MITEL-IPFILTER-MIB: View SNMP OID List / Download MIB

VENDOR: MITEL, CORP.


 Home MIB: MITEL-IPFILTER-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, IF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mitel 1.3.6.1.4.1.1027
           mitelIdentification 1.3.6.1.4.1.1027.1
               mitelIdCallServers 1.3.6.1.4.1.1027.1.2
                   mitelIdCsIpera1000 1.3.6.1.4.1.1027.1.2.4
                       mitelIpera1000Notifications 1.3.6.1.4.1.1027.1.2.4.0
Call Server Ipera 1000 Notifications.
                           mitelAccResTableTrapped 1.3.6.1.4.1.1027.1.2.4.0.402
The mitelAccResTableTrapped trap indicates that a datagram has matched a mitelFltGrpAccessRestrictEntry that has the mitelAccResTableTrap enabled.
           mitelProprietary 1.3.6.1.4.1.1027.4
               mitelPropIpNetworking 1.3.6.1.4.1.1027.4.8
                   mitelIpNetRouter 1.3.6.1.4.1.1027.4.8.1
                       mitelRouterIpGroup 1.3.6.1.4.1.1027.4.8.1.1
                           mitelIpGrpFilterGroup 1.3.6.1.4.1.1027.4.8.1.1.1
The MITEL IP MIB module.
                               mitelFltGrpAccessRestrictEnable 1.3.6.1.4.1.1027.4.8.1.1.1.1 integer read-write
This object indicates if the IP Access Restriction table is being used to filter or forward packets. Enumeration: 'disabled': 2, 'enabled': 1.
                               mitelFltGrpLogicalTable 1.3.6.1.4.1.1027.4.8.1.1.1.2 no-access
A table containing information about logical IP LAN destinations.
                                   mitelFltGrpLogicalEntry 1.3.6.1.4.1.1027.4.8.1.1.1.2.1 no-access
Each entry of this table contains information about a specific logical interface toa local area network. Each logical LAN can support routing or bridging functions, these are considered virtual interfaces.
                                       mitelLogTableAccessDef 1.3.6.1.4.1.1027.4.8.1.1.1.2.1.1 integer read-write
This object indicates what default access rights will apply to IP packets that do not match any of the access restrictions. Enumeration: 'filter': 1, 'forward': 2.
                                       mitelLogTableAllowSrcRouting 1.3.6.1.4.1.1027.4.8.1.1.1.2.1.2 integer read-write
This indicates whether IP datagrams received on this interface and containing a source route option are to be discarded or accepted. Enumeration: 'disabled': 2, 'enabled': 1.
                               mitelFltGrpAccessRestrictTable 1.3.6.1.4.1.1027.4.8.1.1.1.3 no-access
The IP Access REstriction configuration table.
                                   mitelFltGrpAccessRestrictEntry 1.3.6.1.4.1.1027.4.8.1.1.1.3.1 no-access
Contains information about a single IP Access filter.
                                       mitelAccResTableIfIndex 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.1 integer32 read-only
Identifies the destination interface to which this filter apply.
                                       mitelAccResTableOrder 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.2 integer32 read-only
Specifies the order that the filters on a destination are searched.
                                       mitelAccResTableType 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.3 integer read-write
This object indicates what action should be taken when a match on this entry has occurred. Enumeration: 'filter': 1, 'forward': 2, 'neither': 3.
                                       mitelAccResTableSrcAddrFrom 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.4 ipaddress read-write
Defines the lower bound of the source IP address range. When determining address ranges, these four values are sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and 0.0.0.1.
                                       mitelAccResTableSrcAddrTo 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.5 ipaddress read-write
Defines the upper bound of the source IP address range. When determining address ranges, these four values are sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and 0.0.0.1.
                                       mitelAccResTableSrcAddrOutsideRange 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.6 integer read-write
This indicates whether action is taken on values outside of the source IP address range or within that range. Enumeration: 'disabled': 2, 'enabled': 1.
                                       mitelAccResTableDstAddrFrom 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.7 ipaddress read-write
Defines the lower bound of the destination IP address range. When determining address ranges, these four values are sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and 0.0.0.1.
                                       mitelAccResTableDstAddrTo 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.8 ipaddress read-write
Defines the upper bound of the destination IP address range. When determining address ranges, these four values are sequential: 255.255.255.254, 255.255.255.255, 0.0.0.0, and 0.0.0.1.
                                       mitelAccResTableDstAddrOutsideRange 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.9 integer read-write
This indicates whether action is taken on values outside of the destination IP address range or within that range. Enumeration: 'disabled': 2, 'enabled': 1.
                                       mitelAccResTableProtocolFrom 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.10 integer read-write
Defines the lower bound of the protocol ID range. When determining protocol ID ranges, these four values are sequential: 254, 255, 0, and 1.
                                       mitelAccResTableProtocolTo 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.11 integer read-write
Defines the upper bound of the protocol ID range. When determining protocol ID ranges, these four values are sequential: 254, 255, 0, and 1.
                                       mitelAccResTableProtocolOutsideRange 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.12 integer read-write
This indicates whether action is taken on values outside of the protocol ID range or within that range. Enumeration: 'disabled': 2, 'enabled': 1.
                                       mitelAccResTableSrcPortFrom 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.13 integer read-write
Defines the lower bound of the source port number range. When determining port number ranges, these four values are sequential: 65534, 65535, 0, and 1.
                                       mitelAccResTableSrcPortTo 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.14 integer read-write
Defines the upper bound of the source port number range. When determining port number ranges, these four values are sequential: 65534, 65535, 0, and 1.
                                       mitelAccResTableSrcPortOutsideRange 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.15 integer read-write
This indicates whether action is taken on values outside of the source port number range or within that range. Enumeration: 'disabled': 2, 'enabled': 1.
                                       mitelAccResTableDstPortFrom 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.16 integer read-write
Defines the lower bound of the destination port number range. When determining port number ranges, these four values are sequential: 65534, 65535, 0, and 1.
                                       mitelAccResTableDstPortTo 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.17 integer read-write
Defines the upper bound of the destination port number range. When determining port number ranges, these four values are sequential: 65534, 65535, 0, and 1.
                                       mitelAccResTableDstPortOutsideRange 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.18 integer read-write
This indicates whether action is taken on values outside of the destination port number range or within that range. Enumeration: 'disabled': 2, 'enabled': 1.
                                       mitelAccResTableTcpSyn 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.19 integer read-write
TCP header, synchronize sequence numbers flag. Enumeration: 'zero': 2, 'any': 1, 'one': 3.
                                       mitelAccResTableTcpAck 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.20 integer read-write
TCP header, acknowledgment flag. Enumeration: 'zero': 2, 'any': 1, 'one': 3.
                                       mitelAccResTableTcpFin 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.21 integer read-write
TCP header, finish flag. Enumeration: 'zero': 2, 'any': 1, 'one': 3.
                                       mitelAccResTableTcpRst 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.22 integer read-write
TCP header, reset flag. Enumeration: 'zero': 2, 'any': 1, 'one': 3.
                                       mitelAccResTableMatchIn 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.23 integer read-write
Indicates whether the filter applies to datagrams received on the interface. Normally, either mitelAccResTableMatchIn or mitelAccResTableMatchOut should be enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                       mitelAccResTableMatchOut 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.24 integer read-write
Indicates whether the filter applies to datagrams transmitted on the interface. Normally, either mitelAccResTableMatchIn or mitelAccResTableMatchOut should be enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                       mitelAccResTableLog 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.25 integer read-write
Controls whether a log message is to be produced each time a datagram matches the filter. Enumeration: 'disabled': 2, 'enabled': 1.
                                       mitelAccResTableTrap 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.26 integer read-write
Controls the generation of SNMP trap. Enumeration: 'disabled': 2, 'enabled': 1.
                                       mitelAccResTableStatus 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.27 rowstatus read-only
The current status of this entry.
                                       mitelAccResTableCount 1.3.6.1.4.1.1027.4.8.1.1.1.3.1.28 integer32 read-only
Records the number of datagrams that matched this instance.