NBS-SIGLANE-MIB: View SNMP OID List / Download MIB

VENDOR: NBASE SWITCH COMMUNICATION


 Home MIB: NBS-SIGLANE-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, NBS-MIB, NBS-CMMCENUM-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 nbsSigLaneMib 1.3.6.1.4.1.629.236
Signaling Lane mib - objects for the management of multi-lane ports such as QSFP, CXP, and CFP.
         nbsSigLanePortGrp 1.3.6.1.4.1.629.236.10
Ports which aggregate multiple signaling lanes
               nbsSigLanePortTable 1.3.6.1.4.1.629.236.10.1 no-access
A table that describes signaling lanes for a QSFP[+] or CFP port.
                   nbsSigLanePortEntry 1.3.6.1.4.1.629.236.10.1.1 no-access
Contains a description of a particular port signaling lane.
                       nbsSigLanePortIfIndex 1.3.6.1.4.1.629.236.10.1.1.1 interfaceindex read-only
The index to the MIB-II Interface table entry which represents this port. This value should be 0 if there is no corresponding MIB-II interface entry.
                       nbsSigLanePortFacility 1.3.6.1.4.1.629.236.10.1.1.10 integer read-only
fiber(2) indicates that lane signaling is conducted on separate fibers. lambda(3) indicates that lane signaling is conducted on different wavelengths on a single SMF fiber. Enumeration: 'other': 1, 'fiber': 2, 'lambda': 3.
                       nbsSigLanePortLanes 1.3.6.1.4.1.629.236.10.1.1.20 integer read-only
The number of signaling lanes in this port
         nbsSigLaneLaneGrp 1.3.6.1.4.1.629.236.20
Individual signaling lanes within a port
               nbsSigLaneLaneTable 1.3.6.1.4.1.629.236.20.1 no-access
A table that describes (fiber/lambda) network signaling lanes for a multi-lane port.
                   nbsSigLaneLaneEntry 1.3.6.1.4.1.629.236.20.1.1 no-access
Contains a description of a particular (fiber/lambda) signaling lane.
                       nbsSigLaneLaneIfIndex 1.3.6.1.4.1.629.236.20.1.1.1 interfaceindex read-only
The index to the MIB-II Interface table entry which contains this (fiber/lambda) lane.
                       nbsSigLaneLaneIndex 1.3.6.1.4.1.629.236.20.1.1.2 integer read-only
Ordinal index for the signaling lane in a port: 1..4 for QSFP[+] 4 x 10G 1..4 for CFP 4 x 25G 1..4 for CFP 4 x 28G 1..10 for CFP 10 x 10G
                       nbsSigLaneLaneFrequency 1.3.6.1.4.1.629.236.20.1.1.10 nbstcmhz read-only
The nominal frequency, in MHz.
                       nbsSigLaneLaneWavelengthX 1.3.6.1.4.1.629.236.20.1.1.11 displaystring read-only
The nominal wavelength (nanometers) is an ASCII string to be human-readable. CWDM wavelengths use 4 digits. DWDM wavelengths use seven digits and a decimal point. Not supported value: 'N/A'
                       nbsSigLaneLaneChannelBand 1.3.6.1.4.1.629.236.20.1.1.12 nbscmmcchannelband read-only
The ITU grid labels DWDM channels with a letter 'band' and a numeric channel. Within this mib, the band is indicated by this object, and the channel number is shown in the object nbsOsaChannelNumber. Frequencies of at least 180100 GHz but less than 190100 GHz are considered the L spectrum, and frequencies of at least 190100 but less than 200100 GHz are considered the C spectrum. Frequencies evenly divisible by 100 GHz are designated with a 'C' or 'L' prepended to the channel number. Frequencies that are offset by 50 GHz are designated 'H' within the C spectrum, and 'Q' within the L spectrum.
                       nbsSigLaneLaneChannelNumber 1.3.6.1.4.1.629.236.20.1.1.13 integer read-only
The channel number can be derived by extracting the two middle digits from the six digit frequency in GHz.
                       nbsSigLaneLaneTxPowerLevel 1.3.6.1.4.1.629.236.20.1.1.20 integer read-only
This object indicates the status of this lane's measured received power, reported in nbsSigLaneLaneTxPower: notSupported(1), if (nbsSigLaneLaneTxPower = 0x80000000); lowAlarm(2), if nbsSigLaneLaneTxPower < nbsSigLanePortTxPowerVendorMin; lowWarning(3), if nbsSigLaneLaneTxPower > nbsSigLanePortTxPowerVendorMin and nbsSigLaneLaneTxPower < nbsSigLanePortTxPowerUserMin; ok(4), if nbsSigLaneLaneTxPower is within thresholds; highWarning(5), if nbsSigLaneLaneTxPower < nbsSigLanePortTxPowerVendorMax and nbsSigLaneLaneTxPower > nbsSigLanePortTxPowerUserMax; highAlarm(6), if nbsSigLaneLaneTxPower > nbsSigLanePortTxPowerVendorMax Enumeration: 'lowWarning': 3, 'highAlarm': 6, 'ok': 4, 'highWarning': 5, 'lowAlarm': 2, 'notSupported': 1.
                       nbsSigLaneLaneTxPower 1.3.6.1.4.1.629.236.20.1.1.21 nbstcmillidb read-only
The output power (in milli dBm) of this lane. Not supported value: 0x80000000
                       nbsSigLaneLaneRxPowerLevel 1.3.6.1.4.1.629.236.20.1.1.30 integer read-only
This object indicates the status of this lane's measured received power, reported in nbsSigLaneLaneRxPower: notSupported(1), if (nbsSigLaneLaneRxPower = 0x80000000); lowAlarm(2), if nbsSigLaneLaneRxPower < nbsSigLanePortRxPowerVendorMin; lowWarning(3), if nbsSigLaneLaneRxPower > nbsSigLanePortRxPowerVendorMin and nbsSigLaneLaneRxPower < nbsSigLanePortRxPowerUserMin; ok(4), if nbsSigLaneLaneRxPower is within thresholds; highWarning(5), if nbsSigLaneLaneRxPower < nbsSigLanePortRxPowerVendorMax and nbsSigLaneLaneRxPower > nbsSigLanePortRxPowerUserMax; highAlarm(6), if nbsSigLaneLaneRxPower > nbsSigLanePortRxPowerVendorMax Enumeration: 'lowWarning': 3, 'highAlarm': 6, 'ok': 4, 'highWarning': 5, 'lowAlarm': 2, 'notSupported': 1.
                       nbsSigLaneLaneRxPower 1.3.6.1.4.1.629.236.20.1.1.31 nbstcmillidb read-only
The received optical power (in milli dBm) of this lane. Not supported value: 0x80000000
                       nbsSigLaneLaneBiasAmpsLevel 1.3.6.1.4.1.629.236.20.1.1.40 integer read-only
This object indicates the status of laser bias current, as reported in nbsSigLaneLaneBiasAmps: notSupported(1), if (nbsSigLaneLaneBiasAmps = -1); lowAlarm(2), if below nbsSigLanePortBiasAmpsVendorMin; ok(4), if within the recommended operating range; highAlarm(6), if above nbsSigLanePortBiasAmpsVendorMax. Enumeration: 'lowWarning': 3, 'highAlarm': 6, 'ok': 4, 'highWarning': 5, 'lowAlarm': 2, 'notSupported': 1.
                       nbsSigLaneLaneBiasAmps 1.3.6.1.4.1.629.236.20.1.1.41 nbstcmicroamp read-only
The bias current (in microAmps) of this lane. Not supported value: -1
                       nbsSigLaneLaneLaserTempLevel 1.3.6.1.4.1.629.236.20.1.1.50 integer read-only
This object indicates the status of laser temperature, as reported in nbsSigLaneLaneLaserTemp: notSupported(1), if (nbsSigLaneLaneLaserTemp = 0x80000000); lowAlarm(2), if below nbsSigLanePortLaserTempVendorMin; ok(4), if within the recommended operating range; highAlarm(6), if above nbsSigLanePortLaserTempVendorMax. Enumeration: 'lowWarning': 3, 'highAlarm': 6, 'ok': 4, 'highWarning': 5, 'lowAlarm': 2, 'notSupported': 1.
                       nbsSigLaneLaneLaserTemp 1.3.6.1.4.1.629.236.20.1.1.51 nbstctemperature read-only
The temperature (in degrees Celsius) of this lane. Not supported value: 0x80000000
         nbsSigLaneTraps 1.3.6.1.4.1.629.236.100
OBJECT-TYPE macros to be used in SNMP NOTIFICATION macros
                 nbsSigLaneTraps0 1.3.6.1.4.1.629.236.100.0
NOTIFICATION-TYPE macros