MG-SNMP-UPS-MIB: View SNMP OID List / Download MIB

VENDOR: MERLIN GERIN


 Home MIB: MG-SNMP-UPS-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 merlinGerin 1.3.6.1.4.1.705
         upsmg 1.3.6.1.4.1.705.1
             upsmgIdent 1.3.6.1.4.1.705.1.1
                 upsmgIdentFamilyName 1.3.6.1.4.1.705.1.1.1 displaystring read-write
The UPS family name (e.g. `PULSAR', `COMET', `GALAXY', ...).
                 upsmgIdentModelName 1.3.6.1.4.1.705.1.1.2 displaystring read-write
The UPS model name (e.g. `PSX20', `SV9', ... ).
                 upsmgIdentRevisionLevel 1.3.6.1.4.1.705.1.1.3 displaystring read-write
The UPS revision level.
                 upsmgIdentFirmwareVersion 1.3.6.1.4.1.705.1.1.4 displaystring read-write
The UPS microprocessor firmware version number.
                 upsmgIdentUserID 1.3.6.1.4.1.705.1.1.5 displaystring read-write
The UPS user identification (set by administrator).
                 upsmgIdentInstallationDate 1.3.6.1.4.1.705.1.1.6 displaystring read-write
The UPS installation date in dd/mm/yy format.
                 upsmgIdentSerialNumber 1.3.6.1.4.1.705.1.1.7 displaystring read-write
The UPS manufacturing serial number.
             upsmgManagement 1.3.6.1.4.1.705.1.2
                 upsmgManagersNum 1.3.6.1.4.1.705.1.2.1 integer read-only
The number of managers that could manage the UPS.
                 upsmgManagersTable 1.3.6.1.4.1.705.1.2.2 no-access
The table of managers.
                     upsmgManagersEntry 1.3.6.1.4.1.705.1.2.2.1 no-access
The description of a manager entry in the managers table.
                         mgmanagerIndex 1.3.6.1.4.1.705.1.2.2.1.1 integer read-only
A unique value for each manager. Its value ranges between 1 and the value of upsmgManagersNum.
                         mgmanagerDeviceNumber 1.3.6.1.4.1.705.1.2.2.1.2 integer read-write
This object is the number of the manager device in the DevicesTable of the Config group. This means that the manager is powered by the UPS. If not the default value is 0.
                         mgmanagerNMSType 1.3.6.1.4.1.705.1.2.2.1.3 integer read-write
The type of manager according to the NMS platform. We include in the manager class all systems which will be notified by the agent via receiving traps (e.g. basic to complex NMS software). Enumeration: 'dview': 4, 'autolearning': 10, 'novellnms': 7, 'umview': 3, 'sunnetmanager': 6, 'umclient': 1, 'hpopenview': 5, 'ibmnetview': 8, 'other': 9, 'decnetview': 2.
                         mgmanagerCommType 1.3.6.1.4.1.705.1.2.2.1.4 integer read-write
The level of communication protocol for that manager. Setting this object to value invalid(2) has the effect of invalidating the corresponding entry in the upsmgManagersTable. It is an implementation-specific matter as to wether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entry not currently in use. Proper interpretation of such entries requires examination of the relevant mgmanagerCommType object. Enumeration: 'cmip': 3, 'other': 1, 'snmpv2': 5, 'snmpv1': 4, 'invalid': 2.
                         mgmanagerDescr 1.3.6.1.4.1.705.1.2.2.1.5 displaystring read-write
A textual string containing information about the manager. (manufacturer and version description).
                         mgmanagerAddress 1.3.6.1.4.1.705.1.2.2.1.6 ipaddress read-write
The IP address of the manager station receiving traps. The value of this object is meaningful if and only if the value of the relevant mgmanagerCommType object is snmp type.
                         mgmanagerCommunity 1.3.6.1.4.1.705.1.2.2.1.7 displaystring read-write
The manager community string.
                         mgmanagerSeverityLevel 1.3.6.1.4.1.705.1.2.2.1.8 integer read-write
The severity level of traps to be received by this manager.
                         mgmanagerTrapAck 1.3.6.1.4.1.705.1.2.2.1.9 integer read-write
The manager Trap Acknowledgement status. Setting this object to mgnoack(2) or stdnomg(3) or cpqnoack(5) disables the trap acknowledgement from the related manager. The MG enterprise specific trap should then be sent only once by the agent to this manager in case of mgnoack(2), and should not be sent by the agent to this manager in case of stdnomg(3) or cpqnoack(5). mgack(1) allows a basic mecanism for acknowledged traps using upsmgAgentTrapAck object set by the manager to the enterprise specific number of the trap. mgacks(5) allows the enhanced mecanism using the upsmgAgentTrapSignature object set by the manager to the signature received within the trap var binding. Enumeration: 'stdnomg': 3, 'mgacks': 4, 'cpqnoack': 5, 'mgack': 1, 'mgnoack': 2.
             upsmgReceptacle 1.3.6.1.4.1.705.1.3
                 upsmgReceptaclesNum 1.3.6.1.4.1.705.1.3.1 integer read-only
The total number of receptacles controlled by the UPS.
                 upsmgReceptaclesTable 1.3.6.1.4.1.705.1.3.2 no-access
The table of receptacles that are controlled by the UPS.
                     upsmgReceptaclesEntry 1.3.6.1.4.1.705.1.3.2.1 no-access
The description of a receptacle in the table.
                         mgreceptacleIndex 1.3.6.1.4.1.705.1.3.2.1.1 integer read-only
A unique value for each receptacle. Its value ranges between 1 and the value of upsmgReceptaclesNum.
                         mgreceptacleLevel 1.3.6.1.4.1.705.1.3.2.1.2 integer read-write
The level of receptacle. Setting this object to value invalid(2) has the effect of invalidating the corresponding entry in the upsmgReceptaclesTable. It is an implementation-specific matter as to wether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entry not currently in use. Proper interpretation of such entries requires examination of the relevant receptacleLevel object. Values 1 and 4 are reserved, value 3 is used to identify a simple one-level receptacle, and values greater than 4 represent a group of equivalent receptacles.
                         mgreceptacleType 1.3.6.1.4.1.705.1.3.2.1.3 displaystring read-write
A textual string for the receptacle type.
                         mgreceptacleIdent 1.3.6.1.4.1.705.1.3.2.1.4 displaystring read-write
A textual string identification for the user.
                         mgreceptacleState 1.3.6.1.4.1.705.1.3.2.1.5 integer read-only
The ON/OFF status of the receptacle. Enumeration: 'normalON': 3, 'normalOFF': 4, 'scheduleON': 7, 'scheduleOFF': 8, 'manualOFF': 2, 'controlOFF': 6, 'manualON': 1, 'controlON': 5.
                         mgreceptacleReceptacle 1.3.6.1.4.1.705.1.3.2.1.6 integer read-write
The receptacle number of the second level receptacle father. The value of this object is meaningful if and only if the value of the relevant mgreceptacleType object is related to a two-level receptacle class. Otherwise the default value is 0.
                         mgreceptaclePowerCons 1.3.6.1.4.1.705.1.3.2.1.7 integer read-write
The volt-ampere rating of the receptacle. The value of this object is meaningful if and only if the value of the relevant mgreceptacleType object is related to a two-level receptacle class. Otherwise the default value is 0.
                         mgreceptacleOverload 1.3.6.1.4.1.705.1.3.2.1.8 integer read-write
The overload status of the receptacle. The value of this object is meaningful if and only if the value of the relevant mgreceptacleType object is related to a two-level receptacle class. Otherwise the default value is 0.
                         mgreceptacleAutonomy 1.3.6.1.4.1.705.1.3.2.1.9 integer read-write
The receptacle autonomy. The value of this object is meaningful if and only if the value of the relevant mgreceptacleType object is related to a two-level receptacle class. Otherwise the default value is 0.
             upsmgConfig 1.3.6.1.4.1.705.1.4
                 upsmgConfigBatteryInstalled 1.3.6.1.4.1.705.1.4.1 integer read-write
The battery installed status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgConfigNominalBatteryVoltage 1.3.6.1.4.1.705.1.4.2 integer read-write
The nominal battery voltage.
                 upsmgConfigNominalBatteryTime 1.3.6.1.4.1.705.1.4.3 integer read-write
The full load battery autonomy time.
                 upsmgConfigNominalRechargeTime 1.3.6.1.4.1.705.1.4.4 integer read-write
The recharge time to go from low battery cut off to full charge at full load.
                 upsmgConfigMinRechargeLevel 1.3.6.1.4.1.705.1.4.5 integer read-write
The minimum battery level required to supply power on the loads after low battery condition turn off and restart on main return.
                 upsmgConfigMaxRechargeTime 1.3.6.1.4.1.705.1.4.6 integer read-write
The maximum time delay of battery recharge before supply power to the loads.
                 upsmgConfigLowBatteryTime 1.3.6.1.4.1.705.1.4.7 integer read-write
To set remaining time value for low battery condition.
                 upsmgConfigLowBatteryLevel 1.3.6.1.4.1.705.1.4.8 integer read-write
To set battery level value for low battery condition.
                 upsmgConfigAutoRestart 1.3.6.1.4.1.705.1.4.9 integer read-write
The automatic restart enabling status. Enumeration: 'always': 1, 'onmain': 3, 'never': 2.
                 upsmgConfigShutdownTimer 1.3.6.1.4.1.705.1.4.10 integer read-write
To set ups shutdown timer from on battery condition.
                 upsmgConfigSysShutDuration 1.3.6.1.4.1.705.1.4.11 integer read-write
To set ups shutdown delay (Sn delay).
                 upsmgConfigVARating 1.3.6.1.4.1.705.1.4.12 integer read-write
The UPS nominal VA rating.
                 upsmgConfigLowTransfer 1.3.6.1.4.1.705.1.4.13 integer read-write
The low voltage transfer point.
                 upsmgConfigHighTransfer 1.3.6.1.4.1.705.1.4.14 integer read-write
The high voltage transfer point.
                 upsmgConfigOutputNominalVoltage 1.3.6.1.4.1.705.1.4.15 integer read-write
The nominal output voltage.
                 upsmgConfigOutputNominalCurrent 1.3.6.1.4.1.705.1.4.16 integer read-write
The nominal output current.
                 upsmgConfigOutputNomFrequency 1.3.6.1.4.1.705.1.4.17 integer read-write
The nominal output frequency.
                 upsmgConfigByPassType 1.3.6.1.4.1.705.1.4.18 integer read-write
The UPS by pass switch type. Enumeration: 'none': 1, 'static': 3, 'relay': 2.
                 upsmgConfigAlarmAudible 1.3.6.1.4.1.705.1.4.19 integer read-write
To set audible alarm status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgConfigAlarmTimeDelay 1.3.6.1.4.1.705.1.4.20 integer read-write
To set audible alarm time delay.
                 upsmgConfigDevicesNum 1.3.6.1.4.1.705.1.4.21 integer read-write
The number of devices that are powered by the UPS.
                 upsmgConfigDevicesTable 1.3.6.1.4.1.705.1.4.22 no-access
The table of devices that are powered by the UPS.
                       upsmgConfigDevicesEntry 1.3.6.1.4.1.705.1.4.22.1 no-access
The description of a device entry in the devices table.
                           mgdeviceIndex 1.3.6.1.4.1.705.1.4.22.1.1 integer read-only
A unique value for each device. Its value ranges between 1 and the value of upsmgDevicesNum.
                           mgdeviceReceptacleNum 1.3.6.1.4.1.705.1.4.22.1.2 integer read-write
The receptacle number of the device plugged into the UPS. This value gives index entry in the ReceptaclesTable object of the Receptacle group. A value of 0 invalidates the entry in the DevicesTable.
                           mgdeviceIdent 1.3.6.1.4.1.705.1.4.22.1.3 displaystring read-write
A textual string for device user identification.
                           mgdeviceVaRating 1.3.6.1.4.1.705.1.4.22.1.4 integer read-write
The volt-ampere rating of the device plugged into the UPS.
                           mgdeviceSequenceOff 1.3.6.1.4.1.705.1.4.22.1.5 integer read-write
To set the device position in the remote shutdown sequence.
                           mgdeviceSequenceOn 1.3.6.1.4.1.705.1.4.22.1.6 integer read-write
To set the device position in the remote reboot sequence.
                           mgdeviceShutdownDuration 1.3.6.1.4.1.705.1.4.22.1.7 integer read-write
To set the duration from start of computer shut-down to complete.
                           mgdeviceBootUpDuration 1.3.6.1.4.1.705.1.4.22.1.8 integer read-write
To set the duration from start of computer boot-up to complete.
                 upsmgConfigReceptaclesTable 1.3.6.1.4.1.705.1.4.23 no-access
The table of receptacles.
                       upsmgConfigReceptaclesEntry 1.3.6.1.4.1.705.1.4.23.1 no-access
The description of a receptacle entry in the table.
                           mgreceptacleIndexb 1.3.6.1.4.1.705.1.4.23.1.1 integer read-only
A unique value for each receptacle. Its value ranges between 1 and the value of upsmgReceptaclesNum.
                           mgreceptacleStateTurnOn 1.3.6.1.4.1.705.1.4.23.1.2 integer read-write
Default return state at turn on. Enumeration: 'on': 1, 'off': 2, 'last': 3, 'schedule': 4.
                           mgreceptacleStateMainReturn 1.3.6.1.4.1.705.1.4.23.1.3 integer read-write
Default return state on main return. Enumeration: 'on': 1, 'off': 2, 'last': 3, 'schedule': 4.
                           mgreceptacleStateDischarge 1.3.6.1.4.1.705.1.4.23.1.4 integer read-write
Default return state on main return from battery discharge. Enumeration: 'on': 1, 'off': 2, 'last': 3, 'schedule': 4.
                           mgreceptacleShutoffLevel 1.3.6.1.4.1.705.1.4.23.1.5 integer read-write
Battery level for starting shutoff sequence.
                           mgreceptacleShutoffTimer 1.3.6.1.4.1.705.1.4.23.1.6 integer read-write
Time delay from on battery for starting shutoff sequence.
                           mgreceptacleRestartLevel 1.3.6.1.4.1.705.1.4.23.1.7 integer read-write
Battery level for starting restart sequence.
                           mgreceptacleRestartDelay 1.3.6.1.4.1.705.1.4.23.1.8 integer read-write
Time delay for starting restart sequence.
                           mgreceptacleShutdownDuration 1.3.6.1.4.1.705.1.4.23.1.9 integer read-only
Maximum Shutdown Duration for systems powered by this plug.
                           mgreceptacleBootUpDuration 1.3.6.1.4.1.705.1.4.23.1.10 integer read-only
Maximum Reboot Duration for systems powered by this plug.
                 upsmgConfigExtAlarmNum 1.3.6.1.4.1.705.1.4.24 integer read-only
The number of environ external alarm, value is between 8 and 32..
                 upsmgConfigExtAlarmTable 1.3.6.1.4.1.705.1.4.25 no-access
The table of environmental external alarms.
                       upsmgConfigExtAlarmEntry 1.3.6.1.4.1.705.1.4.25.1 no-access
The description of an external alarm in the table.
                           mgextAlarmIndex 1.3.6.1.4.1.705.1.4.25.1.1 integer read-only
A unique value for each external alarm. Its value ranges between 1 and the value of upsmgConfigExtAlarmNum.
                           mgextAlarmUID 1.3.6.1.4.1.705.1.4.25.1.2 displaystring read-write
A textual string for alarm state user identification.
                 upsmgConfigEmergencyTestFail 1.3.6.1.4.1.705.1.4.26 integer read-write
The emergency condition status on Battery test fail. Enumeration: 'yes': 1, 'no': 2.
                 upsmgConfigEmergencyOnByPass 1.3.6.1.4.1.705.1.4.27 integer read-write
The emergency condition status on By Pass. Enumeration: 'yes': 1, 'no': 2.
                 upsmgConfigEmergencyOverload 1.3.6.1.4.1.705.1.4.28 integer read-write
The emergency condition status on overload. Enumeration: 'yes': 1, 'no': 2.
                 upsmgConfigControlDayTable 1.3.6.1.4.1.705.1.4.29 no-access
The table of daily on/off time.
                       upsmgConfigControlDayEntry 1.3.6.1.4.1.705.1.4.29.1 no-access
The description of a daily on/off time schedule in the table.
                           mgcontrolDayIndex 1.3.6.1.4.1.705.1.4.29.1.1 integer read-only
The day index. It is a number between 1 and 7, 1 for Sunday, 2 for Monday, ...
                           mgcontrolDayOn 1.3.6.1.4.1.705.1.4.29.1.2 integer read-write
To set daily power on time. Any value greater than 86400 is to disable the Day On.
                           mgcontrolDayOff 1.3.6.1.4.1.705.1.4.29.1.3 integer read-write
To set daily power off time. Any value greater than 86400 is to disable the Day Off.
                 upsmgConfigLowBooster 1.3.6.1.4.1.705.1.4.30 integer read-write
To set UPS booster low threshold.
                 upsmgConfigHighBooster 1.3.6.1.4.1.705.1.4.31 integer read-write
To set UPS booster high threshold.
                 upsmgConfigLowFader 1.3.6.1.4.1.705.1.4.32 integer read-write
To set UPS fader low threshold.
                 upsmgConfigHighFader 1.3.6.1.4.1.705.1.4.33 integer read-write
To set UPS fader high threshold.
                 upsmgConfigEnvironmentTable 1.3.6.1.4.1.705.1.4.34 no-access
The table containing the configuration of the environment sensor.
                       upsmgConfigEnvironmentEntry 1.3.6.1.4.1.705.1.4.34.1 no-access
The description of an entry in the table.
                           upsmgConfigSensorIndex 1.3.6.1.4.1.705.1.4.34.1.1 integer read-only
The sensor index, ranging from 1 to upsmgEnvironmentNum.
                           upsmgConfigSensorName 1.3.6.1.4.1.705.1.4.34.1.2 displaystring read-write
The sensor user-friendly name.
                           upsmgConfigTemperatureLow 1.3.6.1.4.1.705.1.4.34.1.3 integer read-write
The low temperature threshold in unit 0.1 Cel.
                           upsmgConfigTemperatureHigh 1.3.6.1.4.1.705.1.4.34.1.4 integer read-write
The high temperature threshold in unit 0.1 Cel.
                           upsmgConfigTemperatureHysteresis 1.3.6.1.4.1.705.1.4.34.1.5 integer read-write
The temperature hysteresys used for threshold test in unit 0.1 Cel.
                           upsmgConfigHumidityLow 1.3.6.1.4.1.705.1.4.34.1.6 integer read-write
The low humidity threshold in unit 1 %.
                           upsmgConfigHumidityHigh 1.3.6.1.4.1.705.1.4.34.1.7 integer read-write
The high humidity threshold in unit 1 %.
                           upsmgConfigHumidityHysteresis 1.3.6.1.4.1.705.1.4.34.1.8 integer read-write
The humidity hysteresys used for threshold test in unit 1 %.
                           upsmgConfigInput1Name 1.3.6.1.4.1.705.1.4.34.1.9 displaystring read-write
The Input #1 user-friendly name.
                           upsmgConfigInput1ClosedLabel 1.3.6.1.4.1.705.1.4.34.1.10 displaystring read-write
The Input #1 label for closed position.
                           upsmgConfigInput1OpenLabel 1.3.6.1.4.1.705.1.4.34.1.11 displaystring read-write
The Input #1 label for open position.
                           upsmgConfigInput2Name 1.3.6.1.4.1.705.1.4.34.1.12 displaystring read-write
The Input #2 user-friendly name.
                           upsmgConfigInput2ClosedLabel 1.3.6.1.4.1.705.1.4.34.1.13 displaystring read-write
The Input #2 label for closed position.
                           upsmgConfigInput2OpenLabel 1.3.6.1.4.1.705.1.4.34.1.14 displaystring read-write
The Input #2 label for open position.
             upsmgBattery 1.3.6.1.4.1.705.1.5
                 upsmgBatteryRemainingTime 1.3.6.1.4.1.705.1.5.1 integer read-only
The time remaining actual charge vs actual load (dynamic).
                 upsmgBatteryLevel 1.3.6.1.4.1.705.1.5.2 integer read-only
The battery level as a percentage of charge.
                 upsmgBatteryRechargeTime 1.3.6.1.4.1.705.1.5.3 integer read-only
The actual operational battery recharge time to set point equal to upsmgConfigRechargeLevel. This value is computed from upsmgConfigRechargeLevel (level to reach), upsmgBatteryLevel (the actual reached level) and the UPS charge rate.
                 upsmgBatteryRechargeLevel 1.3.6.1.4.1.705.1.5.4 integer read-only
The actual value of the battery recharge level that will be reached during the time delay necessary to restart after power returns. This value is computed from upsmgConfigRechargeTime (the delay), upsmgBatteryLevel (the actual level) and the UPS charge rate.
                 upsmgBatteryVoltage 1.3.6.1.4.1.705.1.5.5 integer read-only
The actual battery voltage.
                 upsmgBatteryCurrent 1.3.6.1.4.1.705.1.5.6 integer read-only
The actual battery current.
                 upsmgBatteryTemperature 1.3.6.1.4.1.705.1.5.7 integer read-only
The battery temperature.
                 upsmgBatteryFullRechargeTime 1.3.6.1.4.1.705.1.5.8 integer read-only
The battery full recharge time (from 0 to 100 percent) at current load.
                 upsmgBatteryFaultBattery 1.3.6.1.4.1.705.1.5.9 integer read-only
The battery fault status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgBatteryNoBattery 1.3.6.1.4.1.705.1.5.10 integer read-only
The UPS has no Battery status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgBatteryReplacement 1.3.6.1.4.1.705.1.5.11 integer read-only
The UPS Battery to be replaced status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgBatteryUnavailableBattery 1.3.6.1.4.1.705.1.5.12 integer read-only
The UPS Battery is unavailable status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgBatteryNotHighCharge 1.3.6.1.4.1.705.1.5.13 integer read-only
The UPS Battery quit high condition status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgBatteryLowBattery 1.3.6.1.4.1.705.1.5.14 integer read-only
The battery low status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgBatteryChargerFault 1.3.6.1.4.1.705.1.5.15 integer read-only
The UPS Battery is not charging status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgBatteryLowCondition 1.3.6.1.4.1.705.1.5.16 integer read-only
The UPS is at low condition status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgBatteryLowRecharge 1.3.6.1.4.1.705.1.5.17 integer read-only
The UPS Battery is not recharged status. Enumeration: 'yes': 1, 'no': 2.
             upsmgInput 1.3.6.1.4.1.705.1.6
                 upsmgInputPhaseNum 1.3.6.1.4.1.705.1.6.1 integer read-only
The number of input phases.
                 upsmgInputPhaseTable 1.3.6.1.4.1.705.1.6.2 no-access
The table of input phases.
                     upsmgInputPhaseEntry 1.3.6.1.4.1.705.1.6.2.1 no-access
The description of an input phase.
                         mginputIndex 1.3.6.1.4.1.705.1.6.2.1.1 integer read-only
The input phase voltage index. It is a number between 1 and upsmgInputPhaseNum.
                         mginputVoltage 1.3.6.1.4.1.705.1.6.2.1.2 integer read-only
The input phase voltage.
                         mginputFrequency 1.3.6.1.4.1.705.1.6.2.1.3 integer read-only
The input phase frequency.
                         mginputMinimumVoltage 1.3.6.1.4.1.705.1.6.2.1.4 integer read-only
The input phase minimum voltage over the last minute.
                         mginputMaximumVoltage 1.3.6.1.4.1.705.1.6.2.1.5 integer read-only
The input phase maximum voltage over the last minute.
                         mginputCurrent 1.3.6.1.4.1.705.1.6.2.1.6 integer read-only
The input phase current.
                 upsmgInputBadStatus 1.3.6.1.4.1.705.1.6.3 integer read-only
The utility power bad voltage or bad frequency status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgInputLineFailCause 1.3.6.1.4.1.705.1.6.4 integer read-only
The utility power failure cause: no(1) is for no utility failure, outoftolvolt(2) is for voltage out of tolerance, outoftolfreq(3) is for frequency out of tolerance, utilityoff(4) is for no voltage at all. Enumeration: 'outoftolvolt': 2, 'outoftolfreq': 3, 'utilityoff': 4, 'no': 1.
             upsmgOutput 1.3.6.1.4.1.705.1.7
                 upsmgOutputPhaseNum 1.3.6.1.4.1.705.1.7.1 integer read-only
The number of output phases.
                 upsmgOutputPhaseTable 1.3.6.1.4.1.705.1.7.2 no-access
The table of output phases.
                     upsmgOutputPhaseEntry 1.3.6.1.4.1.705.1.7.2.1 no-access
The description of an output phase.
                         mgoutputPhaseIndex 1.3.6.1.4.1.705.1.7.2.1.1 integer read-only
The output phase voltage index. It is a number between 1 and upsmgOutputPhaseNum.
                         mgoutputVoltage 1.3.6.1.4.1.705.1.7.2.1.2 integer read-only
The output phase voltage.
                         mgoutputFrequency 1.3.6.1.4.1.705.1.7.2.1.3 integer read-only
The output phase frequency.
                         mgoutputLoadPerPhase 1.3.6.1.4.1.705.1.7.2.1.4 integer read-only
The output load per phase.
                         mgoutputCurrent 1.3.6.1.4.1.705.1.7.2.1.5 integer read-only
The output phase current.
                 upsmgOutputOnBattery 1.3.6.1.4.1.705.1.7.3 integer read-only
The UPS on battery / on main status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgOutputOnByPass 1.3.6.1.4.1.705.1.7.4 integer read-only
The UPS on bypass status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgOutputUnavailableByPass 1.3.6.1.4.1.705.1.7.5 integer read-only
The by pass unavailable status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgOutputNoByPass 1.3.6.1.4.1.705.1.7.6 integer read-only
The UPS bypass installed status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgOutputUtilityOff 1.3.6.1.4.1.705.1.7.7 integer read-only
The UPS utility off status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgOutputOnBoost 1.3.6.1.4.1.705.1.7.8 integer read-only
The UPS on booster status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgOutputInverterOff 1.3.6.1.4.1.705.1.7.9 integer read-only
The UPS Inverter on / off status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgOutputOverLoad 1.3.6.1.4.1.705.1.7.10 integer read-only
The output over load status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgOutputOverTemp 1.3.6.1.4.1.705.1.7.11 integer read-only
The ups over temperature status. Enumeration: 'yes': 1, 'no': 2.
                 upsmgOutputOnBuck 1.3.6.1.4.1.705.1.7.12 integer read-only
The UPS on fader status.
             upsmgEnviron 1.3.6.1.4.1.705.1.8
                 upsmgEnvironAmbientTemp 1.3.6.1.4.1.705.1.8.1 integer read-only
The ambient temperature.
                 upsmgEnvironAmbientHumidity 1.3.6.1.4.1.705.1.8.2 integer read-only
The ambient humidity.
                 upsmgEnvironExtAlarmTable 1.3.6.1.4.1.705.1.8.3 no-access
The table of external alarms.
                     upsmgEnvironExtAlarmEntry 1.3.6.1.4.1.705.1.8.3.1 no-access
The description of an external alarm.
                         mgalarmNum 1.3.6.1.4.1.705.1.8.3.1.1 integer read-only
The external alarm number. A number between 1 and upsmgConfigExtAlarmNum.
                         mgalarmState 1.3.6.1.4.1.705.1.8.3.1.2 integer read-only
The external alarm state (active or inactive). Enumeration: 'active': 1, 'inactive': 2.
                 upsmgEnvironSensorNum 1.3.6.1.4.1.705.1.8.4 integer read-only
The sensor unit number (0 to 4).
                 upsmgEnvironSensorTable 1.3.6.1.4.1.705.1.8.5 no-access
The table of sensor units.
                     upsmgEnvironSensorEntry 1.3.6.1.4.1.705.1.8.5.1 no-access
The description of a sensor unit.
                         mgsensorNum 1.3.6.1.4.1.705.1.8.5.1.1 integer read-only
The unit number. A number between 1 and 4.
                         mgsensorTemp 1.3.6.1.4.1.705.1.8.5.1.2 integer read-only
The measured temperature of the unit.
                         mgsensorHumidity 1.3.6.1.4.1.705.1.8.5.1.3 integer read-only
The measured humidity of the unit.
                 upsmgEnvironmentNum 1.3.6.1.4.1.705.1.8.6 integer read-only
Number of Environment sensor connected.
                 upsmgEnvironmentSensorTable 1.3.6.1.4.1.705.1.8.7 no-access
The table containing the measurements and alarms made by Environment sensor units.
                     upsmgEnvironmentSensorEntry 1.3.6.1.4.1.705.1.8.7.1 no-access
The description of an entry in the measurement table.
                         upsmgEnvironmentIndex 1.3.6.1.4.1.705.1.8.7.1.1 integer read-only
The sensor index, ranging from 1 to upsmgEnvironmentNum.
                         upsmgEnvironmentComFailure 1.3.6.1.4.1.705.1.8.7.1.2 integer read-only
The sensor communication failure : yes(1), no(2). Enumeration: 'yes': 1, 'no': 2.
                         upsmgEnvironmentTemperature 1.3.6.1.4.1.705.1.8.7.1.3 integer read-only
The temperature measurement in unit 0.1 Cel.
                         upsmgEnvironmentTemperatureLow 1.3.6.1.4.1.705.1.8.7.1.4 integer read-only
Temperature is below low theshold : yes(1), no(2). Enumeration: 'yes': 1, 'no': 2.
                         upsmgEnvironmentTemperatureHigh 1.3.6.1.4.1.705.1.8.7.1.5 integer read-only
Temperature is above high threshold : yes(1), no(2). Enumeration: 'yes': 1, 'no': 2.
                         upsmgEnvironmentHumidity 1.3.6.1.4.1.705.1.8.7.1.6 integer read-only
The humidity measurement in unit 0.1 %.
                         upsmgEnvironmentHumidityLow 1.3.6.1.4.1.705.1.8.7.1.7 integer read-only
Humidity is below low threshold : yes(1), no(2). Enumeration: 'yes': 1, 'no': 2.
                         upsmgEnvironmentHumidityHigh 1.3.6.1.4.1.705.1.8.7.1.8 integer read-only
Humidity is above high threshold : yes(1), no(2). Enumeration: 'yes': 1, 'no': 2.
                         upsmgEnvironmentInput1State 1.3.6.1.4.1.705.1.8.7.1.9 integer read-only
State of Input#1 : closed(1), open(2). Enumeration: 'open': 2, 'closed': 1.
                         upsmgEnvironmentInput2State 1.3.6.1.4.1.705.1.8.7.1.10 integer read-only
State of Input#2 : closed(1), open(2). Enumeration: 'open': 2, 'closed': 1.
             upsmgControl 1.3.6.1.4.1.705.1.9
                 upsmgControlReceptaclesTable 1.3.6.1.4.1.705.1.9.1 no-access
The table of receptacles.
                     upsmgControlReceptaclesEntry 1.3.6.1.4.1.705.1.9.1.1 no-access
The description of a receptacle entry in the table.
                         mgreceptacleIndexc 1.3.6.1.4.1.705.1.9.1.1.1 integer read-only
A unique value for each receptacle. Its value ranges between 1 and the value of upsmgReceptaclesNum.
                         mgreceptacleOnDelay 1.3.6.1.4.1.705.1.9.1.1.2 integer read-write
Turn on UPS receptacle w/delay=?.
                         mgreceptacleOnCtrl 1.3.6.1.4.1.705.1.9.1.1.3 integer read-write
The receptacle control on action. Enumeration: 'nothing': 1, 'start': 2, 'stop': 3.
                         mgreceptacleOnStatus 1.3.6.1.4.1.705.1.9.1.1.4 integer read-only
The receptacle control on status. Enumeration: 'started': 2, 'none': 1, 'completed': 4, 'inprogressinups': 3.
                         mgreceptacleOffDelay 1.3.6.1.4.1.705.1.9.1.1.5 integer read-write
Turn off UPS receptacle w/delay=?.
                         mgreceptacleOffCtrl 1.3.6.1.4.1.705.1.9.1.1.6 integer read-write
The receptacle control off action. Enumeration: 'nothing': 1, 'start': 2, 'stop': 3.
                         mgreceptacleOffStatus 1.3.6.1.4.1.705.1.9.1.1.7 integer read-only
The receptacle control off status. Enumeration: 'started': 2, 'none': 1, 'completed': 4, 'inprogressinups': 3.
                         mgreceptacleToggleDelay 1.3.6.1.4.1.705.1.9.1.1.8 integer read-write
Turn off then on UPS receptacle w/delay=?.
                         mgreceptacleToggleCtrl 1.3.6.1.4.1.705.1.9.1.1.9 integer read-write
The receptacle control toggle action. Enumeration: 'nothing': 1, 'start': 2, 'stop': 3.
                         mgreceptacleToggleStatus 1.3.6.1.4.1.705.1.9.1.1.10 integer read-only
The receptacle control toggle status. Enumeration: 'started': 2, 'none': 1, 'completed': 4, 'inprogressinups': 3.
                         mgreceptacleToggleDuration 1.3.6.1.4.1.705.1.9.1.1.11 integer read-write
Turn off then on UPS receptacle w/duration=?.
                 upsmgControlDayOff 1.3.6.1.4.1.705.1.9.2 integer read-write
The schedule off control object. Default value is none(8). Value 1 means to start scheduled off on Sunday, value 2 to start scheduled off on Monday, and so on. Enumeration: 'none': 8, 'monday': 2, 'tuesday': 3, 'friday': 6, 'wednesday': 4, 'thursday': 5, 'saterday': 7, 'sunday': 1.
                 upsmgControlDayOn 1.3.6.1.4.1.705.1.9.3 integer read-write
The schedule on control object. Default value is none(8). Value 1 means to start scheduled on on Sunday, value 2 to start scheduled on on Monday, and so on. This object is meaningfull only for those agent that do not include internal clock. In such a case the object is set by a manager to start the schedule on sequence. Enumeration: 'none': 8, 'monday': 2, 'tuesday': 3, 'friday': 6, 'wednesday': 4, 'thursday': 5, 'saterday': 7, 'sunday': 1.
             upsmgTest 1.3.6.1.4.1.705.1.10
                   upsmgTestBatterySchedule 1.3.6.1.4.1.705.1.10.1 integer read-write
The automatic battery test schedule. Enumeration: 'none': 5, 'monthly': 3, 'unknown': 1, 'atturnon': 4, 'dayly': 6, 'weekly': 2.
                   upsmgTestDiagnostics 1.3.6.1.4.1.705.1.10.2 integer read-write
To run self test diagnostics. Enumeration: 'default': 1, 'start': 2.
                   upsmgTestDiagResult 1.3.6.1.4.1.705.1.10.3 integer read-only
The automatic test diagnostic result. Enumeration: 'failed': 2, 'none': 3, 'success': 1.
                   upsmgTestBatteryCalibration 1.3.6.1.4.1.705.1.10.4 integer read-write
To run battery test calibration. Enumeration: 'default': 1, 'start': 2.
                   upsmgTestLastCalibration 1.3.6.1.4.1.705.1.10.5 integer read-only
The last battery calibration test date.
                   upsmgTestIndicators 1.3.6.1.4.1.705.1.10.6 integer read-write
To run UPS indicators test.
                   upsmgTestCommandLine 1.3.6.1.4.1.705.1.10.7 displaystring read-write
To send ASCII command line to UPS.
                   upsmgTestCommandReady 1.3.6.1.4.1.705.1.10.8 integer read-write
To advise UPS that command line has been prepared. Enumeration: 'yes': 1, 'no': 2.
                   upsmgTestResponseLine 1.3.6.1.4.1.705.1.10.9 displaystring read-only
To get ASCII protocol response from UPS.
                   upsmgTestResponseReady 1.3.6.1.4.1.705.1.10.10 integer read-only
To advise agent that response line has been received. Enumeration: 'yes': 1, 'no': 2.
                   upsmgTestBatteryResult 1.3.6.1.4.1.705.1.10.11 integer read-only
The test battery result: msuccess(1) is for manual battery test success, ssuccess(3) is for scheduled battery test success, mfailed(2) is for manual battery test failed, sfailed(4) is for scheduled battery test failed. Enumeration: 'mfailed': 2, 'none': 5, 'ssuccess': 3, 'msuccess': 1, 'sfailed': 4.
             upsmgTraps 1.3.6.1.4.1.705.1.11
             upsmgAgent 1.3.6.1.4.1.705.1.12
                   upsmgAgentIpaddress 1.3.6.1.4.1.705.1.12.1 ipaddress read-write
The ip address that NMS can identify the managed device
                   upsmgAgentSubnetMask 1.3.6.1.4.1.705.1.12.2 ipaddress read-write
Internet address subnet mask
                   upsmgAgentDefGateway 1.3.6.1.4.1.705.1.12.3 ipaddress read-write
The default gateway that allow device managed through routers
                   upsmgAgentBaudRate 1.3.6.1.4.1.705.1.12.4 integer read-write
the serial port communication speed. only 2400, 4800, and 9600 allowed
                   upsmgAgentPollRate 1.3.6.1.4.1.705.1.12.5 integer read-write
The frequency that proxy agent polls the connected UPS in ASCII protocol. (unit : second)
                   upsmgAgentType 1.3.6.1.4.1.705.1.12.6 integer read-write
The type of agent. Enumeration: 'deviceTR': 2, 'proxyEth': 3, 'deviceEth': 1, 'other': 5, 'proxyTR': 4.
                   upsmgAgentTrapAlarmDelay 1.3.6.1.4.1.705.1.12.7 integer read-write
The interval for the Trap packet retransmission, while the TRAP Acknowledge is implemented and the ack is received within the interval.
                   upsmgAgentTrapAlarmRetry 1.3.6.1.4.1.705.1.12.8 integer read-write
The retry count for retransmitting Trap packet while the TRAP acknowledge is implemented.
                   upsmgAgentReset 1.3.6.1.4.1.705.1.12.9 integer read-write
The variable initiates reset operation in agent software, ie. warm start. write reset(1) to any one of UPS MIB array, will result in the same reset operation. Enumeration: 'reset': 1, 'nothing': 2.
                   upsmgAgentFactReset 1.3.6.1.4.1.705.1.12.10 integer read-write
The variable initiates reset operation in agent software, ie. warm start, and load default data (Factory setting) to EEPROM and to runtime parameters associated with the UPS. Enumeration: 'reset': 1, 'nothing': 2.
                   upsmgAgentMibVersion 1.3.6.1.4.1.705.1.12.11 integer read-only
The version of the MIB implemented in agent.
                   upsmgAgentFirmwareVersion 1.3.6.1.4.1.705.1.12.12 displaystring read-only
The agent firmware version.
                   upsmgAgentCommUPS 1.3.6.1.4.1.705.1.12.13 integer read-only
The status of communication between agent and ups. Even value means no communication, and odd value means a certain level of communication with devices daisy-chained on the serial port. The value is the following: 1000*NSE + 100*NSW + 10*UPSW + UPST with UPST is UPS type: 5 if no UPS; 3 if PI (Protocol Interface) 1 if U-Talk UPS; UPSW is the number of switchable plugs of the UPS; NSW is the number of UM-Switch devices; NSE is the number of UM-Sensor devices.
                   upsmgAgentTrapAck 1.3.6.1.4.1.705.1.12.14 integer read-write
The last Trap number that has been received by UM-View.
                   upsmgAgentAutoLearning 1.3.6.1.4.1.705.1.12.15 integer read-write
The enabled/disabled configuration of the Auto Learning process of the agent, default value is yes(1) e.g. enabled. Enumeration: 'yes': 1, 'no': 2.
                   upsmgAgentBootP 1.3.6.1.4.1.705.1.12.16 integer read-write
The enabled/disabled configuration of the BootP process, default value is yes(1) e.g. enabled. Enumeration: 'yes': 1, 'no': 2.
                   upsmgAgentTFTP 1.3.6.1.4.1.705.1.12.17 integer read-write
The enabled/disabled configuration of the TFTP process, default value is no(2) e.g. disabled. Enumeration: 'yes': 1, 'no': 2.
                   upsmgAgentTrapSignature 1.3.6.1.4.1.705.1.12.18 integer read-only
The signature of the trap acknowledged by a manager.
             upsmgRemote 1.3.6.1.4.1.705.1.13
                   upsmgRemoteOnBattery 1.3.6.1.4.1.705.1.13.1 integer read-write
An object to inform an ups-less agent that the remote UPS is on autonomy. This object could be set by a management application.
                   upsmgRemoteIpAddress 1.3.6.1.4.1.705.1.13.2 ipaddress read-write
An object to give the IP address of the agent managing the remote UPS. This object could be read by managers to perform management of receptacle dependencies between two different agents.
                     upsmgBatteryFault 1.3.6.1.4.1.705.1.110.1
Trap UPS Battery entering Fault status.
                     upsmgBatteryOK 1.3.6.1.4.1.705.1.110.2
Trap UPS Battery returned to OK status.
                     upsmgBatteryReplacementIndicated 1.3.6.1.4.1.705.1.110.3
Trap UPS battery need to be replaced.
                     upsmgBatteryReplaceNotIndicated 1.3.6.1.4.1.705.1.110.4
Trap UPS battery does not need to be replaced.
                     upsmgAtLowBattery 1.3.6.1.4.1.705.1.110.5
Trap UPS battery reached low condition.
                     upsmgFromLowBattery 1.3.6.1.4.1.705.1.110.6
Trap UPS battery returned from low condition.
                     upsmgChargerFault 1.3.6.1.4.1.705.1.110.7
Trap UPS battery charger is not active.
                     upsmgChargerOK 1.3.6.1.4.1.705.1.110.8
Trap UPS battery charger is active.
                     upsmgAtLowCondition 1.3.6.1.4.1.705.1.110.9
Trap UPS entering low condition.
                     upsmgFromLowCondition 1.3.6.1.4.1.705.1.110.10
Trap UPS exiting low condition.
                     upsmgOnBattery 1.3.6.1.4.1.705.1.110.11
Trap UPS is on Battery.
                     upsmgReturnFromBattery 1.3.6.1.4.1.705.1.110.12
Trap UPS returned from battery.
                     upsmgOnByPass 1.3.6.1.4.1.705.1.110.13
Trap UPS is on by pass.
                     upsmgReturnFromByPass 1.3.6.1.4.1.705.1.110.14
Trap UPS return from by pass.
                     upsmgByPassUnavailable 1.3.6.1.4.1.705.1.110.15
Trap UPS by pass unavailable.
                     upsmgByPassAvailable 1.3.6.1.4.1.705.1.110.16
Trap UPS by pass available.
                     upsmgUtilityFailure 1.3.6.1.4.1.705.1.110.17
Trap UPS utility power failed.
                     upsmgUtilityRestored 1.3.6.1.4.1.705.1.110.18
Trap UPS utility power restored.
                     upsmgOnBoost 1.3.6.1.4.1.705.1.110.19
Trap UPS is on boost.
                     upsmgReturnFromBoost 1.3.6.1.4.1.705.1.110.20
Trap UPS has returned from boost.
                     upsmgOverLoad 1.3.6.1.4.1.705.1.110.21
Trap UPS has overload condition.
                     upsmgLoadOK 1.3.6.1.4.1.705.1.110.22
Trap UPS quit overload condition.
                     upsmgOverTemperature 1.3.6.1.4.1.705.1.110.23
Trap UPS has overtemperature condition.
                     upsmgTemperatureOK 1.3.6.1.4.1.705.1.110.24
Trap UPS quit overtemperature condition.
                     upsmgOnToStart 1.3.6.1.4.1.705.1.110.25
Trap UPS on sequence started.
                     upsmgOnAbort 1.3.6.1.4.1.705.1.110.26
Trap UPS on sequence cancelled.
                     upsmgOnInProgress 1.3.6.1.4.1.705.1.110.27
Trap UPS on sequence in progress in ups.
                     upsmgOnComplete 1.3.6.1.4.1.705.1.110.28
Trap UPS on sequence completed.
                     upsmgOffToStart 1.3.6.1.4.1.705.1.110.29
Trap UPS off sequence started.
                     upsmgOffAbort 1.3.6.1.4.1.705.1.110.30
Trap UPS off sequence cancelled.
                     upsmgOffInProgress 1.3.6.1.4.1.705.1.110.31
Trap UPS off sequence in progress in ups.
                     upsmgOffComplete 1.3.6.1.4.1.705.1.110.32
Trap UPS off sequence completed.
                     upsmgToggleToStart 1.3.6.1.4.1.705.1.110.33
Trap UPS toggle (off/on) sequence started.
                     upsmgToggleAbort 1.3.6.1.4.1.705.1.110.34
Trap UPS toggle (off/on) sequence cancelled.
                     upsmgToggleInProgress 1.3.6.1.4.1.705.1.110.35
Trap UPS toggle (off/on) sequence in progress in ups.
                     upsmgToggleComplete 1.3.6.1.4.1.705.1.110.36
Trap UPS toggle (off/on) sequence completed.
                     upsmgCommunicationFailure 1.3.6.1.4.1.705.1.110.37
Trap UPS serial communication failed.
                     upsmgCommunicationRestored 1.3.6.1.4.1.705.1.110.38
Trap UPS serial communication restored.
                     upsmgInputBad 1.3.6.1.4.1.705.1.110.39
Trap UPS input has bad condition.
                     upsmgInputOK 1.3.6.1.4.1.705.1.110.40
Trap UPS input quit bad condition.
                     upsmgBatteryUnavailable 1.3.6.1.4.1.705.1.110.41
Trap UPS battery is unavailable.
                     upsmgBatteryAvailable 1.3.6.1.4.1.705.1.110.42
Trap UPS battery return from unavailable condition.
                     upsmgAtLowRecharge 1.3.6.1.4.1.705.1.110.43
Trap UPS waiting for battery charging condition.
                     upsmgFromLowRecharge 1.3.6.1.4.1.705.1.110.44
Trap UPS reached battery charging condition.
                     upsmgDiagnosticTestFail 1.3.6.1.4.1.705.1.110.45
Trap UPS self test failed.
                     upsmgDiagnosticTestOK 1.3.6.1.4.1.705.1.110.46
Trap UPS self test succeeded.
                     upsmgBatteryTestOK 1.3.6.1.4.1.705.1.110.47
Trap UPS passed battery test.
                     upsmgBatteryTestFail 1.3.6.1.4.1.705.1.110.48
Trap UPS failed battery test.
                     upsmgExternalAlarmActive 1.3.6.1.4.1.705.1.110.49
Trap UPS enter environment external alarm.
                     upsmgExternalAlarmInactive 1.3.6.1.4.1.705.1.110.50
Trap UPS exit environment external alarm.
                     upsmgOnBuck 1.3.6.1.4.1.705.1.110.51
Trap UPS is on buck.
                     upsmgReturnFromBuck 1.3.6.1.4.1.705.1.110.52
Trap UPS has returned from buck.
                     upsmgEnvironComFailure 1.3.6.1.4.1.705.1.110.53
Environment Probe communication failure.
                     upsmgEnvironComOK 1.3.6.1.4.1.705.1.110.54
Environment Probe communication restored.
                     upsmgEnvironTemperatureLow 1.3.6.1.4.1.705.1.110.55
Temperature is below low threshold.
                     upsmgEnvironTemperatureHigh 1.3.6.1.4.1.705.1.110.56
Temperature is above high threshold.
                     upsmgEnvironTemperatureOK 1.3.6.1.4.1.705.1.110.57
Temperature is in normal range.
                     upsmgEnvironHumidityLow 1.3.6.1.4.1.705.1.110.58
Humidity is below low threshold.
                     upsmgEnvironHumidityHigh 1.3.6.1.4.1.705.1.110.59
Humidity is above high threshold.
                     upsmgEnvironHumidityOK 1.3.6.1.4.1.705.1.110.60
Humidity is in normal range.
                     upsmgEnvironInput1Closed 1.3.6.1.4.1.705.1.110.61
Input #1 is Closed.
                     upsmgEnvironInput1Open 1.3.6.1.4.1.705.1.110.62
Input #1 is Open.
                     upsmgEnvironInput2Closed 1.3.6.1.4.1.705.1.110.63
Input #2 is Closed.
                     upsmgEnvironInput2Open 1.3.6.1.4.1.705.1.110.64
Input #2 is Open.