LLDP-EXT-HM-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: LLDP-EXT-HM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, LLDP-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 lldpXHmMIB 1.0.8802.1.1.2.1.5.32867
The LLDP Management Information Base extension module for Hirschmann organizationally defined discovery information. In order to assure the uniqueness of the LLDP-MIB, lldpXHmMIB is branched from lldpExtensions using the Hirschmann OUI value as the node. Copyright (C) 2008. All Rights Reserved.
             lldpXHmObjects 1.0.8802.1.1.2.1.5.32867.1
                 lldpXHmConfig 1.0.8802.1.1.2.1.5.32867.1.1
                     lldpXHmConfigGMRPTable 1.0.8802.1.1.2.1.5.32867.1.1.1 no-access
A table that controls GMRP LLDP TLV Information to be transmitted on individual ports.
                         lldpXHmConfigGMRPEntry 1.0.8802.1.1.2.1.5.32867.1.1.1.1 no-access
LLDP configuration information that controls the transmission of Hirschmann GMRP organizationally defined Configuration TLV on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpConfigEntry must be restored from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system.
                             lldpXHmConfigGMRPTxEnable 1.0.8802.1.1.2.1.5.32867.1.1.1.1.1 truthvalue read-write
The lldpXHmConfigGMRPTxEnable, which is defined as a truth value and configured by the network management, determines whether the Hirschmann GMRP organizationally defined port TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
                     lldpXHmConfigIGMPTable 1.0.8802.1.1.2.1.5.32867.1.1.2 no-access
A table that controls IGMP LLDP TLV Information to be transmitted on individual ports.
                         lldpXHmConfigIGMPEntry 1.0.8802.1.1.2.1.5.32867.1.1.2.1 no-access
LLDP configuration information that controls the transmission of Hirschmann IGMP organizationally defined Configuration TLV on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpConfigEntry must be restored from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system.
                             lldpXHmConfigIGMPTxEnable 1.0.8802.1.1.2.1.5.32867.1.1.2.1.1 truthvalue read-write
The lldpXHmConfigIGMPTxEnable, which is defined as a truth value and configured by the network management, determines whether the Hirschmann IGMP organizationally defined port TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
                     lldpXHmConfigPortSecTable 1.0.8802.1.1.2.1.5.32867.1.1.3 no-access
A table that controls 802.1X Port Security LLDP TLV Information to be transmitted on individual ports.
                         lldpXHmConfigPortSecEntry 1.0.8802.1.1.2.1.5.32867.1.1.3.1 no-access
LLDP configuration information that controls the transmission of Hirschmann 802.1X Port Security organizationally defined Configuration TLV on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpConfigEntry must be restored from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system.
                             lldpXHmConfigPortSecTxEnable 1.0.8802.1.1.2.1.5.32867.1.1.3.1.1 truthvalue read-write
The lldpXHmConfigPortSecTxEnable, which is defined as a truth value and configured by the network management, determines whether the Hirschmann 802.1X Port Security organizationally defined port TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
                     lldpXHmConfigPTPTable 1.0.8802.1.1.2.1.5.32867.1.1.4 no-access
A table that controls PTP LLDP TLV Information to be transmitted on individual ports.
                         lldpXHmConfigPTPEntry 1.0.8802.1.1.2.1.5.32867.1.1.4.1 no-access
LLDP configuration information that controls the transmission of Hirschmann PTP organizationally defined Configuration TLV on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpConfigEntry must be restored from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system.
                             lldpXHmConfigPTPTxEnable 1.0.8802.1.1.2.1.5.32867.1.1.4.1.1 truthvalue read-write
The lldpXHmConfigPTPTxEnable, which is defined as a truth value and configured by the network management, determines whether the Hirschmann PTP organizationally defined port TLV transmission is allowed on a given LLDP transmission capable port. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
                 lldpXHmLocalData 1.0.8802.1.1.2.1.5.32867.1.2
                     lldpXHmLocGMRPTable 1.0.8802.1.1.2.1.5.32867.1.2.1 no-access
This table contains one or more rows per Port and GMRP information about each port of the local system. GMRP is a protocol used for constraining IP Multicast traffic defined by the IEEE in standard 802.1p, published in standard 802.1D
                         lldpXHmLocGMRPEntry 1.0.8802.1.1.2.1.5.32867.1.2.1.1 no-access
GMRP Information about a particular port component.
                             lldpXHmLocGMRPSupport 1.0.8802.1.1.2.1.5.32867.1.2.1.1.1 truthvalue read-only
The truth value used to indicate whether the given port (associated with the local system) supports GMRP. If this is set to (false), all following fields should be set to not applicable and should not be evaluated.
                             lldpXHmLocGMRPStatus 1.0.8802.1.1.2.1.5.32867.1.2.1.1.2 truthvalue read-only
The truth value used to indicate whether GMRP is enabled on the the given port associated with the local system. If this is set to (false), all following fields should be set to not applicable and should not be evaluated.
                             lldpXHmLocGMRPServiceReq 1.0.8802.1.1.2.1.5.32867.1.2.1.1.3 lldpxhmlocgmrpservicereqsyntax read-only
Integer value, used to indicate which GMRP service requirement is enabled on the the given port associated with the local system.
                     lldpXHmLocIGMPTable 1.0.8802.1.1.2.1.5.32867.1.2.2 no-access
This table contains one or more rows per Port and IGMP information about each port of the local system. IGMP is a protocol used for constraining IP multicast traffic specified in IETF RFCs 1112, 2236(IGMPv2) and 3376(IGMPv3)
                         lldpXHmLocIGMPEntry 1.0.8802.1.1.2.1.5.32867.1.2.2.1 no-access
IGMP Information about a particular port component.
                             lldpXHmLocIGMPSupport 1.0.8802.1.1.2.1.5.32867.1.2.2.1.1 truthvalue read-only
The truth value used to indicate whether the given port (associated with the local system) supports IGMP. If this is set to (false), all following fields should be set to not applicable and should not be evaluated.
                             lldpXHmLocIGMPStatus 1.0.8802.1.1.2.1.5.32867.1.2.2.1.2 truthvalue read-only
The truth value used to indicate whether IGMP is enabled on the the given port associated with the local system. If this is set to (false), all following fields should be set to not applicable and should not be evaluated.
                             lldpXHmLocIGMPVersion 1.0.8802.1.1.2.1.5.32867.1.2.2.1.3 lldpxhmlocigmpversionsyntax read-only
This bitmap shows which IGMP version is configured on the local device.
                     lldpXHmLocPortSecTable 1.0.8802.1.1.2.1.5.32867.1.2.3 no-access
This table contains one or more rows per Port and 802.1X Port Security information about each port of the local system. IEEE 802.1X Port Security is a standard, defining rules for a port based network access control with a client/supplicant requesting access to the network from an authenticator/RADIUS server
                         lldpXHmLocPortSecEntry 1.0.8802.1.1.2.1.5.32867.1.2.3.1 no-access
802.1X Port Security Information about a particular port component.
                             lldpXHmLocPortSecSupport 1.0.8802.1.1.2.1.5.32867.1.2.3.1.1 truthvalue read-only
The truth value used to indicate whether the given port (associated with the local system) supports 802.1X Port Security. If this is set to (false), all following fields should be set to not applicable and should not be evaluated.
                             lldpXHmLocPortSecStatus 1.0.8802.1.1.2.1.5.32867.1.2.3.1.2 truthvalue read-only
The truth value used to indicate whether 802.1X Port Security is enabled on the the given port associated with the local system. If this is set to (false), all following fields should be set to not applicable and should not be evaluated.
                             lldpXHmLocPortSecMode 1.0.8802.1.1.2.1.5.32867.1.2.3.1.3 lldpxhmlocportsecmodesyntax read-only
This Integer value contains informations about a local ports 802.1X configuration.
                     lldpXHmLocPTPTable 1.0.8802.1.1.2.1.5.32867.1.2.4 no-access
This table contains one or more rows per Port and PTP information about the local system. The Precision Time Protocol (PTP) is defined in IEEE Standard 1588 and describes a protocol for network (system) clock synchronization with very high precision.
                         lldpXHmLocPTPEntry 1.0.8802.1.1.2.1.5.32867.1.2.4.1 no-access
Port and PTP Information about a particular port component
                             lldpXHmLocPTPSupport 1.0.8802.1.1.2.1.5.32867.1.2.4.1.1 lldpxhmlocptpsupportsyntax read-only
This bitmap shows which PTP versions are supported by the local system, based on installed hardware
                             lldpXHmLocPTPStatus 1.0.8802.1.1.2.1.5.32867.1.2.4.1.2 lldpxhmlocptpstatussyntax read-only
This bitmap shows which PTP versions are enabled on the local system
                             lldpXHmLocPTPSyncInterval 1.0.8802.1.1.2.1.5.32867.1.2.4.1.3 integer32 read-only
This Integer shows the PTPv1 and PTPv2 Synchronization Interval. If no PTP is available or configured, this value should be set to -128.
                             lldpXHmLocPTPv2AnnounceInterval 1.0.8802.1.1.2.1.5.32867.1.2.4.1.4 integer32 read-only
This Integer shows the PTPv2 Announce Interval. If PTPv2 is not configured or available, this should be set to -128.
                             lldpXHmLocPTPv2DataTransfer 1.0.8802.1.1.2.1.5.32867.1.2.4.1.5 lldpxhmlocptpv2datatransfersyntax read-only
This Integer shows the enabled PTPv2 data transfer method.
                             lldpXHmLocPTPv2DelayMechanism 1.0.8802.1.1.2.1.5.32867.1.2.4.1.6 lldpxhmlocptpv2delaymechanismsyntax read-only
This Integer shows the enabled PTPv2 delay mechanism
                             lldpXHmLocPTPClockValues 1.0.8802.1.1.2.1.5.32867.1.2.4.1.7 bits read-only
This bitmap shows, which clock type(s) are configured on a specific port and/or device: Bit (0) set to 1 indicates a slave clock Bit (1) set to 1 indicates a master clock Bit (2) set to 1 indicates a transparent clock Bit (3) set to 1 indicates a boundary clock Bit (4) set to 1 indicates a grandmaster clock Bit (5) set to 1 indicates a clock in multi domain mode Bit (6) set to 1 indicates a clock in simple mode If no PTP is configured, all bits should be set to 0. Bits: 'multidomain': 5, 'slave': 0, 'grandmaster': 4, 'simplemode': 6, 'master': 1, 'boundary': 3, 'transparent': 2.
                             lldpXHmLocPTPv2SubdomainNumber 1.0.8802.1.1.2.1.5.32867.1.2.4.1.8 integer32 read-only
This Integer shows the PTPv2 subdomain number configured on the local device. In case PTPv1 is configured, this value is of no relevance and will not be evaluated.
                             lldpXHmLocPTPv1SubdomainName 1.0.8802.1.1.2.1.5.32867.1.2.4.1.9 octet string read-only
This Octet String contains the PTPv1 subdomain name, an ASCII String with a maximum of 16 characters length, configured on the local device. If PTPv2 or no PTP is configured, this should be set to 0.
                 lldpXHmRemoteData 1.0.8802.1.1.2.1.5.32867.1.3
                     lldpXHmRemGMRPTable 1.0.8802.1.1.2.1.5.32867.1.3.1 no-access
This table contains one or more rows per Port and GMRP information about the remote system. GMRP is a protocol used for constraining IP Multicast traffic defined by the IEEE in standard 802.1p, published in standard 802.1D
                         lldpXHmRemGMRPEntry 1.0.8802.1.1.2.1.5.32867.1.3.1.1 no-access
GMRP Information about a particular port component.
                             lldpXHmRemGMRPSupport 1.0.8802.1.1.2.1.5.32867.1.3.1.1.1 truthvalue read-only
The truth value used to indicate whether the given port (associated with the remote system) supports GMRP. If this is set to (false), all following fields should be set to not applicable and should not be evaluated.
                             lldpXHmRemGMRPStatus 1.0.8802.1.1.2.1.5.32867.1.3.1.1.2 truthvalue read-only
The truth value used to indicate whether GMRP is enabled on the the given port associated with the remote system. If this is set to (false), all following fields should be set to not applicable and should not be evaluated.
                             lldpXHmRemGMRPServiceReq 1.0.8802.1.1.2.1.5.32867.1.3.1.1.3 lldpxhmremgmrpservicereqsyntax read-only
Integer value, used to indicate which GMRP service requirement is enabled on the the given port associated with the remote system.
                     lldpXHmRemIGMPTable 1.0.8802.1.1.2.1.5.32867.1.3.2 no-access
This table contains one or more rows per Port and IGMP information about each port of the remote system. IGMP is a protocol used for constraining IP multicast traffic specified in IETF RFCs 1112, 2236(IGMPv2) and 3376(IGMPv3)
                         lldpXHmRemIGMPEntry 1.0.8802.1.1.2.1.5.32867.1.3.2.1 no-access
IGMP Information about a particular port component.
                             lldpXHmRemIGMPSupport 1.0.8802.1.1.2.1.5.32867.1.3.2.1.1 truthvalue read-only
The truth value used to indicate whether the given port (associated with the remote system) supports IGMP. If this is set to (false), all following fields should be set to not applicable and should not be evaluated.
                             lldpXHmRemIGMPStatus 1.0.8802.1.1.2.1.5.32867.1.3.2.1.2 truthvalue read-only
The truth value used to indicate whether IGMP is enabled on the the given port associated with the remote system. If this is set to (false), all following fields should be set to not applicable and should not be evaluated.
                             lldpXHmRemIGMPVersion 1.0.8802.1.1.2.1.5.32867.1.3.2.1.3 lldpxhmremigmpversionsyntax read-only
This bitmap shows which IGMP version is configured on the remote device.
                     lldpXHmRemPortSecTable 1.0.8802.1.1.2.1.5.32867.1.3.3 no-access
This table contains one or more rows per Port and 802.1X Port Security information about each port of the remote system. IEEE 802.1X Port Security is a standard, defining rules for a port based network access control with a client/supplicant requesting access to the network from an authenticator/RADIUS server
                         lldpXHmRemPortSecEntry 1.0.8802.1.1.2.1.5.32867.1.3.3.1 no-access
802.1X Port Security Information about a particular port component.
                             lldpXHmRemPortSecSupport 1.0.8802.1.1.2.1.5.32867.1.3.3.1.1 truthvalue read-only
The truth value used to indicate whether the given port (associated with the remote system) supports 802.1X Port Security. If this is set to (false), all following fields should be set to not applicable and should not be evaluated.
                             lldpXHmRemPortSecStatus 1.0.8802.1.1.2.1.5.32867.1.3.3.1.2 truthvalue read-only
The truth value used to indicate whether 802.1X Port Security is enabled on the the given port associated with the remote system. If this is set to (false), all following fields should be set to not applicable and should not be evaluated.
                             lldpXHmRemPortSecMode 1.0.8802.1.1.2.1.5.32867.1.3.3.1.3 lldpxhmremportsecmodesyntax read-only
This Integer value contains informations about a remote ports 802.1X configuration.
                     lldpXHmRemPTPTable 1.0.8802.1.1.2.1.5.32867.1.3.4 no-access
This table contains one or more rows per Port and PTP information about the remote system. The Precision Time Protocol (PTP) is defined in IEEE Standard 1588 and describes a protocol for network (system) clock synchronization with very high precision.
                         lldpXHmRemPTPEntry 1.0.8802.1.1.2.1.5.32867.1.3.4.1 no-access
Port and PTP Information about a particular port component
                             lldpXHmRemPTPSupport 1.0.8802.1.1.2.1.5.32867.1.3.4.1.1 lldpxhmremptpsupportsyntax read-only
Shows which PTP versions are supported by the remote system, based on installed hardware
                             lldpXHmRemPTPStatus 1.0.8802.1.1.2.1.5.32867.1.3.4.1.2 lldpxhmremptpstatussyntax read-only
Shows which PTP versions are enabled on the remote system
                             lldpXHmRemPTPSyncInterval 1.0.8802.1.1.2.1.5.32867.1.3.4.1.3 integer32 read-only
Shows the PTPv1 and PTPv2 Synchronization Interval. If no PTP is available or configured, this value should be set to -128.
                             lldpXHmRemPTPv2AnnounceInterval 1.0.8802.1.1.2.1.5.32867.1.3.4.1.4 integer32 read-only
Shows the PTPv2 Announce Interval. If PTPv2 is not configured or available, this should be set to -128.
                             lldpXHmRemPTPv2DataTransfer 1.0.8802.1.1.2.1.5.32867.1.3.4.1.5 lldpxhmremptpv2datatransfersyntax read-only
This field is only viable if PTPv2 is enabled. It shows the data transfer type configured on the remote port and device.
                             lldpXHmRemPTPv2DelayMechanism 1.0.8802.1.1.2.1.5.32867.1.3.4.1.6 lldpxhmremptpv2delaymechanismsyntax read-only
Shows the enabled PTPv2 delay mechanism
                             lldpXHmRemPTPClockValues 1.0.8802.1.1.2.1.5.32867.1.3.4.1.7 bits read-only
Shows, which clock type(s) are configured on a specific remote port and/or device: Bit (0) set to 1 indicates a slave clock Bit (1) set to 1 indicates a master clock Bit (2) set to 1 indicates a transparent clock Bit (3) set to 1 indicates a boundary clock Bit (4) set to 1 indicates a grandmaster clock Bit (5) set to 1 indicates a clock in multi domain mode Bit (6) set to 1 indicates a clock in simple mode If no PTP is configured, all bits should be set to 0. Bits: 'multidomain': 5, 'slave': 0, 'grandmaster': 4, 'simplemode': 6, 'master': 1, 'boundary': 3, 'transparent': 2.
                             lldpXHmRemPTPv2SubdomainNumber 1.0.8802.1.1.2.1.5.32867.1.3.4.1.8 integer32 read-only
Shows the PTPv2 subdomain number configured on the remote device. In case PTPv1 is configured, this value is of no relevance and will not be evaluated.
                             lldpXHmRemPTPv1SubdomainName 1.0.8802.1.1.2.1.5.32867.1.3.4.1.9 octet string read-only
This Octet String contains the PTPv1 subdomain name, an ASCII String with a maximum of 16 characters length, configured on the remote device. If PTPv2 is configured, this field should be set to 0.