WS-SW-IGMP-SNOOP-MIB: View SNMP OID List / Download MIB

VENDOR: SYMBOL TECHNOLOGIES


 Home MIB: WS-SW-IGMP-SNOOP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, WS-SW-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 wsSwIgmpSnoopMibModule 1.3.6.1.4.1.388.14.2.17.1
IGMP SNOOP MIB module defines the configuration parameters for the IGMP Snoop feature which is used to optimize the multicast traffic using IGMP protocol.
     wsSwIgmpSnoopMIB 1.3.6.1.4.1.388.14.2.17.1.1
         wsSwIgmpSnoopScalars 1.3.6.1.4.1.388.14.2.17.1.1.1
             wsSwIgmpSnoopEnableDefault 1.3.6.1.4.1.388.14.2.17.1.1.1.1 truthvalue read-write
By Default IGMP Snooping is enabled. The default value is TRUE.
             wsSwIgmpSnoopUnknownMcastFwdDefault 1.3.6.1.4.1.388.14.2.17.1.1.1.2 truthvalue read-write
This configures the default behaviour for unknown multicast forward for all Vlans. Enabling unknown multicast packets will cause flooding of multicast packets which fall outside the range of 224.0.0.X and have not been joined by any host. Disabling will cause forwarding of such packets only to multicast router ports. The default value is FALSE.
             wsSwIgmpSnoopQuerierEnableDefault 1.3.6.1.4.1.388.14.2.17.1.1.1.3 truthvalue read-write
Enable/Disable IGMP Snooping Querier at global level. The default value is disabled(FALSE).
             wsSwIgmpSnoopQuerierVersionDefault 1.3.6.1.4.1.388.14.2.17.1.1.1.4 integer read-write
The default IGMP Version for the queries to be generated by the querier. The default value is igmpv3(3) version. Enumeration: 'igmpv3': 3, 'igmpv2': 2, 'igmpv1': 1.
             wsSwIgmpSnoopQuerierMaxResponseTimeDefault 1.3.6.1.4.1.388.14.2.17.1.1.1.5 integer32 read-write
The default IGMP Querier maximum response time used in building IGMP V2/V3 queries, indicating the maximum time in seconds in which the interested hosts should respond back with a report. The default value is 10 seconds.
             wsSwIgmpSnoopQuerierPresentTimeoutDefault 1.3.6.1.4.1.388.14.2.17.1.1.1.6 integer32 read-write
The default timeout value for the external IGMP querier connected to the switch. This value is used to start of the local Querier to send the locally generated IGMP query based on the Querier configuration when ever the Multicast router goes away and a Query loss is detected. The default value is 60 seconds.
             wsSwIgmpSnoopQuerierQueryIntervalDefault 1.3.6.1.4.1.388.14.2.17.1.1.1.7 integer32 read-write
The default query interval which will be used by the IGMP querier to build and send the locally generated IGMP queries periodically. The configured query interval will be common across all VLAN. The default value is 60 seconds.
             wsSwIgmpSnoopQuerierIPAddressDefault 1.3.6.1.4.1.388.14.2.17.1.1.1.8 ipaddress read-write
The Default source IP Address used by the querier as source IP while generating the IGMP queries. The default value is 0.0.0.0.
         wsSwIgmpSnoopVlanConfigTable 1.3.6.1.4.1.388.14.2.17.1.1.2 no-access
Configures IGMP Snooping configuration per Vlan. User can provide static multicast router ports for each vlan and needs to configure the learning mode to be static in case he is configuring static entries else write will fail.
             wsSwIgmpSnoopVlanConfigEntry 1.3.6.1.4.1.388.14.2.17.1.1.2.1 no-access
An entry in wsSwIgmpSnoopingVlanConfigTable
                 wsSwIgmpSnoopVlanIndex 1.3.6.1.4.1.388.14.2.17.1.1.2.1.1 integer32 read-only
The Index for the current table and is the actual VLAN's configured on the switch.
                 wsSwIgmpSnoopEnable 1.3.6.1.4.1.388.14.2.17.1.1.2.1.2 truthvalue read-write
Enable/Disable IGMP Snooping on this Vlan. By Default IGMP Snooping is enabled. The default value is TRUE.
                 wsSwIgmpSnoopUnknownMcastFwd 1.3.6.1.4.1.388.14.2.17.1.1.2.1.3 truthvalue read-write
Enabling unknown multicast packets will cause flooding of multicast packets which fall outside the range of 224.0.0.X and have not been joined by any host. Disabling will cause forwarding of such packets only to multicast router ports. The Default value if False.
                 wsSwIgmpSnoopLearningMode 1.3.6.1.4.1.388.14.2.17.1.1.2.1.4 integer read-write
This object specifies the multicast router port learning method for IGMP Snooping as described below: pimDvmrp(1) : Protocol Independent Multicast and Distance Vector static(2) : Static entry The Default value is pimDvmrp(1). Enumeration: 'pimDvmrp': 1, 'static': 2.
                 wsSwIgmpSnoopMrouterSetStaticPort 1.3.6.1.4.1.388.14.2.17.1.1.2.1.5 octet string read-write
In case if the learning of multicast router ports is static then one can do a set operation over this OID to configure the set of physical ports for this vlan where the Multicast routers are connected. If learn mode is pim-dvmrp the set over this OID will give a commit fail as an error condition. For multiple ports to be configured user can give comma separated port names Eg. ge1,ge3.
         wsSwIgmpSnoopQuerierTable 1.3.6.1.4.1.388.14.2.17.1.1.3 no-access
This table provides the configuration for the IGMP Querier which is used to send out the IGMP general queries locally in the absence of any external Querier.
             wsSwIgmpSnoopQuerierEntry 1.3.6.1.4.1.388.14.2.17.1.1.3.1 no-access
An entry in the wsSwIgmpSnoopQuerierTable.
                 wsSwIgmpSnoopQuerierVlanIndex 1.3.6.1.4.1.388.14.2.17.1.1.3.1.1 integer32 read-only
The Index for the current table and is the actual VLAN's configured on the switch.
                 wsSwIgmpSnoopQuerierEnable 1.3.6.1.4.1.388.14.2.17.1.1.3.1.2 truthvalue read-write
Enable/Disable IGMP Snooping Querier on this Vlan. By Default IGMP Snooping Querier is disabled. The default value is FALSE.
                 wsSwIgmpSnoopQuerierVersion 1.3.6.1.4.1.388.14.2.17.1.1.3.1.3 integer read-write
The IGMP Version for the queries to be generated by the querier. The Default value is igmpv3(3) version. Enumeration: 'igmpv3': 3, 'igmpv2': 2, 'igmpv1': 1.
                 wsSwIgmpSnoopQuerierMaxResponseTime 1.3.6.1.4.1.388.14.2.17.1.1.3.1.4 integer read-write
The IGMP Querier maximum response time used in building IGMP V2/V3 queries, indicating the maximum time in seconds in which the interested hosts should resond back with a report.
                 wsSwIgmpSnoopQuerierPresentTimeout 1.3.6.1.4.1.388.14.2.17.1.1.3.1.5 integer read-write
The timeout value for the external IGMP querier connected to the switch. This value is used to start of the local Querier to send the locally generated IGMP query based on the Querier configuration when ever the Multicast router goes away and a Query loss is detected.
                 wsSwIgmpSnoopQuerierIPAddress 1.3.6.1.4.1.388.14.2.17.1.1.3.1.6 ipaddress read-write
The source IP Address used by the querier while generating the IGMP queries. By default this is zero. If the querier is enabled and it's IP address is not configured then switch will try to the following IP address in the given prefrence: 1. Use the Querier global default IP address. 2. use the corresponding SVI IP. 3. Try to use the first occurring IP address among all the interfaces. If none of the above has been configured for an IP address then it will not send send out the query.
                 wsSwIgmpSnoopQuerierOperationalState 1.3.6.1.4.1.388.14.2.17.1.1.3.1.7 integer read-only
This OID shows the operational status of the Querier. The Querier goes to non-querier state when ever wireless switch detects a query coming from a Multicast router or any other querier from an external network. In the absence of a multicast router or a query loss is detected and if the IGMP Querier is enabled globally and on this vlan then it will move to querier state. Enumeration: 'disabled': 3, 'nonquerier': 2, 'querier': 1.
         wsSwIgmpSnoopConf 1.3.6.1.4.1.388.14.2.17.1.1.20
               wsSwIgmpSnoopGroups 1.3.6.1.4.1.388.14.2.17.1.1.20.1
                   wsSwIgmpSnoopObjectGroup 1.3.6.1.4.1.388.14.2.17.1.1.20.1.1
Description.
               wsSwIgmpSnoopCompliances 1.3.6.1.4.1.388.14.2.17.1.1.20.2
                   wsSwIgmpSnoopCompliance 1.3.6.1.4.1.388.14.2.17.1.1.20.2.1
Description.