Modem-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: Modem-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mdmMib 1.3.6.1.2.1.38
       mdmMIB 1.3.6.1.2.1.38.1
The MIB module for management of dial-up modems.
           mdmMIBObjects 1.3.6.1.2.1.38.1.1
               mdmNumber 1.3.6.1.2.1.38.1.1.1 integer32 read-only
The number of modem rows in the modem table. This value defines the maximum value of the mdmIndex object.
               mdmIDTable 1.3.6.1.2.1.38.1.1.2 no-access
The base table for the modems managed by this MIB. The mdmLineTable, mdmDTEInterfaceTable, mdmCallControlTable, and mdmStatsTable all augment the rows defined in this table.
                   mdmIDEntry 1.3.6.1.2.1.38.1.1.2.1 no-access
Entries in this table are created only by the agent. One entry exists for each modem managed by the agent.
                       mdmIndex 1.3.6.1.2.1.38.1.1.2.1.1 integer32 no-access
A unique number for each modem that ranges from 1 to mdmNumber. The value must remain constant at least from one re-initialization of the network management agent to the next.
                       mdmIDManufacturerOID 1.3.6.1.2.1.38.1.1.2.1.2 object identifier read-only
This value is intended to identify the manufacturer, model, and version of this modem. This may be used to identify the existance of enterprise-specific functions and behaviours.
                       mdmIDProductDetails 1.3.6.1.2.1.38.1.1.2.1.3 displaystring read-only
A textual description of this device, including the manufacturer's name, modem model name, hardware revision, firmware revision, and optionally, its serial number. The exact format of this description is defined by the vendor. This description may only contain characters from the NVT ASCII character set.
               mdmLineTable 1.3.6.1.2.1.38.1.1.3 no-access
The modem Line Table augments the modem ID table.
                   mdmLineEntry 1.3.6.1.2.1.38.1.1.3.1 no-access
Entries in this table are created only by the agent. One entry exists for each modem managed by the agent.
                       mdmLineCarrierLossTime 1.3.6.1.2.1.38.1.1.3.1.1 integer32 read-write
Duration in 10ths of a second the modem waits after loss of carrier before hanging up. If this value is set to `255', the modem will not hang up upon loss of carrier. This allows the modem to distinguish between a momentary lapse in line quality and a true disconnect and can be useful to tune the tolerance of the modem to lines of poor quality.
                       mdmLineState 1.3.6.1.2.1.38.1.1.3.1.2 integer read-write
Allows the inspection and alteration of the state of the modem. Management commands may change the state to `on- hook', `busied-out', or `reset' from any state. No other alterations are permitted from the management protocol. When this object is set to reset, the modem shall be reset and the value will change to the modem's new, implementation dependent state. Enumeration: 'reset': 6, 'unknown': 1, 'onHook': 2, 'connected': 4, 'busiedOut': 5, 'offHook': 3.
               mdmLineCapabilitiesTable 1.3.6.1.2.1.38.1.1.4 no-access
A list of protocol capabilities for this modem.
                   mdmLineCapabilitiesEntry 1.3.6.1.2.1.38.1.1.4.1 no-access
A listing of the protocol(s) that this modem is capable of. Entries in this table are created only by the agent. One entry exists for each protocol that the modem is capable of, regardless of whether that protocol is enabled or not. This table is useful for providing an inventory of the capabilities on a modem, and allowing the manager to enable or disable capabilities from the menu of available possibilities. Row creation is not required to enable or disable capabilities.
                       mdmLineCapabilitiesIndex 1.3.6.1.2.1.38.1.1.4.1.1 integer32 no-access
A unique index for this capabilities entry.
                       mdmLineCapabilitiesID 1.3.6.1.2.1.38.1.1.4.1.2 object identifier read-only
An identifier for this capability. Standard protocol capabilities will have identifiers registered in this document or other companion standards documents. Proprietary protocol capabilities will be registered by their respective organization. All capabilities, standard or vendor-specific, shall be registered in this table.
                       mdmLineCapabilitiesEnableRequested 1.3.6.1.2.1.38.1.1.4.1.3 integer read-write
The requested configuration of this capability. If this value is 'disabled(1)', this is a request to disable this protocol. If this value is 'preferred(3)', this is a request to enable this protocol, and to prefer it in any negotiation over other appropriate protocols that have a value of 'optional(2)'. Enumeration: 'disabled': 1, 'optional': 2, 'preferred': 3.
                       mdmLineCapabilitiesEnableGranted 1.3.6.1.2.1.38.1.1.4.1.4 integer read-only
The actual configuration of this capability. The agent shall attempt to set this as close as possible to the associated mdmLineCapabilitiesEnableRequested value. The agent shall make this determination in an implementation- specific manner that may take into account the configuration of other capabilities or other considerations. The modem will choose in an implementation-specific manner between multiple mutually-exclusive capabilities that each have the same (non-disabled) value. However, the modem must prefer all capabilities with a value of 'preferred(3)' over all capabilities with a value of 'optional(2)'. In other words, if there are one or more mutually-exclusive capabilities (e.g. V.32 and V.32bis) that are set to `preferred', the agent must choose one in an implementation-specific manner. Otherwise, if there are one or more mutually-exclusive capabilities that are set to `optional', the agent must choose one in an implementation- specific manner. Enumeration: 'disabled': 1, 'optional': 2, 'preferred': 3.
               mdmLineCapabilities 1.3.6.1.2.1.38.1.1.5
                   mdmLineCapabilitiesV21 1.3.6.1.2.1.38.1.1.5.1
ITU V.21
                   mdmLineCapabilitiesV22 1.3.6.1.2.1.38.1.1.5.2
ITU V.22
                   mdmLineCapabilitiesV22bis 1.3.6.1.2.1.38.1.1.5.3
ITU V.22bis
                   mdmLineCapabilitiesV23CC 1.3.6.1.2.1.38.1.1.5.4
ITU V.23CC
                   mdmLineCapabilitiesV23SC 1.3.6.1.2.1.38.1.1.5.5
ITU V.23SC
                   mdmLineCapabilitiesV25bis 1.3.6.1.2.1.38.1.1.5.6
ITU V.25bis
                   mdmLineCapabilitiesV26bis 1.3.6.1.2.1.38.1.1.5.7
ITU V.26bis
                   mdmLineCapabilitiesV26ter 1.3.6.1.2.1.38.1.1.5.8
ITU V.26ter
                   mdmLineCapabilitiesV27ter 1.3.6.1.2.1.38.1.1.5.9
ITU V.27ter
                   mdmLineCapabilitiesV32 1.3.6.1.2.1.38.1.1.5.10
ITU V.32
                   mdmLineCapabilitiesV32bis 1.3.6.1.2.1.38.1.1.5.11
ITU V.32bis
                   mdmLineCapabilitiesV32terbo 1.3.6.1.2.1.38.1.1.5.12
ITU V.32terbo
                   mdmLineCapabilitiesVFC 1.3.6.1.2.1.38.1.1.5.13
ITU V.FC
                   mdmLineCapabilitiesV34 1.3.6.1.2.1.38.1.1.5.14
ITU V.34
                   mdmLineCapabilitiesV42 1.3.6.1.2.1.38.1.1.5.15
ITU V.42
                   mdmLineCapabilitiesV42bis 1.3.6.1.2.1.38.1.1.5.16
ITU V.42bis
                   mdmLineCapabilitiesMNP1 1.3.6.1.2.1.38.1.1.5.17
MNP1
                   mdmLineCapabilitiesMNP2 1.3.6.1.2.1.38.1.1.5.18
MNP2
                   mdmLineCapabilitiesMNP3 1.3.6.1.2.1.38.1.1.5.19
MNP3
                   mdmLineCapabilitiesMNP4 1.3.6.1.2.1.38.1.1.5.20
MNP4
                   mdmLineCapabilitiesMNP5 1.3.6.1.2.1.38.1.1.5.21
MNP5
                   mdmLineCapabilitiesMNP6 1.3.6.1.2.1.38.1.1.5.22
MNP6
                   mdmLineCapabilitiesMNP7 1.3.6.1.2.1.38.1.1.5.23
MNP7
                   mdmLineCapabilitiesMNP8 1.3.6.1.2.1.38.1.1.5.24
MNP8
                   mdmLineCapabilitiesMNP9 1.3.6.1.2.1.38.1.1.5.25
MNP9
                   mdmLineCapabilitiesMNP10 1.3.6.1.2.1.38.1.1.5.26
MNP10
                   mdmLineCapabilitiesV29 1.3.6.1.2.1.38.1.1.5.27
ITU V.29
                   mdmLineCapabilitiesV33 1.3.6.1.2.1.38.1.1.5.28
ITU V.33
                   mdmLineCapabilitiesBell208 1.3.6.1.2.1.38.1.1.5.29
Bell 208
               mdmDTEInterfaceTable 1.3.6.1.2.1.38.1.1.6 no-access
The modem DTE Interface Table augments the modem ID table.
                   mdmDTEInterfaceEntry 1.3.6.1.2.1.38.1.1.6.1 no-access
Entries in this table are created only by the agent. One entry exists for each modem managed by the agent.
                       mdmDTEActionDTROnToOff 1.3.6.1.2.1.38.1.1.6.1.1 integer read-write
Defines the action the modem will take when DTR drops. If the value is set to ignore(1), the modem takes no action when DTR drops. Typically, mdmDTEActionDTROffToOn would also be set to ignore(1) if this object is set to ignore(1). If the value is escapeToCommandMode(2), the modem remains connected and enters command mode. If the value is disconnectCall(3), the current call (if any) is terminated and the modem will not auto-answer while DTR is off. If the value is resetModem(4), the current call (if any) is terminated and the modem is reset. Enumeration: 'ignore': 1, 'escapeToCommandMode': 2, 'disconnectCall': 3, 'resetModem': 4.
                       mdmDTEActionDTROffToOn 1.3.6.1.2.1.38.1.1.6.1.2 integer read-write
Defines the action the modem will take when DTR is raised. If the value is set to ignore(1), the modem takes no action when DTR is raised. Typically, mdmDTEActionDTROnToOff would also be set to ignore(1) if this object is set to ignore(1). If the value is set to enableDial(2), the modem prepares to dial an outgoing call. If the value is set to autoAnswerEnable(3), the modem will be configured to answer any incoming call. If the value is set to establishConnection(4), the modem dials an implementation specific number. Immediately after any reset or power-on of the modem, if the DTR is high, the action specified here will be executed. Enumeration: 'ignore': 1, 'enableDial': 2, 'autoAnswerEnable': 3, 'establishConnection': 4.
                       mdmDTESyncTimingSource 1.3.6.1.2.1.38.1.1.6.1.3 integer read-write
The clock source for synchronous transmissions. If set to internal(1), the modem is the clock source and sends the clock signals to the DTE. If set to external(2), the transmit clock signals are provided by the DTE. If loopback(3), the modem receiver clock is used for the transmit clock. If network(4), the clock signals are supplied by the DCE interface. If the modem is not in synchronous mode, setting this object will have no effect on the current operations of the modem. Enumeration: 'network': 4, 'internal': 1, 'external': 2, 'loopback': 3.
                       mdmDTESyncAsyncMode 1.3.6.1.2.1.38.1.1.6.1.4 integer read-write
The operational mode of the modem. If the value is syncAfterDial(3), the modem will accept commands in asynchronous mode and change to synchronous mode to pass data after a dial sequence has been executed. Enumeration: 'async': 1, 'sync': 2, 'syncAfterDial': 3.
                       mdmDTEInactivityTimeout 1.3.6.1.2.1.38.1.1.6.1.5 integer32 read-write
The amount of idle time in minutes that the modem will wait before disconnecting a connection. When a call is connected and no data is transferred (continuous marking condition) on both circuits 103 and 104 for the specified time, the DCE disconnects the call. If the value is 0, no idle disconnect will occur. This function applies to asynchronous dial operations only and is intended for administrative control over idle connections.
               mdmCallControlTable 1.3.6.1.2.1.38.1.1.7 no-access
The modem Call Control Table augments the modem ID table.
                   mdmCallControlEntry 1.3.6.1.2.1.38.1.1.7.1 no-access
Entries in this table are created only by the agent. One entry exists for each modem managed by the agent.
                       mdmCCRingsBeforeAnswer 1.3.6.1.2.1.38.1.1.7.1.1 integer32 read-write
Determines which ring the modem will wait to answer the phone on. If this value is `0', the modem will not go offhook and answer a call when a ring signal is detected.
                       mdmCCCallSetUpFailTimer 1.3.6.1.2.1.38.1.1.7.1.2 integer32 read-write
This parameter specifies the amount of time, in seconds, that the modem shall allow between either answering a call (automatically or manually) or completion of dialing, and establishment of a connection with the remote modem. If no connection is established during this time, the modem disconnects from the line and returns a result code indicating the cause of the disconnection. In TIA-602, this is controlled by the value in the S7 register.
                       mdmCCResultCodeEnable 1.3.6.1.2.1.38.1.1.7.1.3 integer read-write
When disabled, the DCE shall issue no 'result codes' of any kind to the DTE either in response to unsolicited events (eg. ring signal), or commands. In TIA-602, this is controlled by the ATQ command. When numericEnabled, the DCE shall issue result codes in numeric form. When verboseEnabled, the DCE shall issue result codes in a verbose, textual form. Enumeration: 'disabled': 1, 'numericEnabled': 2, 'verboseEnabled': 3.
                       mdmCCEscapeAction 1.3.6.1.2.1.38.1.1.7.1.4 integer read-write
The modem's action upon successfully recognizing the 'escape to command mode' character sequence. Enumeration: 'enterCommandMode': 3, 'hangUp': 2, 'ignoreEscape': 1.
                       mdmCCCallDuration 1.3.6.1.2.1.38.1.1.7.1.5 integer32 read-only
Present or last completed connection time in seconds. If there have been no previous connections, this value should be -1.
                       mdmCCConnectionFailReason 1.3.6.1.2.1.38.1.1.7.1.6 integer read-only
Indicates the reason that the last connection or attempt failed. The meaning of each reason code is explained below. unknown: This code means the failure reason is unknown or there has been no previous call. other: This code used when no other code is applicable. Additional vendor information may be available elsewhere. managementCommand: A management command terminated the call. These commands include escaping to command mode, initiating dialing, restoring lines, and disconnecting. inactivityTimeout: The call was terminated because it was inactive for at the minimum duration specified. mnpIncompatibility: The modems are unable to resolve MNP protocol differences. protocolError: An error occured in one of protocol in use. Further information is required to determine in which protocol the error occurred, and the exact nature of the error. powerLoss: The modem lost power and disconnected the call. equipmentFailure: The modem equipment failed. dtrDrop: DTR has been turned off while the modem is to disconnect on DTR drop. (Ref: V.58 cct108TurnedOff) noDialTone: If the modem is to monitor for call progress tones, but the modem has failed to detect dial tone while attempting to dial a number. lineBusy: Busy signal is detected while busy signal detection is enabled, or while the 'W' or '@' dial modifier is used. (Ref: V.58 engagedTone) noAnswer: The call was not answered. voiceDetected: A voice was detected on the call. carrierLost: Indicates that the modem has disconnected due to detection of loss of carrier. In TIA-602, the S10 register determines the time that loss of carrier must be detected before the modem disconnects. trainingFailed: Indicates that the modems did not successfully train and reach data mode on the previous connection. faxDetected: A fax was detected on the call. Enumeration: 'voiceDetected': 33, 'powerLoss': 10, 'unknown': 1, 'noAnswer': 32, 'equipmentFailure': 11, 'trainingFailed': 41, 'noDialTone': 30, 'inactivityTimeout': 4, 'other': 2, 'mnpIncompatibility': 5, 'carrierLost': 40, 'dtrDrop': 20, 'managementCommand': 3, 'protocolError': 6, 'faxDetected': 42, 'lineBusy': 31.
               mdmCCStoredDialStringTable 1.3.6.1.2.1.38.1.1.8 no-access
The table of stored dial strings.
                   mdmCCStoredDialStringEntry 1.3.6.1.2.1.38.1.1.8.1 no-access
A stored dial string.
                       mdmCCStoredDialStringIndex 1.3.6.1.2.1.38.1.1.8.1.1 integer32 no-access
The unique index of a particular dial string.
                       mdmCCStoredDialString 1.3.6.1.2.1.38.1.1.8.1.2 displaystring read-write
A dial string stored in the modem.
               mdmECTable 1.3.6.1.2.1.38.1.1.9 no-access
The modem error correcting table augments the modem ID table.
                   mdmECEntry 1.3.6.1.2.1.38.1.1.9.1 no-access
Entries in this table are created only by the agent. One entry exists for each modem managed by the agent.
                       mdmECErrorControlUsed 1.3.6.1.2.1.38.1.1.9.1.1 object identifier read-only
Indicates the error control method used during the current or previous call. This shall be one of the values for error control protocols registered in the capabilities table for this modem. If no error control protocol is in use, this object shall have the value '{0 0}'.
               mdmDCTable 1.3.6.1.2.1.38.1.1.10 no-access
The modem data compression table augments the modem ID table.
                     mdmDCEntry 1.3.6.1.2.1.38.1.1.10.1 no-access
Entries in this table are created only by the agent. One entry exists for each modem managed by the agent.
                         mdmDCCompressionTypeUsed 1.3.6.1.2.1.38.1.1.10.1.1 object identifier read-only
Indicates the data compression method used during the current or previous call. This shall be one of the values for compression protocols registered in the capabilities table for this modem. If no compression protocol is in use, this object shall have the value '{0 0}'.
               mdmSCTable 1.3.6.1.2.1.38.1.1.11 no-access
The modem signal convertor table augments the modem ID table.
                     mdmSCEntry 1.3.6.1.2.1.38.1.1.11.1 no-access
Entries in this table are created only by the agent. One entry exists for each modem managed by the agent.
                         mdmSCCurrentLineTransmitRate 1.3.6.1.2.1.38.1.1.11.1.1 integer32 read-only
The current link transmit rate of a connection, or the last link transmit rate of the last connection in bits per second.
                         mdmSCCurrentLineReceiveRate 1.3.6.1.2.1.38.1.1.11.1.2 integer32 read-only
The current link receive rate of a connection, or the last link receive rate of the last connection in bits per second.
                         mdmSCInitialLineTransmitRate 1.3.6.1.2.1.38.1.1.11.1.3 integer32 read-only
The initial link transmit rate of the current connection, or the initial link transmit rate of the last connection in bits per second.
                         mdmSCInitialLineReceiveRate 1.3.6.1.2.1.38.1.1.11.1.4 integer32 read-only
The initial link receive rate of the current connection, or the initial link receive rate of the last connection in bits per second.
                         mdmSCModulationSchemeUsed 1.3.6.1.2.1.38.1.1.11.1.5 object identifier read-only
The modulation scheme of the current or previous call. This shall be one of the values for modulation protocols registered in the capabilities table for this modem.
               mdmStatsTable 1.3.6.1.2.1.38.1.1.12 no-access
The modem statistics Table augments the modem ID table.
                     mdmStatsEntry 1.3.6.1.2.1.38.1.1.12.1 no-access
Entries in this table are created only by the agent. One entry exists for each modem managed by the agent.
                         mdmStatsRingNoAnswers 1.3.6.1.2.1.38.1.1.12.1.1 counter32 read-only
The number of events in which ringing was detected but the call was not answered.
                         mdmStatsIncomingConnectionFailures 1.3.6.1.2.1.38.1.1.12.1.2 counter32 read-only
The number of incoming connection requests that this modem answered in which it could not train with the other DCE.
                         mdmStatsIncomingConnectionCompletions 1.3.6.1.2.1.38.1.1.12.1.3 counter32 read-only
The number of incoming connection requests that this modem answered and successfully trained with the other DCE.
                         mdmStatsFailedDialAttempts 1.3.6.1.2.1.38.1.1.12.1.4 counter32 read-only
The number of call attempts that failed because the modem didn't go off hook, or there was no dialtone.
                         mdmStatsOutgoingConnectionFailures 1.3.6.1.2.1.38.1.1.12.1.5 counter32 read-only
The number of outgoing calls from this modem which sucessfully went off hook and dialed, in which it could not train with the other DCE.
                         mdmStatsOutgoingConnectionCompletions 1.3.6.1.2.1.38.1.1.12.1.6 counter32 read-only
The number of outgoing calls from this modem which resulted in successfully training with the other DCE.
                         mdmStatsRetrains 1.3.6.1.2.1.38.1.1.12.1.7 counter32 read-only
The number of retrains experienced on connections on this line.
                         mdmStats2400OrLessConnections 1.3.6.1.2.1.38.1.1.12.1.8 counter32 read-only
The number of connections initially established at a modulation speed of 2400 bits per second or less.
                         mdmStats2400To14400Connections 1.3.6.1.2.1.38.1.1.12.1.9 counter32 read-only
The number of connections initially established at a modulation speed of greater than 2400 bits per second and less than 14400 bits per second.
                         mdmStatsGreaterThan14400Connections 1.3.6.1.2.1.38.1.1.12.1.10 counter32 read-only
The number of connections initially established at a modulation speed of greater than 14400 bits per second.
                         mdmStatsErrorControlledConnections 1.3.6.1.2.1.38.1.1.12.1.11 counter32 read-only
The number of established connections using an error control protocol.
                         mdmStatsCompressedConnections 1.3.6.1.2.1.38.1.1.12.1.12 counter32 read-only
The number of established connections using a compression protocol.
                         mdmStatsCompressionEfficiency 1.3.6.1.2.1.38.1.1.12.1.13 integer32 read-only
The number of bytes transferred into the compression encoder divided by the number of bytes transferred out of the encoder, multiplied by 100 for either the current or last call. If a data compression protocol is not in use, this value shall be `100'.
                         mdmStatsSentOctets 1.3.6.1.2.1.38.1.1.12.1.14 counter32 read-only
The number of octets presented to the modem by the DTE.
                         mdmStatsReceivedOctets 1.3.6.1.2.1.38.1.1.12.1.15 counter32 read-only
The number of octets presented to the DTE by the modem.
                         mdmStatsSentDataFrames 1.3.6.1.2.1.38.1.1.12.1.16 counter32 read-only
The number of data frames sent on the line interface. If there is no frame-oriented protocol in use on the line interface, this counter shall not increment.
                         mdmStatsReceivedDataFrames 1.3.6.1.2.1.38.1.1.12.1.17 counter32 read-only
The number of data frames received on the line interface. If there is no frame-oriented protocol in use on the line interface, this counter shall not increment.
                         mdmStatsResentFrames 1.3.6.1.2.1.38.1.1.12.1.18 counter32 read-only
The number of times this modem retransmits frames on the line interface. If there is no frame-oriented protocol in use on the line interface, this counter shall not increment.
                         mdmStatsErrorFrames 1.3.6.1.2.1.38.1.1.12.1.19 counter32 read-only
The number of block errors received on the link. If there is no frame-oriented protocol in use on the line interface, this counter shall not increment.
           mdmConformance 1.3.6.1.2.1.38.1.2
               mdmCompliances 1.3.6.1.2.1.38.1.2.1
                   mdmCompliance 1.3.6.1.2.1.38.1.2.1.1
The compliance statement for SNMPv2 entities which implement the modem MIB.
               mdmGroups 1.3.6.1.2.1.38.1.2.2
                   mdmIDGroup 1.3.6.1.2.1.38.1.2.2.1
A collection of objects that identify the manufacturer and model information for a modem.
                   mdmLineInterfaceGroup 1.3.6.1.2.1.38.1.2.2.2
A collection of objects that describe the configuration and state of the modem's line interface.
                   mdmDTEInterfaceGroup 1.3.6.1.2.1.38.1.2.2.3
A collection of objects that describe the configuration and state of the modem's DTE interface.
                   mdmCallControlGroup 1.3.6.1.2.1.38.1.2.2.4
A collection of objects that describe the configuration of call control capabilities on the modem and the status of calls placed with this modem.
                   mdmErrorControlGroup 1.3.6.1.2.1.38.1.2.2.5
A collection of objects that describe the configuration and state of error control on a modem.
                   mdmDataCompressionGroup 1.3.6.1.2.1.38.1.2.2.6
A collection of objects that describe the configuration and state of data compression on a modem.
                   mdmSignalConvertorGroup 1.3.6.1.2.1.38.1.2.2.7
A collection of objects that describe the configuration and state of error control on a modem.
                   mdmStatisticsGroup 1.3.6.1.2.1.38.1.2.2.8
A collection of objects that describe the state of calls on this modem.