TN-EVC-MIB: View SNMP OID List / Download MIB
VENDOR: TRANSITION ENGINEERING INC.
| Home | MIB: TN-EVC-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| tnEvcMib | 1.3.6.1.4.1.868.2.5.106 |
TBD |
||
| tnEvcObjects | 1.3.6.1.4.1.868.2.5.106.1 | |||
| tnEvcCfgMgmtGroup | 1.3.6.1.4.1.868.2.5.106.1.1 | |||
| tnEvcPortTable | 1.3.6.1.4.1.868.2.5.106.1.1.1 | no-access |
This table displays and sets current EVC port configurations. This table has a sparse depedent relationship on the ifTable, containing a row for each ifEntry having an ifType of 'ethernetCsmacd' capable of supporting Ethernet services. |
|
| 1.3.6.1.4.1.868.2.5.106.1.1.1.1 | no-access |
This entry represents an EVC port configuration. |
||
| tnEvcPortDEIMode | 1.3.6.1.4.1.868.2.5.106.1.1.1.1.1 | integer | read-write |
The DEI mode for an NNI port determines whether frames transmitted on the port will have the DEI field in the outer tag marked based on the colour of the frame. The allowed values are: 'coloured': The DEI is 1 for yellow frames and 0 for green frames. 'fixed': The DEI value is determined by ECE rules. Enumeration: 'fixed': 2, 'coloured': 1. |
| tnEvcPortTagMode | 1.3.6.1.4.1.868.2.5.106.1.1.1.1.2 | integer | read-write |
The inner tag type is used to determine whether an inner tag is inserted in frames forwarded to NNI ports. The possible values are: 'inner': An inner tag is not inserted. 'outer': An inner C-tag is inserted. Enumeration: 'outer': 2, 'inner': 1. |
| tnEvcPortAddressMode | 1.3.6.1.4.1.868.2.5.106.1.1.1.1.3 | integer | read-write |
The IP/MAC address mode specifying whether the EVC classification must be based on source (SMAC/SIP) or destination (DMAC/DIP) addresses. The allowed values are: 'source': Enable SMAC/SIP matching. 'destination': Enable DMAC/DIP matching. Enumeration: 'source': 1, 'destination': 2. |
| tnEvcTable | 1.3.6.1.4.1.868.2.5.106.1.1.2 | no-access |
This table contains the configuration of EVC(Ethernet Virtual Circuit). |
|
| 1.3.6.1.4.1.868.2.5.106.1.1.2.1 | no-access |
This entry represents an EVC. Each entry in this table represents an EVC and can be created or deleted by the management system. |
||
| tnEvcIndex | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.1 | integer | no-access |
The identifier of the EVC. |
| tnEvcNNIPortlist | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.2 | portlist | read-only |
The list of Network to Network Interfaces for the EVC. |
| tnEvcVid | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.3 | vlanidorany | read-only |
The VLAN ID in the PB network. It may be inserted in a C-tag, S-tag or S-custom tag depending on the NNI port VLAN configuration. The allowed range is from 1 through 4094 |
| tnEvcIVid | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.4 | vlanidorany | read-only |
The Internal/classified VLAN ID in the PB network. The allowed range is from 1 through 4094 |
| tnEvcLearning | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.5 | integer | read-only |
The learning mode for the EVC controls whether source MAC addresses are learned for frames matching the EVC. Learning may be disabled if the EVC only includes two UNI/NNI ports. The allowed values are: Enabled: Learning is enabled (MAC addresses are learned). Disabled: Learning is disabled (MAC addresses are not learned). Enumeration: 'enable': 1, 'disable': 2. |
| tnEvcInnerTagType | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.6 | integer | read-only |
The inner tag type is used to determine whether an inner tag is inserted in frames forwarded to NNI ports. The allowed values are: None: An inner tag is not inserted. cTag: An inner C-tag is inserted. sTag: An inner S-tag is inserted. sCustomTag: An inner tag is inserted and the tag type is determined by the VLAN port configuration of the NNI. Enumeration: 'cTag': 2, 'none': 1, 'sCustomTag': 4, 'sTag': 3. |
| tnEvcInnerVidMode | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.7 | integer | read-only |
The inner VID Mode affects the VID in the inner and outer tag. The allowed values are: normal: The VID of the two outer tags aren't swapped. tunnel: The VID of the two outer tags are swapped, so that the VID of the outer tag is taken from the Inner Tag configuration and the VID of the inner tag is the EVC VID. In this mode, the NNI ports are normally configured to do EVC classification based on the inner tag. Enumeration: 'tunnel': 2, 'normal': 1. |
| tnEvcInnerVid | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.8 | vlanidoranyornone | read-only |
The Inner tag VLAN ID. The allowed range is from 0 through 4094. |
| tnEvcInnerPCPDEIPreservation | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.9 | integer | read-only |
The inner tag PCP and DEI preservation. The allowed values are: Preserved: The inner tag PCP and DEI is preserved. Fixed: The inner tag PCP and DEI is fixed. Enumeration: 'fixed': 2, 'preserved': 1. |
| tnEvcInnerPCP | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.10 | integer | read-only |
The inner tag PCP value. The allowed range is from 0 through 7. |
| tnEvcInnerDEI | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.11 | integer | read-only |
The inner tag DEI value. The allowed value is 0 or 1. |
| tnEvcOuterVid | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.12 | vlanidoranyornone | read-only |
The Outer tag VLAN ID. The allowed range is from 0 through 4094. |
| tnEvcStatus | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.13 | rowstatus | read-only |
The status of this conceptual row entry of EVC table. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. For a detailed description of this object, please refer to SNMPv2-TC MIB. |
| tnEvcPolicerID | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.14 | integer | read-only |
The ingress bandwidth profile mode for the EVC. The possible values are: Specific: The allowed range is from 1 through 128. Discard: All received frames are discarded for the EVC. The value is 4094. None: None bandwidth profile for the EVC. The value is 4095. |
| tnEvcName | 1.3.6.1.4.1.868.2.5.106.1.1.2.1.15 | octet string | read-only |
EVC Administrative Name. |
| tnEvcEceTable | 1.3.6.1.4.1.868.2.5.106.1.1.3 | no-access |
This table contains the configuration of EVC control entry. |
|
| 1.3.6.1.4.1.868.2.5.106.1.1.3.1 | no-access |
This entry represents an ECE. The system automatically creates an entry when the system or the EMS/NMS creates a row in the cevcECETable. Likewise, the system automatically destroys an entry when the system or the EMS/NMS destroys the corresponding row in the cevcECETable. |
||
| tnEvcEceId | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.1 | integer | no-access |
The identifier of the ECE. |
| tnEvcEceNextEceId | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.2 | integer | read-only |
Specify the created ECE is placed before which ECE. |
| tnEvcEceUNIPortlist | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.3 | portlist | read-only |
The list of User to Network Interfaces for the ECE. |
| tnEvcEceTagType | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.4 | integer | read-only |
The tag type for the ECE. The possible values are: tagged: The ECE will match tagged frames only. untagged: The ECE will match untagged frames only. any: The ECE will match both tagged and untagged frames. Enumeration: 'untagged': 2, 'tagged': 1, 'any': 3. |
| tnEvcEceTagVIDFilterType | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.5 | integer | read-only |
The VLAN ID filter for matching the ECE. It only significant if tag type 'Tagged' is selected. The possible values are: any: No VLAN ID filter is specified. (VLAN ID filter status is 'don't-care'.) specific: If you want to filter a specific VLAN ID value with this ECE, choose this value. A field for entering a specific value appears. range: If you want to filter a specific VLAN ID range filter with this ECE, choose this value. A field for entering a range appears. Enumeration: 'specific': 2, 'range': 3, 'any': 1. |
| tnEvcEceTagVIDFilterVal | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.6 | vlanidoranyornone | read-only |
When 'Specific' is selected for the VLAN ID filter, you can enter a specific value. The allowed value is from 0 through 4094. |
| tnEvcEceTagVIDFilterStart | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.7 | vlanidoranyornone | read-only |
When 'Range' is selected for the VLAN ID filter, you can enter a specific range. The allowed range start is from 0 through 4094. |
| tnEvcEceTagVIDFilterEnd | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.8 | vlanidoranyornone | read-only |
When 'Range' is selected for the VLAN ID filter, you can enter a specific range. The allowed range end is from 0 through 4094. |
| tnEvcEceTagPCP | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.9 | bits | read-only |
The PCP value for mataching the ECE. It only significant if tag type 'Tagged' is selected. The possible values are: any: The ECE will match any PCP value(all bits will be set to 1). specific: each bit matchs a specific PCP of ECE(from bit0 to bit7). range: The ECE will match PCP values in the selected range, valid range bit0-bit1, bit2-bit3, bit4-bit5, bit6-bit7, bit0-bit3 or bit4-bit7. Bits: 'none': 0. |
| tnEvcEceTagDEI | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.10 | integer | read-only |
The DEI value for mataching the ECE. It only significant if tag type 'Tagged' is selected. The allowed value is: 0, 1 or Any. Enumeration: 'dei0': 2, 'dei1': 3, 'any': 1. |
| tnEvcEceTagFrameType | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.11 | integer | read-only |
The frame type for the ECE. The possible values are: any: The ECE will match any frame type. etype: The ECE will match Ethernet Type frames only. llc: The ECE will match LLC frames only. snap: The ECE will match SNAP frames only. ipv4: The ECE will match IPv4 frames only. ipv6: The ECE will match IPv6 frames only. l2cp: The ECE will match L2CP frames only. Enumeration: 'l2cp': 7, 'etype': 2, 'llc': 3, 'ipv4': 5, 'ipv6': 6, 'snap': 4, 'any': 1. |
| tnEvcEceProtoType | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.12 | integer | read-only |
The IP protocol for matching the ECE. The possible values are: any: No protocol filter is specified. (Protocol filter status is 'don't-care'.) udp: Specify the UDP for matching the ECE. tcp: Specify the TCP for matching the ECE. other: If you want to filter a specific protocol value with this ECE, choose this value. A field for entering a specific value appears. Enumeration: 'udp': 2, 'other': 4, 'any': 1, 'tcp': 3. |
| tnEvcEceProtoVal | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.13 | integer | read-only |
When 'Specific' is selected for the protocol filter, you can enter a specific value. The allowed value is from 0 through 255. |
| tnEvcEceDscpFilterType | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.14 | integer | read-only |
The DSCP filter for matching the ECE. The possible values are: any: No DSCP filter is specified. (DSCP filter status is 'don't-care'.) specific: If you want to filter a specific DSCP value with this ECE, choose this value. A field for entering a specific value appears. range: If you want to filter a specific DSCP range filter with this ECE, choose this value. A field for entering a range appears. Enumeration: 'specific': 2, 'range': 3, 'any': 1. |
| tnEvcEceDscpFilterVal | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.15 | integer | read-only |
When 'Specific' is selected for the DSCP filter, you can enter a specific value. The allowed value is from 0 through 63. |
| tnEvcEceDscpRangeStart | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.16 | integer | read-only |
When 'Range' is selected for the DSCP filter, you can enter a specific range. The allowed range start is from 0 through 63. |
| tnEvcEceDscpRangeEnd | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.17 | integer | read-only |
When 'Range' is selected for the DSCP filter, you can enter a specific range. The allowed range end is from 0 through 63. |
| tnEvcEceSrcPortFilterType | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.18 | integer | read-only |
The TCP/UDP source port for matching the ECE. It only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: any: No TCP/UDP source port filter is specified. (Source port filter status is 'don't-care'.) specific: If you want to filter a specific TCP/UDP source port No. with this ECE, choose this value. A field for entering a specific No. appears. range: If you want to filter a specific TCP/UDP source port range filter with this ECE, choose this value. A field for entering a range appears. Enumeration: 'specific': 2, 'range': 3, 'any': 1. |
| tnEvcEceSrcPortFilterNo | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.19 | integer | read-only |
When 'Specific' is selected for the source port filter, you can enter a specific value. The allowed value is from 0 through 65535. |
| tnEvcEceSrcPortRangeStart | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.20 | integer | read-only |
When 'Range' is selected for the source port filter, you can enter a specific range. The allowed range start is from 0 through 65535. |
| tnEvcEceSrcPortRangeEnd | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.21 | integer | read-only |
When 'Range' is selected for the source port filter, you can enter a specific range. The allowed range end is from 0 through 65535. |
| tnEvcEceDstPortFilterType | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.22 | integer | read-only |
The TCP/UDP destination port for matching the ECE. It only significant if protocol filter 'UDP' or 'TCP' is selected. The possible values are: any: No TCP/UDP destination port filter is specified. (Source port filter status is 'don't-care'.) specific: If you want to filter a specific TCP/UDP source port No. with this ECE, choose this value. A field for entering a specific No. appears. range: If you want to filter a specific TCP/UDP source port range filter with this ECE, choose this value. A field for entering a range appears. Enumeration: 'specific': 2, 'range': 3, 'any': 1. |
| tnEvcEceDstPortFilterNo | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.23 | integer | read-only |
When 'Specific' is selected for the destination port filter, you can enter a specific value. The allowed value is from 0 through 65535. |
| tnEvcEceDstPortRangeStart | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.24 | integer | read-only |
When 'Range' is selected for the destination port filter, you can enter a specific range. The allowed range start is from 0 through 65535. |
| tnEvcEceDstPortRangeEnd | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.25 | integer | read-only |
When 'Range' is selected for the destination port filter, you can enter a specific range. The allowed range end is from 0 through 65535. |
| tnEvcEceIpv4DipSipFilter | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.26 | integer | read-only |
The source/destination IP address for matching the ECE. It depend on by the port address mode, when port address mode is set to 'Source' then the field is used for source address. Similarly when port address mode is set to 'Destination' then the field is used for destination address. The possible values are: Any: No SIP/DIP filter is specified. (SIP/DIP filter status is 'don't-care'.) Host: If you want to filter a specific host address with this ECE, choose this value. A field for entering a host address appears. Network: If you want to filter a specific network address with this ECE, choose this value. A Two fields for entering a specific network address and network mask appears. Enumeration: 'host': 2, 'any': 1, 'network': 3. |
| tnEvcEceIpv4DipSipAddr | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.27 | inetaddress | read-only |
When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific host or network address. |
| tnEvcEceIpv4DipSipMask | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.28 | inetaddress | read-only |
When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific network mask. |
| tnEvcEceIpv4Fragment | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.29 | integer | read-only |
The IPv4 Fragment for matching the ECE. This involves the settings for the More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for an IPv4 frame. The possible values are: any: The ECE will match any MF bit. fragment: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero must be able to match this entry. nonfragment: IPv4 frames where the MF bit is set or the FRAG OFFSET field is greater than zero must not be able to match this entry. Enumeration: 'fragment': 2, 'nonfragment': 3, 'any': 1. |
| tnEvcEceIpv6DipSipFilter | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.30 | integer | read-only |
The source/destination IP address for matching the ECE. It depend on by the port address mode, when port address mode is set to 'Source' then the field is used for source address. Similarly when port address mode is set to 'Destination' then the field is used for destination address. The possible values are: Any: No SIP/DIP filter is specified. (SIP/DIP filter status is 'don't-care'.) specific: If you want to filter a specific host address with this ECE, choose this value. A field for entering a host address appears. Enumeration: 'specific': 2, 'any': 1. |
| tnEvcEceIpv6DipSipAddr | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.31 | unsigned32 | read-only |
When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific host or network address. When 'IPv6' is selected for the Frame Type, the field only supported 32 bits for IPv6 address. |
| tnEvcEceIpv6DipSipMask | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.32 | unsigned32 | read-only |
When 'Host' or 'Network' is selected for the SIP/DIP filter, you can enter a specific network mask. When 'IPv6' is selected for the Frame Type, the field only supported 32 bits for IPv6 address mask. |
| tnEvcEceOuterMode | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.33 | integer | read-only |
The outer tag PCP and DEI preservation for the ECE. The possible values are: enabled: Enable outer tag for nni-to-uni direction for the ECE. disabled: Disable outer tag for nni-to-uni direction for the ECE. Enumeration: 'disabled': 2, 'enabled': 1. |
| tnEvcEceOuterPCPDEIPreserve | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.34 | integer | read-only |
The outer tag PCP and DEI preservation for the ECE. The possible values are: preserved: The outer tag PCP and DEI is preserved. fixed: The outer tag PCP and DEI is fixed. Enumeration: 'fixed': 2, 'preserved': 1. |
| tnEvcEceOuterPCP | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.35 | integer | read-only |
The outer tag PCP value for the ECE. The allowed range is from 0 through 7. |
| tnEvcEceOuterDEI | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.36 | integer | read-only |
The outer tag DEI value for the ECE. The allowed value is 0 or 1. |
| tnEvcEceActDirection | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.37 | integer | read-only |
The EVCs and ECEs are used to setup flows in one or both directions as determined by the ECE Direction parameter. If the ECE is bidirectional, the ingress rules of the NNI ports will be setup to match the traffic being forwarded to NNI ports. The possible values are: both: Bidirectional. uni2nni: Unidirectional from UNI to NNI. nni2uni: Unidirectional from NNI to UNI. Enumeration: 'both': 1, 'uni2nni': 2, 'nni2uni': 3. |
| tnEvcEceActEvcidFilterType | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.38 | integer | read-only |
The outer tag PCP and DEI preservation for the ECE. The possible values are: any: No EVC ID filter is specified. (EVC ID filter status is 'don't-care'.) specific: If you want to filter a specific EVC ID with this ECE, choose this value. A field for entering a specific value appears. Enumeration: 'specific': 2, 'any': 1. |
| tnEvcEceActEvcidVal | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.39 | integer | read-only |
When 'Specific' is selected for the VLAN ID filter, you can enter a specific value. The allowed value is from 1 through 128. |
| tnEvcEceActTagPopCount | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.40 | integer | read-only |
The ingress tag pop count for the ECE. The allowed range is from 0 through 2. |
| tnEvcEceActPolicyId | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.41 | integer | read-only |
The ACL Policy ID for the ECE for matching ACL rules. The allowed range is from 0 through 255. |
| tnEvcEceActClass | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.42 | integer | read-only |
The traffic class for the ECE. The allowed range is from 0 through 8 or disabled. Enumeration: 'tc6': 7, 'tc7': 8, 'tc4': 5, 'tc5': 6, 'tc2': 3, 'tc3': 4, 'tc0': 1, 'tc1': 2, 'disabled': 9. |
| tnEvcEceDMacSMacFilterType | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.43 | integer | read-only |
The source/destination MAC address for matching the ECE. It depend on by the port address mode, when port address mode is set to 'Source' then the field is used for source MAC address. Similarly when port address mode is set to 'Destination' then the field is used for destination MAC address. The possible values are: any: No SMAC/DMAC filter is specified. (SMAC/DMAC filter status is 'don't-care'.) specific: If you want to filter a specific SMAC/DMAC value with this ECE, choose this value. A field for entering a specific value appears. Enumeration: 'specific': 2, 'any': 1. |
| tnEvcEceDMacSMacVal | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.44 | macaddress | read-only |
When 'Specific' is selected for the SMAC/DMAC filter, you can enter a specific value. The legal format is 'xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx' (x is a hexadecimal digit). |
| tnEvcEceDMacType | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.45 | integer | read-only |
The destination MAC address for matching the ECE. The possible values are: any: No destination MAC address is specified. unicast: Frame must be unicast. multicast: Frame must be multicast. broadcast: Frame must be broadcast. specific: If you want to filter a specific DMAC value with this ECE, choose this value. Enumeration: 'unicast': 2, 'broadcast': 4, 'multicast': 3, 'any': 1, 'specific': 5. |
| tnEvcEceConflict | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.46 | integer | read-only |
Indicates the hardware status of the specific ECE. The specific ECE is not applied to the hardware due to hardware limitations. Enumeration: 'yes': 1, 'no': 2. |
| tnEvcEceStatus | 1.3.6.1.4.1.868.2.5.106.1.1.3.1.47 | rowstatus | read-only |
The status of this conceptual row entry of ECE table. This object isused to manage the creation and deletion of conceptual rows. The status column has six defined values: - 'active', which indicates that the conceptual row is available for use by the managed device; - 'notInService', which indicates that the conceptual row exists in the agent, but is unavailable for use by the managed device (see NOTE below); - 'notReady', which indicates that the conceptual row exists in the agent, but is missing information necessary in order to be available for use by the managed device; - 'createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - 'createAndWait', which is supplied by a management station wishing to create a new instance of a conceptual row (but not make it available for use by the managed device); and, - 'destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row. For a detailed description of this object, please refer to SNMPv2-TC MIB. |
| tnEvcBandwidthProfilesTable | 1.3.6.1.4.1.868.2.5.106.1.1.4 | no-access |
This entry displays and sets current EVC ingress bandwidth profile configurations. These policers may be used to limit the traffic received on UNI ports. |
|
| 1.3.6.1.4.1.868.2.5.106.1.1.4.1 | no-access |
This entry represents an entry of EVC ingress bandwidth profile configuration. |
||
| tnEvcBandwidthProfilesIndex | 1.3.6.1.4.1.868.2.5.106.1.1.4.1.1 | integer | no-access |
The EVC bandwidth profiles policer index. |
| tnEvcBandwidthProfilesPolicerMode | 1.3.6.1.4.1.868.2.5.106.1.1.4.1.2 | integer | read-only |
The colour mode of the bandwidth profile. The allowed values are: coupled: Colour-aware mode with coupling enabled. aware: Colour-aware mode with coupling disabled. Enumeration: 'blind': 3, 'coupled': 1, 'aware': 2. |
| tnEvcBandwidthProfilesCIR | 1.3.6.1.4.1.868.2.5.106.1.1.4.1.3 | integer | read-only |
The Committed Information Rate of the bandwidth profile. The allowed range is from 0 through 10,000,000 kilobit per second. |
| tnEvcBandwidthProfilesCBS | 1.3.6.1.4.1.868.2.5.106.1.1.4.1.4 | integer | read-only |
The Committed Burst Size of the bandwidth profile. The allowed range is from 0 through 100,000 bytes. |
| tnEvcBandwidthProfilesEIR | 1.3.6.1.4.1.868.2.5.106.1.1.4.1.5 | integer | read-only |
The Excess Information Rate of the bandwidth profile. The allowed range is from 0 through 10,000,000 kilobit per second. |
| tnEvcBandwidthProfilesEBS | 1.3.6.1.4.1.868.2.5.106.1.1.4.1.6 | integer | read-only |
The Excess Burst Size of the bandwidth profile. The allowed range is from 0 through 100,000 bytes. |
| tnEvcBandwidthProfilesState | 1.3.6.1.4.1.868.2.5.106.1.1.4.1.7 | integer | read-only |
The administrative state of the bandwidth profile. The allowed values are: enabled: The bandwidth profile enabled. disabled: The bandwidth profile is disabled. Enumeration: 'disabled': 2, 'enabled': 1. |
| tnEvcExtEceTable | 1.3.6.1.4.1.868.2.5.106.1.1.5 | no-access |
This table contains the configuration of EVC control entry. |
|
| 1.3.6.1.4.1.868.2.5.106.1.1.5.1 | no-access |
This entry represents an ECE. The system automatically creates an entry when the system or the EMS/NMS creates a row in the cevcECETable. Likewise, the system automatically destroys an entry when the system or the EMS/NMS destroys the corresponding row in the cevcECETable. |
||
| tnEvcEceInnerTagType | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.1 | integer | read-only |
The Inner tag type for the ECE. The possible values are: tagged: The ECE will match tagged frames only. untagged: The ECE will match untagged frames only. any: The ECE will match both tagged and untagged frames. If supported: C-Tagged: The ECE will match custom tagged frames only. S-Tagged: The ECE will match service tagged frames only. Enumeration: 's-tag': 5, 'tagged': 3, 'c-tag': 4, 'any': 1, 'untagged': 2. |
| tnEvcEceInnerTagVIDFilterType | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.2 | integer | read-only |
The Inner VLAN ID filter for matching the ECE. It only significant if tag type 'Tagged' is selected. The possible values are: any: No VLAN ID filter is specified. (VLAN ID filter status is 'don't-care'.) specific: If you want to filter a specific VLAN ID value with this ECE, choose this value. A field for entering a specific value appears. range: If you want to filter a specific VLAN ID range filter with this ECE, choose this value. A field for entering a range appears. Enumeration: 'specific': 2, 'range': 3, 'any': 1. |
| tnEvcEceInnerTagVIDFilterVal | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.3 | vlanidornone | read-only |
When 'Specific' is selected for the Inner VLAN ID filter, you can enter a specific value. The allowed value is from 0 through 4094. |
| tnEvcEceInnerTagVIDFilterStart | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.4 | vlanidornone | read-only |
When 'Range' is selected for the Inner VLAN ID filter, you can enter a specific range. The allowed range start is from 0 through 4094. |
| tnEvcEceInnerTagVIDFilterEnd | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.5 | vlanidornone | read-only |
When 'Range' is selected for the Inner VLAN ID filter, you can enter a specific range. The allowed range end is from 0 through 4094. |
| tnEvcEceInnerTagPCP | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.6 | bits | read-only |
The PCP value for matching the ECE. It only significant if tag type 'Tagged' is selected. The possible values are: any: The ECE will match any PCP value(all bits will be set to 1). specific: each bit matchs a specific PCP of ECE(from bit0 to bit7). range: The ECE will match PCP values in the selected range, valid range bit0-bit1, bit2-bit3, bit4-bit5, bit6-bit7, bit0-bit3 or bit4-bit7. Bits: 'none': 0. |
| tnEvcEceInnerTagDEI | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.7 | integer | read-only |
The DEI value for matching the ECE. It only significant if tag type 'Tagged' is selected. The allowed value is: 0, 1 or Any. Enumeration: 'dei0': 2, 'dei1': 3, 'any': 1. |
| tnEvcEcePolicer | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.8 | integer | read-only |
The ingress bandwidth profile mode for the EVC. The possible values are: Specific: The allowed range is from 1 through 128. Discard: All received frames are discarded for the EVC. The value is 4094. None: None bandwidth profile for the EVC. The value is 4095. EVC:The bandwidth profile for the specified EVC ID is used. The value is 4096. |
| tnEvcEceOuterVid | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.9 | vlanidornone | read-only |
The EVC outer tag VID for UNI ports. The allowed value is from 0 through 4094. |
| tnEvcEceNNIInnerTagType | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.10 | integer | read-only |
The inner type for the ECE determines whether an inner tag is inserted in frames forwarded to NNI ports.\ The possible values are: None: An inner tag is not inserted. C-tag: An inner C-tag is inserted. S-tag: An inner S-tag is inserted. S-custom-tag: An inner tag is inserted and the tag type is determined by the VLAN port configuration of the NNI. Enumeration: 'ctag': 1, 'none': 0, 'stag': 2, 'sctag': 3. |
| tnEvcEceInnerVid | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.11 | vlanidornone | read-only |
The inner tag VLAN ID for the ECE. The allowed range is from 0 through 4094. |
| tnEvcEceInnerPCPDEIPreserve | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.12 | integer | read-only |
The inner tag PCP and DEI preservation for the ECE. The possible values are: Preserved: The inner tag PCP and DEI is preserved. Fixed: The inner tag PCP and DEI is fixed. Enumeration: 'fixed': 2, 'preserved': 1. |
| tnEvcEceInnerPCP | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.13 | integer | read-only |
The inner tag PCP value for the ECE. The allowed range is from 0 through 7. |
| tnEvcEceInnerDEI | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.14 | integer | read-only |
The inner tag DEI value for the ECE. The allowed value is 0 or 1. |
| tnEvcEceDMacVal | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.15 | macaddress | read-write |
When 'Specific' is selected for the DMAC filter, you can enter a specific value. The legal format is 'xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx' (x is a hexadecimal digit). |
| tnEvcEceOuterPCPMode | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.16 | integer | read-write |
The outer tag PCP mode for the ECE. The possible values are: Classified: The outer tag PCP Mode is classified. Fixed: The outer tag PCP Mode is fixed. Mapped: The outer tag PCP Mode is based on mapped (QOS, DP). Enumeration: 'fixed': 2, 'classified': 1, 'mapped': 3. |
| tnEvcEceOuterDEIMode | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.17 | integer | read-write |
The outer tag DEI mode for the ECE. The possible values are: Classified: The outer tag DEI mode is classified. Fixed: The outer tag DEI mode is fixed. Drop Precedence: The outer tag DEI mode is drop precedence. Enumeration: 'classified': 1, 'dropPrec': 3, 'fixed': 2. |
| tnEvcEceActRuleType | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.18 | integer | read-write |
The rule type for the ECE. The possible values are: Both: Ingress and egress rule. RX: Ingress rule. TX: Egress rule. Enumeration: 'both': 1, 'rx': 2, 'tx': 3. |
| tnEvcEceActTxLookupType | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.19 | integer | read-write |
The TX lookup for the ECE. The possible values are: VID lookup: The TX lookup is based on VID. VID-PCP: The TX lookup is based on VID and PCP. ISDX: The TX lookup is based on ISDX. Enumeration: 'isdx': 3, 'vidLookup': 1, 'vidPCP': 2. |
| tnEvcEceActDropPrecType | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.20 | integer | read-write |
The drop precedence for the ECE. The allowed range is 0, 1 or disabled. Enumeration: 'disabled': 3, 'dp1': 2, 'dp0': 1. |
| tnEvcEceInnerPcpMode | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.21 | integer | read-write |
The inner tag PCP mode for the ECE. The possible values are: Classified: The inner tag PCP Mode is classified. Fixed: The inner tag PCP Mode is classified. Mapped: The inner tag PCP Mode is based on mapped (QOS, DP). Enumeration: 'fixed': 2, 'classified': 1, 'mapped': 3. |
| tnEvcEceIInnerDeiMode | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.22 | integer | read-write |
The inner tag DEI mode for the ECE. The possible values are: Classified: The inner tag DEI mode is classified. Fixed: The inner tag DEI mode is fixed. Drop Precedence: The inner tag DEI mode is drop precedence. Enumeration: 'dropPrecedence': 3, 'classified': 1, 'fixed': 2. |
| tnEvcEceIpv4DipFilter | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.23 | integer | read-write |
The destination IP address for matching the ECE. The possible values are: Any: No DIP filter is specified. (DIP filter status is 'don't-care'.) Host: If you want to filter a specific host address with this ECE, choose this value. A field for entering a host address appears. Network: If you want to filter a specific network address with this ECE, choose this value. A Two fields for entering a specific network address and network mask appears. Enumeration: 'host': 2, 'any': 1, 'network': 3. |
| tnEvcEceIpv4DipAddr | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.24 | inetaddress | read-write |
When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific host or network address. |
| tnEvcEceIpv4DipMask | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.25 | inetaddress | read-write |
When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific network mask. |
| tnEvcEceIpv6DipFilter | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.26 | integer | read-write |
The destination IP address for matching the ECE. The possible values are: Any: No DIP filter is specified. (DIP filter status is 'don't-care'.) Host: If you want to filter a specific host address with this ECE, choose this value. A field for entering a host address appears. Network: If you want to filter a specific network address with this ECE, choose this value. A Two fields for entering a specific network address and network mask appears. Enumeration: 'host': 2, 'any': 1, 'network': 3. |
| tnEvcEceIpv6DipAddr | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.27 | unsigned32 | read-write |
When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific host or network address. |
| tnEvcEceIpv6DipMask | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.28 | unsigned32 | read-write |
When 'Host' or 'Network' is selected for the DIP filter, you can enter a specific network mask. |
| tnEvcEceLookup | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.29 | integer | read-write |
The looup type for matching the ECE. The allowed values are: Basic: First lookup for basic classification. Advanced: Second lookup for advanced classification. Enumeration: 'advanced': 2, 'basic': 1. |
| tnEvcEceEtypeFilter | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.30 | integer | read-write |
The Ethernet type value for matching the ECE. The possible values are: Any: No Ethernet type value filter is specified. (Ethernet type filter status is 'don't-care'.) Specific: If you want to filter a specific Ethernet type value with this ECE, choose this value. Enumeration: 'specific': 2, 'any': 1. |
| tnEvcEceEtypeValue | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.31 | unsigned32 | read-write |
When 'Specific' is selected for the Ethernet type filter, you can enter a specific value. The allowed value is from 0x600 through 0xFFFF but exclude 0x0800(IPv4), 0x806(ARP) and 0x86DD(IPv6). |
| tnEvcEceEtypeDataFilter | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.32 | integer | read-write |
The Ethernet type data for matching the ECE. The possible values are: Any: No Ethernet type data filter is specified. (Ethernet type filter status is 'don't-care'.) Specific: If you want to filter a specific Ethernet type value with this ECE, choose this value. Enumeration: 'specific': 2, 'any': 1. |
| tnEvcEceEtypeData | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.33 | unsigned32 | read-write |
When 'Specific' is selected for the Ethernet type filter, you can enter a specific value. The allowed value is from 0x600 through 0xFFFF but exclude 0x0800(IPv4), 0x806(ARP) and 0x86DD(IPv6). |
| tnEvcEceEtypeDataMask | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.34 | unsigned32 | read-write |
When 'Specific' is selected for the Ethernet type data filter, you can enter a specific value. It is a pair of the Ethernet type data and its mask. The allowed value is from 0x0 through 0xFFFF. |
| tnEvcEceLlcDSAPFilter | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.35 | integer | read-write |
The LLC DSAP for matching the ECE. The possible values are: Any: No LLC DSAP value filter is specified. (LLC DSAP filter status is 'don't-care'.) Specific: If you want to filter a specific LLC DSAP value with this ECE, choose this value. Enumeration: 'specific': 2, 'any': 1. |
| tnEvcEceLlcDSAPValue | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.36 | unsigned32 | read-write |
When 'Specific' is selected for the LLC DSAP filter, you can enter a specific value. The allowed value is from 0x0 through 0xFF |
| tnEvcEceLlcSSAPFilter | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.37 | integer | read-write |
The LLC SSAP for matching the ECE. The possible values are: Any: No LLC SSAP value filter is specified. (LLC SSAP filter status is 'don't-care'.) Specific: If you want to filter a specific LLC SSAP value with this ECE, choose this value. Enumeration: 'specific': 2, 'any': 1. |
| tnEvcEceLlcSSAPValue | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.38 | unsigned32 | read-write |
When 'Specific' is selected for the LLC SSAP filter, you can enter a specific value. The allowed value is from 0x0 through 0xFF. |
| tnEvcEceLlcCtrlFilter | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.39 | integer | read-write |
The LLC control for matching the ECE. The possible values are: Any: No LLC control value filter is specified. (LLC control filter status is 'don't-care'.) Specific: If you want to filter a specific LLC control value with this ECE, choose this value. Enumeration: 'specific': 2, 'any': 1. |
| tnEvcEceLlcCtrlValue | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.40 | unsigned32 | read-write |
When 'Specific' is selected for the LLC control filter, you can enter a specific value. The allowed value is from 0x0 through 0xFF. |
| tnEvcEceLlcDataFilter | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.41 | integer | read-write |
The LLC data for matching the ECE. The possible values are: Any: No LLC data filter is specified. (LLC filter status is 'don't-care'.) Specific: If you want to filter a specific LLC value with this ECE, choose this value. Enumeration: 'specific': 2, 'any': 1. |
| tnEvcEceLlcDataValue | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.42 | unsigned32 | read-write |
When 'Specific' is selected for the LLC data filter, you can enter a specific value. It is a pair of the LLC data and its mask. The allowed value is from 0x0 through 0xFFFF. |
| tnEvcEceLlcDataMask | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.43 | unsigned32 | read-write |
When 'Specific' is selected for the LLC data filter, you can enter a specific mask. The allowed value is from 0x0 through 0xFFFF. |
| tnEvcEceSnapOuiFilter | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.44 | integer | read-write |
The SNAP OUI for matching the ECE. The possible values are: Any: No SNAP OUI value filter is specified. (SNAP OUI filter status is 'don't-care'.) Specific: If you want to filter a specific SNAP OUI value with this ECE, choose this value. Enumeration: 'specific': 2, 'any': 1. |
| tnEvcEceSnapOuiValue | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.45 | unsigned32 | read-write |
When 'Specific' is selected for the SNAP OUI filter, you can enter a specific value. The allowed value is from 00-00-00 through FF-FF-FF. |
| tnEvcEceSnapPidFilter | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.46 | integer | read-write |
The SNAP PID for matching the ECE. The possible values are: Any: No SNAP PID value filter is specified. (SNAP PID filter status is 'don't-care'.) Specific: If you want to filter a specific SNAP PID value with this ECE, choose this value. Enumeration: 'specific': 2, 'any': 1. |
| tnEvcEceSnapPidValue | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.47 | unsigned32 | read-write |
When 'Specific' is selected for the SNAP PID filter, you can enter a specific value. The allowed value is from 0x0 through 0xFFFF. |
| tnEvcEceL2cpProtoType | 1.3.6.1.4.1.868.2.5.106.1.1.5.1.48 | integer | read-write |
The L2CP type for the ECE. The possible values are: STP/RSTP/MSTP: Match STP/RSTP/MSTP frames. Pause: Match Pause frames. LACP: Match LACP frames. LAMP: Match LAMP frames. Link OAM(802.1ah): Match Link OAM(802.1ah) frames. Port Authentication(802.1x): Match Port Authentication(802.1x) frames. E-LMI: Match PB Group Address frames. PB Group Address: Match PB Group Address frames. PB GVRP: Match PB GVRP frames. LLDP: Match LLDP frames. GMRP: Match GMRP frames. GVRP: Match GVRP frames. ULD: Match ULD frames. PAgP: Match PAgP frames. PVST/PVST+: Match PVST/PVST+ frames. Cisco BPDU: Match Cisco BPDU frames. CDP: Match CDP frames. VTP: Match VTP frames. DTP: Match DTP frames. STP Uplink Fast: Match STP Uplink Fast frames. Cisco CFM: Match Cisco CFM frames. Enumeration: 'lldp': 10, 'elmi': 7, 'stpUplinkFast': 20, 'pause': 2, 'gvrp': 12, 'pbGvrp': 9, 'pagp': 14, 'pbGroupAddr': 8, 'ciscoBpd': 16, 'stpRstpMstp': 1, 'lacp': 3, 'vtp': 18, 'lamp': 4, 'cdp': 17, 'linkOam': 5, 'ciscoCfm': 21, 'portAuth8021x': 6, 'gmrp': 11, 'dtp': 19, 'pvstPvstP': 15, 'uld': 13. |
| tnEvcStatGroup | 1.3.6.1.4.1.868.2.5.106.1.2 | |||
| tnEvcStatTable | 1.3.6.1.4.1.868.2.5.106.1.2.1 | no-access |
This table provides NNI port traffic statistics for the selected EVC. It also shows counters for UNI ports of ECEs mapping to the EVC. |
|
| 1.3.6.1.4.1.868.2.5.106.1.2.1.1 | no-access |
This entry represents an entry of EVC statistics. |
||
| tnEvcStatClass | 1.3.6.1.4.1.868.2.5.106.1.2.1.1.1 | integer | no-access |
The traffic class for the EVC. |
| tnEvcStatGreenFrameRx | 1.3.6.1.4.1.868.2.5.106.1.2.1.1.2 | counter64 | read-only |
The number of green received. |
| tnEvcStatGreenFrameTx | 1.3.6.1.4.1.868.2.5.106.1.2.1.1.3 | counter64 | read-only |
The number of green transmitted. |
| tnEvcStatYellowFrameRx | 1.3.6.1.4.1.868.2.5.106.1.2.1.1.4 | counter64 | read-only |
The number of yellow received. |
| tnEvcStatYellowFrameTx | 1.3.6.1.4.1.868.2.5.106.1.2.1.1.5 | counter64 | read-only |
The number of yellow transmitted. |
| tnEvcStatRedFrameRx | 1.3.6.1.4.1.868.2.5.106.1.2.1.1.6 | counter64 | read-only |
The number of red received. |
| tnEvcStatDiscardGreenFrame | 1.3.6.1.4.1.868.2.5.106.1.2.1.1.7 | counter64 | read-only |
The number of discarded in the green color. |
| tnEvcStatDiscardYellowFrame | 1.3.6.1.4.1.868.2.5.106.1.2.1.1.8 | counter64 | read-only |
The number of discarded in the yellow color. |
| tnEvcStatClear | 1.3.6.1.4.1.868.2.5.106.1.2.1.1.9 | truthvalue | read-write |
Clears the counters for selected ports when the value of tnEvcStatClear is true. |
| tnEvcExtStatTable | 1.3.6.1.4.1.868.2.5.106.1.2.2 | no-access |
This table provides port traffic statistics for the selected EVC. It also shows counters for UNI ports of ECEs mapping to the EVC. |
|
| 1.3.6.1.4.1.868.2.5.106.1.2.2.1 | no-access |
This entry represents an entry of EVC statistics. |
||
| tnEvcExtStatType | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.1 | integer | no-access |
The traffic class for the EVC. Enumeration: 'ece': 2, 'evc': 1. |
| tnEvcExtStatIndex | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.2 | integer | no-access |
The EVC or ECE index. |
| tnEvcExtStatPort | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.3 | integer | no-access |
The EVC or ECE index. |
| tnEvcExtStatGreenFrameRx | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.4 | counter64 | read-only |
The number Frames of green received. |
| tnEvcExtStatGreenFrameTx | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.5 | counter64 | read-only |
The number Frames of green transmitted. |
| tnEvcExtStatGreenBytesRx | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.6 | counter64 | read-only |
The number Bytes of green received. |
| tnEvcExtStatGreenBytesTx | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.7 | counter64 | read-only |
The number Bytes of green transmitted. |
| tnEvcExtStatYellowFrameRx | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.8 | counter64 | read-only |
The number Frames of yellow received. |
| tnEvcExtStatYellowFrameTx | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.9 | counter64 | read-only |
The number Frames of yellow transmitted. |
| tnEvcExtStatYellowBytesRx | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.10 | counter64 | read-only |
The number Bytes of yellow received. |
| tnEvcExtStatYellowBytesTx | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.11 | counter64 | read-only |
The number Bytes of yellow transmitted. |
| tnEvcExtStatRedFrameRx | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.12 | counter64 | read-only |
The number Frames of red received. |
| tnEvcExtStatRedBytesRx | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.13 | counter64 | read-only |
The number Bytes of red received. |
| tnEvcExtStatDiscardFrameRx | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.14 | counter64 | read-only |
The number Frames of discarded received. |
| tnEvcExtStatDiscardFrameTx | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.15 | counter64 | read-only |
The number Frames of discarded transmitted. |
| tnEvcExtStatDiscardBytesRx | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.16 | counter64 | read-only |
The number Bytes of discarded received. |
| tnEvcExtStatDiscardBytesTx | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.17 | counter64 | read-only |
The number Bytes of discarded transmitted. |
| tnEvcExtStatclear | 1.3.6.1.4.1.868.2.5.106.1.2.2.1.18 | truthvalue | read-write |
Clear the value by EVC or ECE index. |
| tnEvcL2cpMgmtGroup | 1.3.6.1.4.1.868.2.5.106.1.3 | |||
| tnEvcL2cpCfgTable | 1.3.6.1.4.1.868.2.5.106.1.3.3 | no-access |
This table supports L2CP settings. |
|
| 1.3.6.1.4.1.868.2.5.106.1.3.3.1 | no-access |
L2CP settings table entry. |
||
| tnEvcL2cpCfgInterfaceNumber | 1.3.6.1.4.1.868.2.5.106.1.3.3.1.1 | unsigned32 | no-access |
Sets L2CP interface number. |
| tnEvcL2cpCfgIndex | 1.3.6.1.4.1.868.2.5.106.1.3.3.1.2 | unsigned32 | no-access |
Sets L2CP index number on an interface. |
| tnEvcL2cpCfgType | 1.3.6.1.4.1.868.2.5.106.1.3.3.1.3 | integer | read-only |
Sets L2CP type setting. Enumeration: 'tunnel': 2, 'discard': 1, 'peerToEvc': 5, 'peer': 3, 'passToEvc': 4. |
| tnEvcL2cpCfgMatchScope | 1.3.6.1.4.1.868.2.5.106.1.3.3.1.4 | integer | read-only |
Sets L2CP selection matching scope. Enumeration: 'destinationAddressOnly': 1, 'daPlusProtocol': 2, 'daPlusProtocolPlusSubtype': 3. |
| tnEvcL2cpCfgMacAddress | 1.3.6.1.4.1.868.2.5.106.1.3.3.1.5 | macaddress | read-only |
Sets L2CP Destination MAC address. |
| tnEvcL2cpCfgProtocol | 1.3.6.1.4.1.868.2.5.106.1.3.3.1.6 | unsigned32 | read-only |
Sets L2CP protocol. |
| tnEvcL2cpCfgSubType | 1.3.6.1.4.1.868.2.5.106.1.3.3.1.7 | unsigned32 | read-only |
Sets L2CP subtype for the protocol selected. |
| tnEvcL2cpCfgEvcName | 1.3.6.1.4.1.868.2.5.106.1.3.3.1.8 | octet string | read-only |
Sets L2CP EVC association. |
| tnEvcL2cpCfgValid | 1.3.6.1.4.1.868.2.5.106.1.3.3.1.9 | integer | read-only |
Sets L2CP valid instance. Enumeration: 'valid': 2, 'invalid': 1. |
| tnEvcL2cpCfgRowStatus | 1.3.6.1.4.1.868.2.5.106.1.3.3.1.10 | rowstatus | read-only |
The status of the row. The writable columns in a row cannot be changed if the row is active. All columns must have a valid value before a row can be activated. |
| tnEvcConformance | 1.3.6.1.4.1.868.2.5.106.1.8 | |||
| tnEvcGroups | 1.3.6.1.4.1.868.2.5.106.1.8.1 | |||
| tnEvcPortConfigGroup | 1.3.6.1.4.1.868.2.5.106.1.8.1.1 |
The collection of objects which are used to configure or describe the configuration or behavior of the S3280. |
||
| tnEvcJaguarPortConfigGroup | 1.3.6.1.4.1.868.2.5.106.1.8.1.2 |
The collection of objects which are used to configure or describe the configuration or behavior of the S4140. |
||
| tnEvcTableGroup | 1.3.6.1.4.1.868.2.5.106.1.8.1.3 |
The collection of objects which are used to configure or describe the configuration or behavior of the S4140. |
||