PANDATEL-FX-MODEM-MIB: View SNMP OID List / Download MIB

VENDOR: PAN DACOM TELEKOMMUNIKATIONS

Home	MIB: PANDATEL-FX-MODEM-MIB
Download as:		SNMPv2-CONF, SNMPv2-SMI, PANDATEL-MODEM-MIB, SNMPv2-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
fx	1.3.6.1.4.1.760.1.1.2.1.10.502
fxModemTable	1.3.6.1.4.1.760.1.1.2.1.10.502.1		no-access	The table of all FX modems in this housing.
fxTableEntry	1.3.6.1.4.1.760.1.1.2.1.10.502.1.1		no-access	The index of the table.
mdmRack	1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.1	integer	read-only	The index of the rack where the modem is installed.
mdmModem	1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.2	integer	read-only	This variable displays the slot number where the corresponding modem is installed in the rack.
mdmPosition	1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.3	integer	read-only	This variable displays the location of the corresponding modem: 'local' or 'remote'. The modem which is plugged into a managed rack is 'local', the counterpart is 'remote'. Enumeration: 'remote': 2, 'local': 1.
mdmModemName	1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.5	displaystring	read-only	A verbal name of this modem.
mdmRemoteAccessMode	1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.64	integer	read-write	The possibility of remote management: 'enabled' or 'disabled'. Once disabled remote management, it is not possible to enable it at the remote unit. Enumeration: 'enable': 5, 'other': 1, 'disable': 2.
mdmForcedRemoteAccess	1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.65	integer	read-write	Activation of remote management: 'on' or 'off'. Status 'on' enables management of remote unit. During this process the link is restricted to management data. The transmission of user data is interrupted. Status 'off' disables management of remote unit. The link transmits user data. Enumeration: 'on': 2, 'off': 1.
mdmClockRecovery	1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.70	integer	read-write	The clock recovery and data retiming at interface and line port. The remote unit's configuration changes simultaneously. Enumeration: 'not-available': 100, 'stm1-oc3-155mbps': 3, 'other': 1, 'stm4-oc12-622mbps': 4, 'disable': 2.
mdmInterfaceAlarmCondition	1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.98	integer	read-write	The alarm trigger mode at interface port: 'disable', i.e. no alarm is triggered, 'no-link-signal', i.e. an alarm is triggered if the link is down, 'laser-fail', i.e. an alarm is triggered if the laser diode is defective, or 'no-link-signal-or-laser-fail', i.e. the link is down or the laser diode is defective. Enumeration: 'not-available': 100, 'no-link-signal': 3, 'no-link-signal-or-laser-fail': 5, 'disable': 2, 'other': 1, 'laser-fail': 4.
mdmLineAlarmCondition	1.3.6.1.4.1.760.1.1.2.1.10.502.1.1.99	integer	read-write	The alarm trigger mode at line port: 'disable', i.e. no alarm is triggered, 'link-signal', i.e. an alarm is triggered if the link is down, 'laser-fail', i.e. an alarm is triggered if the laser diode is defective, or 'link-signal-or-laser-fail', i.e. the link is down or the laser diode is defective. Enumeration: 'not-available': 100, 'no-link-signal': 3, 'no-link-signal-or-laser-fail': 5, 'disable': 2, 'other': 1, 'laser-fail': 4.
fx_modem	1.3.6.1.4.1.760.1.1.2.1.10.10000.2.502