PDN-ENTITY-REDUNDANCY-MIB: View SNMP OID List / Download MIB

VENDOR: PARADYNE


 Home MIB: PDN-ENTITY-REDUNDANCY-MIB
Download as:   
SNMPv2-CONF, ENTITY-MIB, SNMPv2-SMI, PDN-HEADER-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 pdnEntRedunMIB 1.3.6.1.4.1.1795.2.24.2.41.1
This management information module supports the objects to be used for redundancy of entities.
     pdnEntityRedundancyMIBObjects 1.3.6.1.4.1.1795.2.24.2.41.1.1
         pdnEntityRedundancySelection 1.3.6.1.4.1.1795.2.24.2.41.1.1.1 integer read-write
This object is used to enable or disable the redundancy feature on this device. Enumeration: 'disabled': 2, 'enabled': 1.
         pdnYCableSelection 1.3.6.1.4.1.1795.2.24.2.41.1.1.2 integer read-write
This object is used to configure the Y-cable presence used for tx and rx of data between the redundant units. When the selection is enabled (1), it indicates that the tx and rx signals of each redundant unit are sharing a single common pair to tx and rx data to the network. When the selection is disable (2), it indicates that the tx and rx signals of each redundant unit has a separate (independant) pair to tx and rx data to the network. Enumeration: 'disabled': 2, 'enabled': 1.
         pdnRedunGeneralAlarmStatus 1.3.6.1.4.1.1795.2.24.2.41.1.1.3 pdnredungeneralalarmstatus read-only
This object provides status of any General Alarm detected by the redundancy feature.
         pdnRedunCmdTable 1.3.6.1.4.1.1795.2.24.2.41.1.1.4 no-access
This table contains one row per entity module being used for redundancy.
             pdnRedunCmdEntry 1.3.6.1.4.1.1795.2.24.2.41.1.1.4.1 no-access
Commands that can be performed on a particular entity module used for redundancy.
                 pdnRedunCommand 1.3.6.1.4.1.1795.2.24.2.41.1.1.4.1.1 pdnreduncmd read-write
This object allows users to command an entity module, configured for redundancy to perform an action such as switch (2). Reading this object should return the last command issued on this interface or noCmd (1) if no command has been issued since last reset.
         pdnRedunStatusTable 1.3.6.1.4.1.1795.2.24.2.41.1.1.5 no-access
This table contains configuration and status information related to events in entity modules used for redundancy.
             pdnRedunStatusEntry 1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1 no-access
Configuration and Status information for a particular entity module used for redundancy.
                 pdnRedunEntityState 1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1.1 pdnredunstates read-only
This object is used to display the current state on an entity that is used for redundancy.
                 pdnRedunAlarmStatus 1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1.2 pdnredunalarmstatus read-only
This object provides status of any Alarm detected in a redundant entity.
                 pdnRedunNotificationEnable 1.3.6.1.4.1.1795.2.24.2.41.1.1.5.1.3 pdnredunalarmstatus read-write
This object provides the ability to enable and disable the following notifications: o pdnRedunEventHwIncompatible o pdnRedunEventFwIncompatible o pdnRedunEventCfgIncompatible o pdnRedunEventLinkDefect o pdnRedunEventHwFailure o pdnRedunEventHwMissingHwFailure
         pdnRedunGeneralNotificationEnable 1.3.6.1.4.1.1795.2.24.2.41.1.1.6 pdnredungeneralalarmstatus read-write
This object provides the ability to enable and disable the following general notifications: o pdnRedunEventNoActiveModule o pdnRedunEventStandbyAlarmOrReset
     pdnEntityRedundancyNotifications 1.3.6.1.4.1.1795.2.24.2.41.1.2
         pdnRedunNotificationsPrefix 1.3.6.1.4.1.1795.2.24.2.41.1.2.0
             pdnRedunEventNoActiveModule 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.1
This notification will be issued when no module is in the Active State.
             pdnRedunEventHwIncompatible 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.2
This notification will be issued when the modules in a redundancy configuration present hardware incompatibilities.
             pdnRedunEventStandbyAlarmOrReset 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.3
This notification will be issued when one of the modules configured for redundancy is either in the Standby/Alarm or Reset Test state.
             pdnRedunEventFwIncompatible 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.4
This notification will be issued when the modules in a redundancy configuration present firmware incompatibilities.
             pdnRedunEventCfgIncompatible 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.5
This notification will be issued when the modules in a redundancy configuration present configuration incompatibilities.
             pdnRedunEventLinkDefect 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.6
This notification will be issued when a module in a redundancy configuration has a link condition.
             pdnRedunEventHwFailure 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.7
This notification will be issued when a module in a redundancy configuration has a hardware failure condition.
             pdnRedunEventHwMissingHwFailure 1.3.6.1.4.1.1795.2.24.2.41.1.2.0.8
This notification will be issued when a module in a redundancy configuration is expecting a piece of hw to be used for redundancy which can not be found or is not operational.
     pdnEntityRedundancyConformance 1.3.6.1.4.1.1795.2.24.2.41.1.3
         pdnEntityRedundancyCompliances 1.3.6.1.4.1.1795.2.24.2.41.1.3.1
             pdnEntityRedundancyCompliance 1.3.6.1.4.1.1795.2.24.2.41.1.3.1.1
The compliance statement for SNMP entities which manage the configuration parameters on entities used for redundancy.
         pdnEntityRedundancyGroups 1.3.6.1.4.1.1795.2.24.2.41.1.3.2
             pdnRedundancyGeneralGroup 1.3.6.1.4.1.1795.2.24.2.41.1.3.2.1
A collection of general configuration objects for the entity redundancy implementation.
             pdnEntityRedundancyOptGroup 1.3.6.1.4.1.1795.2.24.2.41.1.3.2.2
A collection of configuration objects applicable to redundancy implementations.
             pdnEntityRedundancyEventGroup 1.3.6.1.4.1.1795.2.24.2.41.1.3.2.3
A collection of redundancy notifications.