RC7586-MIB: View SNMP OID List / Download MIB

VENDOR: CODAN LIMITED


 Home MIB: RC7586-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, CODAN-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rc7586MIB 1.3.6.1.4.1.23304.2.2
The Structure of Management Information for the Codan enterprise. Copyright(c) 2009 All rights reserved
     buc1 1.3.6.1.4.1.23304.2.2.1
         buc1Configuration 1.3.6.1.4.1.23304.2.2.1.1
             buc1TxSettings 1.3.6.1.4.1.23304.2.2.1.1.1
                 buc1TxOn 1.3.6.1.4.1.23304.2.2.1.1.1.1 integer read-write
Sets Tx on/off. Respond -1 if buc1 not connected.
                 buc1TxDefault 1.3.6.1.4.1.23304.2.2.1.1.1.2 integer read-write
Sets Tx default 1-last 0-off. Respond -1 if buc1 not connected.
                 buc1TxAttenuator 1.3.6.1.4.1.23304.2.2.1.1.1.3 integer read-write
Sets/Gets Tx attenuation value in 1dBm steps. Respond -1 if buc1 not connected.
             buc1PktProtocol 1.3.6.1.4.1.23304.2.2.1.1.2
                 buc1Protocol 1.3.6.1.4.1.23304.2.2.1.1.2.1 integer read-write
Sets/Gets packet protocol 0 - ASCII, 1 - CODAN, 2 - SAbus, 3 - Comstream, 4 - NDSatcom. Respond -1 if buc1 not connected.
                 buc1Address 1.3.6.1.4.1.23304.2.2.1.1.2.2 integer read-write
Sets/Gets packet address: 0-31 NDSatcom ...Respond -1 if buc1 not connected.
             buc1RCSetting 1.3.6.1.4.1.23304.2.2.1.1.3
                 buc1Mode 1.3.6.1.4.1.23304.2.2.1.1.3.1 integer read-write
Sets/Gets redundancy mode 0-none, 1-warm, 2-hot. Respond -1 if buc1 not connected.
                 buc1OnLine 1.3.6.1.4.1.23304.2.2.1.1.3.2 truthvalue read-write
Sets/Gets redundancy mode on on/off line state. Respond -1 if buc1 not connected.
             buc1Freqs 1.3.6.1.4.1.23304.2.2.1.1.4
                 buc1RFFreq 1.3.6.1.4.1.23304.2.2.1.1.4.1 integer read-write
Sets/Gets the RBUC RF frequency. Respond -1 if buc1 not connected.
                 buc1IFFreq 1.3.6.1.4.1.23304.2.2.1.1.4.2 integer read-write
Sets/Gets the RBUC IF frequency. Respond -1 if buc1 not connected.
                 buc1LOFreq 1.3.6.1.4.1.23304.2.2.1.1.4.3 integer read-write
Sets/Gets the RBUC LO frequency. Respond -1 if buc1 not connected.
             buc1Misc 1.3.6.1.4.1.23304.2.2.1.1.5
                 buc1SerIf 1.3.6.1.4.1.23304.2.2.1.1.5.1 displaystring read-write
Sets/Gets serial interface - rate, length, parity, stop, terminate RS422/485. **** No respond - message if buc1 not connected.
                 buc1PwrAlarmThresh 1.3.6.1.4.1.23304.2.2.1.1.5.2 displaystring read-write
Sets/Gets power alarm threshold. **** No respond - message if buc1 not connected.
                 buc1BurstPwrThresh 1.3.6.1.4.1.23304.2.2.1.1.5.3 displaystring read-write
Sets/Gets burst power threshold. **** No respond - message if buc1 not connected.
                 buc1RefSource 1.3.6.1.4.1.23304.2.2.1.1.5.4 displaystring read-write
Sets/Gets reference source 0-external, 1-internal (Only for RBUC). **** No respond - message if buc1 not connected.
                 buc1LEDState 1.3.6.1.4.1.23304.2.2.1.1.5.5 displaystring read-write
Sets/Gets LEDs status on/off (Only for RBUC). **** No respond - message if buc1 not connected.
         buc1Status 1.3.6.1.4.1.23304.2.2.1.2
             buc1PaStatus 1.3.6.1.4.1.23304.2.2.1.2.1 integer read-only
Gets to 1 when PA is on. Respond -1 if buc1 not connected.
             buc1TxPower 1.3.6.1.4.1.23304.2.2.1.2.2 displaystring read-only
Gets Tx power format x.x dB. **** No respond - message if buc1 not connected.
             buc1TxBurstPower 1.3.6.1.4.1.23304.2.2.1.2.3 displaystring read-only
Gets Tx power. Format is x.x,y.y,z.z, where x.x is current burst power, y.y is min and z.z is max burts power. **** No respond - message if buc1 not connected.
             buc1Faults 1.3.6.1.4.1.23304.2.2.1.2.4 integer read-only
Gets the current fault status. Format - Bit0 PA fault, Bit1 Fan fault, Bit2 Power fault, Bit3 Temp fault, Bit4 10MHz fault, Bit5 Internal fault Bit6 LNB fault, Bit7 Red'cy Cont fault. Respond -1 if buc2 not connected.
             buc1LatchedFaults 1.3.6.1.4.1.23304.2.2.1.2.5 integer read-only
Gets the current latched faults. Format is same as Faults. Respond -1 if buc2 not connected.
             buc1Temperature 1.3.6.1.4.1.23304.2.2.1.2.6 displaystring read-only
Gets the BUC temperature. Format is x.x. **** No respond - message if buc1 not connected.
             buc1MinMaxTemperature 1.3.6.1.4.1.23304.2.2.1.2.7 displaystring read-only
Gets the BUC temperature. Format is x.x,y.y where x.x is max and y.y is min temperature. **** No respond - message if buc1 not connected.
             buc1SystemSetting 1.3.6.1.4.1.23304.2.2.1.2.8 integer read-only
Gets the current system status. Format is Bit0 - PA state, Bit1 - RS232 Tx, Bit2 - FSK Tx, Bit3 - RS485 Tx Bit4 - Redundancy mode, Bit5 - Online, Bit6..Bit7 - Redundancy cold or hot mode, Bit8 - HTTP Tx, Bit9 - TELNET Tx, Bit10 - SNMP Tx. Respond -1 if buc1 not connected.
             buc1SystemPoll 1.3.6.1.4.1.23304.2.2.1.2.9 integer read-only
Gets the system poll status. Format is Bit0 - Fault, Bit1 - System change. Respond -1 if buc1 not connected.
             buc1DeviceType 1.3.6.1.4.1.23304.2.2.1.2.10 displaystring read-only
Gets the device type. Format is X,Y where X is the model and Y is software version. **** No respond - message if buc1 not connected.
             buc1Gateway 1.3.6.1.4.1.23304.2.2.1.2.11 displaystring read-only
Gets the BUC gateway address (Only for RBUC). **** No respond - message if buc1 not connected.
             buc1IpAddress 1.3.6.1.4.1.23304.2.2.1.2.12 displaystring read-only
Gets the BUC IP address (Only for RBUC). **** No respond - message if buc1 not connected.
             buc1MACAddress 1.3.6.1.4.1.23304.2.2.1.2.13 displaystring read-only
Gets the BUC MAC address (Only for RBUC). **** No respond - message if buc1 not connected.
             buc1Netmask 1.3.6.1.4.1.23304.2.2.1.2.14 displaystring read-only
Gets the BUC netmask (Only for RBUC). **** No respond - message if buc1 not connected.
             buc1RefPower 1.3.6.1.4.1.23304.2.2.1.2.15 displaystring read-only
Gets the BUC reference power. **** No respond - message if buc1 not connected.
             buc1Config 1.3.6.1.4.1.23304.2.2.1.2.16 displaystring read-only
Gets the BUC configuration. **** No respond - message if buc1 not connected.
             buc1BuildStandard 1.3.6.1.4.1.23304.2.2.1.2.17 displaystring read-only
Gets the BUC build standard. **** No respond - message if buc1 not connected.
         buc1Info 1.3.6.1.4.1.23304.2.2.1.3
             buc1IdInfo 1.3.6.1.4.1.23304.2.2.1.3.1 displaystring read-only
Gets the module firmware revision, serial number and model. This string will have a zero length if the revision is unknown. **** No respond - message if buc1 not connected.
             buc1Limits 1.3.6.1.4.1.23304.2.2.1.3.2 displaystring read-only
Gets the limit data for the BUC. Format is: Power meter MIN/MAX , IF,RF and LO frequencies. This string will have a zero length if the revision is unknown. **** No respond - message if buc1 not connected.
             buc1PktProtocolsInfo 1.3.6.1.4.1.23304.2.2.1.3.3 displaystring read-only
Gets supported packet protocols and the corresponding address ranges. **** No respond - message if buc1 not connected.
     buc2 1.3.6.1.4.1.23304.2.2.2
         buc2Configuration 1.3.6.1.4.1.23304.2.2.2.1
             buc2TxSettings 1.3.6.1.4.1.23304.2.2.2.1.1
                 buc2TxOn 1.3.6.1.4.1.23304.2.2.2.1.1.1 integer read-write
Sets Tx on/off. Respond -1 if buc2 not connected.
                 buc2TxDefault 1.3.6.1.4.1.23304.2.2.2.1.1.2 integer read-write
Sets Tx default 1-last 0-off. Respond -1 if buc2 not connected.
                 buc2TxAttenuator 1.3.6.1.4.1.23304.2.2.2.1.1.3 integer read-write
Sets/Gets Tx attenuation value in 1dBm steps. Respond -1 if buc2 not connected.
             buc2PktProtocol 1.3.6.1.4.1.23304.2.2.2.1.2
                 buc2Protocol 1.3.6.1.4.1.23304.2.2.2.1.2.1 integer read-write
Sets/Gets packet protocol 0 - ASCII, 1 - CODAN, 2 - SAbus, 3 - Comstream, 4 - NDSatcom. Respond -1 if buc2 not connected.
                 buc2Address 1.3.6.1.4.1.23304.2.2.2.1.2.2 integer read-write
Sets/Gets packet address: 0-31 NDSatcom ...Respond -1 if buc2 not connected.
             buc2RCSetting 1.3.6.1.4.1.23304.2.2.2.1.3
                 buc2Mode 1.3.6.1.4.1.23304.2.2.2.1.3.1 integer read-write
Sets/Gets redundancy mode 0-none, 1-warm, 2-hot. Respond -1 if buc2 not connected.
                 buc2OnLine 1.3.6.1.4.1.23304.2.2.2.1.3.2 truthvalue read-write
Sets/Gets redundancy mode on on/off line state. Respond -1 if buc2 not connected.
             buc2Freqs 1.3.6.1.4.1.23304.2.2.2.1.4
                 buc2RFFreq 1.3.6.1.4.1.23304.2.2.2.1.4.1 integer read-write
Sets/Gets the RBUC RF frequency. Respond -1 if buc2 not connected.
                 buc2IFFreq 1.3.6.1.4.1.23304.2.2.2.1.4.2 integer read-write
Sets/Gets the RBUC IF frequency. Respond -1 if buc2 not connected.
                 buc2LOFreq 1.3.6.1.4.1.23304.2.2.2.1.4.3 integer read-write
Sets/Gets the RBUC LO frequency. Respond -1 if buc2 not connected.
             buc2Misc 1.3.6.1.4.1.23304.2.2.2.1.5
                 buc2SerIf 1.3.6.1.4.1.23304.2.2.2.1.5.1 displaystring read-write
Sets/Gets serial interface - rate, length, parity, stop, terminate RS422/485. **** No respond - message if buc2 not connected.
                 buc2PwrAlarmThresh 1.3.6.1.4.1.23304.2.2.2.1.5.2 displaystring read-write
Sets/Gets power alarm threshold. **** No respond - message if buc2 not connected.
                 buc2BurstPwrThresh 1.3.6.1.4.1.23304.2.2.2.1.5.3 displaystring read-write
Sets/Gets burst power threshold. **** No respond - message if buc2 not connected.
                 buc2RefSource 1.3.6.1.4.1.23304.2.2.2.1.5.4 displaystring read-write
Sets/Gets reference source 0-external, 1-internal (Only for RBUC). **** No respond - message if buc2 not connected.
                 buc2LEDState 1.3.6.1.4.1.23304.2.2.2.1.5.5 displaystring read-write
Sets/Gets LEDs status on/off (Only for RBUC). **** No respond - message if buc2 not connected.
         buc2Status 1.3.6.1.4.1.23304.2.2.2.2
             buc2PaStatus 1.3.6.1.4.1.23304.2.2.2.2.1 integer read-only
Gets to 1 when PA is on. Respond -1 if buc2 not connected.
             buc2TxPower 1.3.6.1.4.1.23304.2.2.2.2.2 displaystring read-only
Gets Tx power format x.x dB. **** No respond - message if buc2 not connected.
             buc2TxBurstPower 1.3.6.1.4.1.23304.2.2.2.2.3 displaystring read-only
Gets Tx power. Format is x.x,y.y,z.z, where x.x is current burst power, y.y is min and z.z is max burts power. **** No respond - message if buc2 not connected.
             buc2Faults 1.3.6.1.4.1.23304.2.2.2.2.4 integer read-only
Gets the current fault status. Format - Bit0 PA fault, Bit1 Fan fault, Bit2 Power fault, Bit3 Temp fault, Bit4 10MHz fault, Bit5 Internal fault Bit6 LNB fault, Bit7 Red'cy Cont fault. Respond -1 if buc2 not connected.
             buc2LatchedFaults 1.3.6.1.4.1.23304.2.2.2.2.5 integer read-only
Gets the current latched faults. Format is same as Faults. Respond -1 if buc2 not connected.
             buc2Temperature 1.3.6.1.4.1.23304.2.2.2.2.6 displaystring read-only
Gets the BUC temperature. Format is x.x. **** No respond - message if buc2 not connected.
             buc2MinMaxTemperature 1.3.6.1.4.1.23304.2.2.2.2.7 displaystring read-only
Gets the BUC temperature. Format is x.x,y.y where x.x is max and y.y is min temperature. **** No respond - message if buc2 not connected.
             buc2SystemSetting 1.3.6.1.4.1.23304.2.2.2.2.8 integer read-only
Gets the current system status. Format is Bit0 - PA state, Bit1 - RS232 Tx, Bit2 - FSK Tx, Bit3 - RS485 Tx Bit4 - Redundancy mode, Bit5 - Online, Bit6..Bit7 - Redundancy cold or hot mode, Bit8 - HTTP Tx, Bit9 - TELNET Tx, Bit10 - SNMP Tx. Respond -1 if buc2 not connected.
             buc2SystemPoll 1.3.6.1.4.1.23304.2.2.2.2.9 integer read-only
Gets the system poll status. Format is Bit0 - Fault, Bit1 - System change. Respond -1 if buc2 not connected.
             buc2DeviceType 1.3.6.1.4.1.23304.2.2.2.2.10 displaystring read-only
Gets the device type. Format is X,Y where X is the model and Y is software version. **** No respond - message if buc2 not connected.
             buc2Gateway 1.3.6.1.4.1.23304.2.2.2.2.11 displaystring read-only
Gets the BUC gateway address (Only for RBUC). **** No respond - message if buc2 not connected.
             buc2IpAddress 1.3.6.1.4.1.23304.2.2.2.2.12 displaystring read-only
Gets the BUC IP address (Only for RBUC). **** No respond - message if buc2 not connected.
             buc2MACAddress 1.3.6.1.4.1.23304.2.2.2.2.13 displaystring read-only
Gets the BUC MAC address (Only for RBUC). **** No respond - message if buc2 not connected.
             buc2Netmask 1.3.6.1.4.1.23304.2.2.2.2.14 displaystring read-only
Gets the BUC netmask (Only for RBUC). **** No respond - message if buc2 not connected.
             buc2RefPower 1.3.6.1.4.1.23304.2.2.2.2.15 displaystring read-only
Gets the BUC reference power. **** No respond - message if buc2 not connected.
             buc2Config 1.3.6.1.4.1.23304.2.2.2.2.16 displaystring read-only
Gets the BUC configuration. **** No respond - message if buc2 not connected.
             buc2BuildStandard 1.3.6.1.4.1.23304.2.2.2.2.17 displaystring read-only
Gets the BUC build standard. **** No respond - message if buc2 not connected.
         buc2Info 1.3.6.1.4.1.23304.2.2.2.3
             buc2IdInfo 1.3.6.1.4.1.23304.2.2.2.3.1 displaystring read-only
Gets the module firmware revision, serial number and model. This string will have a zero length if the revision is unknown. **** No respond - message if buc2 not connected.
             buc2Limits 1.3.6.1.4.1.23304.2.2.2.3.2 displaystring read-only
Gets the limit data for the BUC. Format is: Power meter MIN/MAX , IF,RF and LO frequencies. This string will have a zero length if the revision is unknown. **** No respond - message if buc2 not connected.
             buc2PktProtocolsInfo 1.3.6.1.4.1.23304.2.2.2.3.3 displaystring read-only
Gets supported packet protocols and the corresponding address ranges. **** No respond - message if buc2 not connected.
     ctrl 1.3.6.1.4.1.23304.2.2.3
         settings 1.3.6.1.4.1.23304.2.2.3.1
             operationalMode 1.3.6.1.4.1.23304.2.2.3.1.1 integer read-write
Sets 7586 operational mode - Auto, Manual Stream1, Stream2.
             onlineStream 1.3.6.1.4.1.23304.2.2.3.1.2 integer read-write
Sets the online stream.
             waveguideSwitch 1.3.6.1.4.1.23304.2.2.3.1.3 integer read-write
Sets Waveguide switch Rx+Tx, Rx/Tx and Tx Only.
             startupTime 1.3.6.1.4.1.23304.2.2.3.1.4 integer read-write
Sets Startup time.
             lnbCurrentLimit 1.3.6.1.4.1.23304.2.2.3.1.5 displaystring read-write
Sets LNB current limits.
             ledState 1.3.6.1.4.1.23304.2.2.3.1.6 integer read-write
Sets 7586 LED.
             refSource 1.3.6.1.4.1.23304.2.2.3.1.7 integer read-write
Sets 7586 reference state.
             refTrim 1.3.6.1.4.1.23304.2.2.3.1.8 displaystring read-write
Sets 7586 reference trim.
             refThresh 1.3.6.1.4.1.23304.2.2.3.1.9 displaystring read-write
Sets 7586 reference alarm treshold.
             refPwr 1.3.6.1.4.1.23304.2.2.3.1.10 displaystring read-only
Gets 7586 reference power.
             ipAddr 1.3.6.1.4.1.23304.2.2.3.1.11 displaystring read-only
Gets the 7586 IP address.
             macAddress 1.3.6.1.4.1.23304.2.2.3.1.12 displaystring read-only
Gets the 7586 MAC address.
             netmask 1.3.6.1.4.1.23304.2.2.3.1.13 displaystring read-only
Gets the 7586 netmask.
             gateway 1.3.6.1.4.1.23304.2.2.3.1.14 displaystring read-only
Gets the 7586 gateway address.
         status 1.3.6.1.4.1.23304.2.2.3.2
             lnbCurrent 1.3.6.1.4.1.23304.2.2.3.2.1 displaystring read-only
Sets 7586 LNB current.
             lnbVoltage 1.3.6.1.4.1.23304.2.2.3.2.2 displaystring read-only
Sets 7586 LNB voltage.
             faults 1.3.6.1.4.1.23304.2.2.3.2.3 integer read-only
Gets the current fault status.
         info 1.3.6.1.4.1.23304.2.2.3.3
             idInfo 1.3.6.1.4.1.23304.2.2.3.3.1 displaystring read-only
Gets the module firmware revision, serial number and model. This string will have a zero length if the revision is unknown.