TIMETRA-SUBSCRIBER-MGMT-MIB: View SNMP OID List / Download MIB

This document contains the SNMP MIB module for handling subscriber management for the Alcatel-Lucent SROS series systems. Copyright 2005-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7450 ESS series systems release R5.0.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7750 SR and 7710 series systems release R5.0.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7450 ESS series systems release R6.0.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7750 SR series systems release R6.0.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7710 SR series systems release R6.0.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7450 ESS series systems release R6.1.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7750 SR series systems release R6.1.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7710 SR series systems release R6.1.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7450 ESS series systems release R7.0.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7750 SR series systems release R7.0.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7710 SR series systems release R7.0.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7450 ESS series systems release 8.0.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7750 SR series systems release 8.0.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7710 SR series systems release 8.0.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7450 ESS series systems release 9.0.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7750 SR series systems release 9.0.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7710 SR series systems release 9.0.

The compliance statement for management of HSMDA-2 for subscriber management on Alcatel-Lucent SROS series systems.

The compliance statement for management of Filter profiles in subscriber management on Alcatel-Lucent SROS series systems.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7x50 SR series systems release 10.0.

The compliance statement for TIMETRA-SUBSCRIBER-MGMT-MIB on Alcatel-Lucent 7710 SR series systems release 10.0.

The group of objects supporting management of subscriber authentication policies on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber profiles on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber profiles on release 5.0 of the Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber authentication policies on Alcatel-Lucent 7450 SR series systems.

The group of objects supporting management of subscriber authentication policies on Alcatel-Lucent 7750 SR and 7710 series systems.

The group of objects supporting management of subscriber accounting policies on Alcatel-Lucent 7450 SR series systems.

The group of objects supporting management of subscriber accounting policies on Alcatel-Lucent 7750 SR and 7710 series systems.

The group of objects supporting management of change-of-authorization notification statistics on Alcatel-Lucent SROS series systems.

The group of objects supporting management of notifications on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber authentication policies on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber accounting policies on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber profiles on release 6.0 of the Alcatel-Lucent SROS series systems.

The group of subscriber management objects supporting management of frame-based queue accounting on Alcatel-Lucent SROS series systems release 6.0.

The group of objects supporting management of BSX (Application Assurance) Subscribers on Alcatel-Lucent SROS series systems.

The group of objects supporting management HSMDA-related of subscriber profiles on release 6.0 of the Alcatel-Lucent SROS series systems.

The group of objects supporting management of notifications on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber accounting policies on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber authentication policies on Alcatel-Lucent SROS series systems.

The group of objects supporting management of change-of-authorization notification statistics on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber profiles on release 7.0 of the Alcatel-Lucent SROS series systems.

The group of objects supporting management of BSX (Application Assurance) Subscribers on Alcatel-Lucent SROS series systems.

The group of subscriber management objects supporting management of multicast Host Tracking on Alcatel-Lucent SROS series systems.

The group of subscriber management objects supporting management of custom records for radius accounting on Alcatel-Lucent SROS series systems.

The group of subscriber management objects supporting management of the credit control feature on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber authentication policies on Alcatel-Lucent SROS series systems.

The group of objects supporting management of notifications on Alcatel-Lucent SROS series systems.

The group of obsoleted objects for subscriber management on Alcatel-Lucent SROS series systems.

The group of obsoleted objects for subscriber management on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber authentication policies on Alcatel-Lucent SROS series systems in release 8.0.

The group of objects supporting credit-based filtering on Alcatel-Lucent SROS series systems.

The group of objects supporting credit-based filtering on Alcatel-Lucent SROS series systems.

Group of objects supporting IPv6 Router Advertisements for Neighbor Discovery for Group Interfaces on Alcatel-Lucent SROS series systems.

Group of objects supporting IPv6 on Alcatel-Lucent SROS series systems.

The group of subscriber management objects supporting multi-service-site extensions on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber accounting policies on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber profile feature on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber NAT (Network Address Translation) on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber profiles on release 8.0 of the Alcatel-Lucent SROS series systems.

The group of subscriber management objects supporting management of the credit control feature on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber profiles on release 9.0 of the Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber profile feature on Alcatel-Lucent SROS series systems.

The group of objects for the management of subscriber PPP on Alcatel-Lucent SROS series systems.

The group of subscriber management objects supporting management of the credit control feature on Alcatel-Lucent SROS series systems added in release 9.0.

The group of subscriber management objects supporting management of HSMDA-2 on Alcatel-Lucent SROS series systems.

The group of objects supporting management of BSX (Application Assurance) Subscribers on Alcatel-Lucent SROS series systems.

The group of subscriber management objects supporting management of multicast Host Tracking on Alcatel-Lucent SROS series systems.

The group of objects for the management of subscriber DSL Access Loop information on Alcatel-Lucent SROS series systems.

The group of objects for the management of Filter profiles. on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber authentication policies on Alcatel-Lucent SROS series systems added in release 10.0.

The group of objects for the management of L2TP subscribers on Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber profiles on release 10.0 of the Alcatel-Lucent SROS series systems.

The group of objects supporting management of subscriber accounting policies on Alcatel-Lucent SROS series systems since release 10.0.

The group of subscriber management objects supporting management of the credit control feature on Alcatel-Lucent SROS series systems added in release 10.0.

The group of subscriber management objects supporting management of the auto-generated subscriber identification feature on Alcatel-Lucent SROS series systems since release 10.0.

The group of subscriber management objects supporting management of the IPoE host linking feature on Alcatel-Lucent SROS series systems since release 10.0.

The group of objects for the management of subscriber PPP on Alcatel-Lucent SROS series systems since release 10.0.

The group of objects for the management of stateless address autoconfiguration hosts on Alcatel-Lucent SROS series systems since release 10.0.

The group of objects supporting management HSMDA-related of subscriber profiles on release 10.0 of the Alcatel-Lucent SROS series systems.

The group of obsoleted objects for subscriber management on Alcatel-Lucent SROS series systems in release 10.0.

The group of objects supporting traps for management of subscriber management on Alcatel-Lucent SROS series systems.

The group of objects supporting traps for management of subscriber management on Alcatel-Lucent SROS series systems.

The group of objects supporting traps for management of subscriber management on Alcatel-Lucent SROS series systems.

The group of objects supporting traps for management of subscriber management on Alcatel-Lucent SROS series systems.

The group of notifications that were added in release 9.0 on Alcatel-Lucent SROS series systems.

The group of notifications that were added in release 10.0 on Alcatel-Lucent SROS series systems.

The tmnxSubAuthPlcyTable allows configuration of subscriber Radius authentication policy parameters.

tmnxSubAuthPlcyEntry is an entry (conceptual row) in the tmnxSubAuthPlcyTable. Each entry represents the configuration for a RADIUS policy. Entries in this table can be created and deleted via SNMP SET operations to tmnxSubAuthPlcyRowStatus. Entries have a presumed StorageType of nonVolatile.

The value of tmnxSubAuthPlcyName specifies a specific subscriber authentication policy.

The value of tmnxSubAuthPlcyRowStatus controls the creation and deletion of rows in the table. An attempt to delete a row that is referred to in vRtrIfDHCPAuthPolicy will fail with an inconsistentValue error.

The value of tmnxSubAuthPlcyLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this Policy.

The value of tmnxSubAuthPlcyDescription specifies the user provided description of this subscriber authentication policy.

The value of tmnxSubAuthPlcyPassword specifies the password associated with the user for going to the RADIUS server. An empty string is returned on SNMP GET requests.

The value of tmnxSubAuthPlcyRadAuthRetries specifies the number of RADIUS requests towards the same RADIUS server.

The value of tmnxSubAuthPlcyRadAuthSrceAddr specifies the source address of a radius packet for subscriber authentication. It must be a valid unicast address (otherwise a wrongValue error is returned). If this object is configured with the address of the router interface (ref TIMETRA-VRTR-MIB::vRiaIpAddress) the Radius client uses it while making a request to the server. If the address is not configured or is not the address of one of the interfaces, the source address is based on the address of the Radius server. If the server address is in-band, the client uses the system ip address. If it is out-of-band, the source address is the address of the management interface (The addresses can be found in TIMETRA-VRTR-MIB::vRiaIpAddress).

The value of tmnxSubAuthPlcyRadAuthSrceAddrTp specifies the type of host address stored in tmnxSubAuthPlcyRadAuthSrceAddr.

The value of tmnxSubAuthPlcyRadAuthTimeout specifies, in seconds, between authentication request retries towards the same RADIUS server.

The value of tmnxSubAuthPlcyReAuthenticate specifies whether authentication must be re-issued when the DHCP lease timer expires. This field is only applicable for DHCP authentication.

The value of tmnxSubAuthPlcyUserNameFormat specifies how the user is represented when contacting RADIUS server.

The value of tmnxSubAuthPlcyRadAuthVRtrID specifies the virtual router instance applicable for the set of configured RADIUS servers (tmnxSubAuthPlcyRadServTable). The value of this object cannot be changed once an RADIUS server is configured for this policy. When the value is '0', both base and management router instances are matched.

The value of tmnxSubAuthPlcyAcceptAuthChange specifies whether or not the system should handle the CoA messages initiated by the RADIUS server, and provide for mid-session interval changes of policies applicable to subscriber hosts.

The value of tmnxSubAuthPlcyInclAttributes specifies what RADIUS attributes the system should include into RADIUS authentication-request messages. Bits: 'pppoeServiceName': 4, 'remoteId': 1, 'circuitId': 0, 'nasPortId': 2, 'macAddress': 7, 'calledStationId': 9, 'nasPortType': 12, 'callingStationId': 8, 'tunnelServerAttrs': 10, 'acctSessionId': 13, 'nasIdentifier': 3, 'accessLoopOptions': 6, 'dhcpOptions': 11, 'dhcpVendorClassId': 5.

The value of tmnxSubAuthPlcyRadAuthAlgorithm specifies the algorithm used to select a RADIUS server from the list of configured servers (tmnxSubAuthPlcyRadServTable). Enumeration: 'roundRobin': 2, 'direct': 1.

The value of tmnxSubAuthPlcyPppoeAccessMethod specifies the authentication method used to authenticate PPPoE towards the RADIUS server.

The value of tmnxSubAuthPlcyNasPortPfixType specifies what type of prefix will be added to the NAS-Port attribute if included in RADIUS authentication-request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxSubAuthPlcyInclAttributes.

The value of tmnxSubAuthPlcyNasPortPfixString specifies the user configurable string to be added as prefix to the NAS-Port attribute if included in RADIUS authentication-request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxSubAuthPlcyInclAttributes and tmnxSubAuthPlcyNasPortPfixType is set to 'userString'.

The value of tmnxSubAuthPlcyNasPortSfixType specifies what type of suffix will be added to the NAS-Port attribute if included in RADIUS authentication-request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxSubAuthPlcyInclAttributes.

The value of tmnxSubAuthPlcyUserNameAppend specifies what will be appended to the user-name sent to the RADIUS server. When the value is 'nothing', the user-name will be created as indicated by tmnxSubAuthPlcyUserNameFormat. When the value is 'domainName', the user-name will be created as indicated by tmnxSubAuthPlcyUserNameFormat, appended by '@' and a domain-name if returned via a lookup in the local-user-database (TIMETRA-LOCAL-USER-DB-MIB::tmnxLocUsrDbDhcpDomainName). From release 8.0R4 onwards, use 'tmnxSubAuthPlcyUserNameOp' instead; the value of this object is ignored if the value of 'tmnxSubAuthPlcyUserNameOp' is different from 'noOperation'.

The value of tmnxSubAuthPlcyFallbackAction specifies the authentication action in case no RADIUS server is available. When the value is 'deny', all hosts are denied access. When the value is 'accept', all hosts are granted access. When the value is 'userDb', the local user database identified by the value of the object tmnxSubAuthPlcyFallbackUserDb' is used for authentication. The value of this object must be set together with the value of the object tmnxSubAuthPlcyFallbackUserDb. Enumeration: 'userDb': 2, 'deny': 0, 'accept': 1.

The value of tmnxSubAuthPlcyFallbackUserDb specifies the local user database to use for authentication while no RADIUS server is availabe. This object is only relevant while the value of the object 'tmnxSubAuthPlcyFallbackAction' is equal to 'userDb'. The value of this object must be set together with the value of the object tmnxSubAuthPlcyFallbackAction.

The value of tmnxSubAuthPlcyClngStationIdType specifies what string will be put in the RADIUS Calling-Station-Id attribute if included in RADIUS authentication-request messages. This field is only applicable if the 'callingStationId' bit is set in tmnxSubAuthPlcyInclAttributes.

The value of tmnxSubAuthPlcyNasPortTypeType specifies what kind of value will be put in the RADIUS NAS-Port-Type attribute if included in RADIUS authentication-request messages. This field is only applicable if the 'nasPortType' bit is set in tmnxSubAuthPlcyInclAttributes.

The value of tmnxSubAuthPlcyNasPortTypeValue specifies what value will be put in the RADIUS NAS-Port-Type attribute if included in RADIUS authentication-request messages. This field is only applicable if the 'nasPortType' bit is set in tmnxSubAuthPlcyInclAttributes and the value of the object tmnxSubAuthPlcyNasPortTypeType is equal to 'config'.

The value of tmnxSubAuthPlcyPppUserNameOp specifies the operation to perform on the PAP/CHAP user name. When the value is 'appendDomain', the string specified by 'tmnxSubAuthPlcyPppDomain', preceded with a '@', is appended to the PAP/CHAP user name. When the value is 'stripDomain', any '@' character and all subsequent characters are removed from the PAP/CHAP user name. When the value is 'replaceDomain', all characters after a '@' delimiter are replaced with the string specified by 'tmnxSubAuthPlcyPppDomain'. When the value is 'defaultDomain', the same action is performed as with 'appendDomain', but only if the PAP/CHAP user name does not contain a domain name already.

The value of tmnxSubAuthPlcyPppDomain specifies the domain name to use with PAP/CHAP user name operations. This object is only relevant while the value of the object 'tmnxSubAuthPlcyPppUserNameOp' is equal to 'appendDomain', 'replaceDomain' or 'defaultDomain'.

The value of tmnxSubAuthPlcyRadAuthDownTime specifies the hold down time. If a RADIUS authentication server that was considered 'down' becomes responsive again, the system waits for this amount of time before it starts to address that server again.

The value of tmnxSubAuthPlcyUserNameOp specifies the operation to perform on the user name of DHCP hosts before transmitting it to the RADIUS server. When the value is 'appendDomain', the string specified by 'tmnxSubAuthPlcyDomain', preceded with a '@', is appended to the user name; if the value of 'tmnxSubAuthPlcyDomain' is empty, the domain-name string is retrieved from the local-user-database (TIMETRA-LOCAL-USER-DB-MIB::tmnxLocUsrDbDhcpDomainName) When the value is 'stripDomain', any '@' character and all subsequent characters are removed from the user name. When the value is 'replaceDomain', all characters after a '@' delimiter are replaced with the string specified by 'tmnxSubAuthPlcyDomain'. When the value is 'defaultDomain', the same action is performed as with 'appendDomain', but only if the user name does not contain a domain name already. When the value is 'noOperation', the value of 'tmnxSubAuthPlcyUserNameAppend' is considered, for backwards compatibility with release 8.0R1, 8.0R2 and 8.0R3.

The value of tmnxSubAuthPlcyDomain specifies the domain name to use with user name operations. This object is only relevant while the value of the object 'tmnxSubAuthPlcyUserNameOp' is equal to 'appendDomain', 'replaceDomain' or 'defaultDomain'.

The value of tmnxSubAuthPlcyUserNameMacFormat specifies how a MAC address is represented when contacting a RADIUS server. This is only used while the value of tmnxSubAuthPlcyUserNameFormat is equal to 'dhcpClientVendorOpts' and if the MAC address is used by default of DHCP client vendor options. Examples: 'ab:' 00:0c:f1:99:85:b8 Alcatel-Lucent SROS style 'XY-' 00-0C-F1-99-85-B8 IEEE canonical style 'mmmm.' 0002.03aa.abff Cisco style.

The value of tmnxSubAuthPlcyRadRespAttrSelect specifies if the rows in the tmnxSubRadiusAcceptTable are considered to selectively accept attributes in the authentication response messages. While the value of tmnxSubAuthPlcyRadRespAttrSelect is equal to 'false', the rows in the tmnxSubRadiusAcceptTable associated with this authentication policy are ignored, and all attributes are accepted.

The value of tmnxSubAuthPlcyRequestScriptPlcy specifies the RADIUS script policy used to change the RADIUS attributes of the outgoing Access-Request messages.

The value of tmnxSubAuthPlcyAcceptScriptPlcy specifies the RADIUS script policy used to change the RADIUS attributes of the incoming Access-Accept messages.

The value of tmnxSubAuthPlcyCoAScriptPlcy specifies the RADIUS script policy used to change the RADIUS attributes of the incoming Change-of-Authorization messages.

The value of tmnxSubAuthPlcyAcctSessionIdType specifies the accounting session ID type if included in RADIUS authentication-request messages. This field is only applicable if the 'acctSessionId' bit is set in tmnxSubAuthPlcyInclAttributes. Enumeration: 'host': 1, 'session': 2.

The tmnxSubAuthPlcyRadServTable has an entry for each RADIUS server used for subscriber authentication.

tmnxSubAuthPlcyRadServEntry is an entry (conceptual row) in the tmnxSubAuthPlcyRadServTable. Each entry represents the configuration for a RADIUS server. Entries in this table can be created and deleted via SNMP SET operations to tmnxSubAuthPlcyRadServRowStatus. Entries have a presumed StorageType of nonVolatile.

The value of tmnxSubAuthPlcyRadServPlcyName specifies a specific subscriber authentication policy in tmnxSubAuthPlcyTable to which this radius server is connected. Row creation will be denied if no policy with the same name occurs in the tmnxSubAuthPlcyTable.

The value of tmnxSubAuthPlcyRadServIndex specifies a specific radius server in the policy.

The value of tmnxSubAuthPlcyRadServRowStatus controls the creation and deletion of rows in the table.

The value of tmnxSubAuthPlcyRadLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this policy server.

The value of tmnxSubAuthPlcyRadServAddress specifies the IP address of the RADIUS server. A valid unicast IP address must be specified for row creation to succeed.

The value of tmnxSubAuthPlcyRadServAddrType specifies the type of address stored in tmnxSubAuthPlcyRadServAddress.

The value of tmnxSubAuthPlcyRadServSecret specifies the secret key associated with the RADIUS server. An empty key is not accepted on input. An empty string is however returned by the system on any GET request.

The value of tmnxSubAuthPlcyRadServAuthPort specifies the UDP port number on which to contact the RADIUS server for authentication.

The value of tmnxSubAuthPlcyRadServOperState indicates the operational state of the RADIUS server.

The value of tmnxSubAuthPlcyRadServCoAOnly specifies if this RADIUS server is restricted to sending Change-of-Authorization messages only (not authentication requests). There can be maximum 16 of these CoA-only servers associated with a single authentication policy. If the value of tmnxSubAuthPlcyRadServCoAOnly is equal to 'true', the value of tmnxSubAuthPlcyAcceptAuthChange is not considered anymore for this RADIUS server.

The value of tmnxSubAuthPlcyRadServPndRqLimit specifies the limit of the number of pending RADIUS authentication requests for this RADIUS server.

The value of tmnxSubAuthPlcyRadServOutTime indicates the accumulated time that the value of the object tmnxSubAuthPlcyRadServOperState has been equal to 'outOfService' since this row was created.

The value of tmnxSubAuthPlcyRadServOvrldTime indicates the accumulated time that the value of the object tmnxSubAuthPlcyRadServOperState has been equal to 'overloaded' since this row was created.

The tmnxSubAuthPlcyStatsTable has an entry for each subscriber authentication policy configured in the system.

Each row entry represents a collection of statistics for a subscriber authentication policy in the system. Entries cannot be created and deleted via SNMP SET operations.

The value of tmnxSubAuthPlcySuccess indicates how many subscriber messages (e.g. DHCP, PPPoE, ...) were authenticated successfully. Note that not all requests are therefore forwarded to radius. If several requests are sent in a short timeframe, only the first one is sent to radius.

The value of tmnxSubAuthPlcyReject indicates how many subscriber messages (e.g. DHCP, PPPoE, ...) were rejected by the authentication. Note that not all requests are therefore forwarded to radius. If several requests are sent in a short timeframe, only the first one is sent to radius.

The value of tmnxSubAuthPlcySuccess indicates how many subscriber messages (e.g. DHCP, PPPoE, ...) were authenticated successfully by the fallback mechanism.

The value of tmnxSubAuthPlcyReject indicates how many subscriber messages (e.g. DHCP, PPPoE, ...) were rejected by the fallback mechanism.

The value of tmnxSubAuthPlcySendFail indicates how many subscriber messages (e.g. DHCP, PPPoE, ...) failed to be sent.

The tmnxSubAuthPlcyStatsTable has an entry for each subscriber authentication policy configured in the system.

Each row entry represents a collection of statistics for a specific radius server in a subscriber authentication policy in the system. Entries cannot be created and deleted via SNMP SET operations.

The value of tmnxSubAuthPlcyRadSuccess indicates how many authentication requests were accepted by this radius server.

The value of tmnxSubAuthPlcyRadReject indicates how many authentication requests were rejected by this radius server.

The value of tmnxSubAuthPlcyRadTimeout indicates how many times this radius did not reply to an authentication request within the timeout.

The value of tmnxSubAuthPlcyRadMd5Fail indicates how many times the MD5 verification failed on a msg from this radius server.

The value of tmnxSubAuthPlcyRadPending indicates how many authentication requests are currently pending.

The value of tmnxSubAuthPlcyRadSendFail indicates how many authentication requests failed because the packet could not be sent out.

The value of tmnxSubAuthPlcyRadOvrldSendFail indicates how many authentication requests failed because the packet could not be sent out while the RADIUS server was in overload.

The tmnxSubProfileTable has an entry for each subscriber profile configured in the system.

Each row entry represents a subscriber profile configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSubProfRowStatus.

The value of tmnxSubProfName specifies the name of the subscriber profile.

The value of tmnxSubProfRowStatus controls the creation and deletion of rows in this table.

The value of tmnxSubProfLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

The value of tmnxSubProfDescription specifies the user provided description of this subscriber profile.

The value of tmnxSubProfIngQosSchedPolicy specifies the QoS ingress scheduler policy (from TIMETRA-QOS-MIB::tSchedulerPolicyTable) applicable to this subscriber profile.

The value of tmnxSubProfEgrQosSchedPolicy specifies the QoS egress scheduler policy (from TIMETRA-QOS-MIB::tSchedulerPolicyTable) applicable to this subscriber profile.

When the value of the object tmnxSubProfCollectAcctStats is true(1) the agent collects accounting statistics on this subscriber profile.

The value of the object tmnxSubProfAccountingPolicyId specifies the policy to use to collect accounting statistics on this subscriber profile. The value zero indicates that the agent should use the default accounting policy, if one exists.

The value of the object tmnxSubProfEgrAggRateLimit specifies the maximum total rate of all egress queues for this subscriber. The value '-1' means that there is no limit.

The value of tmnxSubProfRadiusAcctPolicy specifies the RADIUS accounting policy (tmnxSubAcctPlcyTable) applicable to this subscriber profile.

The value of tmnxSubProfDuplRadiusAcctPolicy specifies the RADIUS accounting policy (tmnxSubAcctPlcyTable) to be used for generating duplicate accounting information.

The value of tmnxSubProfUseDirectSLAMapAsDef specifies whether the provided SLA profile string is directly mapped to the SLA profile by default. If the value of this object is set to 'true(1)', the SLA profile string is used as the SLA profile name, when no matching tmnxSubProfSLAProfMapSLAString is found.

The value of tmnxSubProfFrameBasedAccounting specifies whether to use frame-based accounting when evaluating tmnxSubProfEgrAggRateLimit for subscriber queues. If the value is 'false', the default packet-based accounting method will be used.

The value of the object tmnxSubProfIngQosPolId specifies the SAP ingress QOS policy, where the value corresponds to TIMETRA-QOS-MIB::tSapIngressIndex. The value 1 specifies the index of the default SAP ingress qos policy. This object is obsoleted in 10.0 Release.

The value of the object tmnxSubProfEgrQosPolId specifies the SAP egress QOS policy, where the value corresponds to TIMETRA-QOS-MIB::tSapEgressIndex. The value 1 specifies the index of the default sap-egress qos policy. This object is obsoleted in 10.0 Release.

The value of the object tmnxSubProfHsmdaIngAggRateLimit specifies the maximum total rate of all ingress HSMDA queues for this subscriber. The value '-1' means that there is no limit. This object is obsoleted in 10.0 Release.

The value of the object tmnxSubProfHsmdaEgrAggRateLimit specifies the maximum total rate of all egress HSMDA queues for this subscriber. The value '-1' means that there is no limit. This object is obsoleted in 10.0 Release.

The value of tmnxSubProfHsmdaIngPackByteOff specifies the value, In bytes, of the adjustment for accounting to make to the size of each HSMDA packet on ingress. The specified value overrides the the value of tSapIngressHsmdaPacketOffset specified in the tSapIngressEntry indexed by tmnxSubProfIngQosPolId. A value of -128 indicates no override. This object is obsoleted in 10.0 Release.

The value of tmnxSubProfHsmdaEgrPackByteOff specifies the value, in bytes, of the adjustment for accounting to make to the size of each HSMDA packet on egress. The specified value overrides the the value of tSapEgressHsmdaPacketOffset specified in the tSapEgressEntry indexed by tmnxSubProfEgrQosPolId. A value of -128 indicates no override. This object is obsoleted in 10.0 Release.

The value of tmnxSubProfHostTrackingPolicy specifies the IGMP host tracking policy applicable to this subscriber profile.

The value of tmnxSubProfHostTrackingPolicy specifies whether the subscribers will use the default multi-service site of the customer associated with the port on which the subscriber is applied.

The value of tmnxSubProfIngPolicerPolicy specifies the ingress policer control policy applicable to this subscriber profile.

The value of tmnxSubProfEgrPolicerPolicy specifies the egress policer control policy applicable to this subscriber profile.

The value of tmnxSubProfNatPolicy specifies the NAT (Network Address Translation) policy of this subscriber profile .

The value of tmnxSubProfIgmpPolicy specifies the IGMP policy of this subscriber profile .

The value of tmnxSubProfEgrAvgFrameSize specifies the average frame size value to be used in the adjustment of the subscriber aggregate rate to account for the per packet variable expansion of the last mile for the specific session used by the subscriber host. The value 0 will disable the adjustments and cause the value of tmnxSubProfEgrEncapOffsetMode to be ignored. The value of tmnxSubProfEgrAvgFrameSize is only used for subscribers serviced by specific HSMDA and ignored otherwise.

The value of tmnxSubProfEgrEncapOffset specifies how the fixed packet offset will be derived. This fixed packet offset will be used in the adjustment of the subscriber aggregate rate, to account for the fixed offset and per packet variable expansion of the last mile for the specific session used by the subscriber host. The value 'none (0)' will disable the adjustments. The value 'auto (1)' will derive the fixed packet offset from the encapsulation type value signaled in the Access-loop-encapsulation sub-TLV in the Vendor-Specific PPPoE Tags or DHCP Relay Options [rfc4679].

The value of tmnxSubProfEgrEncapOffset specifies the fixed packet offset. This fixed packet offset will be used in the adjustment of the subscriber aggregate rate, to account for the fixed offset and per packet variable expansion of the last mile for the specific session used by the subscriber host. If the value of the object tmnxSubProfEgrEncapOffsetMode is equal to 'none', the offset is ignored. If the value of the object tmnxSubProfEgrEncapOffsetMode is equal to 'auto', the offset is used as a default value for automatic learning.

The value of tmnxSubProfSubMcacPolicy specifies the name of the multicast CAC policy. The multicast CAC policy applies the subscriber CAC algorithm if the channel(group) of this subscriber is part of the policy as specified in vRtrIgmpIfMcacPolicyName.

The value of the object tmnxSubProfPreference specifies its preference with respect to other subscriber profiles. The number '1' corresponds to the lowest preference. For a given subscriber, it is possible that the current subscriber profile is replaced with another one that has a higher or equal preference; the current subscriber profile will never be replaced with another one that has a lower preference.

The value of tmnxSubProfUseDirectFltrMapAsDef specifies whether the provided filter profile string is directly mapped to the filter profile by default. If the value of this object is set to 'true(1)', the filter profile string is used as the filter profile name, when no matching tmnxSPFltrProfMapFltrString is found.

The value of the object tmnxSubProfHsmda2IngQosPolId specifies the identifier of the SAP ingress QOS policy for HSMDA-2 subscribers. The value 1 specifies the index of the default SAP ingress qos policy.

The value of the object tmnxSubProfHsmda2EgrQosPolId specifies the identifier of the SAP egress QOS policy for HSMDA-2 subscribers. The value 1 specifies the index of the default sap-egress qos policy.

The value of the object tmnxSubProfHsmda2EgrAggRateLimit specifies the maximum total rate of all egress HSMDA-2 queues for this subscriber. The value '-1' means that there is no limit.

The value of tmnxSubProfHsmda2EgrQosWrrPolicy specifies the HSMDA Weighted Round Robin (WRR) scheduling policy.

The value of tmnxSubProfHsmda2EgrPackByteOff specifies the packet byte offset for addition of policing information for the policer.

The tmnxSubProfSchedOverrideTable allows overriding of ingress/egress scheduler rates on a per subscriber profile basis.

Each entry of the tmnxSubProfSchedOverrideTable describes ingress/egress scheduler rates which are overridden for the subscriber profile indicated by tmnxSubProfName. Rows can be created and deleted by the operator (tmnxSubProfSchedOvrRowStatus). Rows can only be created for existing schedulers defined in TIMETRA-QOS-MIB::tVirtualSchedulerTable.

The value of tmnxSubProfSchedOvrDirection indicates whether this row specifies ingress or egress scheduler override parameters.

The value of tmnxSubProfSchedOvrRowStatus controls the creation and deletion of rows in this table.

The value of tmnxSubProfSchedOvrLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

The value of tmnxSubProfSchedOvrPIR specifies the PIR rate in kbps allowed for this scheduler. This object is mandatory at creation time.

The value of tmnxSubProfSchedOvrCIR specifies the CIR rate in kbps allowed for this scheduler.

The value of tmnxSubProfSchedOvrSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (tmnxSubProfSchedOvrCIR) loses its meaning.

The tmnxSubProfSLAProfileMapTable has an entry for each SLA profile string to SLA profile name mapping defined under a subscriber profile configured in the system.

Each row entry represents an SLA profile string to SLA profile name mapping defined under a subscriber profile configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSubProfSLAProfMapRowStatus.

The value of tmnxSubProfSLAProfMapSLAString specifies the SLA profile string for this row.

The value of tmnxSubProfSLAProfMapRowStatus controls the creation and deletion of rows in this table.

The value of tmnxSubProfSLAProfMapLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

The value of tmnxSubProfSLAProfMapSLAProfile specifies the SLA profile name corresponding to this row.

The tmnxSLAProfileTable has an entry for each SLA (Service Level Agreement) profile defined in the system.

Each row entry represents an SLA profile configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSLAProfRowStatus.

The value of tmnxSLAProfName specifies the name of the SLA profile.

The value of tmnxSLAProfRowStatus controls the creation and deletion of rows in this table.

The value of tmnxSLAProfLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

The value of tmnxSLAProfDescription specifies the user provided description of this SLA profile.

The value of tmnxSLAProfHostLimit specifies the maximum number of hosts using this SLA profile.

The value of tmnxSLAProfRemoveOldest specifies whether the oldest subscriber host should be removed when the tmnxSLAProfHostLimit is hit.

The value of tmnxSLAProfIngQosPolId specifies the ingress QoS policy applicable to this SLA profile. The corresponding policy is defined in the TIMETRA-QOS-MIB::tSapIngressTable.

The value of tmnxSLAProfIngSharedQPolicy specifies the ingress shared queue policy (found in TIMETRA-QOS-MIB::tSharedQueuePolicyTable) applicable to this SLA profile. When the value of this object is an empty string it means that the SLA profile will use individual ingress QoS queues, instead of the shared ones.

The value of tmnxSLAProfIngUseMpointShared specifies whether the multipoint-shared queues of the shared queue policy specified by tmnxSLAProfIngSharedQPolicy are used. If no shared queue policy is specified, this object has no meaning.

The value of tmnxSLAProfIngIPFilterId specifies the ingress IP filter (from TIMETRA-FILTER-MIB::tIPFilterTable) applicable to this SLA profile.

The value of tmnxSLAProfEgrQosPolId specifies the egress QoS policy applicable to this SLA profile. The corresponding policy is defined in the TIMETRA-QOS-MIB::tSapEgressTable.

The value of tmnxSLAProfEgrIPFilterId specifies the egress IP filter (from TIMETRA-FILTER-MIB::tIPFilterTable) applicable to this SLA profile.

The value of tmnxSLAProfCreditControlPlcy specifies the Credit Control Policy used by this SLA profile. The value specified must be defined in tmnxSubApCreditControlPlcyTable

The value of tmnxSLAProfReportIngRateType specifies what rate will be reported in the L2TP RX-connect-speed attribute (AVP 38) when creating an L2TP LAC session.

The value of tmnxSLAProfReportIngRateSched specifies the scheduler to take the rate from. This object can only be set to a non-empty string if tmnxSLAProfReportIngRateType is set to 'namedScheduler'.

The value of tmnxSLAProfReportEgrRateType specifies what rate will be reported in the L2TP TX-connect-speed attribute (AVP 24) when creating an L2TP LAC session.

The value of tmnxSLAProfReportEgrRateSched specifies the scheduler to take the rate from. This object can only be set to a non-empty string if tmnxSLAProfReportEgrRateType is set to 'namedScheduler'.

The value of tmnxSLAProfEgrQosMarkingFromSap specifies which egress QoS marking rules are applied. If set to 'false', the egress Qos marking is defined in the sap-egress policy defined at SLA-profile level. If set to 'true', QoS marking rules defined in the sap-egress policy associated with the given SAP are applied.

The value of tmnxSLAProfIngIPv6FilterId specifies the ingress IPv6 filter (from TIMETRA-FILTER-MIB::tIPv6FilterTable) applicable to this SLA profile.

The value of tmnxSLAProfEgrIPv6FilterId specifies the egress IPv6 filter (from TIMETRA-FILTER-MIB::tIPv6FilterTable) applicable to this SLA profile.

The value of tmnxSLAProfEgrSchedulerType specifies the type of scheduling for queued traffic. If set to 'portScheduler (1)' the subscriber host queues will be parented to the port scheduler. If set to 'vportScheduler (2)' the subscriber host queues will be parented to a virtual port, which will be derived by performing a lookup with the subscriber host's intermediate destination id and organization string in the TIMETRA-PORT-MIB::tPortEgrVPortHostMatchTable. Enumeration: 'vportScheduler': 2, 'portScheduler': 1.

The value of tmnxSLAProfOTHttpRdrIpv4FltrId specifies the one-time HTTP redirection IP filter (from TIMETRA-FILTER-MIB::tIPFilterTable) applicable to this SLA profile.

The value of tmnxSLAProfEgrUseIngL2tpDscp specifies if the DSCP value found in the L2TP header of ingress traffic of PPP subscribers must be used to get the Forwarding Class for egress reclassification.

The tmnxSLAIngQueueOverrideTable allows overriding of ingress QoS policy queue parameters on a per SLA profile basis.

Each entry of the tmnxSLAIngQueueOverrideTable describes queue parameters which override the corresponding template queue parameters from the specified ingress QoS policy. Rows can be created and deleted by the operator (tmnxSLAIngQueueOvrRowStatus). Rows can only be created for queues that exist in table TIMETRA-QOS-MIB::tSapIngressQueueTable.

The value of tmnxSLAIngQueueOvrRowStatus controls the creation and deletion of rows in this table.

The value of tmnxSLAIngQueueOvrLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

The value of tmnxSLAIngQueueOvrPIR specifies the PIR rate in kbps allowed for this queue.

The value of tmnxSLAIngQueueOvrCIR specifies the CIR rate in kbps allowed for this queue.

The value of tmnxSLAIngQueueOvrMBS specifies the maximum amount of buffer space (in kbytes) allowed for the queue.

The value of tmnxSLAIngQueueOvrCBS specifies the amount of reserved buffer space (in kbytes) for the queue.

The value of tmnxSLAIngQueueOvrHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets.

The value of tmnxSLAIngQueueOvrMBSBytes specifies the maximum amount of buffer space (bytes) allowed for the queue.

The tmnxSLAEgrQueueOverrideTable allows overriding of egress QoS policy queue parameters on a per SLA profile basis.

Each entry of the tmnxSLAEgrQueueOverrideEntry describes queue parameters which override the corresponding template queue parameters from the specified egress QoS policy. Rows can be created and deleted by the operator (tmnxSLAEgrQueueOvrRowStatus). Rows can only be created for queues that exist in table TIMETRA-QOS-MIB::tSapEgressQueueTable.

The value of tmnxSLAEgrQueueOvrRowStatus controls the creation and deletion of rows in this table.

The value of tmnxSLAEgrQueueOvrLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

The value of tmnxSLAEgrQueueOvrPIR specifies the PIR rate in kbps allowed for this queue.

The value of tmnxSLAEgrQueueOvrCIR specifies the CIR rate in kbps allowed for this queue.

The value of tmnxSLAEgrQueueOvrMBS specifies the maximum amount of buffer space (in kbytes) allowed for the queue.

The value of tmnxSLAEgrQueueOvrCBS specifies the amount of reserved buffer space (in kbytes) for the queue.

The value of tmnxSLAEgrQueueOvrHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets.

The value of tmnxSLAEgrQueueOvrAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa. The value '-2' indicates that the value is not overridden.

The value of tmnxSLAEgrQueueOvrMBSBytes specifies the maximum amount of buffer space (in bytes) allowed for the queue.

The tmnxSubExplicitMapTable has an entry for each subscriber identification string mapping configured in the system.

Each row entry represents a subscriber identification string mapping configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSubExplicitMapRowStatus.

The value of tmnxSubExplicitMapSubIdent specifies the subscriber identification string for this row.

The value of tmnxSubExplicitMapRowStatus controls the creation and deletion of rows in this table.

The value of tmnxSubExplicitMapLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

The value of tmnxSubExplicitMapSubProfile specifies the subscriber profile corresponding to this row.

The value of tmnxSubExplicitMapSLAProfile specifies the SLA profile corresponding to this row.

The value of tmnxSubExplicitMapAlias specifies an alias for the subscriber identification string.

The value of tmnxSubExplicitMapAppProfile specifies the application profile corresponding to this row. The application profile is configured in TIMETRA-BSX-NG-MIB.mib::tmnxBsxAppProfTable.

The tmnxSubIdentPolicyTable has an entry for each subscriber identification policy configured in the system.

Each row entry represents a subscriber identification policy configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSubIPolRowStatus.

The value of tmnxSubIPolName specifies the name of the subscriber identification policy.

The value of tmnxSubIPolRowStatus controls the creation and deletion of rows in this table.

The value of tmnxSubIPolLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

The value of tmnxSubIPolDescription specifies the user provided description of this subscriber identification policy.

The value of tmnxSubIPolScript1URL specifies the URL of the primary identification script.

The value of tmnxSubIPolScript1AdminState specifies the administrative state of the primary identification script.

The value of tmnxSubIPolScript1OperState indicates the operational state of the primary identification script.

The value of tmnxSubIPolScript2URL specifies the URL of the secondary identification script.

The value of tmnxSubIPolScript2AdminState specifies the administrative state of the secondary identification script.

The value of tmnxSubIPolScript2OperState indicates the operational state of the secondary identification script.

The value of tmnxSubIPolScript3URL specifies the URL of the tertiary identification script.

The value of tmnxSubIPolScript3AdminState specifies the administrative state of the tertiary identification script.

The value of tmnxSubIPolScript3OperState indicates the operational state of the tertiary identification script.

The value of tmnxSubIPolUseDirectSubMapAsDef specifies whether the provided subscriber profile string is directly mapped to the subscriber profile name by default. If the value of this object is set to 'true(1)', the subscriber profile string is used as the subscriber profile name, when no matching tmnxSubIPolSubProfMapSubString is found.

The value of tmnxSubIPolUseDirectSLAMapAsDef specifies whether the provided SLA profile string is directly mapped to the SLA profile by default. If the value of this object is set to 'true(1)', the SLA profile string is used as the SLA profile name, when no matching tmnxSubIPolSLAProfMapSLAString is found.

The value of tmnxSubIPolUseDirectAppMapAsDef specifies whether the provided application profile string is directly mapped to the application profile by default. If the value of this object is set to 'true(1)', the application profile string is used as the application profile name, when no matching tmnxSubIPolAppProfMapAppString is found.

The value of tmnxSubIPolStringsFromOption specifies the option number in the DHCP acknowledgement packet where to take the identification strings from. If the value of this object is set to 0, the identification strings are derived using the identification scripts. If the value is set to non-0, the strings are taken directly from the specified option without using the identification scripts.

The value of tmnxSubIPolUseDirectFltrMapAsDef specifies whether the provided filter profile string is directly mapped to the filter profile by default. If the value of this object is set to 'true(1)', the filter profile string is used as the filter profile name, when no matching tmnxSubIPolFltrProfMapFltrString is found.

The value of tmnxSubIPolRejectUnknownStrings specifies if unknown subscriber strings are explicitly rejected by the system. If the value of tmnxSubIPolRejectUnknownStrings is equal to 'false', the system silently recovers using a known string that may be different from the current string used by the subscriber. If the value of tmnxSubIPolRejectUnknownStrings is equal to 'true', unknown strings are refused with an error message, and the subscriber strings are not modified.

The tmnxSubIPolSubProfileMapTable has an entry for each subscriber profile string to subscriber profile name mapping defined under a subscriber identification policy configured in the system.

Each row entry represents a subscriber profile string to subscriber profile name mapping defined under a subscriber identification policy configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSubIPolSubProfMapRowStatus.

The value of tmnxSubIPolSubProfMapSubString specifies the subscriber profile string for this row.

The value of tmnxSubIPolSubProfMapRowStatus controls the creation and deletion of rows in this table.

The value of tmnxSubIPolSubProfMapLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

The value of tmnxSubIPolSubProfMapSubProfile specifies the subscriber profile name corresponding to this row.

The tmnxSubIPolSLAProfileMapTable has an entry for each SLA profile string to SLA profile name mapping defined under a subscriber identification policy configured in the system.

Each row entry represents an SLA profile string to SLA profile name mapping defined under a subscriber identification policy configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSubIPolSLAProfMapRowStatus.

The value of tmnxSubIPolSLAProfMapSLAString specifies the SLA profile string for this row.

The value of tmnxSubIPolSLAProfMapRowStatus controls the creation and deletion of rows in this table.

The value of tmnxSubIPolSLAProfMapLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

The value of tmnxSubIPolSLAProfMapSLAProfile specifies the SLA profile name corresponding to this row.

The tmnxSubscriberInfoTable has an entry for each subscriber found in the system.

Each row entry contains information about a particular subscriber available in the system.

The value of tmnxSubInfoSubIdent specifies the subscriber identification of this subscriber.

The value of tmnxSubInfoSubProfile indicates the subscriber profile (found in tmnxSubProfileTable) used by this subscriber.

The value of tmnxSubInfoSubAncpString indicates the ancp string corresponding to this subscriber id.

The value of tmnxSubInfoNumSubProfileChanges indicates the number of times tmnxSubInfoSubProfile has changed. A high value of this object could indicate a problem with the subscriber identification policy (e.g. when two or more lease states belonging to the same subscriber evaluate to a different subscriber profile name).

The value of tmnxSubInfoIntermediateDestId indicates the intermediate destination identifier corresponding to this subscriber id.

The value of tmnxSubInfoAppProfile indicates the application profile used by this subscriber. Application profiles are in TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable

The value of tmnxSubInfoEgrSecShaper indicates the interpretation of the tmnxSubInfoIntermediateDestId object. A value 'unused', indicates that this subscriber is on a non-HSMDA MDA and the value of tmnxSubInfoIntermediateDestId is unused. A value of 'default' indicates that the default secondary shaper will be used for the subscriber. A value of 'intDestId' indicates that the value of tmnxSubInfoIntermediateDestId indicates the secondary shaper that will be used for this subscriber. Enumeration: 'unused': 0, 'default': 1, 'intDestId': 2.

The value of tmnxSubInfoMssCustId indicates the customer-id of the customer in which the multi-service-site specified in tmnxSubInfoMssName is defined.

The value of tmnxSubInfoMssName indicates the name of the multi-service-site used by this subscriber.

The value of tmnxSubInfoRadEgrAggRateLimit indicates the egress aggregate rate limit override received by RADIUS.

The value of tmnxSubInfoEgrAggRateLimit indicates the intended egress aggregate rate limit, regardless of its origin.

The value of tmnxSubInfoQos indicates the Quality of Service model associated with this subscriber. It is determined by the MDA (Media Dependent Adapter) of the subscriber hosts.

The tmnxSubHostInfoTable has an entry for each subscriber host found in the system.

Each row entry contains information about a particular subscriber host available in the system.

The value of tmnxSubHostInfoIpAddressType specifies the type of address stored in tmnxSubHostInfoIpAddress.

The value of tmnxSubHostInfoIpAddress specifies the IP address of this subscriber host.

The value of tmnxSubHostInfoMacAddress specifies the MAC address of this subscriber host.

The value of tmnxSubHostInfoSubIdent indicates the subscriber identification applicable for this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object may contain an empty string.

The value of tmnxSubHostInfoSubProfile indicates the subscriber profile (found in tmnxSubProfileTable) used by this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object will contain an empty string.

The value of tmnxSubHostInfoSLAProfile indicates the SLA profile (found in tmnxSLAProfileTable) used by this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object will contain an empty string.

The value of tmnxSubHostInfoOrigin indicates the origin of this subscriber host.

The value of tmnxSubHostInfoRetailerSvcId indicates the service ID of the retailer VPRN service to which this subscriber host belongs. When this object is non zero, the subscriber host belongs to a retailer VPRN.

The value of tmnxSubHostInfoRetailerIf indicates the interface index of the retailer VPRN interface to which this subscriber host belongs. When this object is non zero, the subscriber host belongs to a retailer VPRN.

The value of tmnxSubHostInfoFwdingState indicates the forwarding state of this subscriber host. When the value is 'outOfService', host traffic is not forwarded. When it is 'inService', host traffic is forwarded.

The value of tmnxSubHostInfoAppProfile indicates the application profile (found in TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable) used by this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object will contain an empty string.

The tmnxSubIngQosSchedStatsTable contains ingress QoS scheduler statistics about subscribers. In the descriptions below 'Pchip' refers to the Alcatel-Lucent SROS series Packet Processing chip, while 'Qchip' refers to the Alcatel-Lucent SROS series QoS Queueing Engine chip.

Each row entry contains ingress statistics about a particular subscriber QoS scheduler.

The value of tmnxSubIngQosSchedStatsName specifies the ingress QoS scheduler of this subscriber.

The value of tmnxSubIngQosSchedStatsFwdPkts indicates the number of forwarded packets, as determined by the subscriber ingress scheduler policy, offered by the Pchip to the Qchip.

The value of tmnxSubIngQosSchedStatsFwdOctets indicates the number of forwarded octets, as determined by the subscriber ingress scheduler policy, offered by the Pchip to the Qchip.

The tmnxSubEgrQosSchedStatsTable contains egress QoS scheduler statistics about subscribers. In the descriptions below 'Pchip' refers to the Alcatel-Lucent SROS series Packet Processing chip, while 'Qchip' refers to the Alcatel-Lucent SROS series QoS Queueing Engine chip.

Each row entry contains egress statistics about a particular subscriber QoS scheduler.

The value of tmnxSubEgrQosSchedStatsName specifies the egress QoS scheduler of this subscriber.

The value of tmnxSubEgrQosSchedStatsFwdPkts indicates the number of forwarded packets by the egress Qchip, as determined by the subscriber egress scheduler policy.

The value of tmnxSubEgrQosSchedStatsFwdOctets indicates the number of forwarded octets by the egress Qchip, as determined by the subscriber egress scheduler policy.

The tmnxSLAProfInstSubHostTable has an entry for each subscriber host found in the system, sorted by SLA profile instance.

Each row entry indicates a particular subscriber host available in the system.

The value of tmnxSPISubHostIpAddressType specifies the type of address stored in tmnxSPISubHostIpAddress.

The value of tmnxSPISubHostIpAddress specifies the IP address of this subscriber host.

The value of tmnxSPISubHostMacAddress indicates the MAC address of this subscriber host.

The value of tmnxSPISubHostOrigin indicates the origin of this subscriber host.

The tmnxSLAProfInstStatsTable contains basic statistics about SLA profile instances. In the descriptions below 'Pchip' refers to the Alcatel-Lucent SROS series Packet Processing chip, while 'Qchip' refers to the Alcatel-Lucent SROS series QoS Queueing Engine chip.

Each row entry contains basic statistics about a particular SLA profile instance.

The value of tmnxSPIStatsIngPchipOffHiPrioPkts indicates the number of high priority packets as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

The value of tmnxSPIStatsIngPchipOffHiPrioOctets indicates the number of high priority octets as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

The value of tmnxSPIStatsIngPchipOffLoPrioPkts indicates the number of low priority packets as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

The value of tmnxSPIStatsIngPchipOffLoPrioOctets indicates the number of low priority octets as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

The value of tmnxSPIStatsIngPchipOffUncolPkts indicates the number of uncolored packets as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

The value of tmnxSPIStatsIngPchipOffUncolOctets indicates the number of uncolored octets as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

The value of tmnxSPIStatsIngQchipDropHiPrioPkts indicates the number of high priority packets as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

The value of tmnxSPIStatsIngQchipDropHiPrioOctets indicates the number of high priority octets as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

The value of tmnxSPIStatsIngQchipDropLoPrioPkts indicates the number of low priority packets as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

The value of tmnxSPIStatsIngQchipDropLoPrioOctets indicates the number of low priority octets as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

The value of tmnxSPIStatsIngQchipFwdInProfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.

The value of tmnxSPIStatsIngQchipFwdInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.

The value of tmnxSPIStatsIngQchipFwdOutProfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.

The value of tmnxSPIStatsIngQchipFwdOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.

The value of tmnxSPIStatsEgrQchipDropInProfPkts indicates the number of in-profile packets dropped by the egress Qchip.

The value of tmnxSPIStatsEgrQchipDropInProfOctets indicates the number of in-profile octets dropped by the egress Qchip.

The value of tmnxSPIStatsEgrQchipDropOutProfPkts indicates the number of out-of-profile packets dropped by the egress Qchip.

The value of tmnxSPIStatsEgrQchipDropOutProfOctets indicates the number of out-of-profile octets dropped by the egress Qchip.

The value of tmnxSPIStatsEgrQchipFwdInProfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip.

The value of tmnxSPIStatsEgrQchipFwdInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the egress Qchip.

The value of tmnxSPIStatsEgrQchipFwdOutProfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.

The value of tmnxSPIStatsEgrQchipFwdOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.

The tmnxSLAProfInstIngQStatsTable contains ingress QoS queue statistics about SLA profile instances. In the descriptions below 'Pchip' refers to the Alcatel-Lucent SROS series Packet Processing chip, while 'Qchip' refers to the Alcatel-Lucent SROS series QoS Queueing Engine chip.

Each row entry contains ingress statistics about a particular SLA profile instance QoS queue.

The value of tmnxSPIIngQStatsQueueId specifies the index of the ingress QoS queue of this SLA profile instance.

The value of tmnxSPIIngQStatsOffHiPrioPkts indicates the number of high priority packets, as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

The value of tmnxSPIIngQStatsDropHiPrioPkts indicates the number of high priority packets, as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

The value of tmnxSPIIngQStatsOffLoPrioPkts indicates the number of low priority packets, as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

The value of tmnxSPIIngQStatsDropLoPrioPkts indicates the number of low priority packets, as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

The value of tmnxSPIIngQStatsOffHiPrioOctets indicates the number of high priority octets, as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

The value of tmnxSPIIngQStatsDropHiPrioOctets indicates the number of high priority octets, as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

The value of tmnxSPIIngQStatsOffLoPrioOctets indicates the number of low priority octets, as determined by the SLA profile ingress QoS policy, offered by the Pchip to the Qchip.

The value of tmnxSPIIngQStatsDropLoPrioOctets indicates the number of low priority octets, as determined by the SLA profile ingress QoS policy, dropped by the Qchip.

The value of tmnxSPIIngQStatsOffUncolPkts indicates the number of uncolored packets offered to the ingress Qchip.

The value of tmnxSPIIngQStatsOffUncolOctets indicates the number of uncolored octets offered to the ingress Qchip.

The value of tmnxSPIIngQStatsFwdInProfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the ingress Qchip.

The value of tmnxSPIIngQStatsFwdOutProfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the ingress Qchip.

The value of tmnxSPIIngQStatsFwdInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the ingress Qchip.

The value of tmnxSPIIngQStatsFwdOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the ingress Qchip.

The tmnxSLAProfInstEgrQStatsTable contains egress QoS queue statistics about SLA profile instances. In the descriptions below 'Pchip' refers to the Alcatel-Lucent SROS series Packet Processing chip, while 'Qchip' refers to the Alcatel-Lucent SROS series QoS Queueing Engine chip.

Each row entry contains egress statistics about a particular SLA profile instance QoS queue.

The value of tmnxSPIEgrQStatsQueueId specifies the index of the egress QoS queue of this SLA profile instance.

The value of tmnxSPIEgrQStatsFwdInProfPkts indicates the number of in-profile packets (rate below CIR) forwarded by the egress Qchip.

The value of tmnxSPIEgrQStatsDropInProfPkts indicates the number of in-profile packets discarded by the egress Qchip.

The value of tmnxSPIEgrQStatsFwdOutProfPkts indicates the number of out-of-profile packets (rate above CIR) forwarded by the egress Qchip.

The value of tmnxSPIEgrQStatsDropOutProfPkts indicates the number of out-of-profile packets discarded by the egress Qchip.

The value of tmnxSPIEgrQStatsFwdInProfOctets indicates the number of in-profile octets (rate below CIR) forwarded by the egress Qchip.

The value of tmnxSPIEgrQStatsDropInProfOctets indicates the number of in-profile octets discarded by the egress Qchip.

The value of tmnxSPIEgrQStatsFwdOutProfOctets indicates the number of out-of-profile octets (rate above CIR) forwarded by the egress Qchip.

The value of tmnxSPIEgrQStatsDropOutProfOctets indicates the number of out-of-profile octets discarded by the egress Qchip.

The tmnxSubscriberInfoModifyTable augments the tmnxSubscriberInfoTable. The table allows the operator to modify subscriber attributes including the subscriber identification name.

Each row entry contains parameters that allow to modify a subscriber attribute

The value of tmnxSubInfoModifySubIdent allows to specify a new name for this subscriber. When a SET of this object is done, with a non empty string, the system will attempt to rename the subscriber referred to by this row. If this action is successful, this row will be automatically removed by the system, and a new row will be created for the renamed subscriber. GETs and GETNEXTs on this variable return an empty string.

The tmnxSubAcctPlcyTable allows configuration of RADIUS based accounting policies.

tmnxSubAcctPlcyEntry is an entry (conceptual row) in the tmnxSubAcctPlcyTable. Each entry represents the configuration for a RADIUS accounting policy. Entries in this table can be created and deleted via SNMP SET operations to tmnxSubAcctPlcyRowStatus. Entries have a presumed StorageType of nonVolatile.

The value of tmnxSubAcctPlcyName specifies a specific subscriber RADIUS based accounting policy.

The value of tmnxSubAcctPlcyRowStatus controls the creation and deletion of rows in the table. An attempt to delete a row that is referred to will fail with an inconsistentValue error.

The value of tmnxSubAcctPlcyLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this policy.

The value of tmnxSubAcctPlcyDescription specifies the user provided description of this subscriber RADIUS based accounting policy.

The value of tmnxSubAcctPlcySessionIdFormat specifies the format for the acct-session-id attribute used in RADIUS accounting requests.

The value of tmnxSubAcctPlcyInclAttributes specifies what RADIUS attributes the system should include into RADIUS accounting messages. Note: the 'filterProfile' attribute is not supported for now. Bits: 'macAddress': 17, 'acctAuthentic': 21, 'framedIfId': 12, 'natPortRange': 19, 'acctDelayTime': 20, 'framedIpNetMask': 1, 'subscriberId': 2, 'alcAcctTriggeredReason': 26, 'callingStationId': 9, 'slaProfile': 8, 'filterProfile': 23, 'nasPortType': 18, 'nasPort': 22, 'subProfile': 7, 'calledStationId': 11, 'nasPortId': 5, 'framedIpv6Prefix': 14, 'wifiRssi': 25, 'nasIdentifier': 6, 'delegatedIpv6Prefix': 15, 'userName': 10, 'remoteId': 4, 'circuitId': 3, 'ipv6Address': 13, 'framedIpAddr': 0, 'tunnelServerAttrs': 16, 'dhcpVendorClassId': 24.

The value of tmnxSubAcctPlcyUpdateIvl specifies the interval at which accounting data of subscriber hosts will be updated. If set to 0, no intermediate updates will be sent.

The value of tmnxSubAcctPlcyServVRtrID specifies the virtual router instance applicable for the set of configured RADIUS servers (tmnxSubAcctPlcyRadServTable). The value of this object cannot be changed once an RADIUS server is configured for this policy. When the value is '0', both base and management router instances are matched.

The value of tmnxSubAcctPlcyServRetry specifies the number of RADIUS requests towards the same RADIUS server.

The value of tmnxSubAcctPlcyServSrcAddrTp specifies the type of address stored in tmnxSubAcctPlcyServSrcAddr.

The value of tmnxSubAcctPlcyServSrcAddr specifies the source address of a RADIUS packet for subscriber accounting. It must be a valid unicast address (otherwise a wrongValue error is returned). If this object is configured with the address of the router interface (ref TIMETRA-VRTR-MIB::vRiaIpAddress) the RADIUS client uses it while making a request to the server. If the address is not configured or is not the address of one of the interfaces, the source address is based on the address of the RADIUS server. If the server address is in-band, the client uses the system ip address. If it is out-of-band, the source address is the address of the management interface (the addresses can be found in TIMETRA-VRTR-MIB::vRiaIpAddress).

The value of tmnxSubAcctPlcyServTimeout specifies, in seconds, the timeout between retries towards the same RADIUS server.

The value of tmnxSubAcctPlcyServAlgorithm specifies the algorithm used to select a RADIUS server from the list of configured servers (tmnxSubAcctPlcyRadServTable). Enumeration: 'roundRobin': 2, 'direct': 1.

The value of tmnxSubAcctPlcyUseStdAcctAttrib specifies whether or not the standard accounting attributes are used. If set to 'true (1)', the standard accounting attributes are used for accounting information, instead of the vendor specific attributes.

The value of tmnxSubAcctPlcyNasPortPfixType specifies what type of prefix will be added to the NAS-Port-Id attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxSubAcctPlcyInclAttributes.

The value of tmnxSubAcctPlcyNasPortPfixString specifies the user configurable string to be added as prefix to the NAS-Port attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxSubAcctPlcyInclAttributes and tmnxSubAcctPlcyNasPortPfixType is set to 'userString'.

The value of tmnxSubAcctPlcyNasPortSfixType specifies what type of suffix will be added to the NAS-Port-Id attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortId' bit is set in tmnxSubAcctPlcyInclAttributes.

The value of tmnxSubAcctPlcyNasPortTypeType specifies what kind of value will be put in the RADIUS NAS-Port-Type attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortType' bit is set in tmnxSubAcctPlcyInclAttributes.

The value of tmnxSubAcctPlcyNasPortTypeValue specifies what value will be put in the RADIUS NAS-Port-Type attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPortType' bit is set in tmnxSubAcctPlcyInclAttributes and the value of the object tmnxSubAcctPlcyNasPortTypeType is equal to 'config'.

The value of tmnxSubAcctPlcyHostAccounting specifies whether accounting messages are sent for the host.

The value of tmnxSubAcctPlcyClngStationIdType specifies what string will be put in the RADIUS Calling-Station-Id attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'callingStationId' bit is set in tmnxSubAcctPlcyInclAttributes.

The value of tmnxSubAcctPlcyNasPortBitspec specifies what number will be put in the RADIUS NAS-Port attribute if included in RADIUS accounting-request messages. This field is only applicable if the 'nasPort' bit is set in tmnxSubAcctPlcyInclAttributes. ::= 'o' | 'i' | 's' | 'm' | 'p' | 'v' | 'c' 'c' - ATM VCI (Virtual Channel Identifier) 'i' - inner VLAN ID 'm' - MDA number 'o' - outer VLAN ID 'p' - port number 's' - slot number 'v' - ATM VPI (Virtual Path Identifier) Maximum 32 bits can be specified. If less than 32 bits are specified, the least significant bits are used and the omitted higher bits are set to zero. Example: *12o*12i*2s01 means 'the 12 least significant bits of the outer VLAN ID, followed by the 12 least significant bits of the inner VLAN ID, followed by the two least significant bits of the slot number, followed by a zero and a one-bit', stored in network order in the least significant bits: 0000ooooooooooooiiiiiiiiiiiiss01.

The value of tmnxSubAcctPlcyRequestScriptPlcy specifies the RADIUS script policy used to change the RADIUS attributes of the outgoing Accounting-Request messages.

The value of tmnxSubAcctPlcyQueueInstAcct specifies whether accounting messages are sent for the queue-instance. The queue-instance is the subscriber on High Scale MDA (HSMDA), or the SLA profile instance otherwise.

The value of tmnxSubAcctPlcySessionAcct specifies whether accounting messages are sent for the session.

The tmnxSubAcctPlcyRadServTable has an entry for each RADIUS server used for subscriber accounting.

tmnxSubAcctPlcyRadServEntry is an entry (conceptual row) in the tmnxSubAcctPlcyRadServTable. Each entry represents the configuration for a RADIUS server. Entries in this table can be created and deleted via SNMP SET operations to tmnxSubAcctPlcyRadServRowStatus. Entries have a presumed StorageType of nonVolatile.

The value of tmnxSubAcctPlcyRadServPlcyName specifies a specific subscriber accounting policy in the tmnxSubAcctPlcyTable to which this RADIUS server is connected. Row creation will be denied if no policy with the same name occurs in the tmnxSubAcctPlcyTable.

The value of tmnxSubAcctPlcyRadServIndex specifies a specific RADIUS server in the policy.

The value of tmnxSubAcctPlcyRadServRowStatus controls the creation and deletion of rows in the table.

The value tmnxSubAcctPlcyRadServLstMgtChg indicates the sysUpTime at the time of the most recent management-initiated change to this policy server.

The value of tmnxSubAcctPlcyRadServAddrType specifies the type of address stored in tmnxSubAcctPlcyRadServAddr.

The value of tmnxSubAcctPlcyRadServAddr specifies the IP address of the RADIUS server. A valid unicast IP address must be specified for row creation to succeed.

The value of tmnxSubAcctPlcyRadServSecret specifies the secret key associated with the RADIUS server. An empty key is not accepted as input. However If this object is read an empty string is returned.

The value of tmnxSubAcctPlcyRadServAcctPort specifies the UDP port number on which to contact the RADIUS server for accounting.

The value of tmnxSubAcctPlcyRadServOperState indicates the operational state of the RADIUS server.

The tmnxSubAcctPlcyStatsTable has an entry for each subscriber RADIUS accounting policy configured in the system.

Each row entry represents a collection of statistics for a subscriber RADIUS accounting policy in the system. Entries cannot be created and deleted via SNMP SET operations.

The value of tmnxSubAcctPlcyTxRequests indicates the number of accounting requests transmitted for this policy.

The value of tmnxSubAcctPlcyRxResponses indicates the number of accounting responses received for this policy.

The value of tmnxSubAcctPlcyReqTimeouts indicates the number of accounting requests which have timed out for this policy.

The value of tmnxSubAcctPlcySendRetries indicates the number of retries to a different server for a single accounting request for this policy.

The value of tmnxSubAcctPlcySendFail indicates how many accounting requests failed because the packet could not be sent out.

The tmnxSubAcctPlcyRadStatsTable has an entry for each RADIUS accounting server configured in the system.

Each row entry represents a collection of statistics for a specific RADIUS server in a subscriber accounting policy in the system. Entries cannot be created and deleted via SNMP SET operations.

The value of tmnxSubAcctPlcyRadTxRequests indicates the number of accounting requests transmitted for this server.

The value of tmnxSubAcctPlcyRadRxResponses indicates the number of accounting responses received for this server.

The value of tmnxSubAcctPlcyRadReqTimeouts indicates the number of accounting requests which have timed out for this server.

The value of tmnxSubAcctPlcyRadReqSendFail indicates the number of accounting requests failed because the packet could not be sent out.

The tmnxSubIPolAppProfileMapTable has an entry for each application profile string to application profile name mapping defined under a subscriber identification policy configured in the system.

Each row entry represents an application profile string to application profile name mapping defined under a subscriber identification policy configured in the system. Entries can be created and deleted via SNMP SET operations on the object tmnxSubIPolAppProfMapRowStatus.

The value of tmnxSubIPolAppProfMapAppString specifies the application profile string for this row.

The value of tmnxSubIPolAppProfMapRowStatus controls the creation and deletion of rows in this table.

The value of tmnxSubIPolAppProfMapLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

The value of tmnxSubIPolAppProfMapAppProfile specifies the application profile name corresponding to this row. Application profiles are configured in TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable

The value of tmnxSubHsmdaIngQueueOvrTableLC indicates the sysUpTime at the time of the last modification of tmnxSubHsmdaIngQueueOvrTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. This object is obsoleted in 10.0 Release.

The tmnxSubHsmdaIngQueueOvrTable has an entry for each Hsmda ingress queue override configured on the system. This table is obsoleted in 10.0 Release.

Each row entry represents a Hsmda ingress queue override record. Entries are created and deleted via SNMP SET operations on tmnxSubHsmdaIngQueueOvrRowStat.

The value of tmnxSubHsmdaIngQueueOvrRowStat controls the creation and deletion of rows in this table.

The value of tmnxSubHsmdaIngQueueOvrLastChgd indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

The value of tmnxSubHsmdaIngQueueOvrPIR specifies the PIR rate in kbps allowed for this Hsmda ingress queue.

The value of tmnxSubHsmdaIngQueueOvrCIR specifies the CIR rate in kbps allowed for this Hsmda ingress queue.

The value of tmnxSubHsmdaIngQueueOvrSlpPlcy specifies the slope policy that defines the RED slopes for this Hsmda ingress queue.

The value of tmnxSubHsmdaEgrQueueOvrTblLC indicates the sysUpTime at the time of the last modification of tmnxSubHsmdaEgrQueueOvrTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. This object is obsoleted in 10.0 Release.

The tmnxSubHsmdaEgrQueueOvrTable has an entry for each Hsmda egress queue override configured on the system. This table is obsoleted in 10.0 Release.

Each row entry represents a Hsmda egress queue override record. Entries are created and deleted via SNMP SET operations on tmnxSubHsmdaEgrQueueOvrRowStat.

The value of tmnxSubHsmdaEgrQueueOvrRowStat controls the creation and deletion of rows in this table.

The value of tmnxSubHsmdaEgrQueueOvrLastChgd indicates the sysUpTime at the time of the most recent management-initiated change to this table row.

The value of tmnxSubHsmdaEgrQueueOvrPIR specifies the PIR rate in kbps allowed for this Hsmda egress queue.

The value of tmnxSubHsmdaEgrQueueOvrCIR specifies the CIR rate in kbps allowed for this Hsmda egress queue.

The value of tmnxSubHsmdaEgrQueueOvrSlpPlcy specifies the slope policy that defines the RED slopes for this Hsmda egress queue.

A table that contains HSMDA subscriber statistics.

HSMDA statistics for a specific subscriber.

The value of tmnxSubHsmdaStSubPortId indicates the access port for this entry.

The value of tmnxSubHsmdaStIngOffTotalPkt indicates the total number of packets offered on ingress for this subscriber.

The value of tmnxSubHsmdaStIngOffTotalOct indicates the total number of octets offered on ingress for this subscriber.

The value of tmnxSubHsmdaStIngFwdInProfPkt indicates the number of in-profile packets forwarded by the ingress Qchip for this subscriber.

The value of tmnxSubHsmdaStIngFwdOutProfPkt indicates the number of out-of-profile packets forwarded by the ingress Qchip for this subscriber.

The value of tmnxSubHsmdaStIngFwdInProfOct indicates the number of out-of-profile octets forwarded by the ingress Qchip for this subscriber.

The value of tmnxSubHsmdaStIngFwdOutProfOct indicates the number of out-of-profile octets forwarded by the ingress Qchip for this subscriber.

The value of tmnxSubHsmdaStIngDropHiPrioPkt indicates the number of high-priority packets discarded by the ingress Qchip for this subscriber.

The value of tmnxSubHsmdaStIngDropLoPrioPkt indicates the number of low-priority packets discarded by the ingress Qchip for this subscriber.

The value of tmnxSubHsmdaStIngDropHiPrioOct indicates the number of high-priority octets discarded by the ingress Qchip for this subscriber.

The value of tmnxSubHsmdaStIngDropLoPrioOct indicates the number of low-priority octets discarded by the ingress Qchip for this subscriber.

The value of tmnxSubHsmdaStEgrFwdInProfPkt indicates the number of in-profile packets forwarded by the egress Qchip for this subscriber.

The value of tmnxSubHsmdaStEgrFwdOutProfPkt indicates the number of out-of-profile packets forwarded by the egress Qchip for this subscriber.

The value of tmnxSubHsmdaStEgrFwdInProfOct indicates the number of out-of-profile octets forwarded by the egress Qchip for this subscriber.

The value of tmnxSubHsmdaStEgrFwdOutProfOct indicates the number of out-of-profile octets forwarded by the egress Qchip for this subscriber.

The value of tmnxSubHsmdaStEgrDropInProfPkt indicates the number of high-priority packets discarded by the egress Qchip for this subscriber.

The value of tmnxSubHsmdaStEgrDropOutProfPkt indicates the number of low-priority packets discarded by the egress Qchip for this subscriber.

The value of tmnxSubHsmdaStEgrDropInProfOct indicates the number of high-priority octets discarded by the egress Qchip for this subscriber.

The value of tmnxSubHsmdaStEgrDropOutProfOct indicates the number of low-priority octets discarded by the egress Qchip for this subscriber.

The value of tmnxSubHsmdaStIngOffHiPrioPkt indicates the number of high priority packets offered by the Pchip to the Qchip for this subscriber. This is only supported for subscribers on an HSMDA-2.

The value of tmnxSubHsmdaStIngOffHiPrioPktLw indicates the lower 32-bits word of the value of tmnxSubHsmdaStIngOffHiPrioPkt.

The value of tmnxSubHsmdaStIngOffHiPrioPktHw indicates the higher 32-bits word of the value of tmnxSubHsmdaStIngOffHiPrioPkt.

The value of tmnxSubHsmdaStIngOffHiPrioOct indicates the number of high priority octets offered by the Pchip to the Qchip for this subscriber. This is only supported for subscribers on an HSMDA-2.

The value of tmnxSubHsmdaStIngOffHiPrioPktLw indicates the lower 32-bits word of the value of tmnxSubHsmdaStIngOffHiPrioOct.

The value of tmnxSubHsmdaStIngOffHiPrioPktHw indicates the higher 32-bits word of the value of tmnxSubHsmdaStIngOffHiPrioOct.

The value of tmnxSubHsmdaStIngOffLoPrioPkt indicates the number of low priority packets offered by the Pchip to the Qchip for this subscriber. This is only supported for subscribers on an HSMDA-2.

The value of tmnxSubHsmdaStIngOffHiPrioPktLw indicates the lower 32-bits word of the value of tmnxSubHsmdaStIngOffLoPrioPkt.

The value of tmnxSubHsmdaStIngOffLoPrioPktHw indicates the higher 32-bits word of the value of tmnxSubHsmdaStIngOffLoPrioPkt.

The value of tmnxSubHsmdaStIngOffLoPrioOct indicates the number of low priority octets offered by the Pchip to the Qchip for this subscriber. This is only supported for subscribers on an HSMDA-2.

The value of tmnxSubHsmdaStIngOffHiPrioPktLw indicates the lower 32-bits word of the value of tmnxSubHsmdaStIngOffLoPrioOct.

The value of tmnxSubHsmdaStIngOffLoPrioOctHw indicates the higher 32-bits word of the value of tmnxSubHsmdaStIngOffLoPrioOct.

The value of tmnxSubHsmdaStIngOffUncolPkt indicates the number of uncolored packets offered by the Pchip to the Qchip for this subscriber. This is only supported for subscribers on an HSMDA-2.

The value of tmnxSubHsmdaStIngOffUncolPktLw indicates the lower 32-bits word of the value of tmnxSubHsmdaStIngOffUncolPkt.

The value of tmnxSubHsmdaStIngOffUncolPktHw indicates the higher 32-bits word of the value of tmnxSubHsmdaStIngOffUncolPkt.

The value of tmnxSubHsmdaStIngOffUncolOct indicates the number of uncolored octets offered by the Pchip to the Qchip for this subscriber. This is only supported for subscribers on an HSMDA-2.

The value of tmnxSubHsmdaStIngOffUncolOctLw indicates the lower 32-bits word of the value of tmnxSubHsmdaStIngOffUncolOct.

The value of tmnxSubHsmdaStIngOffUncolOctHw indicates the higher 32-bits word of the value of tmnxSubHsmdaStIngOffUncolOct.

A table that contains subscriber ingress HSMDA queue statistics.

Ingress statistics about a specific subscriber's HSMDA queue.

The value of tmnxSubIngQStatsQueueId index specifies the Hsmda ingress queue for this entry.

The value of tmnxSubIngQStatsSubPortId indicates the access port for this entry.

The value of tmnxSubIngQStatsOffTotalPkts indicates the total number of packets offered for this subscriber.

The value of tmnxSubIngQStatsOffTotalOcts indicates the total number of octets offered on ingress on this subscriber.

The value of tmnxSubIngQStatsFwdInProfPkts indicates the number of in-profile packets forwarded on ingress on this subscriber.

The value of tmnxSubIngQStatsFwdOutProfPkts indicates the number of out-of-profile packets forwarded on ingress on this subscriber.

The value of tmnxSubIngQStatsFwdInProfOcts indicates the number of out-of-profile octets forwarded on ingress on this subscriber.

The value of tmnxSubIngQStatsFwdOutProfOcts indicates the number of out-of-profile octets forwarded on ingress on this subscriber.

The value of tmnxSubIngQStatsDropHiPrioPkts indicates the number of high-priority packets dropped on ingress on this subscriber.

The value of tmnxSubIngQStatsDropLoPrioPkts indicates the number of low-priority packets dropped on ingress on this subscriber.

The value of tmnxSubIngQStatsDropHiPrioOcts indicates the number of high-priority octets dropped on ingress on this subscriber.

The value of tmnxSubIngQStatsDropLoPrioOcts indicates the number of low-priority octets dropped on ingress on this subscriber.

The value of tmnxSubIngQStatsOffHiPrioPkts indicates the number of high-priority packets offered by the Pchip to the Qchip for this subscriber and this HSMDA-2 queue.

The value of tmnxSubIngQStatsOffHiPrioPktsLw indicates the lower 32-bits word of the value of tmnxSubIngQStatsOffHiPrioPkts.

The value of tmnxSubIngQStatsOffHiPrioPkts indicates the higher 32-bits word of the value of tmnxSubIngQStatsOffHiPrioPkts.

The value of tmnxSubIngQStatsOffLoPrioPkts indicates the number of low-priority packets offered by the Pchip to the Qchip for this subscriber and this HSMDA-2 queue.

The value of tmnxSubIngQStatsOffLoPrioPktsLw indicates the lower 32-bits word of the value of tmnxSubIngQStatsOffLoPrioPkts.

The value of tmnxSubIngQStatsOffLoPrioPktsHw indicates the higher 32-bits word of the value of tmnxSubIngQStatsOffLoPrioPkts.

The value of tmnxSubIngQStatsOffHiPrioOcts indicates the number of high-priority octets offered by the Pchip to the Qchip for this subscriber and this HSMDA-2 queue.

The value of tmnxSubIngQStatsOffHiPrioOctsLw indicates the lower 32-bits word of the value of tmnxSubIngQStatsOffHiPrioOcts.

The value of tmnxSubIngQStatsOffHiPrioOctsHw indicates the higher 32-bits word of the value of tmnxSubIngQStatsOffHiPrioOcts.

The value of tmnxSubIngQStatsOffLoPrioOcts indicates the number of low-priority octets offered by the Pchip to the Qchip for this subscriber and this HSMDA-2 queue.

The value of tmnxSubIngQStatsOffLoPrioOctsLw indicates the lower 32-bits word of the value of tmnxSubIngQStatsOffLoPrioOcts.

The value of tmnxSubIngQStatsOffLoPrioOctsHw indicates the higher 32-bits word of the value of tmnxSubIngQStatsOffLoPrioOcts.

The value of tmnxSubIngQStatsOffUncolPkts indicates the number of uncolored packets offered by the Pchip to the Qchip for this subscriber and this HSMDA-2 queue.

The value of tmnxSubIngQStatsOffUncolPktsLw indicates the lower 32-bits word of the value of tmnxSubIngQStatsOffUncolPkts.

The value of tmnxSubIngQStatsOffUncolPktsHw indicates the higher 32-bits word of the value of tmnxSubIngQStatsOffUncolPkts.

The value of tmnxSubIngQStatsOffUncolOcts indicates the number of uncolored octets offered by the Pchip to the Qchip for this subscriber and this HSMDA-2 queue.

The value of tmnxSubIngQStatsOffUncolOctsLw indicates the lower 32-bits word of the value of tmnxSubIngQStatsOffUncolOcts.

The value of tmnxSubIngQStatsOffUncolOctsHw indicates the higher 32-bits word of the value of tmnxSubIngQStatsOffUncolOcts.

A table that contains subscriber egress HSMDA queue statistics.

Egress statistics about a specific subscriber's HSMDA queue.

The value of tmnxSubEgrQStatsQueueId index specifies the Hsmda egress queue for this entry.

The value of tmnxSubEgrQStatsSubPortId indicates the access port for this entry.

The value of tmnxSubEgrQStatsFwdInProfPkts indicates the number of in-profile packets forwarded on egress on this subscriber.

The value of tmnxSubEgrQStatsFwdOutProfPkts indicates the number of out-of-profile packets forwarded on egress on this subscriber.

The value of tmnxSubEgrQStatsFwdInProfOcts indicates the number of out-of-profile octets forwarded on egress on this subscriber.

The value of tmnxSubEgrQStatsFwdOutProfOcts indicates the number of out-of-profile octets forwarded on egress on this subscriber.

The value of tmnxSubEgrQStatsDropInProfPkts indicates the number of high-priority packets dropped on egress on this subscriber.

The value of tmnxSubEgrQStatsDropOutProfPkts indicates the number of low-priority packets dropped on egress on this subscriber.

The value of tmnxSubEgrQStatsDropInProfOcts indicates the number of high-priority octets dropped on egress on this subscriber.

The value of tmnxSubEgrQStatsDropOutProfOcts indicates the number of low-priority octets dropped on egress on this subscriber.

A table that contains ingress HSMDA counter subscriber statistics. This table is obsoleted in 10.0 release.

Ingress statistics about a specific subscriber's HSMDA counter.

The value of tmnxSubIngOvrCntrId indicates the counter ID for the statistics.

The value of tmnxSubIngOvrCntrSubPortId indicates the access port for this entry.

The value of tmnxSubIngOvrCntrOffTotalPkts indicates the total number of packets offered on ingress on this subscriber.

The value of tmnxSubIngOvrCntrOffTotalOcts indicates the total number of octets offered on ingress on this subscriber.

The value of tmnxSubIngOvrCntrFwdInProfPkts indicates the number of in-profile packets forwarded for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

The value of tmnxSubIngOvrCntrFwdOutProfPkts indicates the number of out-of-profile packets forwarded for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

The value of tmnxSubIngOvrCntrFwdInProfOcts indicates the number of in-profile octets forwarded for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

The value of tmnxSubIngOvrCntrFwdOutProfOcts indicates the number of out-of-profile octets forwarded for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

The value of tmnxSubIngOvrCntrDropHiPrioPkts indicates the number of high-priority packets dropped for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

The value of tmnxSubIngOvrCntrDropLoPrioPkts indicates the number of low-priority packets dropped for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

The value of tmnxSubIngOvrCntrDropHiPrioOcts indicates the number of high-priority octets dropped for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

The value of tmnxSubIngOvrCntrDropLoPrioOcts indicates the number of low-priority octets dropped for the ingress counter, specified by the index tmnxSubIngOvrCntrId, on this subscriber.

A table that contains egress HSMDA counter subscriber statistics.

Egress statistics about a specific subscriber's HSMDA counter.

The value of tmnxSubEgrOvrCntrId indicates the counter ID for the statistics.

The value of tmnxSubEgrOvrCntrSubPortId indicates the access port for this entry.

The value of tmnxSubEgrOvrCntrFwdInProfPkts indicates the number of in-profile packets forwarded for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

The value of tmnxSubEgrOvrCntrFwdOutProfPkts indicates the number of out-of-profile packets forwarded for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

The value of tmnxSubEgrOvrCntrFwdInProfOcts indicates the number of in-profile octets forwarded for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

The value of tmnxSubEgrOvrCntrFwdOutProfOcts indicates the number of out-of-profile octets forwarded for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

The value of tmnxSubEgrOvrCntrDropInProfPkts indicates the number of high-priority packets dropped for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

The value of tmnxSubEgrOvrCntrDropOutProfPkts indicates the number of low-priority packets dropped for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

The value of tmnxSubEgrOvrCntrDropInProfOcts indicates the number of high-priority octets dropped for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

The value of tmnxSubEgrOvrCntrDropOutProfOcts indicates the number of low-priority octets dropped for the egress counter, specified by the index tmnxSubEgrOvrCntrId, on this subscriber.

The tmnxSubHostInfoV2Table has an entry for each subscriber host found in the system.

Each row entry contains information about a particular subscriber host available in the system.

The value of tmnxSubHostInfoV2IpAddressType specifies the type of address stored in tmnxSubHostInfoV2IpAddress.

The value of tmnxSubHostInfoV2IpAddress specifies the IP address of this subscriber host.

The value of tmnxSubHostInfoV2MacAddress specifies the MAC address of this subscriber host.

The value of tmnxSubHostInfoV2PppoeSessionId specifies the PPPoE session id of this subscriber host.

The value of tmnxSubHostInfoV2FwdingState indicates the forwarding state of this subscriber host. When the value is 'outOfService', host traffic is not forwarded. When it is 'inService', host traffic is forwarded.

The value of tmnxSubHostInfoV2Origin indicates the origin of this subscriber host.

The value of tmnxSubHostInfoV2SubIdent indicates the subscriber identification applicable for this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object may contain an empty string.

The value of tmnxSubHostInfoV2SubProfile indicates the subscriber profile (found in tmnxSubProfileTable) used by this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object will contain an empty string.

The value of tmnxSubHostInfoV2SLAProfile indicates the SLA profile (found in tmnxSLAProfileTable) used by this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object will contain an empty string.

The value of tmnxSubHostInfoV2AppProfile indicates the application profile (found in TIMETRA-BSX-NG-MIB::tmnxBsxAppProfTable) used by this subscriber host. If subscriber management is disabled for the corresponding SAP (see TIMETRA-SAP-MIB::sapSubMgmtAdminStatus), this object will contain an empty string.

The value of tmnxSubHostInfoV2RetailerSvcId indicates the service ID of the retailer VPRN service to which this subscriber host belongs. When this object is non zero, the subscriber host belongs to a retailer VPRN.

The value of tmnxSubHostInfoV2RetailerIf indicates the interface index of the retailer VPRN interface to which this subscriber host belongs. When this object is non zero, the subscriber host belongs to a retailer VPRN.

The value of tmnxSubHostInfoV2PfxLen indicates the length of the prefix stored in tmnxSubHostInfoV2IpAddress.

The value of tmnxSubHostInfoV2EgrQGrpName indicates the port access egress queue group (found in TIMETRA-PORT-MIB.mib::tPortAccEgrQGrpTable) used by this subscriber host.

The value of tmnxSubHostInfoV2EgrVPortName indicates the port access egress virtual port (found in TIMETRA-PORT-MIB.mib::tPortEgrVPortTable) used by this subscriber host.

The value of tmnxSubHostInfoV2AcctSessionId indicates the RADIUS accounting session id for this subscriber host.

The value of tmnxSubHostInfoV2AddressOrigin indicates the origin of the subscriber host address. This object is only applicable for L3 subscriber hosts. Enumeration: 'notApplicable': 0, 'ludb': 3, 'aaa': 1, 'dhcp': 2.

The value of tmnxSubHostInfoV2PppIndex indicates the index in the tmnxSubPppTable for PPP hosts. The value of tmnxSubHostInfoV2PppIndex is equal to zero for other types of hosts.

The value of tmnxSubHostInfoV2AcctMultiSessId indicates the RADIUS accounting session id of the queue-instance of this subscriber host. This is the accounting session id of the SLA profile instance on a non-hsmda or the accounting session id of the subscriber on a hsmda.

The value of tmnxSubHostInfoV2IngFilter indicates if and how for this host the ingress filter specified in the SLA-profile is overruled.

The value of tmnxSubHostInfoV2EgrFilter indicates if and how for this host the egress filter specified in the SLA-profile is overruled.

The value of tmnxSubHostInfoV2OtHttpRdrState indicates the state of One-Time HTTP redirection for this host. Enumeration: 'active': 1, 'off': 0, 'triggered': 2.

The value of tmnxSubHostInfoV2OtHttpRdrFilter indicates if and how for this host the one-time HTTP redirect filter specified in the SLA-profile is overruled.

The tmnxSLAProfInstSubHostV2Table has an entry for each subscriber host found in the system, sorted by SLA profile instance.

Each row entry indicates a particular subscriber host available in the system.

The value of tmnxSPISubHostV2IpAddressType specifies the type of address stored in tmnxSPISubHostV2IpAddress.

The value of tmnxSPISubHostV2IpAddress specifies the IP address of this subscriber host.

The value of tmnxSPISubHostV2MacAddress indicates the MAC address of this subscriber host.

The value of tmnxSPISubHostV2PppoeSessionId specifies the PPPoE session id of this subscriber host.

The value of tmnxSPISubHostV2Origin indicates the origin of this subscriber host.

The value of tmnxSPISubHostV2PfxLen indicates the length of ???.

The tmnxSubTrkPlcyTable allows configuration of subscriber IGMP Host tracking policy parameters.

tmnxSubTrkPlcyEntry is an entry (conceptual row) in the tmnxSubTrkPlcyTable. Each entry represents the configuration for an IGMP Host Tracking policy. Entries in this table can be created and deleted via SNMP SET operations to tmnxSubTrkPlcyRowStatus. Entries have a presumed StorageType of nonVolatile.

The value of tmnxSubTrkPlcyName specifies a specific subscriber IGMP Host Tracking policy.

The value of tmnxSubTrkPlcyRowStatus controls the creation and deletion of rows in the table.

The value of tmnxSubTrkPlcyLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this policy.

The value of tmnxSubTrkPlcyDescription specifies the user provided description of this subscriber IGMP Host Tracking policy.

The value of tmnxSubTrkPlcyEgrRateModType specifies the egress-rate modification that is to be applied. If set to 'namedScheduler', the scheduler as defined in tmnxSubTrkPlcyEgrRateModSched is used.

The value of tmnxSubTrkPlcyEgrRateModSched specifies the scheduler to be applied for egress rate modification. The value is only considered if tmnxSubTrkPlcyEgrRateModType is set to 'namedScheduler'.

The value of tmnxSubTrkPlcyMcRprtDestName indicates the multicast reporting destination (found in TIMETRA-MCAST-PATH-MGMT-MIB::tmnxMcPathRprtDestTable) or it can be an empty string.

The value of tmnxSubTrkPlcyMcRprtOptFields specifies what optional fields should be included into the multicast reporting messages. Bits: 'hostMac': 0, 'svcId': 2, 'sapId': 3, 'pppoeSessionId': 1.

The value of tmnxSubTrkPlcyMcRprtAdminState indicates the administrative state of the multicast reporting. When the value is 'outOfService', no multicast reports are sent. When it is 'inService', multicast reports are sent to the destination as indicated by tmnxSubTrkPlcyMcRprtDestName.

The tmnxSubTrkStatusTable has an entry for each subscriber that is associated with a host tracking policy. A subscriber is associated with a host tracking policy if the value of the object tmnxSubInfoSubProfile refers to a subscriber policy where the value of the object tmnxSubProfHostTrackingPolicy is not empty.

Each row entry represents status and statistics information about the QoS scheduler adjustments based on video viewership of this subscriber's hosts. Rows are created or removed automatically by the system.

The value of tmnxSubTrkStatusPlcyName indicates the name of the host tracking policy associated with this subscriber. An empty string indicates that no host tracking policy is associated with this subscriber.

The value of tmnxSubTrkStatusEgrRateReduction indicates the egress rate reduction to be applied for this subscriber in order to account for its video viewership.

The tmnxSubHostTrkTable shows status and statistics information about the video viewership of subscriber hosts.

Each row entry represents status information about a particular multicast stream associated with a particular subscriber host. Rows are created or removed automatically by the system. Rows are only created for a subscriber that is associated with a host tracking policy. A subscriber is associated with a host tracking policy if the value of the object tmnxSubInfoSubProfile refers to a subscriber policy where the value of the object tmnxSubProfHostTrackingPolicy is not empty

The value of tmnxSubHostTrkGrpAddrType indicates the address type of tmnxSubHostTrkGrpAddr.

The value of tmnxSubHostTrkGrpAddr indicates the multicast group address.

The value of tmnxSubHostTrkSrcAddrType indicates the address type of tmnxSubHostTrkSrcAddr.

The value of tmnxSubHostTrkSrcAddr indicates the address of the source that sends multicast traffic to the group identified by tmnxSubHostTrkGrpAddr.

The value of tmnxSubHostTrkBw indicates the bandwidth allocated to this subscriber host for this multicast stream.

The value of tmnxSubHostTrkUpTime indicates the time (in hundredths of a second) that the subscriber host identified by tmnxSubInfoSubIdent is associated with the multicast group identified by tmnxSubHostTrkGrpAddr through the multicast source identified by tmnxSubHostTrkSrcAddr.

The value of tmnxSubHostTrkExpiryTime indicates the time in seconds that this system will continue to track this host.

The tmnxSubHostSapTrkTable shows status information about the video viewership of hosts, ordered by SAP.

Each row entry represents status and statistics information about a particular host associated with a particular multicast stream. Rows are created or removed automatically by the system.

The value of tmnxSubHostSapTrkHostAddrType indicates the address type of tmnxSubHostSapTrkHostAddr.

The value of tmnxSubHostSapTrkHostAddr indicates the address of the host.

The value of tmnxSubHostSapTrkGrpAddrType indicates the address type of tmnxSubHostSapTrkGrpAddr.

The value of tmnxSubHostSapTrkGrpAddr indicates the multicast group address.

The value of tmnxSubHostSapTrkSrcAddrType indicates the address type of tmnxSubHostSapTrkSrcAddr.

The value of tmnxSubHostSapTrkSrcAddr indicates the address of the source that sends multicast traffic to the group identified by tmnxSubHostSapTrkGrpAddr.

The value of tmnxSubHostSapTrkBw indicates the bandwidth allocated to this host for this multicast stream.

The value of tmnxSubHostSapTrkUpTime indicates the time (in hundredths of a second) that the host is associated with the multicast group identified by tmnxSubHostSapTrkGrpAddr through the multicast source identified by tmnxSubHostSapTrkSrcAddr.

The value of tmnxSubHostSapTrkExpiryTime indicates the time in seconds that this system will continue to track this host.

The value of tmnxSubHostSapTrkSubIdent indicates the subscriber identification of this subscriber host. The subscriber identification is only available in case of enhanced subscriber management. In other cases, the value of tmnxSubHostSapTrkSubIdent is empty.

The tmnxSubHostGrpTrkTable shows status and statistics information about the video viewership of hosts, ordered by multicast group.

Each row entry represents status and statistics information about a particular multicast stream associated with a particular host. Rows are created or removed automatically by the system.

The value of tmnxSubHostGrpTrkGrpAddrType indicates the address type of tmnxSubHostGrpTrkGrpAddr.

The value of tmnxSubHostGrpTrkGrpAddr indicates the multicast group address.

The value of tmnxSubHostGrpTrkSrcAddrType indicates the address type of tmnxSubHostGrpTrkSrcAddr.

The value of tmnxSubHostGrpTrkSrcAddr indicates the address of the source that sends multicast traffic to the group identified by tmnxSubHostGrpTrkGrpAddr.

The value of tmnxSubHostGrpTrkHostAddrType indicates the address type of tmnxSubHostGrpTrkHostAddr.

The value of tmnxSubHostGrpTrkHostAddr indicates the address of the host.

The value of tmnxSubHostGrpTrkUpTime indicates the time (in hundredths of a second) that the host is associated with the multicast group identified by tmnxSubHostGrpTrkGrpAddr through the multicast source identified by tmnxSubHostGrpTrkSrcAddr.

The value of tmnxSubHostGrpTrkExpiryTime indicates the time in seconds that this system will continue to track this host.

The value of tmnxSubHostGrpTrkSubIdent indicates the subscriber identification of this subscriber host. The subscriber identification is only available in case of enhanced subscriber management. In other cases, the value of tmnxSubHostGrpTrkSubIdent is empty.

The tmnxSubGrpTrkTable shows status and statistics information about the video viewership of subscriber hosts.

Each row entry represents status and statistics information about a particular subscriber host associated with a particular multicast stream. Rows are created or removed automatically by the system. Rows are only created for a subscriber that is associated with a host tracking policy. A subscriber is associated with a host tracking policy if the value of the object tmnxSubInfoSubProfile refers to a subscriber policy where the value of the object tmnxSubProfHostTrackingPolicy is not empty

The value of tmnxSubGrpTrkGrpAddrType indicates the address type of tmnxSubGrpTrkGrpAddr.

The value of tmnxSubGrpTrkGrpAddr indicates the multicast group address.

The value of tmnxSubGrpTrkSrcAddrType indicates the address type of tmnxSubGrpTrkSrcAddr.

The value of tmnxSubGrpTrkSrcAddr indicates the address of the source that sends multicast traffic to the group identified by tmnxSubGrpTrkGrpAddr.

The value of tmnxSubGrpTrkBw indicates the bandwidth allocated to this subscriber host for this multicast stream.

The value of tmnxSubGrpTrkUpTime indicates the time (in hundredths of a second) that the subscriber host identified by tmnxSubInfoSubIdent is associated with the multicast group identified by tmnxSubGrpTrkGrpAddr through the multicast source identified by tmnxSubGrpTrkSrcAddr.

The value of tmnxSubGrpTrkExpiryTime indicates the time in seconds that this system will continue to track this host.

The value of tmnxSubApCustRecordLastChnge indicates the sysUpTime at the time of the last modification of tmnxSubApCustRecordTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

The Alcatel-Lucent SROS series tmnxSubApCustRecordTable augments tmnxSubAcctPlcyTable. The table allows to configure the layout and setting for a custom accounting record associated with this policy.

Defines an entry in the tmnxSubApCustRecordTable. Entries in this table are created and destroyed via SNMP Set requests to the tmnxSubAcctPlcyRowStatus object of the tmnxSubAcctPlcyTable.

The value of tmnxSubApCrLastChanged indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since the box was last initialized.

The value of tmnxSubApCrSignChangeDelta specifies the delta change (significant change) that is required for the custom record to be written to the xml file.

The value of tmnxSubApCrSignChangeQueue specifies the reference queue to which the significant change defined in tmnxSubApCrSignChangeDelta applies.

The value of tmnxSubApCrSignChangeOCntr specifies the counter-id that will be taken as reference to which the significant change defined in tmnxSubApCrSignChangeDelta applies.

The value of tmnxSubApCrSignChangeQICounters specifies the ingress counter Ids in the queue defined by tmnxSubApCrSignChangeQueue to be taken as reference to which the significant change defined in tmnxSubApCrSignChangeDelta applies. A non-zero value of this object is only allowed if the object tmnxSubApCrSignChangeQueue has a non-zero value.

The value of tmnxSubApCrSignChangeQECounters specifies the egress counter Ids in the queue defined by tmnxSubApCrSignChangeQueue to be taken as reference to which the significant change defined in tmnxSubApCrSignChangeDelta applies. A non-zero value of this object is only allowed if the object tmnxSubApCrSignChangeQueue has a non-zero value.

The value of tmnxSubApCrSignChangeOICounters specifies the ingress counter Ids in the counter-group defined by tmnxSubApCrSignChangeOCntr to be taken as reference to which the significant change defined in tmnxSubApCrSignChangeDelta applies. A non-zero value of this object is only allowed if the object tmnxSubApCrSignChangeOCntr has a non-zero value.

The value of tmnxSubApCrSignChangeOECounters specifies the egress counter Ids in the counter-group defined by tmnxSubApCrSignChangeOCntr to be taken as reference to which the significant change defined in tmnxSubApCrSignChangeDelta applies. A non-zero value of this object is only allowed if the object tmnxSubApCrSignChangeOCntr has a non-zero value.

The value of tmnxSubApCustRecQueueLastChnge indicates the sysUpTime at the time of the last modification of tmnxSubApCustRecordQueueTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

The Alcatel-Lucent SROS series tmnxSubApCustRecordQueueTable allows to create custom record queue information for a given RADIUS accounting policy. Rows can only be created for existing accounting policies (as defined in tmnxSubApTable).

Defines an entry in the tmnxSubApCustRecordQueueTable. Entries in this table are created and destroyed via SNMP Set requests.

The value of tmnxSubApCrQueueId specifies the queue-id for which counters will be collected in this custom record. The counters that will be collected are defined in tmnxSubApCrQueueICounters and tmnxSubApCrQueueECounters.

Row Status of the entry. This allows creation/deletion of rows in this table.

The value of tmnxSubApCrQueueLastChanged indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.

The value of tmnxSubApCrQueueICounters indicates the list of ingress counters that need to be collected in this custom record. At least one of the objects tmnxSubApCrQueueICounters or tmnxSubApCrQueueECounters must have a non-zero value.

The value of tmnxSubApCrQueueECounters indicates the list of egress counters that need to be collected in this custom record. At least one of the objects tmnxSubApCrQueueICounters or tmnxSubApCrQueueECounters must have a non-zero value.

The value of tmnxSubApCustRecOvrCtrLastChnge indicates the sysUpTime at the time of the last modification of tmnxSubApCrOverrideCntrTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

The Alcatel-Lucent SROS series tmnxSubApCrOverrideCntrTable allows to create custom record counter override information for a given accounting policy. Rows can only be created for existing accounting policies (as defined in tmnxSubApTable).

Defines an entry in the tmnxSubApCrOverrideCntrTable. Entries in this table are created and destroyed via SNMP Set requests.

The value of tmnxSubApCrOverrideCntrId specifies the counter group for which counters will be collected in this custom record. The counters that will be collected are defined in tmnxSubApCrOverrideCntrICounters and tmnxSubApCrOverrideCntrECounters.

Row Status of the entry. This allows creation/deletion of rows in this table.

The value of tmnxSubApCrOverrideCntrLastChngd indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.

The value of tmnxSubApCrOverrideCntrICounters indicates the list of ingress counters that need to be collected in this custom record. At least one of the objects tmnxSubApCrOverrideCntrICounters or tmnxSubApCrOverrideCntrECounters must have a non-zero value.

The value of tmnxSubApCrOverrideCntrECounters indicates the list of egress counters that need to be collected in this custom record. At least one of the objects tmnxSubApCrOverrideCntrICounters or tmnxSubApCrOverrideCntrECounters must have a non-zero value.

The value of tmnxSubApCCPlcyTableLastChnge indicates the sysUpTime at the time of the last modification of tmnxSubApCreditControlPlcyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

The Alcatel-Lucent SROS series tmnxSubApCreditControlPlcyTable allows to configure a Credit Control (CC) policy.

Defines an entry in the tmnxSubApCreditControlPlcyTable. Entries in this table are created and destroyed via SNMP Set requests.

The value of tmnxSLAProfCreditControlPolicy specifies the Credit Control Policy name

Row Status of the entry. This allows creation/deletion of rows in this table.

The value of tmnxSubCcPlcyLastChngd indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.

The value of tmnxSubCcPlcyDescription specifies a user provided description of this policy.

The value of the object tmnxSubCcPlcyDiameterPlcy specifies the Diameter policy to be used to access the Credit Control server. If set to the empty string, the RADIUS protocol is used by default.

The value of the object tmnxSubCcPlcyDefaultCategoryMap specifies the category map to be used by this Credit Control policy. The category map must be defined in tmnxSubApCategoryMapTable.

The value of the object tmnxSubCcPlcyOutOfCreditAction specifies the action to be taken when the available credit is used up. The value none(0) is not allowed for this object.

The value of the object tmnxSubCcPlcyErrorHandlingAction specifies the action to be taken when an error occurs in the CC determination.

The value of tmnxSubApCategoryMapTblLstChnge indicates the sysUpTime at the time of the last modification of tmnxSubApCategoryMapTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

The Alcatel-Lucent SROS series tmnxSubApCategoryMapTable allows to configure a Credit Conrol (CC) Category Map.

Defines an entry in the tmnxSubApCategoryMapTable. Entries in this table are created and destroyed via SNMP Set requests.

The value of tmnxSubApCMapName specifies the Category Map name

Row Status of the entry. This allows creation/deletion of rows in this table.

The value of tmnxSubApCMapLastChngd indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.

The value of tmnxSubApCMapDescription specifies a user provided description of this category map.

The value of tmnxSubApCMapCreditType specifies whether volume or time based accounting is performed.

The value of tmnxSubApCMapCreditExhstThrshld specifies the credit exhaust threshold taken into account to take action.

The value of tmnxSubApCMapActivityThreshold specifies the threshold (in Kbps) that is applied to determine whether or not activity is going on.

The value of tmnxSubApCategoryTblLstChnge indicates the sysUpTime at the time of the last modification of tmnxSubApCategoryTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

The Alcatel-Lucent SROS series tmnxSubApCategoryTable allows to configure a Credit Conrol (CC) Category.

Defines an entry in the tmnxSubApCategoryTable. Entries in this table are created and destroyed via SNMP Set requests.

The value of tmnxSubApCategoryName specifies the Category name

Row Status of the entry. This allows creation/deletion of rows in this table.

The value of tmnxSubApCategoryLastChngd indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.

The value of tmnxSubApCategoryDescription specifies a user provided description of this category.

The value of tmnxSubApCategoryIngressQueues specifies, which ingress queues are defined in this category.

The value of tmnxSubApCategoryEgressQueues specifies, which egress queues are defined in this category.

The value of tmnxSubApCategoryUseRatingGroup specifies whether or not the rating group defined in tmnxSubApCategoryRatingGroup is applicable for this category.

The value of tmnxSubApCategoryRatingGroup specifies the rating group applicable for this category. The value of this object is only considered if the object tmnxSubApCategoryUseRatingGroup is set to 'true'.

The value of tmnxSubApCategoryCTypeOverride, if different from 'none' overrides the credit-type as defined in tmnxSubApCMapCreditType.

The value of tmnxSubApCategoryDfltCrdtVolume, if different from 0, specifies the default value for the Volume credit. Low values may be rejected or increased by the system depending on the systems resources.

The value of tmnxSubApCategoryDfltCrdtVolUnit specifies the unit in which the default value for the Volume credit is expressed.

The value of tmnxSubApCategoryDfltCrdtTime, if different from 0, specifies the default value for the Time credit. Low values may be rejected or increased by the system depending on the systems resources.

The value of tmnxSubApCategoryOutOfCrdtAction, if different from none, specifies the action to be taken if the credit es exhausted. If set to none, the action as specified in tmnxSubCcPlcyOutOfCreditAction aplies. The value disconnectHost(2) is not allowed for this object.

The value of tmnxSubApCategoryPir, specifies the PIR rate overide value for this category.

The value of tmnxSubApCategoryIngressPolicers specifies, which ingress policers are defined in this category.

The value of tmnxSubApCategoryEgressPolicers specifies, which egress policers are defined in this category.

The tmnxSubTrkPlcySubscriberTable shows the subscribers associated with their IGMP Host Tracking policy.

Each row entry represents a particular subscriber associated with a particular IGMP Host Tracking policy.

The value of tmnxSubTrkPlcySubscriberId indicates the subscriber identification.

The tmnxSPICatTable contains volume & time based accounting information for active subscribers.

Each row entry contains volume & time based accounting information for a subscriber, SLA profile and credit category.

The value of tmnxSPICatName indicates the credit category.

The value of tmnxSPICatMapName indicates the credit category map.

The value of tmnxSPICatCreditControlPlcy indicates the credit control policy.

The value of tmnxSPICatCrdtVolumeUsed indicates the volume based credit used.

The value of tmnxSPICatCrdtVolumeAvail indicates the volume based credit available.

The value of tmnxSPICatCrdtVolumeThres indicates the volume based credit threshold. If tmnxSPICatCrdtVolumeAvail becomes lower, then credit negotiation will start.

The value of tmnxSPICatCrdtTimeUsed indicates the time based credit used.

The value of tmnxSPICatCrdtTimeAvail indicates the time based credit available.

The value of tmnxSPICatCrdtTimeThres indicates the time based credit threshold. If tmnxSPICatCrdtTimeAvail becomes lower, then credit negotiation will start.

The value of tmnxSPICatCrdtExpired indicates whether credit has expired.

The value of tmnxSPICatCrdtNegotiating indicates whether credit is being negotiated.

The value of tmnxSPICatOutOfCrdtAction indicates what will happen when credit gets exhausted.

The value of tmnxSPICatQuotaHoldingTime indicates the time after which credit negotiation will start when the subscriber activity rate falls below the activity threshold.

The object tmnxSPICatCrdtReset allows the operator to reset the credit for the accounting record represented by this row, by setting the object to 'doAction'. A GET on this object will always return 'notApplicable'.

The tmnxSubHostSapTrkStatsTable shows statistics information about the video viewership of hosts, ordered by SAP.

Each row entry represents host tracking status and statistics information about a particular host. Rows are created or removed automatically by the system. Rows are only created where the statistics value is nonzero; this allows faster walking through this table; hence, it is recommended to perform only get-next-request operations to retrieve information from this table.

The value of tmnxSubHostSapTrkStatsType indicates the type of host tracking statistics contained in tmnxSubHostSapTrkStatsVal.

The value of tmnxSubHostSapTrkStatsType indicates the value of the host tracking statistics of the type indicated by tmnxSubHostSapTrkStatsType, for this host.

The tmnxSubHostTrkStatsTable shows statistics information about the video viewership of subscriber hosts.

Each row entry represents host tracking statistics information about a particular subscriber host. Rows are created or removed automatically by the system. Rows are only created for a subscriber that is associated with a host tracking policy. A subscriber is associated with a host tracking policy if the value of the object tmnxSubInfoSubProfile refers to a subscriber policy where the value of the object tmnxSubProfHostTrackingPolicy is not empty. Moreover, rows are only created where the statistics value is nonzero; this allows faster walking through this table; hence, it is recommended to perform only get-next-request operations to retrieve information from this table.

The value of tmnxSubHostTrkStatsType indicates the type of host tracking statistics contained in tmnxSubHostTrkStatsVal.

The value of tmnxSubHostTrkStatsType indicates the value of the host tracking statistics of the type indicated by tmnxSubHostTrkStatsType, for this subscriber host.

The tmnxSLAProfInstInfoTable has an entry for each SLA profile instance found in the system.

Each row entry contains information about a particular SLA profile instance available in the system.

The value of tmnxSPIInfoCategoryMapName indicates the name of the category map used by this SLA profile instance.

The value of tmnxSPIInfoDiamSessId indicates the id of the diameter session used by this SLA profile instance.

The value of tmnxCcIpFltrTableLastChange indicates the sysUpTime at the time of the last modification of tmnxSubCredCatIpFltrTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.

A table of all IP filter entries for all credit control (CC) Categories.

Information about a particular Credit Control (CC) Category IP Filter entry. Every Credit Control (CC) Category can have zero or more IP Filter entries.

The value of tmnxCcIpFltrDirection serves as a primary index for the IP-filter entry and indicates whether this entry applies to the ingress/egress SAP.

The value of tmnxCcIpFltrIndex serves as a secondary index for the IP-filter entry.

The value of tmnxCcIpFltrRowStatus controls the creation and deletion of rows in the table. Max. 10 entries can be created for any combination of tmnxSubApCMapName,tmnxSubApCategoryName.

The value of tmnxCcIpFltrLastChanged indicates the sysUpTime when an object in this table was last modified. A Value 0 means that no change was made to this row since it was created.

The value of tmnxCcIpFltrDescription specifies the user-provided description for this filter entry.

The value of tmnxCcIpFltrAction specifies the action to take for packets that match this filter entry. The default value of 'drop(1)' will drop all matching packets. The value nat(5) is not supported.

The value of tmnxCcIpFltrRedirectURL specifies the URL to redirect to, when the value of tmnxCcIpFltrAction is 'httpRedirect'.

The value of tmnxCcIpFltrProtocol specifies the IP protocol to match. If the protocol is changed the protocol specific parameters are reset. For instance if protocol is changed from TCP to UDP, then the objects tmnxCcIpFltrTcpSyn and tmnxCcIpFltrTcpAck will be turned off. The default value of -1 disables matching IP protocol.

The value of tmnxCcIpFltrDSCP specifies the DSCP to be matched on the packet.

The value of tmnxCcIpFltrSourceIpAddr specifies the IP address to match the source-ip of the packet. This field can only be set if the value of tmnxCcIpFltrDirection is set to egress.

The value of tmnxCcIpFltrSourceIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Source IP address to match the tmnxCcIpFltrSourceIpAddr. The default value of 0 disables matching on the Source IP address. This field can only be set if the value of tmnxCcIpFltrDirection is set to egress.

The value of tmnxCcIpFltrDestinationIpAddr specifies the IP address to match the destination-ip of the packet. This field can only be set if the value of tmnxCcIpFltrDirection is set to ingress.

The value of tmnxCcIpFltrDestinationIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received destination IP address to match the tmnxCcIpFltrDestinationIpAddr. The default value of 0 disables matching on the destination IP address. This field can only be set if the value of tmnxCcIpFltrDirection is set to ingress.

The value of tmnxCcIpFltrSourcePortValue1 specifies the TCP/UDP port value1. The value of this object is used as per the description for tmnxCcIpFltrSourcePortOperator.

The value of tmnxCcIpFltrSourcePortValue2 specifies the TCP/UDP port value2. The value of this object is used as per the description for tmnxCcIpFltrSourcePortOperator.

The value of tmnxCcIpFltrSourcePortOperator specifies the manner in which tmnxCcIpFltrSourcePortValue1 and tmnxCcIpFltrSourcePortValue2 are to be used. The value of these latter 2 objects and tIPFilterParamsSourcePortOperator is used as described in TTcpUdpPortOperator.

The value of tmnxCcIpFltrDestPortValue1 specifies the TCP/UDP port value1. The value of this object is used as per the description for tmnxCcIpFltrDestPortOperator.

The value of tmnxCcIpFltrDestPortValue2 specifies the TCP/UDP port value2. The value of this object is used as per the description for tmnxCcIpFltrDestPortOperator.

The value of tmnxCcIpFltrDestPortOperator specifies the manner in which tmnxCcIpFltrDestPortValue1 and tmnxCcIpFltrDestPortValue2 are to be used. The value of these latter 2 objects and tmnxCcIpFltrDestPortOperator is used as described in TTcpUdpPortOperator.

The value of tmnxCcIpFltrFragment specifies whether this filter applies to fragmented or unfragmented packets only. The default value of 'off(1)' disables fragmentation matching.