RADLAN-OSPFV3-LSDB-MIB: View SNMP OID List / Download MIB

VENDOR: RND


 Home MIB: RADLAN-OSPFV3-LSDB-MIB
Download as:   
SNMPv2-CONF, RADLAN-OSPF-MIB, SNMPv2-SMI, OSPF-MIB, INET-ADDRESS-MIB, RADLAN-OSPFV3-MIB, RADLAN-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 rlOspfv3Lsdb 1.3.6.1.4.1.89.222
The private MIB module definition for OSPF LSA Database MIB.
         rlOspfv3RouterLsaTable 1.3.6.1.4.1.89.222.1 no-access
Router Link State Advertisement.
             rlOspfv3RouterLsaEntry 1.3.6.1.4.1.89.222.1.1 no-access
A single entry from Router LSA.
                 rlOspfv3RouterLsaProcessId 1.3.6.1.4.1.89.222.1.1.1 rlospfprocessid read-only
A 32-bit integer uniquely identifying an OSPFv3 process.
                 rlOspfv3RouterLsaAreaId 1.3.6.1.4.1.89.222.1.1.2 areaid read-only
The 32 bit identifier of the Area from which the LSA was received.
                 rlOspfv3RouterLsaLsid 1.3.6.1.4.1.89.222.1.1.3 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
                 rlOspfv3RouterLsaRouterId 1.3.6.1.4.1.89.222.1.1.4 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                 rlOspfv3RouterLsaIdx 1.3.6.1.4.1.89.222.1.1.5 unsigned32 read-only
The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
                 rlOspfv3RouterLsaCount 1.3.6.1.4.1.89.222.1.1.6 unsigned32 read-only
Number of entries containg is the LSA.
                 rlOspfv3RouterLsaSequence 1.3.6.1.4.1.89.222.1.1.7 integer32 read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
                 rlOspfv3RouterLsaAge 1.3.6.1.4.1.89.222.1.1.8 integer32 read-only
This field is the age of the link state advertisement in seconds.
                 rlOspfv3RouterLsaChecksum 1.3.6.1.4.1.89.222.1.1.9 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
                 rlOspfv3RouterLsaLength 1.3.6.1.4.1.89.222.1.1.10 unsigned32 read-only
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
                 rlOspfv3RouterLsaBitW 1.3.6.1.4.1.89.222.1.1.11 integer read-only
When set, the router is a wild-card multicast receiver. When running MOSPF, these routers receive all multicast datagrams, regardless of destination. Enumeration: 'on': 2, 'off': 1.
                 rlOspfv3RouterLsaBitV 1.3.6.1.4.1.89.222.1.1.12 integer read-only
When set, the router is an endpoint of one or more fully adjacent virtual links having the described area as Transit area (V is for virtual link endpoint). Enumeration: 'on': 2, 'off': 1.
                 rlOspfv3RouterLsaBitE 1.3.6.1.4.1.89.222.1.1.13 integer read-only
When set, the router is an AS boundary router (E is for external). Enumeration: 'on': 2, 'off': 1.
                 rlOspfv3RouterLsaBitB 1.3.6.1.4.1.89.222.1.1.14 integer read-only
When set, the router is an area border router (B is for border). Enumeration: 'on': 2, 'off': 1.
                 rlOspfv3RouterLsaOptions 1.3.6.1.4.1.89.222.1.1.15 unsigned32 read-only
The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain.
                 rlOspfv3RouterLsaType 1.3.6.1.4.1.89.222.1.1.16 integer read-only
A quick description of the router link. Enumeration: 'transitNetwork': 2, 'pointToPoint': 1, 'virtualLink': 4, 'stubNetwork': 3.
                 rlOspfv3RouterLsaMetric 1.3.6.1.4.1.89.222.1.1.17 unsigned32 read-only
The cost of using this router link.
                 rlOspfv3RouterLsaInterfaceID 1.3.6.1.4.1.89.222.1.1.18 unsigned32 read-only
The Interface ID assigned to the interface being described.
                 rlOspfv3RouterLsaNeighborInterfaceID 1.3.6.1.4.1.89.222.1.1.19 unsigned32 read-only
The Interface ID the neighbor router (or the attached link's Designated Router, for Type 2 interfaces) has been advertising in hello packets sent on the attached link.
                 rlOspfv3RouterLsaNeighborRouterID 1.3.6.1.4.1.89.222.1.1.20 routerid read-only
The Router ID the neighbor router (or the attached link's Designated Router, for Type 2 interfaces).
         rlOspfv3NetworkLsaTable 1.3.6.1.4.1.89.222.2 no-access
Network Link State Advertisement.
             rlOspfv3NetworkLsaEntry 1.3.6.1.4.1.89.222.2.1 no-access
A single entry from Network LSA.
                 rlOspfv3NetworkLsaProcessId 1.3.6.1.4.1.89.222.2.1.1 rlospfprocessid read-only
A 32-bit integer uniquely identifying an OSPFv3 process.
                 rlOspfv3NetworkLsaAreaId 1.3.6.1.4.1.89.222.2.1.2 areaid read-only
The 32 bit identifier of the Area from which the LSA was received.
                 rlOspfv3NetworkLsaLsid 1.3.6.1.4.1.89.222.2.1.3 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
                 rlOspfv3NetworkLsaRouterId 1.3.6.1.4.1.89.222.2.1.4 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                 rlOspfv3NetworkLsaIdx 1.3.6.1.4.1.89.222.2.1.5 unsigned32 read-only
The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
                 rlOspfv3NetworkLsaCount 1.3.6.1.4.1.89.222.2.1.6 unsigned32 read-only
Number of entries containg is the LSA.
                 rlOspfv3NetworkLsaSequence 1.3.6.1.4.1.89.222.2.1.7 integer32 read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
                 rlOspfv3NetworkLsaAge 1.3.6.1.4.1.89.222.2.1.8 integer32 read-only
This field is the age of the link state advertisement in seconds.
                 rlOspfv3NetworkLsaChecksum 1.3.6.1.4.1.89.222.2.1.9 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
                 rlOspfv3NetworkLsaLength 1.3.6.1.4.1.89.222.2.1.10 unsigned32 read-only
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
                 rlOspfv3NetworkLsaOptions 1.3.6.1.4.1.89.222.2.1.11 unsigned32 read-only
The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain.
                 rlOspfv3NetworkLsaAttRouter 1.3.6.1.4.1.89.222.2.1.12 routerid read-only
The Router IDs of each of the routers attached to the link.
         rlOspfv3InterAreaPrefixLsaTable 1.3.6.1.4.1.89.222.3 no-access
Inter Area Prefix Link State Advertisement.
             rlOspfv3InterAreaPrefixLsaEntry 1.3.6.1.4.1.89.222.3.1 no-access
A single entry from Network LSA.
                 rlOspfv3InterAreaPrefixLsaProcessId 1.3.6.1.4.1.89.222.3.1.1 rlospfprocessid read-only
A 32-bit integer uniquely identifying an OSPFv3 process.
                 rlOspfv3InterAreaPrefixLsaAreaId 1.3.6.1.4.1.89.222.3.1.2 areaid read-only
The 32 bit identifier of the Area from which the LSA was received.
                 rlOspfv3InterAreaPrefixLsaLsid 1.3.6.1.4.1.89.222.3.1.3 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
                 rlOspfv3InterAreaPrefixLsaRouterId 1.3.6.1.4.1.89.222.3.1.4 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                 rlOspfv3InterAreaPrefixLsaSequence 1.3.6.1.4.1.89.222.3.1.5 integer32 read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
                 rlOspfv3InterAreaPrefixLsaAge 1.3.6.1.4.1.89.222.3.1.6 integer32 read-only
This field is the age of the link state advertisement in seconds.
                 rlOspfv3InterAreaPrefixLsaChecksum 1.3.6.1.4.1.89.222.3.1.7 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
                 rlOspfv3InterAreaPrefixLsaLength 1.3.6.1.4.1.89.222.3.1.8 unsigned32 read-only
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
                 rlOspfv3InterAreaPrefixLsaMetric 1.3.6.1.4.1.89.222.3.1.9 unsigned32 read-only
The cost of this route. Expressed in the same units as the interface costs in the router-LSAs.
                 rlOspfv3InterAreaPrefixLsaPrefixLength 1.3.6.1.4.1.89.222.3.1.10 unsigned32 read-only
IPv6 address prefix length.
                 rlOspfv3InterAreaPrefixLsaPrefixOptions 1.3.6.1.4.1.89.222.3.1.11 unsigned32 read-only
IPv6 address prefix options.
                 rlOspfv3InterAreaPrefixLsaAddressPrefix 1.3.6.1.4.1.89.222.3.1.12 inetaddress read-only
IPv6 address prefix - bit strings of length 128.
         rlOspfv3InterAreaRouterLsaTable 1.3.6.1.4.1.89.222.4 no-access
Inter Area Router Link State Advertisement.
             rlOspfv3InterAreaRouterLsaEntry 1.3.6.1.4.1.89.222.4.1 no-access
A single entry from Network LSA.
                 rlOspfv3InterAreaRouterLsaProcessId 1.3.6.1.4.1.89.222.4.1.1 rlospfprocessid read-only
A 32-bit integer uniquely identifying an OSPFv3 process.
                 rlOspfv3InterAreaRouterLsaAreaId 1.3.6.1.4.1.89.222.4.1.2 areaid read-only
The 32 bit identifier of the Area from which the LSA was received.
                 rlOspfv3InterAreaRouterLsaLsid 1.3.6.1.4.1.89.222.4.1.3 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
                 rlOspfv3InterAreaRouterLsaRouterId 1.3.6.1.4.1.89.222.4.1.4 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                 rlOspfv3InterAreaRouterLsaSequence 1.3.6.1.4.1.89.222.4.1.5 integer32 read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
                 rlOspfv3InterAreaRouterLsaAge 1.3.6.1.4.1.89.222.4.1.6 integer32 read-only
This field is the age of the link state advertisement in seconds.
                 rlOspfv3InterAreaRouterLsaChecksum 1.3.6.1.4.1.89.222.4.1.7 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
                 rlOspfv3InterAreaRouterLsaLength 1.3.6.1.4.1.89.222.4.1.8 unsigned32 read-only
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
                 rlOspfv3InterAreaRouterLsaOptions 1.3.6.1.4.1.89.222.4.1.9 unsigned32 read-only
The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain.
                 rlOspfv3InterAreaRouterLsaMetric 1.3.6.1.4.1.89.222.4.1.10 unsigned32 read-only
The cost of this route. Expressed in the same units as the interface costs in the router-LSAs.
                 rlOspfv3InterAreaRouterLsaDestinationRouterId 1.3.6.1.4.1.89.222.4.1.11 routerid read-only
The Router ID of the router being described by the LSA.
         rlOspfv3AsExternalLsaTable 1.3.6.1.4.1.89.222.5 no-access
AS External Link State Advertisement.
             rlOspfv3AsExternalLsaEntry 1.3.6.1.4.1.89.222.5.1 no-access
A single entry from Router LSA.
                 rlOspfv3AsExternalLsaProcessId 1.3.6.1.4.1.89.222.5.1.1 rlospfprocessid read-only
A 32-bit integer uniquely identifying an OSPFv3 process.
                 rlOspfv3AsExternalLsaAreaId 1.3.6.1.4.1.89.222.5.1.2 areaid read-only
The 32 bit identifier of the Area from which the LSA was received.
                 rlOspfv3AsExternalLsaLsid 1.3.6.1.4.1.89.222.5.1.3 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
                 rlOspfv3AsExternalLsaRouterId 1.3.6.1.4.1.89.222.5.1.4 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                 rlOspfv3AsExternalLsaSequence 1.3.6.1.4.1.89.222.5.1.5 integer32 read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
                 rlOspfv3AsExternalLsaAge 1.3.6.1.4.1.89.222.5.1.6 integer32 read-only
This field is the age of the link state advertisement in seconds.
                 rlOspfv3AsExternalLsaChecksum 1.3.6.1.4.1.89.222.5.1.7 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
                 rlOspfv3AsExternalLsaLength 1.3.6.1.4.1.89.222.5.1.8 unsigned32 read-only
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
                 rlOspfv3AsExternalLsaBitE 1.3.6.1.4.1.89.222.5.1.9 integer read-only
The type of external metric. If bit E is set, the metric specified is a Type 2 external metric. Enumeration: 'on': 2, 'off': 1.
                 rlOspfv3AsExternalLsaBitF 1.3.6.1.4.1.89.222.5.1.10 integer read-only
If set, a Forwarding Address has been included in the LSA. Enumeration: 'on': 2, 'off': 1.
                 rlOspfv3AsExternalLsaBitT 1.3.6.1.4.1.89.222.5.1.11 integer read-only
If set, an External Route Tag has been included in the LSA. Enumeration: 'on': 2, 'off': 1.
                 rlOspfv3AsExternalLsaMetric 1.3.6.1.4.1.89.222.5.1.12 unsigned32 read-only
The cost of this route. Interpretation depends on the external type indication (bit E above).
                 rlOspfv3AsExternalLsaReferencedLsType 1.3.6.1.4.1.89.222.5.1.13 unsigned32 read-only
If non-zero, an LSA with this LS type is to be associated with this LSA (see Referenced Link State ID below).
                 rlOspfv3AsExternalLsaPrefixLength 1.3.6.1.4.1.89.222.5.1.14 unsigned32 read-only
IPv6 address prefix length.
                 rlOspfv3AsExternalLsaPrefixOptions 1.3.6.1.4.1.89.222.5.1.15 unsigned32 read-only
IPv6 address prefix options.
                 rlOspfv3AsExternalLsaAddressPrefix 1.3.6.1.4.1.89.222.5.1.16 inetaddress read-only
IPv6 address prefix - bit strings of length 128.
                 rlOspfv3AsExternalLsaForwardingAddress 1.3.6.1.4.1.89.222.5.1.17 inetaddress read-only
A fully qualified IPv6 address (128 bits). Included in the LSA if and only if bit F has been set.
                 rlOspfv3AsExternalLsaExternalRouteTag 1.3.6.1.4.1.89.222.5.1.18 unsigned32 read-only
A 32-bit field which may be used to communicate additional information between AS boundary routers.
                 rlOspfv3AsExternalLsaReferencedLinkStateId 1.3.6.1.4.1.89.222.5.1.19 unsigned32 read-only
Included if and only if Reference LS Type is non-zero.
         rlOspfv3LinkLsaTable 1.3.6.1.4.1.89.222.6 no-access
Link (Type 8) Link State Advertisement.
             rlOspfv3LinkLsaEntry 1.3.6.1.4.1.89.222.6.1 no-access
A single entry from Network LSA.
                 rlOspfv3LinkLsaProcessId 1.3.6.1.4.1.89.222.6.1.1 rlospfprocessid read-only
A 32-bit integer uniquely identifying an OSPFv3 process.
                 rlOspfv3LinkLsaIfIndex 1.3.6.1.4.1.89.222.6.1.2 unsigned32 no-access
The identifier of the link from which the LSA was received.
                 rlOspfv3LinkLsaIfInstId 1.3.6.1.4.1.89.222.6.1.3 integer32 no-access
OSPFv3 protocol instance ID specified in the OSPF header of the packet in which this LSA was received.
                 rlOspfv3LinkLsaLsid 1.3.6.1.4.1.89.222.6.1.4 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
                 rlOspfv3LinkLsaRouterId 1.3.6.1.4.1.89.222.6.1.5 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                 rlOspfv3LinkLsaIdx 1.3.6.1.4.1.89.222.6.1.6 unsigned32 read-only
The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
                 rlOspfv3LinkLsaCount 1.3.6.1.4.1.89.222.6.1.7 unsigned32 read-only
Number of entries containg is the LSA.
                 rlOspfv3LinkLsaSequence 1.3.6.1.4.1.89.222.6.1.8 integer32 read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
                 rlOspfv3LinkLsaAge 1.3.6.1.4.1.89.222.6.1.9 integer32 read-only
This field is the age of the link state advertisement in seconds.
                 rlOspfv3LinkLsaChecksum 1.3.6.1.4.1.89.222.6.1.10 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
                 rlOspfv3LinkLsaLength 1.3.6.1.4.1.89.222.6.1.11 unsigned32 read-only
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
                 rlOspfv3LinkLsaRtrPri 1.3.6.1.4.1.89.222.6.1.12 unsigned32 read-only
The Router Priority of the interface attaching the originating router to the link.
                 rlOspfv3LinkLsaOptions 1.3.6.1.4.1.89.222.6.1.13 unsigned32 read-only
The optional capabilities supported by the router. Through this mechanism routers of differing capabilities can be mixed within an OSPF routing domain.
                 rlOspfv3LinkLsaLinkLocalInterfaceAddress 1.3.6.1.4.1.89.222.6.1.14 inetaddress read-only
Link Local Interface Address. The originating router's link-local interface address on the link.
                 rlOspfv3LinkLsaPrefixLength 1.3.6.1.4.1.89.222.6.1.15 unsigned32 read-only
IPv6 address prefix length.
                 rlOspfv3LinkLsaPrefixOptions 1.3.6.1.4.1.89.222.6.1.16 unsigned32 read-only
IPv6 address prefix options.
                 rlOspfv3LinkLsaAddressPrefix 1.3.6.1.4.1.89.222.6.1.17 inetaddress read-only
IPv6 address prefix - bit strings of length 128.
         rlOspfv3IntraAreaPrefixLsaTable 1.3.6.1.4.1.89.222.7 no-access
Intra Area Prefix Link State Advertisement.
             rlOspfv3IntraAreaPrefixLsaEntry 1.3.6.1.4.1.89.222.7.1 no-access
A single entry from Network LSA.
                 rlOspfv3IntraAreaPrefixLsaProcessId 1.3.6.1.4.1.89.222.7.1.1 rlospfprocessid read-only
A 32-bit integer uniquely identifying an OSPFv3 process.
                 rlOspfv3IntraAreaPrefixLsaAreaId 1.3.6.1.4.1.89.222.7.1.2 areaid read-only
The 32 bit identifier of the Area from which the LSA was received.
                 rlOspfv3IntraAreaPrefixLsaLsid 1.3.6.1.4.1.89.222.7.1.3 ipaddress read-only
The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement.
                 rlOspfv3IntraAreaPrefixLsaRouterId 1.3.6.1.4.1.89.222.7.1.4 routerid read-only
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                 rlOspfv3IntraAreaPrefixLsaIdx 1.3.6.1.4.1.89.222.7.1.5 unsigned32 read-only
The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries.
                 rlOspfv3IntraAreaPrefixLsaCount 1.3.6.1.4.1.89.222.7.1.6 unsigned32 read-only
Number of entries containg is the LSA.
                 rlOspfv3IntraAreaPrefixLsaSequence 1.3.6.1.4.1.89.222.7.1.7 integer32 read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
                 rlOspfv3IntraAreaPrefixLsaAge 1.3.6.1.4.1.89.222.7.1.8 integer32 read-only
This field is the age of the link state advertisement in seconds.
                 rlOspfv3IntraAreaPrefixLsaChecksum 1.3.6.1.4.1.89.222.7.1.9 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
                 rlOspfv3IntraAreaPrefixLsaLength 1.3.6.1.4.1.89.222.7.1.10 unsigned32 read-only
The lenth in bytes of the LSA. This includes the 20 byte LSA header.
                 rlOspfv3IntraAreaPrefixLsaNumPrefixes 1.3.6.1.4.1.89.222.7.1.11 unsigned32 read-only
Number of IPv6 address prefixes contained in the LSA.
                 rlOspfv3IntraAreaPrefixLsaReferenceLsType 1.3.6.1.4.1.89.222.7.1.12 unsigned32 read-only
Referenced LS Type: If the Referenced LS type is 1, the prefixes are associated with a router-LSA. If Referenced LS type is 2, the prefixes are associated with a network-LSA.
                 rlOspfv3IntraAreaPrefixLsaReferenceLsId 1.3.6.1.4.1.89.222.7.1.13 unsigned32 read-only
Referenced Link State ID: If the prefixes are associated with a router-LSA, the Referenced Link State ID should be 0. If the prefixes are associated with a network-LSA, the Referenced Link State ID should be the Interface ID of the link's Designated Router.
                 rlOspfv3IntraAreaPrefixLsaReferenceAdvRouter 1.3.6.1.4.1.89.222.7.1.14 unsigned32 read-only
Referenced Advertising Router: If the prefixes are associated with a router-LSA, the Referenced Advertising Router should be the originating router's Router ID. If the prefixes are associated with a network-LSA, Referenced Advertising Router should be the Designated Router's Router ID.
                 rlOspfv3IntraAreaPrefixLsaMetric 1.3.6.1.4.1.89.222.7.1.15 unsigned32 read-only
The cost of this route. Expressed in the same units as the interface costs in the router-LSAs.
                 rlOspfv3IntraAreaPrefixLsaPrefixLength 1.3.6.1.4.1.89.222.7.1.16 unsigned32 read-only
IPv6 address prefix length.
                 rlOspfv3IntraAreaPrefixLsaPrefixOptions 1.3.6.1.4.1.89.222.7.1.17 unsigned32 read-only
IPv6 address prefix options.
                 rlOspfv3IntraAreaPrefixLsaAddressPrefix 1.3.6.1.4.1.89.222.7.1.18 inetaddress read-only
IPv6 address prefix - bit strings of length 128.