TRANZEO-MIB: View SNMP OID List / Download MIB

VENDOR: TRANZEO WIRELESS TECHNOLOGIES


 Home MIB: TRANZEO-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tranzeo 1.3.6.1.4.1.24575
             signal 1.3.6.1.4.1.24575.1
                 rssi 1.3.6.1.4.1.24575.1.1
                     signallow 1.3.6.1.4.1.24575.1.1.1 integer read-only
This object represents the lowest received signal strength on the current channel in dBm. A 0 means no wireless connection.
                     signalaverage 1.3.6.1.4.1.24575.1.1.2 integer read-only
This object represents the average received signal strength on the current channel in dBm. A 0 means no wireless connection.
                     signalhigh 1.3.6.1.4.1.24575.1.1.3 integer read-only
This object represents the highest received signal strength on the current channel in dBm. A 0 means no wireless connection.
                 noise 1.3.6.1.4.1.24575.1.2
                     noiselow 1.3.6.1.4.1.24575.1.2.1 integer read-only
This object represents the lowest noise on the current channel in dBm. A 0 means no wireless connection.
                     noiseaverage 1.3.6.1.4.1.24575.1.2.2 integer read-only
This object represents the average noise on the current channel in dBm. A 0 means no wireless connection.
                     noisehigh 1.3.6.1.4.1.24575.1.2.3 integer read-only
This object represents the highest noise on the current channel in dBm. A 0 means no wireless connection.
             probeConfig 1.3.6.1.4.1.24575.2
                 probeResetControl 1.3.6.1.4.1.24575.2.1 integer read-write
Setting this object to warmBoot(2) causes the device to restart the application software with current configuration parameters saved in non-volatile memory. Setting this object to coldBoot(3) causes the device to reinitialize configuration parameters in non-volatile memory to default values and restart the application software. When the device is running normally, this variable has a value of running(1). Setting this object to autoconfig(4) causes the device to reboot and download the configuration using TFTP. Enumeration: 'running': 1, 'autoconfig': 4, 'coldBoot': 3, 'warmBoot': 2.
             stationStat 1.3.6.1.4.1.24575.3
                 stnNumber 1.3.6.1.4.1.24575.3.1 integer read-only
This object represents the number of stations that associates to this AP.
             assocStation 1.3.6.1.4.1.24575.4
                 stnIpAddr 1.3.6.1.4.1.24575.4.1 ipaddress read-only
This object represents the ip address of associated STN to this AP.
                 stnMacAddr 1.3.6.1.4.1.24575.4.2 physaddress read-only
This object represents the MAC address of associated STN to this AP.