UX25-MIB: View SNMP OID List / Download MIB

VENDOR: UTSTARCOM INCORPORATED


 Home MIB: UX25-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usr 1.3.6.1.4.1.429
         nas 1.3.6.1.4.1.429.1
             ux25 1.3.6.1.4.1.429.1.10
                   ux25AdmnChannelTable 1.3.6.1.4.1.429.1.10.1 no-access
Defines objects for the parameters of an X.25 interface which the administrator can read and set.
                       ux25AdmnChannelEntry 1.3.6.1.4.1.429.1.10.1.1 no-access
Entries of ux25AdmnChannelTable.
                           ux25AdmnChanneIndex 1.3.6.1.4.1.429.1.10.1.1.1 integer read-only
A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity entry in the entity table of the chassis MIB.
                           ux25AdmnNetMode 1.3.6.1.4.1.429.1.10.1.1.2 integer read-write
Selects the network protocol to be used. Default=x2584(3). Enumeration: 'datexP': 12, 'x2580': 4, 'x2588': 2, 'x2584': 3, 'austpac': 6, 'ddxP': 13, 'ddn': 8, 'datanet': 18, 'datapak': 17, 'datapac': 7, 'fDatapac': 21, 'accunet': 15, 'transpac': 10, 'pss': 5, 'dcs': 19, 'tymnet': 11, 'telepac': 20, 'venusP': 14, 'telenet': 9, 'pacnet': 23, 'itapac': 16, 'luxpac': 24, 'x25Llc': 1, 'finpac': 22.
                           ux25AdmnProtocolVersion 1.3.6.1.4.1.429.1.10.1.1.3 integer read-write
Determines the X.25 protocol version being used on the network. A network mode of X25_LLC overides this field to the 1984 standard. Default=x25ver84(3). Enumeration: 'x25ver80': 1, 'x25ver88': 3, 'x25ver84': 2.
                           ux25AdmnInterfaceMode 1.3.6.1.4.1.429.1.10.1.1.4 integer read-write
Indicates the DTE/DCE nature of the link. The DXE parameter is resolved using ISO 8208 for DTE-DTE operation. Default=dteMode(2). Enumeration: 'dxeMode': 3, 'dceMode': 1, 'dteMode': 2.
                           ux25AdmnLowestPVCVal 1.3.6.1.4.1.429.1.10.1.1.5 integer read-write
Low end of the Permanent Virtual Circuit range. If both the Low and High ends of the range are set to 0 there are no PVCs. Default=0.
                           ux25AdmnHighestPVCVal 1.3.6.1.4.1.429.1.10.1.1.6 integer read-write
High end of the Permanent Virtual Circuit range. If both the Low and High ends of the range are set to 0 there are no PVCs. Default=0.
                           ux25AdmnChannelLIC 1.3.6.1.4.1.429.1.10.1.1.7 integer read-write
Low end of the one-way incoming logical channel. If both Low and High ends of the channel are set to 0, there are no one-way incoming channels. Default=0.
                           ux25AdmnChannelHIC 1.3.6.1.4.1.429.1.10.1.1.8 integer read-write
High end of the one-way incoming logical channel. If both Low and High ends of the channel are set to 0, there are no one-way incoming channels. Default=0.
                           ux25AdmnChannelLTC 1.3.6.1.4.1.429.1.10.1.1.9 integer read-write
Low end of the two-way incoming logical channel. If both Low and High ends of the channel are set to 0, there are no two-way incoming channels. Default=1024.
                           ux25AdmnChannelHTC 1.3.6.1.4.1.429.1.10.1.1.10 integer read-write
High end of the two-way incoming logical channel. If both Low and High ends of the channel are set to 0, there are no two-way incoming channels. Default=1087.
                           ux25AdmnChannelLOC 1.3.6.1.4.1.429.1.10.1.1.11 integer read-write
Low end of the one-way outgoing logical channel. If both Low and High ends of the channel are set to 0, there are no one-way outgoing channels. Default=0.
                           ux25AdmnChannelHOC 1.3.6.1.4.1.429.1.10.1.1.12 integer read-write
High end of the one-way outgoing logical channel. If both Low and High ends of the channel are set to 0, there are no one-way outgoing channels. Default=0.
                   ux25AdmnClassTable 1.3.6.1.4.1.429.1.10.2 no-access
Defines objects for the parameters of an X.25 interface which the administrator can read and set.
                       ux25AdmnClassEntry 1.3.6.1.4.1.429.1.10.2.1 no-access
Entries of ux25AdmnClassTable.
                           ux25AdmnClassIndex 1.3.6.1.4.1.429.1.10.2.1.1 integer read-only
A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity entry in the entity table of the chassis MIB.
                           ux25AdmnLocMaxThruPutClass 1.3.6.1.4.1.429.1.10.2.1.2 integer read-write
The maximum value of the throughput class Quality of Service parameter which is supported. According to ISO 8208 this parameter is bounded in the range >=3 and <=12 corresponding to a range 75 to 48000 bits/second. The range supported here is 0 to 15 for non-standard X.25 implementations, which use the Throughput Class Window/Packet Parameters (Group II). Default=12. Enumeration: 'tc1200': 8, 'tc600': 7, 'tc150': 5, 'tc2400': 9, 'tc9600': 11, 'tc19200': 12, 'tcReserved2': 3, 'tcReserved0': 1, 'tc75': 4, 'tc48000': 13, 'tcReserved13': 14, 'tcReserved14': 15, 'tcReserved15': 16, 'tc300': 6, 'tc4800': 10, 'tcReserved1': 2.
                           ux25AdmnRemMaxThruPutClass 1.3.6.1.4.1.429.1.10.2.1.3 integer read-write
The maximum value of the throughput class Quality of Service parameter which is supported. According to ISO 8208 this parameter is bounded in the range >=3 and <=12 corresponding to a range 75 to 48000 bits/second. The range supported here is 0 to 15 for non-standard X.25 implementations, which use the Throughput Class Window/Packet Parameters (Group II). Default=12. Enumeration: 'tc1200': 8, 'tc600': 7, 'tc150': 5, 'tc2400': 9, 'tc9600': 11, 'tc19200': 12, 'tcReserved2': 3, 'tcReserved0': 1, 'tc75': 4, 'tc48000': 13, 'tcReserved13': 14, 'tcReserved14': 15, 'tcReserved15': 16, 'tc300': 6, 'tc4800': 10, 'tcReserved1': 2.
                           ux25AdmnLocDefThruPutClass 1.3.6.1.4.1.429.1.10.2.1.4 integer read-write
The default throughput class that is defined for the local-to-remote direction. In some networks, such as TELENET, negotiation of throughput class is constrained to be towards a configured default throughput class. In other PSDNs, this value should be set equal to the value of the Maximum Local Throughput Class. Default=12. Enumeration: 'tc1200': 8, 'tc600': 7, 'tc150': 5, 'tc2400': 9, 'tc9600': 11, 'tc19200': 12, 'tcReserved2': 3, 'tcReserved0': 1, 'tc75': 4, 'tc48000': 13, 'tcReserved13': 14, 'tcReserved14': 15, 'tcReserved15': 16, 'tc300': 6, 'tc4800': 10, 'tcReserved1': 2.
                           ux25AdmnRemDefThruPutClass 1.3.6.1.4.1.429.1.10.2.1.5 integer read-write
The default throughput class value defined for remote-to-local direction. In some networks, such as TELENET, negotiation of throughput class is constrained to be towards a configured default throughput class. In other PSDNs, this value should be set equal to the value of the Maximum Remote Throughput Class. Default=12. Enumeration: 'tc1200': 8, 'tc600': 7, 'tc150': 5, 'tc2400': 9, 'tc9600': 11, 'tc19200': 12, 'tcReserved2': 3, 'tcReserved0': 1, 'tc75': 4, 'tc48000': 13, 'tcReserved13': 14, 'tcReserved14': 15, 'tcReserved15': 16, 'tc300': 6, 'tc4800': 10, 'tcReserved1': 2.
                           ux25AdmnLocMinThruPutClass 1.3.6.1.4.1.429.1.10.2.1.6 integer read-write
According to ISO 8208, the throughput class parameter is defined in the range of >=3 to <=12. Some PSDNs may provide different mapping, in which case, this parameter is the minimum value. Default=3. Enumeration: 'tc1200': 8, 'tc600': 7, 'tc150': 5, 'tc2400': 9, 'tc9600': 11, 'tc19200': 12, 'tcReserved2': 3, 'tcReserved0': 1, 'tc75': 4, 'tc48000': 13, 'tcReserved13': 14, 'tcReserved14': 15, 'tcReserved15': 16, 'tc300': 6, 'tc4800': 10, 'tcReserved1': 2.
                           ux25AdmnRemMinThruPutClass 1.3.6.1.4.1.429.1.10.2.1.7 integer read-write
According to ISO 8208, the throughput class parameter is defined in the range of >=3 to <=12. Some PSDNs may provide different mapping, in which case, this parameter is the minimum value. Default=3. Enumeration: 'tc1200': 8, 'tc600': 7, 'tc150': 5, 'tc2400': 9, 'tc9600': 11, 'tc19200': 12, 'tcReserved2': 3, 'tcReserved0': 1, 'tc75': 4, 'tc48000': 13, 'tcReserved13': 14, 'tcReserved14': 15, 'tcReserved15': 16, 'tc300': 6, 'tc4800': 10, 'tcReserved1': 2.
                           ux25AdmnThclassNegToDef 1.3.6.1.4.1.429.1.10.2.1.8 integer read-write
Determines if throughput class negotiation will be used for certain network procedures. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnThclassType 1.3.6.1.4.1.429.1.10.2.1.9 integer read-write
Defines which throughput class encodings can be used to assign packet and window sizes. Some implementations of X.25 do not use the X.25 packet and window negotiation and rely on mapping the throughput class to these parameters. Default=noTcType(1). Enumeration: 'loNibble': 2, 'noTcType': 1, 'highNibble': 3, 'bothNibbles': 4.
                           ux25AdmnThclassWinMap 1.3.6.1.4.1.429.1.10.2.1.10 displaystring read-write
The mapping between throughput class and a window parameter. Each number has a range of 1 to 127. Default=3.3.3.3.3.3.3.3.3.3.3.3.3.3.3.3
                           ux25AdmnThclassPackMap 1.3.6.1.4.1.429.1.10.2.1.11 displaystring read-write
The mapping between the throughput class and a packet parameter. Each number has a range of 4 to 12. Default=7.7.7.7.7.7.7.7.7.7.7.7.7.7.7.7
                   ux25AdmnPacketTable 1.3.6.1.4.1.429.1.10.3 no-access
Defines objects for the parameters of an X.25 interface which the administrator can read and set.
                       ux25AdmnPacketEntry 1.3.6.1.4.1.429.1.10.3.1 no-access
Entries of ux25AdmnPacketTable.
                           ux25AdmnPacketIndex 1.3.6.1.4.1.429.1.10.3.1.1 integer read-only
A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity entry in the entity table of the chassis MIB.
                           ux25AdmnPktSequencing 1.3.6.1.4.1.429.1.10.3.1.2 integer read-write
Indicates whether modulo 8 or 128 sequence numbering operates on the network. Default=pktSeq8(16). Enumeration: 'pktSeq8': 16, 'pktSeq128': 32.
                           ux25AdmnLocMaxPktSize 1.3.6.1.4.1.429.1.10.3.1.3 integer read-write
Maximum acceptable size of packets in the local-to-remote direction. On an incoming call, a value for the packet size parameter greater than this value will be negotiated down to an acceptable size when the call is accepted. Default=maxPktSz256(8). Enumeration: 'maxPktSz128': 7, 'maxPktSz512': 9, 'maxPktSz256': 8.
                           ux25AdmnRemMaxPktSize 1.3.6.1.4.1.429.1.10.3.1.4 integer read-write
Maximum acceptable size of packets in the remote-to-local direction. On an incoming call, a value for the packet size parameter greater than this value will be negotiated down to an acceptable size when the call is accepted. Default=maxPktSz256(8). Enumeration: 'maxPktSz128': 7, 'maxPktSz512': 9, 'maxPktSz256': 8.
                           ux25AdmnLocDefPktSize 1.3.6.1.4.1.429.1.10.3.1.5 integer read-write
Specifies the value of the default packet size for the direction local-to-remote, which may be nonstandard, provided the value is agreed between the communicating parties on the LAN or between the DTE and DCE. Default=defPktSz256(8). Enumeration: 'defPktSz128': 7, 'defPktSz512': 9, 'defPktSz64': 6, 'defPktSz32': 5, 'defPktSz16': 4, 'defPktSz256': 8.
                           ux25AdmnRemDefPktSize 1.3.6.1.4.1.429.1.10.3.1.6 integer read-write
Specifies the value of the default packet size for the direction remote-to-local, which may be nonstandard, provided the value is agreed between the communicating parties on the LAN or between the DTE and DCE. Default=defPktSz256(8). Enumeration: 'defPktSz128': 7, 'defPktSz512': 9, 'defPktSz64': 6, 'defPktSz32': 5, 'defPktSz16': 4, 'defPktSz256': 8.
                           ux25AdmnLocMaxWinSize 1.3.6.1.4.1.429.1.10.3.1.7 integer read-write
Specifies the maximum local window size. NOTE: 127 allowed only for modulo 128 networks. Default=7.
                           ux25AdmnRemMaxWinSize 1.3.6.1.4.1.429.1.10.3.1.8 integer read-write
Specifies the maximum remote window size. NOTE: 127 allowed only for modulo 128 networks. Default=7.
                           ux25AdmnLocDefWinSize 1.3.6.1.4.1.429.1.10.3.1.9 integer read-write
Specifies the value of the default window size, which may be nonstandard, provided the value is agreed on by all parties on the LAN between the DTE and DCE. NOTE: The sequence numbering scheme affects the range of this parameter. Default=2.
                           ux25AdmnRemDefWinSize 1.3.6.1.4.1.429.1.10.3.1.10 integer read-write
Specifies the value of the default window size, which may be nonstandard, provided the value is agreed on by all parties on the LAN between the DTE and DCE. NOTE: The sequence numbering scheme affects the range of this parameter. Default=2.
                           ux25AdmnMaxNSDULimit 1.3.6.1.4.1.429.1.10.3.1.11 integer read-write
The default maximum length beyond which concatenation is stopped and data currently held is passed to the Network Service user. Default=256.
                           ux25AdmnAccNoDiagnostic 1.3.6.1.4.1.429.1.10.3.1.12 integer read-write
Allow the omission of the diagnostic byte in incoming RESTART, CLEAR and RESET INDICATION packets. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnUseDiagnosticPacket 1.3.6.1.4.1.429.1.10.3.1.13 integer read-write
Use diagnostic packets. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnItutClearLen 1.3.6.1.4.1.429.1.10.3.1.14 integer read-write
Restrict the length of a CLEAR INDICATION to 5 bytes and a CLEAR CONFIRM to 3 bytes. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnBarDiagnosticPacket 1.3.6.1.4.1.429.1.10.3.1.15 integer read-write
Bar diagnostic packets. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnDiscNzDiagnostic 1.3.6.1.4.1.429.1.10.3.1.16 integer read-write
Discard all diagnostic packets on a non-zero LCN. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnAcceptHexAdd 1.3.6.1.4.1.429.1.10.3.1.17 integer read-write
Allow DTE addresses to contain hexadecimal digits. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnBarNonPrivilegeListen 1.3.6.1.4.1.429.1.10.3.1.18 integer read-write
Disallow a non-privileged user (i.e without superuser privilege) from listening for incoming calls. Default=enable(2). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnIntlAddrRecognition 1.3.6.1.4.1.429.1.10.3.1.19 integer read-write
Determine whether outgoing international calls are to be accepted. The values and their interpretation are: 1 - International calls are not distinguished. 2 - The DNIC of the called DTE address is examined and compared to that held in the psdn_local members dnic1 and dnic2. A mismatch implies an international call. 3 - International calls are distinguished by having a '1' prefix on the DTE address. 4 - International calls are distinguished by having a '0' prefix on the DTE address. Default=notDistinguished(1). Enumeration: 'notDistinguished': 1, 'prefix1': 3, 'prefix0': 4, 'examineDnic': 2.
                           ux25AdmnDnic 1.3.6.1.4.1.429.1.10.3.1.20 displaystring read-write
This field contains the first four digits of DNIC and is only used when ux25AdmnIntlAddrRecognition is set to examineDnic(2). Note this field must contain exactly four BCD digits. Default=0000.
                           ux25AdmnIntlPrioritized 1.3.6.1.4.1.429.1.10.3.1.21 integer read-write
Determine whether some prioritizing method is to used for international calls and is used in conjuction with ux25AdmnPrtyEncodeCtrl and ux25AdmnPrtyPktForced value. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnPrtyEncodeCtrl 1.3.6.1.4.1.429.1.10.3.1.22 integer read-write
Describes how the priority request is to be encoded for this PSDN. Default=x2588(1). Enumeration: 'datapacPriority76': 2, 'datapacTraffic80': 3, 'x2588': 1.
                           ux25AdmnPrtyPktForcedVal 1.3.6.1.4.1.429.1.10.3.1.23 integer read-write
If this entry is other than prioPktSz1(1) all priority call requests and incoming calls should have the associated packet size parameter forced to this value. Note that the actual packet size is 2 to the power of this parameter. Default=prioPktSz1(1). Enumeration: 'prioPktSz10': 11, 'prioPktSz11': 12, 'prioPktSz12': 13, 'prioPktSz8': 9, 'prioPktSz9': 10, 'prioPktSz0': 1, 'prioPktSz6': 7, 'prioPktSz7': 8, 'prioPktSz4': 5, 'prioPktSz5': 6.
                           ux25AdmnSrcAddrCtrl 1.3.6.1.4.1.429.1.10.3.1.24 integer read-write
Provide a means to override or set the calling address in outgoing call requests for this PSDN. Default=noSaCntrl(1). Enumeration: 'noSaCntrl': 1, 'forceLocal': 4, 'useLocal': 3, 'omitDte': 2.
                           ux25AdmnDbitInAccept 1.3.6.1.4.1.429.1.10.3.1.25 integer read-write
Defines the action to take when a Call Accept is received with the D-bit set and there is no local D-bit support. Default=clearCall(3). Enumeration: 'clearCall': 3, 'leaveDbit': 1, 'zeroDbit': 2.
                           ux25AdmnDbitOutAccept 1.3.6.1.4.1.429.1.10.3.1.26 integer read-write
Defines the action to take when the remote user sends a Call Accept with the D-bit set when the local user did not request use of the D-bit. Default=clearCall(3). Enumeration: 'clearCall': 3, 'leaveDbit': 1, 'zeroDbit': 2.
                           ux25AdmnDbitInData 1.3.6.1.4.1.429.1.10.3.1.27 integer read-write
Defines the action to take when a data packet is received with the D-bit set and the local user did not request use of the D-bit. Default=clearCall(3). Enumeration: 'clearCall': 3, 'leaveDbit': 1, 'zeroDbit': 2.
                           ux25AdmnDbitOutData 1.3.6.1.4.1.429.1.10.3.1.28 integer read-write
Defines the action when the local user send a data packet with the D-bit set, but the remote party has not indicated D-bit support. Default=clearCall(3). Enumeration: 'clearCall': 3, 'leaveDbit': 1, 'zeroDbit': 2.
                   ux25AdmnSubscriberTable 1.3.6.1.4.1.429.1.10.4 no-access
Defines objects for the parameters of an X.25 interface which the administrator can read and set.
                       ux25AdmnSubscriberEntry 1.3.6.1.4.1.429.1.10.4.1 no-access
Entries of ux25AdmnSubscriberTable.
                           ux25AdmnSubscriberIndex 1.3.6.1.4.1.429.1.10.4.1.1 integer read-only
A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity entry in the entity table of the chassis MIB.
                           ux25AdmnSubCugIaoa 1.3.6.1.4.1.429.1.10.4.1.2 integer read-write
Specifies if this DTE subscribes to Closed User Groups with Incoming or Outgoing access. Default=enable(2). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnSubCugPref 1.3.6.1.4.1.429.1.10.4.1.3 integer read-write
Specifies if this DTE subscribes to a Preferential Closed User Groups. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnSubCugoa 1.3.6.1.4.1.429.1.10.4.1.4 integer read-write
Specifies if this DTE subscribes to Closed User Groups with Outgoing access. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnSubCugia 1.3.6.1.4.1.429.1.10.4.1.5 integer read-write
Specifies whether or not this DTE subscribes to Closed User Groups with Incoming Access. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnCugFormat 1.3.6.1.4.1.429.1.10.4.1.6 integer read-write
The maximum number of Closed User Groups that this DTE subscribes to. This will be one of two ranges: Basic (100 or fewer) or Extended (between 101 and 10000). Default=basic(1). Enumeration: 'extended': 2, 'basic': 1.
                           ux25AdmnBarInCug 1.3.6.1.4.1.429.1.10.4.1.7 integer read-write
Provides the means to force rejection of any incoming calls carrying the Closed User Group optional facility (which is necessary in some networks, such as DDN. When enabled, such calls will be rejected, otherwise incoming Closed User Group facilities are ignored. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnSubExtended 1.3.6.1.4.1.429.1.10.4.1.8 integer read-write
Subscribe to extended call packets (Window and Packet size negotiation is permitted). Default=enable(2). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnBarExtended 1.3.6.1.4.1.429.1.10.4.1.9 integer read-write
Treat window and packet size negotiation in incoming packets as a procedure error. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnSubFstSelNoRstrct 1.3.6.1.4.1.429.1.10.4.1.10 integer read-write
Subscribe to fast select with no restriction on response. Default=enable(2). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnSubFstSelWthRstrct 1.3.6.1.4.1.429.1.10.4.1.11 integer read-write
Subscribe to fast select with restriction on response. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnAccptRvsChrgng 1.3.6.1.4.1.429.1.10.4.1.12 integer read-write
Allow incoming calls to specify the reverse charging facility. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnSubLocChargePrevent 1.3.6.1.4.1.429.1.10.4.1.13 integer read-write
Subscribe to local charging prevention. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnSubToaNpiFormat 1.3.6.1.4.1.429.1.10.4.1.14 integer read-write
Subscribe to TOA/NPI Address Format. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnBarToaNpiFormat 1.3.6.1.4.1.429.1.10.4.1.15 integer read-write
Bar incoming call set-up and clearing packets which use the TOA/NPI Address Format. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnSubNuiOverride 1.3.6.1.4.1.429.1.10.4.1.16 integer read-write
Subscribe to NUI override. Deafult=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnBarInCall 1.3.6.1.4.1.429.1.10.4.1.17 integer read-write
Bar incoming calls. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                           ux25AdmnBarOutCall 1.3.6.1.4.1.429.1.10.4.1.18 integer read-write
Bar outgoing calls. Default=disable(1). Enumeration: 'enable': 2, 'disable': 1.
                   ux25AdmnTimerTable 1.3.6.1.4.1.429.1.10.5 no-access
Defines objects for the parameters of an X.25 interface which the administrator can read and set.
                       ux25AdmnTimerEntry 1.3.6.1.4.1.429.1.10.5.1 no-access
Entries of ux25AdmnTimerTable.
                           ux25AdmnTimerIndex 1.3.6.1.4.1.429.1.10.5.1.1 integer read-only
A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity entry in the entity table of the chassis MIB.
                           ux25AdmnAckDelay 1.3.6.1.4.1.429.1.10.5.1.2 integer read-write
The maximum number of ticks (0.1 second units) over which a pending acknowledgement is withheld. Default=5.
                           ux25AdmnRstrtTime 1.3.6.1.4.1.429.1.10.5.1.3 integer read-write
The number of ticks (0.1 second units) for the DTE timer parameter T20, the Restart Request Response Timer. Default=1800.
                           ux25AdmnCallTime 1.3.6.1.4.1.429.1.10.5.1.4 integer read-write
The number of ticks (0.1 second units) for the DTE timer parameter T21, the Call Request Response Timer. Default=2000.
                           ux25AdmnRstTime 1.3.6.1.4.1.429.1.10.5.1.5 integer read-write
The number of ticks (0.1 second units) for the DTE timer parameter T22, the Reset Request Response Timer. Default=1800.
                           ux25AdmnClrTime 1.3.6.1.4.1.429.1.10.5.1.6 integer read-write
The number of ticks (0.1 second units) for the DTE timer parameter T23, the Clear Request Response Timer. Default=1800.
                           ux25AdmnWinStatTime 1.3.6.1.4.1.429.1.10.5.1.7 integer read-write
Related, but does not correspond exactly to the DTE Window Status Transmission Timer, T24. Specifies the number of ticks (0.1 second units) for the maximum time that acknowledgments of data received from the remote transmitter will be witheld. At timer expiration, any witheld acknowledgments will be carried by a X.25 level 3 RNR packet. Default=750.
                           ux25AdmnWinRotTime 1.3.6.1.4.1.429.1.10.5.1.8 integer read-write
The number of ticks (0.1 second units) for the DTE timer parameter T25, the Window Rotation Timer. Default=1500.
                           ux25AdmnIntrptTime 1.3.6.1.4.1.429.1.10.5.1.9 integer read-write
The number of ticks (0.1 second units) for the DTE timer parameter T26, the Interrupt Response Timer. Default=1800.
                           ux25AdmnIdleValue 1.3.6.1.4.1.429.1.10.5.1.10 integer read-write
The number of ticks (0.1 second units) during which a link level connection associated with no connections will be maintained. If the link is to a WAN then this value should be zero (infinity). This timer is only used with X.25 on a LAN. Default=0.
                           ux25AdmnConnectValue 1.3.6.1.4.1.429.1.10.5.1.11 integer read-write
Specifies the number of ticks (0.1 second units), over which the DTE/DCE resolution phase be completely implemented in order to prevent the unlikely event that two packet level entities cannot resolve their DTE/DCE nature. When this expires, the link connection will be disconnected and all pending connections aborted. Default=2000.
                           ux25AdmnRstrtCnt 1.3.6.1.4.1.429.1.10.5.1.12 integer read-write
The number of ticks (0.1 second units) for the DTE Restart Request Retransmission Count. Default=1.
                           ux25AdmnRstCnt 1.3.6.1.4.1.429.1.10.5.1.13 integer read-write
The number of ticks (0.1 second units) for the DTE Reset Request Retransmission Count. Default=1.
                           ux25AdmnClrCnt 1.3.6.1.4.1.429.1.10.5.1.14 integer read-write
The number of ticks (0.1 second units) for the DTE Clear Request Retransmission Count. Default=1.
                           ux25AdmnLocalDelay 1.3.6.1.4.1.429.1.10.5.1.15 integer read-write
The transit delay (in 0.1 second units) attributed to internal processing. Default=5.
                           ux25AdmnAccessDelay 1.3.6.1.4.1.429.1.10.5.1.16 integer read-write
The transit delay (in 0.1 second units) attributed to the effect of the line transmission rate. Default=5.
                   ux25OperChannelTable 1.3.6.1.4.1.429.1.10.6 no-access
Defines objects that report the current parameters used by a running interface. These objects are read only.
                       ux25OperChannelEntry 1.3.6.1.4.1.429.1.10.6.1 no-access
Entries of ux25OperChannelTable.
                           ux25OperChannelIndex 1.3.6.1.4.1.429.1.10.6.1.1 integer read-only
                           ux25OperNetMode 1.3.6.1.4.1.429.1.10.6.1.2 integer read-only
Enumeration: 'datexP': 12, 'x2580': 4, 'x2588': 2, 'x2584': 3, 'austpac': 6, 'ddxP': 13, 'ddn': 8, 'datanet': 18, 'datapak': 17, 'datapac': 7, 'fDatapac': 21, 'accunet': 15, 'transpac': 10, 'pss': 5, 'dcs': 19, 'tymnet': 11, 'telepac': 20, 'venusP': 14, 'telenet': 9, 'pacnet': 23, 'itapac': 16, 'luxpac': 24, 'x25Llc': 1, 'finpac': 22.
                           ux25OperProtocolVersion 1.3.6.1.4.1.429.1.10.6.1.3 integer read-only
Enumeration: 'x25ver80': 1, 'x25ver88': 3, 'x25ver84': 2.
                           ux25OperInterfaceMode 1.3.6.1.4.1.429.1.10.6.1.4 integer read-only
Enumeration: 'dxeMode': 3, 'dceMode': 1, 'dteMode': 2.
                           ux25OperLowestPVCVal 1.3.6.1.4.1.429.1.10.6.1.5 integer read-only
                           ux25OperHighestPVCVal 1.3.6.1.4.1.429.1.10.6.1.6 integer read-only
                           ux25OperChannelLIC 1.3.6.1.4.1.429.1.10.6.1.7 integer read-only
                           ux25OperChannelHIC 1.3.6.1.4.1.429.1.10.6.1.8 integer read-only
                           ux25OperChannelLTC 1.3.6.1.4.1.429.1.10.6.1.9 integer read-only
                           ux25OperChannelHTC 1.3.6.1.4.1.429.1.10.6.1.10 integer read-only
                           ux25OperChannelLOC 1.3.6.1.4.1.429.1.10.6.1.11 integer read-only
                           ux25OperChannelHOC 1.3.6.1.4.1.429.1.10.6.1.12 integer read-only
                   ux25OperClassTable 1.3.6.1.4.1.429.1.10.7 no-access
Defines objects that report the current parameters used by a running interface. These objects are read only.
                       ux25OperClassEntry 1.3.6.1.4.1.429.1.10.7.1 no-access
Entries of ux25OperTable.
                           ux25OperClassIndex 1.3.6.1.4.1.429.1.10.7.1.1 integer read-only
                           ux25OperLocMaxThruPutClass 1.3.6.1.4.1.429.1.10.7.1.2 integer read-only
Enumeration: 'tc1200': 8, 'tc600': 7, 'tc150': 5, 'tc2400': 9, 'tc9600': 11, 'tc19200': 12, 'tcReserved2': 3, 'tcReserved0': 1, 'tc75': 4, 'tc48000': 13, 'tcReserved13': 14, 'tcReserved14': 15, 'tcReserved15': 16, 'tc300': 6, 'tc4800': 10, 'tcReserved1': 2.
                           ux25OperRemMaxThruPutClass 1.3.6.1.4.1.429.1.10.7.1.3 integer read-only
Enumeration: 'tc1200': 8, 'tc600': 7, 'tc150': 5, 'tc2400': 9, 'tc9600': 11, 'tc19200': 12, 'tcReserved2': 3, 'tcReserved0': 1, 'tc75': 4, 'tc48000': 13, 'tcReserved13': 14, 'tcReserved14': 15, 'tcReserved15': 16, 'tc300': 6, 'tc4800': 10, 'tcReserved1': 2.
                           ux25OperLocDefThruPutClass 1.3.6.1.4.1.429.1.10.7.1.4 integer read-only
Enumeration: 'tc1200': 8, 'tc600': 7, 'tc150': 5, 'tc2400': 9, 'tc9600': 11, 'tc19200': 12, 'tcReserved2': 3, 'tcReserved0': 1, 'tc75': 4, 'tc48000': 13, 'tcReserved13': 14, 'tcReserved14': 15, 'tcReserved15': 16, 'tc300': 6, 'tc4800': 10, 'tcReserved1': 2.
                           ux25OperRemDefThruPutClass 1.3.6.1.4.1.429.1.10.7.1.5 integer read-only
Enumeration: 'tc1200': 8, 'tc600': 7, 'tc150': 5, 'tc2400': 9, 'tc9600': 11, 'tc19200': 12, 'tcReserved2': 3, 'tcReserved0': 1, 'tc75': 4, 'tc48000': 13, 'tcReserved13': 14, 'tcReserved14': 15, 'tcReserved15': 16, 'tc300': 6, 'tc4800': 10, 'tcReserved1': 2.
                           ux25OperLocMinThruPutClass 1.3.6.1.4.1.429.1.10.7.1.6 integer read-only
Enumeration: 'tc1200': 8, 'tc600': 7, 'tc150': 5, 'tc2400': 9, 'tc9600': 11, 'tc19200': 12, 'tcReserved2': 3, 'tcReserved0': 1, 'tc75': 4, 'tc48000': 13, 'tcReserved13': 14, 'tcReserved14': 15, 'tcReserved15': 16, 'tc300': 6, 'tc4800': 10, 'tcReserved1': 2.
                           ux25OperRemMinThruPutClass 1.3.6.1.4.1.429.1.10.7.1.7 integer read-only
Enumeration: 'tc1200': 8, 'tc600': 7, 'tc150': 5, 'tc2400': 9, 'tc9600': 11, 'tc19200': 12, 'tcReserved2': 3, 'tcReserved0': 1, 'tc75': 4, 'tc48000': 13, 'tcReserved13': 14, 'tcReserved14': 15, 'tcReserved15': 16, 'tc300': 6, 'tc4800': 10, 'tcReserved1': 2.
                           ux25OperThclassNegToDef 1.3.6.1.4.1.429.1.10.7.1.8 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperThclassType 1.3.6.1.4.1.429.1.10.7.1.9 integer read-only
Enumeration: 'loNibble': 2, 'noTcType': 1, 'highNibble': 3, 'bothNibbles': 4.
                           ux25OperThclassWinMap 1.3.6.1.4.1.429.1.10.7.1.10 displaystring read-only
                           ux25OperThclassPackMap 1.3.6.1.4.1.429.1.10.7.1.11 displaystring read-only
                   ux25OperPacketTable 1.3.6.1.4.1.429.1.10.8 no-access
Defines objects that report the current parameters used by a running interface. These objects are read only.
                       ux25OperPacketEntry 1.3.6.1.4.1.429.1.10.8.1 no-access
Entries of ux25OperPacketTable.
                           ux25OperPacketIndex 1.3.6.1.4.1.429.1.10.8.1.1 integer read-only
                           ux25OperPktSequencing 1.3.6.1.4.1.429.1.10.8.1.2 integer read-only
Enumeration: 'pktSeq8': 16, 'pktSeq128': 32.
                           ux25OperLocMaxPktSize 1.3.6.1.4.1.429.1.10.8.1.3 integer read-only
Enumeration: 'maxPktSz128': 7, 'maxPktSz512': 9, 'maxPktSz256': 8.
                           ux25OperRemMaxPktSize 1.3.6.1.4.1.429.1.10.8.1.4 integer read-only
Enumeration: 'maxPktSz128': 7, 'maxPktSz512': 9, 'maxPktSz256': 8.
                           ux25OperLocDefPktSize 1.3.6.1.4.1.429.1.10.8.1.5 integer read-only
Enumeration: 'defPktSz128': 7, 'defPktSz512': 9, 'defPktSz64': 6, 'defPktSz32': 5, 'defPktSz16': 4, 'defPktSz256': 8.
                           ux25OperRemDefPktSize 1.3.6.1.4.1.429.1.10.8.1.6 integer read-only
Enumeration: 'defPktSz128': 7, 'defPktSz512': 9, 'defPktSz64': 6, 'defPktSz32': 5, 'defPktSz16': 4, 'defPktSz256': 8.
                           ux25OperLocMaxWinSize 1.3.6.1.4.1.429.1.10.8.1.7 integer read-only
                           ux25OperRemMaxWinSize 1.3.6.1.4.1.429.1.10.8.1.8 integer read-only
                           ux25OperLocDefWinSize 1.3.6.1.4.1.429.1.10.8.1.9 integer read-only
                           ux25OperRemDefWinSize 1.3.6.1.4.1.429.1.10.8.1.10 integer read-only
                           ux25OperMaxNSDULimit 1.3.6.1.4.1.429.1.10.8.1.11 integer read-only
                           ux25OperAccNoDiagnostic 1.3.6.1.4.1.429.1.10.8.1.12 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperUseDiagnosticPacket 1.3.6.1.4.1.429.1.10.8.1.13 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperItutClearLen 1.3.6.1.4.1.429.1.10.8.1.14 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperBarDiagnosticPacket 1.3.6.1.4.1.429.1.10.8.1.15 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperDiscNzDiagnostic 1.3.6.1.4.1.429.1.10.8.1.16 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperAcceptHexAdd 1.3.6.1.4.1.429.1.10.8.1.17 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperBarNonPrivilegeListen 1.3.6.1.4.1.429.1.10.8.1.18 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperIntlAddrRecognition 1.3.6.1.4.1.429.1.10.8.1.19 integer read-only
Enumeration: 'notDistinguished': 1, 'prefix1': 3, 'prefix0': 4, 'examineDnic': 2.
                           ux25OperDnic 1.3.6.1.4.1.429.1.10.8.1.20 displaystring read-only
                           ux25OperIntlPrioritized 1.3.6.1.4.1.429.1.10.8.1.21 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperPrtyEncodeCtrl 1.3.6.1.4.1.429.1.10.8.1.22 integer read-only
Enumeration: 'datapacPriority76': 2, 'datapacTraffic80': 3, 'x2588': 1.
                           ux25OperPrtyPktForcedVal 1.3.6.1.4.1.429.1.10.8.1.23 integer read-only
Enumeration: 'prioPktSz10': 11, 'prioPktSz11': 12, 'prioPktSz12': 13, 'prioPktSz8': 9, 'prioPktSz9': 10, 'prioPktSz0': 1, 'prioPktSz6': 7, 'prioPktSz7': 8, 'prioPktSz4': 5, 'prioPktSz5': 6.
                           ux25OperSrcAddrCtrl 1.3.6.1.4.1.429.1.10.8.1.24 integer read-only
Enumeration: 'noSaCntrl': 1, 'forceLocal': 4, 'useLocal': 3, 'omitDte': 2.
                           ux25OperDbitInAccept 1.3.6.1.4.1.429.1.10.8.1.25 integer read-only
Enumeration: 'clearCall': 3, 'leaveDbit': 1, 'zeroDbit': 2.
                           ux25OperDbitOutAccept 1.3.6.1.4.1.429.1.10.8.1.26 integer read-only
Enumeration: 'clearCall': 3, 'leaveDbit': 1, 'zeroDbit': 2.
                           ux25OperDbitInData 1.3.6.1.4.1.429.1.10.8.1.27 integer read-only
Enumeration: 'clearCall': 3, 'leaveDbit': 1, 'zeroDbit': 2.
                           ux25OperDbitOutData 1.3.6.1.4.1.429.1.10.8.1.28 integer read-only
Enumeration: 'clearCall': 3, 'leaveDbit': 1, 'zeroDbit': 2.
                   ux25OperSubscriberTable 1.3.6.1.4.1.429.1.10.9 no-access
Defines objects that report the current parameters used by a running interface. These objects are read only.
                       ux25OperSubscriberEntry 1.3.6.1.4.1.429.1.10.9.1 no-access
Entries of ux25OperSubscriberTable.
                           ux25OperSubscriberIndex 1.3.6.1.4.1.429.1.10.9.1.1 integer read-only
                           ux25OperSubCugIaoa 1.3.6.1.4.1.429.1.10.9.1.2 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperSubCugPref 1.3.6.1.4.1.429.1.10.9.1.3 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperSubCugoa 1.3.6.1.4.1.429.1.10.9.1.4 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperSubCugia 1.3.6.1.4.1.429.1.10.9.1.5 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperCugFormat 1.3.6.1.4.1.429.1.10.9.1.6 integer read-only
Enumeration: 'extended': 2, 'basic': 1.
                           ux25OperBarInCug 1.3.6.1.4.1.429.1.10.9.1.7 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperSubExtended 1.3.6.1.4.1.429.1.10.9.1.8 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperBarExtended 1.3.6.1.4.1.429.1.10.9.1.9 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperSubFstSelNoRstrct 1.3.6.1.4.1.429.1.10.9.1.10 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperSubFstSelWthRstrct 1.3.6.1.4.1.429.1.10.9.1.11 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperAccptRvsChrgng 1.3.6.1.4.1.429.1.10.9.1.12 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperSubLocChargePrevent 1.3.6.1.4.1.429.1.10.9.1.13 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperSubToaNpiFormat 1.3.6.1.4.1.429.1.10.9.1.14 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperBarToaNpiFormat 1.3.6.1.4.1.429.1.10.9.1.15 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperSubNuiOverride 1.3.6.1.4.1.429.1.10.9.1.16 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperBarInCall 1.3.6.1.4.1.429.1.10.9.1.17 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                           ux25OperBarOutCall 1.3.6.1.4.1.429.1.10.9.1.18 integer read-only
Enumeration: 'enable': 2, 'disable': 1.
                   ux25OperTimerTable 1.3.6.1.4.1.429.1.10.10 no-access
Defines objects that report the current parameters used by a running interface. These objects are read only.
                         ux25OperTimerEntry 1.3.6.1.4.1.429.1.10.10.1 no-access
Entries of ux25OperTimerTable.
                             ux25OperTimerIndex 1.3.6.1.4.1.429.1.10.10.1.1 integer read-only
                             ux25OperAckDelay 1.3.6.1.4.1.429.1.10.10.1.2 integer read-only
                             ux25OperRstrtTime 1.3.6.1.4.1.429.1.10.10.1.3 integer read-only
                             ux25OperCallTime 1.3.6.1.4.1.429.1.10.10.1.4 integer read-only
                             ux25OperRstTime 1.3.6.1.4.1.429.1.10.10.1.5 integer read-only
                             ux25OperClrTime 1.3.6.1.4.1.429.1.10.10.1.6 integer read-only
                             ux25OperWinStatTime 1.3.6.1.4.1.429.1.10.10.1.7 integer read-only
                             ux25OperWinRotTime 1.3.6.1.4.1.429.1.10.10.1.8 integer read-only
                             ux25OperIntrptTime 1.3.6.1.4.1.429.1.10.10.1.9 integer read-only
                             ux25OperIdleValue 1.3.6.1.4.1.429.1.10.10.1.10 integer read-only
                             ux25OperConnectValue 1.3.6.1.4.1.429.1.10.10.1.11 integer read-only
                             ux25OperRstrtCnt 1.3.6.1.4.1.429.1.10.10.1.12 integer read-only
                             ux25OperRstCnt 1.3.6.1.4.1.429.1.10.10.1.13 integer read-only
                             ux25OperClrCnt 1.3.6.1.4.1.429.1.10.10.1.14 integer read-only
                             ux25OperLocalDelay 1.3.6.1.4.1.429.1.10.10.1.15 integer read-only
                             ux25OperAccessDelay 1.3.6.1.4.1.429.1.10.10.1.16 integer read-only
                   ux25StatTable 1.3.6.1.4.1.429.1.10.11 no-access
Defines objects that report operational statistics for an X.25 interface.
                         ux25StatEntry 1.3.6.1.4.1.429.1.10.11.1 no-access
Entries of ux25StatTable.
                             ux25StatIndex 1.3.6.1.4.1.429.1.10.11.1.1 integer read-only
A unique value for each X.25 subnetwork entity in the chassis. The value of this object matches the value of the index of the corresponding X.25 subnetwork entity entry in the entity table of the chassis MIB.
                             ux25StatCallsRcvd 1.3.6.1.4.1.429.1.10.11.1.2 integer read-only
Number of incoming calls.
                             ux25StatCallsSent 1.3.6.1.4.1.429.1.10.11.1.3 integer read-only
Number of outgoing calls.
                             ux25StatCallsRcvdEstab 1.3.6.1.4.1.429.1.10.11.1.4 integer read-only
Number of incoming calls established.
                             ux25StatCallsSentEstab 1.3.6.1.4.1.429.1.10.11.1.5 integer read-only
Number of outgoing calls established.
                             ux25StatDataPktsRcvd 1.3.6.1.4.1.429.1.10.11.1.6 integer read-only
Number of data packets received.
                             ux25StatDataPktsSent 1.3.6.1.4.1.429.1.10.11.1.7 integer read-only
Number of data packets sent.
                             ux25StatRestartsRcvd 1.3.6.1.4.1.429.1.10.11.1.8 integer read-only
Number of restarts received.
                             ux25StatRestartsSent 1.3.6.1.4.1.429.1.10.11.1.9 integer read-only
Number of restarts sent.
                             ux25StatRcvrNotRdyRcvd 1.3.6.1.4.1.429.1.10.11.1.10 integer read-only
Number of receiver not ready received.
                             ux25StatRcvrNotRdySent 1.3.6.1.4.1.429.1.10.11.1.11 integer read-only
Number of receiver not ready sent.
                             ux25StatRcvrRdyRcvd 1.3.6.1.4.1.429.1.10.11.1.12 integer read-only
Number of receiver ready received.
                             ux25StatRcvrRdySent 1.3.6.1.4.1.429.1.10.11.1.13 integer read-only
Number of receiver ready sent.
                             ux25StatResetsRcvd 1.3.6.1.4.1.429.1.10.11.1.14 integer read-only
Number of resets received.
                             ux25StatResetsSent 1.3.6.1.4.1.429.1.10.11.1.15 integer read-only
Number of resets sent.
                             ux25StatDiagPktsRcvd 1.3.6.1.4.1.429.1.10.11.1.16 integer read-only
Number of diagnostic packets received.
                             ux25StatDiagPktsSent 1.3.6.1.4.1.429.1.10.11.1.17 integer read-only
Number of diagnostic packets sent.
                             ux25StatIntrptPktsRcvd 1.3.6.1.4.1.429.1.10.11.1.18 integer read-only
Number of interrupt packets received.
                             ux25StatIntrptPktsSent 1.3.6.1.4.1.429.1.10.11.1.19 integer read-only
Number of interrupt packets sent.
                             ux25StatPVCsInDatTrnsfrState 1.3.6.1.4.1.429.1.10.11.1.20 integer read-only
Number of PVCs in Data Transfer State.
                             ux25StatSVCsInDatTrnsfrState 1.3.6.1.4.1.429.1.10.11.1.21 integer read-only
Number of SVCs in Data Transfer State.