RC-CFM-MIB: View SNMP OID List / Download MIB

VENDOR: RAPID CITY COMMUNICATION


 Home MIB: RC-CFM-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, Q-BRIDGE-MIB, RAPID-CITY, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rcCfmMib 1.3.6.1.4.1.2272.1.69.0
OE MIB for Connectivity Fault Management
 rcCfmMaintenanceDomainTable 1.3.6.1.4.1.2272.1.69.1 no-access
Connectivity Fault Management Maintenance Domain table
     rcCfmMaintenanceDomainEntry 1.3.6.1.4.1.2272.1.69.1.1 no-access
Connectivity Fault Management Maintenance Domain entry.
         rcCfmMaintenanceDomainIndex 1.3.6.1.4.1.2272.1.69.1.1.1 integer32 no-access
Maintenance Domain index
         rcCfmMaintenanceDomainName 1.3.6.1.4.1.2272.1.69.1.1.2 displaystring read-only
Maintenance Domain Name
         rcCfmMaintenanceDomainRowStatus 1.3.6.1.4.1.2272.1.69.1.1.3 rowstatus read-only
Used to create/delete entries
         rcCfmMaintenanceDomainNumOfMa 1.3.6.1.4.1.2272.1.69.1.1.4 integer32 read-only
Used to indicate the number of MAs belong to this maintenance domain
         rcCfmMaintenanceDomainClearStats 1.3.6.1.4.1.2272.1.69.1.1.5 truthvalue read-only
To clear the MEPS CCM sending/receiving message counter un der this domain
         rcCfmMaintenanceDomainLevel 1.3.6.1.4.1.2272.1.69.1.1.6 integer32 read-write
To set the maintenance level in this domain
         rcCfmMaintenanceDomainNumOfMip 1.3.6.1.4.1.2272.1.69.1.1.7 integer32 read-only
Used to indicate the number of Mips belong to this maintenance domain
         rcCfmMaintenanceDomainType 1.3.6.1.4.1.2272.1.69.1.1.8 integer read-only
To indicate the type of domain Enumeration: 'none': 0, 'nodal': 7, 'vlan': 4, 'trunk': 1, 'mimencapvlan': 6, 'sg': 2, 'port': 5, 'endpt': 3.
         rcCfmMaintenanceDomainEventTrapEnable 1.3.6.1.4.1.2272.1.69.1.1.9 enablevalue read-only
Event Trap enable
         rcCfmMaintenanceDomainPmEnable 1.3.6.1.4.1.2272.1.69.1.1.10 enablevalue read-only
Performance monitor enable
         rcCfmMaintenanceDomainClearAisStats 1.3.6.1.4.1.2272.1.69.1.1.11 truthvalue read-write
To clear the AIS CCM sending/receiving message counter un der this domain
 rcCfmMaintenanceAssociationTable 1.3.6.1.4.1.2272.1.69.2 no-access
Connectivity Fault Management Maintenance Association table
     rcCfmMaintenanceAssociationEntry 1.3.6.1.4.1.2272.1.69.2.1 no-access
Connectivity Fault Management Maintenance Association entry.
         rcCfmMaintenanceAssociationDomainIndex 1.3.6.1.4.1.2272.1.69.2.1.1 integer32 no-access
Maintenance Association Domain Index
         rcCfmMaintenanceAssociationAssociationIndex 1.3.6.1.4.1.2272.1.69.2.1.2 integer32 no-access
Maintenance Association Index
         rcCfmMaintenanceAssociationDomainName 1.3.6.1.4.1.2272.1.69.2.1.3 displaystring read-only
Maintenance Association Domain Name
         rcCfmMaintenanceAssociationAssociationName 1.3.6.1.4.1.2272.1.69.2.1.4 displaystring read-only
Maintenance Association Name
         rcCfmMaintenanceAssociationAdminState 1.3.6.1.4.1.2272.1.69.2.1.5 enablevalue read-only
Administratively enable or disable a maintenance association.
         rcCfmMaintenanceAssociationRowStatus 1.3.6.1.4.1.2272.1.69.2.1.6 rowstatus read-only
Used to create/delete entries
         rcCfmMaintenanceAssociationCcmInterval 1.3.6.1.4.1.2272.1.69.2.1.7 integer32 read-only
Interval of periodic Continuity Check Message to be transmitted
         rcCfmMaintenanceAssociationCcmLifetime 1.3.6.1.4.1.2272.1.69.2.1.8 integer32 read-only
Lifetime of periodic Continuity Check Message
         rcCfmMaintenanceAssociationCcmPriority 1.3.6.1.4.1.2272.1.69.2.1.9 integer32 read-only
Priority of Continuity Check Message to be transmitted
         rcCfmMaintenanceAssociationCcmTxEnable 1.3.6.1.4.1.2272.1.69.2.1.10 enablevalue read-only
Continuity Check Message transmit enable
         rcCfmMaintenanceAssociationCcmRxEnable 1.3.6.1.4.1.2272.1.69.2.1.11 enablevalue read-only
Continuity Check Message receive enable
         rcCfmMaintenanceAssociationNumOfMep 1.3.6.1.4.1.2272.1.69.2.1.12 integer32 read-only
Used to indicate the number of MEPs belong to this maintenance association
         rcCfmMaintenanceAssociationClearStats 1.3.6.1.4.1.2272.1.69.2.1.13 truthvalue read-only
To clear the MEPs CCM sending/receiving message counter under this MA
         rcCfmMaintenanceAssociationAutoDetect 1.3.6.1.4.1.2272.1.69.2.1.14 enablevalue read-only
Indicates whether MA allows auto-detect of remote MEPs
         rcCfmMaintenanceAssociationNumOfRemoteMep 1.3.6.1.4.1.2272.1.69.2.1.15 integer32 read-only
Used to indicate the number of remote MEPs belong to this maintenance association
         rcCfmMaintenanceAssociationRemoveAutoRmep 1.3.6.1.4.1.2272.1.69.2.1.16 integer32 read-only
Remove auto learned Remote Maintenance Endpoint ID, or 0 for unspecified
         rcCfmMaintenanceAssociationCcmRdiEnable 1.3.6.1.4.1.2272.1.69.2.1.17 enablevalue read-only
Continuity Check Message RDI enable
         rcCfmMaintenanceAssociationCcmMulticast 1.3.6.1.4.1.2272.1.69.2.1.18 enablevalue read-only
Indicates whether MA sends Multicast or Unicast CCMs
         rcCfmMaintenanceAssociationEventTrapEnable 1.3.6.1.4.1.2272.1.69.2.1.19 enablevalue read-only
Event Trap enable This MA level setting overrides MD level setting.
         rcCfmMaintenanceAssociationPmEnable 1.3.6.1.4.1.2272.1.69.2.1.20 enablevalue read-only
Performance monitor enable This MA level setting overrides MD level setting.
         rcCfmMaintenanceAssociationClearAisStats 1.3.6.1.4.1.2272.1.69.2.1.21 truthvalue read-write
To clear the Ais CCM sending/receiving message counter under this MA
 rcCfmMaintenanceEndPointTable 1.3.6.1.4.1.2272.1.69.3 no-access
Connectivity Fault Management Maintenance Association table
     rcCfmMaintenanceEndPointEntry 1.3.6.1.4.1.2272.1.69.3.1 no-access
Connectivity Fault Management Maintenance EndPoint entry.
         rcCfmMaintenanceEndPointDomainIndex 1.3.6.1.4.1.2272.1.69.3.1.1 integer32 no-access
Maintenance Domain Name
         rcCfmMaintenanceEndPointAssociationIndex 1.3.6.1.4.1.2272.1.69.3.1.2 integer32 no-access
Maintenance Association Name
         rcCfmMaintenanceEndPointId 1.3.6.1.4.1.2272.1.69.3.1.3 integer32 no-access
Maintenance EndPoint ID
         rcCfmMaintenanceEndPointDomainName 1.3.6.1.4.1.2272.1.69.3.1.4 displaystring read-only
Maintenance Domain Name
         rcCfmMaintenanceEndPointAssociationName 1.3.6.1.4.1.2272.1.69.3.1.5 displaystring read-only
Maintenance Association Name
         rcCfmMaintenanceEndPointAdminState 1.3.6.1.4.1.2272.1.69.3.1.6 enablevalue read-only
Administratively enable or disable a maintenance EndPoint.
         rcCfmMaintenanceEndPointRowStatus 1.3.6.1.4.1.2272.1.69.3.1.7 rowstatus read-only
Used to create/delete entries
         rcCfmMaintenanceEndPointCcmPriority 1.3.6.1.4.1.2272.1.69.3.1.8 integer32 read-only
Priority of Continuity Check Message to be transmitted
         rcCfmMaintenanceEndPointCcmTxEnable 1.3.6.1.4.1.2272.1.69.3.1.9 enablevalue read-only
Continuity Check Message transmit enable
         rcCfmMaintenanceEndPointCcmRxEnable 1.3.6.1.4.1.2272.1.69.3.1.10 enablevalue read-only
Continuity Check Message receive enable
         rcCfmMaintenanceEndPointMepType 1.3.6.1.4.1.2272.1.69.3.1.11 integer read-only
Mep Type Enumeration: 'remotesg': 32770, 'endptClient': 64, 'remotePort': 32800, 'remoteEndptClient': 32832, 'vlan': 16, 'nodal': 3145728, 'remotetrunk': 32769, 'unused': 8, 'remoteendpt': 32772, 'trunk': 1, 'remoteVlan': 32784, 'sg': 2, 'port': 32, 'endpt': 4.
         rcCfmMaintenanceEndPointClearStats 1.3.6.1.4.1.2272.1.69.3.1.12 truthvalue read-only
To clear the MEP CCM sending/receiving message counter
         rcCfmMaintenanceEndPointServiceDescription 1.3.6.1.4.1.2272.1.69.3.1.13 displaystring read-only
Used to specify what service this mep assigned to
         rcCfmMaintenanceEndPointRemoveAutoRmep 1.3.6.1.4.1.2272.1.69.3.1.14 integer32 read-only
Remove auto learned Remote Maintenance Endpoint ID, or 0 for unspecified
         rcCfmMaintenanceEndPointMepStatus 1.3.6.1.4.1.2272.1.69.3.1.15 integer read-only
Indicating if the mep status is active or inactive. Only Dual-Home Ring endpoint client meps can have active/inactive status. All other mep types have active status. Enumeration: 'active': 1, 'inactive': 2.
         rcCfmMaintenanceEndPointAisTxEnable 1.3.6.1.4.1.2272.1.69.3.1.16 enablevalue read-only
Alarm Indication Signal Message transmit enable
         rcCfmMaintenanceEndPointAisInterval 1.3.6.1.4.1.2272.1.69.3.1.17 integer read-only
Interval of periodic Alarm Indication Signal Message to be transmitted. Unit in milliseconds. Enumeration: 'intv60000': 60000, 'intv1000': 1000.
         rcCfmMaintenanceEndPointIfTlv 1.3.6.1.4.1.2272.1.69.3.1.18 enablevalue read-only
Admin control of the Interface-Status-Tlv in maintenanceEndpoint.
         rcCfmMaintenanceEndPointMepDirection 1.3.6.1.4.1.2272.1.69.3.1.19 integer read-only
Indicates the direction in which the Maintenance association faces on the bridge port. Enumeration: 'down': 2, 'unknown': 3, 'up': 1.
         rcCfmMaintenanceEndPointClearAisStats 1.3.6.1.4.1.2272.1.69.3.1.20 truthvalue read-only
To clear the AIS sending/receiving message counter
         rcCfmMaintenanceEndPointIfIndex 1.3.6.1.4.1.2272.1.69.3.1.21 interfaceindexorzero read-only
This object is the interface index of the interface either a bridge port, or an aggregated IEEE 802.1 link within a bridge port, to which the MEP is attached.
         rcCfmMaintenanceEndPointCcmVlanId 1.3.6.1.4.1.2272.1.69.3.1.22 vlanidornone read-only
Customer CCM VLAN ID
         rcCfmMaintenanceEndPointLabel 1.3.6.1.4.1.2272.1.69.3.1.23 displaystring read-only
User provided field. Used to give extra management information/data.
 rcCfmTrunkGroupTable 1.3.6.1.4.1.2272.1.69.4 no-access
Connectivity Fault TrunkGroup table
     rcCfmTrunkGroupEntry 1.3.6.1.4.1.2272.1.69.4.1 no-access
Connectivity Fault Management TrunkGroup entry.
         rcCfmTrunkGroupName 1.3.6.1.4.1.2272.1.69.4.1.1 cfmnamestring no-access
Trunk Group Name
         rcCfmTrunkGroupRowStatus 1.3.6.1.4.1.2272.1.69.4.1.2 rowstatus read-only
Used to create/delete entries
         rcCfmTrunkGroupPrimaryTrunk 1.3.6.1.4.1.2272.1.69.4.1.3 displaystring read-only
Trunk Group PBT Primary Trunk Name
         rcCfmTrunkGroupSecondaryTrunk 1.3.6.1.4.1.2272.1.69.4.1.4 displaystring read-only
Trunk Group PBT Secondary Trunk Name
         rcCfmTrunkGroupActiveTrunk 1.3.6.1.4.1.2272.1.69.4.1.5 displaystring read-only
Trunk Group PBT Active Trunk Name
         rcCfmTrunkGroupRevertive 1.3.6.1.4.1.2272.1.69.4.1.6 enablevalue read-only
Revertive enable or disable
         rcCfmTrunkGroupLoopBackVlanId 1.3.6.1.4.1.2272.1.69.4.1.7 integer32 read-only
Loopback VLAN ID for local pbt switching
         rcCfmTrunkGroupUserLabel1 1.3.6.1.4.1.2272.1.69.4.1.8 octet string read-write
User provided field. Used to give extra management information/data
         rcCfmTrunkGroupUserLabel2 1.3.6.1.4.1.2272.1.69.4.1.9 octet string read-write
User provided additional field. Used to give extra management information/data
 rcCfmTrunkTable 1.3.6.1.4.1.2272.1.69.5 no-access
Connectivity Fault Trunk table
     rcCfmTrunkEntry 1.3.6.1.4.1.2272.1.69.5.1 no-access
Connectivity Fault Management Trunk entry.
         rcCfmTrunkName 1.3.6.1.4.1.2272.1.69.5.1.1 cfmnamestring no-access
PBT Trunk Name
         rcCfmTrunkPort 1.3.6.1.4.1.2272.1.69.5.1.2 interfaceindex read-only
PBT Trunk Port
         rcCfmTrunkAdminState 1.3.6.1.4.1.2272.1.69.5.1.3 enablevalue read-only
Administratively enable or disable a PBT trunk.
         rcCfmTrunkRowStatus 1.3.6.1.4.1.2272.1.69.5.1.4 rowstatus read-only
Used to create/delete entries
         rcCfmTrunkMac 1.3.6.1.4.1.2272.1.69.5.1.5 macaddress read-only
Trunk Mac (remote CP mac)
         rcCfmTrunkMdName 1.3.6.1.4.1.2272.1.69.5.1.6 displaystring read-only
PBT Trunk Maintenance Domain Name
         rcCfmTrunkMaName 1.3.6.1.4.1.2272.1.69.5.1.7 displaystring read-only
PBT Trunk Maintenance Association Name
         rcCfmTrunkVlanId 1.3.6.1.4.1.2272.1.69.5.1.8 integer32 read-only
PBT trunk VLAN ID
         rcCfmTrunkReverseVlanId 1.3.6.1.4.1.2272.1.69.5.1.9 integer32 read-only
PBT trunk reverse VLAN ID
         rcCfmTrunkMepId 1.3.6.1.4.1.2272.1.69.5.1.10 integer32 read-only
PBT trunk MEP ID. Range 1-8191 is a valid Mep ID to be assigned to the CFM Trunk. '0' means unassign the Med ID from the CFM Trunk
         rcCfmTrunkHoldTimer 1.3.6.1.4.1.2272.1.69.5.1.11 integer32 read-only
Trunk hold timer value.
         rcCfmTrunkOperStatus 1.3.6.1.4.1.2272.1.69.5.1.12 integer read-only
The current operational status of this trunk. Enumeration: 'down': 2, 'waiting': 3, 'up': 1.
         rcCfmTrunkSourceMac 1.3.6.1.4.1.2272.1.69.5.1.13 macaddress read-only
Trunk Source Mac (local switch PBT mac)
         rcCfmTrunkClearStats 1.3.6.1.4.1.2272.1.69.5.1.14 truthvalue read-only
Action to clear the stats for all trunks
         rcCfmTrunkUserLabel1 1.3.6.1.4.1.2272.1.69.5.1.15 octet string read-write
User provided field. Used to give extra management information/data
         rcCfmTrunkUserLabel2 1.3.6.1.4.1.2272.1.69.5.1.16 octet string read-write
User provided additional field. Used to give extra management information/data
         rcCfmTrunkSubportQueueSet 1.3.6.1.4.1.2272.1.69.5.1.17 integer32 read-only
Subport Queue Set Index Number
         rcCfmTrunkDualHomePartner 1.3.6.1.4.1.2272.1.69.5.1.18 enablevalue read-only
Enable PBT trunk as Dual Home Partner
 rcCfmServiceGroupTable 1.3.6.1.4.1.2272.1.69.6 no-access
Connectivity Fault Service Group table
     rcCfmServiceGroupEntry 1.3.6.1.4.1.2272.1.69.6.1 no-access
Connectivity Fault Management ServiceGroup entry.
         rcCfmServiceGroupName 1.3.6.1.4.1.2272.1.69.6.1.1 cfmnamestring no-access
PBT ServiceGroup Name
         rcCfmServiceGroupPort 1.3.6.1.4.1.2272.1.69.6.1.2 interfaceindex read-only
PBT ServiceGroup Port
         rcCfmServiceGroupAdminState 1.3.6.1.4.1.2272.1.69.6.1.3 enablevalue read-only
Administratively enable or disable a PBT Service Group.
         rcCfmServiceGroupRowStatus 1.3.6.1.4.1.2272.1.69.6.1.4 rowstatus read-only
Used to create/delete entries
         rcCfmServiceGroupMac 1.3.6.1.4.1.2272.1.69.6.1.5 macaddress read-only
ServiceGroup Mac (remote mac of NPU)
         rcCfmServiceGroupMdName 1.3.6.1.4.1.2272.1.69.6.1.6 displaystring read-only
PBT ServiceGroup Maintenance Domain Name
         rcCfmServiceGroupMaName 1.3.6.1.4.1.2272.1.69.6.1.7 displaystring read-only
PBT ServiceGroup Maintenance Association Name
         rcCfmServiceGroupTgName 1.3.6.1.4.1.2272.1.69.6.1.8 displaystring read-only
PBT ServiceGroup Trunk Group Name
         rcCfmServiceGroupMepId 1.3.6.1.4.1.2272.1.69.6.1.9 integer32 read-only
PBT ServiceGroup MEP ID. Range 1-8191 is a valid Mep ID to be assigned to the CFM Service group. '0' means unassign the Med ID from the CFM service group
         rcCfmServiceGroupRingId 1.3.6.1.4.1.2272.1.69.6.1.10 integer32 read-only
Ring ID associated with Service Group
         rcCfmServiceGroupCcmOperStatus 1.3.6.1.4.1.2272.1.69.6.1.11 integer read-only
The current CCM operational status of this service group. Enumeration: 'down': 2, 'up': 1.
 rcCfmPbt 1.3.6.1.4.1.2272.1.69.7
     rcCfmPbtVlans 1.3.6.1.4.1.2272.1.69.7.1 octet string read-write
Connectivity Fault Management PBT vlan entry.
     rcCfmPbtMsti 1.3.6.1.4.1.2272.1.69.7.2 integer32 read-write
MSTI instance ID for PBT VLANS
 rcCfmStatsTable 1.3.6.1.4.1.2272.1.69.8 no-access
CFM stats table
     rcCfmStatsEntry 1.3.6.1.4.1.2272.1.69.8.1 no-access
CFM Stats table entry. Contain CFM Message sending/receiving and missing counter
         rcCfmStatsDomainIndex 1.3.6.1.4.1.2272.1.69.8.1.1 integer32 no-access
Maintenance Domain Name
         rcCfmStatsAssociationIndex 1.3.6.1.4.1.2272.1.69.8.1.2 integer32 no-access
Maintenance Association Name
         rcCfmStatsDomainName 1.3.6.1.4.1.2272.1.69.8.1.3 displaystring read-only
Maintenance Domain Name
         rcCfmStatsAssociationName 1.3.6.1.4.1.2272.1.69.8.1.4 displaystring read-only
Maintenance Association Name
         rcCfmStatsMepId 1.3.6.1.4.1.2272.1.69.8.1.5 integer32 no-access
Maintenance EndPoint ID
         rcCfmStatsTxCnt 1.3.6.1.4.1.2272.1.69.8.1.6 counter64 read-only
The total Number of CFM messages are transmitted by trunk or ESM port
         rcCfmStatsRxCnt 1.3.6.1.4.1.2272.1.69.8.1.7 counter64 read-only
The total Number of CFM messages are received by trunk or ESM port
         rcCfmStatsRxZeroCnt 1.3.6.1.4.1.2272.1.69.8.1.8 counter64 read-only
The total Number of CFM messages are received by trunk or ESM port
         rcCfmStatsMissedCnt 1.3.6.1.4.1.2272.1.69.8.1.9 counter64 read-only
The total Number of CFM messages are missing on trunk or ESM port
         rcCfmStatsUpTimeCnt 1.3.6.1.4.1.2272.1.69.8.1.10 counter64 read-only
The total Time of CFM messages are UP on trunk or ESM port in milliseconds
         rcCfmStatsDefect 1.3.6.1.4.1.2272.1.69.8.1.11 integer32 read-only
An enumerated value indicating the highest-priority defect that has been present since the MEP Fault Notification Generate State Machine was last in the FNG_RESET state, either: 1) DefRDICCM: The last CCM received by this MEP from some remote MEP contained the RDI bit. 2) DefMACstats: The last CCM received by this MEP from some remote MEP indicated that the transmitting MEP's associated MAC is reporting an error status. 3) DefRemoteCCM: This MEP is not receiving CCMs from some other MEP in its configured list. 4) DefErrorCCM: This MEP is receiving invalid CCMs. 5) DefXconCCM: This MEP is receiving CCMs that could be from some other MA.
         rcCfmStatsAisTxCnt 1.3.6.1.4.1.2272.1.69.8.1.12 counter64 read-only
The total Number of AIS messages transmitted by Client Mep on Port/MLT
         rcCfmStatsAisRxCnt 1.3.6.1.4.1.2272.1.69.8.1.13 counter64 read-only
The total Number of AIS messages received by Client Mep on Port/MLT
         rcCfmStatsAisOperState 1.3.6.1.4.1.2272.1.69.8.1.14 integer read-only
To indicate the operational status of AIS. It is set to true when AIS is transmitted. It is set to false when AIS is cleared. Enumeration: 'false': 2, 'true': 1.
         rcCfmStatsAisMipLevel 1.3.6.1.4.1.2272.1.69.8.1.15 integer32 read-only
This is Maintenance Domain Level of the MIP on which the AIS is transmitted.
         rcCfmStatsIfTlvTx 1.3.6.1.4.1.2272.1.69.8.1.16 integer read-only
To indicate the operational state of Interface Status TLV transmitted on MaintenanceEndpoint. This status indicates that the state of the local UNI Port. Enumeration: 'dormant': 7, 'none': 1, 'lowerLayerDown': 4, 'unknown': 6, 'testing': 5, 'up': 2, 'down': 3, 'notpresent': 8.
         rcCfmStatsAccessDrops 1.3.6.1.4.1.2272.1.69.8.1.17 counter64 read-only
The total number of packets dropped on ingress to access port, for this MEP, due to same or lower MD level
         rcCfmStatsAggregateUplinkDrops 1.3.6.1.4.1.2272.1.69.8.1.18 counter64 read-only
The total number of packets dropped on ingress to uplink port, for all MEPS, due to lower MD level
 rcCfmTrap 1.3.6.1.4.1.2272.1.69.9
     rcCfmTrunkCcmIndication 1.3.6.1.4.1.2272.1.69.9.1 integer read-only
A Trunk CCM indication signifies that the trunk CCM operational status has changed state to UP or DOWN Enumeration: 'down': 2, 'up': 1.
     rcCfmServiceGroupCcmIndication 1.3.6.1.4.1.2272.1.69.9.2 integer read-only
A Service Group CCM indication signifies that the service group CCM operational status has changed state to UP or DOWN Enumeration: 'down': 2, 'up': 1.
     rcCfmEndPointCcmIndication 1.3.6.1.4.1.2272.1.69.9.3 integer read-only
A Endpoint CCM indication signifies that the endpoint CCM operational status has changed state to UP or DOWN Enumeration: 'down': 2, 'up': 1.
     rcCfmTrunkGroupIndication 1.3.6.1.4.1.2272.1.69.9.4 integer read-only
A Trunk group CCM indication signifies what kind of protection failure within the trunk group Enumeration: 'primaryFailed': 2, 'reversion': 5, 'manualSwitched': 4, 'secondaryFailed': 3, 'majorFailure': 1.
     rcCfmTrunkGroupProtected 1.3.6.1.4.1.2272.1.69.9.5 integer read-only
signifies trunk group was protected or was not protected Enumeration: 'wasprotected': 1, 'wasnotprotected': 2.
     rcCfmRemoteMepId 1.3.6.1.4.1.2272.1.69.9.6 integer32 read-only
Remote Maintenance Endpoint ID
     rcCfmLocalMepId 1.3.6.1.4.1.2272.1.69.9.7 integer32 read-only
Local Maintenance Endpoint ID
     rcCfmMepCcmIndication 1.3.6.1.4.1.2272.1.69.9.8 integer read-only
CCM indication signifies that the MEP CCM operational status Enumeration: 'down': 1, 'learned': 3, 'up': 2, 'update': 4.
     rcCfmCvid 1.3.6.1.4.1.2272.1.69.9.9 integer32 read-only
A value that uniquely identifies the Customer Vlan Id in i-sid endpt.
     rcCfmRemoteMacAddr 1.3.6.1.4.1.2272.1.69.9.10 macaddress read-only
remote MAC address
     rcCfmIsidId 1.3.6.1.4.1.2272.1.69.9.11 integer32 read-only
Service Instance ID of the I component
     rcCfmTrapTrunkName 1.3.6.1.4.1.2272.1.69.9.12 displaystring read-only
PBT Trunk Name
     rcCfmPbitNum 1.3.6.1.4.1.2272.1.69.9.13 integer32 read-only
p-bit value used to queue packets
     rcCfmUserLabel1 1.3.6.1.4.1.2272.1.69.9.14 displaystring read-only
Memo field
     rcCfmUserLabel2 1.3.6.1.4.1.2272.1.69.9.15 displaystring read-only
Memo field
     rcCfmMonitorCosPriority 1.3.6.1.4.1.2272.1.69.9.16 integer32 read-only
Monitor customer traffic on COS priority
     rcCfmThresholdIndication 1.3.6.1.4.1.2272.1.69.9.17 integer read-only
A threshold indication is: alarm - when the set-threshold has been exceeded clear - when the clear-threshold level has been reached after an alarm condition Enumeration: 'recovered': 2, 'exceeded': 1.
     rcCfmActualPercentage 1.3.6.1.4.1.2272.1.69.9.18 integer32 read-only
Measured Percentage in 1 percent increments
     rcCfmActualSubPercentage 1.3.6.1.4.1.2272.1.69.9.19 integer32 read-only
Measured Sub percentage in 1/100 percent increments
     rcCfmAlarmThreshold 1.3.6.1.4.1.2272.1.69.9.20 integer32 read-only
Configured alarm percentage threshold
     rcCfmAlarmSubThreshold 1.3.6.1.4.1.2272.1.69.9.21 integer32 read-only
Configured alarm sub percentage threshold
     rcCfmClearThreshold 1.3.6.1.4.1.2272.1.69.9.22 integer32 read-only
Configured clear percentage threshold
     rcCfmClearSubThreshold 1.3.6.1.4.1.2272.1.69.9.23 integer32 read-only
Configured clear sub percentage threshold
     rcCfmFdTarget 1.3.6.1.4.1.2272.1.69.9.24 counter32 read-only
frame delay target
     rcCfmFdAverage 1.3.6.1.4.1.2272.1.69.9.25 counter32 read-only
frame delay average
     rcCfmTime 1.3.6.1.4.1.2272.1.69.9.26 dateandtime read-only
The date and time stamp.
     rcCfmTrapTrunkGroupName 1.3.6.1.4.1.2272.1.69.9.27 displaystring read-only
trunk group name.
     rcCfmVid 1.3.6.1.4.1.2272.1.69.9.28 integer32 read-only
A value that uniquely identifies the Customer Vlan Id in i-sid endpt.
     rcCfmFdvTarget 1.3.6.1.4.1.2272.1.69.9.29 counter32 read-only
frame delay variation target
     rcCfmFdvAverage 1.3.6.1.4.1.2272.1.69.9.30 counter32 read-only
frame delay variation average
     rcCfmDirection 1.3.6.1.4.1.2272.1.69.9.31 integer read-only
MEP direction Enumeration: 'down': 2, 'up': 1.
     rcCfmDhuId 1.3.6.1.4.1.2272.1.69.9.32 integer32 read-only
A value that uniquely identifies the DH Uni Id in i-sid endpt.
     rcCfmIftlvIndication 1.3.6.1.4.1.2272.1.69.9.33 integer read-only
A Iftlv indication signifies that the operational status of CCM that is sent or received with iftlv has changed state to UP or DOWN Enumeration: 'down': 1, 'up': 2.
 rcCfmGlobals 1.3.6.1.4.1.2272.1.69.10
       rcCfmGlobalsEtherType 1.3.6.1.4.1.2272.1.69.10.1 integer32 read-write
CFM Ether Type
       rcCfmGlobalsPbtMac 1.3.6.1.4.1.2272.1.69.10.2 macaddress read-write
PBT base MAC address
       rcCfmGlobalsPortVid 1.3.6.1.4.1.2272.1.69.10.3 integer32 read-write
CFM default port vid, 4095 is used for untagged.
       rcCfmGlobalsPbtDropTrapTimer 1.3.6.1.4.1.2272.1.69.10.4 integer32 read-write
The timer settings for traps being sent on discard of packets with unknown destination MAC in minutes
       rcCfmGlobalsPmEnable 1.3.6.1.4.1.2272.1.69.10.5 enablevalue read-write
Performance monitor enable
       rcCfmGlobalsCcmTrapDisplayEnable 1.3.6.1.4.1.2272.1.69.10.6 enablevalue read-write
CCM trap display enable
       rcCfmGlobalsPmLogEnable 1.3.6.1.4.1.2272.1.69.10.7 enablevalue read-write
Enable PM Auto Logging
 rcCfmRemoteMepConfigTable 1.3.6.1.4.1.2272.1.69.11 no-access
Connectivity Fault Management Remote Maintenance Association table
       rcCfmRemoteMepConfigEntry 1.3.6.1.4.1.2272.1.69.11.1 no-access
Connectivity Fault Management Remote Maintenance EndPoint entry.
           rcCfmRemoteMepConfigDomainIndex 1.3.6.1.4.1.2272.1.69.11.1.1 integer32 no-access
Remote Maintenance Domain Name
           rcCfmRemoteMepConfigAssociationIndex 1.3.6.1.4.1.2272.1.69.11.1.2 integer32 no-access
Remote Maintenance Association Name
           rcCfmRemoteMepConfigId 1.3.6.1.4.1.2272.1.69.11.1.3 integer32 no-access
Remote Maintenance EndPoint ID
           rcCfmRemoteMepConfigDomainName 1.3.6.1.4.1.2272.1.69.11.1.4 displaystring read-only
Remote Maintenance Domain Name
           rcCfmRemoteMepConfigAssociationName 1.3.6.1.4.1.2272.1.69.11.1.5 displaystring read-only
Remote Maintenance Association Name
           rcCfmRemoteMepConfigMacAddr 1.3.6.1.4.1.2272.1.69.11.1.6 macaddress read-only
Mac address of remote maintenance endpoint
           rcCfmRemoteMepConfigRowStatus 1.3.6.1.4.1.2272.1.69.11.1.7 rowstatus read-only
Used to create/delete entries
 rcCfmRemoteMepStatsTable 1.3.6.1.4.1.2272.1.69.12 no-access
CFM Mep Learn stats table contains the local and remote mep Tx and Rx statistics
       rcCfmRemoteMepStatsEntry 1.3.6.1.4.1.2272.1.69.12.1 no-access
CFM Stats table entry. Contain CFM Message sending/receiving and missing counter. Entry indicate the CCM message still alive
           rcCfmRemoteMepStatsDomainIndex 1.3.6.1.4.1.2272.1.69.12.1.1 integer32 no-access
Maintenance Domain Name index
           rcCfmRemoteMepStatsAssociationIndex 1.3.6.1.4.1.2272.1.69.12.1.2 integer32 no-access
Maintenance Association Name index
           rcCfmRemoteMepStatsMepId 1.3.6.1.4.1.2272.1.69.12.1.3 integer32 no-access
Local MEP (Maintenance EndPoint) ID
           rcCfmRemoteMepStatsRemoteMepId 1.3.6.1.4.1.2272.1.69.12.1.4 integer32 no-access
Remote Mep Id which the local mep rx CCM message from
           rcCfmRemoteMepStatsDomainName 1.3.6.1.4.1.2272.1.69.12.1.5 displaystring read-only
Maintenance Domain Name
           rcCfmRemoteMepStatsAssociationName 1.3.6.1.4.1.2272.1.69.12.1.6 displaystring read-only
Maintenance Association Name
           rcCfmRemoteMepStatsLearnType 1.3.6.1.4.1.2272.1.69.12.1.7 integer read-only
Indicate the learning remote Mep is static created or dynamic learn Enumeration: 'dynamic': 2, 'static': 1.
           rcCfmRemoteMepStatsRemoteMacAddr 1.3.6.1.4.1.2272.1.69.12.1.8 macaddress read-only
A remote MAC address
           rcCfmRemoteMepStatsRxCnt 1.3.6.1.4.1.2272.1.69.12.1.9 counter64 read-only
The total Number of CFM messages are received by trunk or ESM port
           rcCfmRemoteMepStatsSeqErrCnt 1.3.6.1.4.1.2272.1.69.12.1.10 counter64 read-only
The total Number of Sequence errors
           rcCfmRemoteMepStatsOperState 1.3.6.1.4.1.2272.1.69.12.1.11 integer read-only
To indicate the operational state of remote maintenance endpoint Enumeration: 'down': 3, 'start': 1, 'up': 2.
           rcCfmRemoteMepStatsClearStats 1.3.6.1.4.1.2272.1.69.12.1.12 truthvalue read-write
To clear the CCM messages counter
           rcCfmRemoteMepStatsDbRdi 1.3.6.1.4.1.2272.1.69.12.1.13 truthvalue read-only
State of the RDI bit in the last received CCM (true for RDI=1), or false if none has been received.
           rcCfmRemoteMepStatsIfTlvRx 1.3.6.1.4.1.2272.1.69.12.1.14 integer read-only
To indicate the operational state of Interface Status TLV received on MaintenanceEndpoint. This status indicates that the state of the remote UNI Port Enumeration: 'dormant': 7, 'none': 1, 'lowerLayerDown': 4, 'unknown': 6, 'testing': 5, 'up': 2, 'down': 3, 'notpresent': 8.
 rcCfmMaintenanceIntermediatePointTable 1.3.6.1.4.1.2272.1.69.13 no-access
Connectivity Fault Management Maintenance Intermediate Point table
       rcCfmMaintenanceIntermediatePointEntry 1.3.6.1.4.1.2272.1.69.13.1 no-access
Connectivity Fault Management Maintenance Intermediate Point entry.
           rcCfmMaintenanceIntermediatePointDomainIndex 1.3.6.1.4.1.2272.1.69.13.1.1 integer32 no-access
Maintenance Domain Name
           rcCfmMaintenanceIntermediatePointId 1.3.6.1.4.1.2272.1.69.13.1.2 integer32 no-access
Maintenance IntermediatePoint ID
           rcCfmMaintenanceIntermediatePointDomainName 1.3.6.1.4.1.2272.1.69.13.1.3 displaystring read-only
Maintenance Domain Name
           rcCfmMaintenanceIntermediatePointRowStatus 1.3.6.1.4.1.2272.1.69.13.1.4 rowstatus read-only
Used to create/delete entries
           rcCfmMaintenanceIntermediatePointMipType 1.3.6.1.4.1.2272.1.69.13.1.5 integer read-only
Mip Type Enumeration: 'unused': 2, 'vlan': 1, 'endptClient': 4.
           rcCfmMaintenanceIntermediatePointClearStats 1.3.6.1.4.1.2272.1.69.13.1.6 truthvalue read-only
To clear the MIP CCM sending/receiving message counter
           rcCfmMaintenanceIntermediatePointServiceDescription 1.3.6.1.4.1.2272.1.69.13.1.7 displaystring read-only
Used to specify what service this mip assigned to
 rcCfmNniTable 1.3.6.1.4.1.2272.1.69.14 no-access
CFM NNI table
       rcCfmNniEntry 1.3.6.1.4.1.2272.1.69.14.1 no-access
CFM NNI table entry
           rcCfmNniPort 1.3.6.1.4.1.2272.1.69.14.1.1 interfaceindex no-access
PBT Trunk Port
           rcCfmNniServiceId 1.3.6.1.4.1.2272.1.69.14.1.2 integer32 no-access
TDI or MIM
           rcCfmNniPwIndex 1.3.6.1.4.1.2272.1.69.14.1.3 integer32 no-access
PW index
           rcCfmNniTlsIndex 1.3.6.1.4.1.2272.1.69.14.1.4 integer32 no-access
Access Port
           rcCfmNniTgName 1.3.6.1.4.1.2272.1.69.14.1.5 displaystring read-only
PBT Trunk Group Name
 rcCfmNniStatsTable 1.3.6.1.4.1.2272.1.69.15 no-access
CFM NNI stats table
       rcCfmNniStatsEntry 1.3.6.1.4.1.2272.1.69.15.1 no-access
CFM NNI Stats table entry. Contain bytes processed and dropped due to lookup failure in the SDT table
           rcCfmNniStatsPort 1.3.6.1.4.1.2272.1.69.15.1.1 interfaceindex no-access
PBT Trunk Port
           rcCfmNniStatsOel2RxOctets 1.3.6.1.4.1.2272.1.69.15.1.2 counter64 read-only
The total Number of bytes (OEL2 encapsulation) processed on ingress NNI port
           rcCfmNniStatsOel2RxDroppedOctets 1.3.6.1.4.1.2272.1.69.15.1.3 counter64 read-only
The total Number of bytes (OEL2 encapsulation) dropped on ingress NNI port
           rcCfmNniStatsMimRxOctets 1.3.6.1.4.1.2272.1.69.15.1.4 counter64 read-only
The total Number of bytes (MIM encapsulation) processed on ingress NNI port
           rcCfmNniStatsMimRxDroppedOctets 1.3.6.1.4.1.2272.1.69.15.1.5 counter64 read-only
The total Number of bytes (MIM encapsulation) dropped on ingress NNI port
           rcCfmNniStatsPweRxOctets 1.3.6.1.4.1.2272.1.69.15.1.6 counter64 read-only
The total Number of bytes (PWE encapsulation) processed on ingress NNI port
           rcCfmNniStatsPweRxDroppedOctets 1.3.6.1.4.1.2272.1.69.15.1.7 counter64 read-only
The total Number of bytes (PWE encapsulation) dropped on ingress NNI port
 rcCfmMipStatsTable 1.3.6.1.4.1.2272.1.69.16 no-access
CFM Mip stats table
       rcCfmMipStatsEntry 1.3.6.1.4.1.2272.1.69.16.1 no-access
CFM Mip Stats table entry. Contain CFM Mip message number of receiving/replying loopback & linktrace.
           rcCfmMipStatsDomainIndex 1.3.6.1.4.1.2272.1.69.16.1.1 integer32 no-access
Maintenance Domain Name
           rcCfmMipStatsDomainName 1.3.6.1.4.1.2272.1.69.16.1.2 displaystring read-only
Maintenance Domain Name
           rcCfmMipStatsMipId 1.3.6.1.4.1.2272.1.69.16.1.3 integer32 no-access
Maintenance Intermediate Point ID
           rcCfmMipStatsLoopbackReceived 1.3.6.1.4.1.2272.1.69.16.1.4 counter64 read-only
The total Number of CFM loopback messages received.
           rcCfmMipStatsLoopbackReplied 1.3.6.1.4.1.2272.1.69.16.1.5 counter64 read-only
The total Number of CFM loopback messages replied.
           rcCfmMipStatsLinktraceReceived 1.3.6.1.4.1.2272.1.69.16.1.6 counter64 read-only
The total Number of CFM linktrace messages received.
           rcCfmMipStatsLinktraceReplied 1.3.6.1.4.1.2272.1.69.16.1.7 counter64 read-only
The total Number of CFM linktrace messages replied.
 rcCfmTransmitLbmTable 1.3.6.1.4.1.2272.1.69.17 no-access
Connectivity Fault Management transmit LBM table
       rcCfmTransmitLbmEntry 1.3.6.1.4.1.2272.1.69.17.1 no-access
Connectivity Fault Management Maintenance EndPoint LBM entry.
           rcCfmTransmitLbmDomainIndex 1.3.6.1.4.1.2272.1.69.17.1.1 integer32 no-access
Maintenance Domain Name
           rcCfmTransmitLbmAssociationIndex 1.3.6.1.4.1.2272.1.69.17.1.2 integer32 no-access
Maintenance Association Name
           rcCfmTransmitLbmIndex 1.3.6.1.4.1.2272.1.69.17.1.3 integer32 no-access
Maintenance EndPoint Index
           rcCfmTransmitLbmDomainName 1.3.6.1.4.1.2272.1.69.17.1.4 displaystring read-only
Maintenance Domain Name
           rcCfmTransmitLbmAssociationName 1.3.6.1.4.1.2272.1.69.17.1.5 displaystring read-only
Maintenance Association Name
           rcCfmTransmitLbmDestMacAddress 1.3.6.1.4.1.2272.1.69.17.1.6 macaddress read-write
An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address.
           rcCfmTransmitLbmDestMepId 1.3.6.1.4.1.2272.1.69.17.1.7 integer32 read-write
An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenance Association
           rcCfmTransmitLbmDestIsMepId 1.3.6.1.4.1.2272.1.69.17.1.8 truthvalue read-write
True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission.
           rcCfmTransmitLbmMessages 1.3.6.1.4.1.2272.1.69.17.1.9 integer32 read-write
The number of loopback messages to be transmitted.
           rcCfmTransmitLbmVlanPriority 1.3.6.1.4.1.2272.1.69.17.1.11 integer32 read-write
Priority. 3 bit value to be used in the VLAN tsg, if present in the transmitted frame.
           rcCfmTransmitLbmVlanDropEnable 1.3.6.1.4.1.2272.1.69.17.1.12 truthvalue read-write
Drop Enable bit value to be used in the VLAN tag, if present in the transmitted frame.
           rcCfmTransmitLbmSeqNumber 1.3.6.1.4.1.2272.1.69.17.1.13 integer32 read-only
The transaction identifier/sequence number of the first loopback message (to be) sent.
           rcCfmTransmitLbmResultOk 1.3.6.1.4.1.2272.1.69.17.1.14 truthvalue read-only
Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent.
           rcCfmTransmitLbmStatus 1.3.6.1.4.1.2272.1.69.17.1.15 integer read-write
Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages. -abort The service is aborted or about to abort the Loopback messages. This column will also be used to avoid concurrency or race condition problems that could occur if two or more management entities try to use the service at the sane time. Enumeration: 'ready': 1, 'transmit': 2, 'abort': 3.
           rcCfmTransmitLbmResult 1.3.6.1.4.1.2272.1.69.17.1.16 displaystring read-only
Display the LBM result.
           rcCfmTransmitLbmMode 1.3.6.1.4.1.2272.1.69.17.1.17 integer read-write
Modes of the transmit loopback service: throughput: The throughput mode of operation. LBM Frame will be sent out at the configured transmit interval rate for the burst-count number. roundTripTime: The RoundTripTime mode of operation. LBM Frame will be sent out one at a time and the transmit time will be recorded locally. Enumeration: 'roundTripTime': 2, 'throughput': 1.
           rcCfmTransmitLbmTimeoutInt 1.3.6.1.4.1.2272.1.69.17.1.18 integer32 read-write
The interval to wait for an LBM time-out with a range of (1..10) seconds with a default value of 3 seconds.
           rcCfmTransmitLbmInterFrameInt 1.3.6.1.4.1.2272.1.69.17.1.19 integer32 read-write
The interval between LBM frames with a range of (0..1000) msecs with a default value of 500 msecs. The value of 0 msecs indicates to send the frames as fast as possible.
           rcCfmTransmitLbmTestPattern 1.3.6.1.4.1.2272.1.69.17.1.20 integer read-write
The test pattern to use in the LBM PDU with range of values namely allZero, allZeroCrc, pseudoRandomBitSequence and pseudoRandomBitSequenceCrc and with a default value of allZero. value meaning -------- ------- allZero(0) Null signal without CRC-32 allZeroCrc(1) Null signal with CRC-32 pseudoRandomBitSequence(2) PRBS 1/2^31-1 without CRC-32 pseudoRandomBitSequenceCrc(3) PBRS 1/2^31-1 with CRC-32 Enumeration: 'allZero': 0, 'allZeroCrc': 1, 'pseudoRandomBitSequence': 2, 'pseudoRandomBitSequenceCrc': 3.
           rcCfmTransmitLbmDataSize 1.3.6.1.4.1.2272.1.69.17.1.21 integer32 read-write
An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent.
           rcCfmTransmitLbmFrameSize 1.3.6.1.4.1.2272.1.69.17.1.22 integer32 read-write
If the frame size (64-500 for R-Mod and 64-9600 for RC-Mod)is specified then the data size shall be internally calculated and the calculated data size shall be included in the data TLV.
 rcCfmTransmitLtmTable 1.3.6.1.4.1.2272.1.69.18 no-access
Connectivity Fault Management transmit LBM table
       rcCfmTransmitLtmEntry 1.3.6.1.4.1.2272.1.69.18.1 no-access
Connectivity Fault Management Maintenance EndPoint LTM entry.
           rcCfmTransmitLtmDomainIndex 1.3.6.1.4.1.2272.1.69.18.1.1 integer32 no-access
Maintenance Domain Name
           rcCfmTransmitLtmAssociationIndex 1.3.6.1.4.1.2272.1.69.18.1.2 integer32 no-access
Maintenance Association Name
           rcCfmTransmitLtmIndex 1.3.6.1.4.1.2272.1.69.18.1.3 integer32 no-access
Maintenance EndPoint Index
           rcCfmTransmitLtmDomainName 1.3.6.1.4.1.2272.1.69.18.1.4 displaystring read-only
Maintenance Domain Name
           rcCfmTransmitLtmAssociationName 1.3.6.1.4.1.2272.1.69.18.1.5 displaystring read-only
Maintenance Association Name
           rcCfmTransmitLtmVlanPriority 1.3.6.1.4.1.2272.1.69.18.1.6 integer32 read-write
Priority. 3 bit value to be used in the VLAN tag, if present in the transmitted frame.
           rcCfmTransmitLtmDestMacAddress 1.3.6.1.4.1.2272.1.69.18.1.7 macaddress read-write
An indication of the target MAC Address Field to be transmitted, either: A unicast destination MAC address.
           rcCfmTransmitLtmDestMepId 1.3.6.1.4.1.2272.1.69.18.1.8 integer32 read-write
An indication of the target MAC Address Field to be transmitted, either: The Maintenance Assiciation End Point identifier of another MEP in the same Maintenance Association
           rcCfmTransmitLtmDestIsMepId 1.3.6.1.4.1.2272.1.69.18.1.9 truthvalue read-write
True indicates that MepId of the target MEP is used for Loopback transmission. False indicates that unicast destination MAC address of the target MEP is used for Loopback transmission.
           rcCfmTransmitLtmTtl 1.3.6.1.4.1.2272.1.69.18.1.10 integer32 read-write
The number of hops remaining to this LTM. Decremented by 1 by each Bridge that handles the LTM. The decremented value is returned in the LTR. If 0 on output, the LTM is not transmitted to the next hop. The value of the TTL Field in the LTM transmitted by the originating MEP is controlled by a Managed Object; The default value if none is specified is 64.
           rcCfmTransmitLtmSeqNumber 1.3.6.1.4.1.2272.1.69.18.1.11 integer32 read-only
The transaction identifier/sequence number of the first loopback message (to be) sent.
           rcCfmTransmitLtmResultOk 1.3.6.1.4.1.2272.1.69.18.1.12 truthvalue read-only
Indicates the result of the operation: -true. The Loopback Message(s) will be (or have been) sent. -false. The Loopback Message(s) will not be sent.
           rcCfmTransmitLtmStatus 1.3.6.1.4.1.2272.1.69.18.1.13 integer read-write
Status of the transmit loopback service: -ready. The service is available. -transmit. The service is transmitting, or about to transmit, the Loopback messages. -abort. The service is aborted, or about to abort the LTM message This column will also be used to avoid concurrency or race condition problems that could occur if two or more management entities try to use the service at the sane time. Enumeration: 'ready': 1, 'transmit': 2, 'abort': 3.
           rcCfmTransmitLtmResult 1.3.6.1.4.1.2272.1.69.18.1.14 displaystring read-only
Display the LTM result.
           rcCfmTransmitLtmFlag 1.3.6.1.4.1.2272.1.69.18.1.15 integer read-only
LTM result flag indicating LTM status or error code. Each enum value represents a status or error case. 1 - No error 2 - Ltm Internal Error 3 - Unknown Remote Maintenance End Point 4 - Invalid Remote Maintenance End Point Mac Address 5 - Unset Remote Maintenance End Point Mac Address 6 - Mep must be enabled in order to perform LTM 7 - No Ltr response received 8 - Linktrace to own Mep MAC is not sent 9 - Endpoint must be enabled in order to perform LTM 10 - Pbt-trunk must be enabled in order to perform LTM 11 - LTM completed Enumeration: 'none': 1, 'ltmComplete': 11, 'internalError': 2, 'trunkDisabled': 10, 'noRemoteMep': 3, 'mepDisabled': 6, 'invalidRemoteMepMac': 4, 'noRemoteMepMacLearned': 5, 'noLtrResponse': 7, 'epDisabled': 9, 'ltmToOwnMepMac': 8.
 rcCfmPbtTrunkStatsTable 1.3.6.1.4.1.2272.1.69.19 no-access
Table of PBT trunk statistics.
       rcCfmPbtTrunkStatsEntry 1.3.6.1.4.1.2272.1.69.19.1 no-access
A PBT Trunk Statistics table entry.
           rcCfmPbtTrunkStatsName 1.3.6.1.4.1.2272.1.69.19.1.1 cfmnamestring no-access
PBT Trunk Name.
           rcCfmPbtTrunkStatsPort 1.3.6.1.4.1.2272.1.69.19.1.2 interfaceindex read-only
PBT Trunk Port
           rcCfmPbtTrunkStatsDA 1.3.6.1.4.1.2272.1.69.19.1.3 macaddress read-only
Trunk Mac (remote CP mac)
           rcCfmPbtTrunkStatsVlanId 1.3.6.1.4.1.2272.1.69.19.1.4 integer32 read-only
PBT trunk VLAN ID
           rcCfmPbtTrunkStatsRevVlanId 1.3.6.1.4.1.2272.1.69.19.1.5 integer32 read-only
PBT trunk reverse VLAN ID
           rcCfmPbtTrunkStatsSA 1.3.6.1.4.1.2272.1.69.19.1.6 macaddress read-only
Trunk Source Mac (local switch PBT mac)
           rcCfmPbtTrunkStatsRxOctets 1.3.6.1.4.1.2272.1.69.19.1.7 counter64 read-only
Number of Octets received by the trunk.This does not include trunk CCM messag (control) packets.
           rcCfmPbtTrunkStatsRxFrames 1.3.6.1.4.1.2272.1.69.19.1.8 counter64 read-only
Number of Packets received by the trunk.This does not include trunk CCM messag (control) packets.
           rcCfmPbtTrunkStatsTxOctets 1.3.6.1.4.1.2272.1.69.19.1.9 counter64 read-only
Number of Octets transmitted by the trunk.This does not include trunk CCM messag (control) packets.
           rcCfmPbtTrunkStatsTxFrames 1.3.6.1.4.1.2272.1.69.19.1.10 counter64 read-only
Number of Packets transmitted by the trunk.This does not include trunk CCM messag (control) packets.
           rcCfmPbtTrunkStatsRxPbit0Octets 1.3.6.1.4.1.2272.1.69.19.1.11 counter64 read-only
Number of Pbit 0 Octets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit0Frames 1.3.6.1.4.1.2272.1.69.19.1.12 counter64 read-only
Number of P-Bit 0 Packets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit1Octets 1.3.6.1.4.1.2272.1.69.19.1.13 counter64 read-only
Number of Pbit 1 Octets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit1Frames 1.3.6.1.4.1.2272.1.69.19.1.14 counter64 read-only
Number of P-Bit 1 Packets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit2Octets 1.3.6.1.4.1.2272.1.69.19.1.15 counter64 read-only
Number of Pbit 2 Octets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit2Frames 1.3.6.1.4.1.2272.1.69.19.1.16 counter64 read-only
Number of P-Bit 2 Packets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit3Octets 1.3.6.1.4.1.2272.1.69.19.1.17 counter64 read-only
Number of Pbit 3 Octets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit3Frames 1.3.6.1.4.1.2272.1.69.19.1.18 counter64 read-only
Number of P-Bit 3 Packets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit4Octets 1.3.6.1.4.1.2272.1.69.19.1.19 counter64 read-only
Number of Pbit 4 Octets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit4Frames 1.3.6.1.4.1.2272.1.69.19.1.20 counter64 read-only
Number of P-Bit 4 Packets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit5Octets 1.3.6.1.4.1.2272.1.69.19.1.21 counter64 read-only
Number of Pbit 5 Octets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit5Frames 1.3.6.1.4.1.2272.1.69.19.1.22 counter64 read-only
Number of P-Bit 5 Packets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit6Octets 1.3.6.1.4.1.2272.1.69.19.1.23 counter64 read-only
Number of Pbit64 Octets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit6Frames 1.3.6.1.4.1.2272.1.69.19.1.24 counter64 read-only
Number of P-Bit 6 Packets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit7Octets 1.3.6.1.4.1.2272.1.69.19.1.25 counter64 read-only
Number of Pbit64 Octets received by the trunk.
           rcCfmPbtTrunkStatsRxPbit7Frames 1.3.6.1.4.1.2272.1.69.19.1.26 counter64 read-only
Number of P-Bit 6 Packets received by the trunk.
           rcCfmPbtTrunkStatsTxPbit0Octets 1.3.6.1.4.1.2272.1.69.19.1.27 counter64 read-only
Number of Pbit 0 Octets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit0Frames 1.3.6.1.4.1.2272.1.69.19.1.28 counter64 read-only
Number of P-Bit 0 Packets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit1Octets 1.3.6.1.4.1.2272.1.69.19.1.29 counter64 read-only
Number of Pbit 1 Octets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit1Frames 1.3.6.1.4.1.2272.1.69.19.1.30 counter64 read-only
Number of P-Bit 1 Packets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit2Octets 1.3.6.1.4.1.2272.1.69.19.1.31 counter64 read-only
Number of Pbit 2 Octets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit2Frames 1.3.6.1.4.1.2272.1.69.19.1.32 counter64 read-only
Number of P-Bit 2 Packets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit3Octets 1.3.6.1.4.1.2272.1.69.19.1.33 counter64 read-only
Number of Pbit 3 Octets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit3Frames 1.3.6.1.4.1.2272.1.69.19.1.34 counter64 read-only
Number of P-Bit 3 Packets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit4Octets 1.3.6.1.4.1.2272.1.69.19.1.35 counter64 read-only
Number of Pbit 4 Octets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit4Frames 1.3.6.1.4.1.2272.1.69.19.1.36 counter64 read-only
Number of P-Bit 4 Packets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit5Octets 1.3.6.1.4.1.2272.1.69.19.1.37 counter64 read-only
Number of Pbit 5 Octets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit5Frames 1.3.6.1.4.1.2272.1.69.19.1.38 counter64 read-only
Number of P-Bit 5 Packets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit6Octets 1.3.6.1.4.1.2272.1.69.19.1.39 counter64 read-only
Number of Pbit64 Octets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit6Frames 1.3.6.1.4.1.2272.1.69.19.1.40 counter64 read-only
Number of P-Bit 6 Packets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit7Octets 1.3.6.1.4.1.2272.1.69.19.1.41 counter64 read-only
Number of Pbit64 Octets transmitted by the trunk.
           rcCfmPbtTrunkStatsTxPbit7Frames 1.3.6.1.4.1.2272.1.69.19.1.42 counter64 read-only
Number of P-Bit 6 Packets transmitted by the trunk.
 rcCfmPortStatsTable 1.3.6.1.4.1.2272.1.69.20 no-access
CFM Port stats table contains the port Tx and Rx CFM statistics
       rcCfmPortStatsEntry 1.3.6.1.4.1.2272.1.69.20.1 no-access
CFM Port Stats table entry. Contain port's CFM Message sending/receiving counter.
           rcCfmPortStatsIndex 1.3.6.1.4.1.2272.1.69.20.1.1 interfaceindex no-access
Slot/Port index
           rcCfmPortStatsTxCnt 1.3.6.1.4.1.2272.1.69.20.1.2 counter64 read-only
The total Number of CFM messages that are sent by port
           rcCfmPortStatsRxCnt 1.3.6.1.4.1.2272.1.69.20.1.3 counter64 read-only
The total Number of CFM messages are received by port
 rcCfmFlrTable 1.3.6.1.4.1.2272.1.69.21 no-access
Frame Loss Ratio Profile table
       rcCfmFlrEntry 1.3.6.1.4.1.2272.1.69.21.1 no-access
Frame Loss Ratio entry.
           rcCfmFlrIndex 1.3.6.1.4.1.2272.1.69.21.1.1 integer32 no-access
Frame-Loss-Ratio profile index
           rcCfmFlrProfileName 1.3.6.1.4.1.2272.1.69.21.1.2 displaystring read-only
Frame-Loss-Ratio Profile Name
           rcCfmFlrRowStatus 1.3.6.1.4.1.2272.1.69.21.1.3 rowstatus read-only
Used to create/delete entries
           rcCfmFlrPriority 1.3.6.1.4.1.2272.1.69.21.1.4 integer32 read-only
Frame Loss Ratio messaging runs on COS priority
           rcCfmFlrAlarmThresholdPercent 1.3.6.1.4.1.2272.1.69.21.1.5 integer32 read-only
FLR set alarm threshold percentage
           rcCfmFlrAlarmThresholdSubPercent 1.3.6.1.4.1.2272.1.69.21.1.6 integer32 read-only
FLR set alarm threshold percentage in 1/100 percent increments
           rcCfmFlrClearThresholdPercent 1.3.6.1.4.1.2272.1.69.21.1.7 integer32 read-only
FLR clear alarm threshold percentage
           rcCfmFlrClearThresholdSubPercent 1.3.6.1.4.1.2272.1.69.21.1.8 integer32 read-only
FLR clear alarm threshold percentage in 1/100 percent increments
           rcCfmFlrThresholdState 1.3.6.1.4.1.2272.1.69.21.1.9 enablevalue read-only
FLR threshold State
           rcCfmFlrNumberOfRefs 1.3.6.1.4.1.2272.1.69.21.1.10 gauge32 read-only
Number of PMs that reference this flr-profile
 rcCfmFdTable 1.3.6.1.4.1.2272.1.69.22 no-access
CFM Frame Delay and Frame Delay Variation Profile table
       rcCfmFdEntry 1.3.6.1.4.1.2272.1.69.22.1 no-access
Frame Delay and Frame Delay Variation entry.
           rcCfmFdIndex 1.3.6.1.4.1.2272.1.69.22.1.1 integer32 no-access
Frame-Delay profile index
           rcCfmFdProfileName 1.3.6.1.4.1.2272.1.69.22.1.2 displaystring read-only
Frame-Delay Profile Name
           rcCfmFdRowStatus 1.3.6.1.4.1.2272.1.69.22.1.3 rowstatus read-only
Used to create/delete entries
           rcCfmFdPriority 1.3.6.1.4.1.2272.1.69.22.1.4 integer32 read-only
Frame Delay messaging runs on COS priority
           rcCfmFdPerformanceTarget 1.3.6.1.4.1.2272.1.69.22.1.5 integer32 read-only
Frame delay performance objective in microseconds
           rcCfmFdAlarmThresholdPercent 1.3.6.1.4.1.2272.1.69.22.1.6 integer32 read-only
FD set alarm threshold percentage
           rcCfmFdAlarmThresholdSubPercent 1.3.6.1.4.1.2272.1.69.22.1.7 integer32 read-only
FD set alarm threshold percentage in 1/100 percent incr ements
           rcCfmFdClearThresholdPercent 1.3.6.1.4.1.2272.1.69.22.1.8 integer32 read-only
FD clear alarm threshold percentage
           rcCfmFdClearThresholdSubPercent 1.3.6.1.4.1.2272.1.69.22.1.9 integer32 read-only
FD clear alarm threshold percentage in 1/100 percent in crements
           rcCfmFdFdvPerformanceTarget 1.3.6.1.4.1.2272.1.69.22.1.10 integer32 read-only
Frame delay variation performance objective in microseconds
           rcCfmFdFdvAlarmThresholdPercent 1.3.6.1.4.1.2272.1.69.22.1.11 integer32 read-only
FDV set alarm threshold percentage
           rcCfmFdFdvAlarmThresholdSubPercent 1.3.6.1.4.1.2272.1.69.22.1.12 integer32 read-only
FDV set alarm threshold percentage in 1/100 percent inc rements
           rcCfmFdFdvClearThresholdPercent 1.3.6.1.4.1.2272.1.69.22.1.13 integer32 read-only
FDV clear alarm threshold percentage
           rcCfmFdFdvClearThresholdSubPercent 1.3.6.1.4.1.2272.1.69.22.1.14 integer32 read-only
FDV clear alarm threshold percentage in 1/100 percent i ncrements
           rcCfmFdThresholdState 1.3.6.1.4.1.2272.1.69.22.1.15 enablevalue read-only
FD / FDV threshold State
           rcCfmFdNumberOfRefs 1.3.6.1.4.1.2272.1.69.22.1.16 gauge32 read-only
Number of PM's that referencen this fd-profile
 rcCfmFlrStatsInfoTable 1.3.6.1.4.1.2272.1.69.23 no-access
CFM Frame Loss Ratio Stats Info
       rcCfmFlrStatsInfoEntry 1.3.6.1.4.1.2272.1.69.23.1 no-access
Frame Loss Ratio Stats Info entry.
           rcCfmFlrStatsInfoMdIndex 1.3.6.1.4.1.2272.1.69.23.1.1 integer32 no-access
Maintenance Domain Name
           rcCfmFlrStatsInfoMaIndex 1.3.6.1.4.1.2272.1.69.23.1.2 integer32 no-access
Maintenance Association Name
           rcCfmFlrStatsInfoMepId 1.3.6.1.4.1.2272.1.69.23.1.3 integer32 no-access
Maintenance EndPoint ID
           rcCfmFlrStatsInfoRmepId 1.3.6.1.4.1.2272.1.69.23.1.4 integer32 no-access
Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId
           rcCfmFlrStatsInfoPriorityIndex 1.3.6.1.4.1.2272.1.69.23.1.5 integer32 no-access
priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0
           rcCfmFlrStatsInfoMdName 1.3.6.1.4.1.2272.1.69.23.1.6 displaystring read-only
Maintenance Domain Name
           rcCfmFlrStatsInfoMaName 1.3.6.1.4.1.2272.1.69.23.1.7 displaystring read-only
Maintenance Association Name
           rcCfmFlrStatsInfoPriority 1.3.6.1.4.1.2272.1.69.23.1.8 integer32 read-only
Frame Loss Ratio messaging runs on COS priority
           rcCfmFlrStatsInfoNearEndPercent 1.3.6.1.4.1.2272.1.69.23.1.9 integer32 read-only
Measured near-end FLR percentage
           rcCfmFlrStatsInfoNearEndSubPercent 1.3.6.1.4.1.2272.1.69.23.1.10 integer32 read-only
Measured near-end FLR sub percentage
           rcCfmFlrStatsInfoFarEndPercent 1.3.6.1.4.1.2272.1.69.23.1.11 integer32 read-only
Measured far-end FLR percentage
           rcCfmFlrStatsInfoFarEndSubPercent 1.3.6.1.4.1.2272.1.69.23.1.12 integer32 read-only
Measured far-end FLR sub percentage
           rcCfmFlrStatsInfoPmOperState 1.3.6.1.4.1.2272.1.69.23.1.13 rccfmpmoperstate read-only
The operational state of the PM.
 rcCfmFlrStatsCurrTable 1.3.6.1.4.1.2272.1.69.24 no-access
CFM Frame Loss Ratio Stats Current
       rcCfmFlrStatsCurrEntry 1.3.6.1.4.1.2272.1.69.24.1 no-access
CFM Frame Loss Ratio Stats Current entry.
           rcCfmFlrStatsCurrMdIndex 1.3.6.1.4.1.2272.1.69.24.1.1 integer32 no-access
Maintenance Domain Name
           rcCfmFlrStatsCurrMaIndex 1.3.6.1.4.1.2272.1.69.24.1.2 integer32 no-access
Maintenance Association Name
           rcCfmFlrStatsCurrMepId 1.3.6.1.4.1.2272.1.69.24.1.3 integer32 no-access
Maintenance EndPoint ID
           rcCfmFlrStatsCurrRmepId 1.3.6.1.4.1.2272.1.69.24.1.4 integer32 no-access
Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId
           rcCfmFlrStatsCurrPriorityIndex 1.3.6.1.4.1.2272.1.69.24.1.5 integer32 no-access
priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0
           rcCfmFlrStatsCurrMdName 1.3.6.1.4.1.2272.1.69.24.1.6 displaystring read-only
Maintenance Domain Name
           rcCfmFlrStatsCurrMaName 1.3.6.1.4.1.2272.1.69.24.1.7 displaystring read-only
Maintenance Association Name
           rcCfmFlrStatsCurrPriority 1.3.6.1.4.1.2272.1.69.24.1.8 integer32 read-only
Frame Loss Ratio messaging runs on COS priority
           rcCfmFlrStatsCurrPmOperState 1.3.6.1.4.1.2272.1.69.24.1.9 rccfmpmoperstate read-only
The operational state of the PM.
           rcCfmFlrStatsCurrStartTime 1.3.6.1.4.1.2272.1.69.24.1.10 octet string read-only
The date and time stamp.
           rcCfmFlrStatsCurrEndTime 1.3.6.1.4.1.2272.1.69.24.1.11 octet string read-only
The date and time stamp.
           rcCfmFlrStatsCurrHistInterval 1.3.6.1.4.1.2272.1.69.24.1.12 gauge32 read-only
History Interval
           rcCfmFlrStatsCurrSampleRate 1.3.6.1.4.1.2272.1.69.24.1.13 gauge32 read-only
Sample rate in seconds
           rcCfmFlrStatsCurrNearEndPercent 1.3.6.1.4.1.2272.1.69.24.1.14 integer32 read-only
Measured near-end FLR percentage
           rcCfmFlrStatsCurrNearEndSubPercent 1.3.6.1.4.1.2272.1.69.24.1.15 integer32 read-only
Measured near-end FLR sub percentage
           rcCfmFlrStatsCurrFarEndPercent 1.3.6.1.4.1.2272.1.69.24.1.16 integer32 read-only
Measured far-end FLR percentage
           rcCfmFlrStatsCurrFarEndSubPercent 1.3.6.1.4.1.2272.1.69.24.1.17 integer32 read-only
Measured far-end FLR sub percentage
           rcCfmFlrStatsCurrMinNearEndPercent 1.3.6.1.4.1.2272.1.69.24.1.18 integer32 read-only
Measured near-end FLR percentage
           rcCfmFlrStatsCurrMinNearEndSubPercent 1.3.6.1.4.1.2272.1.69.24.1.19 integer32 read-only
Measured near-end FLR sub percentage
           rcCfmFlrStatsCurrMinFarEndPercent 1.3.6.1.4.1.2272.1.69.24.1.20 integer32 read-only
Measured near-end FLR percentage
           rcCfmFlrStatsCurrMinFarEndSubPercent 1.3.6.1.4.1.2272.1.69.24.1.21 integer32 read-only
Measured near-end FLR sub percentage
           rcCfmFlrStatsCurrMaxNearEndPercent 1.3.6.1.4.1.2272.1.69.24.1.22 integer32 read-only
Measured near-end FLR percentage
           rcCfmFlrStatsCurrMaxNearEndSubPercent 1.3.6.1.4.1.2272.1.69.24.1.23 integer32 read-only
Measured near-end FLR sub percentage
           rcCfmFlrStatsCurrMaxFarEndPercent 1.3.6.1.4.1.2272.1.69.24.1.24 integer32 read-only
Measured near-end FLR percentage
           rcCfmFlrStatsCurrMaxFarEndSubPercent 1.3.6.1.4.1.2272.1.69.24.1.25 integer32 read-only
Measured near-end FLR sub percentage
           rcCfmFlrStatsCurrTxFrames 1.3.6.1.4.1.2272.1.69.24.1.26 counter64 read-only
Tx frames
           rcCfmFlrStatsCurrRxFrames 1.3.6.1.4.1.2272.1.69.24.1.27 counter64 read-only
Rx frames
           rcCfmFlrStatsCurrFlFrames 1.3.6.1.4.1.2272.1.69.24.1.28 counter64 read-only
Frame Loss frames
           rcCfmFlrStatsCurrTxFarEndFrames 1.3.6.1.4.1.2272.1.69.24.1.29 counter64 read-only
Far-end Tx frames
           rcCfmFlrStatsCurrRxFarEndFrames 1.3.6.1.4.1.2272.1.69.24.1.30 counter64 read-only
Far-end Rx frames
           rcCfmFlrStatsCurrFlFarEndFrames 1.3.6.1.4.1.2272.1.69.24.1.31 counter64 read-only
Far-end Frame Loss frames
           rcCfmFlrStatsCurrSamplesPerInterval 1.3.6.1.4.1.2272.1.69.24.1.32 gauge32 read-only
Samples per interval
           rcCfmFlrStatsCurrSamplesTransmitted 1.3.6.1.4.1.2272.1.69.24.1.33 gauge32 read-only
Samples transmitted
           rcCfmFlrStatsCurrMinFlFrames 1.3.6.1.4.1.2272.1.69.24.1.34 counter32 read-only
Minimum sample Frame Loss frames
           rcCfmFlrStatsCurrSamplesNotSent 1.3.6.1.4.1.2272.1.69.24.1.35 gauge32 read-only
Samples not sent
           rcCfmFlrStatsCurrSamplesReceived 1.3.6.1.4.1.2272.1.69.24.1.36 gauge32 read-only
Samples received
           rcCfmFlrStatsCurrMinFlFarEndFrames 1.3.6.1.4.1.2272.1.69.24.1.37 counter32 read-only
Minimum sample Far-end Frame Loss frames
           rcCfmFlrStatsCurrMaxFlFrames 1.3.6.1.4.1.2272.1.69.24.1.38 counter32 read-only
Maximum sample Frame Loss frames
           rcCfmFlrStatsCurrMaxFlFarEndFrames 1.3.6.1.4.1.2272.1.69.24.1.39 counter32 read-only
Maximum sample Far-end Frame Loss frames
 rcCfmFlrStatsHistTable 1.3.6.1.4.1.2272.1.69.25 no-access
CFM Frame Loss Ratio Stats History
       rcCfmFlrStatsHistEntry 1.3.6.1.4.1.2272.1.69.25.1 no-access
CFM Frame Loss Ratio Stats History entry.
           rcCfmFlrStatsHistMdIndex 1.3.6.1.4.1.2272.1.69.25.1.1 integer32 no-access
Maintenance Domain Name
           rcCfmFlrStatsHistMaIndex 1.3.6.1.4.1.2272.1.69.25.1.2 integer32 no-access
Maintenance Association Name
           rcCfmFlrStatsHistMepId 1.3.6.1.4.1.2272.1.69.25.1.3 integer32 no-access
Maintenance EndPoint ID
           rcCfmFlrStatsHistRmepId 1.3.6.1.4.1.2272.1.69.25.1.4 integer32 no-access
Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId
           rcCfmFlrStatsHistPriorityIndex 1.3.6.1.4.1.2272.1.69.25.1.5 integer32 no-access
priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0
           rcCfmFlrStatsHistIndex 1.3.6.1.4.1.2272.1.69.25.1.6 integer32 no-access
History Index
           rcCfmFlrStatsHistMdName 1.3.6.1.4.1.2272.1.69.25.1.7 displaystring read-only
Maintenance Domain Name
           rcCfmFlrStatsHistMaName 1.3.6.1.4.1.2272.1.69.25.1.8 displaystring read-only
Maintenance Association Name
           rcCfmFlrStatsHistPriority 1.3.6.1.4.1.2272.1.69.25.1.9 integer32 read-only
Frame Loss Ratio messaging runs on COS priority
           rcCfmFlrStatsHistStatus 1.3.6.1.4.1.2272.1.69.25.1.10 integer read-only
The status of this history interval. Enumeration: 'complete': 1, 'incomplete': 2.
           rcCfmFlrStatsHistStartTime 1.3.6.1.4.1.2272.1.69.25.1.11 octet string read-only
The date and time stamp.
           rcCfmFlrStatsHistEndTime 1.3.6.1.4.1.2272.1.69.25.1.12 octet string read-only
The date and time stamp.
           rcCfmFlrStatsHistHistInterval 1.3.6.1.4.1.2272.1.69.25.1.13 gauge32 read-only
History Interval
           rcCfmFlrStatsHistSampleRate 1.3.6.1.4.1.2272.1.69.25.1.14 gauge32 read-only
Sample rate in seconds
           rcCfmFlrStatsHistNearEndPercent 1.3.6.1.4.1.2272.1.69.25.1.15 integer32 read-only
Measured near-end FLR percentage
           rcCfmFlrStatsHistNearEndSubPercent 1.3.6.1.4.1.2272.1.69.25.1.16 integer32 read-only
Measured near-end FLR sub percentage
           rcCfmFlrStatsHistFarEndPercent 1.3.6.1.4.1.2272.1.69.25.1.17 integer32 read-only
Measured far-end FLR percentage
           rcCfmFlrStatsHistFarEndSubPercent 1.3.6.1.4.1.2272.1.69.25.1.18 integer32 read-only
Measured far-end FLR sub percentage
           rcCfmFlrStatsHistMinNearEndPercent 1.3.6.1.4.1.2272.1.69.25.1.19 integer32 read-only
Measured near-end FLR percentage
           rcCfmFlrStatsHistMinNearEndSubPercent 1.3.6.1.4.1.2272.1.69.25.1.20 integer32 read-only
Measured near-end FLR sub percentage
           rcCfmFlrStatsHistMinFarEndPercent 1.3.6.1.4.1.2272.1.69.25.1.21 integer32 read-only
Measured near-end FLR percentage
           rcCfmFlrStatsHistMinFarEndSubPercent 1.3.6.1.4.1.2272.1.69.25.1.22 integer32 read-only
Measured near-end FLR sub percentage
           rcCfmFlrStatsHistMaxNearEndPercent 1.3.6.1.4.1.2272.1.69.25.1.23 integer32 read-only
Measured near-end FLR percentage
           rcCfmFlrStatsHistMaxNearEndSubPercent 1.3.6.1.4.1.2272.1.69.25.1.24 integer32 read-only
Measured near-end FLR sub percentage
           rcCfmFlrStatsHistMaxFarEndPercent 1.3.6.1.4.1.2272.1.69.25.1.25 integer32 read-only
Measured near-end FLR percentage
           rcCfmFlrStatsHistMaxFarEndSubPercent 1.3.6.1.4.1.2272.1.69.25.1.26 integer32 read-only
Measured near-end FLR sub percentage
           rcCfmFlrStatsHistTxFrames 1.3.6.1.4.1.2272.1.69.25.1.27 counter64 read-only
Tx frames
           rcCfmFlrStatsHistRxFrames 1.3.6.1.4.1.2272.1.69.25.1.28 counter64 read-only
Rx frames
           rcCfmFlrStatsHistFlFrames 1.3.6.1.4.1.2272.1.69.25.1.29 counter64 read-only
Frame Loss frames
           rcCfmFlrStatsHistTxFarEndFrames 1.3.6.1.4.1.2272.1.69.25.1.30 counter64 read-only
Far-end Tx frames
           rcCfmFlrStatsHistRxFarEndFrames 1.3.6.1.4.1.2272.1.69.25.1.31 counter64 read-only
Far-end Rx frames
           rcCfmFlrStatsHistFlFarEndFrames 1.3.6.1.4.1.2272.1.69.25.1.32 counter64 read-only
Far-end Frame Loss frames
           rcCfmFlrStatsHistSamplesPerInterval 1.3.6.1.4.1.2272.1.69.25.1.33 gauge32 read-only
Samples per interval
           rcCfmFlrStatsHistSamplesTransmitted 1.3.6.1.4.1.2272.1.69.25.1.34 gauge32 read-only
Samples transmitted
           rcCfmFlrStatsHistMinFlFrames 1.3.6.1.4.1.2272.1.69.25.1.35 counter32 read-only
Minimum sample Frame Loss frames
           rcCfmFlrStatsHistSamplesNotSent 1.3.6.1.4.1.2272.1.69.25.1.36 gauge32 read-only
Samples not sent
           rcCfmFlrStatsHistSamplesReceived 1.3.6.1.4.1.2272.1.69.25.1.37 gauge32 read-only
Samples received
           rcCfmFlrStatsHistMinFlFarEndFrames 1.3.6.1.4.1.2272.1.69.25.1.38 counter32 read-only
Minimum sample Far-end Frame Loss frames
           rcCfmFlrStatsHistMaxFlFrames 1.3.6.1.4.1.2272.1.69.25.1.39 counter32 read-only
Maximum sample Frame Loss frames
           rcCfmFlrStatsHistMaxFlFarEndFrames 1.3.6.1.4.1.2272.1.69.25.1.40 counter32 read-only
Maximum sample Far-end Frame Loss frames
 rcCfmFdStatsInfoTable 1.3.6.1.4.1.2272.1.69.26 no-access
CFM Frame Delay Stats Info
       rcCfmFdStatsInfoEntry 1.3.6.1.4.1.2272.1.69.26.1 no-access
Frame Delay Stats Info entry.
           rcCfmFdStatsInfoMdIndex 1.3.6.1.4.1.2272.1.69.26.1.1 integer32 no-access
Maintenance Domain Name
           rcCfmFdStatsInfoMaIndex 1.3.6.1.4.1.2272.1.69.26.1.2 integer32 no-access
Maintenance Association Name
           rcCfmFdStatsInfoMepId 1.3.6.1.4.1.2272.1.69.26.1.3 integer32 no-access
Maintenance EndPoint ID
           rcCfmFdStatsInfoRmepId 1.3.6.1.4.1.2272.1.69.26.1.4 integer32 no-access
Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId
           rcCfmFdStatsInfoPriorityIndex 1.3.6.1.4.1.2272.1.69.26.1.5 integer32 no-access
priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0
           rcCfmFdStatsInfoMdName 1.3.6.1.4.1.2272.1.69.26.1.6 displaystring read-only
Maintenance Domain Name
           rcCfmFdStatsInfoMaName 1.3.6.1.4.1.2272.1.69.26.1.7 displaystring read-only
Maintenance Association Name
           rcCfmFdStatsInfoPriority 1.3.6.1.4.1.2272.1.69.26.1.8 integer32 read-only
Frame Delay messaging runs on COS priority
           rcCfmFdStatsInfoFdPercent 1.3.6.1.4.1.2272.1.69.26.1.9 integer32 read-only
Measured FD percentage
           rcCfmFdStatsInfoFdSubPercent 1.3.6.1.4.1.2272.1.69.26.1.10 integer32 read-only
Measured FD sub percentage
           rcCfmFdStatsInfoFdvPercent 1.3.6.1.4.1.2272.1.69.26.1.11 integer32 read-only
Measured FDV percentage
           rcCfmFdStatsInfoFdvSubPercent 1.3.6.1.4.1.2272.1.69.26.1.12 integer32 read-only
Measured FDV sub percentage
           rcCfmFdStatsInfoPmOperState 1.3.6.1.4.1.2272.1.69.26.1.13 rccfmpmoperstate read-only
The operational state of the PM.
 rcCfmFdStatsCurrTable 1.3.6.1.4.1.2272.1.69.27 no-access
CFM Frame Delay Stats Current
       rcCfmFdStatsCurrEntry 1.3.6.1.4.1.2272.1.69.27.1 no-access
CFM Frame Delay Stats Current entry.
           rcCfmFdStatsCurrMdIndex 1.3.6.1.4.1.2272.1.69.27.1.1 integer32 no-access
Maintenance Domain Name
           rcCfmFdStatsCurrMaIndex 1.3.6.1.4.1.2272.1.69.27.1.2 integer32 no-access
Maintenance Association Name
           rcCfmFdStatsCurrMepId 1.3.6.1.4.1.2272.1.69.27.1.3 integer32 no-access
Maintenance EndPoint ID
           rcCfmFdStatsCurrRmepId 1.3.6.1.4.1.2272.1.69.27.1.4 integer32 no-access
Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId
           rcCfmFdStatsCurrPriorityIndex 1.3.6.1.4.1.2272.1.69.27.1.5 integer32 no-access
priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0
           rcCfmFdStatsCurrMdName 1.3.6.1.4.1.2272.1.69.27.1.6 displaystring read-only
Maintenance Domain Name
           rcCfmFdStatsCurrMaName 1.3.6.1.4.1.2272.1.69.27.1.7 displaystring read-only
Maintenance Association Name
           rcCfmFdStatsCurrPriority 1.3.6.1.4.1.2272.1.69.27.1.8 integer32 read-only
Frame Delay messaaging runs on COS priority
           rcCfmFdStatsCurrFdPercent 1.3.6.1.4.1.2272.1.69.27.1.9 integer32 read-only
Measured FD percentage
           rcCfmFdStatsCurrFdSubPercent 1.3.6.1.4.1.2272.1.69.27.1.10 integer32 read-only
Measured FD sub percentage
           rcCfmFdStatsCurrFdvPercent 1.3.6.1.4.1.2272.1.69.27.1.11 integer32 read-only
Measured FDV percentage
           rcCfmFdStatsCurrFdvSubPercent 1.3.6.1.4.1.2272.1.69.27.1.12 integer32 read-only
Measured FDV sub percentage
           rcCfmFdStatsCurrPmOperState 1.3.6.1.4.1.2272.1.69.27.1.13 rccfmpmoperstate read-only
The operational state of the PM.
           rcCfmFdStatsCurrStartTime 1.3.6.1.4.1.2272.1.69.27.1.14 octet string read-only
The date and time stamp.
           rcCfmFdStatsCurrEndTime 1.3.6.1.4.1.2272.1.69.27.1.15 octet string read-only
The date and time stamp.
           rcCfmFdStatsCurrHistInterval 1.3.6.1.4.1.2272.1.69.27.1.16 gauge32 read-only
History Interval
           rcCfmFdStatsCurrSampleRate 1.3.6.1.4.1.2272.1.69.27.1.17 gauge32 read-only
Sample rate in seconds
           rcCfmFdStatsCurrTarget 1.3.6.1.4.1.2272.1.69.27.1.18 counter32 read-only
FD target in microseconds
           rcCfmFdStatsCurrAverage 1.3.6.1.4.1.2272.1.69.27.1.19 counter32 read-only
FD average in microseconds
           rcCfmFdStatsCurrMinimum 1.3.6.1.4.1.2272.1.69.27.1.20 counter32 read-only
FD minimum in microseconds
           rcCfmFdStatsCurrMaximum 1.3.6.1.4.1.2272.1.69.27.1.21 counter32 read-only
FD maximum in microseconds
           rcCfmFdStatsCurrFdvTarget 1.3.6.1.4.1.2272.1.69.27.1.22 counter32 read-only
FDV target in microseconds
           rcCfmFdStatsCurrFdvAverage 1.3.6.1.4.1.2272.1.69.27.1.23 counter32 read-only
FDV average in microseconds
           rcCfmFdStatsCurrFdvMinimum 1.3.6.1.4.1.2272.1.69.27.1.24 counter32 read-only
FDV minimum in microseconds
           rcCfmFdStatsCurrFdvMaximum 1.3.6.1.4.1.2272.1.69.27.1.25 counter32 read-only
FDV maximum in microseconds
           rcCfmFdStatsCurrSamplesPerInterval 1.3.6.1.4.1.2272.1.69.27.1.26 gauge32 read-only
Samples per interval
           rcCfmFdStatsCurrSamplesTransmitted 1.3.6.1.4.1.2272.1.69.27.1.27 gauge32 read-only
Samples transmitted
           rcCfmFdStatsCurrSamplesNotSent 1.3.6.1.4.1.2272.1.69.27.1.28 gauge32 read-only
Samples not sent
           rcCfmFdStatsCurrSamplesReceived 1.3.6.1.4.1.2272.1.69.27.1.29 gauge32 read-only
Samples received
 rcCfmFdStatsHistTable 1.3.6.1.4.1.2272.1.69.28 no-access
CFM Frame Delay Stats History
       rcCfmFdStatsHistEntry 1.3.6.1.4.1.2272.1.69.28.1 no-access
CFM Frame Delay Stats History entry.
           rcCfmFdStatsHistMdIndex 1.3.6.1.4.1.2272.1.69.28.1.1 integer32 no-access
Maintenance Domain Name
           rcCfmFdStatsHistMaIndex 1.3.6.1.4.1.2272.1.69.28.1.2 integer32 no-access
Maintenance Association Name
           rcCfmFdStatsHistMepId 1.3.6.1.4.1.2272.1.69.28.1.3 integer32 no-access
Maintenance EndPoint ID
           rcCfmFdStatsHistRmepId 1.3.6.1.4.1.2272.1.69.28.1.4 integer32 no-access
Peer Identifier which matches a RemoteMepId. The performance monitoring pair is MepId-RmepId
           rcCfmFdStatsHistPriorityIndex 1.3.6.1.4.1.2272.1.69.28.1.5 integer32 no-access
priorityIndex equals priority plus 1 - priority can't be used as an index since it starts from 0
           rcCfmFdStatsHistIndex 1.3.6.1.4.1.2272.1.69.28.1.6 integer32 no-access
History Index
           rcCfmFdStatsHistMdName 1.3.6.1.4.1.2272.1.69.28.1.7 displaystring read-only
Maintenance Domain Name
           rcCfmFdStatsHistMaName 1.3.6.1.4.1.2272.1.69.28.1.8 displaystring read-only
Maintenance Association Name
           rcCfmFdStatsHistPriority 1.3.6.1.4.1.2272.1.69.28.1.9 integer32 read-only
Frame Delay messaging runs on COS priority
           rcCfmFdStatsHistFdPercent 1.3.6.1.4.1.2272.1.69.28.1.10 integer32 read-only
Measured FD percentage
           rcCfmFdStatsHistFdSubPercent 1.3.6.1.4.1.2272.1.69.28.1.11 integer32 read-only
Measured FD sub percentage
           rcCfmFdStatsHistFdvPercent 1.3.6.1.4.1.2272.1.69.28.1.12 integer32 read-only
Measured FDV percentage
           rcCfmFdStatsHistFdvSubPercent 1.3.6.1.4.1.2272.1.69.28.1.13 integer32 read-only
Measured FDV sub percentage
           rcCfmFdStatsHistStatus 1.3.6.1.4.1.2272.1.69.28.1.14 integer read-only
The status of this history interval. Enumeration: 'complete': 1, 'incomplete': 2.
           rcCfmFdStatsHistStartTime 1.3.6.1.4.1.2272.1.69.28.1.15 octet string read-only
The date and time stamp.
           rcCfmFdStatsHistEndTime 1.3.6.1.4.1.2272.1.69.28.1.16 octet string read-only
The date and time stamp.
           rcCfmFdStatsHistHistInterval 1.3.6.1.4.1.2272.1.69.28.1.17 gauge32 read-only
History Interval
           rcCfmFdStatsHistSampleRate 1.3.6.1.4.1.2272.1.69.28.1.18 gauge32 read-only
Sample rate in seconds
           rcCfmFdStatsHistTarget 1.3.6.1.4.1.2272.1.69.28.1.19 counter32 read-only
FD target in microseconds
           rcCfmFdStatsHistAverage 1.3.6.1.4.1.2272.1.69.28.1.20 counter32 read-only
FD average in microseconds
           rcCfmFdStatsHistMinimum 1.3.6.1.4.1.2272.1.69.28.1.21 counter32 read-only
FD minimum in microseconds
           rcCfmFdStatsHistMaximum 1.3.6.1.4.1.2272.1.69.28.1.22 counter32 read-only
FD maximum in microseconds
           rcCfmFdStatsHistFdvTarget 1.3.6.1.4.1.2272.1.69.28.1.23 counter32 read-only
FDV target in microseconds
           rcCfmFdStatsHistFdvAverage 1.3.6.1.4.1.2272.1.69.28.1.24 counter32 read-only
FDV average in microseconds
           rcCfmFdStatsHistFdvMinimum 1.3.6.1.4.1.2272.1.69.28.1.25 counter32 read-only
FDV minimum in microseconds
           rcCfmFdStatsHistFdvMaximum 1.3.6.1.4.1.2272.1.69.28.1.26 counter32 read-only
FDV maximum in microseconds
           rcCfmFdStatsHistSamplesPerInterval 1.3.6.1.4.1.2272.1.69.28.1.27 gauge32 read-only
Samples per interval
           rcCfmFdStatsHistSamplesTransmitted 1.3.6.1.4.1.2272.1.69.28.1.28 gauge32 read-only
Samples transmitted
           rcCfmFdStatsHistSamplesNotSent 1.3.6.1.4.1.2272.1.69.28.1.29 gauge32 read-only
Samples not sent
           rcCfmFdStatsHistSamplesReceived 1.3.6.1.4.1.2272.1.69.28.1.30 gauge32 read-only
Samples received
 rcCfmPmTable 1.3.6.1.4.1.2272.1.69.29 no-access
CFM Performance Monitoring Configuration
       rcCfmPmEntry 1.3.6.1.4.1.2272.1.69.29.1 no-access
Connectivity Fault Management Performance Monitoring entry.
           rcCfmPmMdIndex 1.3.6.1.4.1.2272.1.69.29.1.1 integer32 no-access
Maintenance Domain Name
           rcCfmPmMaIndex 1.3.6.1.4.1.2272.1.69.29.1.2 integer32 no-access
Maintenance Association Name
           rcCfmPmMepId 1.3.6.1.4.1.2272.1.69.29.1.3 integer32 no-access
Maintenance EndPoint ID
           rcCfmPmRmepId 1.3.6.1.4.1.2272.1.69.29.1.4 integer32 no-access
Remote Maintenance Endpoint ID. The performance monitoring pair is MepId-RmepId
           rcCfmPmMdName 1.3.6.1.4.1.2272.1.69.29.1.5 displaystring read-only
Maintenance Domain Name
           rcCfmPmMaName 1.3.6.1.4.1.2272.1.69.29.1.6 displaystring read-only
Maintenance Association Name
           rcCfmPmRowStatus 1.3.6.1.4.1.2272.1.69.29.1.7 rowstatus read-only
Used to create/delete entries
           rcCfmPmState 1.3.6.1.4.1.2272.1.69.29.1.8 enablevalue read-only
Performance Monitoring State
           rcCfmPmFdList 1.3.6.1.4.1.2272.1.69.29.1.9 displaystring read-only
Comma separated list of Frame-Delay profile names. Valid profile names must first be created using rcCfmFdProfileName. Number of entries in the list is indicated by rcCfmPmFdSize.
           rcCfmPmFdSize 1.3.6.1.4.1.2272.1.69.29.1.10 integer32 read-only
Number of Frame-Delay profiles names
           rcCfmPmFlrList 1.3.6.1.4.1.2272.1.69.29.1.11 displaystring read-only
Comma separated list of Frame-Loss-Ratio profile names. Valid profile names must first be created using rcCfmFlrProfileName. Number of entries in the list is indicated by rcCfmPmFlrSize.
           rcCfmPmFlrSize 1.3.6.1.4.1.2272.1.69.29.1.12 integer32 read-only
Number of FLR profile names in FLR list
           rcCfmPmHistoryInterval 1.3.6.1.4.1.2272.1.69.29.1.13 integer read-only
History summary interval in minutes Enumeration: 'hi5': 5, 'hi120': 120, 'hi15': 15, 'hi720': 720, 'hi1440': 1440, 'hi30': 30, 'hi360': 360, 'hi60': 60.
           rcCfmPmSampleRate 1.3.6.1.4.1.2272.1.69.29.1.14 integer read-only
Sample rate once per sample interval specified in seconds Enumeration: 'si1': 1, 'si60': 60, 'si3600': 3600, 'si900': 900, 'si1800': 1800, 'si10': 10, 'si30': 30.
 rcCfmLtrTable 1.3.6.1.4.1.2272.1.69.32 no-access
This table contains a list of Linktrace replies received by a specific MEP in response to a linktrace message.
       rcCfmLtrEntry 1.3.6.1.4.1.2272.1.69.32.1 no-access
The Linktrace Reply table entry.
           rcCfmLtrDomainIndex 1.3.6.1.4.1.2272.1.69.32.1.1 integer32 no-access
Maintenance Domain Index
           rcCfmLtrAssociationIndex 1.3.6.1.4.1.2272.1.69.32.1.2 integer32 no-access
Maintenance Association Index
           rcCfmLtrMepId 1.3.6.1.4.1.2272.1.69.32.1.3 integer32 no-access
Maintenance EndPoint ID
           rcCfmLtrSeqNumber 1.3.6.1.4.1.2272.1.69.32.1.4 integer32 no-access
The transaction identifier/sequence number returned by a previous transmit linkrace message command, indicating which LTM's response is going to be returned.
           rcCfmLtrTtl 1.3.6.1.4.1.2272.1.69.32.1.5 integer32 no-access
Ttl field value for a returned LTR.
           rcCfmLtrReceiveOrder 1.3.6.1.4.1.2272.1.69.32.1.6 integer32 no-access
An index to distinguish among multiple LTRs with the same LTR Transaction Identifier field value. This value is assigned sequentially from 1, in the order that the Linktrace Initiator received the LTRs.
           rcCfmLtrDomainName 1.3.6.1.4.1.2272.1.69.32.1.7 displaystring read-only
Maintenance Domain Name
           rcCfmLtrAssociationName 1.3.6.1.4.1.2272.1.69.32.1.8 displaystring read-only
Maintenance Association Name
           rcCfmLtrForwarded 1.3.6.1.4.1.2272.1.69.32.1.9 truthvalue read-only
Indicates if a LTM was forwarded by the responding MP, as returned in the 'FwdYes' flag of the flags field.
           rcCfmLtrTerminalMep 1.3.6.1.4.1.2272.1.69.32.1.10 truthvalue read-only
A boolean value stating whether the forwarded LTM reached a MEP enclosing its MA, as returned in the Terminal MEP flag of the Flags field.
           rcCfmLtrLastEgressIdentifier 1.3.6.1.4.1.2272.1.69.32.1.11 octet string read-only
An octet field holding the Last Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Last Egress Identifier identifies the MEP Linktrace Indicator that originated, or the Linktrace Responder that forwarded, the LTM to which this LTR is the response. This is the same value as the Egress Identifier TLV of that LTM.
           rcCfmLtrNextEgressIdentifier 1.3.6.1.4.1.2272.1.69.32.1.12 octet string read-only
An octet field holding the Next Egress Identifier returned in the LTR Egress Identifier TLV of the LTR. The Next Egress Identifier Identifies the Linktrace Responder that transmitted this LTR, and can forward the LTM to the next hop. This is the same value as the Egress Identifier TLV of the forwarded LTM, if any. If the FwdYes bit of the Flags field is false, the contents of this field are undefined, and the field is ignored by the receiver.
           rcCfmLtrRelayAction 1.3.6.1.4.1.2272.1.69.32.1.13 cfmrelayactionfieldvalue read-only
Value returned in the Relay Action field.
           rcCfmLtrSrcMac 1.3.6.1.4.1.2272.1.69.32.1.14 macaddress read-only
Mac address of the MP that respond to the LTM request for this LTR
           rcCfmLtrIngressAction 1.3.6.1.4.1.2272.1.69.32.1.15 cfmingressactionfieldvalue read-only
The value returned in the Ingress Action Field of the LTM. The value ingNoTlv(5) indicates that no Reply Ingress TLV was returned in the LTM.
           rcCfmLtrIngressMac 1.3.6.1.4.1.2272.1.69.32.1.16 macaddress read-only
Mac address returned in the ingress MAC address field. If the rcCfmLtrIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless.
           rcCfmLtrIngressPortIdSubtype 1.3.6.1.4.1.2272.1.69.32.1.17 lldpportidsubtype read-only
Format of the Ingress Port ID. If the rcCfmLtrIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless.
           rcCfmLtrIngressPortId 1.3.6.1.4.1.2272.1.69.32.1.18 lldpportid read-only
Ingress Port ID. The format of this object is determined by the value of the rcCfmLtrIngressPortIdSubtype object. If the rcCfmLtrIngress object contains the value ingNoTlv(5), then the contents of this object are meaningless.
           rcCfmLtrEgressAction 1.3.6.1.4.1.2272.1.69.32.1.19 cfmegressactionfieldvalue read-only
The value returned in the Egress Action Field of the LTM. The value egrNoTlv(5) indicates that no Reply Egress TLV was returned in the LTM.
           rcCfmLtrEgressMac 1.3.6.1.4.1.2272.1.69.32.1.20 macaddress read-only
Mac address returned in the egress MAC address field. If the rcCfmLtrEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless.
           rcCfmLtrEgressPortIdSubtype 1.3.6.1.4.1.2272.1.69.32.1.21 lldpportidsubtype read-only
Format of the Egress Port ID. If the rcCfmLtrEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless.
           rcCfmLtrEgressPortId 1.3.6.1.4.1.2272.1.69.32.1.22 lldpportid read-only
Egress Port ID. The format of this object is determined by the value of the rcCfmLtrEgressPortIdSubtype object. If the rcCfmLtrEgress object contains the value egrNoTlv(5), then the contents of this object are meaningless.