REDSTONE-IP-TEMPLATE-MIB: View SNMP OID List / Download MIB

VENDOR: REDSTONE COMMUNICATIONS


 Home MIB: REDSTONE-IP-TEMPLATE-MIB
Download as:   
SNMPv2-CONF, REDSTONE-SMI, IF-MIB, SNMPv2-SMI, REDSTONE-TC, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rsIpTemplateMIB 1.3.6.1.4.1.2773.2.26
The IP Template MIB for the Redstone Communications Inc. enterprise.
       rsIpTemplateObjects 1.3.6.1.4.1.2773.2.26.1
           rsIpTemplate 1.3.6.1.4.1.2773.2.26.1.1
               rsIpTemplateTable 1.3.6.1.4.1.2773.2.26.1.1.1 no-access
The entries in this table describe templates for configuring IP interfaces.
                   rsIpTemplateEntry 1.3.6.1.4.1.2773.2.26.1.1.1.1 no-access
A template describing configuration of an IP interface.
                       rsIpTemplateId 1.3.6.1.4.1.2773.2.26.1.1.1.1.1 unsigned32 no-access
The integer identifier associated with this template. A value for this identifier is determined by locating or creating a template name in the rsTemplateNameTable.
                       rsIpTemplateRowStatus 1.3.6.1.4.1.2773.2.26.1.1.1.1.2 rowstatus read-only
Controls creation/deletion of entries in this table. Only the values 'createAndGo' and 'destroy' may be SET. The value of rsIpTemplateId must match that of a template name configured in rsTemplateNameTable.
                       rsIpTemplateRouterName 1.3.6.1.4.1.2773.2.26.1.1.1.1.3 rsname read-only
The virtual router to which an IP interface configured by this template will be assigned, if other mechanisms do not otherwise specify a virtual router assignment.
                       rsIpTemplateIpAddr 1.3.6.1.4.1.2773.2.26.1.1.1.1.4 ipaddress read-only
An IP address to be used by an IP interface configured by this template. This object will have a value of 0.0.0.0 for an unnumbered interface.
                       rsIpTemplateIpMask 1.3.6.1.4.1.2773.2.26.1.1.1.1.5 ipaddress read-only
An IP address mask to be used by an IP interface configured by this template. This object will have a value of 0.0.0.0 for an unnumbered interface.
                       rsIpTemplateDirectedBcastEnable 1.3.6.1.4.1.2773.2.26.1.1.1.1.6 rsenable read-only
Enable/disable forwarding of directed broadcasts on this IP network interface.
                       rsIpTemplateIcmpRedirectEnable 1.3.6.1.4.1.2773.2.26.1.1.1.1.7 rsenable read-only
Enable/disable transmission of ICMP Redirect messages on this IP network interface.
                       rsIpTemplateAccessRoute 1.3.6.1.4.1.2773.2.26.1.1.1.1.8 rsenable read-only
Enable/disable whether a host route is automatically created for a remote host attached to an IP interface that is configured using this template.
                       rsIpTemplateMtu 1.3.6.1.4.1.2773.2.26.1.1.1.1.9 integer32 read-only
The configured MTU size for this IP network interface. If set to zero, the default MTU size, as determined by the underlying network media, is used.
                       rsIpTemplateLoopbackIfIndex 1.3.6.1.4.1.2773.2.26.1.1.1.1.10 interfaceindexorzero read-only
For unnumbered interfaces, the IfIndex of the IP loopback interface whose IP address is used as the source address for transmitted IP packets. A value of zero means the loopback interface is unspecified (e.g., when the interface is numbered).
       rsIpTemplateMIBConformance 1.3.6.1.4.1.2773.2.26.4
           rsIpTemplateMIBCompliances 1.3.6.1.4.1.2773.2.26.4.1
               rsIpTemplateCompliance 1.3.6.1.4.1.2773.2.26.4.1.1
The compliance statement for systems supporting IP configuration templates.
           rsIpTemplateMIBGroups 1.3.6.1.4.1.2773.2.26.4.2
               rsIpTemplateGroup 1.3.6.1.4.1.2773.2.26.4.2.1
The basic collection of objects providing management of IP Template functionality in a Redstone product.