SNMPEXT-MIB: View SNMP OID List / Download MIB

VENDOR: ARROWPOINT COMMUNICATIONS INC.


 Home MIB: SNMPEXT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, APENT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 apSnmpExtMib 1.3.6.1.4.1.2467.1.22.1
 apSnmpExtTrapGeneric 1.3.6.1.4.1.2467.1.22.2 integer read-write
This object controls the state of Generic trap generation. ArrowPoint supports the following generic traps: 1) Cold start, 2) Warm start, 3) Link down, 4) Link up, 5) SNMP authentication failure. SNMP authentication failure traps can be individually disallowed using the snmpEnableAuthenTraps object. Enumeration: 'enable': 1, 'disable': 0.
 apSnmpExtTrapEnterprise 1.3.6.1.4.1.2467.1.22.3 integer read-write
This object controls the state of Enterprise trap generation. RMON event traps are treated as enterprise traps. Enumeration: 'enable': 1, 'disable': 0.
 apSnmpExtCommunityTable 1.3.6.1.4.1.2467.1.22.4 no-access
A table of SNMP community information used to determine whether read or write access is permitted to the MIBs. A maximum of 5 concurrent communities are supported.
     apSnmpExtCommunityEntry 1.3.6.1.4.1.2467.1.22.4.1 no-access
An SNMP community entry describing one community name
         apSnmpExtCommunityName 1.3.6.1.4.1.2467.1.22.4.1.1 displaystring read-only
A community name used for SNMP access to this system
         apSnmpExtCommunityType 1.3.6.1.4.1.2467.1.22.4.1.2 integer read-only
The privilge level of the associated community name when accessing this system. A community level of allows read-only access, a community level of allows read and write access. Enumeration: 'ro': 0, 'rw': 1.
         apSnmpExtCommunityStatus 1.3.6.1.4.1.2467.1.22.4.1.3 rowstatus read-only
Status entry for this row
 apSnmpExtTrapTable 1.3.6.1.4.1.2467.1.22.5 no-access
     apSnmpExtTrapEntry 1.3.6.1.4.1.2467.1.22.5.1 no-access
This table contains the configured trap hosts. All entries in this table will receive SNMP traps when generated. A maximum of 5 concurrent trap hosts are supported.
         apSnmpExtTrapIp 1.3.6.1.4.1.2467.1.22.5.1.1 ipaddress read-only
An IP Address of a host configured to receive traps
         apSnmpExtTrapCommunity 1.3.6.1.4.1.2467.1.22.5.1.2 displaystring read-only
The community name to use when sending traps to this device
         apSnmpExtTrapStatus 1.3.6.1.4.1.2467.1.22.5.1.3 rowstatus read-only
Status entry for this row
 apSnmpExtReloadConfigVal 1.3.6.1.4.1.2467.1.22.6 integer32 read-write
This object is used to control apSnmpExtReloadSet, which provides a SNMP based reboot capability. When this object is set to 0, SNMP based reboot is not allowed. When this object is set between 1 - (2^32) - 2, the equivalent value must be written to apSnmpExtReloadSet to cause a reboot. When this object is set to (2^32) -1, a reboot may be caused with any write value to apSnmpExtReloadSet. For security purposes this object always returns 0 on read
 apSnmpExtReloadSet 1.3.6.1.4.1.2467.1.22.7 integer32 read-write
This object provides SNMP based reboot capabilities. The required set value to effect a reboot is explained in apSnmpExtReloadConfigVal.
 apSnmpExtServiceTraps 1.3.6.1.4.1.2467.1.22.8 integer read-write
This object controls the generation of ArrowPoint enterprise traps conincident with service transition. See the trap definition in the svcExt.mib name apSvcTransitionTrap. Enumeration: 'enable': 1, 'disable': 0.
 apSnmpExtLoginFailTraps 1.3.6.1.4.1.2467.1.22.9 integer read-write
This object controls the generation of ArrowPoint enterprise traps conincident with FTP/Console/Telnet authentication failure. Enumeration: 'enable': 1, 'disable': 0.
 apSnmpExtReloadTraps 1.3.6.1.4.1.2467.1.22.10 integer read-write
This object controls the generation of ArrowPoint enterprise traps conincident a system reload Enumeration: 'enable': 1, 'disable': 0.
 apSnmpExtLastTrap 1.3.6.1.4.1.2467.1.22.11 displaystring read-only
This object contains a string which details the last trap which was generated in the system
 apSnmpExtRedundancyTraps 1.3.6.1.4.1.2467.1.22.12 integer read-write
This object controls the generation of ArrowPoint enterprise traps on Redundancy state changes. Enumeration: 'enable': 1, 'disable': 0.
 apSnmpExtForceDumpConfigVal 1.3.6.1.4.1.2467.1.22.13 integer32 read-write
This object is used to control apSnmpExtForceDump, which provides a SNMP based dump capability. When this object is set to 0, SNMP based dumping is not allowed. When this object is set between 1 - (2^32) - 2, the equivalent value must be written to apSnmpExtForceDump to cause a dump. When this object is set to (2^32) -1, a dump may be caused with any write value to apSnmpExtReloadSet. For security purposes this object always returns 0 on read.
 apSnmpExtForceDumpSlot 1.3.6.1.4.1.2467.1.22.14 integer32 read-write
This object provides SNMP based dumping capabilities on the CS800. This is the slot number of the module to force to dump and then reload. On the cs100 this object is not used. For security purposes this object always returns a 0.
 apSnmpExtForceDumpSubSlot 1.3.6.1.4.1.2467.1.22.15 integer32 read-write
This object provides SNMP based dumping capabilities on the CS800. This is the sub-slot number of the module to force to dump and then reload. On the cs100 this object is not used. For security purposes this object always returns a 0.
 apSnmpExtForceDump 1.3.6.1.4.1.2467.1.22.16 integer32 read-write
This object provides SNMP based dumping capabilities. Setting this value to non-zero will force a dump and reload the unit. On a cs800 the apSnmpExtForceDumpSlot and apSnmapExtForceDumpSubSlot objects must be set to valid values or the setting of this object is ignored. For security purposes this object always returns a 0. The required set value to effect a reboot is explained in apSnmpExtForceDumpConfigVal.
 apSnmpExtDosSynTraps 1.3.6.1.4.1.2467.1.22.17 integer read-write
This object controls the generation of ArrowPoint enterprise traps conincident with Denial of Service (DOS) SYN attacks. See the trap definition in the flowMgrExt.mib name apFlowMgrExtDosSynTrap. Enumeration: 'enable': 1, 'disable': 0.
 apSnmpExtDosLandTraps 1.3.6.1.4.1.2467.1.22.18 integer read-write
This object controls the generation of ArrowPoint enterprise traps conincident with Denial of Service (DOS) LAND attacks. See the trap definition in the flowMgrExt.mib name apFlowMgrExtDosLandTrap. Enumeration: 'enable': 1, 'disable': 0.
 apSnmpExtDosIllegalTraps 1.3.6.1.4.1.2467.1.22.19 integer read-write
This object controls the generation of ArrowPoint enterprise traps conincident with Denial of Service (DOS) Illegal packet format attacks. See the trap definition in the flowMgrExt.mib name apFlowMgrExtDosIllegalTrap. Enumeration: 'enable': 1, 'disable': 0.
 apSnmpExtDosPingTraps 1.3.6.1.4.1.2467.1.22.20 integer read-write
This object controls the generation of ArrowPoint enterprise traps conincident with Denial of Service (DOS) Ping of Death attacks. See the trap definition in the flowMgrExt.mib name apFlowMgrExtDosPingTrap. Enumeration: 'enable': 1, 'disable': 0.
 apSnmpExtDosSmurfTraps 1.3.6.1.4.1.2467.1.22.21 integer read-write
This object controls the generation of ArrowPoint enterprise traps conincident with Denial of Service (DOS) Smurf attacks. See the trap definition in the flowMgrExt.mib name apFlowMgrExtDosSmurfTrap. Enumeration: 'enable': 1, 'disable': 0.
 apSnmpExtDosSynTrapThreshold 1.3.6.1.4.1.2467.1.22.22 integer read-write
This object controls the generation of ArrowPoint enterprise traps conincident with Denial of Service (DOS) SYN attacks. It is the threshold over which a trap will be generated.
 apSnmpExtDosLandTrapThreshold 1.3.6.1.4.1.2467.1.22.23 integer read-write
This object controls the generation of ArrowPoint enterprise traps conincident with Denial of Service (DOS) LAND attacks. It is the threshold over which a trap will be generated.
 apSnmpExtDosIllegalTrapThreshold 1.3.6.1.4.1.2467.1.22.24 integer read-write
This object controls the generation of ArrowPoint enterprise traps conincident with Denial of Service (DOS) attacks due to invalid packets. It is the threshold over which a trap will be generated.
 apSnmpExtDosPingTrapThreshold 1.3.6.1.4.1.2467.1.22.25 integer read-write
This object controls the generation of ArrowPoint enterprise traps conincident with Denial of Service (DOS) Ping of Death attacks. It is the threshold over which a trap will be generated.
 apSnmpExtDosSmurfTrapThreshold 1.3.6.1.4.1.2467.1.22.26 integer read-write
This object controls the generation of ArrowPoint enterprise traps conincident with Denial of Service (DOS) Smurf attacks. It is the threshold over which a trap will be generated.
   apSnmpExtReloadTrap 1.3.6.1.4.1.2467.1.220.1
This trap is generated when a reboot of the system is performed.