STN-PPTP-MIB: View SNMP OID List / Download MIB

VENDOR: SPRING TIDE NETWORKS


 Home MIB: STN-PPTP-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SPRING-TIDE-NETWORKS-TC, SNMPv2-SMI, SPRING-TIDE-NETWORKS-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 stnPptp 1.3.6.1.4.1.3551.4.1.10
The MIB module that describes managed objects of general use by the Point-to-Point Transport Protocol.
       stnPptpObjects 1.3.6.1.4.1.3551.4.1.10.1
           stnPptpScalar 1.3.6.1.4.1.3551.4.1.10.1.1
               stnPptpConfig 1.3.6.1.4.1.3551.4.1.10.1.1.1
                   stnPptpAdminState 1.3.6.1.4.1.3551.4.1.10.1.1.1.1 integer read-write
This object defines the administrative state of this PPTP tunnel domain. Setting this object to 'disabled' causes all tunnels to be immediately disconnected and no further tunnels to be either initiated or accepted. Enumeration: 'disabled': 2, 'drain': 3, 'enabled': 1.
               stnPptpStats 1.3.6.1.4.1.3551.4.1.10.1.1.2
                   stnPptpProtocolVersion 1.3.6.1.4.1.3551.4.1.10.1.1.2.1 octet string read-only
Vector of supported PPTP protocol version and revision numbers. Supported versions are identified via a two octet pairing where the first octet indicates the version and the second octet contains the revision.
                   stnPptpVendorName 1.3.6.1.4.1.3551.4.1.10.1.1.2.2 displaystring read-only
This object identifies the Vendor name of the PPTP protocol stack.
                   stnPptpFirmwareRev 1.3.6.1.4.1.3551.4.1.10.1.1.2.3 integer32 read-only
This object defines the firmware revision for the PPTP protocol stack.
           stnPptpDomainConfigTable 1.3.6.1.4.1.3551.4.1.10.1.2 no-access
The PPTP Domain configuration table.
               stnPptpDomainConfigEntry 1.3.6.1.4.1.3551.4.1.10.1.2.1 no-access
An PPTP Domain configuration entry. An entry in this table may correspond to a single endpoint or a group of tunnel endpoints.
                   stnPptpDomainConfigIdentifier 1.3.6.1.4.1.3551.4.1.10.1.2.1.1 displaystring no-access
This object is not used.
                   stnPptpDomainConfigAdminState 1.3.6.1.4.1.3551.4.1.10.1.2.1.2 integer read-only
This object is not used. Enumeration: 'disabled': 2, 'drain': 3, 'enabled': 1.
                   stnPptpDomainConfigAuthentication 1.3.6.1.4.1.3551.4.1.10.1.2.1.3 integer read-only
This object is not used Enumeration: 'simple': 2, 'none': 1, 'challenge': 3.
                   stnPptpDomainConfigSecret 1.3.6.1.4.1.3551.4.1.10.1.2.1.4 octet string read-only
This object is not used
                   stnPptpDomainConfigTunnelSecurity 1.3.6.1.4.1.3551.4.1.10.1.2.1.5 integer read-only
This object is not used. Enumeration: 'none': 1, 'other': 2, 'ipSec': 3.
                   stnPptpDomainConfigTunnelHelloInterval 1.3.6.1.4.1.3551.4.1.10.1.2.1.6 integer32 read-only
This object is not used.
                   stnPptpDomainConfigTunnelIdleTimeout 1.3.6.1.4.1.3551.4.1.10.1.2.1.7 integer32 read-only
This object is not used.
                   stnPptpDomainConfigControlRWS 1.3.6.1.4.1.3551.4.1.10.1.2.1.8 integer32 read-only
This object is not used.
                   stnPptpDomainConfigControlRetransmissions 1.3.6.1.4.1.3551.4.1.10.1.2.1.9 integer32 read-only
This object is not used.
                   stnPptpDomainConfigPayloadSequencing 1.3.6.1.4.1.3551.4.1.10.1.2.1.10 truthvalue read-only
This object is not used.
                   stnPptpDomainConfigPayloadRWS 1.3.6.1.4.1.3551.4.1.10.1.2.1.11 integer32 read-only
This object is not used.
                   stnPptpDomainConfigDelayedAckTimeout 1.3.6.1.4.1.3551.4.1.10.1.2.1.12 milliseconds read-only
This object is not used.
                   stnPptpDomainConfigReassemblyTimeout 1.3.6.1.4.1.3551.4.1.10.1.2.1.13 milliseconds read-only
This object is not used.
                   stnPptpDomainConfigStatus 1.3.6.1.4.1.3551.4.1.10.1.2.1.14 rowstatus read-only
This object is not used.
           stnPptpDomainStatsTable 1.3.6.1.4.1.3551.4.1.10.1.3 no-access
The PPTP Domain Status and Statistics table.
               stnPptpDomainStatsEntry 1.3.6.1.4.1.3551.4.1.10.1.3.1 no-access
An PPTP Domain Stats entry. An entry in this table may correspond to a single endpoint or a group of tunnel endpoints.
                   stnPptpDomainStatsIdentifier 1.3.6.1.4.1.3551.4.1.10.1.3.1.1 displaystring no-access
The identifier, usually in the form of a Domain Name (full or partial), describing a single tunnel endpoint or a domain of tunnel endpoints.
                   stnPptpDomainStatsTotalTunnels 1.3.6.1.4.1.3551.4.1.10.1.3.1.2 counter32 read-only
This object returns the total number of tunnels that have successfully reached the established state for this tunnel domain.
                   stnPptpDomainStatsFailedTunnels 1.3.6.1.4.1.3551.4.1.10.1.3.1.3 counter32 read-only
This object returns the number of tunnels that failed to reach the established state for this tunnel domain.
                   stnPptpDomainStatsFailedAuthentications 1.3.6.1.4.1.3551.4.1.10.1.3.1.4 counter32 read-only
This object is not used.
                   stnPptpDomainStatsActiveTunnels 1.3.6.1.4.1.3551.4.1.10.1.3.1.5 gauge32 read-only
This object returns the number of tunnels that are currently active for this domain.
                   stnPptpDomainStatsTotalSessions 1.3.6.1.4.1.3551.4.1.10.1.3.1.6 counter32 read-only
This object returns the total number of sessions that have successfully reached the established state for this tunnel domain.
                   stnPptpDomainStatsFailedSessions 1.3.6.1.4.1.3551.4.1.10.1.3.1.7 counter32 read-only
This object returns the number of sessions that failed to reach the established state for this tunnel domain.
                   stnPptpDomainStatsActiveSessions 1.3.6.1.4.1.3551.4.1.10.1.3.1.8 gauge32 read-only
This object returns the number of sessions that are currently active for this domain.
                   stnPptpDomainStatsControlRecvOctets 1.3.6.1.4.1.3551.4.1.10.1.3.1.9 counter32 read-only
This object returns the number of control channel octets received for this tunnel domain.
                   stnPptpDomainStatsControlRecvPackets 1.3.6.1.4.1.3551.4.1.10.1.3.1.10 counter32 read-only
This object returns the number of control packets received for this tunnel domain.
                   stnPptpDomainStatsControlSendOctets 1.3.6.1.4.1.3551.4.1.10.1.3.1.11 counter32 read-only
This object returns the number of control channel octets that were transmitted to tunnel endpoints for this domain.
                   stnPptpDomainStatsControlSendPackets 1.3.6.1.4.1.3551.4.1.10.1.3.1.12 counter32 read-only
This object returns the number of control packets that were transmitted to tunnel endpoints for this domain.
                   stnPptpDomainStatsPayloadRecvOctets 1.3.6.1.4.1.3551.4.1.10.1.3.1.13 counter32 read-only
This object returns the number of payload channel octets that were received for this tunnel domain.
                   stnPptpDomainStatsPayloadRecvPackets 1.3.6.1.4.1.3551.4.1.10.1.3.1.14 counter32 read-only
This object returns the number of payload packets that were received for this tunnel domain.
                   stnPptpDomainStatsPayloadRecvDiscards 1.3.6.1.4.1.3551.4.1.10.1.3.1.15 counter32 read-only
This object returns the number of received payload packets that were discarded by this this tunnel domain.
                   stnPptpDomainStatsPayloadSendOctets 1.3.6.1.4.1.3551.4.1.10.1.3.1.16 counter32 read-only
This object returns the number of payload channel octets that were transmitted to tunnel peers within this tunnel domain.
                   stnPptpDomainStatsPayloadSendPackets 1.3.6.1.4.1.3551.4.1.10.1.3.1.17 counter32 read-only
This object returns the number of payload packets that were transmitted to tunnel peers within this tunnel domain.
           stnPptpTunnelConfigTable 1.3.6.1.4.1.3551.4.1.10.1.4 no-access
The PPTP tunnel configuration table.
               stnPptpTunnelConfigEntry 1.3.6.1.4.1.3551.4.1.10.1.4.1 no-access
A PPTP tunnel interface configuration entry.
                   stnPptpTunnelConfigIfIndex 1.3.6.1.4.1.3551.4.1.10.1.4.1.1 interfaceindex read-only
This value for this object is equal to the value of ifIndex of the Interfaces MIB for tunnel interfaces of type PPTP.
                   stnPptpTunnelConfigAuthentication 1.3.6.1.4.1.3551.4.1.10.1.4.1.2 integer read-write
This object is not used. Enumeration: 'simple': 2, 'none': 1, 'challenge': 3.
                   stnPptpTunnelConfigSecret 1.3.6.1.4.1.3551.4.1.10.1.4.1.3 octet string read-write
This object is not used.
                   stnPptpTunnelConfigSecurity 1.3.6.1.4.1.3551.4.1.10.1.4.1.4 integer read-write
This object is not used. Enumeration: 'none': 1, 'other': 2, 'ipsec': 3.
                   stnPptpTunnelConfigHelloInterval 1.3.6.1.4.1.3551.4.1.10.1.4.1.5 integer32 read-write
This object is not used.
                   stnPptpTunnelConfigIdleTimeout 1.3.6.1.4.1.3551.4.1.10.1.4.1.6 integer32 read-write
This object is not used.
                   stnPptpTunnelConfigControlRWS 1.3.6.1.4.1.3551.4.1.10.1.4.1.7 integer32 read-write
This object is not used.
                   stnPptpTunnelConfigControlRetransmissions 1.3.6.1.4.1.3551.4.1.10.1.4.1.8 integer32 read-write
This object is not used.
                   stnPptpTunnelConfigPayloadSequencing 1.3.6.1.4.1.3551.4.1.10.1.4.1.9 truthvalue read-write
This object is not used.
                   stnPptpTunnelConfigPayloadRWS 1.3.6.1.4.1.3551.4.1.10.1.4.1.10 integer32 read-write
This object is not used.
                   stnPptpTunnelConfigDelayedAckTimeout 1.3.6.1.4.1.3551.4.1.10.1.4.1.11 milliseconds read-write
This object is not used.
                   stnPptpTunnelConfigReassemblyTimeout 1.3.6.1.4.1.3551.4.1.10.1.4.1.12 milliseconds read-write
This object is not used.
                   stnPptpTunnelConfigTransport 1.3.6.1.4.1.3551.4.1.10.1.4.1.13 integer read-write
This object defines the underlying transport media that is in use for this tunnel entry. Different tunnel transports may define MIB extensions to the PPTP tunnel table to realize the transport layer. Enumeration: 'ipGre': 1.
           stnPptpTunnelStatsTable 1.3.6.1.4.1.3551.4.1.10.1.5 no-access
The PPTP tunnel status and statistics table.
               stnPptpTunnelStatsEntry 1.3.6.1.4.1.3551.4.1.10.1.5.1 no-access
An PPTP tunnel interface stats entry.
                   stnPptpTunnelStatsIfIndex 1.3.6.1.4.1.3551.4.1.10.1.5.1.1 interfaceindex read-only
This value for this object is equal to the value of ifIndex of the Interfaces MIB for tunnel interfaces of type PPTP.
                   stnPptpTunnelStatsLocalTID 1.3.6.1.4.1.3551.4.1.10.1.5.1.2 integer32 read-only
This object contains the local tunnel Identifier.
                   stnPptpTunnelStatsState 1.3.6.1.4.1.3551.4.1.10.1.5.1.3 integer read-only
This field contains the current state of the control tunnel. Enumeration: 'tunnelConnecting': 2, 'tunnelEstablished': 3, 'tunnelIdle': 1, 'tunnelDisconnecting': 4.
                   stnPptpTunnelStatsInitiated 1.3.6.1.4.1.3551.4.1.10.1.5.1.4 integer read-only
This object indicates whether the tunnel was initiated locally or by the remote tunnel peer. Enumeration: 'locally': 1, 'remotely': 2.
                   stnPptpTunnelStatsRemoteHostName 1.3.6.1.4.1.3551.4.1.10.1.5.1.5 displaystring read-only
This object contains the host name as discovered during the tunnel establishment phase
                   stnPptpTunnelStatsRemoteVendorName 1.3.6.1.4.1.3551.4.1.10.1.5.1.6 displaystring read-only
This object identifies the vendor name of the peer's PPTP implementation.
                   stnPptpTunnelStatsRemoteFirmwareRevision 1.3.6.1.4.1.3551.4.1.10.1.5.1.7 integer32 read-only
This object contains the tunnel peer's firmware revision number.
                   stnPptpTunnelStatsRemoteProtocolVersion 1.3.6.1.4.1.3551.4.1.10.1.5.1.8 octet string read-only
This object describes the protocol version and revision of the tunnel peers implementation. The first octet contains the protocol version. The second octet contains the protocol revision.
                   stnPptpTunnelStatsBearerCapabilities 1.3.6.1.4.1.3551.4.1.10.1.5.1.9 integer read-only
This object describes the Bearer Capabilities of the tunnel peer. Enumeration: 'none': 1, 'digitalAnalog': 4, 'analog': 3, 'digital': 2.
                   stnPptpTunnelStatsFramingCapabilities 1.3.6.1.4.1.3551.4.1.10.1.5.1.10 integer read-only
This object describes the Framing Capabilities of the tunnel peer. Enumeration: 'async': 3, 'none': 1, 'sync': 2, 'syncAsync': 4.
                   stnPptpTunnelStatsControlRecvPackets 1.3.6.1.4.1.3551.4.1.10.1.5.1.11 counter32 read-only
This object contains the number of control packets received on the tunnel.
                   stnPptpTunnelStatsControlSendPackets 1.3.6.1.4.1.3551.4.1.10.1.5.1.12 counter32 read-only
This object contains the number of control packets that were transmitted to the tunnel peer.
                   stnPptpTunnelStatsTotalSessions 1.3.6.1.4.1.3551.4.1.10.1.5.1.13 counter32 read-only
This object contains the total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created.
                   stnPptpTunnelStatsFailedSessions 1.3.6.1.4.1.3551.4.1.10.1.5.1.14 counter32 read-only
This object contains the total number of sessions that were initiated but failed to reach the established phase.
                   stnPptpTunnelStatsActiveSessions 1.3.6.1.4.1.3551.4.1.10.1.5.1.15 gauge32 read-only
This object contains the total number of sessions in the established state for this tunnel.
                   stnPptpTunnelStatsLastResultCode 1.3.6.1.4.1.3551.4.1.10.1.5.1.16 integer32 read-only
This object contains the last value of the result code as described in the Result Code which caused the tunnel to disconnect.
                   stnPptpTunnelStatsLastErrorCode 1.3.6.1.4.1.3551.4.1.10.1.5.1.17 integer32 read-only
This object contains the last value of the error code as described in the Result Code which caused the tunnel to disconnect.
                   stnPptpTunnelStatsLastErrorMessage 1.3.6.1.4.1.3551.4.1.10.1.5.1.18 displaystring read-only
This object contains the last value of the optional message as described in the Result Code which caused the tunnel to disconnect.
           stnPptpSessionStatsTable 1.3.6.1.4.1.3551.4.1.10.1.7 no-access
The PPTP session status and statistics table.
               stnPptpSessionStatsEntry 1.3.6.1.4.1.3551.4.1.10.1.7.1 no-access
An PPTP session interface stats entry.
                   stnPptpSessionStatsTunnelIfIndex 1.3.6.1.4.1.3551.4.1.10.1.7.1.1 interfaceindex read-only
This object identifies the sessions associated PPTP tunnel ifIndex value.
                   stnPptpSessionStatsHLIfIndex 1.3.6.1.4.1.3551.4.1.10.1.7.1.2 interfaceindex read-only
This object identifies the ifIndex value of the interface that is either below (Lower) the tunnel (if this tunnel endpoint is a PAC) or above (Higher) the tunnel (if this tunnel endpoint is a PNS). For example this could be a DS0 ifIndex on a PAC or it would be the PPP ifIndex on the PNS.
                   stnPptpSessionStatsLocalCID 1.3.6.1.4.1.3551.4.1.10.1.7.1.3 integer32 read-only
This object contains the local call identifier for the session.
                   stnPptpSessionStatsRemoteCID 1.3.6.1.4.1.3551.4.1.10.1.7.1.4 integer32 read-only
This object is not used.
                   stnPptpSessionStatsUserName 1.3.6.1.4.1.3551.4.1.10.1.7.1.5 displaystring read-only
This object identifies the peer session name on this interface. This is typically the login name of the remote user. If the user name is unknown to the local tunnel peer then this object will contain a null string.
                   stnPptpSessionStatsState 1.3.6.1.4.1.3551.4.1.10.1.7.1.6 integer read-only
This object contains the current state of the session. Enumeration: 'sessionIdle': 1, 'sessionDisconnecting': 4, 'sessionConnecting': 2, 'sessionEstablished': 3.
                   stnPptpSessionStatsCallType 1.3.6.1.4.1.3551.4.1.10.1.7.1.7 integer read-only
This object indicates the type of call and the role this tunnel peer is providing for this session. For example, pacIncoming(1) indicates that this tunnel peer is acting as a PAC and generated a Incoming-Call-Request to the tunnel peer (the PNS). Note that tunnel peers can be both PAC and PNS simultaneously. Enumeration: 'pacOutgoing': 3, 'pnsIncoming': 2, 'pnsOutgoing': 4, 'pacIncoming': 1.
                   stnPptpSessionStatsCallSerialNumber 1.3.6.1.4.1.3551.4.1.10.1.7.1.8 integer32 read-only
This object contains the serial number that has been assigned to this session.
                   stnPptpSessionStatsTxConnectSpeed 1.3.6.1.4.1.3551.4.1.10.1.7.1.9 integer32 read-only
This object returns the last known transmit baud rate for this session.
                   stnPptpSessionStatsRxConnectSpeed 1.3.6.1.4.1.3551.4.1.10.1.7.1.10 integer32 read-only
This object returns the last known receive baud rate for this session established.
                   stnPptpSessionStatsCallBearerType 1.3.6.1.4.1.3551.4.1.10.1.7.1.11 integer read-only
This object describes the bearer type of this session. Enumeration: 'none': 1, 'analog': 3, 'digital': 2.
                   stnPptpSessionStatsFramingType 1.3.6.1.4.1.3551.4.1.10.1.7.1.12 integer read-only
This object describes the framing type of this session. Enumeration: 'async': 3, 'none': 1, 'sync': 2.
                   stnPptpSessionStatsPhysChanId 1.3.6.1.4.1.3551.4.1.10.1.7.1.13 integer32 read-only
This object contains the physical channel identifier for the session.
                   stnPptpSessionStatsDNIS 1.3.6.1.4.1.3551.4.1.10.1.7.1.14 displaystring read-only
This object identifies the Dialed Number Information String that the PAC obtained from the network for the session. If no DNIS was provided then a null string will be returned.
                   stnPptpSessionStatsCLID 1.3.6.1.4.1.3551.4.1.10.1.7.1.15 displaystring read-only
This object identifies the Calling Line ID that the PAC obtained from the network for the session. If no CLID was provided then a null string will be returned.
                   stnPptpSessionStatsSubAddress 1.3.6.1.4.1.3551.4.1.10.1.7.1.16 displaystring read-only
This object identifies the Sub Address that the PAC obtained from the network for the session. If no Sub Address was provided then a null string will be returned.
                   stnPptpSessionStatsPrivateGroupID 1.3.6.1.4.1.3551.4.1.10.1.7.1.17 displaystring read-only
This object identifies the Private Group Identifier used for this tunneled session. If no Private Group Identifier was provided then a null string will be returned.
                   stnPptpSessionStatsLocalRWS 1.3.6.1.4.1.3551.4.1.10.1.7.1.18 integer32 read-only
This object returns the local send window size for this session.
                   stnPptpSessionStatsRemoteInitialRWS 1.3.6.1.4.1.3551.4.1.10.1.7.1.19 integer32 read-only
This object returns the initial remote send window size for this session.
                   stnPptpSessionStatsRemotePPD 1.3.6.1.4.1.3551.4.1.10.1.7.1.20 integer32 read-only
This object contains the Packet Processing Delay for the session.
                   stnPptpSessionStatsRecvZLB 1.3.6.1.4.1.3551.4.1.10.1.7.1.21 counter32 read-only
This object returns the total number of Zero Length Body acknowlegement payload packets received for this session.
                   stnPptpSessionStatsOutSequence 1.3.6.1.4.1.3551.4.1.10.1.7.1.22 counter32 read-only
This object returns the total number of packets received for this session which were received out of sequence.
                   stnPptpSessionStatsSendZLB 1.3.6.1.4.1.3551.4.1.10.1.7.1.23 counter32 read-only
This object returns the total number of Zero Length Body acknowledgement packets transmitted on this session.
                   stnPptpSessionStatsAckTimeouts 1.3.6.1.4.1.3551.4.1.10.1.7.1.24 counter32 read-only
This object returns the total number of acknowledgement timeouts seen on payload packets for this session.
                   stnPptpSesssionStatsCurrentRemoteRWS 1.3.6.1.4.1.3551.4.1.10.1.7.1.25 gauge32 read-only
This object contains the current remote receive window size as determined by the local flow control mechanism employed.
                   stnPptpSessionStatsSendSeq 1.3.6.1.4.1.3551.4.1.10.1.7.1.26 integer32 read-only
This object contains the next send sequence number for for this session.
                   stnPptpSessionStatsSendSeqAck 1.3.6.1.4.1.3551.4.1.10.1.7.1.27 integer32 read-only
This object contains the send sequence number that the tunnel peer has acknowledged for the payload channel. The flow control state can be determined by subtracting the stnPptpSessionStatsSendSeq from stnPptpSessionStatsSendSeqAck and comparing this value to stnPptpSesssionStatsCurrentRemoteRWS.
                   stnPptpSessionStatsRecvSeq 1.3.6.1.4.1.3551.4.1.10.1.7.1.28 integer32 read-only
This object contains the next receive sequence number expected to be received on this session.
                   stnPptpSessionStatsRecvSeqAck 1.3.6.1.4.1.3551.4.1.10.1.7.1.29 integer32 read-only
This object contains the last receive sequence number that was acknowledged back to the tunnel peer for the session.
           stnPptpTunnelMapTable 1.3.6.1.4.1.3551.4.1.10.1.8 no-access
The PPTP Tunnel index mapping table.
               stnPptpTunnelMapEntry 1.3.6.1.4.1.3551.4.1.10.1.8.1 no-access
An PPTP tunnel index map entry.
                   stnPptpTunnelMapLocalTID 1.3.6.1.4.1.3551.4.1.10.1.8.1.1 integer32 read-only
This object contains the local tunnel Identifier.
                   stnPptpTunnelMapIfIndex 1.3.6.1.4.1.3551.4.1.10.1.8.1.2 interfaceindex read-only
This value for this object is equal to the value of ifIndex of the Interfaces MIB for tunnel interfaces of type PPTP.
           stnPptpSessionMapTable 1.3.6.1.4.1.3551.4.1.10.1.9 no-access
The PPTP Session index mapping table.
               stnPptpSessionMapEntry 1.3.6.1.4.1.3551.4.1.10.1.9.1 no-access
An PPTP Session index map entry.
                   stnPptpSessionMapHLIfIndex 1.3.6.1.4.1.3551.4.1.10.1.9.1.1 interfaceindex read-only
This object identifies the ifIndex value of the interface that is either below (Lower) the tunnel (if this tunnel endpoint is a PAC) or above (Higher) the tunnel (if this tunnel endpoint is a PNS). For example this could be a DS0 ifIndex on a PAC or it would be the PPP ifIndex on the PNS.
                   stnPptpSessionMapTunnelIfIndex 1.3.6.1.4.1.3551.4.1.10.1.9.1.2 interfaceindex read-only
This object identifies the sessions associated PPTP tunnel ifIndex value.
                   stnPptpSessionMapLocalCID 1.3.6.1.4.1.3551.4.1.10.1.9.1.3 integer32 read-only
This object contains the local call identifier for the session.
           stnPptpDomainMapTable 1.3.6.1.4.1.3551.4.1.10.1.10 no-access
This table provides a mapping between PPTP Domain identifiers, hostnames, and IP-ATM information
                 stnPptpDomainMapTableEntry 1.3.6.1.4.1.3551.4.1.10.1.10.1 no-access
An entry within the STN PPTP Map Table.
                     stnPptpDomainMapIdentifier 1.3.6.1.4.1.3551.4.1.10.1.10.1.1 displaystring no-access
PPTP Domain Identifier.
                     stnPptpDomainMapHostName 1.3.6.1.4.1.3551.4.1.10.1.10.1.2 displaystring read-only
The hostname that maps to the PPTP Domain Identifier.
                     stnPptpDomainMapType 1.3.6.1.4.1.3551.4.1.10.1.10.1.3 stndomainmaptype read-only
Identifiers whether the PPTP Domain maps to an IP subnet or an ATM circuit.
                     stnPptpDomainMapTypeInfo 1.3.6.1.4.1.3551.4.1.10.1.10.1.4 displaystring read-only
Provides either IP or ATM specific display info.
       stnPptpMibConformance 1.3.6.1.4.1.3551.4.1.10.2
           stnPptpGroups 1.3.6.1.4.1.3551.4.1.10.2.1
               stnPptpConfigGroup 1.3.6.1.4.1.3551.4.1.10.2.1.1
A collection of objects providing configuration information of the PPTP protocol, tunnels and sessions.
               stnPptpStatsGroup 1.3.6.1.4.1.3551.4.1.10.2.1.2
A collection of objects providing status and statistics of the PPTP protocol, tunnels and sessions.
               stnPptpDomainGroup 1.3.6.1.4.1.3551.4.1.10.2.1.4
A collection of objects providing configuration, status and statistics of PPTP tunnel domains.
               stnPptpMappingGroup 1.3.6.1.4.1.3551.4.1.10.2.1.5
A collection of objects providing index mapping.
           stnPptpCompliances 1.3.6.1.4.1.3551.4.1.10.2.2
               stnPptpCompliance 1.3.6.1.4.1.3551.4.1.10.2.2.1
The compliance statement for SNMPv2 entities which implement the PPTP MIB.
       stnPptpTraps 1.3.6.1.4.1.3551.4.1.10.3