SONOMASYSTEMS-SONOMA-ETHERNET-MIB: View SNMP OID List / Download MIB

VENDOR: SONOMA SYSTEMS


 Home MIB: SONOMASYSTEMS-SONOMA-ETHERNET-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SONOMASYSTEMS-SONOMA-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sonomaEthernet 1.3.6.1.4.1.2926.25.5.1
     ethernetAdapterGroup 1.3.6.1.4.1.2926.25.5.1.1
         enetSMCGroup 1.3.6.1.4.1.2926.25.5.1.1.1
             enetSMCConfigTable 1.3.6.1.4.1.2926.25.5.1.1.1.1 no-access
A table of Ethernet physical port configuration parameters.
                 enetSMCConfigEntry 1.3.6.1.4.1.2926.25.5.1.1.1.1.1 no-access
An entry in the enetSMC port table.
                     enetSMCConfigIndex 1.3.6.1.4.1.2926.25.5.1.1.1.1.1.1 integer read-only
The value of the index uniquely specifies the physical port number to which this entry is applicable.
                     enetSMCConfigLineSpeed 1.3.6.1.4.1.2926.25.5.1.1.1.1.1.2 integer read-write
The line speed configured for this adapter. Auto and 100 Mbit are only valid for the 9332 card. Enumeration: 'speedAuto': 3, 'speed100Mbps': 2, 'speed10Mbps': 1.
                     enetSMCConfigInterface 1.3.6.1.4.1.2926.25.5.1.1.1.1.1.3 integer read-write
This type of interface which is configured on this adapter. Setting the value to aui (1) is an invalid operation for interfaces which only support twistedPair or utp. Where: aui - Attachment Unit Interface, utp - Unshielded Twisted Pair. Enumeration: 'aui': 1, 'twistedPair': 2, 'utp': 3, 'auto': 5, 'bnc': 4.
                     enetSMCConfigMode 1.3.6.1.4.1.2926.25.5.1.1.1.1.1.4 integer read-write
Indicates which duplex mode is configured on this interface. Enumeration: 'fullDuplex': 2, 'halfDuplex': 1.
             enetSMCStatsTable 1.3.6.1.4.1.2926.25.5.1.1.1.2 no-access
A table of Ethernet physical port statistics parameters.
                 enetSMCStatsEntry 1.3.6.1.4.1.2926.25.5.1.1.1.2.1 no-access
An entry in the enetSMC port table.
                     enetSMCStatsIndex 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.1 integer read-only
The value of the index uniquely specifies the physical port number to which this entry is applicable.
                     enetSMCSQEErrors 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.2 counter read-only
The number of SQE/Heartbeat errors detected.
                     enetSMCRxMissedFrames 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.3 counter read-only
The number of receive frames missed because no buffers were available to accept the incoming data.
                     enetSMCRetries 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.4 counter read-only
Total number of transmission retries by this station on the attached LAN.
                     enetSMCCollisions 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.5 counter read-only
Total collisions detected on the attached LAN.
                     enetSMCRunts 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.6 counter read-only
Total number of runts detected on the attached LAN.
                     enetSMCFRAMorCRCErrors 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.7 counter read-only
Total number of Framing or CRC errors detected on LAN.
                     enetSMCTxDeferrals 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.8 counter read-only
The total number of TX deferrals encountered on the LAN segment.
                     enetSMCLateCollisions 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.9 counter read-only
Total number of late collisions encountered during transmission by this port.
                     enetSMCLossofCarrierErrors 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.10 counter read-only
Total number of loss of carrier errors encountered by this port.
                     enetSMCRetryErrors 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.11 counter read-only
Total number of TX retry limit errors encountered during transmission by this port.
                     enetSMCNoOfLinkResets 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.18 counter read-only
This is the number of link resets which have occurred since the last reinitialization of the unit.
                     enetSMCLastLinkResetReason 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.19 integer read-only
This object gives the reason code for the last reset which occurred on this LAN physical link. A value of noReason(1) is returned if the link has not reset. A value of management(2) is returned when a link reset has been caused by a management protocol (either SNMP or by LMS). A value of deviceReset(3) is returned if the link reset was caused by a hardware failure. A value of cableDrop(4) is returned when the link reset was caused by a missing or faulty cable. Enumeration: 'noReason': 1, 'management': 2, 'deviceReset': 3, 'cableDrop': 4.
                     enetSMCTimeSinceLastLinkReset 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.20 integer read-only
This is the time, in seconds, since the last link reset.
                     enetSMCRxPackets 1.3.6.1.4.1.2926.25.5.1.1.1.2.1.21 counter read-only
This is the number of packets received on this link by the device driver.
             enetSMCStatusTable 1.3.6.1.4.1.2926.25.5.1.1.1.3 no-access
A table of Ethernet physical port status parameters.
                 enetSMCStatusEntry 1.3.6.1.4.1.2926.25.5.1.1.1.3.1 no-access
An entry in the enetSMC port status table.
                     enetSMCLineSpeed 1.3.6.1.4.1.2926.25.5.1.1.1.3.1.1 integer read-only
Indicates the current line speed. Enumeration: 'speedAuto': 3, 'speed100Mbps': 2, 'speed10Mbps': 1.
                     enetSMCLineMode 1.3.6.1.4.1.2926.25.5.1.1.1.3.1.2 integer read-only
Indicates the current duplex mode on this interface. Enumeration: 'fullDuplex': 2, 'halfDuplex': 1.
                     enetSMCLineInterface 1.3.6.1.4.1.2926.25.5.1.1.1.3.1.3 integer read-only
Indicate the interface as detected. Enumeration: 'aui': 1, 'twistedPair': 2, 'utp': 3, 'auto': 5, 'bnc': 4.