SENAO-WLAN-AP-MIB: View SNMP OID List / Download MIB

VENDOR: SENAO INTERNATIONAL CO.


 Home MIB: SENAO-WLAN-AP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 senaoMIB 1.3.6.1.4.1.14125
             senaoRFC1213Group 1.3.6.1.4.1.14125.1
                 ip 1.3.6.1.4.1.14125.1.1
                     ipInReceives 1.3.6.1.4.1.14125.1.1.1 counter read-only
The total number of input datagrams received from interfaces, including those received in error. @GET-FUNC=get_ip_row
                     ipForwDatagrams 1.3.6.1.4.1.14125.1.1.2 counter read-only
The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful. @GET-FUNC=get_ip_row
                 icmp 1.3.6.1.4.1.14125.1.2
                     icmpInMsgs 1.3.6.1.4.1.14125.1.2.1 counter read-only
The total number of ICMP messages which the entity received. Note that this counter includes all those counted by icmpInErrors. @GET-FUNC=get_icmp_row
                     icmpOutMsgs 1.3.6.1.4.1.14125.1.2.2 counter read-only
The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. @GET-FUNC=get_icmp_row
                 tcp 1.3.6.1.4.1.14125.1.3
                     tcpInSegs 1.3.6.1.4.1.14125.1.3.1 counter read-only
The total number of segments received, including those received in error. This count includes segments received on currently established connections. @GET-FUNC=get_tcp_row
                     tcpOutSegs 1.3.6.1.4.1.14125.1.3.2 counter read-only
The total number of segments sent, including those on current connections but excluding those containing only retransmitted octets. @GET-FUNC=get_tcp_row
                 udp 1.3.6.1.4.1.14125.1.4
                     udpInDatagrams 1.3.6.1.4.1.14125.1.4.1 counter read-only
The total number of UDP datagrams delivered to UDP users. @GET-FUNC=get_udp_row
                     udpOutDatagrams 1.3.6.1.4.1.14125.1.4.2 counter read-only
The total number of UDP datagrams sent from this entity. @GET-FUNC=get_udp_row
             statusInformationGroup 1.3.6.1.4.1.14125.2
                 connectedToSSID 1.3.6.1.4.1.14125.2.1 displaystring read-write
This attribute reflects the Service Set ID. This value may be modified by an external management entity and used by the local SME to make decisions about the Scanning process. The connectedToSSID length is limit between 1~ 32 characters. @GET-FUNC=get_statusInfo_group @SET-FUNC=set_statusInfo_group
                 usingChannel 1.3.6.1.4.1.14125.2.2 integer read-only
The operating frequency channel. Valid numbers are as defind in ISO/IEC 8802-11:1999, 15.4.6.2. @GET-FUNC=get_statusInfo_group Enumeration: 'channel11': 11, 'channel10': 10, 'channel3': 3, 'channel2': 2, 'channel1': 1, 'channel7': 7, 'channel6': 6, 'channel5': 5, 'channel4': 4, 'channel9': 9, 'channel8': 8.
                 accessPointMACAddress 1.3.6.1.4.1.14125.2.3 physaddress read-only
The MAC address of the Access Point (BSS identifier) with which the radio should Connected or Associated. @GET-FUNC=get_statusInfo_group
                 currentTransmissionRate 1.3.6.1.4.1.14125.2.4 integer read-only
The transmit bit rates operated, corresponding to data rates from 1 Mb/s to 54 Mb/s. @GET-FUNC=get_statusInfo_group
                 currentIPAddress 1.3.6.1.4.1.14125.2.5 ipaddress read-only
The IP address of this device used over its Ethernet interface in Routing mode or Bridge interface in Bridgeing mode. @GET-FUNC=get_statusInfo_group
                 currentTXPower 1.3.6.1.4.1.14125.2.6 integer read-write
The Transmit Power of this device used. @GET-FUNC=get_statusInfo_group @SET-FUNC=set_statusInfo_group Enumeration: 'high': 1, 'medium': 2, 'low': 3.
             countersGroup 1.3.6.1.4.1.14125.3
                 receivedPacketsGoodCount 1.3.6.1.4.1.14125.3.1 counter read-only
The number of good packets received on the radio interface, including unicast, broadcast and multicast packets. @GET-FUNC=get_counters_group
                 receivedPacketsBadCount 1.3.6.1.4.1.14125.3.2 counter read-only
The number of inbound bad packets of the radio interface were chosen to be discarded even though no errors had been detected to prevent their being received. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live. @GET-FUNC=get_counters_group
                 sendPacketsGoodCount 1.3.6.1.4.1.14125.3.3 counter read-only
The number of good packets transmitted on the radio interface, including unicast, broadcast and multicast packets. @GET-FUNC=get_counters_group
                 sendPacketsBadCount 1.3.6.1.4.1.14125.3.4 counter read-only
The number of outbound bad packets of the radio interface were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live. @GET-FUNC=get_counters_group
             privacySettingsGroup 1.3.6.1.4.1.14125.4
                 wepEnabled 1.3.6.1.4.1.14125.4.1 integer read-write
When this attribute is enable, it shall indicate that the IEEE 802.11 WEP mechanism is used for transmitting frames of type Data. The default value of this attribute shall be disable. @GET-FUNC=get_privacy_group @SET-FUNC=set_privacy_group Enumeration: 'enable': 2, 'disable': 1.
                 wepKeyLength 1.3.6.1.4.1.14125.4.2 integer read-write
The length of WEP key that is used for transmitting and received frames of type Data. The value of 0 denotes WEP64bit Hex. Key; 1 stands for WEP128bit Hex. Key @GET-FUNC=get_privacy_group @SET-FUNC=set_privacy_group Enumeration: 'key-128bits': 2, 'key-64bits': 1.
                 wepKeyNumber 1.3.6.1.4.1.14125.4.3 integer read-write
This attribute shall indicate the use of the first, second, third, or fourth element of the WEPDefaultKeys array when set to values of 1, 2, 3, or 4. The default value of this attribute shall be 0. @GET-FUNC=get_privacy_group @SET-FUNC=set_privacy_group Enumeration: 'wep-key4': 4, 'wep-key2': 2, 'wep-key3': 3, 'wep-key1': 1.
                 wepKey 1.3.6.1.4.1.14125.4.4 displaystring read-write
A WEP secret key value. 10 Hex. Keys for WEP 64Bits/26 Hex. Keys for WEP128Bits. @GET-FUNC=get_privacy_group @SET-FUNC=set_privacy_group
             systemSettingsGroup 1.3.6.1.4.1.14125.5
                 operationMode 1.3.6.1.4.1.14125.5.1 integer read-only
This defines the type of role of a wireless device. The device types are: Bridge(1) -- Bridge AP+WDS(2) -- Access Point+WDS @GET-FUNC=get_system_group Enumeration: 'bridge': 1, 'ap-wds': 2.
                 ipAddress 1.3.6.1.4.1.14125.5.2 ipaddress read-write
The IP address of this device used over its Ethernet interface in AP mode. The IP address must NOT to set [x.x.x.0] or [x,x.x.255]. @GET-FUNC=get_system_group @SET-FUNC=set_system_group
                 subnetMask 1.3.6.1.4.1.14125.5.3 ipaddress read-write
The IP Network mask used by the IP entity when accessing devices through any of its Ethernet interface in Routing mode or Bridge interface in Bridgeing mode. The value of subnet mask must set to 0, 128, 192, 224, 240, 248, 252, 254, 255. @GET-FUNC=get_system_group @SET-FUNC=set_system_group
                 ipGateway 1.3.6.1.4.1.14125.5.4 ipaddress read-write
The IP address of this device's Gateway. The value of IP Gateway must NOT set to 0 or 255 @GET-FUNC=get_system_group @SET-FUNC=set_system_group
                 deviceName 1.3.6.1.4.1.14125.5.5 displaystring read-write
The description name of this device. The deviceName length is limit between 1~32 characters. @GET-FUNC=get_system_group @SET-FUNC=set_system_group
                 saveReboot 1.3.6.1.4.1.14125.5.6 integer read-write
Save and Reboot System. The save Reboot value must set to 1 when you enable this function. @GET-FUNC=get_system_group @SET-FUNC=set_system_group
             webAdministratorSettingsGroup 1.3.6.1.4.1.14125.6
                 userName 1.3.6.1.4.1.14125.6.1 displaystring read-write
User Name assigned to the system for use when authenticating with Web browser. The username length limit is 15 characters. @GET-FUNC=get_webAdmin_group @SET-FUNC=set_webAdmin_group
                 password 1.3.6.1.4.1.14125.6.2 displaystring read-write
User Password assigned to the system for use when authenticating with Web browser. The password length limit is 15 characters. @GET-FUNC=get_webAdmin_group @SET-FUNC=set_webAdmin_group
             dhcpSettingsGroup 1.3.6.1.4.1.14125.7
                 dhcpEnabled 1.3.6.1.4.1.14125.7.1 integer read-write
When this attribute is enable, it shall indicate that the DHCP mechanism is used. The default value of this attribute shall be disable. @GET-FUNC=get_dhcp_group @SET-FUNC=set_dhcp_group Enumeration: 'enable': 2, 'disable': 1.
                 dhcpLeaseTimes 1.3.6.1.4.1.14125.7.2 integer read-write
The value indicates how many minutes for DHCP lease time. The value should be set between 1 and 65535. @GET-FUNC=get_dhcp_group @SET-FUNC=set_dhcp_group
                 dhcpIPAddressFrom 1.3.6.1.4.1.14125.7.3 ipaddress read-write
To set DHCP IP address range between dhcpIPAddressFrom and dhcpIPAddressTo. The IP address must NOT to set [x.x.x.0] or [x,x.x.255].And the DHCP address range must be in the LAN subnet. @GET-FUNC=get_dhcp_group @SET-FUNC=set_dhcp_group
                 dhcpIPAddressTo 1.3.6.1.4.1.14125.7.4 ipaddress read-write
To set DHCP IP address range between dhcpIPAddressFrom and dhcpIPAddressTo. The IP address must NOT to set [x.x.x.0] or [x,x.x.255].And the DHCP address range must be in the LAN subnet. @GET-FUNC=get_dhcp_group @SET-FUNC=set_dhcp_group
             wdsSettingsGroup 1.3.6.1.4.1.14125.8
                 wdsEnabled 1.3.6.1.4.1.14125.8.1 integer read-write
When this attribute is enable, it shall indicate that the WDS mechanism is used. The default value of this attribute shall be disable. @GET-FUNC=get_wds_group @SET-FUNC=set_wds_group Enumeration: 'enable': 2, 'disable': 1.
                 wdsAPMACAddress1 1.3.6.1.4.1.14125.8.2 physaddress read-write
To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group @SET-FUNC=set_wds_group
                 wdsAPMACAddress2 1.3.6.1.4.1.14125.8.3 physaddress read-write
To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group @SET-FUNC=set_wds_group
                 wdsAPMACAddress3 1.3.6.1.4.1.14125.8.4 physaddress read-write
To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group @SET-FUNC=set_wds_group
                 wdsAPMACAddress4 1.3.6.1.4.1.14125.8.5 physaddress read-write
To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group @SET-FUNC=set_wds_group
                 wdsAPMACAddress5 1.3.6.1.4.1.14125.8.6 physaddress read-write
To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group @SET-FUNC=set_wds_group
                 wdsAPMACAddress6 1.3.6.1.4.1.14125.8.7 physaddress read-write
To set the MAC address of the Access Point for WDS. The format to set as 'ABCDEF123456'. And Leave blank to disable WDS for that slot. @GET-FUNC=get_wds_group @SET-FUNC=set_wds_group
                 wdsKeyUsed 1.3.6.1.4.1.14125.8.8 integer read-only
WDS only supports None or WEP security mode. When this attribute is wep, it shall indicate that the IEEE 802.11 WEP mechanism is used for transmitting frames of type Data. The default value of this attribute shall be none. @GET-FUNC=get_wds_group Enumeration: 'none': 1, 'wep': 2.
                 wdsKeyType 1.3.6.1.4.1.14125.8.9 integer read-only
WDS only supports None or WEP security mode. The length of WEP key that is used for transmitting and received frames of type Data. The value of 2 denotes WEP64bit Hex. Key; 3 stands for WEP128bit Hex. Key @GET-FUNC=get_wds_group Enumeration: 'none': 1, 'key-128bits': 3, 'key-64bits': 2.