TRAPEZE-NETWORKS-CLIENT-SESSION-MIB: View SNMP OID List / Download MIB

VENDOR: TRAPEZE NETWORKS, INC


 Home MIB: TRAPEZE-NETWORKS-CLIENT-SESSION-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, TRAPEZE-NETWORKS-AP-TC, INET-ADDRESS-MIB, TRAPEZE-NETWORKS-BASIC-TC, TRAPEZE-NETWORKS-ROOT-MIB, TRAPEZE-NETWORKS-CLIENT-SESSION-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 trpzClientSessionMib 1.3.6.1.4.1.14525.4.4
Client Session MIB. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2005-2012 Trapeze Networks, Inc. All rights reserved. This Trapeze Networks SNMP Management Information Base Specification (Specification) embodies Trapeze Networks' confidential and proprietary intellectual property. Trapeze Networks retains all title and ownership in the Specification, including any revisions. This Specification is supplied 'AS IS' and Trapeze Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
     trpzClientSessionObjects 1.3.6.1.4.1.14525.4.4.1
         trpzClientSessionDataObjects 1.3.6.1.4.1.14525.4.4.1.1
             trpzClSessClientSessionTable 1.3.6.1.4.1.14525.4.4.1.1.1 no-access
Client Session Table.
                 trpzClSessClientSessionEntry 1.3.6.1.4.1.14525.4.4.1.1.1.1 no-access
Information about a particular client session.
                     trpzClSessClientSessMacAddress 1.3.6.1.4.1.14525.4.4.1.1.1.1.1 macaddress no-access
Client MAC address.
                     trpzClSessClientSessSessionId 1.3.6.1.4.1.14525.4.4.1.1.1.1.2 displaystring read-only
Session ID is a string long enough to be sure we can make it unique over a long time.
                     trpzClSessClientSessUsername 1.3.6.1.4.1.14525.4.4.1.1.1.1.3 displaystring read-only
Client user name.
                     trpzClSessClientSessIpAddress 1.3.6.1.4.1.14525.4.4.1.1.1.1.4 ipaddress read-only
Client IP address. If the client has no IP address, the value will be 0.0.0.0.
                     trpzClSessClientSessEncryptionType 1.3.6.1.4.1.14525.4.4.1.1.1.1.5 trpzencryptiontype read-only
Encryption type.
                     trpzClSessClientSessVlan 1.3.6.1.4.1.14525.4.4.1.1.1.1.6 displaystring read-only
The name of the client VLAN.
                     trpzClSessClientSessApSerialNum 1.3.6.1.4.1.14525.4.4.1.1.1.1.7 trpzapserialnum read-only
Serial Number of the AP this client is connected to. It is a zero length string when wired access is used.
                     trpzClSessClientSessRadioNum 1.3.6.1.4.1.14525.4.4.1.1.1.1.8 trpzradionum read-only
Number of the Radio that provides service to this client. It is 'not-applicable' when wired access is used.
                     trpzClSessClientSessAccessType 1.3.6.1.4.1.14525.4.4.1.1.1.1.9 trpzaccesstype read-only
Access type this client uses (via AP, DAP or wired). Obsoleted by trpzClSessClientSessAccessMode.
                     trpzClSessClientSessAuthMethod 1.3.6.1.4.1.14525.4.4.1.1.1.1.10 trpzauthmethod read-only
Authentication Method. Obsolete, use trpzClSessClientSessDot1xAuthMethod instead.
                     trpzClSessClientSessAuthServer 1.3.6.1.4.1.14525.4.4.1.1.1.1.11 ipaddress read-only
Authentication Server's IP Address. If the client is authenticated via the local DB, or not authenticated, its value will be the system IP.
                     trpzClSessClientSessPortOrNum 1.3.6.1.4.1.14525.4.4.1.1.1.1.12 unsigned32 read-only
Port number. Obsoleted by trpzClSessClientSessApNum.
                     trpzClSessClientSessVlanTag 1.3.6.1.4.1.14525.4.4.1.1.1.1.13 unsigned32 read-only
VLAN tag.
                     trpzClSessClientSessTimeStamp 1.3.6.1.4.1.14525.4.4.1.1.1.1.14 timestamp read-only
Session start time stamp.
                     trpzClSessClientSessSsid 1.3.6.1.4.1.14525.4.4.1.1.1.1.15 displaystring read-only
SSID.
                     trpzClSessClientSessState 1.3.6.1.4.1.14525.4.4.1.1.1.1.16 trpzsessstate read-only
Session state. Deprecated, use trpzClSessClientSessSessionState instead.
                     trpzClSessClientSessLoginType 1.3.6.1.4.1.14525.4.4.1.1.1.1.17 trpzuseraccesstype read-only
Login type (mac, web, dot1x or last-resort).
                     trpzClSessClientSessDot1xAuthMethod 1.3.6.1.4.1.14525.4.4.1.1.1.1.18 trpzclientauthenprotocoltype read-only
Dot1x Authentication Method.
                     trpzClSessClientSessSessionState 1.3.6.1.4.1.14525.4.4.1.1.1.1.19 trpzclientsessionstate read-only
Session non-intermediate state.
                     trpzClSessClientSessAccessMode 1.3.6.1.4.1.14525.4.4.1.1.1.1.20 trpzclientaccessmode read-only
Access mode (type) this client uses (via AP or wired). Obsoletes trpzClSessClientSessAccessType since in 6.0 directly attached APs and DAPs were unified.
                     trpzClSessClientSessApNum 1.3.6.1.4.1.14525.4.4.1.1.1.1.21 trpzapnum read-only
The AP providing wireless service to this client is identified by its administratively assigned AP Number, unique on same AC (switch), regardless of how APs are attached to the AC. Meaningful when trpzClSessClientSessAccessMode = 'ap'. Obsoletes trpzClSessClientSessPortOrNum since in 6.0 directly attached APs and DAPs were unified.
                     trpzClSessClientSessPhysPortNum 1.3.6.1.4.1.14525.4.4.1.1.1.1.22 trpzphysportnumberorzero read-only
The physical port used by this wired-auth client is identified by its port number on the AC (switch). Zero means the port is unknown or not applicable (for example, when trpzClSessClientSessAccessMode = 'ap'). Meaningful when trpzClSessClientSessAccessMode = 'wired'.
                     trpzClSessClientSessDeviceType 1.3.6.1.4.1.14525.4.4.1.1.1.1.23 trpzclientdevicetype read-only
The type of the client device. Is a zero length string if unknown or the device detection feature is disabled.
                     trpzClSessClientSessDeviceGroup 1.3.6.1.4.1.14525.4.4.1.1.1.1.24 trpzclientdevicegroupname read-only
The group that the detected client device type belongs to. Is a zero length string if the device type is unknown or the device detection feature is disabled.
                     trpzClSessClientSessDeviceProfileName 1.3.6.1.4.1.14525.4.4.1.1.1.1.25 trpzclientdeviceprofilename read-only
The name of the device profile associated with the detected client device. A device profile is a collection of policies that apply to one or more types of client devices. Is a zero length string in 'detect-only' mode, if not set or if the device detection feature is disabled. In 'detect-only' mode policy enforcement is disabled.
             trpzClSessRoamingHistoryTable 1.3.6.1.4.1.14525.4.4.1.1.2 no-access
Roaming History Table. Expansion of Client Session Table.
                 trpzClSessRoamingHistoryEntry 1.3.6.1.4.1.14525.4.4.1.1.2.1 no-access
Roaming History Entry.
                     trpzClSessRoamHistMacAddress 1.3.6.1.4.1.14525.4.4.1.1.2.1.1 macaddress no-access
Client MAC address.
                     trpzClSessRoamHistIndex 1.3.6.1.4.1.14525.4.4.1.1.2.1.2 unsigned32 no-access
Entry index.
                     trpzClSessRoamHistApSerialNum 1.3.6.1.4.1.14525.4.4.1.1.2.1.3 trpzapserialnum read-only
Serial Number of the AP this client was connected to.
                     trpzClSessRoamHistRadioNum 1.3.6.1.4.1.14525.4.4.1.1.2.1.4 trpzradionum read-only
Number of the Radio that provided service to this client.
                     trpzClSessRoamHistAccessType 1.3.6.1.4.1.14525.4.4.1.1.2.1.5 trpzaccesstype read-only
Access type used by this client (via AP, DAP or wired). Obsoleted by trpzClSessRoamHistAccessMode.
                     trpzClSessRoamHistApNumOrPort 1.3.6.1.4.1.14525.4.4.1.1.2.1.6 unsigned32 read-only
AP port number, DAP number, or Port number for wired access. Obsoleted by trpzClSessRoamHistApNum.
                     trpzClSessRoamHistIpAddress 1.3.6.1.4.1.14525.4.4.1.1.2.1.7 ipaddress read-only
IP address of the AC (wireless switch) the client or AP was connected to.
                     trpzClSessRoamHistTimeStamp 1.3.6.1.4.1.14525.4.4.1.1.2.1.8 timestamp read-only
The difference between the time the session was created on the roamed-to switch and the time the last switch, the one where the user is at currently, started. The timestamp unit is in hundredths of seconds.
                     trpzClSessRoamHistAccessMode 1.3.6.1.4.1.14525.4.4.1.1.2.1.9 trpzclientaccessmode read-only
Access mode (type) used by this client (via AP or wired). Obsoletes trpzClSessRoamHistAccessType since in 6.0 directly attached APs and DAPs were unified.
                     trpzClSessRoamHistApNum 1.3.6.1.4.1.14525.4.4.1.1.2.1.10 trpzapnum read-only
The administratively assigned AP Number, unique on same AC (switch), regardless of how APs are attached to the AC. Obsoletes trpzClSessRoamHistApNumOrPort since in 6.0 directly attached APs and DAPs were unified.
                     trpzClSessRoamHistPhysPortNum 1.3.6.1.4.1.14525.4.4.1.1.2.1.11 trpzphysportnumberorzero read-only
The physical port used by this wired-auth client is identified by its port number on the AC (switch). Zero means the port is unknown or not applicable (for example, when trpzClSessRoamHistAccessMode = 'ap'). Meaningful when trpzClSessRoamHistAccessMode = 'wired'.
             trpzClSessClientSessionStatisticsTable 1.3.6.1.4.1.14525.4.4.1.1.3 no-access
Client Session Statistics Table.
                 trpzClSessClientSessionStatisticsEntry 1.3.6.1.4.1.14525.4.4.1.1.3.1 no-access
Client Session Statistics Table Entry.
                     trpzClSessClientSessStatsMacAddress 1.3.6.1.4.1.14525.4.4.1.1.3.1.1 macaddress no-access
Client MAC address.
                     trpzClSessClientSessStatsUniPktIn 1.3.6.1.4.1.14525.4.4.1.1.3.1.2 counter64 read-only
Unicast packets in.
                     trpzClSessClientSessStatsUniOctetIn 1.3.6.1.4.1.14525.4.4.1.1.3.1.3 counter64 read-only
Unicast octets in.
                     trpzClSessClientSessStatsUniPktOut 1.3.6.1.4.1.14525.4.4.1.1.3.1.4 counter64 read-only
Unicast packets out.
                     trpzClSessClientSessStatsUniOctetOut 1.3.6.1.4.1.14525.4.4.1.1.3.1.5 counter64 read-only
Unicast octets out.
                     trpzClSessClientSessStatsMultiPktIn 1.3.6.1.4.1.14525.4.4.1.1.3.1.6 counter64 read-only
Multicast packets in.
                     trpzClSessClientSessStatsMultiOctetIn 1.3.6.1.4.1.14525.4.4.1.1.3.1.7 counter64 read-only
Multicast octets in.
                     trpzClSessClientSessStatsEncErrPkt 1.3.6.1.4.1.14525.4.4.1.1.3.1.8 counter64 read-only
Number of packets with encryption errors.
                     trpzClSessClientSessStatsEncErrOctet 1.3.6.1.4.1.14525.4.4.1.1.3.1.9 counter64 read-only
Number of octets with encryption errors.
                     trpzClSessClientSessStatsLastRate 1.3.6.1.4.1.14525.4.4.1.1.3.1.10 trpzradiorate read-only
Last packet data rate.
                     trpzClSessClientSessStatsLastRssi 1.3.6.1.4.1.14525.4.4.1.1.3.1.11 trpzrssi read-only
RSSI (Received Signal Strength Indicator) for last packet, in decibels referred to 1 milliwatt (dBm). A higher value indicates a stronger signal.
                     trpzClSessClientSessStatsLastSNR 1.3.6.1.4.1.14525.4.4.1.1.3.1.12 integer32 read-only
Last packet data Signal to Noise Ratio.
             trpzClSessTotalSessions 1.3.6.1.4.1.14525.4.4.1.1.4 unsigned32 read-only
Total number of sessions.
             trpzClSessClientAddressTable 1.3.6.1.4.1.14525.4.4.1.1.5 no-access
Client Address Table. This table contains the clients' Internet addresses. Each client may have one IPv4 address, one IPv6 link-local address and multiple IPv6 global addresses. Expansion of the Client Session Table.
                 trpzClSessClientAddressEntry 1.3.6.1.4.1.14525.4.4.1.1.5.1 no-access
An entry in the Client Address table. A client's MAC address together with an unsigned integer uniquely identify one of that client's Internet addresses.
                     trpzClSessClientAddressIndex 1.3.6.1.4.1.14525.4.4.1.1.5.1.1 unsigned32 no-access
Last part of the composite index of the Client Address table. The client is identified by the first part of the composite index: 'trpzClSessClientSessMacAddress'. Index 1 corresponds to the IPv4 address of the client. Index 2 corresponds to the IPv6 link-local address of the client. Indexes 3-9 are reserved for future use. Indexes starting at 10 correspond to IPv6 global addresses of the client; the number of IPv6 addresses per client may vary.
                     trpzClSessClientAddressType 1.3.6.1.4.1.14525.4.4.1.1.5.1.2 inetaddresstype read-only
The address type of 'trpzClSessClientAddressValue'.
                     trpzClSessClientAddressValue 1.3.6.1.4.1.14525.4.4.1.1.5.1.3 inetaddress read-only
Client Internet address. The type of this address is specified in 'trpzClSessClientAddressType'.
         trpzClientSessionConformance 1.3.6.1.4.1.14525.4.4.1.2
             trpzClientSessionCompliances 1.3.6.1.4.1.14525.4.4.1.2.1
                 trpzClientSessionCompliance 1.3.6.1.4.1.14525.4.4.1.2.1.1
The compliance statement for devices that implement the Client Session MIB. This compliance statement was for releases 4.1 and 4.2 of AC (wireless switch) software. This compliance statement is replaced by trpzClientSessionComplianceRev2.
                 trpzClientSessionComplianceRev2 1.3.6.1.4.1.14525.4.4.1.2.1.2
The compliance statement for devices that implement the Client Session MIB. This compliance statement was for releases 5.0 and 6.0 of AC (wireless switch) software. This compliance statement is replaced by trpzClientSessionComplianceRev3.
                 trpzClientSessionComplianceRev3 1.3.6.1.4.1.14525.4.4.1.2.1.3
The compliance statement for devices that implement the Client Session MIB. This compliance statement is for releases 6.2 to 7.7 of AC (wireless switch) software. This compliance statement is replaced by trpzClientSessionComplianceRev4.
                 trpzClientSessionComplianceRev4 1.3.6.1.4.1.14525.4.4.1.2.1.4
The compliance statement for devices that implement the Client Session MIB. This compliance statement is for releases 8.0 and greater of AC (wireless switch) software.
             trpzClientSessionGroups 1.3.6.1.4.1.14525.4.4.1.2.2
                 trpzClientSessionCommonGroup 1.3.6.1.4.1.14525.4.4.1.2.2.1
Mandatory group of objects implemented to provide Client Session info in releases 4.1 and 4.2 of AC (wireless switch) software. Replaced by trpzClientSessClientSessionTableGroup, trpzClientSessRoamingHistoryTableGroup, trpzClientSessClientSessionStatisticsTableGroup.
                 trpzClientSessScalarsGroup 1.3.6.1.4.1.14525.4.4.1.2.2.2
Group of scalar objects implemented to provide general Client info in releases 5.0 and greater.
                 trpzClientSessClientSessionTableGroup 1.3.6.1.4.1.14525.4.4.1.2.2.3
Group of columnar objects implemented to provide Client Session info in releases 5.0 and 6.0. Replaced by trpzClientSessClientSessionTableGroupRev2.
                 trpzClientSessRoamingHistoryTableGroup 1.3.6.1.4.1.14525.4.4.1.2.2.4
Group of columnar objects implemented to provide roaming history per Client Session in releases 5.0 and 6.0. Replaced by trpzClientSessRoamingHistoryTableGroupRev2.
                 trpzClientSessClientSessionStatisticsTableGroup 1.3.6.1.4.1.14525.4.4.1.2.2.5
Group of columnar objects implemented to provide statistics per Client Session in releases 5.0 and greater.
                 trpzClientSessClientSessionTableGroupRev2 1.3.6.1.4.1.14525.4.4.1.2.2.6
Group of columnar objects implemented to provide Client Session info in releases 6.2 to 7.7.
                 trpzClientSessRoamingHistoryTableGroupRev2 1.3.6.1.4.1.14525.4.4.1.2.2.7
Group of columnar objects implemented to provide roaming history per Client Session in releases 6.2 and greater.
                 trpzClSessClientAddressTableGroup 1.3.6.1.4.1.14525.4.4.1.2.2.8
Group of columnar objects implemented to provide a complete listing of the clients' Internet addresses in releases 8.0 and greater.
                 trpzClientSessClientSessionTableGroupRev3 1.3.6.1.4.1.14525.4.4.1.2.2.9
Group of columnar objects implemented to provide Client Session info in releases 8.0 and greater.