PDN-TRAPMGR-MIB: View SNMP OID List / Download MIB

VENDOR: PARADYNE


 Home MIB: PDN-TRAPMGR-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, PDN-TC, PDN-HEADER-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 devTrapMgrMaxNumber 1.3.6.1.4.1.1795.2.24.2.9.1 integer read-only
Maximum number of managers allowed in the devTrapMgrTable. This may vary per device.
 devTrapMgrCurrentNumber 1.3.6.1.4.1.1795.2.24.2.9.2 integer read-only
Current number of managers in devTrapMgrTable.
 devTrapMgrTable 1.3.6.1.4.1.1795.2.24.2.9.3 no-access
The trap manager table.
     devTrapMgrEntry 1.3.6.1.4.1.1795.2.24.2.9.3.1 no-access
An entry in the trap manager table.
         devTrapMgrIpAddress 1.3.6.1.4.1.1795.2.24.2.9.3.1.1 ipaddress read-write
Unique IP address identifying a Trap Manager. An existing Trap Manager may be deleted by setting the devTrapMgrIpAddress object to 0.0.0.0 or by setting the devTrapMgrIpAddress object to a new address. A new Trap Manager may be added by setting the devTrapMgrIpAddress object of 0.0.0.0 to the new address as long as there is still room for another Trap Manager.
         devTrapMgrDestination 1.3.6.1.4.1.1795.2.24.2.9.3.1.2 integer read-write
The ifIndex to be used with the associated IpAddress when sending traps.
         devTrapMgrCircuit 1.3.6.1.4.1.1795.2.24.2.9.3.1.3 integer read-write
The circuit used for management when multiple circuits are allowed over the specified interface (ifIndex). If the interface allows only one circuit, devTrapMgrCircuit is set to 0.
         devTrapMgrSubCircuit 1.3.6.1.4.1.1795.2.24.2.9.3.1.4 integer read-write
The subcircuit used for management when devTrapMgrCircuit can be further subdivided.
 pdnDevTrapMgrTable 1.3.6.1.4.1.1795.2.24.2.9.4 no-access
The paradyne's device trap manager table.
     pdnDevTrapMgrEntry 1.3.6.1.4.1.1795.2.24.2.9.4.1 no-access
An entry of a trap manager configuration.
         pdnDevTrapMgrDestAddress 1.3.6.1.4.1.1795.2.24.2.9.4.1.1 ipaddress read-only
The IP Address of the destination to which a trap must be sent.
         pdnDevTrapMgrSubnetMask 1.3.6.1.4.1.1795.2.24.2.9.4.1.2 ipaddress read-only
This object is used to specify the subnet mask
         pdnDevTrapMgrDestPort 1.3.6.1.4.1.1795.2.24.2.9.4.1.3 integer read-write
The Port destination used to send the trap.
         pdnDevTrapMgrCommunityName 1.3.6.1.4.1.1795.2.24.2.9.4.1.4 displaystring read-write
This object corresponds to the name of the SNMP Community that will be used when sending the trap out to this manager destination.
         pdnDevTrapMgrEnable 1.3.6.1.4.1.1795.2.24.2.9.4.1.5 integer read-write
This object corresponds to turning traps on/off for a particular destination. enable (1) - traps will be sent to the specified destination. disable (2)- traps will not be sent to the specified destination. Enumeration: 'enable': 1, 'disable': 2.
         pdnDevTrapMgrRowStatus 1.3.6.1.4.1.1795.2.24.2.9.4.1.6 rowstatus read-write
This object is used to add/delete rows to/from the table.
 pdnDevConfigTrapsEnable 1.3.6.1.4.1.1795.2.24.2.9.5 switchstate read-write
This objects allows NMS to turn off/on the generation of Traps in the device.