REMOTEACCESS-MIB: View SNMP OID List / Download MIB

VENDOR: SONIX COMMUNICATIONS


 Home MIB: REMOTEACCESS-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, RMON-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
       ppp 1.3.6.1.2.1.10.23
       tftp 1.3.6.1.2.1.16.19
             tftpFile 1.3.6.1.2.1.16.19.6 displaystring read-write
The file name to be LOADED from or STORED on the TFTP server, when a download is next requested via this MIB. This value is set to the zero length string when no file name has been specified.
             tftpServerIP 1.3.6.1.2.1.16.19.7 ipaddress read-write
The IP address of the TFTP server that contains the image to LOAD or STORE when a LOAD or STORE is next requested via this MIB. This value is set to `0.0.0.0' when no IP address has been specified.
             tftpAction 1.3.6.1.2.1.16.19.8 integer read-write
When this object is set to LOAD (2) or STORE (3), the device will discontinue its normal operation and begin loading or storing of the image specified by probeDownloadFile using the TFTP protocol. If LOAD(2) is specified, the new image is copied from the TFTP Server to the unit. If STORE(3)is specified the image is written to the TFTP Server. Enumeration: 'load': 2, 'idle': 1, 'store': 3.
             tftpStatus 1.3.6.1.2.1.16.19.9 integer read-only
The status of the last download procedure, if any. This object will have a value of StatusUnknown(2) if no LOAD or STORE process has been performed. Enumeration: 'incompatibleimage': 6, 'success': 1, 'statusunknown': 2, 'tftpaccessviolation': 8, 'checksumerror': 5, 'generalerror': 3, 'noresponsefromserver': 4, 'tftpfilenotfound': 7.
 sonix 1.3.6.1.4.1.559
         sonixMibs 1.3.6.1.4.1.559.1
             remoteaccessMib 1.3.6.1.4.1.559.1.2
                 system 1.3.6.1.4.1.559.1.2.1
                     variant 1.3.6.1.4.1.559.1.2.1.1 displaystring read-only
Product variant.
                     version 1.3.6.1.4.1.559.1.2.1.2 displaystring read-only
Product version number.
                     unitname 1.3.6.1.4.1.559.1.2.1.3 displaystring read-write
The name of the unit.
                     save 1.3.6.1.4.1.559.1.2.1.4 integer read-write
Save current configuration to NVRAM. Enumeration: 'true': 1, 'false': 0.
                     standard 1.3.6.1.4.1.559.1.2.1.5 integer read-write
Restore standard configuration, erasing NVRAM. Enumeration: 'true': 1, 'false': 0.
                     saverequired 1.3.6.1.4.1.559.1.2.1.6 integer read-only
Have changes been made which need to be save to NVRAM. Enumeration: 'true': 1, 'false': 0.
                     date 1.3.6.1.4.1.559.1.2.1.7 displaystring read-write
Real-time clock date. (Format dd/mm/yyyy).
                     time 1.3.6.1.4.1.559.1.2.1.8 displaystring read-write
Real-time clock time. (Format hh:mm:ss).
                     dayoftheweek 1.3.6.1.4.1.559.1.2.1.9 integer read-write
Real-time clock day. Enumeration: 'monday': 2, 'tuesday': 3, 'friday': 6, 'wednesday': 4, 'thursday': 5, 'sunday': 1, 'saturday': 7.
                     managertimeout 1.3.6.1.4.1.559.1.2.1.10 integer read-write
The time after which the manager will timeout if there is no activity. Set this to 0 for no timeout.
                     unitipad 1.3.6.1.4.1.559.1.2.1.11 ipaddress read-write
The Network port ip address of the unit.
                     unitmacaddress 1.3.6.1.4.1.559.1.2.1.12 macaddress read-only
The MAC address of the unit.
                     defaultalert 1.3.6.1.4.1.559.1.2.1.13 integer read-write
Alert LED action. Enumeration: 'disabled': 0, 'beep': 2, 'enabled': 1.
                     incallalert 1.3.6.1.4.1.559.1.2.1.14 integer read-write
Incoming call Alert LED action. Enumeration: 'disabled': 0, 'beep': 2, 'enabled': 1.
                     publiccommunity 1.3.6.1.4.1.559.1.2.1.15 displaystring read-write
Community for reading MIB entries. This string will not be returned, but may be set.
                     privatecommunity 1.3.6.1.4.1.559.1.2.1.16 displaystring read-write
Community for reading and writing MIB entries. This string will not be returned, but may be set.
                     trapaddress 1.3.6.1.4.1.559.1.2.1.17 ipaddress read-write
The IP Address of the default management station to which all traps will be sent.
                     trapport 1.3.6.1.4.1.559.1.2.1.18 integer read-write
The port on the default management station to which all traps will be sent.
                     lcdManagerLock 1.3.6.1.4.1.559.1.2.1.19 integer read-write
Defines whether keypad operation is allowed. Enumeration: 'disabled': 0, 'enabled': 1.
                     loopControl 1.3.6.1.4.1.559.1.2.1.20 integer read-write
When enabled Loop Control allows a physical loop to exist without causing broadcast storms by preventing frames received on one WAN/ISDN port being retransmitted on other WAN/ISDN ports (useful when using multiple ISDN circuits). Enumeration: 'disabled': 1, 'enabled': 0.
                     novelltimeout 1.3.6.1.4.1.559.1.2.1.21 integer read-write
The time after which Novell session emulation will timeout if there is no activity. Set this to 0 for no timeout.
                     timeSinceReboot 1.3.6.1.4.1.559.1.2.1.22 displaystring read-only
Time since last reboot. (Format hh:mm:ss).
                     passwdsTable 1.3.6.1.4.1.559.1.2.1.23 no-access
A table of manager passwords. In fact, only one entry in the table is allowed.
                           passwdsEntry 1.3.6.1.4.1.559.1.2.1.23.1 no-access
A list of manager passwords.
                               passwdsOld 1.3.6.1.4.1.559.1.2.1.23.1.1 displaystring read-write
The current manager password.
                               passwdsNew 1.3.6.1.4.1.559.1.2.1.23.1.2 displaystring read-write
The new manager password. To change the password, a new table entry must be added, with both the old password and the new password in the same SET. The table will always appear empty.
                     ip 1.3.6.1.4.1.559.1.2.1.25
                           iprip 1.3.6.1.4.1.559.1.2.1.25.1
                               ipInRipRequests 1.3.6.1.4.1.559.1.2.1.25.1.1 counter read-only
The number of IP RIP datagram requests received.
                               ipInRipResponses 1.3.6.1.4.1.559.1.2.1.25.1.2 counter read-only
The number of IP RIP datagram responses received.
                               ipInRipErrors 1.3.6.1.4.1.559.1.2.1.25.1.3 counter read-only
The number of IP RIP datagrams discarded due to some error other than insufficient resources.
                               ipInRipDiscards 1.3.6.1.4.1.559.1.2.1.25.1.4 counter read-only
The number of IP RIP datagrams discarded due to insufficient resources.
                               ipOutRipRequests 1.3.6.1.4.1.559.1.2.1.25.1.5 counter read-only
The number of IP RIP datagram requests transmitted.
                               ipOutRipResponses 1.3.6.1.4.1.559.1.2.1.25.1.6 counter read-only
The number of IP RIP datagram responses transmitted.
                               ipOutRipUpdates 1.3.6.1.4.1.559.1.2.1.25.1.7 counter read-only
The number of IP RIP datagrams transmitted due to the detection of a network configuration change.
                               ipOutRipErrors 1.3.6.1.4.1.559.1.2.1.25.1.8 counter read-only
The number of IP RIP datagrams discarded due to some error other than insufficient resources.
                               ipOutRipDiscards 1.3.6.1.4.1.559.1.2.1.25.1.9 counter read-only
The number of IP RIP datagrams discarded due to insufficient resources.
                               ipRoutingProtocol 1.3.6.1.4.1.559.1.2.1.25.1.10 integer read-write
The IP routing protocol used. Enumeration: 'rip2': 2, 'ripExtended': 9, 'rip': 1, 'ripFixedMask': 8.
                               ipRipLearning 1.3.6.1.4.1.559.1.2.1.25.1.11 integer read-write
When enabled the RIP Table will be updated. This is only applicable to dial-up links. Enumeration: 'disabled': 1, 'enabled': 2.
                               ipRoutingAdvertise 1.3.6.1.4.1.559.1.2.1.25.1.12 integer read-write
The interface that all rips are transmitted on. Enumeration: 'lan': 3, 'none': 1, 'all': 2.
                           ipRouteTableCopy 1.3.6.1.4.1.559.1.2.1.25.2 no-access
This entity's IP Routing table.
                               ipRouteEntryCopy 1.3.6.1.4.1.559.1.2.1.25.2.1 no-access
A route to a particular destination.
                                   ipRouteDestCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.1 ipaddress read-write
The destination IP address of this route. An entry with a value of 0.0.0.0 is considered an unnumbered route. Unnumbered routes are differentiated by their Destination Route Name entries. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.
                                   ipRouteIfIndexCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.2 integer read-only
The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                                   ipRouteMetric1Copy 1.3.6.1.4.1.559.1.2.1.25.2.1.3 integer read-write
The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
                                   ipRouteMetric2Copy 1.3.6.1.4.1.559.1.2.1.25.2.1.4 integer read-write
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
                                   ipRouteMetric3Copy 1.3.6.1.4.1.559.1.2.1.25.2.1.5 integer read-write
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
                                   ipRouteMetric4Copy 1.3.6.1.4.1.559.1.2.1.25.2.1.6 integer read-write
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
                                   ipRouteNextHopCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.7 ipaddress read-write
The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)
                                   ipRouteTypeCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.8 integer read-write
The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object. Enumeration: 'indirect': 4, 'other': 1, 'direct': 3, 'invalid': 2.
                                   ipRouteProtoCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.9 integer read-only
The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. Enumeration: 'bgp': 14, 'bbnSpfIgp': 12, 'ggp': 6, 'ospf': 13, 'egp': 5, 'rip': 8, 'es-is': 10, 'ciscoIgrp': 11, 'other': 1, 'is-is': 9, 'icmp': 4, 'local': 2, 'hello': 7, 'netmgmt': 3.
                                   ipRouteAgeCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.10 integer read-write
The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned.
                                   ipRouteMaskCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.11 ipaddress read-write
Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.
                                   ipRouteMetric5Copy 1.3.6.1.4.1.559.1.2.1.25.2.1.12 integer read-write
An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.
                                   ipRouteInfoCopy 1.3.6.1.4.1.559.1.2.1.25.2.1.13 object identifier read-only
A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.
                                   ipRouteNextHopName 1.3.6.1.4.1.559.1.2.1.25.2.1.14 displaystring read-write
A unique name for the next hop for an unnumbered route. If the IP address of the next hop is 0.0.0.0 it is taken to be the default route if this string is NULL, or an unnumbered link to the named interface if not.
                                   ipRouteAdvertise 1.3.6.1.4.1.559.1.2.1.25.2.1.15 integer read-write
Whether or not this route should be advertised Enumeration: 'enable': 1, 'disable': 0.
                     ipx 1.3.6.1.4.1.559.1.2.1.26
                           ipxInReceives 1.3.6.1.4.1.559.1.2.1.26.1 counter read-only
The number of IPX datagrams received on all interfaces including those received in error.
                           ipxInDelivers 1.3.6.1.4.1.559.1.2.1.26.2 counter read-only
The number of IPX datagrams delivered to this management entity.
                           ipxInDiscards 1.3.6.1.4.1.559.1.2.1.26.3 counter read-only
The number of IPX datagrams discarded due to insufficient resources.
                           ipxInUnknownProtocols 1.3.6.1.4.1.559.1.2.1.26.4 counter read-only
The number of IPX datagrams discardrd due to unknown or unsupported protocols.
                           ipxInHeaderErrors 1.3.6.1.4.1.559.1.2.1.26.5 counter read-only
The number of IPX datagrams recieved and discarded due to errors detected in the IPX header.
                           ipxForwardDatagrams 1.3.6.1.4.1.559.1.2.1.26.6 counter read-only
The number of received IPX datagrams not addressed to the IPX Router, which the router will attempt to forward.
                           ipxOutRequests 1.3.6.1.4.1.559.1.2.1.26.7 counter read-only
The number of datagrams supplied to IPX by local user protocols.
                           ipxOutNoRoutes 1.3.6.1.4.1.559.1.2.1.26.8 counter read-only
The number of datagrams discarded because no route could be found to transmit them to their destination.
                           ipxOutDiscards 1.3.6.1.4.1.559.1.2.1.26.9 counter read-only
The number of IPX datagrams discarded because no resource could be found to allow transmission.
                           ipxForwarding 1.3.6.1.4.1.559.1.2.1.26.10 integer read-write
The indication as to whether this entity is acting as a Router. Enumeration: 'forwarding': 2, 'not-forwarding': 1.
                           ipxrip 1.3.6.1.4.1.559.1.2.1.26.11
                                 ipxInRipRequests 1.3.6.1.4.1.559.1.2.1.26.11.1 counter read-only
The number of IPX RIP datagram requests received.
                                 ipxInRipResponses 1.3.6.1.4.1.559.1.2.1.26.11.2 counter read-only
The number of IPX RIP datagram responses received.
                                 ipxInRipErrors 1.3.6.1.4.1.559.1.2.1.26.11.3 counter read-only
The number of IPX RIP datagrams discarded due to some error other than insufficient resources.
                                 ipxInRipTimeouts 1.3.6.1.4.1.559.1.2.1.26.11.4 counter read-only
The number of times IPX RIP datagrams have been expected but have not been received.
                                 ipxInRipDiscards 1.3.6.1.4.1.559.1.2.1.26.11.5 counter read-only
The number of IPX RIP datagrams discarded due to insufficient resources.
                                 ipxOutRipRequests 1.3.6.1.4.1.559.1.2.1.26.11.6 counter read-only
The number of IPX RIP datagram requests transmitted.
                                 ipxOutRipResponses 1.3.6.1.4.1.559.1.2.1.26.11.7 counter read-only
The number of IPX RIP datagram responses transmitted.
                                 ipxOutRipUpdates 1.3.6.1.4.1.559.1.2.1.26.11.8 counter read-only
The number of IPX RIP datagrams transmitted due to the detection of a network configuration change.
                                 ipxOutRipErrors 1.3.6.1.4.1.559.1.2.1.26.11.9 counter read-only
The number of IPX RIP datagrams discarded due to some error other than insufficient resources.
                                 ipxOutRipDiscards 1.3.6.1.4.1.559.1.2.1.26.11.10 counter read-only
The number of IPX RIP datagrams discarded due to insufficient resources.
                           ipxrt 1.3.6.1.4.1.559.1.2.1.26.12
                                 ipxRoutingTable 1.3.6.1.4.1.559.1.2.1.26.12.1 no-access
The IPX Routing Table.
                                     ipxRoutingTableEntry 1.3.6.1.4.1.559.1.2.1.26.12.1.1 no-access
Information about a routing table entry.
                                         ipxRouteTarget 1.3.6.1.4.1.559.1.2.1.26.12.1.1.1 octet string read-only
The IPX network number of the destination network.
                                         ipxRouteHopCount 1.3.6.1.4.1.559.1.2.1.26.12.1.1.2 integer read-write
The number of hops necessary to reach the destination network. This count includes the additional count required to reach the destination network through this route.
                                         ipxRouteTicks 1.3.6.1.4.1.559.1.2.1.26.12.1.1.3 integer read-write
The delay in ticks to reach the destination network. This count includes the additional count required to reach the destination network through this route.
                                         ipxRouteNextHopNetwork 1.3.6.1.4.1.559.1.2.1.26.12.1.1.4 octet string read-write
The IPX Network Address of the next route on the path to the target network.
                                         ipxRouteNextHopNode 1.3.6.1.4.1.559.1.2.1.26.12.1.1.5 macaddress read-write
The IPX Node Address of the next router on the path to the target network.
                                         ipxRouteType 1.3.6.1.4.1.559.1.2.1.26.12.1.1.6 integer read-write
Identifies the source of the learnt entry: remote - from the WAN. local - from the LAN. alternate - identifies an entry specifying an alternate, but less desireable route to a known destintion. equal - identifies an entry specifying an alternative route to a known destination. autocall - from the ISDN Autocall table. permanent - identifies a permanent entry. The only valid set request is to make a route permanent. Enumeration: 'remote': 1, 'autocall': 5, 'alternate': 3, 'equal': 4, 'permanent': 6, 'local': 2.
                                         ipxRoutePort 1.3.6.1.4.1.559.1.2.1.26.12.1.1.7 displaystring read-only
The name of the logical port through which IPX datagrams will be forwarded towards the destination network.
                                         ipxRouteLinkType 1.3.6.1.4.1.559.1.2.1.26.12.1.1.8 integer read-write
The link protocol of the logical port through which IPX datagrams will be forwarded towards the destination network. Enumeration: 'ppp': 1, 'hdlc': 2.
                                         ipxRouteIpxType 1.3.6.1.4.1.559.1.2.1.26.12.1.1.9 integer read-write
The frame type for IPX RIP messages. Enumeration: 'snap': 4, 'novell802dot3': 3, 'ieee802dot2': 2, 'ethernetII': 1.
                                         ipxRouteLinkTicks 1.3.6.1.4.1.559.1.2.1.26.12.1.1.10 integer read-write
The additional count required to reach the destination network through this route.
                                         ipxRouteMlink 1.3.6.1.4.1.559.1.2.1.26.12.1.1.11 displaystring read-write
The MLINK through which datagrams will be forwarded towards the destination network.
                                         ipxRouteMode 1.3.6.1.4.1.559.1.2.1.26.12.1.1.12 integer read-write
The Operation Required Enumeration: 'delete': 1.
                           ipxsap 1.3.6.1.4.1.559.1.2.1.26.13
                                 ipxInSapRequests 1.3.6.1.4.1.559.1.2.1.26.13.1 counter read-only
The number of IPX SAP datagram updates received.
                                 ipxInSapResponses 1.3.6.1.4.1.559.1.2.1.26.13.2 counter read-only
The number of IPX SAP datagram queries received.
                                 ipxInSapNoServers 1.3.6.1.4.1.559.1.2.1.26.13.3 counter read-only
The number of IPX datagrams received indicating that no Servers are available.
                                 ipxInSapErrors 1.3.6.1.4.1.559.1.2.1.26.13.4 counter read-only
The number of IPX SAP datagrams discarded due to some error other than insufficient resources.
                                 ipxInSapDiscards 1.3.6.1.4.1.559.1.2.1.26.13.5 counter read-only
The number of IPX SAP datagrams discarded due to insufficient resources.
                                 ipxOutSapRequests 1.3.6.1.4.1.559.1.2.1.26.13.6 counter read-only
The number of IPX SAP datagram updates transmitted.
                                 ipxOutSapResponses 1.3.6.1.4.1.559.1.2.1.26.13.7 counter read-only
The number of IPX SAP datagram replies transmitted.
                                 ipxOutSapErrors 1.3.6.1.4.1.559.1.2.1.26.13.8 counter read-only
The number of IPX SAP datagrams discarded due to some error other than insufficient resources.
                                 ipxOutSapDiscards 1.3.6.1.4.1.559.1.2.1.26.13.9 counter read-only
The number of IPX SAP datagrams discarded due to insufficient resources.
                           ipxsapt 1.3.6.1.4.1.559.1.2.1.26.14
                                 ipxServicesTable 1.3.6.1.4.1.559.1.2.1.26.14.1 no-access
The IPX Services Table.
                                     ipxServicesTableEntry 1.3.6.1.4.1.559.1.2.1.26.14.1.1 no-access
Information about a services table entry.
                                         ipxServiceNetwork 1.3.6.1.4.1.559.1.2.1.26.14.1.1.1 octet string read-write
The IPX network number portion of the IPX Address of this server.
                                         ipxServiceNode 1.3.6.1.4.1.559.1.2.1.26.14.1.1.2 macaddress read-only
The IPX node number portion of the IPX Address of this server.
                                         ipxServiceSocket 1.3.6.1.4.1.559.1.2.1.26.14.1.1.3 integer read-only
The IPX socket through which this server is advertising.
                                         ipxServiceName 1.3.6.1.4.1.559.1.2.1.26.14.1.1.4 displaystring read-write
The name of this server.
                                         ipxServiceType 1.3.6.1.4.1.559.1.2.1.26.14.1.1.5 integer read-write
The type of service offered by this server.
                                         ipxServiceHopCount 1.3.6.1.4.1.559.1.2.1.26.14.1.1.6 integer read-write
The number of hops necessary to reach this server. This count will include the additional count required to reach the server through this route.
                                         ipxServicePort 1.3.6.1.4.1.559.1.2.1.26.14.1.1.7 displaystring read-only
The name of the logical port through which the server is reachable.
                                         ipxServiceNextHopNetwork 1.3.6.1.4.1.559.1.2.1.26.14.1.1.8 octet string read-write
The IPX Network Address of the next route on the path to the target network.
                                         ipxServiceNextHopNode 1.3.6.1.4.1.559.1.2.1.26.14.1.1.9 macaddress read-write
The IPX Node Address of the next router on the path to the target network.
                                         ipxServiceIpxType 1.3.6.1.4.1.559.1.2.1.26.14.1.1.10 integer read-write
The frame type for IPX SAP messages. Enumeration: 'snap': 4, 'novell802dot3': 3, 'ieee802dot2': 2, 'ethernetII': 1.
                                         ipxServiceRTType 1.3.6.1.4.1.559.1.2.1.26.14.1.1.11 integer read-write
Identifies the source of the learnt entry: remote - from the WAN. local - from the LAN. alternate - identifies an entry specifying an alternate, but less desireable route to a known destintion. equal - identifies an entry specifying an alternative route to a known destination. autocall - from the ISDN Autocall table. permanent - identifies a permanent entry. The only valid set request is to make an entry permanent. Enumeration: 'remote': 1, 'autocall': 5, 'alternate': 3, 'equal': 4, 'permanent': 6, 'local': 2.
                                         ipxServiceLinkType 1.3.6.1.4.1.559.1.2.1.26.14.1.1.12 integer read-write
The link protocol of the logical port through which IPX datagrams will be forwarded towards the destination network. Enumeration: 'ppp': 1, 'hdlc': 2.
                                         ipxServiceMlink 1.3.6.1.4.1.559.1.2.1.26.14.1.1.13 displaystring read-write
The MLINK through which datagrams will be forwarded towards the destination network.
                                         ipxServiceMode 1.3.6.1.4.1.559.1.2.1.26.14.1.1.14 integer read-write
The Operation Required Enumeration: 'delete': 1.
                           ipxnear 1.3.6.1.4.1.559.1.2.1.26.15
                                 ipxNearest 1.3.6.1.4.1.559.1.2.1.26.15.1 integer read-write
The indication as to whether the Nearest Servers list is inclusive or exclusive. Enumeration: 'exclusive': 2, 'inclusive': 1.
                                 ipxNearestTable 1.3.6.1.4.1.559.1.2.1.26.15.2 no-access
The IPX Nearest Table.
                                     ipxNearestTableEntry 1.3.6.1.4.1.559.1.2.1.26.15.2.1 no-access
Information about a services table entry.
                                         ipxNearestIndex 1.3.6.1.4.1.559.1.2.1.26.15.2.1.1 integer read-write
The index of this entry.
                                         ipxNearestServer 1.3.6.1.4.1.559.1.2.1.26.15.2.1.2 displaystring read-write
The IPX servers in the IPX Nearest table.
                                         ipxNearestMode 1.3.6.1.4.1.559.1.2.1.26.15.2.1.3 integer read-write
The Operation Required Enumeration: 'delete': 1.
                     pppext 1.3.6.1.4.1.559.1.2.1.27
                           pppExtLcpConfigTable 1.3.6.1.4.1.559.1.2.1.27.1 no-access
The PPP Extended LCP Table
                               pppExtLcpConfigTableEntry 1.3.6.1.4.1.559.1.2.1.27.1.1 no-access
Information about a LCP extension table entry.
                                   pppExtLcpLocalProtocolCompression 1.3.6.1.4.1.559.1.2.1.27.1.1.1 integer read-write
LCP Protocol Compression Enumeration: 'enable': 1, 'disable': 2.
                                   pppExtLcpLocalAddressCompression 1.3.6.1.4.1.559.1.2.1.27.1.1.2 integer read-write
LCP Address Compression Enumeration: 'enable': 1, 'disable': 2.
                                   pppExtLcpRemoteMRU 1.3.6.1.4.1.559.1.2.1.27.1.1.3 integer read-write
LCP Remote MRU
                                   pppExtLcpRemoteProtocolCompression 1.3.6.1.4.1.559.1.2.1.27.1.1.4 integer read-write
LCP Protocol Compression Enumeration: 'enable': 1, 'disable': 2.
                                   pppExtLcpRemoteAddressCompression 1.3.6.1.4.1.559.1.2.1.27.1.1.5 integer read-write
LCP Address Compression Enumeration: 'enable': 1, 'disable': 2.
                                   pppExtLcpMinimumRestartPeriod 1.3.6.1.4.1.559.1.2.1.27.1.1.6 integer read-write
Minimum Restart Period
                                   pppExtLcpMaximumRestartPeriod 1.3.6.1.4.1.559.1.2.1.27.1.1.7 integer read-write
Maximum Restart Period
                                   pppExtLcpMaximumTerminateRequests 1.3.6.1.4.1.559.1.2.1.27.1.1.8 integer read-write
Maximum Terminate Requests
                                   pppExtLcpMaximumConfigRequests 1.3.6.1.4.1.559.1.2.1.27.1.1.9 integer read-write
Maximum Configure Requests
                                   pppExtLcpMaximumConfigNaks 1.3.6.1.4.1.559.1.2.1.27.1.1.10 integer read-write
Maximum Configure Naks
                                   pppExtLcpLocalMRU 1.3.6.1.4.1.559.1.2.1.27.1.1.11 integer read-write
LCP Local MRU
                                   pppExtLcpLocalMagic 1.3.6.1.4.1.559.1.2.1.27.1.1.12 integer read-write
LCP Local Magic Number Enumeration: 'enable': 1, 'disable': 2.
                                   pppExtLcpRemoteMagic 1.3.6.1.4.1.559.1.2.1.27.1.1.13 integer read-write
LCP Remote Magic Number Enumeration: 'enable': 1, 'disable': 2.
                                   pppExtLcpLocalMRUEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.14 integer read-write
LCP Local MRU Enabled Enumeration: 'enable': 1, 'disable': 2.
                                   pppExtLcpRemoteMRUEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.15 integer read-write
LCP Remote MRU Enabled Enumeration: 'enable': 1, 'disable': 2.
                                   pppExtLcpLocalACCM 1.3.6.1.4.1.559.1.2.1.27.1.1.16 integer read-write
LCP Local Accm
                                   pppExtLcpRemoteACCM 1.3.6.1.4.1.559.1.2.1.27.1.1.17 integer read-write
LCP Remote Accm
                                   pppExtLcpLocalACCMEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.18 integer read-write
LCP Local Accm Enabled
                                   pppExtLcpRemoteACCMEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.19 integer read-write
LCP Remote Accm Enabled
                                   pppExtLcpLocalPAPEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.20 integer read-write
LCP Local PAP Enabled Enumeration: 'enable': 1, 'incoming': 3, 'disable': 2.
                                   pppExtLcpRemotePAPEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.21 integer read-write
LCP Remote PAP Enabled Enumeration: 'enable': 1, 'disable': 2.
                                   pppExtLcpLocalCHAPEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.22 integer read-write
LCP Local CHAP Enabled
                                   pppExtLcpRemoteCHAPEnabled 1.3.6.1.4.1.559.1.2.1.27.1.1.23 integer read-write
LCP Remote CHAP Enabled
                           pppEchoConfigTable 1.3.6.1.4.1.559.1.2.1.27.2 no-access
The PPP LCP Echo Table
                               pppEchoConfigTableEntry 1.3.6.1.4.1.559.1.2.1.27.2.1 no-access
Information about a LCP Echo table entry.
                                   pppEchoPeriod 1.3.6.1.4.1.559.1.2.1.27.2.1.1 integer read-write
LCP Echo Period
                                   pppEchoMaxNumberRetransmits 1.3.6.1.4.1.559.1.2.1.27.2.1.2 integer read-write
Maximum number LCP Echos sent with reply before link is closed. Zero disables echos.
                           pppIpcpConfigTable 1.3.6.1.4.1.559.1.2.1.27.3 no-access
The PPP IPCP Config Table
                               pppIpcpConfigTableEntry 1.3.6.1.4.1.559.1.2.1.27.3.1 no-access
Information about a IPCP table entry.
                                   ipcpLocalIPAddressNegotiation 1.3.6.1.4.1.559.1.2.1.27.3.1.1 integer read-write
IPCP Local IP Address Negotiation Mask Enumeration: 'default': 3, 'enable': 1, 'disable': 2.
                                   ipcpRemoteIPAddressNegotiation 1.3.6.1.4.1.559.1.2.1.27.3.1.2 integer read-write
IPCP Remote IP Address Negotiation Mask Enumeration: 'default': 3, 'enable': 1, 'disable': 2.
                                   ipcpRemoteCompressionNegotiation 1.3.6.1.4.1.559.1.2.1.27.3.1.3 integer read-write
IPCP Remote Compression Protocol Enumeration: 'default': 3, 'none': 1, 'van-jacobson': 2.
                                   ipcpMinimumRestartPeriod 1.3.6.1.4.1.559.1.2.1.27.3.1.4 integer read-write
Minimum Restart Period
                                   ipcpMaximumRestartPeriod 1.3.6.1.4.1.559.1.2.1.27.3.1.5 integer read-write
Maximum Restart Period
                                   ipcpMaximumTerminateRequests 1.3.6.1.4.1.559.1.2.1.27.3.1.6 integer read-write
Maximum Terminate Requests
                                   ipcpMaximumConfigRequests 1.3.6.1.4.1.559.1.2.1.27.3.1.7 integer read-write
Maximum Configure Requests
                                   ipcpMaximumConfigNaks 1.3.6.1.4.1.559.1.2.1.27.3.1.8 integer read-write
Maximum Configure Naks
                                   ipcpLocalCompressionNegotiation 1.3.6.1.4.1.559.1.2.1.27.3.1.9 integer read-write
IPCP Local Compression Protocol Enumeration: 'default': 3, 'none': 1, 'van-jacobson': 2.
                                   ipcpRfc1172Negotiation 1.3.6.1.4.1.559.1.2.1.27.3.1.10 integer read-write
IPCP RFC1172 Negotiation Enumeration: 'default': 3, 'enable': 1, 'disable': 2.
                           pppIpxcpConfigTable 1.3.6.1.4.1.559.1.2.1.27.4 no-access
The PPP IPXCP Config Table
                               pppIpxcpConfigTableEntry 1.3.6.1.4.1.559.1.2.1.27.4.1 no-access
Information about a IPXCP table entry.
                                   ipxcpLocalNetworkNumberNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.1 integer read-write
IPXCP Local Network Number Negotiation Mask Enumeration: 'default': 3, 'enable': 1, 'disable': 2.
                                   ipxcpLocalNodeNumberNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.2 integer read-write
IPXCP Local Node Number Negotiation Mask Enumeration: 'default': 3, 'enable': 1, 'disable': 2.
                                   ipxcpLocalRoutingProtocolNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.3 integer read-write
IPXCP Local Routing Protocol Negotiation Mask Enumeration: 'default': 4, 'none': 1, 'rip-sap': 2, 'any': 3.
                                   ipxcpLocalRouterNameNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.4 integer read-write
IPXCP Local Router Name Negotiation Mask Enumeration: 'default': 3, 'enable': 1, 'disable': 2.
                                   ipxcpRemoteNetworkNumberNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.5 integer read-write
IPXCP Remote Network Number Negotiation Mask Enumeration: 'default': 3, 'enable': 1, 'disable': 2.
                                   ipxcpRemoteNodeNumberNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.6 integer read-write
IPXCP Remote Node Number Negotiation Mask Enumeration: 'default': 3, 'enable': 1, 'disable': 2.
                                   ipxcpRemoteRoutingProtocolNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.7 integer read-write
IPXCP Remote Routing Protocol Negotiation Mask Enumeration: 'default': 4, 'none': 1, 'rip-sap': 2, 'any': 3.
                                   ipxcpRemoteRouterNameNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.8 integer read-write
IPXCP Remote Router Name Negotiation Mask Enumeration: 'default': 3, 'enable': 1, 'disable': 2.
                                   ipxcpConfigCompleteNegotiation 1.3.6.1.4.1.559.1.2.1.27.4.1.9 integer read-write
IPXCP Configure Complete Negotiation Mask Enumeration: 'default': 3, 'enable': 1, 'disable': 2.
                                   ipxcpAdmin 1.3.6.1.4.1.559.1.2.1.27.4.1.10 integer read-write
IPXCP Admin Status. Inject OPEN or CLOSE event into the IPXCP state machine. Enumeration: 'opened': 1, 'closed': 2.
                                   ipxcpMinimumRestartPeriod 1.3.6.1.4.1.559.1.2.1.27.4.1.11 integer read-write
Minimum Restart Period
                                   ipxcpMaximumRestartPeriod 1.3.6.1.4.1.559.1.2.1.27.4.1.12 integer read-write
Maximum Restart Period
                                   ipxcpMaximumTerminateRequests 1.3.6.1.4.1.559.1.2.1.27.4.1.13 integer read-write
Maximum Terminate Requests
                                   ipxcpMaximumConfigRequests 1.3.6.1.4.1.559.1.2.1.27.4.1.14 integer read-write
Maximum Configure Requests
                                   ipxcpMaximumConfigNaks 1.3.6.1.4.1.559.1.2.1.27.4.1.15 integer read-write
Maximum Configure Naks
                                   ipxcpNodeNumber 1.3.6.1.4.1.559.1.2.1.27.4.1.16 macaddress read-write
The MAC address of the local node.
                           pppExtConfigTable 1.3.6.1.4.1.559.1.2.1.27.5 no-access
The PPP Ext Config Table
                               pppExtConfigTableEntry 1.3.6.1.4.1.559.1.2.1.27.5.1 no-access
Information about a PPP Ext table entry.
                                   pppExtLinkAuthentication 1.3.6.1.4.1.559.1.2.1.27.5.1.1 integer read-write
Link Authentication. Enumeration: 'disabled': 2, 'enabled': 1.
                                   pppExtEnableIp 1.3.6.1.4.1.559.1.2.1.27.5.1.2 integer read-write
Pass IP frames over the link. Enumeration: 'disabled': 2, 'enabled': 1.
                                   pppExtEnableIpx 1.3.6.1.4.1.559.1.2.1.27.5.1.3 integer read-write
Pass IPX frames over the link. Enumeration: 'disabled': 2, 'enabled': 1.
                                   pppExtHdlcLayer 1.3.6.1.4.1.559.1.2.1.27.5.1.4 integer read-write
The HDLC link type. Enumeration: 'lapb': 2, 'synchronous': 1.
                     firewall 1.3.6.1.4.1.559.1.2.1.28
                           ipFirewallStatusTable 1.3.6.1.4.1.559.1.2.1.28.1 no-access
The IP Firewall Status Table
                               ipFirewallStatusTableEntry 1.3.6.1.4.1.559.1.2.1.28.1.1 no-access
Information about an IP firewall status table entry.
                                   ipFirewallStatusIndex 1.3.6.1.4.1.559.1.2.1.28.1.1.1 integer read-only
Index
                                   ipFirewallFilteredPackets 1.3.6.1.4.1.559.1.2.1.28.1.1.2 counter read-only
The number of packets matching this entry
                           ipFirewallConfigTable 1.3.6.1.4.1.559.1.2.1.28.2 no-access
The IP Firewall Table
                               ipFirewallConfigTableEntry 1.3.6.1.4.1.559.1.2.1.28.2.1 no-access
Information about an IP firewall table entry.
                                   ipFirewallConfigIndex 1.3.6.1.4.1.559.1.2.1.28.2.1.1 integer read-only
Index
                                   ipFirewallSourceAddress 1.3.6.1.4.1.559.1.2.1.28.2.1.2 ipaddress read-write
The IP Firewall Source Address
                                   ipFirewallSourceMask 1.3.6.1.4.1.559.1.2.1.28.2.1.3 ipaddress read-write
The IP Firewall Source Mask
                                   ipFirewallLowerSourcePort 1.3.6.1.4.1.559.1.2.1.28.2.1.4 integer read-write
The Source port or the lower number of a range of source ports.
                                   ipFirewallHigherSourcePort 1.3.6.1.4.1.559.1.2.1.28.2.1.5 integer read-write
The upper number of a range of source ports.
                                   ipFirewallDestinationAddress 1.3.6.1.4.1.559.1.2.1.28.2.1.6 ipaddress read-write
The IP Firewall Destination Address
                                   ipFirewallDestinationMask 1.3.6.1.4.1.559.1.2.1.28.2.1.7 ipaddress read-write
The IP Firewall Destination Mask
                                   ipFirewallLowerDestinationPort 1.3.6.1.4.1.559.1.2.1.28.2.1.8 integer read-write
The Destination port or the lower number of a range of destination ports.
                                   ipFirewallHigherDestinationPort 1.3.6.1.4.1.559.1.2.1.28.2.1.9 integer read-write
The upper number of a range of destination ports.
                                   ipFirewallRouterName 1.3.6.1.4.1.559.1.2.1.28.2.1.10 displaystring read-write
The Router name to which frames are forwarded.
                                   ipFirewallMode 1.3.6.1.4.1.559.1.2.1.28.2.1.11 integer read-write
The Operation Required Enumeration: 'edit': 4, 'insert': 2, 'append': 3, 'delete': 1.
                                   ipFirewallType 1.3.6.1.4.1.559.1.2.1.28.2.1.12 integer read-write
The type of filtering required Enumeration: 'none': 1, 'icmp': 5, 'udp': 4, 'all': 2, 'tcp': 3.
                                   ipFirewallAction 1.3.6.1.4.1.559.1.2.1.28.2.1.13 integer read-write
Accept or Deny the frame Enumeration: 'deny': 2, 'accept': 1.
                                   ipFirewallBidir 1.3.6.1.4.1.559.1.2.1.28.2.1.14 integer read-write
Apply to bidirectional traffic Enumeration: 'enable': 1, 'disable': 2.
                                   ipFirewallTcpsyn 1.3.6.1.4.1.559.1.2.1.28.2.1.15 integer read-write
Enable TCP SYN Enumeration: 'enable': 1, 'disable': 2.
                           ipxFirewallStatusTable 1.3.6.1.4.1.559.1.2.1.28.3 no-access
The IPX Firewall Status Table
                               ipxFirewallStatusTableEntry 1.3.6.1.4.1.559.1.2.1.28.3.1 no-access
Information about an IPX firewall status table entry.
                                   ipxFirewallStatusIndex 1.3.6.1.4.1.559.1.2.1.28.3.1.1 integer read-only
Index
                                   ipxFirewallFilteredPackets 1.3.6.1.4.1.559.1.2.1.28.3.1.2 counter read-only
The number of packets matching this entry
                           ipxFirewallConfigTable 1.3.6.1.4.1.559.1.2.1.28.4 no-access
The IPX Firewall Table
                               ipxFirewallConfigTableEntry 1.3.6.1.4.1.559.1.2.1.28.4.1 no-access
Information about an IPX firewall table entry.
                                   ipxFirewallConfigIndex 1.3.6.1.4.1.559.1.2.1.28.4.1.1 integer read-only
Index
                                   ipxFirewallLowerSourceNetwork 1.3.6.1.4.1.559.1.2.1.28.4.1.2 octet string read-write
The IPX Firewall source network number or the lower number of a range of source networks.
                                   ipxFirewallHigherSourceNetwork 1.3.6.1.4.1.559.1.2.1.28.4.1.3 octet string read-write
The upper network number of a range of source networks.
                                   ipxFirewallLowerSourceNode 1.3.6.1.4.1.559.1.2.1.28.4.1.4 macaddress read-write
The IPX Firewall source node number or the lower number of a range of source nodes.
                                   ipxFirewallHigherSourceNode 1.3.6.1.4.1.559.1.2.1.28.4.1.5 macaddress read-write
The upper node number of a range of source nodes.
                                   ipxFirewallLowerSourceSocket 1.3.6.1.4.1.559.1.2.1.28.4.1.6 octet string read-write
The IPX Firewall source socket number or the lower number of a range of source sockets.
                                   ipxFirewallHigherSourceSocket 1.3.6.1.4.1.559.1.2.1.28.4.1.7 octet string read-write
The upper socket number of a range of source sockets.
                                   ipxFirewallLowerDestinationNetwork 1.3.6.1.4.1.559.1.2.1.28.4.1.8 octet string read-write
The IPX Firewall destination network number or the lower number of a range of destination networks.
                                   ipxFirewallHigherDestinationNetwork 1.3.6.1.4.1.559.1.2.1.28.4.1.9 octet string read-write
The upper network number of a range of destination networks.
                                   ipxFirewallLowerDestinationNode 1.3.6.1.4.1.559.1.2.1.28.4.1.10 macaddress read-write
The IPX Firewall destination node number or the lower number of a range of destination nodes.
                                   ipxFirewallHigherDestinationNode 1.3.6.1.4.1.559.1.2.1.28.4.1.11 macaddress read-write
The upper node number of a range of destination nodes.
                                   ipxFirewallLowerDestinationSocket 1.3.6.1.4.1.559.1.2.1.28.4.1.12 octet string read-write
The IPX Firewall destination socket number or the lower number of a range of destination sockets.
                                   ipxFirewallHigherDestinationSocket 1.3.6.1.4.1.559.1.2.1.28.4.1.13 octet string read-write
The upper socket number of a range of destination sockets.
                                   ipxFirewallRouterName 1.3.6.1.4.1.559.1.2.1.28.4.1.14 displaystring read-write
The Router name to which frames are forwarded.
                                   ipxFirewallMode 1.3.6.1.4.1.559.1.2.1.28.4.1.15 integer read-write
The Operation Required Enumeration: 'edit': 4, 'insert': 2, 'append': 3, 'delete': 1.
                                   ipxFirewallAction 1.3.6.1.4.1.559.1.2.1.28.4.1.16 integer read-write
Accept or Deny the frame Enumeration: 'deny': 2, 'accept': 1.
                                   ipxFirewallBidir 1.3.6.1.4.1.559.1.2.1.28.4.1.17 integer read-write
Apply to bidirectional traffic Enumeration: 'enable': 1, 'disable': 2.
                     users 1.3.6.1.4.1.559.1.2.1.29
                           usercfgTable 1.3.6.1.4.1.559.1.2.1.29.1 no-access
A table of users which are allowed to use this router.
                               usercfgEntry 1.3.6.1.4.1.559.1.2.1.29.1.1 no-access
A list of users.
                                   usercfgIndex 1.3.6.1.4.1.559.1.2.1.29.1.1.1 integer read-only
Index
                                   usercfgName 1.3.6.1.4.1.559.1.2.1.29.1.1.2 displaystring read-write
The user name.
                                   usercfgMac 1.3.6.1.4.1.559.1.2.1.29.1.1.3 macaddress read-write
The MAC address.
                                   usercfgAllowed 1.3.6.1.4.1.559.1.2.1.29.1.1.4 integer read-write
Make user active Enumeration: 'enable': 1, 'disable': 2.
                                   usercfgMode 1.3.6.1.4.1.559.1.2.1.29.1.1.5 integer read-write
The Operation Required Enumeration: 'edit': 4, 'delete': 1.
                     srcEnabled 1.3.6.1.4.1.559.1.2.1.30 integer read-write
Flag to enabled or disabled Scaleable Router Clustering. Enumeration: 'disabled': 0, 'enabled': 1.
                     srcPriority 1.3.6.1.4.1.559.1.2.1.31 integer read-write
Object used to manually set a device to be a Master or Slave device as part of Scaleable Router Clustering. Enumeration: 'slave': 200, 'primary': 50, 'secondary': 128.
                     ipnat 1.3.6.1.4.1.559.1.2.1.32
                           ipNatTranslate 1.3.6.1.4.1.559.1.2.1.32.1 integer read-write
Network address translation. Enumeration: 'enable': 1, 'disable': 0.
                           ipNatIpAddress 1.3.6.1.4.1.559.1.2.1.32.2 ipaddress read-write
The IP address which the network should masquerade as.
                           ipNatBogusNetwork 1.3.6.1.4.1.559.1.2.1.32.3 ipaddress read-write
The IP network whose addresses are to be translated.
                           ipNatBogusNetmask 1.3.6.1.4.1.559.1.2.1.32.4 ipaddress read-write
The netmask of the IP network whose address are to be translated.
                           ipNatTcpFinTimeout 1.3.6.1.4.1.559.1.2.1.32.5 integer read-write
The timeout period in seconds for NAT sessions using TCP which have been closed, but for which no Finis packet has been received.
                           ipNatTcpInactiveTimeout 1.3.6.1.4.1.559.1.2.1.32.6 integer read-write
The timeout period in seconds for NAT sessions using TCP.
                           ipNatUdpTimeout 1.3.6.1.4.1.559.1.2.1.32.7 integer read-write
The maximum duration in seconds for a NAT session using UDP.
                           ipNatMyself 1.3.6.1.4.1.559.1.2.1.32.8 integer read-write
Translation packets to unit's management address?. Enumeration: 'enable': 1, 'disable': 0.
                     dhcpserver 1.3.6.1.4.1.559.1.2.1.33
                           dhcpAutoStatus 1.3.6.1.4.1.559.1.2.1.33.1 integer read-write
If enabled, DHCP Server will allocate addresses. Also, if enabled, DHCP Proxy and DHCP Relay will silently be disabled. Enumeration: 'disabled': 0, 'enabled': 1.
                           dhcpAutoName 1.3.6.1.4.1.559.1.2.1.33.2 displaystring read-write
The stem of hostnames to be allocated.
                           dhcpAutoDomain 1.3.6.1.4.1.559.1.2.1.33.3 displaystring read-write
The domain-name of the hostnames to be allocated.
                           dhcpAutoSeedStart 1.3.6.1.4.1.559.1.2.1.33.4 ipaddress read-write
Initial seed address used for automatically allocating IP addresses. Warning: if this is changed, the lease table gets cleared automatically!
                           dhcpAutoSeedEnd 1.3.6.1.4.1.559.1.2.1.33.5 ipaddress read-write
Last seed address used for automatically allocating IP addresses.
                           dhcpAutoMask 1.3.6.1.4.1.559.1.2.1.33.6 ipaddress read-write
Subnet mask supplied to clients when automatically allocating IP addresses.
                           dhcpAutoRouter 1.3.6.1.4.1.559.1.2.1.33.7 ipaddress read-write
IP Addr of Default Router for client.
                           dhcpWINSTable 1.3.6.1.4.1.559.1.2.1.33.8 no-access
A table of WINS addresses supplied to clients.
                               dhcpWINSEntry 1.3.6.1.4.1.559.1.2.1.33.8.1 no-access
A WINS Address.
                                   dhcpWINSIndex 1.3.6.1.4.1.559.1.2.1.33.8.1.1 integer read-write
WINS Table Index.
                                   dhcpWINSAddr 1.3.6.1.4.1.559.1.2.1.33.8.1.2 ipaddress read-write
IP Addr of a WINS server for client.
                           dhcpDNSTable 1.3.6.1.4.1.559.1.2.1.33.9 no-access
A table of DNS addresses supplied to clients.
                               dhcpDNSEntry 1.3.6.1.4.1.559.1.2.1.33.9.1 no-access
A DNS Address.
                                   dhcpDNSIndex 1.3.6.1.4.1.559.1.2.1.33.9.1.1 integer read-write
DNS Table Index.
                                   dhcpDNSAddr 1.3.6.1.4.1.559.1.2.1.33.9.1.2 ipaddress read-write
IP Addr of a DNS server for client.
                           dhcpAutoLease 1.3.6.1.4.1.559.1.2.1.33.10 integer read-write
Address lease lifetime (in seconds). Lower limit is 300 (i.e. 5 min), upper limit is 43200 (i.e. 12 hours).
                           dhcpAstatTable 1.3.6.1.4.1.559.1.2.1.33.11 no-access
A table of automatically allocated IP addresses.
                                 dhcpAstatEntry 1.3.6.1.4.1.559.1.2.1.33.11.1 no-access
An automatically allocated IP address.
                                     dhcpAstatIpAddr 1.3.6.1.4.1.559.1.2.1.33.11.1.1 ipaddress read-only
Automatically allocated IP Addr.
                                     dhcpAstatIf 1.3.6.1.4.1.559.1.2.1.33.11.1.2 integer read-only
Interface over which IP address was allocated. Enumeration: 'unused': 0, 'lan': 1.
                                     dhcpAstatHwAddr 1.3.6.1.4.1.559.1.2.1.33.11.1.3 macaddress read-only
Hardware address of client to which IP address was allocated.
                                     dhcpAstatCID 1.3.6.1.4.1.559.1.2.1.33.11.1.4 octet string read-only
Identifier of client to which IP address was allocated.
                                     dhcpAstatLife 1.3.6.1.4.1.559.1.2.1.33.11.1.5 integer read-only
Remaining lifetime of lease. -1 if permanent.
                     pppAuthTable 1.3.6.1.4.1.559.1.2.1.34 no-access
The PPP Authentication Table.
                           pppAuthTableEntry 1.3.6.1.4.1.559.1.2.1.34.1 no-access
PPP authentication table entry.
                               pppAuthIndex 1.3.6.1.4.1.559.1.2.1.34.1.1 integer read-only
Index into the PPP authentication table.
                               pppAuthName 1.3.6.1.4.1.559.1.2.1.34.1.2 displaystring read-write
Name of the interface or ISDN number table entry.
                               pppAuthClass 1.3.6.1.4.1.559.1.2.1.34.1.3 integer read-write
The PPP authentication mechanism used. Enumeration: 'pap': 2, 'none': 1, 'chap': 3.
                               pppAuthLocalId 1.3.6.1.4.1.559.1.2.1.34.1.4 displaystring read-write
PPP authentication local ID.
                               pppAuthLocalPw 1.3.6.1.4.1.559.1.2.1.34.1.5 displaystring read-write
PPP authentication local passwd. Always reads blank.
                               pppAuthRemoteId 1.3.6.1.4.1.559.1.2.1.34.1.6 displaystring read-write
PPP authentication remote ID.
                               pppAuthRemotePw 1.3.6.1.4.1.559.1.2.1.34.1.7 displaystring read-write
PPP authentication remote passwd. Always reads blank.
                               pppAuthRetryPeriod 1.3.6.1.4.1.559.1.2.1.34.1.8 integer read-write
PPP authentication retry period in milliseconds.
                               pppAuthRenegPeriod 1.3.6.1.4.1.559.1.2.1.34.1.9 integer read-write
PPP authentication renogotiation period in seconds.
                               pppAuthRetryCount 1.3.6.1.4.1.559.1.2.1.34.1.10 integer read-write
PPP authentication maxiumum number of retries.
                               pppAuthMode 1.3.6.1.4.1.559.1.2.1.34.1.11 integer read-write
The Operation Required Enumeration: 'edit': 4, 'delete': 1.
                     dnsproxy 1.3.6.1.4.1.559.1.2.1.35
                           primaryDNSAddress 1.3.6.1.4.1.559.1.2.1.35.1 ipaddress read-write
The primary Domain Name System (DNS) server address to be advertised to clients. This value will be ignored if DNS Proxy is enabled, as in this case the address of this unit will be advertised instead. A value of 0.0.0.0 causes no address to be advertised.
                           secondaryDNSAddress 1.3.6.1.4.1.559.1.2.1.35.2 ipaddress read-write
The secondary Domain Name System (DNS) server address to be advertised to clients. This value will be ignored if DNS Proxy is enabled, as in this case the address of this unit will be advertised instead.
                           primaryNBNSAddress 1.3.6.1.4.1.559.1.2.1.35.3 ipaddress read-write
The primary Netbios Name Server (NBNS) address to be advertised to clients. A value of 0.0.0.0 causes no address to be advertised.
                           secondaryNBNSAddress 1.3.6.1.4.1.559.1.2.1.35.4 ipaddress read-write
The secondary Netbios Name Server (NBNS) address to be advertised to clients.
                           dnsProxyActive 1.3.6.1.4.1.559.1.2.1.35.5 integer read-write
TRUE if the DNS proxy is enabled. Enumeration: 'true': 1, 'false': 0.
                           dnsCacheSize 1.3.6.1.4.1.559.1.2.1.35.6 integer read-write
Maximum number of entries which may be held in the DNS cache if DNS Proxy is enabled.
                           dnsMaxServerTimeout 1.3.6.1.4.1.559.1.2.1.35.7 integer read-write
The maximum time in seconds for which DNS Proxy will wait for a response from a remote DNS server.
                           dnsServerRetries 1.3.6.1.4.1.559.1.2.1.35.8 integer read-write
The maximum number of times that transmission of a query to remote DNS servers will be attempted.
                           dnsDomainTable 1.3.6.1.4.1.559.1.2.1.35.9 no-access
The DNS Domain Table
                               dnsDomainTableEntry 1.3.6.1.4.1.559.1.2.1.35.9.1 no-access
Information about a DNS domain table entry.
                                   dnsDomainTableIndex 1.3.6.1.4.1.559.1.2.1.35.9.1.1 integer read-only
Index
                                   dnsDomainDomainName 1.3.6.1.4.1.559.1.2.1.35.9.1.2 displaystring read-write
The DNS Domain Name to which this table entry applies.
                                   dnsDomainProfileIndex 1.3.6.1.4.1.559.1.2.1.35.9.1.3 integer read-write
The index of the DNS Profile table entry associated with this domain table entry. 0 indicates that there is no profile associated with this entry.
                                   dnsDomainRemoteServer 1.3.6.1.4.1.559.1.2.1.35.9.1.4 displaystring read-write
The name of the route from which the addresses for remote DNS servers will be obtained. This field does not need to be set if there is a DNS Profile associated with this table entry.
                                   dnsDomainPrimaryDNS 1.3.6.1.4.1.559.1.2.1.35.9.1.5 ipaddress read-write
The primary DNS server address for this domain. If this has the value 0.0.0.0 then the address is obtained from the remote server. This field does not need to be set if there is a DNS Profile associated with this table entry.
                                   dnsDomainSecondaryDNS 1.3.6.1.4.1.559.1.2.1.35.9.1.6 ipaddress read-write
The secondary DNS server address for this domain. This field does not need to be set if there is a DNS Profile associated with this entry.
                                   dnsDomainMode 1.3.6.1.4.1.559.1.2.1.35.9.1.7 integer read-write
The operation required Enumeration: 'edit': 4, 'insert': 2, 'append': 3, 'delete': 1.
                           dnsProfileTable 1.3.6.1.4.1.559.1.2.1.35.10 no-access
A table of configuration profiles which describe the route to a remote DNS server. Each entry may be associated with one or more entries in the DNS domain table.
                                 dnsProfileEntry 1.3.6.1.4.1.559.1.2.1.35.10.1 no-access
A list of configuration profiles for remote DNS servers.
                                     dnsProfileIndex 1.3.6.1.4.1.559.1.2.1.35.10.1.1 integer read-only
Index
                                     dnsProfileName 1.3.6.1.4.1.559.1.2.1.35.10.1.2 displaystring read-write
The name of this DNS Profile.
                                     dnsProfileRemoteServer 1.3.6.1.4.1.559.1.2.1.35.10.1.3 displaystring read-write
The name of the route from which the addresses for remote DNS servers will be obtained.
                                     dnsProfilePrimaryDNS 1.3.6.1.4.1.559.1.2.1.35.10.1.4 ipaddress read-write
The primary DNS server address associated with this profile. If this has the value 0.0.0.0 then the address is obtained from the remote server.
                                     dnsProfileSecondaryDNS 1.3.6.1.4.1.559.1.2.1.35.10.1.5 ipaddress read-write
The secondary DNS server address associated with this profile.
                                     dnsProfileMode 1.3.6.1.4.1.559.1.2.1.35.10.1.6 integer read-write
The operation required Enumeration: 'edit': 4, 'add': 3, 'delete': 1.
                     memoryusage 1.3.6.1.4.1.559.1.2.1.36
                           memoryFree 1.3.6.1.4.1.559.1.2.1.36.1 integer read-only
Total number of free bytes of memory
                           memoryTotal 1.3.6.1.4.1.559.1.2.1.36.2 integer read-only
Total number of bytes of memory.
                           fragmentCount 1.3.6.1.4.1.559.1.2.1.36.3 integer read-only
Number of fragments of memory.
                           fragmentLargest 1.3.6.1.4.1.559.1.2.1.36.4 integer read-only
Size of biggest fragment in bytes.
                           pool1size 1.3.6.1.4.1.559.1.2.1.36.5 integer read-only
Size of pool 1 in bytes.
                           pool2size 1.3.6.1.4.1.559.1.2.1.36.6 integer read-only
Size of pool 2 in bytes.
                           pool3size 1.3.6.1.4.1.559.1.2.1.36.7 integer read-only
Size of pool 3 in bytes.
                           pool4size 1.3.6.1.4.1.559.1.2.1.36.8 integer read-only
Size of pool 4 in bytes.
                     traptable 1.3.6.1.4.1.559.1.2.1.37 no-access
A table of trap addresses, ports and event-masks.
                           traptableEntry 1.3.6.1.4.1.559.1.2.1.37.1 no-access
Trap Details.
                               trapIndex 1.3.6.1.4.1.559.1.2.1.37.1.1 integer read-write
Trap-Table Index.
                               trapAddr 1.3.6.1.4.1.559.1.2.1.37.1.2 ipaddress read-write
IP Addr of a trap target.
                               trapPort 1.3.6.1.4.1.559.1.2.1.37.1.3 integer read-write
UDP Port on trap target.
                               trapLogFull 1.3.6.1.4.1.559.1.2.1.37.1.4 integer read-write
Send LogFull Trap? Enumeration: 'disabled': 0, 'enabled': 1.
                               trapLogThreshold 1.3.6.1.4.1.559.1.2.1.37.1.5 integer read-write
Send LogThreshold Trap? Enumeration: 'disabled': 0, 'enabled': 1.
                               trapWarmStart 1.3.6.1.4.1.559.1.2.1.37.1.6 integer read-write
Send WarmStart Trap? Enumeration: 'disabled': 0, 'enabled': 1.
                               trapLinkDown 1.3.6.1.4.1.559.1.2.1.37.1.7 integer read-write
Send LinkDown Trap? Enumeration: 'disabled': 0, 'enabled': 1.
                               trapLinkUp 1.3.6.1.4.1.559.1.2.1.37.1.8 integer read-write
Send LinkUp Trap? Enumeration: 'disabled': 0, 'enabled': 1.
                               trapVoiceDown 1.3.6.1.4.1.559.1.2.1.37.1.9 integer read-write
Send VoiceDown Trap? Enumeration: 'disabled': 0, 'enabled': 1.
                               trapVoiceUp 1.3.6.1.4.1.559.1.2.1.37.1.10 integer read-write
Send VoiceUp Trap? Enumeration: 'disabled': 0, 'enabled': 1.
                               trapISDNDown 1.3.6.1.4.1.559.1.2.1.37.1.11 integer read-write
Send ISDNDown Trap? Enumeration: 'disabled': 0, 'enabled': 1.
                               trapISDNUp 1.3.6.1.4.1.559.1.2.1.37.1.12 integer read-write
Send ISDNUp Trap? Enumeration: 'disabled': 0, 'enabled': 1.
                               trapAlarm 1.3.6.1.4.1.559.1.2.1.37.1.13 integer read-write
Send Alarm Trap? Enumeration: 'disabled': 0, 'enabled': 1.
                               trapQ931Fail 1.3.6.1.4.1.559.1.2.1.37.1.14 integer read-write
Send Q931Fail Trap? Enumeration: 'disabled': 0, 'enabled': 1.
                               trapDASS2Fail 1.3.6.1.4.1.559.1.2.1.37.1.15 integer read-write
Send DASS2Fail Trap? Enumeration: 'disabled': 0, 'enabled': 1.
                               trapBriFail 1.3.6.1.4.1.559.1.2.1.37.1.16 integer read-write
Send BriFail Trap? Enumeration: 'disabled': 0, 'enabled': 1.
                               trapLoginAuth 1.3.6.1.4.1.559.1.2.1.37.1.17 integer read-write
Send LoginAuth Trap? Enumeration: 'disabled': 0, 'enabled': 1.
                     patTable 1.3.6.1.4.1.559.1.2.1.38 no-access
A table of Port Address Translation entries.
                           patEntry 1.3.6.1.4.1.559.1.2.1.38.1 no-access
A list of PAT entries.
                               patIndex 1.3.6.1.4.1.559.1.2.1.38.1.1 integer read-only
Index
                               patPort 1.3.6.1.4.1.559.1.2.1.38.1.2 integer read-write
The port to listen on.
                               patInternalIP 1.3.6.1.4.1.559.1.2.1.38.1.3 ipaddress read-write
The IP address to forward to.
                               patInternalPort 1.3.6.1.4.1.559.1.2.1.38.1.4 integer read-write
The port to forward to.
                               patMode 1.3.6.1.4.1.559.1.2.1.38.1.5 integer read-write
The Operation Required Enumeration: 'edit': 4, 'delete': 1.
                     tpadLanPort 1.3.6.1.4.1.559.1.2.1.39 integer read-write
The port number of the virtual LAN connection to the AT interface.
                 ports 1.3.6.1.4.1.559.1.2.2
                     portsTable 1.3.6.1.4.1.559.1.2.2.1 no-access
A table of configured physical ports.
                         portsEntry 1.3.6.1.4.1.559.1.2.2.1.1 no-access
A list of port configurations.
                             portsIndex 1.3.6.1.4.1.559.1.2.2.1.1.1 integer read-only
The physical port index, in the range 1 to number-of-ports.
                             portsName 1.3.6.1.4.1.559.1.2.2.1.1.2 displaystring read-only
The port name.
                             portsType 1.3.6.1.4.1.559.1.2.2.1.1.3 integer read-write
The configured type of the port. Enumeration: 'none': 0, 'repeater': 7, 'slipMMIauto': 10, 'hdlc': 3, 'ppp': 4, 'slip': 9, 'async': 2, 'ethernet': 5, 'voice': 8, 'tpad': 11, 'ta': 6.
                             portsPhys 1.3.6.1.4.1.559.1.2.2.1.1.4 integer read-only
The connector type. Enumeration: 'none': 0, 'v35': 1, 'v24': 3, 'aui': 5, 'tenBaseT': 7, 'tenBase2': 6, 'analogue': 8, 'x21': 2, 'isdn': 4.
                             portsTxutil 1.3.6.1.4.1.559.1.2.2.1.1.5 integer read-only
The percentage of the port transmit capacity being used multiplied by 1000.
                             portsRxutil 1.3.6.1.4.1.559.1.2.2.1.1.6 integer read-only
The percentage of the port receive capacity being used multiplied by 1000.
                             portsCompress 1.3.6.1.4.1.559.1.2.2.1.1.7 integer read-only
For ports operating with LempelZiv compression, this is the compression ratio multiplied by 10.
                             portsState 1.3.6.1.4.1.559.1.2.2.1.1.8 integer read-only
The operational state of the port. Enumeration: 'down': 2, 'notApplicable': 0, 'up': 1.
                             portsRxoctets 1.3.6.1.4.1.559.1.2.2.1.1.9 counter read-only
The number of received octets on this port.
                             portsTxoctets 1.3.6.1.4.1.559.1.2.2.1.1.10 counter read-only
The number of transmitted octets on this port.
                             portsRxpackets 1.3.6.1.4.1.559.1.2.2.1.1.11 counter read-only
The number of received packets on this port.
                             portsTxpackets 1.3.6.1.4.1.559.1.2.2.1.1.12 counter read-only
The number of transmitted packets on this port.
                             portsRxerrs 1.3.6.1.4.1.559.1.2.2.1.1.13 counter read-only
The number of receive errors on this port.
                             portsTxerrs 1.3.6.1.4.1.559.1.2.2.1.1.14 counter read-only
The number of transmit errors on this port.
                     portslanTable 1.3.6.1.4.1.559.1.2.2.2 no-access
A table of configured lan ports.
                         portslanEntry 1.3.6.1.4.1.559.1.2.2.2.1 no-access
A list of lan port configurations.
                             portslanIndex 1.3.6.1.4.1.559.1.2.2.2.1.1 integer read-only
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
                             portslanName 1.3.6.1.4.1.559.1.2.2.2.1.2 displaystring read-write
The name of the lan port.
                             portslanPriority 1.3.6.1.4.1.559.1.2.2.2.1.3 integer read-write
The spanning tree priority of this port.
                             portslanLinespeed 1.3.6.1.4.1.559.1.2.2.2.1.4 integer read-write
The linespeed of this port. Normally this should be 10000000 bits/second
                             portslanIpAddress 1.3.6.1.4.1.559.1.2.2.2.1.5 ipaddress read-write
The IP Address assigned to this port when routing is enabled.
                             portslanIpMask 1.3.6.1.4.1.559.1.2.2.2.1.6 ipaddress read-write
The IP Address Mask assigned to this port when routing is enabled.
                             portslanIpMetric 1.3.6.1.4.1.559.1.2.2.2.1.7 integer read-write
The IP routing metric assigned to this port when routing is enabled.
                             portslanIpxNetwork 1.3.6.1.4.1.559.1.2.2.2.1.8 octet string read-write
The IPX Network Address assigned to this port when routing is enabled.
                             portslanIpxType 1.3.6.1.4.1.559.1.2.2.2.1.9 integer read-write
The frame type used for IPX RIP and SAP messages emanating from this port. Enumeration: 'snap': 4, 'novell802dot3': 3, 'ieee802dot2': 2, 'ethernetII': 1.
                     portshdlcTable 1.3.6.1.4.1.559.1.2.2.3 no-access
A table of configured hdlc ports.
                         portshdlcEntry 1.3.6.1.4.1.559.1.2.2.3.1 no-access
A list of hdlc port configurations.
                             portshdlcIndex 1.3.6.1.4.1.559.1.2.2.3.1.1 integer read-only
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
                             portshdlcName 1.3.6.1.4.1.559.1.2.2.3.1.2 displaystring read-write
The name of the hdlc port.
                             portshdlcPriority 1.3.6.1.4.1.559.1.2.2.3.1.3 integer read-write
The spanning tree priority of this port.
                             portshdlcLinespeed 1.3.6.1.4.1.559.1.2.2.3.1.4 integer read-write
The linespeed of this port. This is used to calculate percentage load and Spanning tree costs.
                             portshdlcCompression 1.3.6.1.4.1.559.1.2.2.3.1.5 integer read-write
If enabled, data is compressed using the Lempel Ziv algorithm. Enumeration: 'disabled': 0, 'lzWhite': 2, 'lzStandard': 1, 'stac': 3.
                             portshdlcScramble 1.3.6.1.4.1.559.1.2.2.3.1.6 integer read-write
If enabled, data is scrambled. Enumeration: 'disabled': 0, 'enabled': 1.
                             portshdlcBackupdemand 1.3.6.1.4.1.559.1.2.2.3.1.7 integer read-write
whether to use the dialup backup and/or demand. Enumeration: 'both': 3, 'none': 0, 'backup': 1, 'demand': 2.
                             portshdlcDemandthresh 1.3.6.1.4.1.559.1.2.2.3.1.8 integer read-write
Threshold at which dialup demand is invoked, if Backup/Demand is set to demand or both in fraction of capacity * 1000.
                             portshdlcDemandperiod 1.3.6.1.4.1.559.1.2.2.3.1.9 integer read-write
Time over which demand must exceed the demand threshold before call will be established. Measured in seconds
                             portshdlcIdlethresh 1.3.6.1.4.1.559.1.2.2.3.1.10 integer read-write
Threshold at which once dialup demand is invoked, it will drop once load drops below fraction of capacity * 1000.
                             portshdlcIdleperiod 1.3.6.1.4.1.559.1.2.2.3.1.11 integer read-write
Time over which demand must be less than the idle threshold before call will be dropped. Measured in seconds.
                             portshdlcBackupalert 1.3.6.1.4.1.559.1.2.2.3.1.12 integer read-write
If enabled, the alert light will be lit whilst a backup call is made. Enumeration: 'disabled': 0, 'beep': 2, 'enabled': 1.
                             portshdlcDemandpriority 1.3.6.1.4.1.559.1.2.2.3.1.13 integer read-write
Priority of the demand call, since it may be bumped by a higher priority call.
                             portshdlcBackuppriority 1.3.6.1.4.1.559.1.2.2.3.1.14 integer read-write
Priority of the backup call, since it may be bumped by a higher priority call.
                             portshdlcBackupnumber 1.3.6.1.4.1.559.1.2.2.3.1.15 displaystring read-write
Telephone number(name of remote router) of the backup link.
                             portshdlcBackupMac 1.3.6.1.4.1.559.1.2.2.3.1.16 macaddress read-write
The MAC address of the backup bridge.
                             portshdlcIpAddress 1.3.6.1.4.1.559.1.2.2.3.1.17 ipaddress read-write
The IP Address assigned to this port when routing is enabled.
                             portshdlcIpMask 1.3.6.1.4.1.559.1.2.2.3.1.18 ipaddress read-write
The IP Address Mask assigned to this port when routing is enabled.
                             portshdlcIpMetric 1.3.6.1.4.1.559.1.2.2.3.1.19 integer read-write
The IP routing metric assigned to this port when routing is enabled.
                             portshdlcIpxNetwork 1.3.6.1.4.1.559.1.2.2.3.1.20 octet string read-write
The IPX Network Address assigned to this port when routing is enabled.
                             portshdlcIpxType 1.3.6.1.4.1.559.1.2.2.3.1.21 integer read-write
The frame type used for IPX RIP and SAP messages emanating from this port. Enumeration: 'snap': 4, 'novell802dot3': 3, 'ieee802dot2': 2, 'ethernetII': 1.
                     portspppTable 1.3.6.1.4.1.559.1.2.2.4 no-access
A table of configured ppp ports.
                         portspppEntry 1.3.6.1.4.1.559.1.2.2.4.1 no-access
A list of ppp port configurations.
                             portspppIndex 1.3.6.1.4.1.559.1.2.2.4.1.1 integer read-only
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
                             portspppName 1.3.6.1.4.1.559.1.2.2.4.1.2 displaystring read-write
The name of the ppp port.
                             portspppPriority 1.3.6.1.4.1.559.1.2.2.4.1.3 integer read-write
The spanning tree priority of this port.
                             portspppLinespeed 1.3.6.1.4.1.559.1.2.2.4.1.4 integer read-write
The linespeed of this port. This is used to calculate percentage load and Spanning tree costs.
                             portspppIpAddress 1.3.6.1.4.1.559.1.2.2.4.1.5 ipaddress read-write
The IP Address assigned to this port when routing is enabled.
                             portspppIpMask 1.3.6.1.4.1.559.1.2.2.4.1.6 ipaddress read-write
The IP Address Mask assigned to this port when routing is enabled.
                             portspppIpMetric 1.3.6.1.4.1.559.1.2.2.4.1.7 integer read-write
The IP routing metric assigned to this port when routing is enabled.
                             portspppIpxNetwork 1.3.6.1.4.1.559.1.2.2.4.1.8 octet string read-write
The IPX Network Address assigned to this port when routing is enabled.
                             portspppIpxType 1.3.6.1.4.1.559.1.2.2.4.1.9 integer read-write
The frame type used for IPX RIP and SAP messages emanating from this port. Enumeration: 'snap': 4, 'novell802dot3': 3, 'ieee802dot2': 2, 'ethernetII': 1.
                             portspppBaud 1.3.6.1.4.1.559.1.2.2.4.1.10 integer read-write
The Baud Rate. Enumeration: 'bd9600': 4, 'bd1200': 1, 'bd38400': 6, 'bd19200': 5, 'bd2400': 2, 'bd4800': 3.
                             portspppDataBits 1.3.6.1.4.1.559.1.2.2.4.1.11 integer read-write
The number of data bits. Enumeration: 'data-7-bits': 7, 'data-8-bits': 8.
                             portspppStopBits 1.3.6.1.4.1.559.1.2.2.4.1.12 integer read-write
The number of stop bits. Enumeration: 'data-1-bits': 1, 'data-2-bits': 2.
                             portspppFlowControl 1.3.6.1.4.1.559.1.2.2.4.1.13 integer read-write
Flow Control. Enumeration: 'xon': 2, 'none': 5, 'halfxon': 3, 'rts': 1, 'rts-on-tx': 4.
                             portspppTxParity 1.3.6.1.4.1.559.1.2.2.4.1.14 integer read-write
Transmit Parity. Enumeration: 'even': 3, 'none': 1, 'space': 5, 'odd': 2, 'mark': 4.
                             portspppRxParity 1.3.6.1.4.1.559.1.2.2.4.1.15 integer read-write
Receive Parity. Enumeration: 'even': 3, 'none': 1, 'space': 5, 'odd': 2, 'mark': 4.
                             portspppRemoteUnit 1.3.6.1.4.1.559.1.2.2.4.1.16 integer read-write
Remote Unit Type. Enumeration: 'r3com': 2, 'ascend': 4, 'cisco': 3, 'any': 1, 'spider': 5.
                             portspppIPRemoteAddress 1.3.6.1.4.1.559.1.2.2.4.1.17 ipaddress read-write
Remote IP Address.
                     portstaTable 1.3.6.1.4.1.559.1.2.2.5 no-access
A table of configured ta ports.
                         portstaEntry 1.3.6.1.4.1.559.1.2.2.5.1 no-access
A list of ta port configurations.
                             portstaIndex 1.3.6.1.4.1.559.1.2.2.5.1.1 integer read-only
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
                             portstaName 1.3.6.1.4.1.559.1.2.2.5.1.2 displaystring read-write
The name of the ta port.
                             portstaPriority 1.3.6.1.4.1.559.1.2.2.5.1.3 integer read-write
The spanning tree priority of this port.
                             portstaLinespeed 1.3.6.1.4.1.559.1.2.2.5.1.4 integer read-write
The linespeed of this port. This is used to calculate percentage load and Spanning tree costs.
                             portstaCompression 1.3.6.1.4.1.559.1.2.2.5.1.5 integer read-write
If enabled, data is compressed using the Lempel Ziv algorithm. Enumeration: 'disabled': 0, 'lzWhite': 2, 'lzStandard': 1, 'stac': 3.
                             portstaScramble 1.3.6.1.4.1.559.1.2.2.5.1.6 integer read-write
If enabled, data is scrambled. Enumeration: 'disabled': 0, 'enabled': 1.
                             portstaDemand 1.3.6.1.4.1.559.1.2.2.5.1.7 integer read-write
whether to use enable demand top-up. Enumeration: 'disabled': 0, 'enabled': 2.
                             portstaDemandthresh 1.3.6.1.4.1.559.1.2.2.5.1.8 integer read-write
Threshold at which dialup demand is invoked, if Backup/Demand is set to demand or both in fraction of capacity * 1000.
                             portstaDemandperiod 1.3.6.1.4.1.559.1.2.2.5.1.9 integer read-write
Time over which demand must exceed the demand threshold before call will be established. Measured in seconds
                             portstaIdlethresh 1.3.6.1.4.1.559.1.2.2.5.1.10 integer read-write
Threshold at which once dialup demand is invoked, it will drop once load drops below fraction of capacity * 1000.
                             portstaIdleperiod 1.3.6.1.4.1.559.1.2.2.5.1.11 integer read-write
Time over which demand must be less than the idle threshold before call will be dropped. Measured in seconds.
                             portstaDemandpriority 1.3.6.1.4.1.559.1.2.2.5.1.13 integer read-write
Priority of the demand call, since it may be bumped by a higher priority call.
                             portstaDialtimeout 1.3.6.1.4.1.559.1.2.2.5.1.17 integer read-write
The time in seconds for which bridge will wait for an OK response from the external TA.
                             portstaAtzstring 1.3.6.1.4.1.559.1.2.2.5.1.18 displaystring read-write
Initialization string for the TA.
                             portstaSpidstring 1.3.6.1.4.1.559.1.2.2.5.1.19 displaystring read-write
SPID string for the TA.
                     portsslipTable 1.3.6.1.4.1.559.1.2.2.6 no-access
A table of configured slip ports.
                         portsslipEntry 1.3.6.1.4.1.559.1.2.2.6.1 no-access
A list of slip port configurations.
                             portsslipIndex 1.3.6.1.4.1.559.1.2.2.6.1.1 integer read-only
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
                             portsslipName 1.3.6.1.4.1.559.1.2.2.6.1.2 displaystring read-write
The name of the slip port.
                             portsslipPriority 1.3.6.1.4.1.559.1.2.2.6.1.3 integer read-write
The spanning tree priority of this port.
                             portsslipLinespeed 1.3.6.1.4.1.559.1.2.2.6.1.4 integer read-write
The linespeed of this port. This is used to calculate percentage load and Spanning tree costs.
                             portsslipIpAddress 1.3.6.1.4.1.559.1.2.2.6.1.5 ipaddress read-write
The IP Address assigned to this port when routing is enabled.
                             portsslipIpMask 1.3.6.1.4.1.559.1.2.2.6.1.6 ipaddress read-write
The IP Address Mask assigned to this port when routing is enabled.
                             portsslipIpMetric 1.3.6.1.4.1.559.1.2.2.6.1.7 integer read-write
The IP routing metric assigned to this port when routing is enabled.
                             portsslipBaud 1.3.6.1.4.1.559.1.2.2.6.1.8 integer read-write
The Baud Rate. Enumeration: 'bd9600': 4, 'bd1200': 1, 'bd38400': 6, 'bd19200': 5, 'bd2400': 2, 'bd4800': 3.
                             portsslipDataBits 1.3.6.1.4.1.559.1.2.2.6.1.9 integer read-only
The number of data bits. Enumeration: 'data-7-bits': 7, 'data-8-bits': 8.
                             portsslipStopBits 1.3.6.1.4.1.559.1.2.2.6.1.10 integer read-write
The number of stop bits. Enumeration: 'data-1-bits': 1, 'data-2-bits': 2.
                             portsslipFlowControl 1.3.6.1.4.1.559.1.2.2.6.1.11 integer read-write
Flow Control. Enumeration: 'none': 5, 'rts': 1, 'rts-on-tx': 4.
                             portsslipTxParity 1.3.6.1.4.1.559.1.2.2.6.1.12 integer read-only
Transmit Parity. Enumeration: 'even': 3, 'none': 1, 'space': 5, 'odd': 2, 'mark': 4.
                             portsslipRxParity 1.3.6.1.4.1.559.1.2.2.6.1.13 integer read-only
Receive Parity. Enumeration: 'even': 3, 'none': 1, 'space': 5, 'odd': 2, 'mark': 4.
                             portsslipMTU 1.3.6.1.4.1.559.1.2.2.6.1.14 integer read-write
Maximum Transmit Unit Length
                             portsslipRIPPrivate 1.3.6.1.4.1.559.1.2.2.6.1.15 integer read-write
Advertise IP Route Enumeration: 'yes': 0, 'no': 1.
                             portsslipIPRemoteAddress 1.3.6.1.4.1.559.1.2.2.6.1.16 ipaddress read-write
Remote IP Address.
                     portsasyncTable 1.3.6.1.4.1.559.1.2.2.7 no-access
A table of configured asynchronous serial manager ports.
                         portsasyncEntry 1.3.6.1.4.1.559.1.2.2.7.1 no-access
A list of asynchronous serial manager port configurations.
                             portsasyncIndex 1.3.6.1.4.1.559.1.2.2.7.1.1 integer read-only
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
                             portsasyncName 1.3.6.1.4.1.559.1.2.2.7.1.2 displaystring read-write
The name of the asynchronous serial manager port.
                             portsasyncBaud 1.3.6.1.4.1.559.1.2.2.7.1.3 integer read-write
The Baud Rate. Enumeration: 'bd9600': 4, 'bd1200': 1, 'bd38400': 6, 'bd19200': 5, 'bd2400': 2, 'bd4800': 3.
                             portsasyncDataBits 1.3.6.1.4.1.559.1.2.2.7.1.4 integer read-write
The number of data bits. Enumeration: 'data-7-bits': 7, 'data-8-bits': 8.
                             portsasyncStopBits 1.3.6.1.4.1.559.1.2.2.7.1.5 integer read-write
The number of stop bits. Enumeration: 'data-1-bits': 1, 'data-2-bits': 2.
                             portsasyncFlowControl 1.3.6.1.4.1.559.1.2.2.7.1.6 integer read-write
Flow Control. Enumeration: 'both': 6, 'none': 5, 'rtscts': 1, 'xonxoff': 2.
                             portsasyncTxParity 1.3.6.1.4.1.559.1.2.2.7.1.7 integer read-write
Transmit Parity. Enumeration: 'even': 3, 'none': 1, 'space': 5, 'odd': 2, 'mark': 4.
                             portsasyncRxParity 1.3.6.1.4.1.559.1.2.2.7.1.8 integer read-write
Receive Parity. Enumeration: 'even': 3, 'none': 1, 'space': 5, 'odd': 2, 'mark': 4.
                     portsvoiceTable 1.3.6.1.4.1.559.1.2.2.8 no-access
A table of configured voice ports.
                         portsvoiceEntry 1.3.6.1.4.1.559.1.2.2.8.1 no-access
A list of voice port configurations.
                             portsvoiceIndex 1.3.6.1.4.1.559.1.2.2.8.1.1 integer read-only
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
                             portsvoiceName 1.3.6.1.4.1.559.1.2.2.8.1.2 displaystring read-write
The name of the voice port.
                             portsvoiceCallsPermitted 1.3.6.1.4.1.559.1.2.2.8.1.3 integer read-write
Controls whether incoming, outgoing or both types of voice call are permitted. Enumeration: 'out': 2, 'inout': 0, 'in': 1.
                             portsvoiceEncoding 1.3.6.1.4.1.559.1.2.2.8.1.4 integer read-write
The sound encoding mecanism used. Enumeration: 'ulaw': 1, 'alaw': 0.
                             portsvoiceDialMode 1.3.6.1.4.1.559.1.2.2.8.1.5 integer read-write
Controls whether each digit dialed is sent to the network immediately, or the whole number sent complete. Enumeration: 'enbloc': 1, 'overlap': 0.
                     portstpadTable 1.3.6.1.4.1.559.1.2.2.9 no-access
A table of configured tpad ports.
                         portstpadEntry 1.3.6.1.4.1.559.1.2.2.9.1 no-access
A list of tpad port configurations.
                             portstpadIndex 1.3.6.1.4.1.559.1.2.2.9.1.1 integer read-only
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
                             portstpadName 1.3.6.1.4.1.559.1.2.2.9.1.2 displaystring read-write
The name of the tpad port.
                             portstpadBaud 1.3.6.1.4.1.559.1.2.2.9.1.3 integer read-write
The Baud Rate. Enumeration: 'bd9600': 4, 'bd1200': 1, 'bd38400': 6, 'bd19200': 5, 'bd2400': 2, 'bd4800': 3, 'bd57600': 7.
                             portstpadDataBits 1.3.6.1.4.1.559.1.2.2.9.1.4 integer read-write
The number of data bits. Enumeration: 'data-7-bits': 7, 'data-8-bits': 8.
                             portstpadStopBits 1.3.6.1.4.1.559.1.2.2.9.1.5 integer read-write
The number of stop bits. Enumeration: 'data-1-bits': 1, 'data-2-bits': 2.
                             portstpadParity 1.3.6.1.4.1.559.1.2.2.9.1.6 integer read-write
Parity. Enumeration: 'even': 3, 'none': 1, 'space': 5, 'odd': 2, 'mark': 4.
                             portstpadTxFlowControl 1.3.6.1.4.1.559.1.2.2.9.1.7 integer read-write
Transmit Flow Control. Enumeration: 'both': 6, 'none': 5, 'rtscts': 1, 'xonxoff': 2.
                             portstpadRxFlowControl 1.3.6.1.4.1.559.1.2.2.9.1.8 integer read-write
Receive Flow Control. Enumeration: 'both': 6, 'none': 5, 'rtscts': 1, 'xonxoff': 2.
                             portstpadX25MinLCN 1.3.6.1.4.1.559.1.2.2.9.1.9 integer read-write
X25 Minimum LCN
                             portstpadX25MaxLCN 1.3.6.1.4.1.559.1.2.2.9.1.10 integer read-write
X25 Maximum LCN
                 bridge 1.3.6.1.4.1.559.1.2.3
                     mlink 1.3.6.1.4.1.559.1.2.3.1
                         mlinkTable 1.3.6.1.4.1.559.1.2.3.1.1 no-access
A table of Multi-link links.
                             mlinkEntry 1.3.6.1.4.1.559.1.2.3.1.1.1 no-access
A MLINK ports.
                                 mlinkIndex 1.3.6.1.4.1.559.1.2.3.1.1.1.1 integer read-only
The index of this mlink link 1 to N.
                                 mlinkName 1.3.6.1.4.1.559.1.2.3.1.1.1.2 displaystring read-only
The name of the Bridge connected to by this link
                                 mlinkNumberOfPorts 1.3.6.1.4.1.559.1.2.3.1.1.1.3 integer read-only
Number of actual ports that make this mlink
                                 mlinkInFrames 1.3.6.1.4.1.559.1.2.3.1.1.1.4 counter read-only
The number of frames that have been received by this port from its segment. Note that a frame received on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function.
                                 mlinkOutFrames 1.3.6.1.4.1.559.1.2.3.1.1.1.5 counter read-only
The number of frames that have been transmitted by this port to its segment. Note that a frame transmitted on the interface corresponding to this port is only counted by this object if and only if it is for a protocol being processed by the local bridging function.
                                 mlinkInDiscards 1.3.6.1.4.1.559.1.2.3.1.1.1.6 counter read-only
Count of valid frames received which were discarded (i.e., filtered) by the Forwarding Process.
                                 mlinkState 1.3.6.1.4.1.559.1.2.3.1.1.1.7 integer read-only
The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1). Enumeration: 'listening': 3, 'disabled': 1, 'broken': 6, 'learning': 4, 'forwarding': 5, 'blocking': 2.
                     filter 1.3.6.1.4.1.559.1.2.3.2
                         filterTable 1.3.6.1.4.1.559.1.2.3.2.1 no-access
A table of filter address pairs.
                             filterEntry 1.3.6.1.4.1.559.1.2.3.2.1.1 no-access
A list of information for each filter pair.
                                 filterDest 1.3.6.1.4.1.559.1.2.3.2.1.1.1 octet string read-write
The destination Mac Address for the filter pair.
                                 filterSource 1.3.6.1.4.1.559.1.2.3.2.1.1.2 octet string read-write
The source Mac Address for the filter pair.
                                 filterPrimary 1.3.6.1.4.1.559.1.2.3.2.1.1.3 integer read-only
This is the primary entry of the filter pair. Enumeration: 'true': 1, 'false': 0.
                                 filterType 1.3.6.1.4.1.559.1.2.3.2.1.1.4 integer read-write
This is a permanent not a learned entry. Set this to delete to delete the entry and its partner. Enumeration: 'learned': 2, 'permanent': 1, 'invalid': 3.
                                 filterRoute 1.3.6.1.4.1.559.1.2.3.2.1.1.5 displaystring read-write
The link down which the destination is to be found.
                                 filterPacketcount 1.3.6.1.4.1.559.1.2.3.2.1.1.6 integer read-write
The number of packets received by this destination from this source; may be reset to 0.
                                 filterBytecount 1.3.6.1.4.1.559.1.2.3.2.1.1.7 integer read-write
The number of bytes received by this destination from this source; may be reset to 0.
                         filtertypeTable 1.3.6.1.4.1.559.1.2.3.2.2 no-access
A table filter types.
                             filtertypeEntry 1.3.6.1.4.1.559.1.2.3.2.2.1 no-access
A list of types to filter on.
                                 filtertypeIndex 1.3.6.1.4.1.559.1.2.3.2.2.1.1 integer read-write
The index of the type filter entry.
                                 filtertypeClass 1.3.6.1.4.1.559.1.2.3.2.2.1.2 integer read-write
The entry class, or set to delete to remove. Enumeration: 'ethernet': 1, 'ieee': 0.
                                 filtertypeLsap 1.3.6.1.4.1.559.1.2.3.2.2.1.3 integer read-write
For ieee, this is in the range 0..255, For ethernet, in the range 0..65535.
                                 filtertypeMode 1.3.6.1.4.1.559.1.2.3.2.2.1.4 integer read-write
The Operation Required Enumeration: 'edit': 0, 'delete': 1.
                         filterAgingtime 1.3.6.1.4.1.559.1.2.3.2.3 integer read-write
For learned entries, this gives the time in seconds after which the learned entries are discarded.
                         filterLearning 1.3.6.1.4.1.559.1.2.3.2.4 integer read-write
If disabled, this stops the bridge from learning new entries. Enumeration: 'disabled': 0, 'enabled': 1.
                         filterActiononmatch 1.3.6.1.4.1.559.1.2.3.2.5 integer read-write
If packet matches an entry in the filter table, reject or forward the packet. Enumeration: 'forward': 1, 'reject': 0.
                         filterFiltermcast 1.3.6.1.4.1.559.1.2.3.2.6 integer read-write
If disabled, pass through multicast addresses unfiltered. Enumeration: 'disabled': 0, 'enabled': 1.
                         filterTypematching 1.3.6.1.4.1.559.1.2.3.2.7 integer read-write
If enabled, then check whether the Type/Lsap of the packet is in the type table before forwarding. Enumeration: 'disabled': 0, 'enabled': 1.
                         filterTypematchaction 1.3.6.1.4.1.559.1.2.3.2.8 integer read-write
If type matching enabled, then reject or forward packets whose Lsap/Type are in the table. Enumeration: 'forward': 1, 'reject': 0.
                         filterLearnsourceonmcast 1.3.6.1.4.1.559.1.2.3.2.9 integer read-write
If enabled, then learn source location from multicast packets. Enumeration: 'disabled': 0, 'enabled': 1.
                         filterFlushall 1.3.6.1.4.1.559.1.2.3.2.10 integer read-write
If true, then the bridge will retire all learned entries. Enumeration: 'true': 1, 'false': 0.
                         filterLearnnovell 1.3.6.1.4.1.559.1.2.3.2.11 integer read-write
If true, then the bridge will learn Novell server addresses and enter them into the autocall table. Enumeration: 'true': 1, 'false': 0.
                         filterLearnbridging 1.3.6.1.4.1.559.1.2.3.2.12 integer read-write
Enables or disables bridging. Enumeration: 'true': 1, 'false': 0.
                     authorised 1.3.6.1.4.1.559.1.2.3.3
                         authorisedTable 1.3.6.1.4.1.559.1.2.3.3.1 no-access
A table of bridges allowed to join the network.
                             authorisedEntry 1.3.6.1.4.1.559.1.2.3.3.1.1 no-access
A list of authorised bridges.
                                 authorisedIndex 1.3.6.1.4.1.559.1.2.3.3.1.1.1 octet string read-write
The MAC address of an authorised bridge.
                                 authorisedAddress 1.3.6.1.4.1.559.1.2.3.3.1.1.2 octet string read-write
The Mac Address of the bridge authorised to use the network.
                                 authorisedMode 1.3.6.1.4.1.559.1.2.3.3.1.1.3 integer read-write
The Operation Required Enumeration: 'edit': 0, 'delete': 1.
                     isdn 1.3.6.1.4.1.559.1.2.3.4
                         autocall 1.3.6.1.4.1.559.1.2.3.4.1
                             autocallMacTable 1.3.6.1.4.1.559.1.2.3.4.1.2 no-access
A table of telephone numbers which are automatically dialled upon receipt of MAC addresses.
                                 autocallMacEntry 1.3.6.1.4.1.559.1.2.3.4.1.2.1 no-access
A list of calls.
                                     autocallMacIndex 1.3.6.1.4.1.559.1.2.3.4.1.2.1.1 octet string read-only
Index
                                     autocallMacDefault 1.3.6.1.4.1.559.1.2.3.4.1.2.1.2 integer read-write
Default MAC Autocall Enumeration: 'enable': 1, 'disable': 2.
                                     autocallMacBumpable 1.3.6.1.4.1.559.1.2.3.4.1.2.1.3 integer read-write
Make autocall bumpable Enumeration: 'enable': 1, 'disable': 2.
                                     autocallMacIdle 1.3.6.1.4.1.559.1.2.3.4.1.2.1.4 integer read-write
Number of seconds this call can be idle before call is dropped.
                                     autocallMacIdleThreshold 1.3.6.1.4.1.559.1.2.3.4.1.2.1.5 integer read-write
Idle is defined by the line being less than a certain activity. Full load is 1000.
                                     autocallMacAddress 1.3.6.1.4.1.559.1.2.3.4.1.2.1.6 macaddress read-write
The MAC address.
                                     autocallMacIsdn 1.3.6.1.4.1.559.1.2.3.4.1.2.1.7 displaystring read-write
The ISDN telephone number to call.
                                     autocallMacMode 1.3.6.1.4.1.559.1.2.3.4.1.2.1.8 integer read-write
The Operation Required Enumeration: 'edit': 4, 'delete': 1.
                             autocallIpTable 1.3.6.1.4.1.559.1.2.3.4.1.3 no-access
A table of telephone numbers which are automatically dialled upon receipt of IP addresses.
                                 autocallIpEntry 1.3.6.1.4.1.559.1.2.3.4.1.3.1 no-access
A list of calls.
                                     autocallIpIndex 1.3.6.1.4.1.559.1.2.3.4.1.3.1.1 octet string read-only
Index
                                     autocallIpBumpable 1.3.6.1.4.1.559.1.2.3.4.1.3.1.2 integer read-write
Make autocall bumpable Enumeration: 'enable': 1, 'disable': 2.
                                     autocallIpIdle 1.3.6.1.4.1.559.1.2.3.4.1.3.1.3 integer read-write
Number of seconds this call can be idle before call is dropped.
                                     autocallIpIdleThreshold 1.3.6.1.4.1.559.1.2.3.4.1.3.1.4 integer read-write
Idle is defined by the line being less than a certain activity. Full load is 1000.
                                     autocallIpAddress 1.3.6.1.4.1.559.1.2.3.4.1.3.1.5 ipaddress read-write
The IP address.
                                     autocallIpMask 1.3.6.1.4.1.559.1.2.3.4.1.3.1.6 ipaddress read-write
The IP mask.
                                     autocallIpInverse 1.3.6.1.4.1.559.1.2.3.4.1.3.1.7 integer read-write
Make inverse autocall Enumeration: 'enable': 1, 'disable': 2.
                                     autocallIpIsdn 1.3.6.1.4.1.559.1.2.3.4.1.3.1.8 displaystring read-write
The ISDN telephone number to call.
                                     autocallIpMode 1.3.6.1.4.1.559.1.2.3.4.1.3.1.9 integer read-write
The Operation Required Enumeration: 'edit': 4, 'delete': 1.
                             autocallIpxSapTable 1.3.6.1.4.1.559.1.2.3.4.1.4 no-access
A table of telephone numbers which are automatically dialled upon receipt of IPX SAP addresses.
                                 autocallIpxSapEntry 1.3.6.1.4.1.559.1.2.3.4.1.4.1 no-access
A list of calls.
                                     autocallIpxSapIndex 1.3.6.1.4.1.559.1.2.3.4.1.4.1.1 octet string read-only
Index
                                     autocallIpxSapServer 1.3.6.1.4.1.559.1.2.3.4.1.4.1.2 displaystring read-write
The SAP server name.
                                     autocallIpxSapNetwork 1.3.6.1.4.1.559.1.2.3.4.1.4.1.3 octet string read-write
The SAP network number.
                                     autocallIpxSapNode 1.3.6.1.4.1.559.1.2.3.4.1.4.1.4 macaddress read-write
The SAP node number.
                                     autocallIpxSapSocket 1.3.6.1.4.1.559.1.2.3.4.1.4.1.5 octet string read-write
The SAP socket number.
                                     autocallIpxSapService 1.3.6.1.4.1.559.1.2.3.4.1.4.1.6 octet string read-write
The SAP service type.
                                     autocallIpxSapHops 1.3.6.1.4.1.559.1.2.3.4.1.4.1.7 integer read-write
Number of hops.
                                     autocallIpxSapIsdn 1.3.6.1.4.1.559.1.2.3.4.1.4.1.8 displaystring read-write
The ISDN telephone number to call.
                                     autocallIpxSapFrameType 1.3.6.1.4.1.559.1.2.3.4.1.4.1.9 integer read-write
The frame type. Enumeration: 'snap': 4, 'ieee8022': 2, 'etherII': 1, 'ieee8023': 3.
                                     autocallIpxSapDirectNetwork 1.3.6.1.4.1.559.1.2.3.4.1.4.1.10 octet string read-write
The Direct network number.
                                     autocallIpxSapRouterMac 1.3.6.1.4.1.559.1.2.3.4.1.4.1.11 macaddress read-write
The Router Mac.
                                     autocallIpxSapNearest 1.3.6.1.4.1.559.1.2.3.4.1.4.1.12 integer read-write
In bridging mode, generate nearest server response for this server. Enumeration: 'enable': 1, 'disable': 2.
                                     autocallIpxSapPpp 1.3.6.1.4.1.559.1.2.3.4.1.4.1.13 integer read-write
PPP Mode. Enumeration: 'enable': 1, 'disable': 2.
                                     autocallIpxSapIsdnType 1.3.6.1.4.1.559.1.2.3.4.1.4.1.14 integer read-write
The ISDN type. Enumeration: 'lapb': 2, 'sync': 1.
                                     autocallIpxSapMode 1.3.6.1.4.1.559.1.2.3.4.1.4.1.15 integer read-write
The Operation Required Enumeration: 'edit': 4, 'delete': 1.
                             autocallIpxTable 1.3.6.1.4.1.559.1.2.3.4.1.5 no-access
A table of telephone numbers which are automatically dialled upon receipt of IPX addresses.
                                 autocallIpxEntry 1.3.6.1.4.1.559.1.2.3.4.1.5.1 no-access
A list of calls.
                                     autocallIpxIndex 1.3.6.1.4.1.559.1.2.3.4.1.5.1.1 octet string read-only
Index
                                     autocallIpxNetwork 1.3.6.1.4.1.559.1.2.3.4.1.5.1.2 octet string read-write
The network number.
                                     autocallIpxNode 1.3.6.1.4.1.559.1.2.3.4.1.5.1.3 macaddress read-write
The node number.
                                     autocallIpxPacketType 1.3.6.1.4.1.559.1.2.3.4.1.5.1.4 octet string read-write
Packet Type.
                                     autocallIpxTransportControl 1.3.6.1.4.1.559.1.2.3.4.1.5.1.5 integer read-write
Transport Control.
                                     autocallIpxIsdn 1.3.6.1.4.1.559.1.2.3.4.1.5.1.6 displaystring read-write
The ISDN telephone number to call.
                                     autocallIpxBumpable 1.3.6.1.4.1.559.1.2.3.4.1.5.1.7 integer read-write
Make autocall bumpable Enumeration: 'enable': 1, 'disable': 2.
                                     autocallIpxIdle 1.3.6.1.4.1.559.1.2.3.4.1.5.1.8 integer read-write
Number of seconds this call can be idle before call is dropped.
                                     autocallIpxIdleThreshold 1.3.6.1.4.1.559.1.2.3.4.1.5.1.9 integer read-write
Idle is defined by the line being less than a certain activity. Full load is 1000.
                                     autocallIpxDefault 1.3.6.1.4.1.559.1.2.3.4.1.5.1.10 integer read-write
Default IPX Autocall Enumeration: 'enable': 1, 'disable': 2.
                                     autocallIpxFrameType 1.3.6.1.4.1.559.1.2.3.4.1.5.1.11 integer read-write
The frame type. Enumeration: 'snap': 4, 'ieee8022': 2, 'etherII': 1, 'ieee8023': 3.
                                     autocallIpxPpp 1.3.6.1.4.1.559.1.2.3.4.1.5.1.12 integer read-write
PPP Mode. Enumeration: 'enable': 1, 'disable': 2.
                                     autocallIpxIsdnType 1.3.6.1.4.1.559.1.2.3.4.1.5.1.13 integer read-write
The ISDN type. Enumeration: 'lapb': 2, 'sync': 1.
                                     autocallIpxMode 1.3.6.1.4.1.559.1.2.3.4.1.5.1.14 integer read-write
The Operation Required Enumeration: 'edit': 4, 'delete': 1.
                             autocallIpxRipTable 1.3.6.1.4.1.559.1.2.3.4.1.6 no-access
A table of telephone numbers which are automatically dialled upon receipt of IPX RIP addresses.
                                 autocallIpxRipEntry 1.3.6.1.4.1.559.1.2.3.4.1.6.1 no-access
A list of calls.
                                     autocallIpxRipIndex 1.3.6.1.4.1.559.1.2.3.4.1.6.1.1 octet string read-only
Index
                                     autocallIpxRipNetwork 1.3.6.1.4.1.559.1.2.3.4.1.6.1.2 octet string read-write
The network number.
                                     autocallIpxRipHops 1.3.6.1.4.1.559.1.2.3.4.1.6.1.3 integer read-write
Number of Hops.
                                     autocallIpxRipTicks 1.3.6.1.4.1.559.1.2.3.4.1.6.1.4 integer read-write
Number of Ticks.
                                     autocallIpxRipNode 1.3.6.1.4.1.559.1.2.3.4.1.6.1.5 macaddress read-write
The node number.
                                     autocallIpxRipIsdn 1.3.6.1.4.1.559.1.2.3.4.1.6.1.6 displaystring read-write
The ISDN telephone number to call.
                                     autocallIpxRipFrameType 1.3.6.1.4.1.559.1.2.3.4.1.6.1.7 integer read-write
The frame type. Enumeration: 'snap': 4, 'ieee8022': 2, 'etherII': 1, 'ieee8023': 3.
                                     autocallIpxRipDirectNetwork 1.3.6.1.4.1.559.1.2.3.4.1.6.1.8 octet string read-write
The Direct network number.
                                     autocallIpxRipRouterMac 1.3.6.1.4.1.559.1.2.3.4.1.6.1.9 macaddress read-write
The Router Mac.
                                     autocallIpxRipLinkTicks 1.3.6.1.4.1.559.1.2.3.4.1.6.1.10 integer read-write
Number of Link Ticks.
                                     autocallIpxRipPpp 1.3.6.1.4.1.559.1.2.3.4.1.6.1.11 integer read-write
PPP Mode. Enumeration: 'enable': 1, 'disable': 2.
                                     autocallIpxRipIsdnType 1.3.6.1.4.1.559.1.2.3.4.1.6.1.12 integer read-write
The ISDN type. Enumeration: 'lapb': 2, 'sync': 1.
                                     autocallIpxRipMode 1.3.6.1.4.1.559.1.2.3.4.1.6.1.13 integer read-write
The Operation Required Enumeration: 'edit': 4, 'delete': 1.
                             autocallDialTable 1.3.6.1.4.1.559.1.2.3.4.1.7 no-access
A table of telephone numbers which are automatically dialled upon receipt of an ISDN call with a matching CLI response.
                                 autocallDialEntry 1.3.6.1.4.1.559.1.2.3.4.1.7.1 no-access
A list of calls.
                                     autocallDialIndex 1.3.6.1.4.1.559.1.2.3.4.1.7.1.1 octet string read-only
Index
                                     autocallDialCli 1.3.6.1.4.1.559.1.2.3.4.1.7.1.2 displaystring read-write
The ISDN telephone number to match.
                                     autocallDialIsdn 1.3.6.1.4.1.559.1.2.3.4.1.7.1.3 displaystring read-write
The ISDN telephone number to call.
                                     autocallDialBumpable 1.3.6.1.4.1.559.1.2.3.4.1.7.1.4 integer read-write
Make autocall bumpable Enumeration: 'enable': 1, 'disable': 2.
                                     autocallDialIdle 1.3.6.1.4.1.559.1.2.3.4.1.7.1.5 integer read-write
Number of seconds this call can be idle before call is dropped.
                                     autocallDialIdleThreshold 1.3.6.1.4.1.559.1.2.3.4.1.7.1.6 integer read-write
Idle is defined by the line being less than a certain activity. Full load is 1000.
                                     autocallDialMode 1.3.6.1.4.1.559.1.2.3.4.1.7.1.7 integer read-write
The Operation Required Enumeration: 'edit': 4, 'delete': 1.
                         isdnbands 1.3.6.1.4.1.559.1.2.3.4.2
                             isdnbandsTable 1.3.6.1.4.1.559.1.2.3.4.2.1 no-access
A table of isdn timebands and their properties.
                                 isdnbandsEntry 1.3.6.1.4.1.559.1.2.3.4.2.1.1 no-access
A list of isdn timebands.
                                     isdnbandsIndex 1.3.6.1.4.1.559.1.2.3.4.2.1.1.1 integer read-write
The index of this ISDN band.
                                     isdnbandsName 1.3.6.1.4.1.559.1.2.3.4.2.1.1.2 displaystring read-write
The name of this ISDN band.
                                     isdnbandsStarttime 1.3.6.1.4.1.559.1.2.3.4.2.1.1.3 integer read-write
The start time in seconds since midnight.
                                     isdnbandsEndtime 1.3.6.1.4.1.559.1.2.3.4.2.1.1.4 integer read-write
The end time in seconds since midnight.
                                     isdnbandsDays 1.3.6.1.4.1.559.1.2.3.4.2.1.1.5 displaystring read-write
Days of the week assigned to this timeband, separated by colons. Use abbreviations : monday - Mo tuesday - Tu wednesday - We thursday - Th friday - Fr saturday - Sa sunday - Su eg saturday and sunday is Sa:Su .
                                     isdnbandsAllowbackup 1.3.6.1.4.1.559.1.2.3.4.2.1.1.6 integer read-write
Allow isdn calls to be made to back up bridge links during this time. Enumeration: 'true': 1, 'false': 0.
                                     isdnbandsAllowdemand 1.3.6.1.4.1.559.1.2.3.4.2.1.1.7 integer read-write
Allow isdn calls to be made for demand bandwidth during this time. Enumeration: 'true': 1, 'false': 0.
                                     isdnbandsAllowautocall 1.3.6.1.4.1.559.1.2.3.4.2.1.1.8 integer read-write
Allow isdn calls to be made for autocalls during this time. Enumeration: 'true': 1, 'false': 0.
                                     isdnbandsAllowlist 1.3.6.1.4.1.559.1.2.3.4.2.1.1.9 integer read-write
Allow isdn calls to be made to ISDN numbers on the list for this timeband during this time. Enumeration: 'true': 1, 'false': 0.
                                     isdnbandsMode 1.3.6.1.4.1.559.1.2.3.4.2.1.1.12 integer read-write
The Operation Required Enumeration: 'edit': 0, 'delete': 1.
                             isdnbandsBridgeListTable 1.3.6.1.4.1.559.1.2.3.4.2.2 no-access
A table of isdn timebands and their properties.
                                 isdnbandsBridgeListEntry 1.3.6.1.4.1.559.1.2.3.4.2.2.1 no-access
A list of isdn timebands.
                                     isdnbandsBridgeListIndex 1.3.6.1.4.1.559.1.2.3.4.2.2.1.1 integer read-write
The index of this ISDN band.
                                     isdnbandsBridgeListBandName 1.3.6.1.4.1.559.1.2.3.4.2.2.1.2 displaystring read-write
The name of this ISDN band.
                                     isdnbandsBridgeListBridgeName 1.3.6.1.4.1.559.1.2.3.4.2.2.1.3 displaystring read-write
The name of this ISDN band.
                         isdnnumbers 1.3.6.1.4.1.559.1.2.3.4.3
                             isdnnumbersTable 1.3.6.1.4.1.559.1.2.3.4.3.1 no-access
A table of isdn numbers against names.
                                 isdnnumbersEntry 1.3.6.1.4.1.559.1.2.3.4.3.1.1 no-access
A list of isdn numbers.
                                     isdnnumbersIndex 1.3.6.1.4.1.559.1.2.3.4.3.1.1.1 octet string read-write
The index of this ISDN number.
                                     isdnnumbersName 1.3.6.1.4.1.559.1.2.3.4.3.1.1.2 displaystring read-write
The name of this ISDN number.
                                     isdnnumbersNumber1 1.3.6.1.4.1.559.1.2.3.4.3.1.1.3 displaystring read-write
The ISDN number (1).
                                     isdnnumbersNumber2 1.3.6.1.4.1.559.1.2.3.4.3.1.1.4 displaystring read-write
The ISDN number (2).
                                     isdnnumbersNumber3 1.3.6.1.4.1.559.1.2.3.4.3.1.1.5 displaystring read-write
The ISDN number (3).
                                     isdnnumbersNumber4 1.3.6.1.4.1.559.1.2.3.4.3.1.1.6 displaystring read-only
The ISDN number (4).
                                     isdnnumbersCall 1.3.6.1.4.1.559.1.2.3.4.3.1.1.7 integer read-write
If set to request, then call will be immediately made to this destination. Cancel will cancel any calls to this destination. Enumeration: 'cancel': 2, 'request': 1, 'false': 0.
                                     isdnnumbersTesttime 1.3.6.1.4.1.559.1.2.3.4.3.1.1.8 integer read-write
The time at which a test-call will be made (in seconds since midnight).
                                     isdnnumbersDays 1.3.6.1.4.1.559.1.2.3.4.3.1.1.9 displaystring read-write
Days of the week on which testcalls will be made, separated by colons. Use abbreviations : monday - Mo tuesday - Tu wednesday - We thursday - Th friday - Fr saturday - Sa sunday - Su eg saturday and sunday is Sa:Su .
                                     isdnnumbersLasttest 1.3.6.1.4.1.559.1.2.3.4.3.1.1.10 displaystring read-only
The Day/Month of the last successful testcall.
                                     isdnnumbersIpAddress 1.3.6.1.4.1.559.1.2.3.4.3.1.1.11 ipaddress read-write
The IP Address assigned to this port when routing is enabled.
                                     isdnnumbersIpMask 1.3.6.1.4.1.559.1.2.3.4.3.1.1.12 ipaddress read-write
The IP Address Mask assigned to this port when routing is enabled.
                                     isdnnumbersIpMetric 1.3.6.1.4.1.559.1.2.3.4.3.1.1.13 integer read-write
The IP routing metric assigned to this port when routing is enabled.
                                     isdnnumbersIpxNetwork 1.3.6.1.4.1.559.1.2.3.4.3.1.1.14 octet string read-write
The IPX Network Address assigned to this port when routing is enabled.
                                     isdnnumbersIpxType 1.3.6.1.4.1.559.1.2.3.4.3.1.1.15 integer read-write
The frame type used for IPX RIP and SAP messages emanating from this port. Enumeration: 'snap': 4, 'novell802dot3': 3, 'ieee802dot2': 2, 'ethernetII': 1.
                                     isdnnumbersPpp 1.3.6.1.4.1.559.1.2.3.4.3.1.1.16 integer read-write
Enable/Disable the PPP protocol for this number. Enumeration: 'enable': 1, 'disable': 2.
                                     isdnnumbersRemoteIpAddress 1.3.6.1.4.1.559.1.2.3.4.3.1.1.17 ipaddress read-write
The IP Address for the remote unit.
                                     isdnnumbersRemoteUnitType 1.3.6.1.4.1.559.1.2.3.4.3.1.1.18 integer read-write
The remote unit type. Enumeration: 'spider': 5, 'ascend': 4, 'cisco': 3, 'any': 1, 'n3com': 2.
                                     isdnnumbersHdlcType 1.3.6.1.4.1.559.1.2.3.4.3.1.1.19 integer read-write
The HDLC link type. Enumeration: 'lapb': 2, 'synchronous': 1.
                                     isdnnumbersPppAuthentication 1.3.6.1.4.1.559.1.2.3.4.3.1.1.20 integer read-only
The PPP negotiation status. Enumeration: 'pap': 2, 'both': 4, 'none': 1, 'chap': 3.
                                     isdnnumbersMaxCircuits 1.3.6.1.4.1.559.1.2.3.4.3.1.1.21 integer read-write
The max number of ISDN Circuits (1 or 2).
                                     isdnnumbersMPEnable 1.3.6.1.4.1.559.1.2.3.4.3.1.1.22 integer read-write
PPP Multilink. Enumeration: 'disabled': 1, 'enabled-bacp': 4, 'enabled-short-bacp': 5, 'enabled': 2, 'enabled-short': 3.
                                     isdnnumbersLearntED 1.3.6.1.4.1.559.1.2.3.4.3.1.1.23 displaystring read-only
Learnt endpoint descriminator.
                                     isdnnumbersMode 1.3.6.1.4.1.559.1.2.3.4.3.1.1.24 integer read-write
The Operation Required Enumeration: 'edit': 0, 'delete': 1.
                                     isdnnumbersCallType1 1.3.6.1.4.1.559.1.2.3.4.3.1.1.25 integer read-write
Enumeration: 'restricted': 1, 'unrestricted': 0, 'speech': 3, 'v110': 2.
                                     isdnnumbersCallType2 1.3.6.1.4.1.559.1.2.3.4.3.1.1.26 integer read-write
Enumeration: 'restricted': 1, 'unrestricted': 0, 'speech': 3, 'v110': 2.
                                     isdnnumbersCallType3 1.3.6.1.4.1.559.1.2.3.4.3.1.1.27 integer read-write
Enumeration: 'restricted': 1, 'unrestricted': 0, 'speech': 3, 'v110': 2.
                                     isdnnumbersCallType4 1.3.6.1.4.1.559.1.2.3.4.3.1.1.28 integer read-write
Enumeration: 'restricted': 1, 'unrestricted': 0, 'speech': 3, 'v110': 2.
                         isdnports 1.3.6.1.4.1.559.1.2.3.4.4
                             isdnportsTable 1.3.6.1.4.1.559.1.2.3.4.4.1 no-access
A table of isdn ports.
                                 isdnportsEntry 1.3.6.1.4.1.559.1.2.3.4.4.1.1 no-access
A table of isdn ports.
                                     isdnportsIndex 1.3.6.1.4.1.559.1.2.3.4.4.1.1.1 integer read-only
The physical port index, in the range 1 to number-of-ports, as found in the ports table.
                                     isdnportsDestination 1.3.6.1.4.1.559.1.2.3.4.4.1.1.2 displaystring read-only
The destination number that this ISDN number is connected to.
                                     isdnportsState 1.3.6.1.4.1.559.1.2.3.4.4.1.1.3 integer read-only
Current state of the port Enumeration: 'ringing': 2, 'answering': 4, 'calling': 1, 'answered': 5, 'idle': 0, 'connected': 3.
                                     isdnportsConnTime 1.3.6.1.4.1.559.1.2.3.4.4.1.1.4 timeticks read-only
The connection time (in hundredths of a second).
                                     isdnportsBackup 1.3.6.1.4.1.559.1.2.3.4.4.1.1.5 integer read-only
If set to true, then the call is a backup call. Enumeration: 'true': 1, 'false': 0.
                                     isdnportsDemand 1.3.6.1.4.1.559.1.2.3.4.4.1.1.6 integer read-only
If set to true, then the call is a demand call. Enumeration: 'true': 1, 'false': 0.
                                     isdnportsBumpable 1.3.6.1.4.1.559.1.2.3.4.4.1.1.7 integer read-only
If set to true, then the call is a bumpable call. Enumeration: 'true': 1, 'false': 0.
                                     isdnportsAlert 1.3.6.1.4.1.559.1.2.3.4.4.1.1.8 integer read-only
current Alert State Enumeration: 'beep': 2, 'none': 0, 'alert': 1.
                                     isdnportsPriority 1.3.6.1.4.1.559.1.2.3.4.4.1.1.9 integer read-only
current call priority
                                     isdnportsSourceMac 1.3.6.1.4.1.559.1.2.3.4.4.1.1.10 macaddress read-only
Source Mac of Bridge that requested the call
                         isdnhistory 1.3.6.1.4.1.559.1.2.3.4.5
                             isdnhistoryTable 1.3.6.1.4.1.559.1.2.3.4.5.1 no-access
A table of isdn ports.
                                 isdnhistoryEntry 1.3.6.1.4.1.559.1.2.3.4.5.1.1 no-access
A table of isdn ports.
                                     isdnhistoryIndex 1.3.6.1.4.1.559.1.2.3.4.5.1.1.1 integer read-only
The index of this ISDN history 1 to N.
                                     isdnhistoryDestination 1.3.6.1.4.1.559.1.2.3.4.5.1.1.2 displaystring read-only
The destination ISDN number.
                                     isdnhistoryTotalTime 1.3.6.1.4.1.559.1.2.3.4.5.1.1.3 timeticks read-only
Total Time of all calls to this destination (in hundredths of a second)
                                     isdnhistoryTotalCalls 1.3.6.1.4.1.559.1.2.3.4.5.1.1.4 integer read-only
The total number of calls to this destination
                                     isdnhistoryFailedCalls 1.3.6.1.4.1.559.1.2.3.4.5.1.1.5 integer read-only
The total number of failed calls to this destination
                         isdncla 1.3.6.1.4.1.559.1.2.3.4.6
                             isdnCliTable 1.3.6.1.4.1.559.1.2.3.4.6.1 no-access
A table of ISDN Numbers for bridges allowed to join the network.
                                 isdnCliEntry 1.3.6.1.4.1.559.1.2.3.4.6.1.1 no-access
A list of ISDN Numbers for authorised bridges.
                                     isdnCliIndex 1.3.6.1.4.1.559.1.2.3.4.6.1.1.1 integer read-write
The number of the entry.
                                     isdnCliNumber 1.3.6.1.4.1.559.1.2.3.4.6.1.1.2 displaystring read-write
The ISDN number of the bridge authorised to use the network.
                                     isdnCliMode 1.3.6.1.4.1.559.1.2.3.4.6.1.1.3 integer read-write
The Operation Required Enumeration: 'edit': 0, 'delete': 1.
                         isdnlists 1.3.6.1.4.1.559.1.2.3.4.7
                             isdnlistsTable 1.3.6.1.4.1.559.1.2.3.4.7.1 no-access
A table of isdn timeband bridge lists.
                                 isdnlistsEntry 1.3.6.1.4.1.559.1.2.3.4.7.1.1 no-access
A list of isdn bridge lists.
                                     isdnlistsIndex 1.3.6.1.4.1.559.1.2.3.4.7.1.1.1 integer read-write
The index of this bridge.
                                     isdnlistsBand 1.3.6.1.4.1.559.1.2.3.4.7.1.1.2 displaystring read-write
The timeband for this list. Set null-length string here to delete an entry.
                                     isdnlistsName 1.3.6.1.4.1.559.1.2.3.4.7.1.1.3 displaystring read-write
The name of this bridge.
                         isdnParams 1.3.6.1.4.1.559.1.2.3.4.8
                             isdnParamsNetworkType 1.3.6.1.4.1.559.1.2.3.4.8.1 integer read-write
ISDN Network Type. The device must be rebooted for a change of of this object to take effect. Enumeration: 'nationalIsdn1': 2, 'australia': 5, 'italy': 6, 'etsi': 1, 'att5essCustom': 3, 'usa-dms100': 8, 'japan-ins64': 9, 'germanyD64S': 7, 'germany1tr6': 4.
                             isdnParamsSpid1 1.3.6.1.4.1.559.1.2.3.4.8.2 displaystring read-write
Service Profile ID 1 (USA Network Types only).
                             isdnParamsSpid2 1.3.6.1.4.1.559.1.2.3.4.8.3 displaystring read-write
Service Profile ID 2 (USA Network Types only).
                             isdnParamsSpid3 1.3.6.1.4.1.559.1.2.3.4.8.4 displaystring read-write
Service Profile ID 1 (2nd TA - USA Network Types only).
                             isdnParamsSpid4 1.3.6.1.4.1.559.1.2.3.4.8.5 displaystring read-write
Service Profile ID 2 (2nd TA - USA Network Types only).
                             isdnParamsDirectoryNumber1 1.3.6.1.4.1.559.1.2.3.4.8.6 displaystring read-write
Directory Number 1 (USA Network Types only).
                             isdnParamsDirectoryNumber2 1.3.6.1.4.1.559.1.2.3.4.8.7 displaystring read-write
Directory Number 2 (USA Network Types only).
                             isdnParamsDirectoryNumber3 1.3.6.1.4.1.559.1.2.3.4.8.8 displaystring read-write
Directory Number 3 (2nd TA for USA Network Types only).
                             isdnParamsDirectoryNumber4 1.3.6.1.4.1.559.1.2.3.4.8.9 displaystring read-write
Directory Number 4 (2nd TA for USA Network Types only).
                             isdnParamsReportBusy 1.3.6.1.4.1.559.1.2.3.4.8.10 integer read-write
Send a positibe Busy reponse to an incoming call if no free port. Enumeration: 'enable': 2, 'disable': 1.
                             isdnParamsIncomingDov 1.3.6.1.4.1.559.1.2.3.4.8.11 integer read-write
Should an incoming voice call be answerred as a data call. Enumeration: 'answer': 2, 'disable': 1.
                             isdnParamsMaxCallTime 1.3.6.1.4.1.559.1.2.3.4.8.12 integer read-write
Maximum Call time in seconds.
                             isdnParamsMsn 1.3.6.1.4.1.559.1.2.3.4.8.13
                                   isdnParamsMsnLan 1.3.6.1.4.1.559.1.2.3.4.8.13.1 displaystring read-write
Multiple Subscriber Number for LAN access.
                                   isdnParamsMsnVoice 1.3.6.1.4.1.559.1.2.3.4.8.13.2 displaystring read-write
Multiple Subscriber Number for Voice access.
                                   isdnParamsMsnCheck 1.3.6.1.4.1.559.1.2.3.4.8.13.3 integer read-write
Should the incoming MSN be checked before answerring an incoming call. Enumeration: 'enable': 2, 'disable': 1.
                                   isdnParamsMsnSend 1.3.6.1.4.1.559.1.2.3.4.8.13.4 integer read-write
Should the MSN be sent in outgoing calls. Enumeration: 'enable': 2, 'disable': 1.
                             isdnParamsSubAddr 1.3.6.1.4.1.559.1.2.3.4.8.14
                                   isdnParamsSubAddrLan 1.3.6.1.4.1.559.1.2.3.4.8.14.1 displaystring read-write
Sub Address for LAN access.
                                   isdnParamsSubAddrVoice 1.3.6.1.4.1.559.1.2.3.4.8.14.2 displaystring read-write
Sub Address for Voice access.
                                   isdnParamsSubAddrCheck 1.3.6.1.4.1.559.1.2.3.4.8.14.3 integer read-write
Should the incoming Sub Address be checked before answerring an incoming call. Enumeration: 'enable': 2, 'disable': 1.
                                   isdnParamsSubAddrSend 1.3.6.1.4.1.559.1.2.3.4.8.14.4 integer read-write
Should the Sub Address be sent in outgoing calls. Enumeration: 'enable': 2, 'disable': 1.
                                   isdnParamsSubAddrType 1.3.6.1.4.1.559.1.2.3.4.8.14.5 integer read-write
What format should outgoing an Sub Address take. Enumeration: 'nsap': 1, 'user': 2.
                             isdnParamsTokenValue 1.3.6.1.4.1.559.1.2.3.4.8.15 integer read-write
ISDN time token value. When tokens are refilled, the isdnParamsTokenRemain variable is set to this value NOTE: -1 = disabled
                             isdnParamsTokenRefill 1.3.6.1.4.1.559.1.2.3.4.8.16 integer read-write
ISDN token Refill Mechanism type - 'disabled' No token mechanism. - 'manual' left for user to refill tokens manually. - 'auto' reset the tokens every day at 23:59.59 - 'refill' refills the tokens. NOTE: In order to set 'manuall and 'auto', isdnParamsTokenRemain must not be -1 (disabled) Enumeration: 'auto': 2, 'refill': 3, 'disable': 0, 'manual': 1.
                             isdnParamsTokenRemain 1.3.6.1.4.1.559.1.2.3.4.8.17 integer read-only
Displays the remaining number of ISDN tokens left for ISDN usage. NOTE: -1 = disabled
                         bootp 1.3.6.1.4.1.559.1.2.3.4.9
                             bootpActive 1.3.6.1.4.1.559.1.2.3.4.9.1 integer read-write
TRUE if BOOTP/DHCP broadcasts are to be bridged (when box is in bridge mode). TRUE if BOOTP/DHCP relay agent is to be active (when box is in router mode). If set, then DHCP Proxy and DHCP Server will be silent disabled. Enumeration: 'true': 1, 'false': 0.
                             bootpBumpable 1.3.6.1.4.1.559.1.2.3.4.9.2 integer read-write
(Bridge mode only) If we receive an autocall to another destination and no free channels, bump this call. Enumeration: 'true': 1, 'false': 0.
                             bootpIdle 1.3.6.1.4.1.559.1.2.3.4.9.3 integer read-write
(Bridge mode only) Number of seconds this call can be idle before call is dropped.
                             bootpIdleThreshold 1.3.6.1.4.1.559.1.2.3.4.9.4 integer read-write
(Bridge mode only) Idle is defined by the line being less than a certain activity. Full load is 1000.
                             bootpIsdnName 1.3.6.1.4.1.559.1.2.3.4.9.5 displaystring read-write
(Bridge mode only) The name of the ISDN telephone number entry to be called.
                             bootpAddress 1.3.6.1.4.1.559.1.2.3.4.9.6 ipaddress read-write
(Router mode only) The IP Address of the BOOTP/DHCP server. Format: xxx.xxx.xxx.xxx .
                             bootpDelaySecs 1.3.6.1.4.1.559.1.2.3.4.9.7 integer read-write
(Bridge mode or Router Mode) The age in seconds of a BOOTP/DHCP message after which the bridge or relay starts doing anything. Zero means no delay.
                             dhcpProxyActive 1.3.6.1.4.1.559.1.2.3.4.9.8 integer read-write
TRUE if the DHCP proxy is enabled. If set, then DHCP Relay and DHCP Server will be silent disabled. Enumeration: 'true': 1, 'false': 0.
                             referenceAddress 1.3.6.1.4.1.559.1.2.3.4.9.9 ipaddress read-write
(Router mode only) The refernece IP Address (giaddr) for the pool. Format: xxx.xxx.xxx.xxx .
                             minPoolSize 1.3.6.1.4.1.559.1.2.3.4.9.10 integer read-write
The minimum number of addresses in the pool.
                 traps 1.3.6.1.4.1.559.1.2.4
                     alarms 1.3.6.1.4.1.559.1.2.4.1
                         alarmCode 1.3.6.1.4.1.559.1.2.4.1.1 integer read-only
Error code for reported Alarm trap event. Enumeration: 'failed': 1.
                         alarmText 1.3.6.1.4.1.559.1.2.4.1.2 displaystring read-only
Explanatory text describing the event which caused the Alarm trap to be generated.
                     isdnFailCause 1.3.6.1.4.1.559.1.2.4.2
                         isdnFailDestination 1.3.6.1.4.1.559.1.2.4.2.1 displaystring read-only
Containins the ISDN destination dialled to cause the call to fail
                         q931FailCauseCode 1.3.6.1.4.1.559.1.2.4.2.2 integer read-only
Contains the cause of a failed Q931 ISDN call Enumeration: 'temporaryFailure': 41, 'normalCallClearing': 16, 'destinationOutOfOrder': 27, 'requestedCallIdentityCleared': 86, 'noAnswerFromUser': 19, 'incompatibleDestination': 88, 'userBusy': 17, 'dlFailureLineBroken': 145, 'callIdentityInUse': 84, 'unallocatedNumber': 1, 'numberChanged': 22, 'callRejected': 21, 'noUserResponding': 18, 'networkOutOfOrder': 38, 'switchingEquipmentCongestion': 42.
                         dass2FailCauseCode 1.3.6.1.4.1.559.1.2.4.2.3 integer read-only
Contains the cause of a failed DASS2 ISDN call Enumeration: 'terminalUnavailable46': 46, 'numberUnobtainable10': 10, 'numberIncomplete': 1, 'noReply': 31, 'lineOutOfService': 9, 'numberBusy': 8, 'numberUnobtainable30': 30, 'terminalUnavailable45': 45, 'cleared2': 2, 'numberUnobtainable4': 4, 'cleared48': 48, 'serviceTermination': 32, 'numberUnobtainable0': 0, 'userHasChangedNumber': 5, 'numberUnobtainable3': 3, 'networkBusy': 7, 'accessBarred': 11.
                         briFailCauseCode 1.3.6.1.4.1.559.1.2.4.2.4 integer read-only
Contains the cause of a failed DASS2 ISDN call
                     radius 1.3.6.1.4.1.559.1.2.4.3
                         radiusReplyCode 1.3.6.1.4.1.559.1.2.4.3.1 integer read-only
Contains the result of a call to RADIUS. Enumeration: 'radauthreadonly': 2, 'radauthreadwrite': 3, 'radauthnoresponse': 1, 'radauthreject': 0.
                         radiusUsername 1.3.6.1.4.1.559.1.2.4.3.2 displaystring read-only
This is the username authenticated by RADIUS.
                     login 1.3.6.1.4.1.559.1.2.4.4
                         loginCode 1.3.6.1.4.1.559.1.2.4.4.1 integer read-only
Contains the result of a login after no RADIUS server can be found. Enumeration: 'authreject': 0, 'authok': 1.
         registration 1.3.6.1.4.1.559.2
             regArpeggio 1.3.6.1.4.1.559.2.10
                   arpStandard 1.3.6.1.4.1.559.2.10.1
                   arpFocus 1.3.6.1.4.1.559.2.10.2
                   arpOffice 1.3.6.1.4.1.559.2.10.3
                   arpPlus 1.3.6.1.4.1.559.2.10.4
                   arpMultiLan 1.3.6.1.4.1.559.2.10.5
                   arpLite 1.3.6.1.4.1.559.2.10.6
                   arpPlusRPrimary 1.3.6.1.4.1.559.2.10.7
                   arpPlusRBasic 1.3.6.1.4.1.559.2.10.8
             officeConnect 1.3.6.1.4.1.559.2.13
                   officeConnectRemote510s 1.3.6.1.4.1.559.2.13.1
                   officeConnectRemote520s 1.3.6.1.4.1.559.2.13.2
                   officeConnectRemote530s 1.3.6.1.4.1.559.2.13.3
                   officeConnectRemote510u 1.3.6.1.4.1.559.2.13.4
                   officeConnectRemote520u 1.3.6.1.4.1.559.2.13.5
                   officeConnectRemote530u 1.3.6.1.4.1.559.2.13.6
                   officeConnectRemote531s 1.3.6.1.4.1.559.2.13.7
                   officeConnectRemote531u 1.3.6.1.4.1.559.2.13.8
             accessBuilder 1.3.6.1.4.1.559.2.14
                   accessBuilderRemoteUser400s 1.3.6.1.4.1.559.2.14.1
                   accessBuilderRemoteUser400u 1.3.6.1.4.1.559.2.14.2
                   accessBuilderInternet400s 1.3.6.1.4.1.559.2.14.3
                   accessBuilderInternet400u 1.3.6.1.4.1.559.2.14.4
                   accessBuilderRemoteOffice500 1.3.6.1.4.1.559.2.14.5
                   accessBuilderRemoteOffice600 1.3.6.1.4.1.559.2.14.6
                   accessBuilderRemoteOffice700 1.3.6.1.4.1.559.2.14.7
                   accessBuilder7000BriBridgeRouter 1.3.6.1.4.1.559.2.14.8
                   accessBuilder7000PriBridgeRouter 1.3.6.1.4.1.559.2.14.9
             serviceConnect2000 1.3.6.1.4.1.559.2.15
                   serviceConnect2000Base 1.3.6.1.4.1.559.2.15.1
                       serviceConnect2000BaseBri 1.3.6.1.4.1.559.2.15.1.1
                       serviceConnect2000BasePri 1.3.6.1.4.1.559.2.15.1.2
         cscmInfo 1.3.6.1.4.1.559.3
             cscmEventNumber 1.3.6.1.4.1.559.3.1 integer read-only
Contains the CSCM event number Enumeration: 'dass2numberBusy': 1208, 'testPollFailure': 105, 'q931networkOutOfOrder': 1038, 'dass2terminalUnavailable45': 1245, 'q931temporaryFailure': 1041, 'q931noAnswerFromUser': 1019, 'dass2networkBusy': 1207, 'pollSuccess': 101, 'q931unallocatedNumber': 1001, 'q931destinationOutOfOrder': 1027, 'pollFailure': 100, 'dass2numberUnobtainable4': 1204, 'q931userBusy': 1017, 'dass2numberUnobtainable3': 1203, 'dass2numberUnobtainable0': 1200, 'maxCallLengthExceeded': 104, 'dass2numberIncomplete': 1201, 'linkDown': 2, 'q931incompatibleDestination': 1088, 'dass2cleared2': 1202, 'dass2cleared48': 1248, 'q931noUserResponding': 1018, 'hourlyThresholdExceeded': 103, 'dass2serviceTermination': 1232, 'isdnDisconnection': 4, 'dass2accessBarred': 1211, 'isdnConnection': 3, 'dass2noReply': 1231, 'dass2userHasChangedNumber': 1205, 'linkUp': 1, 'q931callIdentityInUse': 1084, 'q931failure1000': 1000, 'q931requestedCallIdentityCleared': 1086, 'dass2numberUnobtainable30': 1230, 'q931normalCallClearing': 1016, 'dailyThresholdExceeded': 102, 'dass2terminalUnavailable46': 1246, 'q931switchingEquipmentCongestion': 1042, 'q931callRejected': 1021, 'q931dlFailureLineBroken': 1145, 'dass2lineOutOfService': 1209, 'dass2numberUnobtainable10': 1210, 'q931numberChanged': 1022.
             cscmOriginatingIP 1.3.6.1.4.1.559.3.2 ipaddress read-only
This is the IP address of the unit that caused the trap to be generated by CSCM
             cscmTrapDetail 1.3.6.1.4.1.559.3.3 displaystring read-only
This is the IP address of the unit that caused the trap to be generated by CSCM
           isdnTestCallEvent 1.3.6.1.4.1.5590.1
The isdnTestCallEvent Trap is sent whenever an ISDN test autocall is made, and is unsuccessful.
           isdnLinkDownEvent 1.3.6.1.4.1.5590.2
The isdnLinkEvent is sent whenever an ISDN Link has been disconnected. This should be used in conjunction with the associated MIBII object.
           isdnLinkUpEvent 1.3.6.1.4.1.5590.3
The isdnLinkEvent is sent whenever an ISDN Link has been established and dataflow is granted. This should be used in conjunction with the associated MIBII object.
           q931FailCauseEvent 1.3.6.1.4.1.5590.6
The q931FailCauseEvent is sent whenever a Q931 ISDN call is attempted but fails due to isdnFailCauseCode reason
           dass2FailCauseEvent 1.3.6.1.4.1.5590.7
The dassFailCauseEvent is sent whenever a DASS2 ISDN call is attempted but fails due to isdnFailCauseCode reason
           briFailCauseEvent 1.3.6.1.4.1.5590.8
The briFailCauseEvent is sent whenever a BRI ISDN call is attempted but fails due to isdnFailCauseCode reason
           radiusTrapEvent 1.3.6.1.4.1.5590.20
The RadiusTrapEvent is sent whenever a user attempts to log into a unit and RADIUS authentication is enabled. The RadiusReply indicates level of authentication granted to the user (if any). The RadiusUsername shows the username entered at the login prompt.
           loginTrapEvent 1.3.6.1.4.1.5590.21
The LoginTrapEvent is sent whenever a user attempts to log into a unit and RADIUS authentication fails. The boolean LoginCode indicates whether the user sucessfully logged in with the default password.
           cscmTrapEvent 1.3.6.1.4.1.5590.100
The cscmTrapEvent is sent by the CSCM management system whenever an event occurs for a unit on the system that has been setup with trap information and flagged to send it