TSMEXT-MIB: View SNMP OID List / Download MIB

VENDOR: XYLAN CORP.


 Home MIB: TSMEXT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, XYLAN-BASE-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tsmExtensions 1.3.6.1.4.1.800.2.19.1
     tsmAdmin 1.3.6.1.4.1.800.2.19.1.1
         tsmAdminPortTable 1.3.6.1.4.1.800.2.19.1.1.1 no-access
TSM Port Configuration Table.
             tsmAdminPortEntry 1.3.6.1.4.1.800.2.19.1.1.1.1 no-access
A TSM Port Configuration Entry.
                 tsmAdminPortSlotNumber 1.3.6.1.4.1.800.2.19.1.1.1.1.1 integer read-only
The slot number of the Token Ring Switching Module.
                 tsmAdminPortNumber 1.3.6.1.4.1.800.2.19.1.1.1.1.2 integer read-only
The port number of the Token Ring Switching Module.
                 tsmAdminPortState 1.3.6.1.4.1.800.2.19.1.1.1.1.3 integer read-write
The configured state of the port. 1 = enable. 2 = disable. Enumeration: 'enable': 1, 'disable': 2.
                 tsmAdminPortActiveMon 1.3.6.1.4.1.800.2.19.1.1.1.1.4 integer read-write
The configured active monitor participation of the port. 1 = yes. Participate in the active monitor selection process. 2 = no. Do NOT participate in the active monitor selection process. Enumeration: 'yes': 1, 'no': 2.
                 tsmAdminPortAcBitSet 1.3.6.1.4.1.800.2.19.1.1.1.1.5 integer read-write
The configured control mode for handling the ARI/FCI Bits of the port. 1 = nonLocal. Set ARI/FCI bits on all non-local LLC frames repeated by the port. For local frames repeat the ARI/FCI bits just as they are received. 2 = repeat. Repeat ARI/FCI bit on all LLC frames just as they are received. 3 = always. Set ARI/FCI bits on all LLC frames repeated by the port. 4 = never. Do not set ARI/FCI bits on any LLC frames repeated by the port. Enumeration: 'always': 3, 'repeat': 2, 'nonLocal': 1, 'never': 4.
                 tsmAdminPortConfigType 1.3.6.1.4.1.800.2.19.1.1.1.1.6 integer read-write
The configured config-type of the port. 1 = auto. Automatically set the port's ring speed, mode, duplex and switching mode parameters. 2 = fixed. Use customer defined values for the port's ring speed, mode, duplex and switching mode parameters. Enumeration: 'auto': 1, 'fixed': 2.
                 tsmAdminPortRingSpeed 1.3.6.1.4.1.800.2.19.1.1.1.1.7 integer read-write
The configured ring speed of the port. 1 = auto. Automatically set the port's ring speed. 2 = fourMegabit. Always set the port's ring speed at four megabits. 3 = sixteenMegabit. Always set the port's ring speed at sixteen megabits. This object may ONLY be set if the value of port's tsmAdminPortConfigType is fixed(1). Enumeration: 'auto': 1, 'fourMegabit': 2, 'sixteenMegabit': 3.
                 tsmAdminPortPortMode 1.3.6.1.4.1.800.2.19.1.1.1.1.8 integer read-write
The configured port mode of the port. 1 = auto. Automatically sense the port mode. This value is set by the switch when the tsmAdminPortConfigMode is set to auto. This object CANNOT be changed to auto by an SNMP SET. 2 = portMode. Only a dedicated connection to a station is supported. 3 = adapterMode. The port operates like a station. The connection can be either dedicated or shared. This object may ONLY be set if the value of port's tsmAdminPortConfigType is fixed(1). auto(1) is NOT a valid SET value. Enumeration: 'auto': 1, 'adapterMode': 3, 'portMode': 2.
                 tsmAdminPortDuplex 1.3.6.1.4.1.800.2.19.1.1.1.1.9 integer read-write
The configured duplex mode of the port. 1 = auto. Automatically set the port's duplex mode. 2 = halfDuplex. Alway run the port in half duplex mode. 3 = fullDuplex. Alway run the port in full duplex mode. This object may ONLY be set if the value of port's tsmAdminPortConfigType is fixed(1). Enumeration: 'auto': 1, 'fullDuplex': 3, 'halfDuplex': 2.
                 tsmAdminPortSwMode 1.3.6.1.4.1.800.2.19.1.1.1.1.10 integer read-write
The configured duplex mode of the port. 1 = cutThrough. A scheme that allows frame transmission to begin at the output port prior to end-of-frame reception at the input port. 2 = storeAndForward. The entire packet is received and stored before switching begins. 3 = adaptive. Alternate between cut-through and store-and-forward base on the specified error threshold. Enumeration: 'cutThrough': 1, 'storeAndForward': 2, 'adaptive': 3.
                 tsmAdminPortReset 1.3.6.1.4.1.800.2.19.1.1.1.1.11 integer read-write
This object is used to reset the port. 1 = ready. The port is ready to be reset. 2 = reset. Reset the port. Enumeration: 'ready': 1, 'reset': 2.
         tsmAdminSwModeTable 1.3.6.1.4.1.800.2.19.1.1.2 no-access
TSM Switching Mode Configuration Table.
             tsmAdminSwModeEntry 1.3.6.1.4.1.800.2.19.1.1.2.1 no-access
A TSM Switching Mode Configuration Entry.
                 tsmAdminSwModeSlotNumber 1.3.6.1.4.1.800.2.19.1.1.2.1.1 integer read-only
The slot number of the Token Ring Switching Module.
                 tsmAdminSwModeHiErrThresh 1.3.6.1.4.1.800.2.19.1.1.2.1.2 integer read-write
The high error threshold in percent for all ports associated with the TSM which are configured to run in adaptive mode. If the percentage of errors in a sampling period meets or exceeds this value, the port's switching mode will change from cut-through to store-and-forward mode.
                 tsmAdminSwModeLoErrThresh 1.3.6.1.4.1.800.2.19.1.1.2.1.3 integer read-write
The low error threshold in percent for all ports associated with the TSM which are configured to run in adaptive mode. If the percentage of errors in a sampling period falls below this value, the port's switching mode will change from store-and-forward to cut-through mode.
                 tsmAdminSwModeTrendThresh 1.3.6.1.4.1.800.2.19.1.1.2.1.4 integer read-write
The error rate trend threshold in percent for all ports associated with the TSM which are configured to run in adaptive mode. When the percentage of errors is between the high and low error thresholds AND the port is currently running in cut-through mode, the error rate trend which is the difference in errors between two sampling periods is compared to the error rate trend threshold. If the error rate trend is greater than this value, the port's switching mode will change from cut-through mode to store-and-forward. The error rate trend threshold should be no greater than the difference between the high and low threshold values.
                 tsmAdminSwModeSamplePeriod 1.3.6.1.4.1.800.2.19.1.1.2.1.5 integer read-write
The sampling period in seconds for all ports associated with the TSM which are configured to run in adaptive mode.
                 tsmAdminSwModeReset 1.3.6.1.4.1.800.2.19.1.1.2.1.6 integer read-write
This object is used to reset the TSM. 1 = ready. The TSM is ready to be reset. 2 = reset. Reset the TSM. Enumeration: 'ready': 1, 'reset': 2.
     tsmOper 1.3.6.1.4.1.800.2.19.1.2
         tsmOperPortTable 1.3.6.1.4.1.800.2.19.1.2.1 no-access
TSM Port Operational Table.
             tsmOperPortEntry 1.3.6.1.4.1.800.2.19.1.2.1.1 no-access
A TSM Port Operational Entry.
                 tsmOperPortSlotNumber 1.3.6.1.4.1.800.2.19.1.2.1.1.1 integer read-only
The slot number of the Token Ring Switching Module.
                 tsmOperPortNumber 1.3.6.1.4.1.800.2.19.1.2.1.1.2 integer read-only
The port number of the Token Ring Switching Module.
                 tsmOperPortState 1.3.6.1.4.1.800.2.19.1.2.1.1.3 integer read-only
The operational state of the port. 1 = enable. 2 = disable. Enumeration: 'enable': 1, 'disable': 2.
                 tsmOperPortActiveMon 1.3.6.1.4.1.800.2.19.1.2.1.1.4 integer read-only
The operational active monitor participation of the port. 1 = yes. Participate in the active monitor selection process. 2 = no. Do NOT participate in the active monitor selection process. Enumeration: 'yes': 1, 'no': 2.
                 tsmOperPortAcBitSet 1.3.6.1.4.1.800.2.19.1.2.1.1.5 integer read-only
The operational control mode for handling the ARI/FCI Bits of the port. 1 = nonLocal. Set ARI/FCI bits on all non-local LLC frames repeated by the port. For local frames repeat the ARI/FCI bits just as they are received. 2 = repeat. Repeat ARI/FCI bit on all LLC frames just as they are received. 3 = always. Set ARI/FCI bits on all LLC frames repeated by the port. 4 = never. Do not set ARI/FCI bits on any LLC frames repeated by the port. Enumeration: 'always': 3, 'repeat': 2, 'nonLocal': 1, 'never': 4.
                 tsmOperPortConfigType 1.3.6.1.4.1.800.2.19.1.2.1.1.6 integer read-only
The operational config-type of the port. 1 = auto. Automatically set the port's ring speed, mode and duplex parameters. 2 = fixed. Use customer defined values for the port's ring speed, mode and duplex parameters. Enumeration: 'auto': 1, 'fixed': 2.
                 tsmOperPortRingSpeed 1.3.6.1.4.1.800.2.19.1.2.1.1.7 integer read-only
The operational ring speed of the port. 1 = auto. The port has not yet automatically set the ring speed. 2 = fourMegabit. 3 = sixteenMegabit. Enumeration: 'auto': 1, 'fourMegabit': 2, 'sixteenMegabit': 3.
                 tsmOperPortPortMode 1.3.6.1.4.1.800.2.19.1.2.1.1.8 integer read-only
The operational port mode of the port. 1 = auto. Automatically sense the port mode. 2 = portMode. Only a dedicated connection to a station is supported. 3 = adapterMode. The port operates like a station. The connection can be either dedicated or shared. Enumeration: 'auto': 1, 'adapterMode': 3, 'portMode': 2.
                 tsmOperPortDuplex 1.3.6.1.4.1.800.2.19.1.2.1.1.9 integer read-only
The configured duplex mode of the port. 1 = auto. The port has not yet automatically set the port's duplex mode. 2 = halfDuplex. 3 = fullDuplex. Enumeration: 'auto': 1, 'fullDuplex': 3, 'halfDuplex': 2.
                 tsmOperPortSwMode 1.3.6.1.4.1.800.2.19.1.2.1.1.10 integer read-only
The configured switch mode of the port. 1 = cutThrough. A scheme that allows frame transmission to begin at the output port prior to end-of-frame reception at the input port. 2 = storeAndForward. The entire packet is received and stored before switching begins. 3 = adaptive. Alternate between cut-through and store-and-forward base on the specified error threshold. Enumeration: 'cutThrough': 1, 'storeAndForward': 2, 'adaptive': 3.
                 tsmOperPortAdaptSwMode 1.3.6.1.4.1.800.2.19.1.2.1.1.11 integer read-only
The operational adaptive switch mode of the port. 1 = cutThrough. A scheme that allows frame transmission to begin at the output port prior to end-of-frame reception at the input port. 2 = storeAndForward. The entire packet is received and stored before switching begins. 3 = notAdaptive. The port is not running in adaptive mode. Enumeration: 'cutThrough': 1, 'storeAndForward': 2, 'notAdaptive': 3.
                 tsmOperPortAdaptErrRate 1.3.6.1.4.1.800.2.19.1.2.1.1.12 integer read-only
The operational adaptive error rate in percent of the port. This value is the percent of errors in the last sampling period.
                 tsmOperPortAdaptTrend 1.3.6.1.4.1.800.2.19.1.2.1.1.13 integer read-only
The operational adaptive error rate trend in percent of the port. This value is the difference in errors between the last two sampling periods.
                 tsmOperPortOpenState 1.3.6.1.4.1.800.2.19.1.2.1.1.14 integer read-only
The operational open status of the port. 1 = opened 2 = closed 3 = opening 4 = closing 5 = openFailure 6 = ringFailure Enumeration: 'ringFailure': 6, 'opened': 1, 'opening': 3, 'openFailure': 5, 'closed': 2, 'closing': 4.
                 tsmOperPortUpStream 1.3.6.1.4.1.800.2.19.1.2.1.1.15 macaddress read-only
The operational MAC Address of the up stream neighbour in the ring.
         tsmOperSwModeTable 1.3.6.1.4.1.800.2.19.1.2.2 no-access
TSM Switch Mode Operational Table.
             tsmOperSwModeEntry 1.3.6.1.4.1.800.2.19.1.2.2.1 no-access
A TSM Port Operational Entry.
                 tsmOperSwModeSlotNumber 1.3.6.1.4.1.800.2.19.1.2.2.1.1 integer read-only
The slot number of the Token Ring Switching Module.
                 tsmOperSwModeHiErrThresh 1.3.6.1.4.1.800.2.19.1.2.2.1.2 integer read-only
The operational high error threshold for all ports associated with the TSM which are configured to run in adaptive mode. If the percentage of errors in a sampling period meets or exceeds this value, the port's switching mode will change from cut-through to store-and-forward mode.
                 tsmOperSwModeLoErrThresh 1.3.6.1.4.1.800.2.19.1.2.2.1.3 integer read-only
The operational low error threshold for all ports associated with the TSM which are configured to run in adaptive mode. If the percentage of errors in a sampling period falls below this value, the port's switching mode will change from store-and-forward to cut-through mode.
                 tsmOperSwModeTrendThresh 1.3.6.1.4.1.800.2.19.1.2.2.1.4 integer read-only
The operational error rate trend threshold in percent for all ports associated with the TSM which are configured to run in adaptive mode. When the percentage of errors is between the high and low error thresholds AND the port is currently running in cut-through mode, the error rate trend which is the difference in errors between two sampling periods is compared to the error rate trend threshold. If the error rate trend is greater than this value, the port's switching mode will change from cut-through mode to store-and-forward.
                 tsmOperSwModeSamplePeriod 1.3.6.1.4.1.800.2.19.1.2.2.1.5 integer read-only
The operational sampling period in seconds for all ports associated with the TSM which are configured to run in adaptive mode.