RADLAN-rlMacMulticast-MIB: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: RADLAN-rlMacMulticast-MIB
Download as:   
SNMPv2-CONF, RADLAN-DEVICEPARAMS-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, Q-BRIDGE-MIB, RADLAN-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
   rlIgmpMldSnoopTriplePlayPort 1.3.6.1.4.1.89.0.208
Informational trap indicating that a query was recieved on a triple play port.
   rlbrgIgmpSnoopQrrDuplicateIP 1.3.6.1.4.1.89.0.227
Warning trap indicating that duplicate ip\ipv6 address occured between two queries
     rlMacMulticastEnable 1.3.6.1.4.1.89.55.1 truthvalue read-write
Enable/Disable MAC Multicast bridging in the device.
     rlIgmpSnoop 1.3.6.1.4.1.89.55.2
         rlIgmpSnoopMibVersion 1.3.6.1.4.1.89.55.2.1 integer read-only
MIB's version, the current version is 3. IGMP Snooping supports IGMPv3.
         rlIgmpSnoopEnable 1.3.6.1.4.1.89.55.2.2 truthvalue read-write
Enable/Disable IGMP Snooping in the switch.
         rlIgmpSnoopHostAgingTime 1.3.6.1.4.1.89.55.2.3 integer read-write
The amount of time that should pass before aging out an entry in the rlIgmpSnoopGroupTable will be aged out.
         rlIgmpSnoopRouterAgingTime 1.3.6.1.4.1.89.55.2.4 integer read-write
The amount of time that should pass before aging out an entry in the rlIgmpSnoopInterfaceTable will be aged out.
         rlIgmpSnoopVlanTable 1.3.6.1.4.1.89.55.2.7 no-access
The table listing the per vlan parameters : enable/disable , aging-out timers , filter ports and permanent ports.
             rlIgmpSnoopVlanEntry 1.3.6.1.4.1.89.55.2.7.1 no-access
An entry (conceptual row) in the rlIgmpSnoopVlanTable.
                 rlIgmpSnoopVlanTag 1.3.6.1.4.1.89.55.2.7.1.1 integer read-only
The tag of the VLAN for which this entry contains information for an IP Multicast Router.
                 rlIgmpSnoopVlanEnable 1.3.6.1.4.1.89.55.2.7.1.2 truthvalue read-write
Enable/Disable IGMP Snooping in the vlan.
                 rlIgmpSnoopVlanRouterLearn 1.3.6.1.4.1.89.55.2.7.1.3 truthvalue read-write
Enable/Disable of Learning of routers in the vlan.
                 rlIgmpSnoopVlanHostTimeOut 1.3.6.1.4.1.89.55.2.7.1.4 integer read-write
The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan.
                 rlIgmpSnoopVlanQuerierTimeOut 1.3.6.1.4.1.89.55.2.7.1.5 integer read-write
The amount of time where no query is heard until querier is activated
                 rlIgmpSnoopVlanRouterTimeOut 1.3.6.1.4.1.89.55.2.7.1.6 integer read-write
The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan.
                 rlIgmpSnoopVlanLeaveTimeOut 1.3.6.1.4.1.89.55.2.7.1.7 integer read-write
The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry.
                 rlIgmpSnoopVlanIgmpVersion 1.3.6.1.4.1.89.55.2.7.1.8 igmpversion read-only
The current IGMP protocol version running on the VLAN.
                 rlIgmpSnoopVlanRouterPortlist 1.3.6.1.4.1.89.55.2.7.1.9 portlist read-only
List of router ports learned dynamically on this VLAN from PIM, DVMRP, MRDISC and IGMP Query messages
         rlIgmpSnoopIGMP224ReportsHandle 1.3.6.1.4.1.89.55.2.8 integer read-write
This varaiable indicates whether to allow IGMP reports for groups in the 224.0.0.X range when the group address is already manually configured or to ignore. Enumeration: 'ignore': 2, 'allow': 1.
         rlIgmpSnoopMulticastTvTable 1.3.6.1.4.1.89.55.2.10 no-access
multicast vlan used for this port
               rlIgmpSnoopMulticastTvEntry 1.3.6.1.4.1.89.55.2.10.1 no-access
entry of multicast ip
                   rlIgmpSnoopMulticastTvVID 1.3.6.1.4.1.89.55.2.10.1.1 vlanindex read-only
Specify the multicast ip to be used.
                   rlIgmpSnoopMulticastTvGroup 1.3.6.1.4.1.89.55.2.10.1.2 ipaddress read-only
Specify the multicast ip to be used.
                   rlIgmpSnoopMulticastTvStatus 1.3.6.1.4.1.89.55.2.10.1.3 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
         rlIgmpSnoopMembershipTable 1.3.6.1.4.1.89.55.2.11 no-access
The table listing the IP multicast memberships.
               rlIgmpSnoopMembershipEntry 1.3.6.1.4.1.89.55.2.11.1 no-access
An entry (conceptual row) in the rlIgmpSnoopMembershipTable.
                   rlIgmpSnoopMembershipVlanTag 1.3.6.1.4.1.89.55.2.11.1.1 vlanindex read-only
The VLAN tag for which this entry contains multicast membership information.
                   rlIgmpSnoopMembershipGroupIpAddress 1.3.6.1.4.1.89.55.2.11.1.2 ipaddress read-only
The multicast group address.
                   rlIgmpSnoopMembershipSourceIpAddress 1.3.6.1.4.1.89.55.2.11.1.3 ipaddress read-only
The unicast source address.
                   rlIgmpSnoopMembershipIncPortlist 1.3.6.1.4.1.89.55.2.11.1.4 portlist read-only
Included ports, where a report message was heard for the group (IGMP version 2|1) or group and source address (IGMP version 3).
                   rlIgmpSnoopMembershipExcPortlist 1.3.6.1.4.1.89.55.2.11.1.5 portlist read-only
Excluded ports where an exclude report message was heard for the group and source address (IGMP version 3).
                   rlIgmpSnoopMembershipExpiryTime 1.3.6.1.4.1.89.55.2.11.1.6 integer read-only
Time till entry will expire.
                   rlIgmpSnoopMembershipCompatibilityMode 1.3.6.1.4.1.89.55.2.11.1.7 igmpversion read-only
IGMP group compatibility mode.
         rlIgmpSnoopQuerierVlanTable 1.3.6.1.4.1.89.55.2.12 no-access
A table that contains IGMP Snooping Querier information about every vlan. This is indexed by vlan tag.
               rlIgmpSnoopQuerierVlanEntry 1.3.6.1.4.1.89.55.2.12.1 no-access
An entry (conceptual row) in the rlIgmpSnoopQuerierVlanTable.
                   rlIgmpSnoopQuerierVlanTag 1.3.6.1.4.1.89.55.2.12.1.1 vlanindex read-only
An IGMP Snoop Querier entry vlan tag.
                   rlIgmpSnoopQuerierAdminEnable 1.3.6.1.4.1.89.55.2.12.1.2 truthvalue read-write
The desired administrative state of IGMP Snoop Querier on the vlan.
                   rlIgmpSnoopQuerierOperEnable 1.3.6.1.4.1.89.55.2.12.1.3 truthvalue read-only
The current operational state of IGMP Snoop Querier on the vlan.
                   rlIgmpSnoopQuerierAdminAddr 1.3.6.1.4.1.89.55.2.12.1.4 ipaddress read-write
The desired IP address is being used in IGMP Snoop Querier messages on the vlan.
                   rlIgmpSnoopQuerierOperAddr 1.3.6.1.4.1.89.55.2.12.1.5 ipaddress read-only
The current operational IP address is being used in IGMP Snoop Querier messages on the vlan.
                   rlIgmpSnoopQuerierAdminVersionNumber 1.3.6.1.4.1.89.55.2.12.1.6 igmpversion read-write
The highest version number of IGMP Snoop Querier for the vlan.
                   rlIgmpSnoopQuerierOperVersionNumber 1.3.6.1.4.1.89.55.2.12.1.7 igmpversion read-only
The current operational version number of IGMP Snoop Querier for the vlan.
                   rlIgmpSnoopQuerierElectionEnable 1.3.6.1.4.1.89.55.2.12.1.8 truthvalue read-write
Whether or not to participate in querier election. When true, the snooping querier participates in querier election. When false, the snooping querier is the elected querier until a general query is heard from another router on the vlan (always lose).
         rlIgmpSnoopQuerierEnable 1.3.6.1.4.1.89.55.2.13 truthvalue read-write
Globally enable/disable IGMP Snooping Querier in the switch.
     rlMacMulticastMaxEntriesNum 1.3.6.1.4.1.89.55.3 integer read-only
The maximum number of Mac Multicast entries the device supports.
     rlMacMulticastFilter 1.3.6.1.4.1.89.55.4
         rlMacMulticastUnregFilterEnable 1.3.6.1.4.1.89.55.4.1 portlist read-write
Each bit represent a port whether Unregistered Multicast Filtering enable
     rlMldSnoop 1.3.6.1.4.1.89.55.5
         rlMldSnoopEnable 1.3.6.1.4.1.89.55.5.1 truthvalue read-write
Enable/Disable Mld Snooping in the switch.
         rlMldSnoopHostAgingTime 1.3.6.1.4.1.89.55.5.2 integer read-write
The amount of time that should pass before aging out an entry in the rlMldSnoopGroupTable will be aged out.
         rlMldSnoopRouterAgingTime 1.3.6.1.4.1.89.55.5.3 integer read-write
The amount of time that should pass before aging out an entry in the rlMldSnoopInterfaceTable will be aged out.
         rlIgmpMldSnoopMembershipTable 1.3.6.1.4.1.89.55.5.4 no-access
The table listing the IP multicast memberships.
             rlIgmpMldSnoopMembershipEntry 1.3.6.1.4.1.89.55.5.4.1 no-access
An entry (conceptual row) in the rlIgmpMldSnoopMembershipTable.
                 rlIgmpMldSnoopMembershipVlanTag 1.3.6.1.4.1.89.55.5.4.1.1 vlanindex read-only
The VLAN tag for which this entry contains multicast membership information.
                 rlIgmpMldSnoopMembershipGroupIpAddressType 1.3.6.1.4.1.89.55.5.4.1.2 inetaddresstype read-only
Inet type IPv4/IPv6.
                 rlIgmpMldSnoopMembershipGroupIpAddress 1.3.6.1.4.1.89.55.5.4.1.3 inetaddress read-only
The multicast group address.
                 rlIgmpMldSnoopMembershipSourceIpAddressType 1.3.6.1.4.1.89.55.5.4.1.4 inetaddresstype read-only
Inet type IPv4/IPv6.
                 rlIgmpMldSnoopMembershipSourceIpAddress 1.3.6.1.4.1.89.55.5.4.1.5 inetaddress read-only
The unicast source address.
                 rlIgmpMldSnoopMembershipIncPortlist 1.3.6.1.4.1.89.55.5.4.1.6 portlist read-only
Included ports, where a report message was heard for the group (IGMPv2/V1 or MLDv1) or group and source address (IGMPv3/MLDv2).
                 rlIgmpMldSnoopMembershipExcPortlist 1.3.6.1.4.1.89.55.5.4.1.7 portlist read-only
list of excluded ports to which an exclude report message was heard for the group and source address (IGMPv3/MLDv2 ).
                 rlIgmpMldSnoopMembershipExpiryTime 1.3.6.1.4.1.89.55.5.4.1.8 integer read-only
Time till entry will expire.
                 rlIgmpMldSnoopMembershipCompatibilityMode 1.3.6.1.4.1.89.55.5.4.1.9 igmpversion read-only
IGMP/MLD group compatibility mode.
         rlIgmpMldSnoopVlanTable 1.3.6.1.4.1.89.55.5.5 no-access
The table lists the per vlan parameters : enable/disable , aging-out timers , filter ports and permanent ports.
             rlIgmpMldSnoopVlanEntry 1.3.6.1.4.1.89.55.5.5.1 no-access
An entry (conceptual row) in the rlIgmpSnoopVlanTable.
                 rlIgmpMldSnoopVlanInetAddressType 1.3.6.1.4.1.89.55.5.5.1.1 inetaddresstype read-only
Inet type ipv6/ipv4.
                 rlIgmpMldSnoopVlanTag 1.3.6.1.4.1.89.55.5.5.1.2 integer read-only
The tag of the VLAN for which this entry contains information for an IP Multicast Router.
                 rlIgmpMldSnoopVlanEnable 1.3.6.1.4.1.89.55.5.5.1.3 truthvalue read-write
Enable/Disable IGMP Snooping in the vlan.
                 rlIgmpMldSnoopVlanRouterLearn 1.3.6.1.4.1.89.55.5.5.1.4 truthvalue read-write
Enable/Disable of Learning of routers in the vlan.
                 rlIgmpMldSnoopVlanHostTimeOut 1.3.6.1.4.1.89.55.5.5.1.5 integer read-write
The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan.
                 rlIgmpMldSnoopVlanQuerierTimeOut 1.3.6.1.4.1.89.55.5.5.1.6 integer read-write
The amount of time where no query is heard until querier is activated
                 rlIgmpMldSnoopVlanRouterTimeOut 1.3.6.1.4.1.89.55.5.5.1.7 integer read-write
The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan.
                 rlIgmpMldSnoopVlanLeaveTimeOut 1.3.6.1.4.1.89.55.5.5.1.8 integer read-write
The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry.
                 rlIgmpMldSnoopVlanIgmpVersion 1.3.6.1.4.1.89.55.5.5.1.9 igmpversion read-only
The current IGMP protocol version running on the VLAN.
                 rlIgmpMldSnoopVlanRouterPortlist 1.3.6.1.4.1.89.55.5.5.1.10 portlist read-only
List of router ports learned dynamically from PIM, DVMRP, MRDISC, MOSPF and IGMP/MLD Query messages on this VLAN
                 rlIgmpMldSnoopVlanRouterStaticPortlist 1.3.6.1.4.1.89.55.5.5.1.11 portlist read-write
List of router ports configured statically on this VLAN.
                 rlIgmpMldSnoopVlanRouterForbiddenPortlist 1.3.6.1.4.1.89.55.5.5.1.12 portlist read-write
List of ports statically configured to NOT be router ports on this VLAN
                 rlIgmpMldSnoopVlanQueryOverride 1.3.6.1.4.1.89.55.5.5.1.13 truthvalue read-write
Enable/Disable overriding of Query values
                 rlIgmpMldSnoopVlanOperRobustness 1.3.6.1.4.1.89.55.5.5.1.14 unsigned32 read-only
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP and MLD are robust to (Robustness Variable-1) packet losses.
                 rlIgmpMldSnoopVlanOperQueryInterval 1.3.6.1.4.1.89.55.5.5.1.15 unsigned32 read-only
The frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. This variable must be a non-zero value.
                 rlIgmpMldSnoopVlanOperQueryMaxResponseTime 1.3.6.1.4.1.89.55.5.5.1.16 unsigned32 read-only
The maximum query response interval advertised in MGMDv2 or v3 queries on this interface.
                 rlIgmpMldSnoopVlanOperLastMemberQueryInterval 1.3.6.1.4.1.89.55.5.5.1.17 unsigned32 read-only
The Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if mgmdRouterInterfaceVersion is 1.
                 rlIgmpMldSnoopVlanOperLastMemberQueryCount 1.3.6.1.4.1.89.55.5.5.1.18 unsigned32 read-only
Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members.
                 rlIgmpMldSnoopVlanOperStartupQueryInterval 1.3.6.1.4.1.89.55.5.5.1.19 unsigned32 read-only
This variable represents the interval between General Queries sent by a Querier on startup.
                 rlIgmpMldSnoopVlanOperStartupQueryCount 1.3.6.1.4.1.89.55.5.5.1.20 unsigned32 read-only
Represents the number of Queries sent out on startup separated by the Startup Query Interval.
                 rlIgmpMldSnoopVlanOperHostTimeOut 1.3.6.1.4.1.89.55.5.5.1.21 unsigned32 read-only
The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. DEFVAL { rlIgmpMldSnoopVlanOperRobustness * rlIgmpMldSnoopVlanOperQueryInterval + rlIgmpMldSnoopVlanOperQueryMaxResponseTime }
                 rlIgmpMldSnoopVlanOperRouterTimeOut 1.3.6.1.4.1.89.55.5.5.1.22 unsigned32 read-only
The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. DEFVAL { rlIgmpMldSnoopVlanOperRobustness * rlIgmpMldSnoopVlanOperQueryInterval }
                 rlIgmpMldSnoopVlanOperLeaveTimeOut 1.3.6.1.4.1.89.55.5.5.1.23 unsigned32 read-only
The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry. DEFVAL { rlIgmpMldSnoopVlanOperLastMemberQueryCount * rlIgmpMldSnoopVlanOperLastMemberQueryInterval }
                 rlIgmpMldSnoopVlanAdminRobustness 1.3.6.1.4.1.89.55.5.5.1.24 unsigned32 read-write
The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP and MLD are robust to (Robustness Variable-1) packet losses.
                 rlIgmpMldSnoopVlanAdminQueryInterval 1.3.6.1.4.1.89.55.5.5.1.25 unsigned32 read-write
The frequency at which IGMP or MLD Host-Query packets are transmitted on this interface. This variable must be a non-zero value.
                 rlIgmpMldSnoopVlanAdminQueryMaxResponseTime 1.3.6.1.4.1.89.55.5.5.1.26 unsigned32 read-write
The maximum query response interval advertised in MGMDv2 or v3 queries on this interface.
                 rlIgmpMldSnoopVlanAdminLastMemberQueryInterval 1.3.6.1.4.1.89.55.5.5.1.27 unsigned32 read-write
The Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. This value may be tuned to modify the leave latency of the network. A reduced value results in reduced time to detect the loss of the last member of a group. The value of this object is irrelevant if mgmdRouterInterfaceVersion is 1.
                 rlIgmpMldSnoopVlanAdminLastMemberQueryCount 1.3.6.1.4.1.89.55.5.5.1.28 unsigned32 read-write
Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members. Value 0 is used to indicate usage of default value. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness }
                 rlIgmpMldSnoopVlanAdminStartupQueryInterval 1.3.6.1.4.1.89.55.5.5.1.29 unsigned32 read-write
This variable represents the interval between General Queries sent by a Querier on startup.
                 rlIgmpMldSnoopVlanAdminStartupQueryCount 1.3.6.1.4.1.89.55.5.5.1.30 unsigned32 read-write
Represents the number of Queries sent out on startup separated by the Startup Query Interval.
                 rlIgmpMldSnoopVlanAdminHostTimeOut 1.3.6.1.4.1.89.55.5.5.1.31 unsigned32 read-write
The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness * rlIgmpMldSnoopVlanAdminQueryInterval + rlIgmpMldSnoopVlanAdminQueryMaxResponseTime }
                 rlIgmpMldSnoopVlanAdminRouterTimeOut 1.3.6.1.4.1.89.55.5.5.1.32 unsigned32 read-write
The amount of time that should pass before aging out a port in the router ports dynamically learnt for this vlan. DEFVAL { rlIgmpMldSnoopVlanAdminRobustness * rlIgmpMldSnoopVlanAdminQueryInterval }
                 rlIgmpMldSnoopVlanAdminLeaveTimeOut 1.3.6.1.4.1.89.55.5.5.1.33 unsigned32 read-write
The amount of time that should pass before aging out an entry in the rlIgmpSnoopMembershipTable for this vlan, after recieving a leave/exclude message from the port of the entry. DEFVAL { rlIgmpMldSnoopVlanAdminLastMemberQueryCount * rlIgmpMldSnoopVlanAdminLastMemberQueryInterval }
                 rlIgmpMldSnoopVlanIsImmediateLeave 1.3.6.1.4.1.89.55.5.5.1.34 truthvalue read-write
Enable/Disable immediate leave on this Vlan
         rlIgmpMldSnoopMulticastTvTable 1.3.6.1.4.1.89.55.5.6 no-access
multicast vlan used for this port
             rlIgmpMldSnoopMulticastTvEntry 1.3.6.1.4.1.89.55.5.6.1 no-access
entry of multicast ip
                 rlIgmpMldSnoopMulticastTvInetAddressType 1.3.6.1.4.1.89.55.5.6.1.1 inetaddresstype read-only
Inet type ipv6/ipv4.
                 rlIgmpMldSnoopMulticastTvVID 1.3.6.1.4.1.89.55.5.6.1.2 vlanindex read-only
Specify the multicast ip to be used.
                 rlIgmpMldSnoopMulticastTvGroupAddressType 1.3.6.1.4.1.89.55.5.6.1.3 inetaddresstype read-only
Inet type ipv6/ipv4.
                 rlIgmpMldSnoopMulticastTvGroup 1.3.6.1.4.1.89.55.5.6.1.4 inetaddress read-only
Specify the multicast ip to be used.
                 rlIgmpMldSnoopMulticastTvStatus 1.3.6.1.4.1.89.55.5.6.1.5 rowstatus read-write
The row status variable, used according to row installation and removal conventions.
         rlMldSnoopQuerierVlanTable 1.3.6.1.4.1.89.55.5.7 no-access
A table that contains MLD Snooping Querier information about every vlan. This is indexed by vlan tag.
             rlMldSnoopQuerierVlanEntry 1.3.6.1.4.1.89.55.5.7.1 no-access
An entry (conceptual row) in the rlMldSnoopQuerierVlanTable.
                 rlMldSnoopQuerierVlanTag 1.3.6.1.4.1.89.55.5.7.1.1 vlanindex read-only
An MLD Snoop Querier entry vlan tag.
                 rlMldSnoopQuerierAdminEnable 1.3.6.1.4.1.89.55.5.7.1.2 truthvalue read-write
The desired administrative state of MLD Snoop Querier on the vlan.
                 rlMldSnoopQuerierOperEnable 1.3.6.1.4.1.89.55.5.7.1.3 truthvalue read-only
The current operational state of MLD Snoop Querier on the vlan.
                 rlMldSnoopQuerierAdminAddrInetAddressType 1.3.6.1.4.1.89.55.5.7.1.4 inetaddresstype read-only
Inet type IPv6/IPv4.
                 rlMldSnoopQuerierAdminAddr 1.3.6.1.4.1.89.55.5.7.1.5 inetaddress read-write
The desired IP address is being used in MLD Snoop Querier messages on the vlan.
                 rlMldSnoopQuerierOperAddrInetAddressType 1.3.6.1.4.1.89.55.5.7.1.6 inetaddresstype read-only
Inet type IPv6/IPv4.
                 rlMldSnoopQuerierOperAddr 1.3.6.1.4.1.89.55.5.7.1.7 inetaddress read-only
The current operational IP address is being used in MLD Snoop Querier messages on the vlan.
                 rlMldSnoopQuerierAdminVersionNumber 1.3.6.1.4.1.89.55.5.7.1.8 mldversion read-write
The highest version number of MLD Snoop Querier for the vlan.
                 rlMldSnoopQuerierOperVersionNumber 1.3.6.1.4.1.89.55.5.7.1.9 mldversion read-only
The current operational version number of MLD Snoop Querier for the vlan.
                 rlMldSnoopQuerierElectionEnable 1.3.6.1.4.1.89.55.5.7.1.10 truthvalue read-write
Whether or not to participate in querier election. When true, the snooping querier participates in querier election. When false, the snooping querier is the elected querier until a general query is heard from another router on the vlan (always lose).
         rlMldSnoopQuerierEnable 1.3.6.1.4.1.89.55.5.8 truthvalue read-write
Globally enable/disable MLD Snooping Querier in the switch.
         rlIgmpMldSnoopQuerierGlobalAddressTable 1.3.6.1.4.1.89.55.5.9 no-access
A table that contains IGMP/MLD Snooping Querier global address.
             rlIgmpMldSnoopQuerierGlobalAddressEntry 1.3.6.1.4.1.89.55.5.9.1 no-access
An entry (conceptual row) in the rlIgmpMldSnoopQuerierGlobalAddressTable.
                 rlIgmpMldSnoopQuerierGlobalAddressIPVersion 1.3.6.1.4.1.89.55.5.9.1.1 inetversion no-access
The IP version of this PIM interface. A physical interface may be configured in multiple modes concurrently, e.g., IPv4 and IPv6; however, the traffic is considered to be logically separate.
                 rlIgmpMldSnoopQuerierGlobalAddressType 1.3.6.1.4.1.89.55.5.9.1.2 inetaddresstype read-only
Inet type IPv6/IPv4.
                 rlIgmpMldSnoopQuerierGlobalAddress 1.3.6.1.4.1.89.55.5.9.1.3 inetaddress read-write
The desired address to used in IGMP/MLD Snoop Querier messages if such an address is not configured on the vlan.
 rlMacMulticastUnregFilterFailed 1.3.6.1.4.1.890.1
Warning trap indicating - Setting Mac Unregistered Filtering on port is failed. The bound variable rndErrorDesc provides the interface number.