Juniper-PPP-CONF: View SNMP OID List / Download MIB

VENDOR: JUNIPER


 Home MIB: Juniper-PPP-CONF
Download as:   
SNMPv2-CONF, SNMPv2-SMI, Juniper-Agents, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 juniPppAgent 1.3.6.1.4.1.4874.5.2.32
The agent capabilities definitions for the point-to-point protocol (PPP) component of the SNMP agent in the Juniper E-series family of products.
       juniPppAgentV1 1.3.6.1.4.1.4874.5.2.32.1
The MIBs supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when the multilink capabilities were separated out.
       juniPppGeneralAgent 1.3.6.1.4.1.4874.5.2.32.2
The registration group of agent capabilities for the general functionality of the PPP application which provides management support for basic (non-multi-link) PPP interfaces via SNMP.
           juniPppGeneralAgentV1 1.3.6.1.4.1.4874.5.2.32.2.1
The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. These capabilities became obsolete when new LCP and IP objects were added to the Juniper-PPP-MIB.
           juniPppGeneralAgentV2 1.3.6.1.4.1.4874.5.2.32.2.2
The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. These capabilities became obsolete when new LCP objects were added to the Juniper-PPP-MIB.
           juniPppGeneralAgentV3 1.3.6.1.4.1.4874.5.2.32.2.3
The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. These capabilities became obsolete when IPv6 support was added.
           juniPppGeneralAgentV4 1.3.6.1.4.1.4874.5.2.32.2.4
The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. These capabilities became obsolete when new objects were added.
           juniPppGeneralAgentV5 1.3.6.1.4.1.4874.5.2.32.2.5
The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. These capabilities became obsolete when new objects were added.
           juniPppGeneralAgentV6 1.3.6.1.4.1.4874.5.2.32.2.6
The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. These capabilities became obsolete when new objects were added.
           juniPppGeneralAgentV7 1.3.6.1.4.1.4874.5.2.32.2.7
The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe.
           juniPppGeneralAgentV8 1.3.6.1.4.1.4874.5.2.32.2.8
The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe.These capabilities became obsolete when new objects were added.
           juniPppGeneralAgentV9 1.3.6.1.4.1.4874.5.2.32.2.9
The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe.
       juniPppMultiLinkAgent 1.3.6.1.4.1.4874.5.2.32.3
The registration group of agent capabilities for the multi-link functionality of the PPP application which provides management support for multi-link PPP interfaces via SNMP.
           juniPppMultiLinkAgentV1 1.3.6.1.4.1.4874.5.2.32.3.1
The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIB.
           juniPppMultiLinkAgentV2 1.3.6.1.4.1.4874.5.2.32.3.2
The MIBs supported by the SNMP agent for the basic PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIB
           juniPppMultiLinkAgentV3 1.3.6.1.4.1.4874.5.2.32.3.3
The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIB
           juniPppMultiLinkAgentV4 1.3.6.1.4.1.4874.5.2.32.3.4
The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when IPv6 support was added.
           juniPppMultiLinkAgentV5 1.3.6.1.4.1.4874.5.2.32.3.5
The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIB.
           juniPppMultiLinkAgentV6 1.3.6.1.4.1.4874.5.2.32.3.6
The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIB.
           juniPppMultiLinkAgentV7 1.3.6.1.4.1.4874.5.2.32.3.7
The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIB.
           juniPppMultiLinkAgentV8 1.3.6.1.4.1.4874.5.2.32.3.8
The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIB.
           juniPppMultiLinkAgentV9 1.3.6.1.4.1.4874.5.2.32.3.9
The MIB groups supported by the SNMP agent for the PPP application in JUNOSe. These capabilities became obsolete when new multi-link objects were added to the Juniper-PPP-MIB.
           juniPppMultiLinkAgentV10 1.3.6.1.4.1.4874.5.2.32.3.10
The MIB groups supported by the SNMP agent for the PPP application in JUNOSe.