TN-MGMT-TDM-MIB: View SNMP OID List / Download MIB

VENDOR: TRANSITION ENGINEERING INC.


 Home MIB: TN-MGMT-TDM-MIB
Download as:   
SNMPv2-CONF, TRANSITION-TC, IF-MIB, SNMPv2-SMI, TN-MGMT-MIB, ENTITY-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 tnIfTDMAlarmIndicationSignalEvt 1.3.6.1.4.1.868.2.5.3.0.6
A alarm indication signal event is sent when there is a warning or alarm on TDM port.
     tnIfTDMTable 1.3.6.1.4.1.868.2.5.3.1.2.6 no-access
This table has entries for the TDM attributes.
         tnIfTDMEntry 1.3.6.1.4.1.868.2.5.3.1.2.6.1 no-access
A entry in the table represents TDM attributes.
             tnIfTDMAISTransmit 1.3.6.1.4.1.868.2.5.3.1.2.6.1.1 integer read-write
Transmit AIS(All Ones/BLUE) on Fiber(Copper) as an error signal when Copper interface(Fiber Interface) is down. When this error signal is transmitted, the AIS of the device on the other end is activated, if supported Enumeration: 'disabled': 2, 'notApplicable': 3, 'enabled': 1.
             tnIfTDMAISFormat 1.3.6.1.4.1.868.2.5.3.1.2.6.1.2 integer read-write
Transmit AIS(All Ones:1111... sequence/BLUE:0101... sequence) on Fiber(Copper) as an error signal for DS3/E3/STS-1 port Enumeration: 'blue': 2, 'notApplicable': 3, 'allones': 1.
             tnIfTDMAlarmIndicationSignal 1.3.6.1.4.1.868.2.5.3.1.2.6.1.3 integer read-only
When equal to alarm(1), this means that the other end has TAOS enabled and is currently transmitting an alarm condition. when equal to normal, this means no alarm. Enumeration: 'alarm': 1, 'normal': 2.
             tnIfTDMLongHaul 1.3.6.1.4.1.868.2.5.3.1.2.6.1.4 integer read-only
This variable indicates the current position of the remote device's Short/Long haul configuration switch. Enumeration: 'notApplicable': 3, 'yes': 1, 'no': 2.
             tnIfTDMType 1.3.6.1.4.1.868.2.5.3.1.2.6.1.5 integer read-only
This variable indicates the type of the current device. T1=1.544MHz; E1=2.048MHz;E3 = 34.4Mb/s; DS3 = 44.7Mb/s; STS-1 = 51.8Mb/s Enumeration: 'dS3': 4, 'sts-1': 6, 'unknown': 0, 'j1': 3, 't1': 1, 'e1': 2, 'e3': 5.
             tnIfTDMT1E1LineBuildout 1.3.6.1.4.1.868.2.5.3.1.2.6.1.6 integer read-only
The characteristics T1E1 card's copper interface. Enumeration: 't1SH-DSX-6V': 8, 't1SH-DSX-533-655': 7, 't1SH-DSX-266-399': 5, 'unknown': 0, 't1SH-DSX-133-266': 4, 'e13-0V120ohm': 1, 'e12-37V75ohm': 2, 't1SH-DSX-399-533': 6, 't1LH-m7-5dB': 10, 't1SH-DSX-0-133ANSIT1403': 3, 't1LH-0dB': 9, 't1LH-m15dB': 11, 't1LH-m22-5dB': 12.
             tnIfTDMDS3E3LineBuildout 1.3.6.1.4.1.868.2.5.3.1.2.6.1.7 integer read-write
The characteristics of DS3E3 card's copper interface. Enumeration: 'unknown': 0, 'boost': 1, 'normal': 2.
             tnIfTDMConnectorType 1.3.6.1.4.1.868.2.5.3.1.2.6.1.8 cpsconnector read-only
The style of connector built into this device.
     tnIfTDMExtTable 1.3.6.1.4.1.868.2.5.3.1.2.9 no-access
This table has entries for the Extral TDM attributes.
         tnIfTDMExtEntry 1.3.6.1.4.1.868.2.5.3.1.2.9.1 no-access
A entry in the table represents Extral TDM attributes.
             tnIfTDMExtId 1.3.6.1.4.1.868.2.5.3.1.2.9.1.1 integer no-access
An index that uniquely identifies an entry in the tnIfTDMExtTable. This index permits the same interface to have several different channels
             tnIfTDMExtAISTrasmit 1.3.6.1.4.1.868.2.5.3.1.2.9.1.2 integer read-write
Transmit AIS(All Ones/BLUE) on the Channel as an error signal when Copper interface(Fiber Interface) is down. When this error signal is transmitted, the AIS of the device on the other end is activated, if supported Enumeration: 'disabled': 2, 'notApplicable': 3, 'enabled': 1.
             tnIfTDMExtAISFormat 1.3.6.1.4.1.868.2.5.3.1.2.9.1.3 integer read-write
Transmit AIS(All Ones:1111... sequence/BLUE:0101... sequence) on the Channel as an error signal for the pair port Enumeration: 'blue': 2, 'notApplicable': 3, 'allones': 1.
             tnIfTDMExtAlarmIndicationSingnal 1.3.6.1.4.1.868.2.5.3.1.2.9.1.4 integer read-only
When equal to alarm(1), this means that the other end of Channel has AIS enabled and is currently transmitting an alarm condition. when equal to normal(2), this means no alarm. when equal to yellow(3), this means the other end of Channel has YELLOW enabled and is currently transmitting a YELLOW condition. when equal to red(4), this means the local end of Channel has detect a LOS on receiver. Enumeration: 'alarm': 1, 'yellow': 3, 'red': 4, 'normal': 2.
             tnIfTDMExtLoopback 1.3.6.1.4.1.868.2.5.3.1.2.9.1.5 integer read-write
This variable indicates the loopback state of the current Channel Enumeration: 'disabled': 2, 'notApplicable': 3, 'enabled': 1.
             tnIfTDMExtYellowTrasmit 1.3.6.1.4.1.868.2.5.3.1.2.9.1.6 integer read-write
Transmit Yellow on the Channel as an error signal when Local Copper Interface is down. When this error signal is transmitted. Enumeration: 'disabled': 2, 'notApplicable': 3, 'enabled': 1.
     tnIfTDM2Table 1.3.6.1.4.1.868.2.5.3.1.2.10 no-access
This table has entries for the TDM 2 attributes.
           tnIfTDM2Entry 1.3.6.1.4.1.868.2.5.3.1.2.10.1 no-access
A entry in the table represents the TDM 2 attributes.
               tnIfTDM2FiberLineNum 1.3.6.1.4.1.868.2.5.3.1.2.10.1.1 integer read-only
This variable is indicate the links number of the Fiber Port, maybe single line or dual line
               tnIfTDM2FiberActiveLine 1.3.6.1.4.1.868.2.5.3.1.2.10.1.2 integer read-write
This variable is indicate the active fiber link, if a multi-fiber line is used for hardware redundancy Enumeration: 'primary': 0, 'secondary': 1.
               tnIfTDM2FiberRevertive 1.3.6.1.4.1.868.2.5.3.1.2.10.1.3 integer read-write
This variable is used to decide whether to revertive the fiber link to primary link if applicable Enumeration: 'disabled': 2, 'notApplicable': 3, 'enabled': 1.
               tnIfTDM2FiberPrimaryLinkStatus 1.3.6.1.4.1.868.2.5.3.1.2.10.1.4 integer read-only
This variable indicates the fiber port primary line link status Enumeration: 'down': 2, 'unknown': 4, 'testing': 3, 'up': 1.
               tnIfTDM2FiberSecondaryLinkStatus 1.3.6.1.4.1.868.2.5.3.1.2.10.1.5 integer read-only
This variable indicates the fiber port secondary line link status Enumeration: 'down': 2, 'unknown': 4, 'testing': 3, 'up': 1.
               tnIfTDM2InBandLPEnable 1.3.6.1.4.1.868.2.5.3.1.2.10.1.6 integer read-write
This variable indicates whether In-band Loopback detect is enabled Enumeration: 'disabled': 2, 'notApplicable': 3, 'enabled': 1.
               tnIfTDM2InBandLPStartPatten 1.3.6.1.4.1.868.2.5.3.1.2.10.1.7 displaystring read-write
This binary string is used to set the In-band Loopback start Patten, such as 11000 string
               tnIfTDM2InBandLPStopPatten 1.3.6.1.4.1.868.2.5.3.1.2.10.1.8 displaystring read-write
This binary string is used to set the In-band Loopback stop Patten, such as 11100 string
               tnIfTDM2InBandPEERLPEnable 1.3.6.1.4.1.868.2.5.3.1.2.10.1.9 integer read-write
This variable indicates whether the PEER interface In-band Loopback detect is enabled Enumeration: 'disabled': 2, 'notApplicable': 3, 'enabled': 1.
               tnIfTDM2InBandPEERLPStartPatten 1.3.6.1.4.1.868.2.5.3.1.2.10.1.10 displaystring read-write
This binary string is used to set the PEER interface In-band Loopback start Patten, such as 11000 string
               tnIfTDM2InBandPEERLPStopPatten 1.3.6.1.4.1.868.2.5.3.1.2.10.1.11 displaystring read-write
This binary string is used to set the PEER interface In-band Loopback stop Patten, such as 11100 string
               tnIfTDM2InBandLPTimeoutEnable 1.3.6.1.4.1.868.2.5.3.1.2.10.1.12 integer read-write
This variable indicates whether the In-band Loopback timeout watchdog is enabled Enumeration: 'disabled': 2, 'notApplicable': 3, 'enabled': 1.
               tnIfTDM2InBandLPTimeoutCount 1.3.6.1.4.1.868.2.5.3.1.2.10.1.13 integer read-write
This variable is used to set the In-band Loopback timeout watchdog value, the unit is minute
               tnIfTDM2InBandPEERLPTimeoutEnable 1.3.6.1.4.1.868.2.5.3.1.2.10.1.14 integer read-write
This variable indicates whether the Peer In-band Loopback timeout watchdog is enabled Enumeration: 'disabled': 2, 'notApplicable': 3, 'enabled': 1.
               tnIfTDM2InBandPEERLPTimeoutCount 1.3.6.1.4.1.868.2.5.3.1.2.10.1.15 integer read-write
This variable is used to set the Peer In-band Loopback timeout watchdog value, the unit is minute