SDSL-STATS-MIB: View SNMP OID List / Download MIB

VENDOR: NEWBRIDGE NETWORKS CORPORATION


 Home MIB: SDSL-STATS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, SNMPv2-TC, NNCGNI0001-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 nncSdslStatistics 1.3.6.1.4.1.123.3.64
This module contains definitions for SDSL Ports Stats.
       nncSdslStatisticsObjects 1.3.6.1.4.1.123.3.64.1
           nncSdslLineStatusTable 1.3.6.1.4.1.123.3.64.1.1 no-access
Table that contains the Status of all SDSL Lines.
               nncSdslLineStatusEntry 1.3.6.1.4.1.123.3.64.1.1.1 no-access
The Status of an SDSL Line.
                   nncSdslLineStatus 1.3.6.1.4.1.123.3.64.1.1.1.1 integer read-only
Status indicates current state of the line. Unknown 0 Operational 1 Near End Loss Of Cell Delineation 2 Near End Loss Of Signal 3 Near End Loss Of Power 34
           nncSdslNearEndRawTable 1.3.6.1.4.1.123.3.64.1.2 no-access
Table that contains the Near End RAW Stats of all SDSL Ports.
               nncSdslNearEndRawEntry 1.3.6.1.4.1.123.3.64.1.2.1 no-access
The Near End Raw Stats of an SDSL Port.
                   nncSdslNearEndRawLOS 1.3.6.1.4.1.123.3.64.1.2.1.1 counter32 read-only
Count of the number of Loss of Signal failures since system reset.
                   nncSdslNearEndRawLowNM 1.3.6.1.4.1.123.3.64.1.2.1.2 counter32 read-only
Count of the number of Low Noise Margin failures since system reset.
                   nncSdslNearEndRawLPR 1.3.6.1.4.1.123.3.64.1.2.1.3 counter32 read-only
Count of the number of Loss of Power failures since system reset.
                   nncSdslNearEndRawLOCD 1.3.6.1.4.1.123.3.64.1.2.1.4 counter32 read-only
Count of the number of Loss of Cell Delineation failures since system reset.
                   nncSdslNearEndRawCRCError 1.3.6.1.4.1.123.3.64.1.2.1.5 counter32 read-only
Count of the number of CRC Errors since system reset.
           nncSdslNearEndCurr15MinTable 1.3.6.1.4.1.123.3.64.1.3 no-access
Table that contains the Near End 15 minutes current Stats of all SDSL Ports.
               nncSdslNearEndCurr15MinEntry 1.3.6.1.4.1.123.3.64.1.3.1 no-access
The Near End 15 minutes current Stats of an SDSL Port.
                   nncSdslNearEndCurr15MinTimeElapsed 1.3.6.1.4.1.123.3.64.1.3.1.1 gauge32 read-only
Total elapsed seconds in this interval. A full interval is 900 seconds.
                   nncSdslNearEndCurr15MinLOSS 1.3.6.1.4.1.123.3.64.1.3.1.2 gauge32 read-only
Count of the number of seconds in Loss of Signal status not due to a Loss of Power in the current 15 minutes interval.
                   nncSdslNearEndCurr15MinLOSWS 1.3.6.1.4.1.123.3.64.1.3.1.3 gauge32 read-only
Count of the number of seconds in Loss of Synch Word status not followed by a Loss of Signal in the current 15 minutes interval.
                   nncSdslNearEndCurr15MinLowNMS 1.3.6.1.4.1.123.3.64.1.3.1.4 gauge32 read-only
Count of the number of seconds in Low Noise Margin status in the current 15 minutes interval.
                   nncSdslNearEndCurr15MinLPRS 1.3.6.1.4.1.123.3.64.1.3.1.5 gauge32 read-only
Count of the number of seconds in Loss of Power status in the current 15 minutes interval.
                   nncSdslNearEndCurr15MinErrS 1.3.6.1.4.1.123.3.64.1.3.1.6 gauge32 read-only
Count of Errored Seconds in the current 15 minutes interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.
           nncSdslNearEndCurr1DayTable 1.3.6.1.4.1.123.3.64.1.4 no-access
Table that contains the Near End 1 Day current Stats of all SDSL Ports.
               nncSdslNearEndCurr1DayEntry 1.3.6.1.4.1.123.3.64.1.4.1 no-access
The Near End 1 Day current Stats of an SDSL Port.
                   nncSdslNearEndCurr1DayTimeElapsed 1.3.6.1.4.1.123.3.64.1.4.1.1 gauge32 read-only
Number of seconds that have elapses since the beginning of the current 1 Day interval.
                   nncSdslNearEndCurr1DayLOSS 1.3.6.1.4.1.123.3.64.1.4.1.2 gauge32 read-only
Count of the number of seconds in Loss of Signal status not due to a Loss of Power during the current day.
                   nncSdslNearEndCurr1DayLOSWS 1.3.6.1.4.1.123.3.64.1.4.1.3 gauge32 read-only
Count of the number of seconds in Loss of Synch Word status not followed by a Loss of Signal during the current day.
                   nncSdslNearEndCurr1DayLowNMS 1.3.6.1.4.1.123.3.64.1.4.1.4 gauge32 read-only
Count of the number of seconds in Low Noise Margin status during the current day.
                   nncSdslNearEndCurr1DayLPRS 1.3.6.1.4.1.123.3.64.1.4.1.5 gauge32 read-only
Count of the number of seconds in Loss of Power status during the current day.
                   nncSdslNearEndCurr1DayErrS 1.3.6.1.4.1.123.3.64.1.4.1.6 gauge32 read-only
Count of Errored Seconds during the current day. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.
           nncSdslNearEndPrev1DayTable 1.3.6.1.4.1.123.3.64.1.5 no-access
Table that contains the Near End 1 DAY PREVIOUS Stats of all SDSL Ports.
               nncSdslNearEndPrev1DayEntry 1.3.6.1.4.1.123.3.64.1.5.1 no-access
The Near End 1 Day PREVIOUS Stats of an SDSL Port.
                   nncSdslNearEndPrev1DayMoniSecs 1.3.6.1.4.1.123.3.64.1.5.1.1 gauge32 read-only
The time in the PREVIOUS 1-day interval over which the performance monitoring information is actually counted. This value will normally be the same as the total interval duration except in a situation where performance monitoring information can not be collected for any reason. Typically Elapsed 1-day Time will be copied into Monitored Seconds when the 1-day roll-over occurs.
                   nncSdslNearEndPrev1DayLOSS 1.3.6.1.4.1.123.3.64.1.5.1.2 gauge32 read-only
Count of the number of seconds in Loss of Signal status not due to a Loss of Power within the most recent PREVIOUS 1 day period.
                   nncSdslNearEndPrev1DayLOSWS 1.3.6.1.4.1.123.3.64.1.5.1.3 gauge32 read-only
Count of the number of seconds in Loss of Synch Word status not followed by a Loss of Signal within the most recent PREVIOUS 1 day period.
                   nncSdslNearEndPrev1DayLowNMS 1.3.6.1.4.1.123.3.64.1.5.1.4 gauge32 read-only
Count of the number of seconds in Low Noise Margin status within the most recent PREVIOUS 1 day period.
                   nncSdslNearEndPrev1DayLPRS 1.3.6.1.4.1.123.3.64.1.5.1.5 gauge32 read-only
Count of the number of seconds in Loss of Power status within the most recent PREVIOUS 1 day period.
                   nncSdslNearEndPrev1DayErrS 1.3.6.1.4.1.123.3.64.1.5.1.6 gauge32 read-only
Count of Errored Seconds within the most recent PREVIOUS 1 day period. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.
                   nncSdslNearEndPrev1DayValidData 1.3.6.1.4.1.123.3.64.1.5.1.7 truthvalue read-only
This variable indicates if there is valid data for this interval.
           nncSdslFarEndAllTable 1.3.6.1.4.1.123.3.64.1.6 no-access
Table that contains ALL the Far End Stats of all SDSL Ports.
               nncSdslFarEndAllEntry 1.3.6.1.4.1.123.3.64.1.6.1 no-access
ALL the Far End Stats of an SDSL Port.
                   nncSdslFarEndRawLOCD 1.3.6.1.4.1.123.3.64.1.6.1.1 counter32 read-only
Count of the number of Loss of Cell Delineation failures since system reset.
                   nncSdslFarEndCurr15MinTimeElapsed 1.3.6.1.4.1.123.3.64.1.6.1.2 gauge32 read-only
Total elapsed seconds in this interval. A full interval is 900 seconds.
                   nncSdslFarEndCurr15MinErrS 1.3.6.1.4.1.123.3.64.1.6.1.3 gauge32 read-only
Count of Errored Seconds in the current 15 minutes interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.
                   nncSdslFarEndCurr1DayTimeElapsed 1.3.6.1.4.1.123.3.64.1.6.1.4 gauge32 read-only
Number of seconds that have elapses since the beginning of the current 1 Day interval.
                   nncSdslFarEndCurr1DayErrS 1.3.6.1.4.1.123.3.64.1.6.1.5 gauge32 read-only
Count of Errored Seconds in the current 15 minutes interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.
                   nncSdslFarEndPrev1DayMoniSecs 1.3.6.1.4.1.123.3.64.1.6.1.6 gauge32 read-only
The time in the PREVIOUS 1-day interval over which the performance monitoring information is actually counted. This value will normally be the same as the total interval duration except in a situation where performance monitoring information can not be collected for any reason. Typically Elapsed 1-day Time will be copied into Monitored Seconds when the 1-day roll-over occurs.
                   nncSdslFarEndPrev1DayErrS 1.3.6.1.4.1.123.3.64.1.6.1.7 gauge32 read-only
Count of Errored Seconds within the most recent PREVIOUS 1 day period. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.
                   nncSdslFarEndPrev1DayValidData 1.3.6.1.4.1.123.3.64.1.6.1.8 truthvalue read-only
This variable indicates if there is valid data for this interval.
           nncSdslNearEndIntTable 1.3.6.1.4.1.123.3.64.1.7 no-access
Table that contains the Near End 15 Minutes Intervals Stats of all SDSL Ports.
               nncSdslNearEndIntEntry 1.3.6.1.4.1.123.3.64.1.7.1 no-access
One interval of Near End Stats of an SDSL Port.
                   nncSdslNearEndIntNumber 1.3.6.1.4.1.123.3.64.1.7.1.1 integer no-access
Performance Data Interval number. 1 is the the most recent interval; interval 96 is 24 hours ago. Interval 2..96 are optional.
                   nncSdslNearEndIntLOSS 1.3.6.1.4.1.123.3.64.1.7.1.2 gauge32 read-only
Count of seconds in the interval when there was Loss of Signal not due to a Loss of Power.
                   nncSdslNearEndIntLOSWS 1.3.6.1.4.1.123.3.64.1.7.1.3 gauge32 read-only
Count of seconds in the interval when there was Loss of Signal not folloew by Loss of Signal.
                   nncSdslNearEndIntLowNMS 1.3.6.1.4.1.123.3.64.1.7.1.4 gauge32 read-only
Count of seconds in the interval when there was Low Noise Margin.
                   nncSdslNearEndIntLPRS 1.3.6.1.4.1.123.3.64.1.7.1.5 gauge32 read-only
Count of seconds in the interval when there was Loss of Power.
                   nncSdslNearEndIntErrS 1.3.6.1.4.1.123.3.64.1.7.1.6 gauge32 read-only
Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.
                   nncSdslNearEndIntValidData 1.3.6.1.4.1.123.3.64.1.7.1.7 truthvalue read-only
This variable indicates if there is valid data for this interval.
           nncSdslFarEndIntTable 1.3.6.1.4.1.123.3.64.1.8 no-access
Table that contains the Far End 15 Minutes Intervals Stats of all SDSL Ports.
               nncSdslFarEndIntEntry 1.3.6.1.4.1.123.3.64.1.8.1 no-access
One interval of Far End Stats of an SDSL Port.
                   nncSdslFarEndIntNumber 1.3.6.1.4.1.123.3.64.1.8.1.1 integer no-access
Performance Data Interval number. 1 is the the most recent interval; interval 96 is 24 hours ago. Interval 2..96 are optional.
                   nncSdslFarEndIntErrS 1.3.6.1.4.1.123.3.64.1.8.1.2 gauge32 read-only
Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more of the anomolies or defects previously defined.
                   nncSdslFarEndIntValidData 1.3.6.1.4.1.123.3.64.1.8.1.3 truthvalue read-only
This variable indicates if there is valid data for this interval.