RAY-MIB: View SNMP OID List / Download MIB

VENDOR: RACOM S.R.O.


 Home MIB: RAY-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, SNMPv2-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 racom 1.3.6.1.4.1.33555
             ray 1.3.6.1.4.1.33555.1
The MIB module defines management objects for RAy product series. Revision 201610040000Z.
                 station 1.3.6.1.4.1.33555.1.1
                     product 1.3.6.1.4.1.33555.1.1.1
                         productName 1.3.6.1.4.1.33555.1.1.1.1 displaystring read-only
Product name.
                         serialNumber 1.3.6.1.4.1.33555.1.1.1.2 gauge32 read-only
Product serial number.
                         unitType 1.3.6.1.4.1.33555.1.1.1.3 displaystring read-only
Station type (L or H) and number of the Ethernet ports (1 or 2).
                     info 1.3.6.1.4.1.33555.1.1.2
                         deviceName 1.3.6.1.4.1.33555.1.1.2.1 displaystring read-only
Station name.
                         swVer 1.3.6.1.4.1.33555.1.1.2.2 displaystring read-only
Firmware version.
                         swVerRadio 1.3.6.1.4.1.33555.1.1.2.3 displaystring read-only
Radio firmware version.
                     status 1.3.6.1.4.1.33555.1.1.3
                         systemStatus 1.3.6.1.4.1.33555.1.1.3.1 integer read-only
Unit status. Enumeration: 'na': 0, 'alarm': 3, 'warning': 2, 'ok': 1.
                         lineStatus 1.3.6.1.4.1.33555.1.1.3.2 integer read-only
Radio link status. Supported by RAy10 only. Enumeration: 'na': 0, 'connecting': 3, 'ok': 1, 'searching': 4, 'analyzer': 2.
                         peerNumber 1.3.6.1.4.1.33555.1.1.3.3 gauge32 read-only
Peer station serial number.
                         rfPowerStatus 1.3.6.1.4.1.33555.1.1.3.4 integer read-only
RF Power amplifier OK/Failure. Enumeration: 'fail': 2, 'na': 0, 'ok': 1.
                         searchModeDisabled 1.3.6.1.4.1.33555.1.1.3.5 optionsetting read-only
Search mode disabled on/off. Supported by RAy10 only.
                         ethPeer 1.3.6.1.4.1.33555.1.1.3.6 servicestate read-only
Peer station user Ethernet link status. Not supported by RAy2.
                         securePeerMode 1.3.6.1.4.1.33555.1.1.3.7 optionsetting read-only
Secure peer mode. Not supported by RAy10.
                         lineStatusII 1.3.6.1.4.1.33555.1.1.3.8 integer read-only
Radio link status. Not supported by RAy10. Enumeration: 'ok': 5, 'na': 0, 'setup': 1, 'analyzer': 6, 'authorizing': 4, 'single': 2, 'connecting': 3.
                         eth1Link 1.3.6.1.4.1.33555.1.1.3.9 servicestate read-only
Ethernet 1 link status. Supported by RAy2 only.
                         eth2Link 1.3.6.1.4.1.33555.1.1.3.10 servicestate read-only
Ethernet 2 link status. Supported by RAy2 only.
                     chassis 1.3.6.1.4.1.33555.1.1.4
                         temperatureModem 1.3.6.1.4.1.33555.1.1.4.1 integer32 read-only
Modem temperature in hundredths of Celsius (C).
                         temperatureRadio 1.3.6.1.4.1.33555.1.1.4.2 integer32 read-only
Radio temperature in hundredths of Celsius (C).
                         voltageUnit 1.3.6.1.4.1.33555.1.1.4.3 integer32 read-only
Power supply voltage in tenths of Volts (V).
                         voltageSource 1.3.6.1.4.1.33555.1.1.4.4 integer read-only
Source of supply voltage. Supported by RAy2 only. Enumeration: 'na': 0, 'poe': 2, 'aux': 1.
                     system 1.3.6.1.4.1.33555.1.1.5
                         useCpu 1.3.6.1.4.1.33555.1.1.5.1 integer read-only
System use CPU in %.
                         useMemory 1.3.6.1.4.1.33555.1.1.5.2 integer read-only
System use memory in %.
                         useLogStorage 1.3.6.1.4.1.33555.1.1.5.3 integer read-only
Use storage for log in %.
                     access 1.3.6.1.4.1.33555.1.1.6
                         sshd 1.3.6.1.4.1.33555.1.1.6.1 integer read-only
Management interface: SSH. Enumeration: 'on': 1, 'onlykey': 2, 'off': 3.
                         telnetd 1.3.6.1.4.1.33555.1.1.6.2 optionsetting read-only
Management interface: Telnet.
                         httpd 1.3.6.1.4.1.33555.1.1.6.3 optionsetting read-only
Management interface: HTTP.
                         ip 1.3.6.1.4.1.33555.1.1.6.4 ipaddress read-only
Management interface: IP address.
                         mac 1.3.6.1.4.1.33555.1.1.6.5 physaddress read-only
Management interface: MAC address.
                         managementVlan 1.3.6.1.4.1.33555.1.1.6.6 optionsetting read-only
Management interface: VLAN on/off.
                         managementVlanId 1.3.6.1.4.1.33555.1.1.6.7 integer32 read-only
Management interface: VLAN ID.
                         wifiHAP 1.3.6.1.4.1.33555.1.1.6.8 optionsetting read-only
Management interface: WiFi Host Access Point.
                     authorization 1.3.6.1.4.1.33555.1.1.7
                         keyTable 1.3.6.1.4.1.33555.1.1.7.1 no-access
List of product key entries. Supported by RAy10 only.
                             keyEntry 1.3.6.1.4.1.33555.1.1.7.1.1 no-access
Product key entry. Supported by RAy10 only.
                                 keyName 1.3.6.1.4.1.33555.1.1.7.1.1.1 displaystring read-only
Product key name. Supported by RAy10 only.
                     alarm 1.3.6.1.4.1.33555.1.1.8
                         alarmTemperature 1.3.6.1.4.1.33555.1.1.8.1 alarmstate read-only
Temperature alarm state. Supported by RAy2 only.
                         alarmVoltageLow 1.3.6.1.4.1.33555.1.1.8.2 alarmstate read-only
Low voltage alarm state. Supported by RAy2 only.
                         alarmVoltageHigh 1.3.6.1.4.1.33555.1.1.8.3 alarmstate read-only
High voltage alarm state. Supported by RAy2 only.
                         alarmRss 1.3.6.1.4.1.33555.1.1.8.4 alarmstate read-only
RSS alarm state. Supported by RAy2 only.
                         alarmSnr 1.3.6.1.4.1.33555.1.1.8.5 alarmstate read-only
SNR alarm state. Supported by RAy2 only.
                         alarmBer 1.3.6.1.4.1.33555.1.1.8.6 alarmstate read-only
BER alarm state. Supported by RAy2 only.
                         alarmPeerDisconnected 1.3.6.1.4.1.33555.1.1.8.7 alarmstate read-only
Peer disconnect alarm state. Supported by RAy2 only.
                         alarmEth1Down 1.3.6.1.4.1.33555.1.1.8.8 alarmstate read-only
Ethernet 1 Link Down alarm state. Supported by RAy2 only.
                         alarmEth2Down 1.3.6.1.4.1.33555.1.1.8.9 alarmstate read-only
Ethernet 2 Link Down alarm state. Supported by RAy2 only.
                         alarmRfPowerFail 1.3.6.1.4.1.33555.1.1.8.10 alarmstate read-only
RF Power Fail alarm state. Supported by RAy2 only.
                         alarmNetBitrate 1.3.6.1.4.1.33555.1.1.8.11 alarmstate read-only
Air Speed below Limit alarm state. Supported by RAy2 only.
                         alarmWifiOn 1.3.6.1.4.1.33555.1.1.8.12 alarmstate read-only
WiFi Host Access Oint on. Supported by RAy2 only.
                 interface 1.3.6.1.4.1.33555.1.2
                     ifRadio 1.3.6.1.4.1.33555.1.2.1
                         rxChannel 1.3.6.1.4.1.33555.1.2.1.1 displaystring read-only
Receiver channel ID.
                         txChannel 1.3.6.1.4.1.33555.1.2.1.2 displaystring read-only
Transceiver channel ID.
                         rxFreq 1.3.6.1.4.1.33555.1.2.1.3 gauge32 read-only
Receiver frequency in kHz.
                         txFreq 1.3.6.1.4.1.33555.1.2.1.4 gauge32 read-only
Transceiver frequency in kHz.
                         rxModulation 1.3.6.1.4.1.33555.1.2.1.5 displaystring read-only
Rx modulation text ID.
                         txModulation 1.3.6.1.4.1.33555.1.2.1.6 displaystring read-only
Tx modulation text ID.
                         rxModulationIndex 1.3.6.1.4.1.33555.1.2.1.7 modulationlist read-only
Rx modulation index.
                         txModulationIndex 1.3.6.1.4.1.33555.1.2.1.8 modulationlist read-only
Tx modulation index.
                         bandwidth 1.3.6.1.4.1.33555.1.2.1.9 integer read-only
Radio channel bandwidth. Supported by RAy10 only. Enumeration: 'bw-14MHz': 2, 'na': 0, 'bw-7MHz': 3, 'bw-28MHz': 1.
                         coding 1.3.6.1.4.1.33555.1.2.1.10 integer read-only
Channel coding level. Supported by RAy10 only. Enumeration: 'na': 0, 'hi': 2, 'low': 1.
                         matching 1.3.6.1.4.1.33555.1.2.1.11 optionsetting read-only
Channel matching.
                         rfPowerConfigured 1.3.6.1.4.1.33555.1.2.1.12 integer32 read-only
Configured RF Power in dBm.
                         netBitrate 1.3.6.1.4.1.33555.1.2.1.13 integer32 read-only
Current net bitrate in kbps.
                         maxNetBitrate 1.3.6.1.4.1.33555.1.2.1.14 integer32 read-only
Maximum net bitrate in Mbps.
                         bandwidthKHz 1.3.6.1.4.1.33555.1.2.1.15 integer32 read-only
Radio channel bandwidth in kHz. Not supported by RAy10.
                         channelArrangement 1.3.6.1.4.1.33555.1.2.1.16 integer read-only
Channel arrangement. Not supported by RAy10. Enumeration: 'na': 0, 'ccdp': 3, 'accp': 1, 'acap': 2.
                         rfPowerCurrent 1.3.6.1.4.1.33555.1.2.1.17 integer32 read-only
Current RF Power in dBm. Not supported by RAy10.
                     ifEth 1.3.6.1.4.1.33555.1.2.2
                         ifEthTable 1.3.6.1.4.1.33555.1.2.2.1 no-access
List of Ethernet interfaces.
                             ifEthEntry 1.3.6.1.4.1.33555.1.2.2.1.1 no-access
Ethernet interface entry.
                                 speed 1.3.6.1.4.1.33555.1.2.2.1.1.1 integer32 read-only
Ethernet speed.
                                 duplex 1.3.6.1.4.1.33555.1.2.2.1.1.2 integer read-only
Ethernet duplex. Enumeration: 'na': 0, 'full': 1, 'half': 2.
                                 mdix 1.3.6.1.4.1.33555.1.2.2.1.1.3 integer read-only
Ethernet MDI-X / MDI. Enumeration: 'na': 0, 'mdi-x': 2, 'mdi': 1.
                                 autonego 1.3.6.1.4.1.33555.1.2.2.1.1.4 optionsetting read-only
Ethernet autonego.
                                 pause 1.3.6.1.4.1.33555.1.2.2.1.1.5 optionsetting read-only
Ethernet pause.
                                 asymPause 1.3.6.1.4.1.33555.1.2.2.1.1.6 optionsetting read-only
Ethernet asymmetric pause.
                         prioritized 1.3.6.1.4.1.33555.1.2.2.2 optionsetting read-only
Ethernet prioritized VLAN support. Supported by RAy10 only.
                         vlanId 1.3.6.1.4.1.33555.1.2.2.3 integer32 read-only
Ethernet prioritized VLAN ID. Supported by RAy10 only.
                         serviceVlanId 1.3.6.1.4.1.33555.1.2.2.4 integer32 read-only
Ethernet service VLAN ID between local and remote station. Not supported by RAy2.
                 statistic 1.3.6.1.4.1.33555.1.3
                     modemR 1.3.6.1.4.1.33555.1.3.1
                         rxPauseFrames 1.3.6.1.4.1.33555.1.3.1.1 counter32 read-only
Number of received Control frames with a valid PAUSE op-code. Supported by RAy10 only.
                         rxControlFrames 1.3.6.1.4.1.33555.1.3.1.2 counter32 read-only
Number of received Control frames. Supported by RAy10 only.
                         rxBroadcast 1.3.6.1.4.1.33555.1.3.1.3 counter32 read-only
Number of received packets with a broadcast destination address. Supported by RAy10 only.
                         rxMulticast 1.3.6.1.4.1.33555.1.3.1.4 counter32 read-only
Number of received packets with a multicast destination address. Supported by RAy10 only.
                         rxDones 1.3.6.1.4.1.33555.1.3.1.5 counter32 read-only
Number of successfully received packets. Supported by RAy10 only.
                         rxOutOfRangeErrors 1.3.6.1.4.1.33555.1.3.1.6 counter32 read-only
Number of received frames larger than 1518 bytes (the frame Type/Length field is indicating a value larger than 1518 bytes). Supported by RAy10 only.
                         rxCrcErrors 1.3.6.1.4.1.33555.1.3.1.7 counter32 read-only
Number of received frames with the CRC which does not match the internally generated CRC. Supported by RAy10 only.
                         rxCodeErrors 1.3.6.1.4.1.33555.1.3.1.8 counter32 read-only
Number of received packets with one or more erroneous nibbles. Supported by RAy10 only.
                         rxFalseCarrierErrors 1.3.6.1.4.1.33555.1.3.1.9 counter32 read-only
Rx false carrier errors. Supported by RAy10 only.
                         rxDroppedPkts 1.3.6.1.4.1.33555.1.3.1.10 counter32 read-only
Number of dropped packets. Supported by RAy10 only.
                         rxHCBytes 1.3.6.1.4.1.33555.1.3.1.11 counter64 read-only
Number of received bytes. Supported by RAy10 only.
                         txPauseFrames 1.3.6.1.4.1.33555.1.3.1.12 counter32 read-only
Number of transmitted Control frames with a valid PAUSE op-code. Supported by RAy10 only.
                         txControlFrames 1.3.6.1.4.1.33555.1.3.1.13 counter32 read-only
Number of transmitted Control frames. Supported by RAy10 only.
                         txBroadcast 1.3.6.1.4.1.33555.1.3.1.14 counter32 read-only
Number of transmitted packets with a broadcast destination address. Supported by RAy10 only.
                         txMulticast 1.3.6.1.4.1.33555.1.3.1.15 counter32 read-only
Number of transmitted packets with a multicast destination address. Supported by RAy10 only.
                         txDones 1.3.6.1.4.1.33555.1.3.1.16 counter32 read-only
Number of successfully transmitted packets. Supported by RAy10 only.
                         txLengthCheckErrors 1.3.6.1.4.1.33555.1.3.1.17 counter32 read-only
Number of transmitted packets with the frame Length field (not a Type field) value that does not match the actual data byte length. Supported by RAy10 only.
                         txCrcErrors 1.3.6.1.4.1.33555.1.3.1.18 counter32 read-only
Number of transmitted frames with the CRC which does not match the internally generated CRC. Supported by RAy10 only.
                         txCollisions 1.3.6.1.4.1.33555.1.3.1.19 counter32 read-only
Tx collisions. Supported by RAy10 only.
                         txHCBytes 1.3.6.1.4.1.33555.1.3.1.20 counter64 read-only
Number of transmitted bytes. Supported by RAy10 only.
                     radio 1.3.6.1.4.1.33555.1.3.2
                         rss 1.3.6.1.4.1.33555.1.3.2.1 integer32 read-only
Receiving RSS indicator in decimal dBm (-39 -> -3,9).
                         snr 1.3.6.1.4.1.33555.1.3.2.2 integer32 read-only
Receiving SNR indicator in decimal dB (39 -> 3,9).
                         fecBlockCounter 1.3.6.1.4.1.33555.1.3.2.3 counter32 read-only
Total block counter for BER calculation. Block size is 2048 bits. Supported by RAy10 only.
                         fecUncorrectBlockCounter 1.3.6.1.4.1.33555.1.3.2.4 counter32 read-only
Incorrect block counter for BER calculation. Block size is 2048 bits. Supported by RAy10 only.
                         timeAllConnect 1.3.6.1.4.1.33555.1.3.2.5 timeticks read-only
Overall link uptime.
                         timeAllDisconnect 1.3.6.1.4.1.33555.1.3.2.6 timeticks read-only
Overall link downtime.
                         timeMaxDisconnect 1.3.6.1.4.1.33555.1.3.2.7 timeticks read-only
The longest drop (disconnecting).
                         numDisconnect 1.3.6.1.4.1.33555.1.3.2.8 counter32 read-only
Number of drops (disconnecting).
                         reliability 1.3.6.1.4.1.33555.1.3.2.9 integer32 read-only
Reliability in thousandths of %.
                         linkUptime 1.3.6.1.4.1.33555.1.3.2.10 timeticks read-only
Current radio link uptime. Not supported by RAy10.
                         ber 1.3.6.1.4.1.33555.1.3.2.11 integer32 read-only
Bit Error Rate (BER) multiplied by 10^9. Not supported by RAy10.
                     ethernet 1.3.6.1.4.1.33555.1.3.3
                         ethInThroughput 1.3.6.1.4.1.33555.1.3.3.1 integer32 read-only
Input Ethernet 1 data port throughput in kbps. Not supported by RAy10.
                         ethOutThroughput 1.3.6.1.4.1.33555.1.3.3.2 integer32 read-only
Output Ethernet 1 data port throughput in kbps. Not supported by RAy10.
                         eth2InThroughput 1.3.6.1.4.1.33555.1.3.3.3 integer32 read-only
Input Ethernet 2 data port throughput in kbps. Supported by RAy2 only.
                         eth2OutThroughput 1.3.6.1.4.1.33555.1.3.3.4 integer32 read-only
Output Ethernet 2 data port throughput in kbps. Supported by RAy2 only.
                 rayTraps 1.3.6.1.4.1.33555.1.10
                       airDisconnect 1.3.6.1.4.1.33555.1.10.1
Air line disconnected. Not supported by RAy2.
                       airConnect 1.3.6.1.4.1.33555.1.10.2
Air line connected after being disconnected. Not supported by RAy2.
                       airWdog 1.3.6.1.4.1.33555.1.10.3
Air watch dog. Supported by RAy10 only.
                       tempAlarm 1.3.6.1.4.1.33555.1.10.4
Temperature exceeded the threshold. Not supported by RAy2.
                       powerAlarm 1.3.6.1.4.1.33555.1.10.5
Power voltage is out of the thresholds. Not supported by RAy2.
                       memoryAlarm 1.3.6.1.4.1.33555.1.10.6
Memory use exceeded the threshold. Supported by RAy10 only.
                       rssAlarm 1.3.6.1.4.1.33555.1.10.7
RSS exceeded the threshold. Not supported by RAy2.
                       snrAlarm 1.3.6.1.4.1.33555.1.10.8
SNR exceeded the threshold. Not supported by RAy2.
                       berAlarm 1.3.6.1.4.1.33555.1.10.9
BER exceeded the threshold. Not supported by RAy2.
                       rfPowerFail 1.3.6.1.4.1.33555.1.10.10
RF Power amplifier failure. Not supported.
                       peerEthLinkDown 1.3.6.1.4.1.33555.1.10.11
Peer station Ethernet link Up/Down. Not supported by RAy2.
                 ray2Traps 1.3.6.1.4.1.33555.1.11
                       tr2TemperatureAlarm 1.3.6.1.4.1.33555.1.11.1
Temperature exceeded the threshold. Supported by RAy2 only.
                       tr2VoltageLowAlarm 1.3.6.1.4.1.33555.1.11.2
Supply voltage below minimal threshold. Supported by RAy2 only.
                       tr2VoltageHighAlarm 1.3.6.1.4.1.33555.1.11.3
Supply voltage above maximal threshold. Supported by RAy2 only.
                       tr2RssAlarm 1.3.6.1.4.1.33555.1.11.4
RSS exceeded the threshold. Supported by RAy2 only.
                       tr2SnrAlarm 1.3.6.1.4.1.33555.1.11.5
SNR exceeded the threshold. Supported by RAy2 only.
                       tr2BerAlarm 1.3.6.1.4.1.33555.1.11.6
BER exceeded the threshold. Supported by RAy2 only.
                       tr2AirDisconnect 1.3.6.1.4.1.33555.1.11.7
Air line disconnected. Supported by RAy2 only.
                       tr2AirConnect 1.3.6.1.4.1.33555.1.11.8
Air line connected after being disconnected. Supported by RAy2 (up to fw 2.1.7.0) only.
                       tr2Eth1LinkDown 1.3.6.1.4.1.33555.1.11.9
Local station Ethernet 1 link Up/Down. Supported by RAy2 only.
                       tr2Eth21LinkDown 1.3.6.1.4.1.33555.1.11.10
Local station Ethernet 2 link Up/Down. Supported by RAy2 only.
                       tr2RfPowerFail 1.3.6.1.4.1.33555.1.11.11
RF Power amplifier failure. Supported by RAy2 only.
                       tr2NetBitrate 1.3.6.1.4.1.33555.1.11.12
Air speed below threshold. Supported by RAy2 only.
                       tr2WifiOn 1.3.6.1.4.1.33555.1.11.13
WiFi Host Access Point is on. Supported by RAy2 only.