SLE-MPLS-TP-NODE-MIB: View SNMP OID List / Download MIB

VENDOR: DASAN CO.,LTD.


 Home MIB: SLE-MPLS-TP-NODE-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 sleMpls 1.3.6.1.4.1.6296.101.16
SLE MPLS.
       sleMplsTpNode 1.3.6.1.4.1.6296.101.16.13
Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved. This MIB module contains generic object definitions for MPLS Traffic Engineering in transport networks.
             sleMplsTpNodeCfg 1.3.6.1.4.1.6296.101.16.13.1
                 sleMplsTpNodeCfgInfo 1.3.6.1.4.1.6296.101.16.13.1.1
                     sleMplsTpNodeCfgInfoGlobalId 1.3.6.1.4.1.6296.101.16.13.1.1.1 unsigned32 read-only
This object indicates the Global Operator Identifier. this object value should be zero when sleMplsTpNodeConfigInfoCcId and sleMplsTpNodeConfigInfoICcId is configured with non-null value.
                     sleMplsTpNodeCfgInfoItutCc 1.3.6.1.4.1.6296.101.16.13.1.1.2 mplsccid read-only
This object allows the operator or service provider to configure a unique MPLS-TP ITU-T Carrier Code (ICC) either for Ingress ID or Egress ID. This object value should be zero when sleMplsTpNodeConfigInfoGlobalId are assigned with non-zero value.
                     sleMplsTpNodeCfgInfoItutIcc 1.3.6.1.4.1.6296.101.16.13.1.1.3 mplsiccid read-only
This object allows the operator or service provider to configure a unique MPLS-TP ITU-T Carrier Code (ICC) either for Ingress ID or Egress ID. This object value should be zero when sleMplsTpNodeConfigInfoGlobalId are assigned with non-zero value.
                     sleMplsTpNodeCfgInfoNodeId 1.3.6.1.4.1.6296.101.16.13.1.1.4 ipaddress read-only
This object indicates the Node_ID within the operator.
                     sleMplsTpNodeCfgInfoNodeType 1.3.6.1.4.1.6296.101.16.13.1.1.5 integer read-only
This object value should be zero when sleMplsTpNodeConfigInfoGlobalId are assigned with non-zero value . Enumeration: 'ietf': 1, 'itut': 2.
                 sleMplsTpNodeCfgControl 1.3.6.1.4.1.6296.101.16.13.1.2
                     sleMplsTpNodeCfgControlRequest 1.3.6.1.4.1.6296.101.16.13.1.2.1 integer read-write
This object holds the possible read-write columns that can be modified in the TunnelExtNodeConfigTable table. For each read-write column of TunnelExtNodeConfigTable table, a Set Operation control value is added in this object. Enumeration: 'unsetMplsTpNode': 2, 'setMplsTpNode': 1.
                     sleMplsTpNodeCfgControlStatus 1.3.6.1.4.1.6296.101.16.13.1.2.2 slecontrolstatustype read-only
This object displays the status of the configuration done.
                     sleMplsTpNodeCfgControlTimer 1.3.6.1.4.1.6296.101.16.13.1.2.3 gauge32 read-write
This object is based on the SLE style where a timer is configured for every control table.
                     sleMplsTpNodeCfgControlTimestamp 1.3.6.1.4.1.6296.101.16.13.1.2.4 timeticks read-only
This object specifies the time at which the configuration is done.
                     sleMplsTpNodeCfgControlReqResult 1.3.6.1.4.1.6296.101.16.13.1.2.5 slecontrolrequestresulttype read-only
The standard result of the SET operation is stored here.
                     sleMplsTpNodeCfgControlGlobalId 1.3.6.1.4.1.6296.101.16.13.1.2.6 unsigned32 read-write
This object indicates the Global Operator Identifier. This object value should be zero when sleMplsTpNodeConfigControlIccId and sleMplsTpNodeConfigControlccId is configured with non-null value.
                     sleMplsTpNodeCfgControlItutCc 1.3.6.1.4.1.6296.101.16.13.1.2.7 mplsccid read-write
This object allows the operator or service provider to configure a unique MPLS-TP ITU-T Carrier Code (ICC) either for Ingress ID or Egress ID. This object value should be zero when sleMplsTpNodeConfigControlGlobalId are assigned with non-zero value.
                     sleMplsTpNodeCfgControlItutIcc 1.3.6.1.4.1.6296.101.16.13.1.2.8 mplsiccid read-write
This object allows the operator or service provider to configure a unique MPLS-TP ITU-T Carrier Code (ICC) either for Ingress ID or Egress ID. This object value should be zero when sleMplsTpNodeConfigControlGlobalId are assigned with non-zero value.
                     sleMplsTpNodeCfgControlNodeId 1.3.6.1.4.1.6296.101.16.13.1.2.9 ipaddress read-write
This object indicates the Node_ID within the operator.
                     sleMplsTpNodeCfgControlNodeType 1.3.6.1.4.1.6296.101.16.13.1.2.10 integer read-write
This object allows the operator or service provider to configure a unique MPLS-TP ITU-T Carrier Code (ICC) either for Ingress ID or Egress ID. This object value should be zero when msleMplsTpNodeConfigControlGlobalId are assigned with non-zero value. Enumeration: 'ietf': 1, 'itut': 2.