JUNIPER-WX-MIB: View SNMP OID List / Download MIB

VENDOR: PERIBIT NETWORKS


 Home MIB: JUNIPER-WX-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, JUNIPER-WX-GLOBAL-TC, JUNIPER-WX-GLOBAL-REG, JUNIPER-WX-COMMON-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 jnxWxMibModule 1.3.6.1.4.1.8239.1.1.4
A MIB module containing definitions of managed objects for Juniper Networks' WAN Acceleration family of products.
 jnxWxMib 1.3.6.1.4.1.8239.2.2.1
Sub-tree for WAN Acceleration MIB.
     jnxWxConfMib 1.3.6.1.4.1.8239.2.2.1.1
Sub-tree for WAN Acceleration MIB conformance statements.
     jnxWxObjs 1.3.6.1.4.1.8239.2.2.1.2
Sub-tree for WAN Acceleration MIB objects.
         jnxWxStatsUpdateTime 1.3.6.1.4.1.8239.2.2.1.2.1 timestamp read-only
This is the value of sysUpTime when the WX stats (jnxWxSysStats, jnxWxAsm, jnxWxApp) were last updated. The management station can use this information to tell if it's downloading a consistent set of stats.
         jnxWxStatsAsmCount 1.3.6.1.4.1.8239.2.2.1.2.2 integer32 read-only
The number of Decompressors this Compressor has had a session with at any time during the last two months.
         jnxWxStatsAppCount 1.3.6.1.4.1.8239.2.2.1.2.3 integer32 read-only
The number of applications currently being monitored on this Compressor.
         jnxWxSysStats 1.3.6.1.4.1.8239.2.2.1.2.4
Sub-tree for WAN Acceleration system statistics.
             jnxWxSysStatsBytesInAe 1.3.6.1.4.1.8239.2.2.1.2.4.1 counter64 read-only
Total number of bytes that entered the WX Assembly Engine since the system was started.
             jnxWxSysStatsBytesOutAe 1.3.6.1.4.1.8239.2.2.1.2.4.2 counter64 read-only
Total number of bytes that exited the WX Assembly Engine after assembly since the system was started.
             jnxWxSysStatsPktsInAe 1.3.6.1.4.1.8239.2.2.1.2.4.3 counter64 read-only
Total number of packets that entered the WX Assembly Engine since the system was started.
             jnxWxSysStatsPktsOutAe 1.3.6.1.4.1.8239.2.2.1.2.4.4 counter64 read-only
Total number of packets that exited the WX Assembly Engine after assembly since the system was started.
             jnxWxSysStatsBytesOutOob 1.3.6.1.4.1.8239.2.2.1.2.4.5 counter64 read-only
Total number of out-of-band bytes sent to the control channel since the system was started.
             jnxWxSysStatsBytesPtNoAe 1.3.6.1.4.1.8239.2.2.1.2.4.6 counter64 read-only
Total number of bytes that passed through the WX Compression Engine because there was no corresponding Assembly Engine WX, since the system was started.
             jnxWxSysStatsPktsPtNoAe 1.3.6.1.4.1.8239.2.2.1.2.4.7 counter64 read-only
Total number of packets that passed through the WX Compression Engine because there was no corresponding Assembly Engine WX, since the system was started.
             jnxWxSysStatsBytesPtFilter 1.3.6.1.4.1.8239.2.2.1.2.4.8 counter64 read-only
Total number of bytes that passed through the WX Compression Engine due to a manually configured filter (such as an application filter), since the system was started.
             jnxWxSysStatsPktsPtFilter 1.3.6.1.4.1.8239.2.2.1.2.4.9 counter64 read-only
Total number of packets that passed through the WX Compression Engine due to a manually configured filter (such as an application filter), since the system was started.
             jnxWxSysStatsBytesOfPt 1.3.6.1.4.1.8239.2.2.1.2.4.10 counter64 read-only
Total number of bytes that passed through the WX Compression Engine due to device buffer overflow, since the system was started.
             jnxWxSysStatsPktsOfPt 1.3.6.1.4.1.8239.2.2.1.2.4.11 counter64 read-only
Total number of packets that passed through the WX Compression Engine due to device buffer overflow, since the system was started.
             jnxWxSysStatsBytesTpIn 1.3.6.1.4.1.8239.2.2.1.2.4.12 counter64 read-only
The number of bytes into the WX Compression Engine at the peak five-second interval of data input, since the system was started.
             jnxWxSysStatsPktsTpIn 1.3.6.1.4.1.8239.2.2.1.2.4.13 counter64 read-only
The number of packets into the WX Compression Engine at the peak five-second interval of data input, since the system was started.
             jnxWxSysStatsBytesTpOut 1.3.6.1.4.1.8239.2.2.1.2.4.14 counter64 read-only
The number of bytes out of the WX Compression Engine at the peak five-second interval of data input, since the system was started.
             jnxWxSysStatsPktsTpOut 1.3.6.1.4.1.8239.2.2.1.2.4.15 counter64 read-only
The number of packets out of the WX Compression Engine at the peak five-second interval of data input, since the system was started.
             jnxWxSysStatsBytesTpPt 1.3.6.1.4.1.8239.2.2.1.2.4.16 counter64 read-only
The number of bytes that passed through the WX Compression Engine at the peak five-second interval of data input, since the system was started.
             jnxWxSysStatsPktsTpPt 1.3.6.1.4.1.8239.2.2.1.2.4.17 counter64 read-only
The number of packets that passed through the WX Compression Engine at the peak five-second interval of data input, since the system was started.
             jnxWxSysStatsPeakRdn 1.3.6.1.4.1.8239.2.2.1.2.4.18 unsigned32 read-only
The maximum data reduction rate for a five second interval in the last minute. The value returned is (percentage * 1000). Applications should divide the returned value by 1000.
             jnxWxSysStatsThruputIn 1.3.6.1.4.1.8239.2.2.1.2.4.19 gauge32 read-only
Average throughput of incoming data in Kbps since the system was started.
             jnxWxSysStatsThruputOut 1.3.6.1.4.1.8239.2.2.1.2.4.20 gauge32 read-only
Average throughput of outgoing data in Kbps since the system was started.
             jnxWxSysStatsBytesInRe 1.3.6.1.4.1.8239.2.2.1.2.4.21 counter64 read-only
Total number of bytes that entered the WX Compression Engine since the system was started.
             jnxWxSysStatsBytesOutRe 1.3.6.1.4.1.8239.2.2.1.2.4.22 counter64 read-only
Total number of bytes that exited the WX Compression Engine after reduction since the system was started.
             jnxWxSysStatsPktsInRe 1.3.6.1.4.1.8239.2.2.1.2.4.23 counter64 read-only
Total number of packets that entered the WX Compression Engine since the system was started.
             jnxWxSysStatsPktsOutRe 1.3.6.1.4.1.8239.2.2.1.2.4.24 counter64 read-only
Total number of packets that exited the WX Compression Engine after reduction since the system was started.
             jnxWxSysStatsPktSizeIn1 1.3.6.1.4.1.8239.2.2.1.2.4.25 counter64 read-only
             jnxWxSysStatsPktSizeIn2 1.3.6.1.4.1.8239.2.2.1.2.4.26 counter64 read-only
             jnxWxSysStatsPktSizeIn3 1.3.6.1.4.1.8239.2.2.1.2.4.27 counter64 read-only
             jnxWxSysStatsPktSizeIn4 1.3.6.1.4.1.8239.2.2.1.2.4.28 counter64 read-only
             jnxWxSysStatsPktSizeIn5 1.3.6.1.4.1.8239.2.2.1.2.4.29 counter64 read-only
             jnxWxSysStatsPktSizeIn6 1.3.6.1.4.1.8239.2.2.1.2.4.30 counter64 read-only
             jnxWxSysStatsPktSizeOut1 1.3.6.1.4.1.8239.2.2.1.2.4.31 counter64 read-only
             jnxWxSysStatsPktSizeOut2 1.3.6.1.4.1.8239.2.2.1.2.4.32 counter64 read-only
             jnxWxSysStatsPktSizeOut3 1.3.6.1.4.1.8239.2.2.1.2.4.33 counter64 read-only
             jnxWxSysStatsPktSizeOut4 1.3.6.1.4.1.8239.2.2.1.2.4.34 counter64 read-only
             jnxWxSysStatsPktSizeOut5 1.3.6.1.4.1.8239.2.2.1.2.4.35 counter64 read-only
             jnxWxSysStatsPktSizeOut6 1.3.6.1.4.1.8239.2.2.1.2.4.36 counter64 read-only
         jnxWxAsm 1.3.6.1.4.1.8239.2.2.1.2.5
Information maintained by a Compressor for each Decompressor it has a session with.
             jnxWxAsmTable 1.3.6.1.4.1.8239.2.2.1.2.5.1 no-access
List of Decompressors the Compressor has sessions with.
                 jnxWxAsmEntry 1.3.6.1.4.1.8239.2.2.1.2.5.1.1 no-access
A row in jnxWxAsmTable.
                     jnxWxAsmIndex 1.3.6.1.4.1.8239.2.2.1.2.5.1.1.1 integer32 no-access
This row's number, with range (1..jnxWxStatsAsmCount).
                     jnxWxAsmIpAddress 1.3.6.1.4.1.8239.2.2.1.2.5.1.1.2 ipaddress read-only
The IP address of the Decompressor.
             jnxWxAsmStatsTable 1.3.6.1.4.1.8239.2.2.1.2.5.2 no-access
Statistics maintained by a Compressor for each Decompressor it has a session with.
                 jnxWxAsmStatsEntry 1.3.6.1.4.1.8239.2.2.1.2.5.2.1 no-access
A row in jnxWxAsmStatsTable.
                     jnxWxAsmStatsPktsIn 1.3.6.1.4.1.8239.2.2.1.2.5.2.1.1 counter64 read-only
The total number of packets into this WX, since the system was started, that were identified for reduction and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches this row.
                     jnxWxAsmStatsPktsOut 1.3.6.1.4.1.8239.2.2.1.2.5.2.1.2 counter64 read-only
The total number of packets out of this WX, since the system was started, that were identified for reduction and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches this row.
                     jnxWxAsmStatsBytesIn 1.3.6.1.4.1.8239.2.2.1.2.5.2.1.3 counter64 read-only
The total number of bytes into this WX, since the system was started, that were identified for reduction and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches this row.
                     jnxWxAsmStatsBytesOut 1.3.6.1.4.1.8239.2.2.1.2.5.2.1.4 counter64 read-only
The total number of bytes out of this WX, since the system was started, that were identified for reduction and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches this row.
             jnxWxVirtEndptTable 1.3.6.1.4.1.8239.2.2.1.2.5.3 no-access
Virtual Endpoints defined in this WX
                 jnxWxVirtEndptEntry 1.3.6.1.4.1.8239.2.2.1.2.5.3.1 no-access
A row in jnxWxVirtEndptTable.
                     jnxWxVirtEndptIndex 1.3.6.1.4.1.8239.2.2.1.2.5.3.1.1 integer32 no-access
A row's number, with range (1..jnxWxStatsVirtEndptCount)
                     jnxWxVirtEndptName 1.3.6.1.4.1.8239.2.2.1.2.5.3.1.2 tcappname read-only
The name of the configured virtual endpoint
                     jnxWxVirtEndptSubnetCount 1.3.6.1.4.1.8239.2.2.1.2.5.3.1.3 integer32 read-only
The number of subnets associated with this virtual endpoint
         jnxWxApp 1.3.6.1.4.1.8239.2.2.1.2.6
Information maintained by a Compressor for each application that is monitored.
             jnxWxAppTable 1.3.6.1.4.1.8239.2.2.1.2.6.1 no-access
List of applications currently monitored.
                 jnxWxAppEntry 1.3.6.1.4.1.8239.2.2.1.2.6.1.1 no-access
A row in jnxWxAppTable.
                     jnxWxAppIndex 1.3.6.1.4.1.8239.2.2.1.2.6.1.1.1 integer32 no-access
This row's number, with range (1..jnxWxStatsAppCount).
                     jnxWxAppAppName 1.3.6.1.4.1.8239.2.2.1.2.6.1.1.2 tcappname read-only
The name of the application from which the data was received (e.g., FTP, HTTP, Lotus Notes).
             jnxWxAppStatsTable 1.3.6.1.4.1.8239.2.2.1.2.6.2 no-access
Statistics maintained by a Compressor for each application that is monitored.
                 jnxWxAppStatsEntry 1.3.6.1.4.1.8239.2.2.1.2.6.2.1 no-access
A row in jnxWxAppStatsTable. Note that the indices are from jnxWxAsmTable and jnxWxAppTable. For each Decompressor this compressor has a session with (indexed by jnxWxAsmIndex), statistics are maintained for each application that is monitored (indexed by jnxWxAppIndex).
                     jnxWxAppStatsBytesIn 1.3.6.1.4.1.8239.2.2.1.2.6.2.1.1 counter64 read-only
The total number of bytes into the WX, since the system was started, that were identified for reduction, and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches the index jnxWxAsmIndex, and that was received from the application whose name is in the row in jnxWxAppTable that matches the index jnxWxAppIndex.
                     jnxWxAppStatsBytesOut 1.3.6.1.4.1.8239.2.2.1.2.6.2.1.2 counter64 read-only
The total number of bytes out of the WX, since the system was started, that were identified for reduction, and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches the index jnxWxAsmIndex, and that was received from the application whose name is in the row in jnxWxAppTable.
                     jnxWxAppStatsBytesInPercent 1.3.6.1.4.1.8239.2.2.1.2.6.2.1.3 gauge32 read-only
The percentage of the bytes in for this application over the total bytes into the WX, since the system was started, that were identified for reduction, and addressed to the WX whose IP address is in the row in jnxWxAsmTable that matches the index jnxWxAsmIndex, and that was received from the application whose name is in the row in jnxWxAppTable that matches the index jnxWxAppIndex. The value returned is (percentage * 1000). Applications should divide the returned value by 1000.
                     jnxWxAppStatsAppName 1.3.6.1.4.1.8239.2.2.1.2.6.2.1.4 tcappname read-only
The name of the application from which the data was received (e.g., FTP, HTTP, Lotus Notes). NOTE: This object is here even though it's also in jnxWxAppTable. This is for the convenience of network monitoring tools that require all columns to be from the same table.
                     jnxWxAppStatsAccelBytesIn 1.3.6.1.4.1.8239.2.2.1.2.6.2.1.5 counter64 read-only
                     jnxWxAppStatsActiveSessionTime 1.3.6.1.4.1.8239.2.2.1.2.6.2.1.6 counter64 read-only
                     jnxWxAppStatsEstBoostBytes 1.3.6.1.4.1.8239.2.2.1.2.6.2.1.7 counter64 read-only
                     jnxWxAppStatsBytesOutWxc 1.3.6.1.4.1.8239.2.2.1.2.6.2.1.8 counter64 read-only
             jnxWxAppAggrStatsTable 1.3.6.1.4.1.8239.2.2.1.2.6.3 no-access
Aggregate statistics maintained by a Compressor for each application that is monitored. These statistics apply to the compressor as a whole and are summed over all decompressor sessions maintained by the compressor.
                 jnxWxAppAggrStatsEntry 1.3.6.1.4.1.8239.2.2.1.2.6.3.1 no-access
A row in jnxWxAppAggrStatsTable.
                     jnxWxAppAggrStatsBytesInRe 1.3.6.1.4.1.8239.2.2.1.2.6.3.1.1 counter64 read-only
Total number of bytes that entered the WX Compression Engine for this application since the system was started.
                     jnxWxAppAggrStatsBytesOutRe 1.3.6.1.4.1.8239.2.2.1.2.6.3.1.2 counter64 read-only
Total number of bytes that exited the WX Compression Engine after reduction for this application since the system was started.
                     jnxWxAppAggrStatsBytesInPercent 1.3.6.1.4.1.8239.2.2.1.2.6.3.1.3 gauge32 read-only
The percentage of the bytes in for this application over the total bytes into the WX Compression Engine. The value returned is (percentage * 1000). Applications should divide the returned value by 1000.
             jnxWxWanStatsTable 1.3.6.1.4.1.8239.2.2.1.2.6.4 no-access
Per application WAN performance statistics
                 jnxWxWanStatsEntry 1.3.6.1.4.1.8239.2.2.1.2.6.4.1 no-access
A row in jnxWxWanStatsTable. Note that the indices are from jnxWxAsmTable and jnxWxAppTable. For each Decompressor this compressor has a session with (indexed by jnxWxAsmIndex), statistics are maintained for each application that is monitored (indexed by jnxWxAppIndex).
                     jnxWxWanStatsBytesToWan 1.3.6.1.4.1.8239.2.2.1.2.6.4.1.1 counter64 read-only
Total number of bytes sent to the wan on a per application basis
                     jnxWxWanStatsBytesFromWan 1.3.6.1.4.1.8239.2.2.1.2.6.4.1.2 counter64 read-only
Total number of bytes received from the WAN on a per application basis
             jnxWxAccelAppNameTable 1.3.6.1.4.1.8239.2.2.1.2.6.5 no-access
List of applications that can be accelerated by the WX device.
                 jnxWxAccelAppNameEntry 1.3.6.1.4.1.8239.2.2.1.2.6.5.1 no-access
A row in jnxWxAccelAppNameTable. Each row contains the name of an application that can be accelerated.
                     jnxWxAccelAppIndex 1.3.6.1.4.1.8239.2.2.1.2.6.5.1.1 integer32 no-access
This row's number, with range (1..jnxWxStatsAccelAppCount).
                     jnxWxAccelAppName 1.3.6.1.4.1.8239.2.2.1.2.6.5.1.2 tcappname read-only
The name of the application from which the data was received (e.g., FTP, HTTP, Lotus Notes).
             jnxWxAccelAppStatsTable 1.3.6.1.4.1.8239.2.2.1.2.6.6 no-access
Accelerated application performance statistics. Includes time with and without acceleration in seconds
                 jnxWxAccelAppStatsEntry 1.3.6.1.4.1.8239.2.2.1.2.6.6.1 no-access
A row in jnxWxAccelAppStatsTable. Indices are from jnxWxAsmTable and jnxWxAccelAppNameTable. For each Decompressor this compressor has a session with (indexed by jnxWxAsmIndex), statistics are maintained for each application that is accelereated (indexed by jnxWxAccelAppIndex)
                     jnxWxAccelAppTimeWithAccel 1.3.6.1.4.1.8239.2.2.1.2.6.6.1.3 unsigned32 read-only
Total number of seconds required to complete all transactions with acceleration enabled.
                     jnxWxAccelAppTimeWithoutAccel 1.3.6.1.4.1.8239.2.2.1.2.6.6.1.4 unsigned32 read-only
Total number of seconds that would be required to complete all transactions if acceleration was disabled.
         jnxWxBurstStats 1.3.6.1.4.1.8239.2.2.1.2.7
Sub-tree for WAN Acceleration system statistics.
             jnxWxBurstStatsStartTime 1.3.6.1.4.1.8239.2.2.1.2.7.1 integer32 read-only
The start of the minute in seconds since midnight (00:00:00), January 1, 1970, UTC over which the burst stats apply.
             jnxWxBurstStatsBpsIn 1.3.6.1.4.1.8239.2.2.1.2.7.2 gauge32 read-only
Burst bits per second into reduction engine for the past minute.
             jnxWxBurstStatsBpsOut 1.3.6.1.4.1.8239.2.2.1.2.7.3 gauge32 read-only
Burst bits per second out of reduction engine for the past minute.
             jnxWxBurstStatsBpsPt 1.3.6.1.4.1.8239.2.2.1.2.7.4 gauge32 read-only
Burst pass-through bits per second for the past minute.
         jnxWxStatsAccelAppCount 1.3.6.1.4.1.8239.2.2.1.2.8 integer32 read-only
The number of applications currently being accelerated on this Compressor.
         jnxWxStatsVirtEndptCount 1.3.6.1.4.1.8239.2.2.1.2.9 integer32 read-only
The number of virtual endpoints configured on this WX
         jnxWxQos 1.3.6.1.4.1.8239.2.2.1.2.10
Information maintained by a Compressor for each QoS class that is monitored.
               jnxWxQosEndptTable 1.3.6.1.4.1.8239.2.2.1.2.10.1 no-access
List of endpoints managed by QoS.
                   jnxWxQosEndptEntry 1.3.6.1.4.1.8239.2.2.1.2.10.1.1 no-access
A row in jnxWxQosEndptTable.
                       jnxWxQosEndptIndex 1.3.6.1.4.1.8239.2.2.1.2.10.1.1.1 integer32 no-access
This row's number, with range (1..jnxWxStatsQosEndptCount).
                       jnxWxQosEndptIdentifier 1.3.6.1.4.1.8239.2.2.1.2.10.1.1.2 tcqosidentifier read-only
The IP address of an Decompressor or the name of a virtual endpoint.
               jnxWxQosClassTable 1.3.6.1.4.1.8239.2.2.1.2.10.2 no-access
List of QoS classes currently monitored.
                   jnxWxQosClassEntry 1.3.6.1.4.1.8239.2.2.1.2.10.2.1 no-access
A row in the jnxWxQosClassTable
                       jnxWxQosClassIndex 1.3.6.1.4.1.8239.2.2.1.2.10.2.1.1 integer32 no-access
This row's number, with range (1..jnxWxStatsQosClassCount).
                       jnxWxQosClassName 1.3.6.1.4.1.8239.2.2.1.2.10.2.1.2 tcqosidentifier read-only
The name of the QoS class
               jnxWxQosStatsTable 1.3.6.1.4.1.8239.2.2.1.2.10.3 no-access
Per class QoS performance statistics
                   jnxWxQosStatsEntry 1.3.6.1.4.1.8239.2.2.1.2.10.3.1 no-access
A row in the jnxWxQosStatsTable. Indexed by decompressor and the corresponding QoS class. Statistics are maintained per endpoint (indexed by jnxWxQosEndptIndex) and per QoS class associated with the endpoint (indexed by jnxWxQosClassIndex)
                       jnxWxQosStatsBytesIn 1.3.6.1.4.1.8239.2.2.1.2.10.3.1.3 counter64 read-only
Total number of bytes received from the WAN on a per class basis
                       jnxWxQosStatsBytesOut 1.3.6.1.4.1.8239.2.2.1.2.10.3.1.4 counter64 read-only
Total number of bytes sent to the WAN on a per class basis
                       jnxWxQosStatsBytesDropped 1.3.6.1.4.1.8239.2.2.1.2.10.3.1.5 counter64 read-only
Total number of bytes dropped on a per class basis
                       jnxWxQosStatsPktsIn 1.3.6.1.4.1.8239.2.2.1.2.10.3.1.6 counter64 read-only
Total number of packets received from the WAN on a per class basis
                       jnxWxQosStatsPktsOut 1.3.6.1.4.1.8239.2.2.1.2.10.3.1.7 counter64 read-only
Total number of packets sent to the wan on a per class basis
                       jnxWxQosStatsPktsDropped 1.3.6.1.4.1.8239.2.2.1.2.10.3.1.8 counter64 read-only
Total number of packets dropped on a per class basis
         jnxWxStatsQosClassCount 1.3.6.1.4.1.8239.2.2.1.2.11 integer32 read-only
The number of QoS classes currently being monitored on this Compressor.
         jnxWxStatsQosEndptCount 1.3.6.1.4.1.8239.2.2.1.2.12 integer32 read-only
The number of QoS endpoints currently being monitored on this Compressor.
         jnxWxStatsWpEndptCount 1.3.6.1.4.1.8239.2.2.1.2.13 integer32 read-only
Number of endpoints with WAN performance monitoring enabled
         jnxWxWanPerf 1.3.6.1.4.1.8239.2.2.1.2.14
               jnxWxWpEndptTable 1.3.6.1.4.1.8239.2.2.1.2.14.1 no-access
List of endpoints managed by Multi-path
                   jnxWxWpEndptEntry 1.3.6.1.4.1.8239.2.2.1.2.14.1.1 no-access
                       jnxWxWpEndptIndex 1.3.6.1.4.1.8239.2.2.1.2.14.1.1.1 integer32 no-access
                       jnxWxWpEndptIp 1.3.6.1.4.1.8239.2.2.1.2.14.1.1.2 ipaddress read-only
               jnxWxWpStatsTable 1.3.6.1.4.1.8239.2.2.1.2.14.2 no-access
                   jnxWxWpStatsEntry 1.3.6.1.4.1.8239.2.2.1.2.14.2.1 no-access
                       jnxWxWpStatsLatencyThresh 1.3.6.1.4.1.8239.2.2.1.2.14.2.1.3 unsigned32 read-only
                       jnxWxWpStatsAvgLatency 1.3.6.1.4.1.8239.2.2.1.2.14.2.1.4 unsigned32 read-only
                       jnxWxWpStatsLatencyCount 1.3.6.1.4.1.8239.2.2.1.2.14.2.1.5 unsigned32 read-only
                       jnxWxWpStatsLatencyAboveThresh 1.3.6.1.4.1.8239.2.2.1.2.14.2.1.6 unsigned32 read-only
                       jnxWxWpStatsLatencyAboveThreshCount 1.3.6.1.4.1.8239.2.2.1.2.14.2.1.7 unsigned32 read-only
                       jnxWxWpStatsLossPercent 1.3.6.1.4.1.8239.2.2.1.2.14.2.1.8 unsigned32 read-only
                       jnxWxWpStatsLossCount 1.3.6.1.4.1.8239.2.2.1.2.14.2.1.9 unsigned32 read-only
                       jnxWxWpStatsEventCount 1.3.6.1.4.1.8239.2.2.1.2.14.2.1.10 unsigned32 read-only
                       jnxWxWpStatsDiversionCount 1.3.6.1.4.1.8239.2.2.1.2.14.2.1.11 unsigned32 read-only
                       jnxWxWpStatsReturnCount 1.3.6.1.4.1.8239.2.2.1.2.14.2.1.12 unsigned32 read-only
                       jnxWxWpStatsLastDown 1.3.6.1.4.1.8239.2.2.1.2.14.2.1.13 unsigned32 read-only
                       jnxWxWpStatsUnavailableCount 1.3.6.1.4.1.8239.2.2.1.2.14.2.1.14 unsigned32 read-only
                       jnxWxWpStatsMinuteCount 1.3.6.1.4.1.8239.2.2.1.2.14.2.1.15 unsigned32 read-only
     jnxWxEvents 1.3.6.1.4.1.8239.2.2.1.3
Sub-tree for WAN Acceleration MIB events.
         jnxWxEventObjs 1.3.6.1.4.1.8239.2.2.1.3.1
Branch for objects meant only to be sent in event varbinds.
         jnxWxEventEvents 1.3.6.1.4.1.8239.2.2.1.3.2
Branch for the events themselves.
             jnxWxEventEventsV2 1.3.6.1.4.1.8239.2.2.1.3.2.0
Branch for SNMPv2 events. The OIDs for SNMPv2 events should have a zero as the next-to-last sub-identifier (as specified in RFC1902).
                 jnxWxEventRipAuthFailure 1.3.6.1.4.1.8239.2.2.1.3.2.0.1
RIP authentication failure
                 jnxWxEventCompressionBufferOverflow 1.3.6.1.4.1.8239.2.2.1.3.2.0.2
The compressor's input buffer is approaching full capacity. This trap is currently unused.
                 jnxWxEventCompressionSessionClosed 1.3.6.1.4.1.8239.2.2.1.3.2.0.3
The compressor's session to the device described in jnxWxCommonEventDescr was terminated.
                 jnxWxEventDecompressionSessionClosed 1.3.6.1.4.1.8239.2.2.1.3.2.0.4
The decompressor's session to the device described in jnxWxCommonEventDescr was terminated.
                 jnxWxEventCompressionSessionOpened 1.3.6.1.4.1.8239.2.2.1.3.2.0.5
The compressor's session to the device described in jnxWxCommonEventDescr was opened.
                 jnxWxEventDecompressionSessionOpened 1.3.6.1.4.1.8239.2.2.1.3.2.0.6
The decompressor's session to the device described in jnxWxCommonEventDescr was opened.
                 jnxWxEventPrimaryRegServerUnreachable 1.3.6.1.4.1.8239.2.2.1.3.2.0.7
The primary registration server is currently unreachable.
                 jnxWxEventSecondaryRegServerUnreachable 1.3.6.1.4.1.8239.2.2.1.3.2.0.8
The secondary registration server is currently unreachable.
                 jnxWxEventMultiNodeMasterUp 1.3.6.1.4.1.8239.2.2.1.3.2.0.9
The system designated as the 'master' of a multi-node came up. This notification is generated by the system that's designated as the 'master' of the multi-node. Note that the corresponding Down notification is generated by the designated 'master-backup' of the same multi-node. This trap is currently unused.
                 jnxWxEventMultiNodeMasterDown 1.3.6.1.4.1.8239.2.2.1.3.2.0.10
The system designated as the 'master' of a multi-node is currently down. This notification is generated by the system that's designated as the 'master-backup' of the same multi-node. Note that the corresponding Up notification is generated by the designated 'master' of the same multi-node. This trap is currently unused.
                 jnxWxEventMultiNodeLastUp 1.3.6.1.4.1.8239.2.2.1.3.2.0.11
The system designated as the 'last-node' of a multi-node came up. This notification is generated by the system that's designated as the 'last-node' of the multi-node. Note that the corresponding Down notification is generated by the designated 'master' of the same multi-node. This trap is currently unused.
                 jnxWxEventMultiNodeLastDown 1.3.6.1.4.1.8239.2.2.1.3.2.0.12
The system designated as the 'last-node' of a multi-node is currently down. This notification is generated by the system that's designated as the 'master' of the same multi-node. Note that the corresponding Up notification is generated by the designated 'last-node' of the same multi-node. This trap is currently unused.
                 jnxWxEventPrimaryDownBackupEngaged 1.3.6.1.4.1.8239.2.2.1.3.2.0.13
The system designated as the 'primary' is currently unreachable. This notification is generated by the system that's designated as the 'backup' device. The backup device is engaged for the primary device.
                 jnxWxEventPrimaryDownBackupEngageFailed 1.3.6.1.4.1.8239.2.2.1.3.2.0.14
The system designated as the 'primary' is currently unreachable. This notification is generated by the system that's designated as the 'backup' device. The backup device failed to engage for the primary device.
                 jnxWxEventPrimaryUpBackupDisengaged 1.3.6.1.4.1.8239.2.2.1.3.2.0.15
The system designated as the 'primary' is currently reachable. This notification is generated by the system that's designated as the 'backup' device. The backup device has disengaged itself.
                 jnxWxEventMultiPathStatusChange 1.3.6.1.4.1.8239.2.2.1.3.2.0.16
The status of the primary or secondary path to another multi-path enabled system changed. The path became inactive or failed after previously being active or vice versa. This might have caused traffic designated to flow over this path to be switched from or to this path.
                 jnxWxEventDiskFailure 1.3.6.1.4.1.8239.2.2.1.3.2.0.17
A hard disk failed on the system. The system was rebooted, and will now operate without the downed disk, at a degraded performance. Dictionary accumulated until this point was lost.
                 jnxWxEventWanPerfStatusChange 1.3.6.1.4.1.8239.2.2.1.3.2.0.18
The status of the Path on which WAN Performance Monitoring is enabled has changed. The performance of the path has changed either from acceptable to unacceptable or vice versa.
                 jnxWxEventDCQAboveHiWatermark 1.3.6.1.4.1.8239.2.2.1.3.2.0.19
The decompression queue has reached the high watermark.
                 jnxWxEventDCQBelowHiWatermark 1.3.6.1.4.1.8239.2.2.1.3.2.0.20
The decompression queue has fallen below the high watermark.
                 jnxWxEventPerformanceThreshCrossed 1.3.6.1.4.1.8239.2.2.1.3.2.0.21
The threshold for a configured perfromance event has been crossed. This notification indicates that some system parameter being measured has reached a critical value.
                 jnxWxEventClientLinkDown 1.3.6.1.4.1.8239.2.2.1.3.2.0.22
Link to the Client went down.
                 jnxWxEventClientLinkUp 1.3.6.1.4.1.8239.2.2.1.3.2.0.23
Link to the client came up.