NSCRTV-EPON-IGMP-MGM-MIB: View SNMP OID List / Download MIB

VENDOR: NATIONAL STANDARDIZATION COMMITTEE OF RADIO AND TV


 Home MIB: NSCRTV-EPON-IGMP-MGM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, NSCRTV-EPONEOC-EPON-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 igmpEntityTable 1.3.6.1.4.1.17409.2.3.6.1 no-access
     igmpEntityEntry 1.3.6.1.4.1.17409.2.3.6.1.1 no-access
         igmpDeviceIndex 1.3.6.1.4.1.17409.2.3.6.1.1.1 integer no-access
For OLT, set to corresponding device For ONU, set to 0
         igmpMode 1.3.6.1.4.1.17409.2.3.6.1.1.2 integer read-write
centralized(1) - All the multicast control is done by OLT distributedwithcm(2) - Both OLT and ONU perform IGMP proxy and controlled multicast will be enabled. At this case, if igmp joins shall follow the definition in multicastPackageList, for the port disabled(3) - Disable IGMP proxy on OLT and ONU distributedwocm(4) - Both OLT and ONU perform IGMP proxy and controlled multicast will be disabled. At this case, if igmp joins shall be accept even violate the definition in multicastPackageList, for the port. Enumeration: 'disabled': 3, 'distributedwithcm': 2, 'distributedwocm': 4, 'centralized': 1.
         maxQueryResponseTime 1.3.6.1.4.1.17409.2.3.6.1.1.3 integer read-write
This is used for sending general query
         robustVariable 1.3.6.1.4.1.17409.2.3.6.1.1.4 integer read-write
This is used for sending general query No less than 1
         queryInterval 1.3.6.1.4.1.17409.2.3.6.1.1.5 integer read-write
This is used for sending general query
         lastMemberQueryInterval 1.3.6.1.4.1.17409.2.3.6.1.1.6 integer read-write
Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages
         lastMemberQueryCount 1.3.6.1.4.1.17409.2.3.6.1.1.7 integer read-write
Number of Group-Specific Queries sent before the router assumes there are no local members
         igmpVersion 1.3.6.1.4.1.17409.2.3.6.1.1.8 integer read-write
Enumeration: 'v1': 1, 'v2': 2, 'v3': 3.
 igmpProxyParaTable 1.3.6.1.4.1.17409.2.3.6.2 no-access
IGMP -
     igmpProxyParaEntry 1.3.6.1.4.1.17409.2.3.6.2.1 no-access
         proxyIndex 1.3.6.1.4.1.17409.2.3.6.2.1.1 integer no-access
IGMP -
         proxyName 1.3.6.1.4.1.17409.2.3.6.2.1.2 octet string read-only
IGMP
         proxySrcIPAddress 1.3.6.1.4.1.17409.2.3.6.2.1.3 ipaddress read-only
         proxyMulticastVID 1.3.6.1.4.1.17409.2.3.6.2.1.4 integer read-only
IGMP :
         proxyMulticastIPAddress 1.3.6.1.4.1.17409.2.3.6.2.1.5 ipaddress read-only
         multicastAssuredBW 1.3.6.1.4.1.17409.2.3.6.2.1.6 unsigned32 read-only
:kbps
         multicastMaxBW 1.3.6.1.4.1.17409.2.3.6.2.1.7 unsigned32 read-only
:kbps
         proxyRowStatus 1.3.6.1.4.1.17409.2.3.6.2.1.8 rowstatus read-only
 igmpForwardingTable 1.3.6.1.4.1.17409.2.3.6.3 no-access
Multicast forwarding table
     igmpForwardingEntry 1.3.6.1.4.1.17409.2.3.6.3.1 no-access
         groupDeviceIndex 1.3.6.1.4.1.17409.2.3.6.3.1.1 integer no-access
For OLT, set to corresponding OLT device For ONU, set to 0
         groupVlanIndex 1.3.6.1.4.1.17409.2.3.6.3.1.2 integer no-access
         groupMacAddress 1.3.6.1.4.1.17409.2.3.6.3.1.3 macaddress no-access
         groupPortList 1.3.6.1.4.1.17409.2.3.6.3.1.4 octet string read-only
Forwarding port list 1. OLT ------------------------------------------------------------------- It is presented by member port list. Each member port is identified by 4-byte format, same as TC of EponDeviceIndex. The actual length of this string depends of the number of member ports in the port list. The relationship is: Length of the string = 4 * (NUM of member ports) For example, if device 1, port 1/2 and 2/3 is the member ports, then this object will be presented as: 01 01 02 00 01 02 03 00 2. ONU ------------------------------------------------------------------- It is presented by member port list. Each member port is identified by 2-byte format, One for slot ID, the last for port ID. The actual length of this string depends of the number of member ports. If the ONU is fixed (not modulized), set slot ID to 0, the NMS could ignore the slot info. Note that, slot here shall follow the last byte definition of EponCardIndex to indicate the main-slot and sub-slot index. The relationship is: Length of the string = 2 * (NUM of member ports) For example, if port 1/2 and 3/4 is the member ports of the group, then the object is presented as: 01 02 03 04
 controllededMulticastTable 1.3.6.1.4.1.17409.2.3.6.4
     controlledMulticastUserAuthorityTable 1.3.6.1.4.1.17409.2.3.6.4.1 no-access
         controlledMulticastUserAuthorityEntry 1.3.6.1.4.1.17409.2.3.6.4.1.1 no-access
             cmDeviceIndex 1.3.6.1.4.1.17409.2.3.6.4.1.1.1 epondeviceindex no-access
For OLT, set to corresponding device/slot/port/ONU For ONU, set to 0
             cmCardIndex 1.3.6.1.4.1.17409.2.3.6.4.1.1.2 eponcardindex no-access
Set to corresponding UNI slot
             cmPortIndex 1.3.6.1.4.1.17409.2.3.6.4.1.1.3 eponportindex no-access
Port ID Set to corresponding UNI port
             multicastPackageList 1.3.6.1.4.1.17409.2.3.6.4.1.1.4 octet string read-only
. ,
             igmpGlobalBW 1.3.6.1.4.1.17409.2.3.6.4.1.1.5 unsigned32 read-only
- :kbps
             igmpGlobalBWUsed 1.3.6.1.4.1.17409.2.3.6.4.1.1.6 unsigned32 read-only
- :kbps
             cmUserAuthorityRowStatus 1.3.6.1.4.1.17409.2.3.6.4.1.1.7 rowstatus read-only
     controlledMulticastPackageTable 1.3.6.1.4.1.17409.2.3.6.4.2 no-access
         controlledMulticastPackageEntry 1.3.6.1.4.1.17409.2.3.6.4.2.1 no-access
             cmIndex 1.3.6.1.4.1.17409.2.3.6.4.2.1.1 integer no-access
             cmName 1.3.6.1.4.1.17409.2.3.6.4.2.1.2 octet string read-only
             cmProxyList 1.3.6.1.4.1.17409.2.3.6.4.2.1.3 octet string read-only
             multicastUserAuthority 1.3.6.1.4.1.17409.2.3.6.4.2.1.4 integer read-only
Enumeration: 'deny': 3, 'preview': 2, 'permit': 1.
             maxRequestChannelNum 1.3.6.1.4.1.17409.2.3.6.4.2.1.5 integer read-only
             singlePreviewTime 1.3.6.1.4.1.17409.2.3.6.4.2.1.6 integer read-only
             totalPreviewTime 1.3.6.1.4.1.17409.2.3.6.4.2.1.7 integer read-only
             previewResetTime 1.3.6.1.4.1.17409.2.3.6.4.2.1.8 integer read-only
             previewCount 1.3.6.1.4.1.17409.2.3.6.4.2.1.9 integer read-only
             cmRowStatus 1.3.6.1.4.1.17409.2.3.6.4.2.1.10 rowstatus read-only
 igmpOnuUniTable 1.3.6.1.4.1.17409.2.3.6.5 no-access
A list of igmpOnuUniTable entries.
     igmpOnuUniEntry 1.3.6.1.4.1.17409.2.3.6.5.1 no-access
The igmpOnuUniEntry Information
         uniMvlanDeviceIndex 1.3.6.1.4.1.17409.2.3.6.5.1.1 epondeviceindex no-access
         uniMvlanCardIndex 1.3.6.1.4.1.17409.2.3.6.5.1.2 eponcardindex no-access
         uniMvlanPortIndex 1.3.6.1.4.1.17409.2.3.6.5.1.3 eponportindex no-access
         uniMvlanVid 1.3.6.1.4.1.17409.2.3.6.5.1.4 octet string read-only
         uniMaxMultiNum 1.3.6.1.4.1.17409.2.3.6.5.1.5 integer read-only
         uniMvlanTag 1.3.6.1.4.1.17409.2.3.6.5.1.6 integer read-only
         uniMvlanRowstatus 1.3.6.1.4.1.17409.2.3.6.5.1.7 integer read-only