MBG-SNMP-LTNG-MIB: View SNMP OID List / Download MIB

VENDOR: MEINBERG


 Home MIB: MBG-SNMP-LTNG-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, MBG-SNMP-ROOT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 mbgLantimeNG 1.3.6.1.4.1.5597.30
Meinberg LANTIME SNMP Management Information Base
       mbgLantimeNGStatus 1.3.6.1.4.1.5597.30.0
           mbgLtNgInfo 1.3.6.1.4.1.5597.30.0.0
               mbgLtNgSnmpSubagentVersion 1.3.6.1.4.1.5597.30.0.0.1 displaystring read-only
version of this SNMP subagent
               mbgLtNgFirmwareVersion 1.3.6.1.4.1.5597.30.0.0.2 displaystring read-only
installed LANTIME firmware version
               mbgLtNgSerialNumber 1.3.6.1.4.1.5597.30.0.0.3 displaystring read-only
LANTIME serial number
               mbgLtNgSubagentTimeticks 1.3.6.1.4.1.5597.30.0.0.4 counter64 read-only
Subdaemons' time alive in seconds
               mbgLtNgCpuSerialNumber 1.3.6.1.4.1.5597.30.0.0.5 displaystring read-only
CPU's serial number
           mbgLtNgRefclock 1.3.6.1.4.1.5597.30.0.1
               mbgLtNgNumberOfRefclocks 1.3.6.1.4.1.5597.30.0.1.1 unsigned32 read-only
currently installed number of refclocks
               mbgLtNgRefclockTable 1.3.6.1.4.1.5597.30.0.1.2 no-access
a table of refclock related variables
                   mbgLtNgRefclockTableEntry 1.3.6.1.4.1.5597.30.0.1.2.1 no-access
a list of objects pertaining to a refclock
                       mbgLtNgRefclockIndex 1.3.6.1.4.1.5597.30.0.1.2.1.1 unsigned32 no-access
index for refclock
                       mbgLtNgRefclockType 1.3.6.1.4.1.5597.30.0.1.2.1.2 integer read-only
type of refclock Enumeration: 'dcf600RS': 47, 'esi180': 41, 'gln180Pex': 50, 'gps167SV': 3, 'spt': 59, 'tcr170PEX': 24, 'mri': 48, 'gps180': 30, 'ptp270PEX': 21, 'gps164': 11, 'gps167': 2, 'gps166': 1, 'gps161': 8, 'gps163': 6, 'gps162': 20, 'pzf511': 13, 'mgr180': 35, 'gps168PCI': 7, 'unknown': 0, 'rel1000': 61, 'fdm180': 58, 'am511': 16, 'li': 45, 'lnePpg180': 54, 'msf600': 36, 'wwvb600': 37, 'tcr511': 15, 'mdu300': 56, 'scg': 55, 'tcr167PCI': 10, 'grc180': 44, 'frc511PEX': 22, 'gps167PC': 4, 'gps180PEX': 32, 'lno180': 43, 'pzf180': 60, 'mgr170': 26, 'gps169PCI': 9, 'gen170': 23, 'tcr600': 29, 'msf511': 17, 'grc170': 18, 'sdi': 57, 'gps170': 14, 'gps170PCI': 12, 'rsc180': 52, 'bpe': 49, 'lneGb': 53, 'pzf600': 28, 'jjy511': 27, 'jjy600': 38, 'gps167PCI': 5, 'wwvb511': 25, 'gps180AMC': 40, 'gln170': 31, 'tcr180PEX': 33, 'n2x': 51, 'gps180HS': 39, 'gps170PEX': 19, 'cpe180': 42, 'dcf600HS': 46, 'pzf180PEX': 34.
                       mbgLtNgRefclockUsage 1.3.6.1.4.1.5597.30.0.1.2.1.3 integer read-only
what this refclock is used for Enumeration: 'notAvailable': 0, 'compare': 2, 'primary': 3, 'secondary': 1.
                       mbgLtNgRefclockState 1.3.6.1.4.1.5597.30.0.1.2.1.4 integer read-only
state of GPS refclock conneted to NTP time server as value 0: not available 1: synchronized 2: not synchronized Enumeration: 'notAvailable': 0, 'notSynchronized': 2, 'synchronized': 1.
                       mbgLtNgRefclockSubstate 1.3.6.1.4.1.5597.30.0.1.2.1.5 integer read-only
more detailed state depending on refclock type 0: no substate available gps: 1-4 long waves (PZF,WWVB,MSF,...): 50-52 (not supported by all types) irig: 100-101 Enumeration: 'mrsPpsStringSync': 159, 'mrsFixedFreqInSync': 158, 'tcrSync': 101, 'mrs10MhzSync': 151, 'gpsAntennaShortCircuit': 6, 'mrsPtpIeee1588Sync': 156, 'mrsExtOscSync': 166, 'mrsReserved': 161, 'mrsPtpOverE1Sync': 157, 'mrsPpsInSync': 152, 'mrsIrigSync': 154, 'mrsVarFreqGpioSync': 160, 'lwSync': 52, 'gpsSync': 1, 'mrsDcf77PzfSync': 162, 'tcrNotSync': 100, 'mrs10MhzPpsInSync': 153, 'notAvailable': 0, 'gpsWarmBoot': 4, 'mrsNtpSync': 155, 'mrsLongwaveSync': 163, 'lwNeverSync': 50, 'mrsHavequickSync': 165, 'gpsAntennaDisconnected': 3, 'mrsGpsSync': 150, 'mrsIntOscSync': 167, 'gpsTracking': 2, 'lwNotSync': 51, 'mrsGlonassGpsSync': 164, 'gpsColdBoot': 5, 'mrsRefNone': -1.
                       mbgLtNgRefclockStatusA 1.3.6.1.4.1.5597.30.0.1.2.1.6 unsigned32 read-only
status A depending on reflcock gps : indicates number of good satellites in view long wave - pzf : correlation - other : not supported irig : not supported
                       mbgLtNgRefclockMaxStatusA 1.3.6.1.4.1.5597.30.0.1.2.1.7 unsigned32 read-only
maximum status A depending on reflcock gps : indicates number of satellites in view long wave - pzf : 100 - other : not supported irig : not supported
                       mbgLtNgRefclockStatusB 1.3.6.1.4.1.5597.30.0.1.2.1.8 unsigned32 read-only
maximum status B depending on reflcock gps : not supported long wave - all : field strength irig : not supported
                       mbgLtNgRefclockMaxStatusB 1.3.6.1.4.1.5597.30.0.1.2.1.9 unsigned32 read-only
maximum status B depending on reflcock gps : not supported long wave - all : 100 irig : not supported
                       mbgLtNgRefclockAdditionalInfo 1.3.6.1.4.1.5597.30.0.1.2.1.10 integer read-only
any kind of additional information concerning a refclock Enumeration: 'notAvailable': 0, 'leapSecondAnnounced': 1.
                       mbgLtNgRefclockLeapSecondDate 1.3.6.1.4.1.5597.30.0.1.2.1.11 displaystring read-only
Date for next leap second
               mbgLtNgRefclockGpsTable 1.3.6.1.4.1.5597.30.0.1.3 no-access
a table of gps only related variables
                   mbgLtNgRefclockGpsTableEntry 1.3.6.1.4.1.5597.30.0.1.3.1 no-access
a list of objects pertaining to a GPS refclock
                       mbgLtNgRefclockGpsIndex 1.3.6.1.4.1.5597.30.0.1.3.1.1 unsigned32 no-access
index for GPS
                       mbgLtNgRefclockGpsLatitude 1.3.6.1.4.1.5597.30.0.1.3.1.2 displaystring read-only
GPS' latitude
                       mbgLtNgRefclockGpsLongitude 1.3.6.1.4.1.5597.30.0.1.3.1.3 displaystring read-only
GPS' longitude
                       mbgLtNgRefclockGpsAltitude 1.3.6.1.4.1.5597.30.0.1.3.1.4 integer32 read-only
GPS' altitude
                       mbgLtNgRefclockGpsTdop 1.3.6.1.4.1.5597.30.0.1.3.1.5 displaystring read-only
GPS' timing dillution of precision
                       mbgLtNgRefclockGpsPdop 1.3.6.1.4.1.5597.30.0.1.3.1.6 displaystring read-only
GPS' positional dillution of precision
                       mbgLtNgRefclockGpsUtcOffset 1.3.6.1.4.1.5597.30.0.1.3.1.7 integer32 read-only
GPS' offset to UTC in seconds
               mbgLtNgRefclockTimeDiff 1.3.6.1.4.1.5597.30.0.1.4 integer32 read-only
when there is more than one refclock this object shows the internal time difference in milliseconds
               mbgLtNgRefclockGpsPos 1.3.6.1.4.1.5597.30.0.1.5 displaystring read-only
shows current GPS receiver position
           mbgLtNgNtp 1.3.6.1.4.1.5597.30.0.2
               mbgLtNgNtpCurrentState 1.3.6.1.4.1.5597.30.0.2.1 integer read-only
Current NTP's synchronization status Enumeration: 'notAvailable': 0, 'notSynchronized': 1, 'synchronized': 2.
               mbgLtNgNtpStratum 1.3.6.1.4.1.5597.30.0.2.2 integer32 read-only
Stratum value of the NTP
               mbgLtNgNtpRefclockName 1.3.6.1.4.1.5597.30.0.2.3 displaystring read-only
Name of the current refclock selected by the NTP
               mbgLtNgNtpRefclockOffset 1.3.6.1.4.1.5597.30.0.2.4 displaystring read-only
Time offset between the current selected refclock and time of NTP as string in milliseconds
               mbgLtNgNtpVersion 1.3.6.1.4.1.5597.30.0.2.5 displaystring read-only
integrated NTP version
               mbgLtNgNtpClientCounter 1.3.6.1.4.1.5597.30.0.2.8
                   mbgLtNgNtpCCStartedAt 1.3.6.1.4.1.5597.30.0.2.8.1 counter64 read-only
start time of current NTP client counter session as timestamp
                   mbgLtNgNtpCCDuration 1.3.6.1.4.1.5597.30.0.2.8.2 unsigned32 read-only
total duration of NTP client counter in seconds
                   mbgLtNgNtpCCNumberOfClients 1.3.6.1.4.1.5597.30.0.2.8.3 unsigned32 read-only
total number of different clients requesting time
                   mbgLtNgNtpCCTotalRequests 1.3.6.1.4.1.5597.30.0.2.8.4 counter64 read-only
total requests since starting the daemon
                   mbgLtNgNtpCCTotalRequestsCurrentDay 1.3.6.1.4.1.5597.30.0.2.8.5 counter64 read-only
today's total requests
                   mbgLtNgNtpCCTotalRequestsLastHour 1.3.6.1.4.1.5597.30.0.2.8.6 counter64 read-only
today's requests within the last completed hour
                   mbgLtNgNtpCCTotalRequestsLastMinute 1.3.6.1.4.1.5597.30.0.2.8.7 counter64 read-only
today's requests within the last completed minute
                   mbgLtNgNtpCCTodaysClients 1.3.6.1.4.1.5597.30.0.2.8.8 unsigned32 read-only
today's number of different clients requesting time
               mbgLtNgNtpMrs 1.3.6.1.4.1.5597.30.0.2.9
                   mbgLtNgNtpMrsServer 1.3.6.1.4.1.5597.30.0.2.9.1 displaystring read-only
external NTP server being used for synchronization
                   mbgLtNgNtpMrsOffset 1.3.6.1.4.1.5597.30.0.2.9.2 displaystring read-only
external NTP server's offset
           mbgLtNgPtp 1.3.6.1.4.1.5597.30.0.3
               mbgLtNgPtpNumberOfModules 1.3.6.1.4.1.5597.30.0.3.1 unsigned32 read-only
number of available PTPv2 modules
               mbgLtNgPtpTable 1.3.6.1.4.1.5597.30.0.3.2 no-access
a table of PTPv2 related variables
                   mbgLtNgPtpTableEntry 1.3.6.1.4.1.5597.30.0.3.2.1 no-access
a list of objects pertaining to a PTPv2 module
                       mbgLtNgPtpIndex 1.3.6.1.4.1.5597.30.0.3.2.1.1 unsigned32 no-access
index for PTPv2 module
                       mbgLtNgPtpMode 1.3.6.1.4.1.5597.30.0.3.2.1.2 integer read-only
PTPv2 modus as integer. This object is obsolete and always returns '0'. Please see alternates mbgLtNgPtpPortState and mbgLtNgPtpRole. Enumeration: 'notAvailable': 0, 'master': 2, 'ordinary': 4, 'stopped': 1, 'slave': 3.
                       mbgLtNgPtpPortState 1.3.6.1.4.1.5597.30.0.3.2.1.3 integer read-only
port state as integer Enumeration: 'uninitialized': 0, 'passive': 7, 'slave': 9, 'preMaster': 5, 'disabled': 3, 'uncalibrated': 8, 'master': 6, 'listening': 4, 'initializing': 1, 'faulty': 2.
                       mbgLtNgPtpGrandmasterMac 1.3.6.1.4.1.5597.30.0.3.2.1.4 displaystring read-only
MAC address of current grandmaster
                       mbgLtNgPtpClockAccuracy 1.3.6.1.4.1.5597.30.0.3.2.1.5 integer read-only
indicates the source of time Enumeration: 'timeAccurateTo2to5ms': 42, 'timeAccurateTo1us': 35, 'timeAccurateToGT10s': 49, 'timeAccurateTo2Point5us': 36, 'timeAccurateTo10ms': 43, 'timeAccurateToUnknown': 254, 'timeAccurateTo1ms': 41, 'timeAccurateTo250us': 40, 'timeAccurateTo10s': 48, 'timeAccurateTo25ns': 32, 'timeAccurateTo10us': 37, 'timeAccurateTo100ms': 45, 'timeAccurateTo100us': 39, 'timeAccurateTo25ms': 44, 'timeAccurateTo250ms': 46, 'timeAccurateTo1s': 47, 'notAvailable': 0, 'timeAccurateTo100ns': 33, 'timeAccurateTo25us': 38, 'timeAccurateTo250ns': 34.
                       mbgLtNgPtpClockClass 1.3.6.1.4.1.5597.30.0.3.2.1.6 unsigned32 read-only
denotes the traceability of the time or frequency
                       mbgLtNgPtpTimeSource 1.3.6.1.4.1.5597.30.0.3.2.1.7 integer read-only
source of time being used Enumeration: 'atomicClock': 16, 'ntp': 80, 'handSet': 96, 'internalOscillator': 160, 'terrestrialRadio': 48, 'other': 144, 'notAvailable': 0, 'gps': 32, 'ptp': 64.
                       mbgLtNgPtpUtcOffset 1.3.6.1.4.1.5597.30.0.3.2.1.8 unsigned32 read-only
offset from PTP's TAI time to UTC time
                       mbgLtNgPtpTimeSeconds 1.3.6.1.4.1.5597.30.0.3.2.1.9 counter64 read-only
PTP seconds
                       mbgLtNgPtpTsuTime 1.3.6.1.4.1.5597.30.0.3.2.1.10 displaystring read-only
current time on PTP TSU
                       mbgLtNgPtpSysTime 1.3.6.1.4.1.5597.30.0.3.2.1.11 displaystring read-only
current system time
                       mbgLtNgPtpPortLinkup 1.3.6.1.4.1.5597.30.0.3.2.1.12 meinbergswitch read-only
PTP port's physical link-up
                       mbgLtNgPtpOffsetFromGM 1.3.6.1.4.1.5597.30.0.3.2.1.13 displaystring read-only
offset from grandmaster in nanoseconds
                       mbgLtNgPtpPathDelay 1.3.6.1.4.1.5597.30.0.3.2.1.14 displaystring read-only
network delay in nanoseconds
                       mbgLtNgPtpDelayMec 1.3.6.1.4.1.5597.30.0.3.2.1.15 integer read-only
delay mechanism Enumeration: 'end2End': 0, 'peer2Peer': 1.
                       mbgLtNgPtpDomain 1.3.6.1.4.1.5597.30.0.3.2.1.16 unsigned32 read-only
domain number
                       mbgLtNgPtpGrandmasterUuid 1.3.6.1.4.1.5597.30.0.3.2.1.17 displaystring read-only
grandmaster uuid
                       mbgLtNgPtpLocalMac 1.3.6.1.4.1.5597.30.0.3.2.1.18 displaystring read-only
local MAC address
                       mbgLtNgPtpDelayAsymmetry 1.3.6.1.4.1.5597.30.0.3.2.1.19 displaystring read-only
asymmetric network delay in nanoseconds
                       mbgLtNgPtpAvail 1.3.6.1.4.1.5597.30.0.3.2.1.20 integer read-only
Signals whether PTP instance is avail or not Enumeration: 'yes': 1, 'no': 0.
           mbgLtNgFdm 1.3.6.1.4.1.5597.30.0.4
               mbgLtNgFdmFreq 1.3.6.1.4.1.5597.30.0.4.1 unsigned32 read-only
powerline frequency in mHz; 0 indicates that no data is available
               mbgLtNgFdmFreqDev 1.3.6.1.4.1.5597.30.0.4.2 integer32 read-only
frequency deviation in mHz depending on the configured nominal frequency; check 'mbgLtNgFdmFreq' for error
               mbgLtNgFdmNomFreq 1.3.6.1.4.1.5597.30.0.4.3 unsigned32 read-only
nominal frequency in mHz; can be 50000 (50Hz) or 60000 (60Hz); 0 indicates that no value is configured
           mbgLtNgSystemHardware 1.3.6.1.4.1.5597.30.0.5
               mbgLtNgSysPowerSupply 1.3.6.1.4.1.5597.30.0.5.0
                   mbgLtNgSysNumberOfPowerSupplies 1.3.6.1.4.1.5597.30.0.5.0.1 unsigned32 read-only
number of available power supplies
                   mbgLtNgSysPsTable 1.3.6.1.4.1.5597.30.0.5.0.2 no-access
a table of power supply stati
                       mbgLtNgSysPsTableEntry 1.3.6.1.4.1.5597.30.0.5.0.2.1 no-access
a list of objects pertaining to power supplies
                           mbgLtNgSysPsIndex 1.3.6.1.4.1.5597.30.0.5.0.2.1.1 unsigned32 no-access
index of power supply
                           mbgLtNgSysPsStatus 1.3.6.1.4.1.5597.30.0.5.0.2.1.2 integer read-only
Status of power supply Enumeration: 'notAvailable': 0, 'down': 1, 'up': 2.
               mbgLtNgSysFan 1.3.6.1.4.1.5597.30.0.5.1
                   mbgLtNgSysNumberOfFans 1.3.6.1.4.1.5597.30.0.5.1.1 unsigned32 read-only
number of available fans
                   mbgLtNgSysFanTable 1.3.6.1.4.1.5597.30.0.5.1.2 no-access
a table of power supply stati
                       mbgLtNgSysFanTableEntry 1.3.6.1.4.1.5597.30.0.5.1.2.1 no-access
a list of objects pertaining to fans
                           mbgLtNgSysFanIndex 1.3.6.1.4.1.5597.30.0.5.1.2.1.1 unsigned32 no-access
index of fan
                           mbgLtNgSysFanStatus 1.3.6.1.4.1.5597.30.0.5.1.2.1.2 integer read-only
Status of fan Enumeration: 'notAvailable': 0, 'on': 2, 'off': 1.
                           mbgLtNgSysFanError 1.3.6.1.4.1.5597.30.0.5.1.2.1.3 integer read-only
fan's error field Enumeration: 'notAvailable': 0, 'yes': 2, 'no': 1.
               mbgLtNgSysTemperature 1.3.6.1.4.1.5597.30.0.5.2
                   mbgLtNgSysTempCelsius 1.3.6.1.4.1.5597.30.0.5.2.1 unsigned32 read-only
temperature in degree Celsius
           mbgLtNgCluster 1.3.6.1.4.1.5597.30.0.6
               mbgLtNgNumberOfClusters 1.3.6.1.4.1.5597.30.0.6.1 unsigned32 read-only
number of active running clusters
               mbgLtNgClusterTable 1.3.6.1.4.1.5597.30.0.6.2 no-access
a table of cluster status information
                   mbgLtNgClusterTableEntry 1.3.6.1.4.1.5597.30.0.6.2.1 no-access
a list of objects pertaining to running and active clusters
                       mbgLtNgClusterIndex 1.3.6.1.4.1.5597.30.0.6.2.1.1 unsigned32 no-access
index of power supply
                       mbgLtNgClusterCommunicationIp 1.3.6.1.4.1.5597.30.0.6.2.1.2 displaystring read-only
ip of cluster interface
                       mbgLtNgClusterPortState 1.3.6.1.4.1.5597.30.0.6.2.1.3 integer read-only
state of cluster Enumeration: 'notAvailable': 0, 'slave': 2, 'master': 1, 'listening': 3.
                       mbgLtNgClusterMasterSerial 1.3.6.1.4.1.5597.30.0.6.2.1.4 displaystring read-only
serial number of cluster's master
                       mbgLtNgClusterMasterIp 1.3.6.1.4.1.5597.30.0.6.2.1.5 displaystring read-only
ip address of cluster's master
                       mbgLtNgClusterMasterPriority 1.3.6.1.4.1.5597.30.0.6.2.1.6 unsigned32 read-only
priority of cluster master
                       mbgLtNgClusterClockClass 1.3.6.1.4.1.5597.30.0.6.2.1.7 integer read-only
reference's clock class Enumeration: 'rdt': 11, 'ptp': 8, 'ntp': 9, 'am': 5, 'pps': 7, 'irig': 6, 'notAvailable': 0, 'pzf': 4, 'e1': 10, 'gps': 3.
                       mbgLtNgClusterClockStatus 1.3.6.1.4.1.5597.30.0.6.2.1.8 integer read-only
reference's clock status Enumeration: 'notAvailable': 0, 'freeRunningOrTracking': 2, 'antennaFailure': 3, 'invalid': 4, 'normalOperation': 1.
                       mbgLtNgClusterReconfigurationState 1.3.6.1.4.1.5597.30.0.6.2.1.9 integer read-only
current reconfiguration state Enumeration: 'notAvailable': 0, 'slaveToMaster': 3, 'masterToSlave': 2, 'normal': 1.
                       mbgLtNgClusterIsFalseticker 1.3.6.1.4.1.5597.30.0.6.2.1.10 integer read-only
am I a falseticker? Enumeration: 'notAvailable': 0, 'yes': 2, 'no': 1.
           mbgLtNgMisc 1.3.6.1.4.1.5597.30.0.7
               mbgLtNgEthPortLinkTable 1.3.6.1.4.1.5597.30.0.7.1 no-access
a table of physical ethernet interface port link states
                   mbgLtNgEthPortLinkTableEntry 1.3.6.1.4.1.5597.30.0.7.1.1 no-access
port link states for each physical ethernet interface
                       mbgLtNgEthPortLinkIndex 1.3.6.1.4.1.5597.30.0.7.1.1.1 unsigned32 no-access
interface index
                       mbgLtNgEthPortLinkState 1.3.6.1.4.1.5597.30.0.7.1.1.2 integer read-only
link state Enumeration: 'down': 0, 'up': 1.
       mbgLtNgConfig 1.3.6.1.4.1.5597.30.1
           mbgLtNgCfgEthernet 1.3.6.1.4.1.5597.30.1.0
               mbgLtNgCfgEthernetHostname 1.3.6.1.4.1.5597.30.1.0.1 displaystring read-write
devices' hostname
               mbgLtNgCfgEthernetDomain 1.3.6.1.4.1.5597.30.1.0.2 displaystring read-write
devices' domain membership
               mbgLtNgCfgEthernetNameserver1 1.3.6.1.4.1.5597.30.1.0.3 displaystring read-write
first nameserver's ip address
               mbgLtNgCfgEthernetNameserver2 1.3.6.1.4.1.5597.30.1.0.4 displaystring read-write
second nameserver's ip address
               mbgLtNgCfgEthernetIpv4Gateway 1.3.6.1.4.1.5597.30.1.0.5 displaystring read-write
device's ethernet ipv4 gateway
               mbgLtNgCfgEthernetIpv6Gateway 1.3.6.1.4.1.5597.30.1.0.6 displaystring read-write
device's ethernet ipv6 gateway
               mbgLtNgCfgNumberOfPhysicalIf 1.3.6.1.4.1.5597.30.1.0.7 unsigned32 read-only
number of virtual interfaces interfaces
               mbgLtNgCfgNumberOfVirtualIf 1.3.6.1.4.1.5597.30.1.0.8 unsigned32 read-only
number of virtual interfaces interfaces
               mbgLtNgCfgPhysicalIfTable 1.3.6.1.4.1.5597.30.1.0.9 no-access
a table of service stati for the ethernet interfaces
                   mbgLtNgCfgPhysicalIfTableEntry 1.3.6.1.4.1.5597.30.1.0.9.1 no-access
a list of objects pertaining to a mrs input reference
                       mbgLtNgCfgPhysicalIfIndex 1.3.6.1.4.1.5597.30.1.0.9.1.1 unsigned32 no-access
specifies the physical interface index
                       mbgLtNgCfgPhysicalIfMac 1.3.6.1.4.1.5597.30.1.0.9.1.2 displaystring read-only
interface's physical MAC address
                       mbgLtNgCfgPhysicalIfNetLinkMode 1.3.6.1.4.1.5597.30.1.0.9.1.3 integer read-write
interface's net link mode; hd = half-duplex; fd = full-duplex Enumeration: 'hd10Mbit': 1, 'fd10Mbit': 2, 'auto': 0, 'hd100Mbit': 3, 'hd1000Mbit': 5, 'fd100Mbit': 4, 'fd1000Mbit': 6.
                       mbgLtNgCfgPhysicalIfIndicateLink 1.3.6.1.4.1.5597.30.1.0.9.1.4 meinbergswitch read-write
indicate link via front panel LED
                       mbgLtNgCfgPhysicalIfBondingGroup 1.3.6.1.4.1.5597.30.1.0.9.1.5 unsigned32 read-write
assign interface to bonding group; '0' means not assigned
                       mbgLtNgCfgPhysicalIfIpv6Mode 1.3.6.1.4.1.5597.30.1.0.9.1.6 integer read-write
enable IPv6 mode Enumeration: 'deactivated': 0, 'activatedWithAutoconf': 2, 'activated': 1.
               mbgLtNgCfgVirtualIfTable 1.3.6.1.4.1.5597.30.1.0.10 no-access
a table of service stati for the ethernet interfaces
                     mbgLtNgCfgVirtualIfTableEntry 1.3.6.1.4.1.5597.30.1.0.10.1 no-access
a list of objects pertaining to a mrs input reference
                         mbgLtNgCfgVirtualIfIndex 1.3.6.1.4.1.5597.30.1.0.10.1.1 unsigned32 no-access
specifies the virtual interface index
                         mbgLtNgCfgVirtualIfIpv4Addr 1.3.6.1.4.1.5597.30.1.0.10.1.2 displaystring read-write
interfaces' ipv4 address
                         mbgLtNgCfgVirtualIfIpv4Netmask 1.3.6.1.4.1.5597.30.1.0.10.1.3 displaystring read-write
interfaces' ipv4 netmask
                         mbgLtNgCfgVirtualIfIpv4Dhcp 1.3.6.1.4.1.5597.30.1.0.10.1.4 meinbergswitch read-write
interface uses ipv4 dhcp?
                         mbgLtNgCfgVirtualIfIpv4AddrFromDhcp 1.3.6.1.4.1.5597.30.1.0.10.1.5 displaystring read-only
interfaces' ipv4 address received from dhcp
                         mbgLtNgCfgVirtualIfIpv4NetmaskFromDhcp 1.3.6.1.4.1.5597.30.1.0.10.1.6 displaystring read-only
interfaces' ipv4 netmask received from dhcp
                         mbgLtNgCfgVirtualIfIpv4BroadcastFromDhcp 1.3.6.1.4.1.5597.30.1.0.10.1.7 displaystring read-only
interfaces' ipv4 broadcast received from dhcp
                         mbgLtNgCfgVirtualIfIpv4GatewayFromDhcp 1.3.6.1.4.1.5597.30.1.0.10.1.8 displaystring read-only
interfaces' ipv4 gateway received from dhcp
                         mbgLtNgCfgVirtualIfIpv4DnsFromDhcp 1.3.6.1.4.1.5597.30.1.0.10.1.9 displaystring read-only
interfaces' ipv4 dns server received from dhcp
                         mbgLtNgCfgVirtualIfIpv4DomainFromDhcp 1.3.6.1.4.1.5597.30.1.0.10.1.10 displaystring read-only
interfaces' ipv4 dns server received from dhcp
                         mbgLtNgCfgVirtualIfIpv6Addr 1.3.6.1.4.1.5597.30.1.0.10.1.11 displaystring read-write
interfaces' ipv6 address
                         mbgLtNgCfgVirtualIfIpv6Dhcp 1.3.6.1.4.1.5597.30.1.0.10.1.12 meinbergswitch read-write
interfaces uses ipv6 dhcp
                         mbgLtNgCfgVirtualIfIpv6RoutAdd 1.3.6.1.4.1.5597.30.1.0.10.1.13 displaystring read-only
interfaces' router advertisement ipv6 address
                         mbgLtNgCfgVirtualIfIpv6LinkLocal 1.3.6.1.4.1.5597.30.1.0.10.1.14 displaystring read-only
interfaces' ipv6 link local address
                         mbgLtNgCfgVirtualIfAssigned 1.3.6.1.4.1.5597.30.1.0.10.1.15 unsigned32 read-write
mapping to the physical interface this virtual one is assigned to
                         mbgLtNgCfgVirtualIfMac 1.3.6.1.4.1.5597.30.1.0.10.1.16 displaystring read-only
MAC-address of this virtual interface
                         mbgLtNgCfgVirtualIfLabel 1.3.6.1.4.1.5597.30.1.0.10.1.17 displaystring read-write
user description for this label (like an alias)
                         mbgLtNgCfgVirtualIfVlan 1.3.6.1.4.1.5597.30.1.0.10.1.18 meinbergswitch read-write
is vlan enabled
                         mbgLtNgCfgVirtualIfVlanTag 1.3.6.1.4.1.5597.30.1.0.10.1.19 unsigned32 read-write
vlan tag
                         mbgLtNgCfgVirtualIfVlanPrio 1.3.6.1.4.1.5597.30.1.0.10.1.20 unsigned32 read-write
vlan priority
                         mbgLtNgCfgVirtualIfCluster 1.3.6.1.4.1.5597.30.1.0.10.1.21 meinbergswitch read-write
is cluster mode enabled
                         mbgLtNgCfgVirtualIfClusterIpv4Addr 1.3.6.1.4.1.5597.30.1.0.10.1.22 displaystring read-write
ipv4 cluster address
                         mbgLtNgCfgVirtualIfClusterIpv4Netmask 1.3.6.1.4.1.5597.30.1.0.10.1.23 displaystring read-write
cluster ipv4 netmask
                         mbgLtNgCfgVirtualIfClusterPrio 1.3.6.1.4.1.5597.30.1.0.10.1.24 unsigned32 read-write
cluster priority
                         mbgLtNgCfgVirtualIfServiceNtp 1.3.6.1.4.1.5597.30.1.0.10.1.25 meinbergswitch read-write
is ntp active on this interface
                         mbgLtNgCfgVirtualIfServiceHttp 1.3.6.1.4.1.5597.30.1.0.10.1.26 meinbergswitch read-write
is http active on this interface
                         mbgLtNgCfgVirtualIfServiceHttps 1.3.6.1.4.1.5597.30.1.0.10.1.27 meinbergswitch read-write
is https active on this interface
                         mbgLtNgCfgVirtualIfServiceTelnet 1.3.6.1.4.1.5597.30.1.0.10.1.28 meinbergswitch read-write
is telnet active on this interface
                         mbgLtNgCfgVirtualIfServiceSsh 1.3.6.1.4.1.5597.30.1.0.10.1.29 meinbergswitch read-write
is ssh active on this interface
                         mbgLtNgCfgVirtualIfServiceSnmp 1.3.6.1.4.1.5597.30.1.0.10.1.30 meinbergswitch read-write
is snmp active on this interface
                         mbgLtNgCfgVirtualIfServiceFtp 1.3.6.1.4.1.5597.30.1.0.10.1.31 meinbergswitch read-write
is ftp active on this interface
                         mbgLtNgCfgVirtualIfServiceTime 1.3.6.1.4.1.5597.30.1.0.10.1.32 meinbergswitch read-write
is time active on this interface
                         mbgLtNgCfgVirtualIfServiceDaytime 1.3.6.1.4.1.5597.30.1.0.10.1.33 meinbergswitch read-write
is daytime active on this interface
                         mbgLtNgCfgVirtualIfServiceFpc 1.3.6.1.4.1.5597.30.1.0.10.1.34 meinbergswitch read-write
is fpc active on this interface
               mbgLtNgCfgEthernetGenClusterPort 1.3.6.1.4.1.5597.30.1.0.11 unsigned32 read-write
general cluster port
               mbgLtNgCfgEthernetGenClusterIp 1.3.6.1.4.1.5597.30.1.0.12 displaystring read-write
general multicast cluster address
           mbgLtNgCfgNotifications 1.3.6.1.4.1.5597.30.1.1
               mbgLtNgCfgSyslog 1.3.6.1.4.1.5597.30.1.1.0
                   mbgLtNgCfgSyslogServerAddr 1.3.6.1.4.1.5597.30.1.1.0.1 displaystring read-write
comma separated string of all configured syslog servers; use such a list to set syslog servers
                   mbgLtNgCfgSyslogLoglevel 1.3.6.1.4.1.5597.30.1.1.0.2 integer read-write
loglevel for syslog server Enumeration: 'info': 6, 'notice': 5, 'emergency': 0, 'alert': 1, 'critical': 2, 'error': 3, 'warning': 4.
               mbgLtNgCfgEmail 1.3.6.1.4.1.5597.30.1.1.1
                   mbgLtNgCfgEmailTo 1.3.6.1.4.1.5597.30.1.1.1.1 displaystring read-write
email address to send alerts etc. to (receiving address)
                   mbgLtNgCfgEmailFrom 1.3.6.1.4.1.5597.30.1.1.1.2 displaystring read-write
email address to send alerts etc. from (sending address)
                   mbgLtNgCfgEmailSmarthostAddr 1.3.6.1.4.1.5597.30.1.1.1.3 displaystring read-write
SMTP smarthost used to send mail (ip or hostname)
                   mbgLtNgCfgEmailSmarthostPort 1.3.6.1.4.1.5597.30.1.1.1.4 unsigned32 read-write
SMTP smarthost listenning port
                   mbgLtNgCfgEmailSmarthostAuth 1.3.6.1.4.1.5597.30.1.1.1.5 meinbergswitch read-write
use authentication for smarthost
                   mbgLtNgCfgEmailSmarthostAuthUser 1.3.6.1.4.1.5597.30.1.1.1.6 displaystring read-write
user to authenticate at smarthost
                   mbgLtNgCfgEmailSmarthostAuthPw 1.3.6.1.4.1.5597.30.1.1.1.7 displaystring read-write
password to authenticate user at smarthost
               mbgLtNgCfgWinpopup 1.3.6.1.4.1.5597.30.1.1.2
                   mbgLtNgCfgWmailAddress1 1.3.6.1.4.1.5597.30.1.1.2.1 displaystring read-write
first windows popup alert receiver (ip or hostname)
                   mbgLtNgCfgWmailAddress2 1.3.6.1.4.1.5597.30.1.1.2.2 displaystring read-write
second windows popup alert receiver (ip or hostname)
               mbgLtNgCfgSNMP 1.3.6.1.4.1.5597.30.1.1.3
                   mbgLtNgCfgSnmpTrapRecTable 1.3.6.1.4.1.5597.30.1.1.3.1 no-access
a table of SNMP trap receiver information
                       mbgLtNgCfgSnmpTrapRecTableEntry 1.3.6.1.4.1.5597.30.1.1.3.1.1 no-access
a list of objects pertaining to an interface and concerning broad-, multi- and manycast
                           mbgLtNgCfgSnmpTrapRecIndex 1.3.6.1.4.1.5597.30.1.1.3.1.1.1 unsigned32 no-access
index of different SNMP trap receivers
                           mbgLtNgCfgSnmpTrapRecAddr 1.3.6.1.4.1.5597.30.1.1.3.1.1.2 displaystring read-write
SNMP trap receiver address (ip or hostname)
                           mbgLtNgCfgSnmpTrapRecCommunity 1.3.6.1.4.1.5597.30.1.1.3.1.1.3 displaystring read-write
SNMP trap receiver community
                           mbgLtNgCfgSnmpTrapRecVersion 1.3.6.1.4.1.5597.30.1.1.3.1.1.4 integer read-write
SNMP trap receiver version Enumeration: 'v2c': 2, 'v1': 1, 'v3': 3.
                   mbgLtNgCfgSnmpReadCommunity 1.3.6.1.4.1.5597.30.1.1.3.2 displaystring read-write
read community for SNMPv1 and SNMPv2c
                   mbgLtNgCfgSnmpWriteCommunity 1.3.6.1.4.1.5597.30.1.1.3.3 displaystring read-write
read community for SNMPv1 and SNMPv2c
                   mbgLtNgCfgSnmpContact 1.3.6.1.4.1.5597.30.1.1.3.4 displaystring read-write
SNMP contact string for Lantime
                   mbgLtNgCfgSnmpLocation 1.3.6.1.4.1.5597.30.1.1.3.5 displaystring read-write
SNMP location string for Lantime
                   mbgLtNgCfgSnmpV3UserName 1.3.6.1.4.1.5597.30.1.1.3.6 displaystring read-write
username for SNMPv3
                   mbgLtNgCfgSnmpV3UserRights 1.3.6.1.4.1.5597.30.1.1.3.7 integer read-write
privacy protocol for SNMPv3 Enumeration: 'readwrite': 1, 'readonly': 0.
                   mbgLtNgCfgSnmpV3Context 1.3.6.1.4.1.5597.30.1.1.3.8 displaystring read-write
context string for SNMPv3
                   mbgLtNgCfgSnmpV3SecurityLevel 1.3.6.1.4.1.5597.30.1.1.3.9 integer read-write
authentication level for SNMPv3 Enumeration: 'noAuthNoPriv': 0, 'authPriv': 2, 'authNoPriv': 1.
                   mbgLtNgCfgSnmpV3AuthProtocol 1.3.6.1.4.1.5597.30.1.1.3.10 integer read-write
authentication protocol for SNMPv3 Enumeration: 'sha': 1, 'md5': 0.
                   mbgLtNgCfgSnmpV3AuthPassphrase 1.3.6.1.4.1.5597.30.1.1.3.11 displaystring read-write
authentication passphrase for SNMPv3
                   mbgLtNgCfgSnmpV3PrivProtocol 1.3.6.1.4.1.5597.30.1.1.3.12 integer read-write
privacy protocol for SNMPv3 Enumeration: 'aes': 1, 'des': 0.
                   mbgLtNgCfgSnmpV3PrivPassphrase 1.3.6.1.4.1.5597.30.1.1.3.13 displaystring read-write
privacy passphrase for SNMPv3
                   mbgLtNgCfgSnmpRetries 1.3.6.1.4.1.5597.30.1.1.3.14 unsigned32 read-write
number of retries for sending traps
                   mbgLtNgCfgSnmpTimeout 1.3.6.1.4.1.5597.30.1.1.3.15 unsigned32 read-write
timeout for sending traps (in seconds)
                   mbgLtNgCfgSnmpEnabledVersion 1.3.6.1.4.1.5597.30.1.1.3.16 integer read-write
currently enabled SNMP version Enumeration: 'v1ANDv2cANDv3': 2, 'v1ANDv2c': 0, 'v3only': 1.
               mbgLtNgCfgWalldisplay 1.3.6.1.4.1.5597.30.1.1.4
                   mbgLtNgCfgVP100Display1Addr 1.3.6.1.4.1.5597.30.1.1.4.1 displaystring read-write
address of wall display (ip or hostname)
                   mbgLtNgCfgVP100Display1SN 1.3.6.1.4.1.5597.30.1.1.4.2 displaystring read-write
serial number of first VP100 wall display
                   mbgLtNgCfgVP100Display2Addr 1.3.6.1.4.1.5597.30.1.1.4.3 displaystring read-write
address of wall display (ip or hostname)
                   mbgLtNgCfgVP100Display2SN 1.3.6.1.4.1.5597.30.1.1.4.4 displaystring read-write
serial number of second VP100 wall display
               mbgLtNgCfgNtpClientMonitoring 1.3.6.1.4.1.5597.30.1.1.5
                   mbgLtNgCfgNtpMaxClientOffset 1.3.6.1.4.1.5597.30.1.1.5.1 unsigned32 read-write
max NTP client offset limit in milliseconds
                   mbgLtNgCfgNtpMaxClientStratum 1.3.6.1.4.1.5597.30.1.1.5.2 unsigned32 read-write
max NTP client stratum level
               mbgLtNgCfgTrapTrigger 1.3.6.1.4.1.5597.30.1.1.6
                   mbgLtNgCfgTrapNormalOperation 1.3.6.1.4.1.5597.30.1.1.6.1 displaystring read-write
string containing signaling information ( comma-separated ); use the following aliases to set params: Email -> email Wmail -> wmail Snmp -> snmp VP100 -> disp User -> own Alarm -> led Relay -> relais Following string is perfectly valid to enable signaling for SNMP and Email: 'snmp,email'. Please note that some objects do not suppurt relay and led but this is announced at each MIB object itself. This object, for example, does not support them.
                   mbgLtNgCfgTrapNtpNotSync 1.3.6.1.4.1.5597.30.1.1.6.2 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapNtpSync 1.3.6.1.4.1.5597.30.1.1.6.3 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapNtpStopped 1.3.6.1.4.1.5597.30.1.1.6.4 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapServerBoot 1.3.6.1.4.1.5597.30.1.1.6.5 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapRefclockNotResponding 1.3.6.1.4.1.5597.30.1.1.6.6 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapRefclockSynchronized 1.3.6.1.4.1.5597.30.1.1.6.7 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapRefclockNotSynchronized 1.3.6.1.4.1.5597.30.1.1.6.8 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapSecRefclockNotResponding 1.3.6.1.4.1.5597.30.1.1.6.9 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapSecRefclockSynchronized 1.3.6.1.4.1.5597.30.1.1.6.10 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapSecRefclockNotSynchronized 1.3.6.1.4.1.5597.30.1.1.6.11 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapAntennaFaulty 1.3.6.1.4.1.5597.30.1.1.6.12 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapAntennaReconnect 1.3.6.1.4.1.5597.30.1.1.6.13 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapAntennaShortCircuit 1.3.6.1.4.1.5597.30.1.1.6.14 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapConfigChanged 1.3.6.1.4.1.5597.30.1.1.6.15 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapLeapSecAnnounced 1.3.6.1.4.1.5597.30.1.1.6.16 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapNtpClientLimitExceeded 1.3.6.1.4.1.5597.30.1.1.6.17 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapRefSrcLimitExceeded 1.3.6.1.4.1.5597.30.1.1.6.18 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapRefSrcDisconnected 1.3.6.1.4.1.5597.30.1.1.6.19 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapRefSrcReconnected 1.3.6.1.4.1.5597.30.1.1.6.20 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapShsTimeLimitError 1.3.6.1.4.1.5597.30.1.1.6.21 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapShsTimeLimitWarning 1.3.6.1.4.1.5597.30.1.1.6.22 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapNetworkDown 1.3.6.1.4.1.5597.30.1.1.6.23 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapNetworkUp 1.3.6.1.4.1.5597.30.1.1.6.24 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapPowerSupplyUp 1.3.6.1.4.1.5597.30.1.1.6.25 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapPowerSupplyDown 1.3.6.1.4.1.5597.30.1.1.6.26 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapFdmError 1.3.6.1.4.1.5597.30.1.1.6.27 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapLowSystemResources 1.3.6.1.4.1.5597.30.1.1.6.28 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapPtpNetworkDown 1.3.6.1.4.1.5597.30.1.1.6.29 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapPtpNetworkUp 1.3.6.1.4.1.5597.30.1.1.6.30 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapPtpStateChanged 1.3.6.1.4.1.5597.30.1.1.6.31 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapPtpError 1.3.6.1.4.1.5597.30.1.1.6.32 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapFanDown 1.3.6.1.4.1.5597.30.1.1.6.33 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapFanUp 1.3.6.1.4.1.5597.30.1.1.6.34 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgRepeatEvent 1.3.6.1.4.1.5597.30.1.1.6.35 integer read-write
when to send last error trap message again Enumeration: 'everyMinute': 1, 'never': 0, 'everyDay': 3, 'everyHour': 2.
                   mbgLtNgCfgRepetitions 1.3.6.1.4.1.5597.30.1.1.6.36 unsigned32 read-write
how often do you want to resend an error trap
                   mbgLtNgCfgTrapWarmedUp 1.3.6.1.4.1.5597.30.1.1.6.37 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
                   mbgLtNgCfgTrapNotWarmedUp 1.3.6.1.4.1.5597.30.1.1.6.38 displaystring read-write
see 'mbgLtNgCfgTrapNormalOperation' for a detailed explanation
           mbgLtNgCfgSecurity 1.3.6.1.4.1.5597.30.1.2
               mbgLtNgCfgLoginAccess 1.3.6.1.4.1.5597.30.1.2.0
                   mbgLtNgCfgDisableRootLogin 1.3.6.1.4.1.5597.30.1.2.0.1 meinbergswitch read-write
do not allow user 'root' to login
                   mbgLtNgCfgAllowNetworkDiscovery 1.3.6.1.4.1.5597.30.1.2.0.2 meinbergswitch read-write
allow LANTIME to be discovered via network mdns
               mbgLtNgCfgFrontPanel 1.3.6.1.4.1.5597.30.1.2.1
                   mbgLtNgCfgLockFrontPanel 1.3.6.1.4.1.5597.30.1.2.1.1 meinbergswitch read-write
do not allow usage of the front panel
                   mbgLtNgCfgDisableUsbPort 1.3.6.1.4.1.5597.30.1.2.1.2 meinbergswitch read-write
do not allow usage of front USB port
               mbgLtNgCfgSsh 1.3.6.1.4.1.5597.30.1.2.2
                   mbgLtNgCfgSshKeyLength 1.3.6.1.4.1.5597.30.1.2.2.1 unsigned32 read-write
ssh key length in bits
                   mbgLtNgCfgSshShellTimeout 1.3.6.1.4.1.5597.30.1.2.2.2 unsigned32 read-write
ssh shell timeout in seconds
           mbgLtNgCfgNtp 1.3.6.1.4.1.5597.30.1.3
               mbgLtNgCfgNtpTable 1.3.6.1.4.1.5597.30.1.3.1 no-access
a table of configured, external NTP servers
                   mbgLtNgCfgNtpTableEntry 1.3.6.1.4.1.5597.30.1.3.1.1 no-access
a list of objects pertaining to a configured,external NTP server
                       mbgLtNgCfgNtpIndex 1.3.6.1.4.1.5597.30.1.3.1.1.1 unsigned32 no-access
index (and no.) of external NTP server
                       mbgLtNgCfgNtpServerIP 1.3.6.1.4.1.5597.30.1.3.1.1.2 displaystring read-write
ip address for external NTP server
                       mbgLtNgCfgNtpServerKey 1.3.6.1.4.1.5597.30.1.3.1.1.3 unsigned32 read-write
key for external NTP server
                       mbgLtNgCfgNtpServerAutokey 1.3.6.1.4.1.5597.30.1.3.1.1.4 meinbergswitch read-write
is autokey enabled for the external NTP server
                       mbgLtNgCfgNtpServerMinpoll 1.3.6.1.4.1.5597.30.1.3.1.1.5 unsigned32 read-write
is autokey enabled for the external NTP server
                       mbgLtNgCfgNtpServerMaxpoll 1.3.6.1.4.1.5597.30.1.3.1.1.6 unsigned32 read-write
is autokey enabled for the external NTP server
                       mbgLtNgCfgNtpServerIburst 1.3.6.1.4.1.5597.30.1.3.1.1.7 meinbergswitch read-write
is autokey enabled for the external NTP server
               mbgLtNgCfgNtpBMTable 1.3.6.1.4.1.5597.30.1.3.2 no-access
a table of configured, external NTP servers
                   mbgLtNgCfgNtpBMTableEntry 1.3.6.1.4.1.5597.30.1.3.2.1 no-access
a list of objects pertaining to an interface and concerning broad-, multi- and manycast
                       mbgLtNgCfgNtpBMIndex 1.3.6.1.4.1.5597.30.1.3.2.1.1 unsigned32 no-access
index of interface concerning different NTP modes
                       mbgLtNgCfgNtpBroadAddr 1.3.6.1.4.1.5597.30.1.3.2.1.2 displaystring read-only
address for NTP broadcast mode
                       mbgLtNgCfgNtpBroadSymKey 1.3.6.1.4.1.5597.30.1.3.2.1.3 unsigned32 read-only
symmetric key number for broadcast
                       mbgLtNgCfgNtpBroadInterval 1.3.6.1.4.1.5597.30.1.3.2.1.4 unsigned32 read-only
NTP broadcast interval on specific interval
                       mbgLtNgCfgNtpBroadUseAutokey 1.3.6.1.4.1.5597.30.1.3.2.1.5 meinbergswitch read-only
use autokey for broadcast
               mbgLtNgCfgNtpEnableMulticast 1.3.6.1.4.1.5597.30.1.3.3 meinbergswitch read-write
enable or disable multicast mode
               mbgLtNgCfgNtpMultiAddr 1.3.6.1.4.1.5597.30.1.3.4 displaystring read-write
address for NTP multicast mode
               mbgLtNgCfgNtpMultiInterval 1.3.6.1.4.1.5597.30.1.3.5 unsigned32 read-write
NTP multicast interval on specific interval
               mbgLtNgCfgNtpMultiSymKey 1.3.6.1.4.1.5597.30.1.3.6 unsigned32 read-write
symmetric key number for multicast
               mbgLtNgCfgNtpMultiUseAutokey 1.3.6.1.4.1.5597.30.1.3.7 meinbergswitch read-write
use autokey for multicast
               mbgLtNgCfgNtpEnableManycast 1.3.6.1.4.1.5597.30.1.3.8 meinbergswitch read-write
enable or disable manycast mode for this interface
               mbgLtNgCfgNtpManyAddr 1.3.6.1.4.1.5597.30.1.3.9 displaystring read-write
address for NTP manycast mode
               mbgLtNgCfgNtpManySymKey 1.3.6.1.4.1.5597.30.1.3.11 unsigned32 read-write
symmetric key number for manycast
               mbgLtNgCfgNtpManyUseAutokey 1.3.6.1.4.1.5597.30.1.3.12 meinbergswitch read-write
use autokey for manycast
               mbgLtNgCfgNtpLocalClkStratum 1.3.6.1.4.1.5597.30.1.3.13 unsigned32 read-write
stratum of local clock
               mbgLtNgCfgNtpDisableLocalClk 1.3.6.1.4.1.5597.30.1.3.14 meinbergswitch read-write
disable local clock
               mbgLtNgCfgNtpSpoofLocalTime 1.3.6.1.4.1.5597.30.1.3.15 meinbergswitch read-write
NTP outputs local time instead of UTC; see mbgLtNgCfgNtpTimeScale
               mbgLtNgCfgNtpLocalTrustedKeys 1.3.6.1.4.1.5597.30.1.3.16 displaystring read-write
local trusted key
               mbgLtNgCfgNtpTrusttime 1.3.6.1.4.1.5597.30.1.3.17 unsigned32 read-write
accept async reference clock for this amount of time in seconds
               mbgLtNgCfgNtpTimeScale 1.3.6.1.4.1.5597.30.1.3.18 integer read-write
timescale Enumeration: 'utc': 0, 'local': 1.
               mbgLtNgCfgNtpEnableClientCounter 1.3.6.1.4.1.5597.30.1.3.19 meinbergswitch read-write
enable NTP request client counting
               mbgLtNgCfgNtpEnableClientCounterDuration 1.3.6.1.4.1.5597.30.1.3.20 integer32 read-write
NTP client counter duration in seconds; 0 means continuously
           mbgLtNgCfgPtp 1.3.6.1.4.1.5597.30.1.4
               mbgLtNgCfgPtpTable 1.3.6.1.4.1.5597.30.1.4.1 no-access
a table of PTPv2 related configurtion variables
                   mbgLtNgCfgPtpTableEntry 1.3.6.1.4.1.5597.30.1.4.1.1 no-access
a list of configuration objects pertaining to a PTPv2 module
                       mbgLtNgCfgPtpIndex 1.3.6.1.4.1.5597.30.1.4.1.1.1 unsigned32 no-access
index for PTPv2 module
                       mbgLtNgCfgPtpHostname 1.3.6.1.4.1.5597.30.1.4.1.1.2 displaystring read-write
network hostname
                       mbgLtNgCfgPtpDomainname 1.3.6.1.4.1.5597.30.1.4.1.1.3 displaystring read-write
network domain
                       mbgLtNgCfgPtpNameserver1 1.3.6.1.4.1.5597.30.1.4.1.1.4 displaystring read-write
ethernet nameserver for hostname resolving
                       mbgLtNgCfgPtpNameserver2 1.3.6.1.4.1.5597.30.1.4.1.1.5 displaystring read-write
ethernet nameserver for hostname resolving
                       mbgLtNgCfgPtpIpv4 1.3.6.1.4.1.5597.30.1.4.1.1.6 displaystring read-write
ip address
                       mbgLtNgCfgPtpNetmask 1.3.6.1.4.1.5597.30.1.4.1.1.7 displaystring read-write
netmask
                       mbgLtNgCfgPtpGateway 1.3.6.1.4.1.5597.30.1.4.1.1.8 displaystring read-write
default gateway
                       mbgLtNgCfgPtpEnableVlan 1.3.6.1.4.1.5597.30.1.4.1.1.9 meinbergswitch read-write
Enable VLAN if it is supported
                       mbgLtNgCfgPtpVlanId 1.3.6.1.4.1.5597.30.1.4.1.1.10 unsigned32 read-write
VLAN id ranges from 0-4096
                       mbgLtNgCfgPtpVlanPriority 1.3.6.1.4.1.5597.30.1.4.1.1.11 unsigned32 read-write
VLAN priority ranges from 0-7
                       mbgLtNgCfgPtpEnableDhcp 1.3.6.1.4.1.5597.30.1.4.1.1.12 meinbergswitch read-write
Enable DCHP for PTPv2 module
                       mbgLtNgCfgPtpMode 1.3.6.1.4.1.5597.30.1.4.1.1.13 integer read-write
PTP mode Enumeration: 'ntpClient': 7, 'unicastSlave': 1, 'ntpServer': 6, 'unicastMaster': 3, 'multicastMaster': 2, 'multicastAuto': 4, 'multicastSlave': 0, 'bothMaster': 5.
                       mbgLtNgCfgPtpDelayMechanism 1.3.6.1.4.1.5597.30.1.4.1.1.14 integer read-write
how to calculate delay mechanism Enumeration: 'e2e': 0, 'p2p': 1.
                       mbgLtNgCfgPtpNetworkProtocol 1.3.6.1.4.1.5597.30.1.4.1.1.15 integer read-write
how to calculate delay mechanism Enumeration: 'ieee8023': 3, 'reserved': 0, 'udpIpv6': 2, 'udpIpv4': 1.
                       mbgLtNgCfgPtpDomainNumber 1.3.6.1.4.1.5597.30.1.4.1.1.16 unsigned32 read-write
ptp domain membership
                       mbgLtNgCfgPtpPriority1 1.3.6.1.4.1.5597.30.1.4.1.1.17 unsigned32 read-write
ptp user defined major priority
                       mbgLtNgCfgPtpPriority2 1.3.6.1.4.1.5597.30.1.4.1.1.18 unsigned32 read-write
ptp user defined minor priority
                       mbgLtNgCfgPtpSyncInterval 1.3.6.1.4.1.5597.30.1.4.1.1.19 integer32 read-write
value is defined as power of 2; for example: 2 = one message every 4 seconds, -2 = 4 messages every second
                       mbgLtNgCfgPtpAnnounceInterval 1.3.6.1.4.1.5597.30.1.4.1.1.20 integer32 read-write
see 'mbgLtNgCfPtpSyncInterval' for explanation
                       mbgLtNgCfgPtpDelayReqInterval 1.3.6.1.4.1.5597.30.1.4.1.1.21 integer32 read-write
see 'mbgLtNgCfPtpSyncInterval' for explanation
                       mbgLtNgCfgPtpTimescale 1.3.6.1.4.1.5597.30.1.4.1.1.22 integer read-write
see 'mbgLtNgCfPtpSyncInterval' for explanation Enumeration: 'ptp': 1, 'arbitrary': 0.
                       mbgLtNgCfgPtpIpv6Avail 1.3.6.1.4.1.5597.30.1.4.1.1.23 integer read-only
Is IPv6 supported? Enumeration: 'yes': 1, 'no': 0.
                       mbgLtNgCfgPtpIpv6Mode 1.3.6.1.4.1.5597.30.1.4.1.1.24 integer read-write
IPv6 addressing mode Enumeration: 'dhcp': 2, 'static': 0, 'ra': 1.
                       mbgLtNgCfgPtpIpv6Address 1.3.6.1.4.1.5597.30.1.4.1.1.25 displaystring read-write
IPv6 address if supported, else n/a
                       mbgLtNgCfgPtpIpv6McastScope 1.3.6.1.4.1.5597.30.1.4.1.1.26 integer read-write
Multicast scope. See RFC 7346 and RFC 4291 Enumeration: 'linkLocal': 2, 'intfLocal': 1, 'siteLocal': 5, 'adminLocal': 4, 'realmLocal': 3, 'orgaLocal': 8, 'globalScope': 14.
                       mbgLtNgCfgPtpDisableSsh 1.3.6.1.4.1.5597.30.1.4.1.1.27 meinbergswitch read-write
Disable SSH for PTP port
                       mbgLtNgCfgPtpDscpClass 1.3.6.1.4.1.5597.30.1.4.1.1.28 unsigned32 read-write
DSCP classification value ranges from 0-64
                       mbgLtNgCfgPtpMcastTtl 1.3.6.1.4.1.5597.30.1.4.1.1.29 unsigned32 read-write
Multicast TTL value ranges from 0-255
                       mbgLtNgCfgPtpOpMode 1.3.6.1.4.1.5597.30.1.4.1.1.30 integer read-write
General PTP operation mode Enumeration: 'ntp': 1, 'ptp': 0.
                       mbgLtNgCfgPtpProfile 1.3.6.1.4.1.5597.30.1.4.1.1.31 integer read-only
PTP profile Enumeration: 'powIeeeC37238': 3, 'smpteSt20592': 6, 'custom': 0, 'telItuTG82651': 4, 'defP2pIeee15882008': 2, 'telItuTG82751': 5, 'defE2eIeee15882008': 1.
                       mbgLtNgCfgPtpHybridMode 1.3.6.1.4.1.5597.30.1.4.1.1.32 meinbergswitch read-write
Run card in hybrid mode
                       mbgLtNgCfgPtpUcastMstAddr 1.3.6.1.4.1.5597.30.1.4.1.1.33 displaystring read-write
IP address of unicast master when in slave mode. Only 1!!! is shown and can be set.
                       mbgLtNgCfgPtpAnnRcptTmout 1.3.6.1.4.1.5597.30.1.4.1.1.34 unsigned32 read-write
Timeout for announce messages
                       mbgLtNgCfgPtpMessageDuration 1.3.6.1.4.1.5597.30.1.4.1.1.35 unsigned32 read-write
Time period until master stops sending messages [s]
                       mbgLtNgCfgPtpSyncEAvail 1.3.6.1.4.1.5597.30.1.4.1.1.36 meinbergswitch read-only
Is SyncE supported?
                       mbgLtNgCfgPtpSyncEEnabled 1.3.6.1.4.1.5597.30.1.4.1.1.37 meinbergswitch read-write
Is Sync-E enabled if supported?
                       mbgLtNgCfgPtpSyncEQltLvlSelEnable 1.3.6.1.4.1.5597.30.1.4.1.1.38 meinbergswitch read-write
Enable quality selection?
                       mbgLtNgCfgPtpSyncESdhNwOption 1.3.6.1.4.1.5597.30.1.4.1.1.39 integer read-write
Sdh network option Enumeration: 'opt1': 0, 'opt2': 1.
                       mbgLtNgCfgPtpSyncEInputSsm 1.3.6.1.4.1.5597.30.1.4.1.1.40 integer read-write
Input SSMs combied for both options. You should be aware of using which code when. Enumeration: 'st2': 7, 'prc': 2, 'ssuB': 8, 'inv6': 6, 'inv5': 5, 'inv3': 3, 'stuUkn': 0, 'eec1Sec': 11, 'inv9': 9, 'ssuATnc': 4, 'dnuDus': 15, 'eec2St3': 10, 'prs': 1, 'prov': 14, 'smc': 12, 'st3e': 13.
                       mbgLtNgCfgPtpSyncEOutputSsm 1.3.6.1.4.1.5597.30.1.4.1.1.41 integer read-write
Input SSMs combined for both options. You should be aware of using which code when. Enumeration: 'st2': 7, 'prc': 2, 'ssuB': 8, 'inv6': 6, 'inv5': 5, 'inv3': 3, 'stuUkn': 0, 'eec1Sec': 11, 'inv9': 9, 'ssuATnc': 4, 'dnuDus': 15, 'eec2St3': 10, 'prs': 1, 'prov': 14, 'smc': 12, 'st3e': 13.
                       mbgLtNgCfgPtpSyncEGbitCopperMode 1.3.6.1.4.1.5597.30.1.4.1.1.42 integer read-write
Gigabit copper modes Enumeration: 'preferMaster': 4, 'forceOrIsSlave': 3, 'auto': 0, 'forceOrIsMaster': 2, 'preferSlave': 5, 'forceSyncEAuto': 1.
                       mbgLtNgCfgPtpMiscEnable1Step 1.3.6.1.4.1.5597.30.1.4.1.1.43 meinbergswitch read-write
Enable PTP 1 step if supported
                       mbgLtNgCfgPtpDisableMgmtMsgs 1.3.6.1.4.1.5597.30.1.4.1.1.44 meinbergswitch read-write
Disable management messages if suppported
                       mbgLtNgCfgPtpOutput1 1.3.6.1.4.1.5597.30.1.4.1.1.45 integer read-write
Additional I/O output if suppported Enumeration: 'khzGPS2048': 3, 'off': 0, 'mhz10': 2, 'ppsGPS': 5, 'pps': 1, 'mhzGPS10': 4.
                       mbgLtNgCfgPtpOutput2 1.3.6.1.4.1.5597.30.1.4.1.1.46 integer read-write
Additional I/O output if suppported Enumeration: 'khzGPS2048': 3, 'off': 0, 'mhz10': 2, 'ppsGPS': 5, 'pps': 1, 'mhzGPS10': 4.
               mbgLtNgCfgPtpCmd 1.3.6.1.4.1.5597.30.1.4.2 integer read-write
Configuration commands Enumeration: 'reset': 2, 'apply': 3, 'none': 0, 'configure': 1.
           mbgLtNgCfgSystem 1.3.6.1.4.1.5597.30.1.5
               mbgLtNgCfgGeneral 1.3.6.1.4.1.5597.30.1.5.0
                   mbgLtNgCfgWebLanguage 1.3.6.1.4.1.5597.30.1.5.0.1 integer read-only
set language for web interface Enumeration: 'notAvailable': 0, 'englisch': 1, 'german': 2.
                   mbgLtNgCfgActivateChangesAsStartup 1.3.6.1.4.1.5597.30.1.5.0.2 meinbergswitch read-write
activate changes automatically as startup configuration
               mbgLtNgCfgDisplay 1.3.6.1.4.1.5597.30.1.5.1
                   mbgLtNgCfgEnableFrontPanelLight 1.3.6.1.4.1.5597.30.1.5.1.1 meinbergswitch read-write
active light at front panel
       mbgLtNgCommands 1.3.6.1.4.1.5597.30.2
           mbgLtNgCmdExecute 1.3.6.1.4.1.5597.30.2.1 integer read-write
Send a command to the timeserver to be executed; Attention: Command should be executed with a timeout of 120 seconds and 0 retries Enumeration: 'none': 0, 'sendTestNotifications': 7, 'applyChanges': 1, 'reboot': 5, 'startFirmwareUpdate': 4, 'resendErrorConditions': 6, 'saveAndApplyChanges': 3, 'saveChanges': 2.
           mbgLtNgCmdSetTime 1.3.6.1.4.1.5597.30.2.2 displaystring read-write
Reference time can be set via a date-time string in format: yyyy-mm-dd hh:mm:ss Time is interpreted as configured via web interface at menu: 'Receiver'->'Time Zone' It is mandatory to unplug the receiver's antenna to make this work. and strongly advised to execute a SNMPSET WITHOUT retries and a timeout value greater than 60 seconds. Otherwise there might come up unforeseen issues. SNMPGET always returns default value.
       mbgLtNgTrapNotifications 1.3.6.1.4.1.5597.30.3
           mbgLtNgTraps 1.3.6.1.4.1.5597.30.3.0
               mbgLtNgTrapNTPNotSync 1.3.6.1.4.1.5597.30.3.0.1
trap to be sent when NTP is not synchronised
               mbgLtNgTrapNTPStopped 1.3.6.1.4.1.5597.30.3.0.2
trap to be sent when NTP is stopped
               mbgLtNgTrapServerBoot 1.3.6.1.4.1.5597.30.3.0.3
trap to be sent when time server has finished boot sequence
               mbgLtNgTrapReceiverNotResponding 1.3.6.1.4.1.5597.30.3.0.4
trap to be sent when receiver is not responding
               mbgLtNgTrapReceiverNotSync 1.3.6.1.4.1.5597.30.3.0.5
trap to be sent when receiver is not synchronised
               mbgLtNgTrapAntennaFaulty 1.3.6.1.4.1.5597.30.3.0.6
trap to be sent when connection to antenna is broken
               mbgLtNgTrapAntennaReconnect 1.3.6.1.4.1.5597.30.3.0.7
trap to be sent when antenna has been reconnected
               mbgLtNgTrapConfigChanged 1.3.6.1.4.1.5597.30.3.0.8
trap to be sent when timeserver reloaded its configuration
               mbgLtNgTrapLeapSecondAnnounced 1.3.6.1.4.1.5597.30.3.0.9
trap to be sent when a leap second has been announced
               mbgLtNgTrapSHSTimeLimitError 1.3.6.1.4.1.5597.30.3.0.10
trap to be sent when SHS timelimit exceeded
               mbgLtNgTrapSecondaryRecNotSync 1.3.6.1.4.1.5597.30.3.0.11
trap to be sent when secondary receiver in SHS system is not synchronised
               mbgLtNgTrapPowerSupplyFailure 1.3.6.1.4.1.5597.30.3.0.12
trap to be sent when one of the redundant power supplies fails
               mbgLtNgTrapAntennaShortCircuit 1.3.6.1.4.1.5597.30.3.0.13
trap to be sent when a connected antenna fails due to a short circuit
               mbgLtNgTrapReceiverSync 1.3.6.1.4.1.5597.30.3.0.14
trap to be sent when receiver is synchronised
               mbgLtNgTrapNTPClientAlarm 1.3.6.1.4.1.5597.30.3.0.15
trap to be sent when an NTP Client Monitoring alarm occurs, e.g. when a monitored client is not reachable.
               mbgLtNgTrapPowerSupplyUp 1.3.6.1.4.1.5597.30.3.0.16
trap to be sent when a power supply returned to a healthy state.
               mbgLtNgTrapNetworkDown 1.3.6.1.4.1.5597.30.3.0.17
trap to be sent when a monitored network port is down.
               mbgLtNgTrapNetworkUp 1.3.6.1.4.1.5597.30.3.0.18
trap to be sent when a monitored network port is up.
               mbgLtNgTrapSecondaryRecNotResp 1.3.6.1.4.1.5597.30.3.0.19
trap to be sent when secondary receiver is not responding
               mbgLtNgTrapXmrLimitExceeded 1.3.6.1.4.1.5597.30.3.0.30
trap to be sent when a reference offset exceeds the configured limit
               mbgLtNgTrapXmrRefDisconnect 1.3.6.1.4.1.5597.30.3.0.31
trap to be sent when a reference signal has been lost
               mbgLtNgTrapXmrRefReconnect 1.3.6.1.4.1.5597.30.3.0.32
trap to be sent when a reference signal recovered
               mbgLtNgTrapFdmError 1.3.6.1.4.1.5597.30.3.0.33
trap to be sent when the Fdm module generates an alarm
               mbgLtNgTrapSHSTimeLimitWarning 1.3.6.1.4.1.5597.30.3.0.34
trap to be sent when SHS warning limit exceeded
               mbgLtNgTrapSecondaryRecSync 1.3.6.1.4.1.5597.30.3.0.35
trap to be sent when secondary receiver is synchronised
               mbgLtNgTrapNTPSync 1.3.6.1.4.1.5597.30.3.0.36
trap to be sent when NTP is synchronised
               mbgLtNgTrapPtpPortDisconnected 1.3.6.1.4.1.5597.30.3.0.37
trap to be sent when PTP network port got disconnected
               mbgLtNgTrapPtpPortConnected 1.3.6.1.4.1.5597.30.3.0.38
trap to be sent when PTP network port got connected
               mbgLtNgTrapPtpStateChanged 1.3.6.1.4.1.5597.30.3.0.39
trap to be sent when PTP state changed (e.g. from 'passive' to 'master')
               mbgLtNgTrapPtpError 1.3.6.1.4.1.5597.30.3.0.40
trap to be sent when PTP raised an error
               mbgLtNgTrapLowSystemResources 1.3.6.1.4.1.5597.30.3.0.41
trap to be sent when system is running on low resources
               mbgLtNgTrapFanDown 1.3.6.1.4.1.5597.30.3.0.45
trap to be sent when fan goes down
               mbgLtNgTrapFanUp 1.3.6.1.4.1.5597.30.3.0.46
trap to be sent when fan comes up
               mbgLtNgTrapCertificateExpired 1.3.6.1.4.1.5597.30.3.0.47
trap to be sent when certificate expired or will expire
               mbgLtNgTrapSufficientSystemResources 1.3.6.1.4.1.5597.30.3.0.48
trap to be sent when system has regained sufficient resources
               mbgLtNgTrapOscillatorWarmedUp 1.3.6.1.4.1.5597.30.3.0.49
trap to be sent when oscillator is not warmed up
               mbgLtNgTrapOscillatorNotWarmedUp 1.3.6.1.4.1.5597.30.3.0.50
trap to be sent when oscillator is warmed up
               mbgLtNgTrapXmrRefChanged 1.3.6.1.4.1.5597.30.3.0.51
trap to be sent when XMR reference source changed
               mbgLtNgTrapClusterMasterChanged 1.3.6.1.4.1.5597.30.3.0.52
trap to be sent when cluster mode is active and cluster changed
               mbgLtNgTrapClusterFalsetickerDetected 1.3.6.1.4.1.5597.30.3.0.53
trap to be sent when cluster mode is active and a cluster member is dectected as falseticker
               mbgLtNgTrapClusterFalsetickerCleared 1.3.6.1.4.1.5597.30.3.0.54
trap to be sent when cluster mode is active and a cluster member is no longer a falseticker
               mbgLtNgTrapSHSTimeLimitOk 1.3.6.1.4.1.5597.30.3.0.55
trap to be sent when SHS timelimit error has been acknowledged or time difference drops below warning limit.
               mbgLtNgTrapIMSError 1.3.6.1.4.1.5597.30.3.0.56
trap to be sent when an IMS module is not responsive anymore, has got temperature issues, etc. ...
               mbgLtNgTrapIMSOk 1.3.6.1.4.1.5597.30.3.0.57
trap to be sent when an IMS module returns to healthy state.
               mbgLtNgTrapFDMOk 1.3.6.1.4.1.5597.30.3.0.58
trap to be sent when an FDM module returns to healthy state.
               mbgLtNgTrapNTPOffsetLimitExceeded 1.3.6.1.4.1.5597.30.3.0.59
trap to be sent when monitoring an NTP client and its offset limit is exceeded
               mbgLtNgTrapNTPOffsetLimitOk 1.3.6.1.4.1.5597.30.3.0.60
trap to be sent when monitoring an NTP client and its offset limit is back again in a valid range
               mbgLtNgTrapNormalOperation 1.3.6.1.4.1.5597.30.3.0.77
trap to be sent when the system returned to a healthy state
               mbgLtNgTrapHeartbeat 1.3.6.1.4.1.5597.30.3.0.88
trap to be sent periodically to indicate that time server is still alive
               mbgLtNgTrapTestNotification 1.3.6.1.4.1.5597.30.3.0.99
trap to be sent when a test notification has been requested
               mbgLtNgTrapMessage 1.3.6.1.4.1.5597.30.3.0.100 displaystring read-only
used as a payload object for all traps, holds a clear text event message
       mbgLtNgConformance 1.3.6.1.4.1.5597.30.90
             mbgLtNgCompliances 1.3.6.1.4.1.5597.30.90.1
                 mbgLtNgCompliance 1.3.6.1.4.1.5597.30.90.1.1
The compliance statement for SNMP entities which implement version 2 of the LANTIME MIB
             mbgLtNgGroups 1.3.6.1.4.1.5597.30.90.2
                 mbgLtNgObjectsGroup 1.3.6.1.4.1.5597.30.90.2.1
The collection of objects for the LANTIME MIB
                 mbgLtNgTrapsGroup 1.3.6.1.4.1.5597.30.90.2.2
The collection of traps for the LANTIME MIB