number of unresponded Path or Resv refresh attempts which must be made, spaced by the refresh interval before the state is deemed to have timed out.
               wwpLeosRsvpteRfrshSlewDenom 1.3.6.1.4.1.6141.2.60.30.1.1.8 integer32 read-only
The denominator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value.
               wwpLeosRsvpteRfrshSlewNumerator 1.3.6.1.4.1.6141.2.60.30.1.1.9 integer32 read-only
The numerator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is increased by this fraction until it reaches the new desired value.
               wwpLeosRsvpteBlockadeMultiple 1.3.6.1.4.1.6141.2.60.30.1.1.10 integer32 read-only
The RSVP-TE value, Kb, which is the number of refresh timeout periods after which blockade state is deleted.
               wwpLeosRsvpteLSPSetupPriority 1.3.6.1.4.1.6141.2.60.30.1.1.11 integer32 read-only
The setup priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be numerically more or equal (so lower or equal priority) than the value of the holding priority object.
               wwpLeosRsvpteLSPHoldingPriority 1.3.6.1.4.1.6141.2.60.30.1.1.12 integer32 read-only
The holding priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be numerically less or equal (so higher or equal priority) than the value of the holding priority object.
               wwpLeosRsvpteUseHopByHop 1.3.6.1.4.1.6141.2.60.30.1.1.13 truthvalue read-only
A flag to indicate that RSVP-TE should use the hop by hop addressing scheme for PATH and PATH-TEAR messages it sends. If set then the IP addresses used in the IP header of PATH messages forwarded by RSVP-TE set source as the local outgoing interface IP address, and destination as the next hop router IP address.
               wwpLeosRsvpteRestartCapable 1.3.6.1.4.1.6141.2.60.30.1.1.14 truthvalue read-only
A flag to indicate whether the local node should advertise itself as restart capable.
               wwpLeosRsvpteRestartTime 1.3.6.1.4.1.6141.2.60.30.1.1.15 unsigned32 read-only
The time in milliseconds that the local node takes to restart RSVP-TE and the communication channel used for RSVP-TE communication. This is advertised to neighbors in the Restart_Cap object in Hello messages. Only used if wwpLeosRsvpteRestartCapable is set to true.
               wwpLeosRsvpteRecoveryTime 1.3.6.1.4.1.6141.2.60.30.1.1.16 unsigned32 read-only
The period of time in milliseconds that the local node would like neighbors to take to resyncronize RSVP-TE and MPLS forwarding information after the re-establishment of Hello connectivity. This is advertised to neighbors in the Restart_Cap object in Hello messages. A value of zero indicates that the node does not support resynchronization following failure of the local node. A value of 0xFFFFFFFF indicates an infinite recovery time. Only used if wwpLeosRsvpteRestartCapable is set to true.
               wwpLeosRsvpteMinPeerRestart 1.3.6.1.4.1.6141.2.60.30.1.1.17 integer32 read-only
The mininum period of time in milliseconds that RSVP-TE should wait for a restart capable neighbor to regain Hello connectivity before invoking procedures related to communication loss. RSVP-TE will wait for the maximum of this time and the restart_time advertised in the RESTART_CAP object in Hello messages from the neighbor.
           wwpLeosRsvpte 1.3.6.1.4.1.6141.2.60.30.1.2
               wwpLeosRsvpteIfTable 1.3.6.1.4.1.6141.2.60.30.1.2.1 no-access
A table of interfaces that RSVP-TE can be enabled on.
                   wwpLeosRsvpteIfEntry 1.3.6.1.4.1.6141.2.60.30.1.2.1.1 no-access
WWP Descr.
                       wwpLeosRsvpteIfName 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.1 displaystring read-only
Interface Name
                       wwpLeosRsvpteIfIndex 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.2 integer no-access
Interface Index
                       wwpLeosRsvpteIfIpAddr 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.3 ipaddress read-only
Interface IP Address
                       wwpLeosRsvpteIfMtu 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.4 integer read-write
RSVP-TE Interface MTU
                       wwpLeosRsvpteIfAdminStatus 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.5 integer read-write
Desired RSVP-TE status on this Interface Enumeration: 'enable': 1, 'disable': 2.
                       wwpLeosRsvpteIfOperStatus 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.6 integer read-only
RSVP-TE Operational Status on this Interface Enumeration: 'down': 2, 'up': 1.
                       wwpLeosRsvpteIfHelloInterval 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.7 unsigned32 read-write
RSVP-TE hello message interval.
                       wwpLeosRsvpteIfHelloTolerance 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.8 unsigned32 read-write
RSVP-TE hello tolerance defines number of hello interval which may pass without receiving a successful Hello message from a partner before the Hello session times out.
                       wwpLeosRsvpteIfAdvertisedLabel 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.9 advertisedlabel read-write
This attribute decides what kind of a Label will be advertised by RSVP-TE for a Label Request received on this L3 Interface