Nortel-Magellan-Passport-AlarmMIB: View SNMP OID List / Download MIB

VENDOR: NORTHERN TELECOM


 Home MIB: Nortel-Magellan-Passport-AlarmMIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
     alarmTrap 1.3.6.1.4.1.562.2.4.1.3.2
         mandatoryAlarmInfo 1.3.6.1.4.1.562.2.4.1.3.2.7
             componentRowPointer 1.3.6.1.4.1.562.2.4.1.3.2.7.1 rowpointer no-access
A pointer to the RowStatus variable of the component emitting the alarm.
             componentName 1.3.6.1.4.1.562.2.4.1.3.2.7.2 displaystring no-access
The textual name of the component emitting the alarm in a format suitable for use in commands entered on the `console'. It includes the name of the node from which the alarm was sent, as specified in `ModuleData nodeName'.
             eventTime 1.3.6.1.4.1.562.2.4.1.3.2.7.3 dateandtime no-access
The date and time at which the alarmed event occurred.
             activeListStatus 1.3.6.1.4.1.562.2.4.1.3.2.7.4 integer no-access
The active alarm list status. This may be used by the Manager to add (on receiving a set) and delete (on receiving a clear) alarms from the alarm displays. Enumeration: 'message': 0, 'set': 1, 'clear': 2.
             severity 1.3.6.1.4.1.562.2.4.1.3.2.7.5 integer no-access
The severity of the alarm which should indicate what priority that fixing this problem should be given. All values are OSI-defined; refer to CCITT X.733/ISO 10164-4 for a more complete description. Enumeration: 'major': 2, 'indeterminate': 0, 'warning': 4, 'critical': 1, 'cleared': 5, 'minor': 3.
             alarmType 1.3.6.1.4.1.562.2.4.1.3.2.7.6 integer no-access
The alarm type field as defined by OSI which is used to indicate a broad category of what is wrong. The first 6 values are OSI-defined; refer to CCITT X.733/ISO 10164-4 (for the first 5) and CCITT X.736/ISO 10164-4 (for the last) for a more complete description. The value 'operator' is used when an alarm is issued due to an operator command. The values 'debug' and 'unknown' are for compatibility with older switches and are used for debugging alarms and for those which do not fit any of the above, respectively. Enumeration: 'equipment': 3, 'environmental': 4, 'debug': 7, 'processing': 2, 'qualityOfService': 1, 'communications': 0, 'unknown': 8, 'operator': 6, 'security': 5.
             probableCause 1.3.6.1.4.1.562.2.4.1.3.2.7.7 integer no-access
The probable cause for the alarm which usually qualifies the Alarm Type field. Most values are OSI-defined; refer refer to CCITT X.733 and X.736 (ISO 10164-4 and 10164-7) for a more complete description. Enumeration: 'applicationSubsystemFailure': 50, 'debugging': 201, 'localTransmissionError': 3, 'lossOfSignal': 0, 'congestion': 26, 'commSubsystemFailure': 7, 'equipmentFailure': 70, 'delayedInfo': 120, 'softwareProgramTermination': 46, 'softwareProgramError': 45, 'softwareError': 44, 'fileError': 47, 'nonRepudiationFailure': 112, 'networkServerIntervention': 204, 'timingProblem': 61, 'outputDeviceError': 67, 'transmitterFailure': 66, 'remoteTransmissionError': 4, 'unknown': 202, 'breachOfConfidence': 111, 'unexpectedInfo': 84, 'ioDeviceError': 69, 'authenticationFailure': 110, 'lanError': 9, 'degradedSignal': 6, 'intrusionDetection': 101, 'keyExpired': 121, 'underlyingResourceUnavail': 49, 'retransmissionRateReduced': 23, 'queueSizeExceeded': 21, 'multiplexorProblem': 64, 'receiverFailure': 65, 'lossOfFrame': 1, 'otherSecurityService': 114, 'versionMismatch': 41, 'infoModification': 82, 'infoOutOfSequence': 83, 'cableTamper': 100, 'outOfHoursActivity': 122, 'inputDeviceError': 68, 'proceduralError': 92, 'cpuCyclesLimitExceeded': 43, 'responseTimeExcessive': 20, 'callEstablishmentError': 5, 'thresholdCrossed': 24, 'configurationError': 51, 'commProtocolError': 8, 'storageCapacityProblem': 40, 'performanceDegraded': 25, 'framingError': 2, 'atOrNearCapacity': 27, 'outOfService': 91, 'outOfMemory': 48, 'powerProblem': 60, 'adapterError': 71, 'otherPhysical': 102, 'dteDceInterfaceError': 10, 'bandwidthReduced': 22, 'denialOfService': 90, 'otherOperational': 93, 'datasetModemError': 63, 'corruptData': 42, 'operationalCondition': 200, 'processorProblem': 62, 'infoMissing': 81, 'unauthorizedAccess': 113, 'duplicateInfo': 80, 'inactiveVirtualCircuit': 203.
             ntpIndex 1.3.6.1.4.1.562.2.4.1.3.2.7.8 digitstring no-access
An 8-digit code which is an index into an NTP to provide more description of the alarm and possible actions to take. The first 4 digits indicate a 'group' of alarms (belonging to a particular subsystem or component, etc.). The last 4 digits are a subindex arbitrarily assigned by the application which is responsible for them.
             commentData 1.3.6.1.4.1.562.2.4.1.3.2.7.9 asciistring no-access
Additional textual information for the network operator to use. It contains only ASCII characters. Note: The total number of bytes in commentData, operatorData, and internalData may not exceed 750 bytes.
         optionalAlarmInfo 1.3.6.1.4.1.562.2.4.1.3.2.8
             notificationID 1.3.6.1.4.1.562.2.4.1.3.2.8.1 hex no-access
The notification Id of the alarm. The high-order byte is the card number of the card from which this alarm originated. The low-order 24 bits contain a sequence number which increases each time an alarm is generated. Thus, this id provides a simple way of uniquely identifying an alarm as well as the order in which alarms are generated on a card. For cross-card ordering, one would have to look at the time stamp (see dateAndTime).
             lpForHierClear 1.3.6.1.4.1.562.2.4.1.3.2.8.2 rowpointer no-access
A pointer to the RowStatus variable of the Logical Processor the component generating the alarm is running on. A component generating an Alarm with `activeListStatus = set' can include this variable in the Alarm. If the identified Logical Processor generates a Hierarchical Clear Alarm, then it will clear the Set Alarm.
             operatorData 1.3.6.1.4.1.562.2.4.1.3.2.8.3 hexstring no-access
Additional hexadecimal information for the network operator to use. Note: The total number of bytes in commentData, operatorData, and internalData may not exceed 750 bytes.
             pid 1.3.6.1.4.1.562.2.4.1.3.2.8.4 displaystring no-access
A string representation of the internal process id (Pid) of the process which generated the alarm (for internal use only). Note that it may or may not map to the componentName field.
             fileName 1.3.6.1.4.1.562.2.4.1.3.2.8.5 displaystring no-access
An internal filename (for internal use only).
             fileLineNumber 1.3.6.1.4.1.562.2.4.1.3.2.8.6 unsigned32 no-access
An internal line number in the file (see filename) referred to above (for internal use only).
             fileVersion 1.3.6.1.4.1.562.2.4.1.3.2.8.7 displaystring no-access
A version indicator of the file (filename) referred to above (for internal use only).
             internalData 1.3.6.1.4.1.562.2.4.1.3.2.8.8 hexstring no-access
An additional internal hexadecimal information for internal use only. Note: The total number of bytes in comment, operator, and internal data may not exceed 750 bytes.
         provisionalAlarmInfo 1.3.6.1.4.1.562.2.4.1.3.2.9
             cid 1.3.6.1.4.1.562.2.4.1.3.2.9.1 unsigned32 no-access
This is a Custom Identifier(CID) of the component which generated the alarm
           criticalAlarm 1.3.6.1.4.1.562.2.4.1.3.20.1
This trap is used to provide a real time indication of a critical Alarm condition. The variables listed in the VARIABLES clause, defined in the `mandatoryAlarmInfo' group are present in all critical alarms. Additional variables as defined in the 'optionalAlarmInfo' group may be included if appropriate.
           majorAlarm 1.3.6.1.4.1.562.2.4.1.3.20.2
This trap is used to provide a real time indication of a major Alarm condition. The variables listed in the VARIABLES clause, defined in the `mandatoryAlarmInfo' group are present in all major alarms. Additional variables as defined in the 'optionalAlarmInfo' group may be included if appropriate.
           minorAlarm 1.3.6.1.4.1.562.2.4.1.3.20.3
This trap is used to provide a real time indication of a minor Alarm condition. The variables listed in the VARIABLES clause, defined in the `mandatoryAlarmInfo' group are present in all minor alarms. Additional variables as defined in the 'optionalAlarmInfo' group may be included if appropriate.
           warningAlarm 1.3.6.1.4.1.562.2.4.1.3.20.4
This trap is used to provide a real time indication of a warning Alarm condition. The variables listed in the VARIABLES clause, defined in the `mandatoryAlarmInfo' group are present in all warning alarms. Additional variables as defined in the 'optionalAlarmInfo' group may be included if appropriate.
           clearedAlarm 1.3.6.1.4.1.562.2.4.1.3.20.5
This trap is used to provide a real time indication of a cleared Alarm. The variables listed in the VARIABLES clause, defined in the `mandatoryAlarmInfo' group are present in all cleared alarms. Additional variables as defined in the 'optionalAlarmInfo' group may be included if appropriate.
           indeterminateAlarm 1.3.6.1.4.1.562.2.4.1.3.20.6
This trap is used to provide a real time indication of an indeterminate Alarm condition. The variables listed in the VARIABLES clause, defined in the `mandatoryAlarmInfo' group are present in all indeterminate alarms. Additional variables as defined in the 'optionalAlarmInfo' group may be included if appropriate.
 alarmMIB 1.3.6.1.4.1.562.2.4.2.4
     alarmGroup 1.3.6.1.4.1.562.2.4.2.4.1
         alarmGroupBC 1.3.6.1.4.1.562.2.4.2.4.1.3
             alarmGroupBC02 1.3.6.1.4.1.562.2.4.2.4.1.3.2
                 alarmGroupBC02A 1.3.6.1.4.1.562.2.4.2.4.1.3.2.2
     alarmNotifications 1.3.6.1.4.1.562.2.4.2.4.2
         alarmNotificationsGroupBC02A 1.3.6.1.4.1.562.2.4.2.4.2.1
     alarmCapabilities 1.3.6.1.4.1.562.2.4.2.4.3
         alarmCapabilitiesBC 1.3.6.1.4.1.562.2.4.2.4.3.3
             alarmCapabilitiesBC02 1.3.6.1.4.1.562.2.4.2.4.3.3.2
                 alarmCapabilitiesBC02A 1.3.6.1.4.1.562.2.4.2.4.3.3.2.2