TELDAT-CFG-PROTOCOL-GW104-MIB: View SNMP OID List / Download MIB

VENDOR: TELDAT, S.A.


 Home MIB: TELDAT-CFG-PROTOCOL-GW104-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, TELDAT-SW-STRUCTURE-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 telProdNpConfProtGW104 1.3.6.1.4.1.2007.4.1.1.5.14
       telProdNpGW104Global 1.3.6.1.4.1.2007.4.1.1.5.14.1
           telProdNpGW104GloEnable 1.3.6.1.4.1.2007.4.1.1.5.14.1.1 integer read-write
Enables Gateway IEC-104/101 operation. Enumeration: 'disabled': 0, 'enabled': 1.
           telProdNpGW104Glo101_On 1.3.6.1.4.1.2007.4.1.1.5.14.1.2 integer read-write
Enables IEC-101 operation regardless IEC-104 agents status. Enumeration: 'disabled': 0, 'enabled': 1.
           telProdNpGW104Glo104_On 1.3.6.1.4.1.2007.4.1.1.5.14.1.3 integer read-write
Enables IEC-104 agents operation regardless IEC-101 interfaces status. Enumeration: 'disabled': 0, 'enabled': 1.
           telProdNpGW104GloASDUComAddr 1.3.6.1.4.1.2007.4.1.1.5.14.1.4 integer read-write
Set ASDU Common Address field value.
           telProdNpGW104GloASDUComAddrSz 1.3.6.1.4.1.2007.4.1.1.5.14.1.5 integer read-write
Set ASDU Common Address field size.
           telProdNpGW104GloCauseTransfSz 1.3.6.1.4.1.2007.4.1.1.5.14.1.6 integer read-write
Set Cause of Transfer field size.
           telProdNpGW104GloInfoObjAddrSz 1.3.6.1.4.1.2007.4.1.1.5.14.1.7 integer read-write
Set Information Object Address field size.
           telProdNpGW104GloIoa10000 1.3.6.1.4.1.2007.4.1.1.5.14.1.8 integer read-write
Enable use of IOA 10000. Enumeration: 'disabled': 0, 'enabled': 1.
           telProdNpGW104GloIoa10007 1.3.6.1.4.1.2007.4.1.1.5.14.1.9 integer read-write
Enable use of IOA 10007. Enumeration: 'disabled': 0, 'enabled': 1.
           telProdNpGW104GloOrigFilter 1.3.6.1.4.1.2007.4.1.1.5.14.1.10 integer read-write
Enable originator address filter for messages received from Control Center . Enumeration: 'disabled': 0, 'enabled': 1.
       telProdNpGW104AgentTable 1.3.6.1.4.1.2007.4.1.1.5.14.2 no-access
Agents list. The table index is the Agent position.
           telProdNpGW104AgentEntry 1.3.6.1.4.1.2007.4.1.1.5.14.2.1 no-access
Each entry consists in an IEC-104 Agent. Each entry contains the corresponding IEC-104 agent configuration.
               telProdNpGW104AgentIndex 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.1 integer read-only
IEC-104 agent position in the table.
               telProdNpGW104AgentStatus 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.2 integer read-write
Table control variable. Set to 1 does nothing. Set to 2 adds a new row (IEC-104 Agent) in the table with default values and returns 2. If it already exists, then it returns error. It must be added immediately after the last index. Set to 3 deletes all table fields corresponding to that Agent, and returns 3. Get returns 1 if the control exists. Enumeration: 'add': 2, 'valid': 1, 'delete': 3.
               telProdNpGW104AgentName 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.3 displaystring read-write
IEC-104 agent name. Agents names must be different, can not be repeated. If name already exists, then it returns error.
               telProdNpGW104AgentAlarmBuf 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.4 integer read-write
Alarm buffer queue length.
               telProdNpGW104AgentK 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.5 integer read-write
Max. number of IEC-104 send messages without confirmation.
               telProdNpGW104AgentLocTcpPort 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.6 integer read-write
Local TCP port for IEC-104 agent listen.
               telProdNpGW104AgentT0 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.7 integer read-write
T0 defined by IEC-104, establish connection timeout. Value indicates in seconds.
               telProdNpGW104AgentT1 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.8 integer read-write
T1 defined by IEC-104, SEND or TEST APDU type timeout. Value indicates in seconds.
               telProdNpGW104AgentT2 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.9 integer read-write
T2 defined by IEC-104, data message confirmation timeout. Value indicates in seconds.
               telProdNpGW104AgentT3 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.10 integer read-write
T3 defined by IEC-104, sending S message timeout on long inactivity periods. Value indicates in seconds.
               telProdNpGW104AgentW 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.11 integer read-write
Max. number of IEC-104 received messages confirmed.
               telProdNpGW104AgentVrf 1.3.6.1.4.1.2007.4.1.1.5.14.2.1.12 displaystring read-write
VRF name. If VRF is configured on router, can be asociate in agent. Return error if VRF name don't exist.
       telProdNpGW104AgentCcIpTable 1.3.6.1.4.1.2007.4.1.1.5.14.3 no-access
Agents list. The table index is the Agent position.
           telProdNpGW104AgentCcIpEntry 1.3.6.1.4.1.2007.4.1.1.5.14.3.1 no-access
Each entry contains a Control Center IP address for an IEC-104 Agent. First index indicates IEC-104 Agent this value must correspond with same in Agent global parameters table. The second table index indicates the order number of that Control Center IP address inside that Agent.
               telProdNpGW104AgentCcIpAgIndex 1.3.6.1.4.1.2007.4.1.1.5.14.3.1.1 integer read-only
IEC-104 agent position index, must be the same that agents table.
               telProdNpGW104AgentCcIpIndex 1.3.6.1.4.1.2007.4.1.1.5.14.3.1.2 integer read-only
Control Center IP address position in the table.
               telProdNpGW104AgentCcIpStatus 1.3.6.1.4.1.2007.4.1.1.5.14.3.1.3 integer read-write
Table control variable. Set to 1 does nothing. Set to 2 deletes corresponding Control Center IP address to that Agent. Get returns 1 if the control exists. It returns ERROR if agent don't exist, index don't was greated. Enumeration: 'valid': 1, 'delete': 2.
               telProdNpGW104AgentCcIpAddr 1.3.6.1.4.1.2007.4.1.1.5.14.3.1.4 ipaddress read-write
Control Center IP address for IEC-104 agents filter. Adding a new IP address, that don't exist in the table, create a new row in the table.