ITOUCH-INTERNET-MIB: View SNMP OID List / Download MIB

VENDOR: MRV COMMUNICATIONS


 Home MIB: ITOUCH-INTERNET-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 xInternetDep 1.3.6.1.4.1.33.4
 xInternet 1.3.6.1.4.1.33.10
       xIp 1.3.6.1.4.1.33.10.1
           ipGatewayAddress1 1.3.6.1.4.1.33.10.1.1 ipaddress read-write
The internet address of the system's primary (first choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET PRIMARY GATEWAY ADDRESS and the value labeled 'Primary Gateway Address:' in the SERVER INTERNET CHARACTERISTICS display.
           ipGatewayAddress2 1.3.6.1.4.1.33.10.1.2 ipaddress read-write
The internet address of the system's secondary (second choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET SECONDARY GATEWAY ADDRESS and the value labeled 'Secondary Gateway Address:' in the SERVER INTERNET CHARACTERISTICS display.
           ipAutoSubnetMask 1.3.6.1.4.1.33.10.1.3 integer read-write
A control for automatic determination of subnet mask. 'disabled' indicates the system must use the mask as configured by the network manager. 'enabled' indicates that the system is to automatically change the subnet mask when the system's Internet address is changed. Corresponds directly to SERVER INTERNET SUBNET MASK AUTOCONFIGURE and the value labeled 'Subnet Mask Autoconfigure:' in the SERVER INTERNET CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
           ipReassembly 1.3.6.1.4.1.33.10.1.4 integer read-write
A control for reassembly of IP fragments. Corresponds directly to SERVER INTERNET REASSEMBLY and the value labeled 'Reassembly:' in the SERVER INTERNET CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
           ipFragmentsQueuedHigh 1.3.6.1.4.1.33.10.1.5 gauge read-only
Highest number of IP fragments queued.
           ipFragmentsQueuedCurrent 1.3.6.1.4.1.33.10.1.6 gauge read-only
Current number of IP fragments queued.
           ipGenAdExtTable 1.3.6.1.4.1.33.10.1.7 no-access
Table of additional fields indexed by local IP address. An entry in this table is created or deleted when an entry in the MIB-II ipAddrTable is created or deleted. Although MIB-II specifies the ipAddrTable as read-only, iTouch implementations typically implement it as read-write to support modification of local IP addresses, network masks, and such.
               ipGenAdExtEntry 1.3.6.1.4.1.33.10.1.7.1 no-access
A particular entry.
                   ipGenAdEntExtType 1.3.6.1.4.1.33.10.1.7.1.1 integer read-write
The way this local IP address is used, which may imply alternate, more intuitive ways to set it. primary general purpose for ordinary use rotary identificaton for rotary selection slip use for SLIP connection ppp use for PPP connection Enumeration: 'ppp': 4, 'primary': 1, 'slip': 3, 'rotary': 2.
                   ipGenAdEntExtBroadcast 1.3.6.1.4.1.33.10.1.7.1.2 ipaddress read-write
Outgoing IP broadcast address associated with this local address. Value may be confined to logical compatibility with associated network mask.
           ipARPTimeout 1.3.6.1.4.1.33.10.1.8 integer read-write
A control to set the length of time in minutes before an unused ARP entry is purged from the ARP table. The default is 60 minutes. Corresponds directly to the value labeled 'Translation Table TTL' in the SERVER INTERNET CHARACTERISTICS display.
           ipGatewayPingInterval 1.3.6.1.4.1.33.10.1.9 integer read-write
A control to set the interval of time in seconds between successive pings to the primary gateway so as to determine its status. The default is 60 seconds. Corresponds directly to the value labeled 'Gateway Timeout' in the SERVER INTERNET CHARACTERISTICS display.
           ipConfigureBootp 1.3.6.1.4.1.33.10.1.11 integer read-write
Control to use the BOOTP protocol upon startup to learn the unit's own internet address, subnet mask, primary and secondary gateway servers, domain name servers, time server and domain name. Enumeration: 'disabled': 1, 'enabled': 2.
       xTcp 1.3.6.1.4.1.33.10.2
           tcpPortTable 1.3.6.1.4.1.33.10.2.1 no-access
A list of TCP character port entries.
               tcpPortEntry 1.3.6.1.4.1.33.10.2.1.1 no-access
TCP parameter values for a character port.
                   tcpPortIndex 1.3.6.1.4.1.33.10.2.1.1.1 integer read-only
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                   tcpPortConnectByAddress 1.3.6.1.4.1.33.10.2.1.1.2 integer read-write
A control for requesting outgoing connection by internet address. 'disabled' indicates outgoing connections must be by Domain name. 'enabled' indicates that outgoing connections may be requested by internet address. Corresponds directly to PORT INTERNET CONNECTIONS and the presence of the label 'Internet Connections' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
                   tcpPortWindowSize 1.3.6.1.4.1.33.10.2.1.1.3 integer read-write
Size of the TCP window for TCP connections on the port. Corresponds directly to PORT INTERNET TCP WINDOW SIZE and the value labeled 'TCP Window Size:' in the PORT ALTERNATE CHARACTERISTICS display.
                   tcpPortKeepAliveLimit 1.3.6.1.4.1.33.10.2.1.1.4 integer read-write
Number of minutes to maintain a TCP connection without response to keep-alive communication. A value of zero indicates no limit.
           tcpResequencing 1.3.6.1.4.1.33.10.2.2 integer read-write
A control for keeping TCP messages received out-of-order to resequence them before using them. Corresponds directly to SERVER INTERNET TCP RESEQUENCING and the value labeled 'Resequencing:' in the SERVER INTERNET CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
           tcpQueuedSegs 1.3.6.1.4.1.33.10.2.3 gauge read-only
Number of TCP segments in the TCP receive queues. Corresponds directly to the value labeled 'TCP Packets Queued:' in the SERVER INTERNET COUNTERS display.
           tcpDiscardSegs 1.3.6.1.4.1.33.10.2.4 counter read-only
Number of TCP segments discarded due to exceeding the TCP receive queue limit. Corresponds directly to the value labeled 'TCP Packets Discarded:' in the SERVER INTERNET COUNTERS display.
           tcpConnectTimer 1.3.6.1.4.1.33.10.2.5 integer read-write
Number of seconds to attempt a TCP connection without a response from the other side. The default value is 32 seconds. Corresponds directly to the SERVER INTERNET TCP CONNECT TIMER and the value labeled 'TCP Connect Timer' in the SERVER INTERNET CHARACTERISTICS display
           tcpLocalPortBase 1.3.6.1.4.1.33.10.2.6 integer read-write
The value for port 0's tcp source port number.
           tcpLocalPortIncrement 1.3.6.1.4.1.33.10.2.7 integer read-write
The value by which the tcp source port number increases for each port greater than port 0.
           tcpRoutingTblSz 1.3.6.1.4.1.33.10.2.8 integer read-write
A control to set the size of the working routing table. The default is the current size of the table (64).
           tcpDataSendDelay 1.3.6.1.4.1.33.10.2.9 integer read-write
A control to delay for the specified number of 10 millisecond ticks before sending the userdata string over the telnet connection.
           tcpAckDelay 1.3.6.1.4.1.33.10.2.10 integer read-write
A Control to prevent sending a TCP ACK when we we change TCP window size. Enumeration: 'disabled': 1, 'enabled': 2.
           tcpRetransmitMin 1.3.6.1.4.1.33.10.2.11 integer read-write
Number of milliseconds for the initial TCP Retransmit timer. This is the time at which a TCP session will initially retransmit unacknowledged packets.
       xSnmpAgent 1.3.6.1.4.1.33.10.3
           snmpAgentGetCommunity 1.3.6.1.4.1.33.10.3.1 displaystring read-write
The SNMP community name allowed to perform get-requests or get-next requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent does not check the community name for these operations. Corresponds directly to SERVER INTERNET SNMP GET COMMUNITY and the value labeled 'Get Community:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
           snmpAgentSetCommunity 1.3.6.1.4.1.33.10.3.2 displaystring read-write
The SNMP community name allowed to perform set-requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent does not check the community name for these operations. Corresponds directly to SERVER INTERNET SNMP SET COMMUNITY and the value labeled 'Set Community:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
           snmpAgentTrapCommunity 1.3.6.1.4.1.33.10.3.3 displaystring read-write
The SNMP community name sent in traps from this agent. Use of this value preserves case. Corresponds directly to SERVER INTERNET SNMP TRAP COMMUNITY and the value labeled 'Trap Community:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
           snmpAgentGetClientNumber 1.3.6.1.4.1.33.10.3.4 integer read-only
The number of client source addresses allowed to perform get-requests or get-next requests to this agent. If the value is 0, the agent does not check source address for these operations. Corresponds indirectly to the values labeled 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
           snmpAgentSetClientNumber 1.3.6.1.4.1.33.10.3.5 integer read-only
The number of client source addresses allowed to perform set-requests to this agent. If the value is 0, the agent does not check source address for these operations. Corresponds indirectly to the values labeled 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
           snmpAgentTrapClientNumber 1.3.6.1.4.1.33.10.3.6 integer read-only
The number of client source addresses to which this agent sends traps. If the value is 0, the agent does not perform this operation. Corresponds indirectly to the values labeled 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
           getClientTable 1.3.6.1.4.1.33.10.3.7 no-access
A list of get client entries. The number of entries is given by the value of snmpAgentGetClientNumber.
               getClientEntry 1.3.6.1.4.1.33.10.3.7.1 no-access
Parameter values for a get client.
                   getClientIndex 1.3.6.1.4.1.33.10.3.7.1.1 integer read-only
Identification of a get client entry. Corresponds directly to the number in the label 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
                   getClientEntryStatus 1.3.6.1.4.1.33.10.3.7.1.2 integer read-write
Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Enumeration: 'valid': 2, 'invalid': 1.
                   getClientAddressType 1.3.6.1.4.1.33.10.3.7.1.3 addresstype read-write
The type of network address contained in getClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. If getClientAddressType does not accompany getClientAddress in a set request, the default type is 'ip'. Corresponds indirectly to the address value labeled 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
                   getClientAddress 1.3.6.1.4.1.33.10.3.7.1.4 octet string read-write
The client's network address. If getClientAddressType does not accompany getClientAddress in a set request, the default type is 'ip'. Corresponds directly to the address value labeled 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
           setClientTable 1.3.6.1.4.1.33.10.3.8 no-access
A list of set client entries. The number of entries is given by the value of snmpAgentSetClientNumber.
               setClientEntry 1.3.6.1.4.1.33.10.3.8.1 no-access
Parameter values for a set client.
                   setClientIndex 1.3.6.1.4.1.33.10.3.8.1.1 integer read-only
Identification of a set client entry. Corresponds directly to the number in the label 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
                   setClientEntryStatus 1.3.6.1.4.1.33.10.3.8.1.2 integer read-write
Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Enumeration: 'valid': 2, 'invalid': 1.
                   setClientAddressType 1.3.6.1.4.1.33.10.3.8.1.3 addresstype read-write
The type of network address contained in setClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. If setClientAddressType does not accompany setClientAddress in a set request, the default type is 'ip'. Corresponds indirectly to the address value labeled 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
                   setClientAddress 1.3.6.1.4.1.33.10.3.8.1.4 octet string read-write
The client's network address. When setting this value, the requester must supply setClientAddressType. If setClientAddressType does not accompany setClientAddress in a set request, the default type is 'ip'. Corresponds directly to the address value labeled 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
           trapClientTable 1.3.6.1.4.1.33.10.3.9 no-access
A list of trap client entries. The number of entries is given by the value of snmpAgentTrapClientNumber.
               trapClientEntry 1.3.6.1.4.1.33.10.3.9.1 no-access
Parameter values for a trap client.
                   trapClientIndex 1.3.6.1.4.1.33.10.3.9.1.1 integer read-only
Identification of a trap client entry. Corresponds directly to the number in the label 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
                   trapClientEntryStatus 1.3.6.1.4.1.33.10.3.9.1.2 integer read-write
Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Enumeration: 'valid': 2, 'invalid': 1.
                   trapClientAddressType 1.3.6.1.4.1.33.10.3.9.1.3 addresstype read-write
The type of network address contained in trapClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an Internet IP address. 'ethernet' is an 802.3 MAC address. If trapClientAddressType does not accompany trapClientAddress in a set request, the default type is 'ip'. Corresponds indirectly to the address value labeled 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
                   trapClientAddress 1.3.6.1.4.1.33.10.3.9.1.4 octet string read-write
The client's network address. When setting this value, the requester must supply trapClientAddressType. If trapClientAddressType does not accompany trapClientAddress in a set request, the default type is 'ip'. Corresponds directly to the address value labeled 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display.
           snmpAgentAuthFailureAddress 1.3.6.1.4.1.33.10.3.10 typedaddress read-only
The address of the client to most recently fail SNMP authorization.
           snmpAgentCommunityAuthenticationAlways 1.3.6.1.4.1.33.10.3.14 integer read-write
When enabled, indicates that community string authentication is done always for Gets, Sets, and GetNexts. When disabled, community string authentication is done once; but bypassed on subsequent Gets, Sets or GetNexts from the same address. Enumeration: 'disabled': 1, 'enabled': 2.
       xDomainResolver 1.3.6.1.4.1.33.10.4
           domainResolverSuffix 1.3.6.1.4.1.33.10.4.1 displaystring read-write
A partial domain name for the server to append to the end of an incomplete domain name provided by the user. Corresponds directly to SERVER INTERNET DEFAULT DOMAIN SUFFIX and the value labeled 'Domain Suffix:' in the SERVER INTERNET CHARACTERISTICS display.
           domainResolverAddress1 1.3.6.1.4.1.33.10.4.2 ipaddress read-write
The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET PRIMARY DOMAIN ADDRESS and the value labeled 'Primary Domain Address:' in the SERVER INTERNET CHARACTERISTICS display.
           domainResolverAddress2 1.3.6.1.4.1.33.10.4.3 ipaddress read-write
The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET SECONDARY DOMAIN ADDRESS and the value labeled 'Secondary Domain Address:' in the SERVER INTERNET CHARACTERISTICS display.
           domainResolverTtl 1.3.6.1.4.1.33.10.4.4 integer read-write
The number of hours to keep received Domain information. Corresponds directly to SERVER INTERNET DOMAIN TTL and the value labeled ' Domain TTL:' in the SERVER INTERNET CHARACTERISTICS display.
           domainResolverNameNumber 1.3.6.1.4.1.33.10.4.5 integer read-only
The number of Domain name mappings in this system's name cache.
           nameTable 1.3.6.1.4.1.33.10.4.6 no-access
A list of Domain name entries. The number of entries is given by the value of domainResolverNameNumber.
               nameEntry 1.3.6.1.4.1.33.10.4.6.1 no-access
Parameter values for a Domain name.
                   nameName 1.3.6.1.4.1.33.10.4.6.1.1 displaystring read-only
A fully qualified domain name. Corresponds directly to the value labeled 'Domain Name' in the DOMAIN display.
                   nameAddress 1.3.6.1.4.1.33.10.4.6.1.2 ipaddress read-only
An Internet address corresponding to the Domain name. Corresponds directly to the value labeled 'Internet Address' in the DOMAIN display.
                   nameStatus 1.3.6.1.4.1.33.10.4.6.1.3 integer read-write
The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE DOMAIN command. Actual removal of the entry is implementation specific. Enumeration: 'valid': 2, 'invalid': 1.
                   nameSource 1.3.6.1.4.1.33.10.4.6.1.4 integer read-only
Source of this entry. The value meanings are: local defined by manager (LOCAL) primary obtained from a primary name server secondary obtained from a secondary name server rwho obtained from rwho Corresponds directly to the value labeled 'Source' in the DOMAIN display. Enumeration: 'rwho': 4, 'manager': 1, 'primary': 2, 'secondary': 3.
                   nameTtl 1.3.6.1.4.1.33.10.4.6.1.5 integer read-only
The number of minutes remaining in the entry's time to live. Corresponds directly to the value labeled 'TTL' in the DOMAIN display.
           domainResolverPpp 1.3.6.1.4.1.33.10.4.7
               domainResolverPppPrimaryServer 1.3.6.1.4.1.33.10.4.7.1 ipaddress read-write
The internet address of the primary Domain Name Server to use in PPP IPCP negotiations. A value of 0.0.0.0 indicates no address. Corresponds directly to the value labeled 'Primary WINS Address:' in the SERVER INTERNET CHARACTERISTICS display.
               domainResolverPppSecondaryServer 1.3.6.1.4.1.33.10.4.7.2 ipaddress read-write
The internet address of the secondary Domain Name Server to use in PPP IPCP negotiations. A value of 0.0.0.0 indicates no address. Corresponds directly to the value labeled 'Secondary WINS Address:' in the SERVER INTERNET CHARACTERISTICS display.
       xSlip 1.3.6.1.4.1.33.10.5
           slipTable 1.3.6.1.4.1.33.10.5.1 no-access
A list of SLIP character port entries.
               slipEntry 1.3.6.1.4.1.33.10.5.1.1 no-access
Parameter values for a SLIP port.
                   slipIndex 1.3.6.1.4.1.33.10.5.1.1.1 integer read-only
An index value that uniquely identifies a port that can run SLIP. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                   slipState 1.3.6.1.4.1.33.10.5.1.1.2 integer read-write
A control indicating whether SLIP is in operation on the port. Corresponds directly to PORT INTERNET SLIP and the value labeled 'SLIP' in the PORT CHARACTERISTICS display. Enumeration: 'on': 2, 'off': 1, 'compressed': 3.
                   slipLocalAddress 1.3.6.1.4.1.33.10.5.1.1.3 ipaddress read-write
The IP address assigned to the port. Corresponds directly to PORT SLIP ADDRESS and the value labeled 'SLIP Address:' in the PORT ALTERNATE CHARACTERISTICS display.
                   slipRemoteAddress 1.3.6.1.4.1.33.10.5.1.1.4 ipaddress read-write
The IP address of the remote system attached to the port. Corresponds directly to PORT SLIP REMOTE and the value labeled 'Remote SLIP Address:' in the PORT ALTERNATE CHARACTERISTICS display.
                   slipMask 1.3.6.1.4.1.33.10.5.1.1.5 ipaddress read-write
The subnet mask to use for SLIP operation on the port. Corresponds directly to PORT SLIP MASK and the value labeled 'SLIP Mask:' in the PORT ALTERNATE CHARACTERISTICS display.
                   slipPortPacketsReceived 1.3.6.1.4.1.33.10.5.1.1.6 counter read-only
The number of SLIP packets received from the port. Corresponds directly to the value labeled 'Serial Packets Received:' in the PORT COUNTERS display.
                   slipPortPacketsSent 1.3.6.1.4.1.33.10.5.1.1.7 counter read-only
The number of SLIP packets sent to the port. Corresponds directly to the value labeled 'Serial Packets Sent:' in the PORT COUNTERS display.
                   slipPortPacketsDiscarded 1.3.6.1.4.1.33.10.5.1.1.8 counter read-only
The number of SLIP packets received from the port and discarded. Corresponds directly to the value labeled 'Serial Packets Discarded:' in the PORT COUNTERS display.
                   slipPortPacketLengthErrors 1.3.6.1.4.1.33.10.5.1.1.9 counter read-only
The number of SLIP packets received from the port with an incorrect number of bytes. Corresponds directly to the value labeled 'Serial Packet Length Errors:' in the PORT COUNTERS display.
                   slipPortPacketChecksumErrors 1.3.6.1.4.1.33.10.5.1.1.10 counter read-only
The number of SLIP packets received from the port with an invalid checksum. Corresponds directly to the value labeled 'Serial Packet Checksum Errors:' in the PORT COUNTERS display.
                   slipNetworkPacketsReceived 1.3.6.1.4.1.33.10.5.1.1.11 counter read-only
The number of SLIP packets received from the network for this port. Corresponds directly to the value labeled 'Network Packets Received:' in the PORT COUNTERS display.
                   slipNetworkPacketsSent 1.3.6.1.4.1.33.10.5.1.1.12 counter read-only
The number of SLIP packets sent to the network from this port. Corresponds directly to the value labeled 'Network Packets Sent:' in the PORT COUNTERS display.
                   slipNetworkPacketsDiscarded 1.3.6.1.4.1.33.10.5.1.1.13 counter read-only
The number of SLIP packets received from the network for this port and discarded. Corresponds directly to the value labeled 'Network Packets Discarded:' in the PORT COUNTERS display.
       xTelnet 1.3.6.1.4.1.33.10.6
           telnetPortTable 1.3.6.1.4.1.33.10.6.1 no-access
A list of Telnet character port entries.
               telnetPortEntry 1.3.6.1.4.1.33.10.6.1.1 no-access
Telnet parameter values for a character port.
                   telnetPortIndex 1.3.6.1.4.1.33.10.6.1.1.1 integer read-only
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                   telnetPortIncomingTcpPort 1.3.6.1.4.1.33.10.6.1.1.2 integer read-write
The TCP port number offered for incoming connections to this character port. Corresponds directly to PORT TELNET REMOTE PORT and the value labeled 'Remote Port:' in the PORT TELNET CHARACTERISTICS display.
                   telnetPortOutgoingTcpPort 1.3.6.1.4.1.33.10.6.1.1.3 integer read-write
The TCP port number used by default for outgoing connections from this character port. Corresponds directly to PORT TELNET DEFAULT PORT and the value labeled 'Default Port:' in the PORT TELNET CHARACTERISTICS display.
                   telnetPortNewlineTranslation 1.3.6.1.4.1.33.10.6.1.1.4 integer read-write
Translation to apply to newline sequences (CR/NULL or CR/LF) received from the network, before sending the newline to the character port. The value indicates the sequence sent to the character port, with 'none' meaning no translation. The lfToCrLf value converts the newline character LF received from the network to a CR/LF. Corresponds directly to PORT TELNET NEWLINE FILTERING and the value labeled 'Newline Filtering:' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'std': 5, 'none': 1, 'crLf': 4, 'crNull': 3, 'lfToCrLf': 6, 'cr': 2.
                   telnetPortTerminalType 1.3.6.1.4.1.33.10.6.1.1.5 displaystring read-write
The terminal type character string for Telnet negotiations. Corresponds directly to PORT TELNET TERMINALTYPE and the value labeled 'TerminalType:' in the PORT TELNET CHARACTERISTICS display.
                   telnetPortEorReflection 1.3.6.1.4.1.33.10.6.1.1.6 integer read-write
Control for end-of-record handshake. Corresponds directly to PORT TELNET EOR REFLECTION and the value labeled 'EOR Reflection:' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
                   telnetPortBinaryMode 1.3.6.1.4.1.33.10.6.1.1.7 integer read-write
Control for operation of Telnet binary mode. The value meanings are: disabled refuse binary mode negotiation (INTERACTIVE) flowControl pass all but XON and XOFF (PASTHRU) complete pass all characters (PASSALL) Corresponds directly to PORT TELNET BINARY SESSION MODE and the value labeled 'Binary Session Mode:' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'disabled': 3, 'flowControl': 1, 'complete': 2.
                   telnetPortSendLocation 1.3.6.1.4.1.33.10.6.1.1.8 integer read-write
A control indicating whether a Telnet session will initiate negotiation of the Send Location option. Corresponds directly to the PORT TELNET LOCATION and the value labeled 'Location' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
                   telnetPortClientLocation 1.3.6.1.4.1.33.10.6.1.1.9 displaystring read-only
The location of the Telnet client port. Corresponds directly to the value labeled 'Telnet Client Location' in the SESSION display.
                   telnetPortPassiveSendLocation 1.3.6.1.4.1.33.10.6.1.1.10 integer read-write
A control indicating whether a Telnet session will passively respond to negotiation of the Send Location option. When disabled and telnetPortSendLocation is disabled, we will refuse to negotiate this option. When telnetPortSendLocation is enabled, it takes precedence. Corresponds directly to the value labeled 'Passive Location' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
           telnetSerialPortTable 1.3.6.1.4.1.33.10.6.2 no-access
A list of Telnet character port entries.
               telnetSerialPortEntry 1.3.6.1.4.1.33.10.6.2.1 no-access
Telnet parameter values for a character port.
                   telnetSerialPortIndex 1.3.6.1.4.1.33.10.6.2.1.1 integer read-only
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                   telnetSerialPortOptionDisplay 1.3.6.1.4.1.33.10.6.2.1.2 integer read-write
Control for display of Telnet option negotiations. Corresponds directly to PORT TELNET OPTION DISPLAY and the value labeled 'Option Display:' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
                   telnetSerialPortCsiEscape 1.3.6.1.4.1.33.10.6.2.1.3 integer read-write
Control for translation of 8-bit escape sequences received from the character port to 7-bit equivalents before transmission to the remote partner. Corresponds directly to PORT TELNET CSI ESCAPE and the value labeled 'CSI Escape:' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
                   telnetSerialPortEchoMode 1.3.6.1.4.1.33.10.6.2.1.4 integer read-write
Control for who echoes characters that come from the character port. The value meanings are: local terminal server echoes locally remote remote system echoes disabled don't default to local echo passive don't initiate negotiating of echo character initiate remote echo and suppress go ahead line reject remote echo and reject suppress go ahead noecho will not initiate echo, but will negotiate it Corresponds directly to PORT TELNET ECHO MODE and the value labeled 'Echo Mode:' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'passive': 4, 'remote': 2, 'character': 5, 'disabled': 3, 'noecho': 7, 'line': 6, 'local': 1.
                   telnetSerialPortNewlineMode 1.3.6.1.4.1.33.10.6.2.1.5 integer read-write
Translation to apply to newline (carriage return) received from the character port, before sending the newline to the remote partner. The correspondence to command keywords is 'crNull' to NULL, 'crLF' to LINEFEED, and 'verbatim' to NOTHING (that is, no translation). Corresponds directly to PORT TELNET NEWLINE and the value labeled 'Newline:' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'verbatim': 3, 'crLf': 2, 'crNull': 1.
                   telnetSerialPortTransmitMode 1.3.6.1.4.1.33.10.6.2.1.6 integer read-write
Criterion for deciding to send to the remote partner characters received from the character port. Corresponds directly to PORT TELNET TRANSMIT and the value labeled 'Transmit:' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'timed': 3, 'buffered': 2, 'controlchar': 4, 'immediate': 1.
                   telnetSerialPortTransmitCharacterTimes 1.3.6.1.4.1.33.10.6.2.1.7 integer read-write
Number of character times to wait before transmitting when telnetSerialPortTransmitMode value is 'timed'. Corresponds directly to PORT TELNET TRANSMIT IDLETIME and the value labeled 'Transmit: Idle Time -' in the PORT TELNET CHARACTERISTICS display. This object may only be set to values 1..255. A value of 0 may be read if telnetSerialPortTransmitMode has a value of immediate or buffered
                   telnetSerialPortAbortOutputCharacter 1.3.6.1.4.1.33.10.6.2.1.8 integer read-write
Character input from the character port to cause aborting output. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ABORT OUTPUT and the value labeled 'Abort Output Character:' in the PORT TELNET CHARACTERISTICS display.
                   telnetSerialPortAttentionCharacter 1.3.6.1.4.1.33.10.6.2.1.9 integer read-write
Character input from the character port to cause an attention notification to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ATTENTION and the value labeled 'Attention Character:' in the PORT TELNET CHARACTERISTICS display.
                   telnetSerialPortEraseKeyCharacter 1.3.6.1.4.1.33.10.6.2.1.10 integer read-write
Character input from the character port to cause erasure of the previous input character. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ERASE CHARACTER and the value labeled 'Erase Keystroke Character:' in the PORT TELNET CHARACTERISTICS display.
                   telnetSerialPortEraseLineCharacter 1.3.6.1.4.1.33.10.6.2.1.11 integer read-write
Character input from the character port to cause erasure of the previous line of input. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ERASE LINE and the value labeled 'Erase Line Character:' in the PORT TELNET CHARACTERISTICS display.
                   telnetSerialPortInterruptCharacter 1.3.6.1.4.1.33.10.6.2.1.12 integer read-write
Character input from the character port to cause sending an interrupt notification to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET INTERRUPT and the value labeled 'Interrupt Character:' in the PORT TELNET CHARACTERISTICS display.
                   telnetSerialPortQueryCharacter 1.3.6.1.4.1.33.10.6.2.1.13 integer read-write
Character input from the character port to cause sending a status query to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET QUERY and the value labeled 'Query Character:' in the PORT TELNET CHARACTERISTICS display.
                   telnetSerialPortSynchronizeCharacter 1.3.6.1.4.1.33.10.6.2.1.14 integer read-write
Character input from the character port to cause sending a synchronization attempt to the remote partner. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET SYNCHRONIZE and the value labeled 'Synchronize Character:' in the PORT TELNET CHARACTERISTICS display.
                   telnetSerialPortUrgentBreak 1.3.6.1.4.1.33.10.6.2.1.15 integer read-write
Control for encoding breaks as Telnet urgent data. Corresponds directly to PORT TELNET URGENT BREAK and the value labeled 'Urgent Break:' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
                   telnetSerialPortRs491 1.3.6.1.4.1.33.10.6.2.1.16 integer read-write
A control to enable RS491 protocol processing on a port. Enumeration: 'disabled': 1, 'enabled': 2.
                   telnetSerialPortTransmitBufferedTime 1.3.6.1.4.1.33.10.6.2.1.17 integer read-write
Number of milliseconds to wait before transmitting when telnetSerialPortTransmitMode value is 'timed'. Corresponds directly to PORT TELNET TRANSMIT BUFFERED and the value labeled 'Transmit: Buff Time -' in the PORT TELNET CHARACTERISTICS display. This object may only be set to values 30..1500. A value of 0 may be read if telnetSerialPortTransmitMode has a value of immediate, idletime or controlchar
                   telnetSerialPortInterpretInterruptAsBreak 1.3.6.1.4.1.33.10.6.2.1.18 integer read-write
Control to interpret a Telnet Interrupt Character coming from the network as a Telnet Break Character, and to send a break out the serial port. This control is necessary for those devices which can send Telnet Interrupt but not Telnet Break. Corresponds directly to the presence of 'Telnet Interrupts Interpreted as Break' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'disabled': 2, 'enabled': 1.
                   telnetSerialPortPass8d 1.3.6.1.4.1.33.10.6.2.1.19 integer read-write
Control to pass unaltered the hexadecimal character '8D'. This control is added to ensure that this character will pass through directly in a session with 8-bit characters and parity odd or even. Corresponds directly to the presence of 'Telnet Pass 8D' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'disabled': 2, 'enabled': 1.
                   telnetSerialPortComControlClient 1.3.6.1.4.1.33.10.6.2.1.20 integer read-write
Control to begin Telnet comport control option negotiations as a client when a Telnet session is initiated. The comport control option enables a port to do outbound modem dialing on a Telnet connection. Corresponds to the value labeled 'Client:' in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display. Enumeration: 'disabled': 2, 'enabled': 1.
                   telnetSerialPortComControlServer 1.3.6.1.4.1.33.10.6.2.1.21 integer read-write
Control to begin Telnet comport control option negotiations as a server when a Telnet session is initiated. Corresponds to the value labeled 'Server:' in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display. Enumeration: 'disabled': 2, 'enabled': 1.
                   telnetSerialPortComControlServerRaisesDtr 1.3.6.1.4.1.33.10.6.2.1.22 integer read-write
Control for the client to request that the server raises its DTR signal on the port at the begining of the Telnet connection. Corresponds to the value labeled 'Server Raises DTR:' in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display. Enumeration: 'disabled': 2, 'enabled': 1.
                   telnetSerialPortComControlClientTogglesDtr 1.3.6.1.4.1.33.10.6.2.1.23 integer read-write
Control to respond to the server's notification that its DCD has come high (or low) by raising (or lowering) DTR accordingly on the local port. Corresponds to the value labeled 'Client Toggles DTR:' in the PORT TELNET COMPORTCONTROL CHARACTERISTICS display. Enumeration: 'disabled': 2, 'enabled': 1.
       xTn3270 1.3.6.1.4.1.33.10.7
           tn3270DeviceNumber 1.3.6.1.4.1.33.10.7.1 integer read-only
The number of entries in the tn3270 Device table.
           tn3270LanguageNumber 1.3.6.1.4.1.33.10.7.2 integer read-only
The number of entries in the tn3270 Language table.
           tn3270PortKeymapStatus 1.3.6.1.4.1.33.10.7.3 integer read-write
Control for individual ports to create their own keymaps. Corresponds directly to SERVER TN3270 PORT KEYMAPS and the value labeled 'Port Keymaps:' in the SERVER TN3270 display. Enumeration: 'disabled': 1, 'enabled': 2.
           tn3270DeviceTable 1.3.6.1.4.1.33.10.7.4 no-access
A list of tn3270 terminal device entries.
               tn3270DeviceEntry 1.3.6.1.4.1.33.10.7.4.1 no-access
Tn3270 parameter values for a terminal device entry.
                   tn3270DeviceName 1.3.6.1.4.1.33.10.7.4.1.1 displaystring read-only
The name of a generic terminal device. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER TN3270 DEVICE display.
                   tn3270DeviceStatus 1.3.6.1.4.1.33.10.7.4.1.2 integer read-write
Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the PURGE SERVER TN3270 DEVICE command. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. If a new device table entry is added to the table, the agent will copy the VT100 table as a default. If one plans to add a new table entry, one should not remove the VT100 entry. Enumeration: 'valid': 2, 'invalid': 1.
                   tn3270DeviceType 1.3.6.1.4.1.33.10.7.4.1.3 displaystring read-write
The terminal type character string for use when tn3270DeviceTn3270Type is insufficient. Corresponds directly to SERVER TN3270 DEVICE TERMINALTYPE and the value labeled 'TerminalType:' in the SERVER TN3270 DEVICE display.
                   tn3270Device3278Model 1.3.6.1.4.1.33.10.7.4.1.4 integer read-write
The 3278 model for the device. Corresponds directly to SERVER TN3270 DEVICE 3278Model and the value labeled '3278Model:' in the SERVER TN3270 DEVICE display. Enumeration: 'model2': 1, 'model5': 2.
                   tn3270DeviceKeyNumber 1.3.6.1.4.1.33.10.7.4.1.5 integer read-only
The number of Key table entries for this device.
                   tn3270DeviceScreenNumber 1.3.6.1.4.1.33.10.7.4.1.6 integer read-only
The number of Screen table entries for this device.
           tn3270KeyTable 1.3.6.1.4.1.33.10.7.5 no-access
A list of tn3270 key entries by device.
               tn3270KeyEntry 1.3.6.1.4.1.33.10.7.5.1 no-access
Tn3270 parameter values for a key entry for a device.
                   tn3270KeyDeviceName 1.3.6.1.4.1.33.10.7.5.1.1 displaystring read-only
The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER TN3270 DEVICE display.
                   tn3270KeyName 1.3.6.1.4.1.33.10.7.5.1.2 integer read-only
The key name to which this entry applies. Corresponds directly to the key portion of SERVER TN3270 DEVICE KEYMAP and the value labeled '3270-key' in the 'Keymap:' section of the SERVER TN3270 DEVICE display. Enumeration: 'pf24': 62, 'reset': 20, 'sysreq': 66, 'pf20': 58, 'fastright': 22, 'pf22': 60, 'pf23': 61, 'fieldmark': 17, 'pf1': 39, 'pf3': 41, 'pf2': 40, 'flushinput': 13, 'pf4': 42, 'tab': 2, 'pf6': 44, 'pf9': 47, 'home': 8, 'pf21': 59, 'fastleft': 21, 'cursordown': 7, 'cursorsel': 69, 'duplicate': 16, 'print': 24, 'cursorright': 6, 'pf8': 46, 'status': 19, 'centsign': 15, 'pf16': 54, 'pf19': 57, 'pf18': 56, 'insert': 12, 'pf15': 53, 'pf14': 52, 'pf17': 55, 'newline': 1, 'pf11': 49, 'pf10': 48, 'pf13': 51, 'pf12': 50, 'test': 70, 'pa1': 63, 'cursorleft': 5, 'eraseeof': 10, 'backtab': 3, 'pf7': 45, 'pa3': 65, 'clear': 68, 'showkeys': 23, 'refresh': 14, 'cursorup': 4, 'pa2': 64, 'enter': 67, 'eraseinput': 11, 'pf5': 43, 'scroll': 18, 'delete': 9.
                   tn3270KeyStatus 1.3.6.1.4.1.33.10.7.5.1.3 integer read-write
Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Enumeration: 'valid': 2, 'invalid': 1.
                   tn3270KeyCharacterSequence 1.3.6.1.4.1.33.10.7.5.1.4 octet string read-write
The ASCII character sequence for the key. Corresponds directly to the escape-sequence portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 'KeyCode' in the 'Keymap:' section of the SERVER TN3270 DEVICE display.
                   tn3270KeyDescription 1.3.6.1.4.1.33.10.7.5.1.5 displaystring read-write
Descriptive text for the key. Corresponds directly to the description portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 'Description' in the SERVER TN3270 DEVICE display.
           tn3270ScreenTable 1.3.6.1.4.1.33.10.7.6 no-access
A list of tn3270 screen action entries by device.
               tn3270ScreenEntry 1.3.6.1.4.1.33.10.7.6.1 no-access
Tn3270 parameter values for a screen action entry for a device.
                   tn3270ScreenDeviceName 1.3.6.1.4.1.33.10.7.6.1.1 displaystring read-only
The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER TN3270 DEVICE display.
                   tn3270ScreenActionName 1.3.6.1.4.1.33.10.7.6.1.2 integer read-only
The screen action to which this entry applies. Corresponds directly to the action portion of SERVER TN3270 DEVICE SCREENMAP and the value labeled 'Terminal Function' in the 'Screenmap: section of the SERVER TN3270 DEVICE display. Enumeration: 'col132': 4, 'boldoff': 9, 'colorWhite': 22, 'sgr': 33, 'colorBlue': 16, 'reset2': 29, 'blinkoff': 11, 'colorTurquoise': 20, 'charset': 7, 'boldon': 8, 'underscoreoff': 13, 'beep': 6, 'colorPink': 18, 'colorRed': 17, 'movecursor': 3, 'colorYellow': 21, 'underscoreon': 12, 'base': 32, 'reset1': 28, 'reset3': 30, 'reverseoff': 15, 'reset4': 31, 'status1': 26, 'status2': 27, 'eraseeol': 1, 'colorGreen': 19, 'clearscr': 2, 'col80': 5, 'blinkon': 10, 'reverseon': 14.
                   tn3270ScreenStatus 1.3.6.1.4.1.33.10.7.6.1.3 integer read-write
Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Enumeration: 'valid': 2, 'invalid': 1.
                   tn3270ScreenCharacterSequence 1.3.6.1.4.1.33.10.7.6.1.4 octet string read-write
The ASCII character sequence for the screen action. Some actions may have a lesser length limit. Corresponds directly to the escape-sequence portion of SERVER TN3270 DEVICE SCREENMAP and the value labeled 'HexCode' in the 'Screenmap: section of the SERVER TN3270 DEVICE display.
           tn3270LanguageTable 1.3.6.1.4.1.33.10.7.7 no-access
A list of tn3270 language entries.
               tn3270LanguageEntry 1.3.6.1.4.1.33.10.7.7.1 no-access
Tn3270 parameter values for a language entry.
                   tn3270LanguageName 1.3.6.1.4.1.33.10.7.7.1.1 displaystring read-only
The name of language for character translation tables. Corresponds directly to SERVER TN3270 LANGUAGE and the value labeled 'Language Name:' in the SERVER LANGUAGE display.
                   tn3270LanguageStatus 1.3.6.1.4.1.33.10.7.7.1.2 integer read-write
Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. If a new device table entry is added to the table, the agent will copy the USENGLSH table as the default. Enumeration: 'valid': 2, 'invalid': 1.
           eToALanguageTable 1.3.6.1.4.1.33.10.7.8 no-access
A list of language EBCDIC to ASCII conversion entries.
               eToALanguageEntry 1.3.6.1.4.1.33.10.7.8.1 no-access
EBCDIC to ASCII parameter values for a language entry.
                   eToALanguageName 1.3.6.1.4.1.33.10.7.8.1.1 displaystring read-only
The name of language from the language table.
                   eToAOffset 1.3.6.1.4.1.33.10.7.8.1.2 integer read-only
EBCDIC character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 LANGUAGE and the hexadecimal labels around the conversion table labeled 'EBCDIC to ASCII' in the SERVER LANGUAGE display.
                   eToAValue 1.3.6.1.4.1.33.10.7.8.1.3 integer read-write
ASCII character value for the EBCDIC offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled 'EBCDIC to ASCII' in the SERVER LANGUAGE display.
           aToELanguageTable 1.3.6.1.4.1.33.10.7.9 no-access
A list of language ASCII to EBCDIC conversion entries.
               aToELanguageEntry 1.3.6.1.4.1.33.10.7.9.1 no-access
ASCII to EBCDIC parameter values for a language entry.
                   aToELanguageName 1.3.6.1.4.1.33.10.7.9.1.1 displaystring read-only
The name of language from the language table.
                   aToEOffset 1.3.6.1.4.1.33.10.7.9.1.2 integer read-only
ASCII character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 LANGUAGE and the hexadecimal labels around the conversion table labeled 'ASCII to EBCDIC' in the SERVER LANGUAGE display.
                   aToEValue 1.3.6.1.4.1.33.10.7.9.1.3 integer read-write
EBCDIC character value for the ASCII offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled 'ASCII to EBCDIC' in the SERVER LANGUAGE display.
           tn3270PortTable 1.3.6.1.4.1.33.10.7.10 no-access
A list of tn3270 character port entries.
                 tn3270PortEntry 1.3.6.1.4.1.33.10.7.10.1 no-access
Parameter values for a tn3270 port.
                     tn3270PortIndex 1.3.6.1.4.1.33.10.7.10.1.1 integer read-only
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                     tn3270PortDeviceName 1.3.6.1.4.1.33.10.7.10.1.2 displaystring read-write
The name of a generic terminal device from the tn3270 device table. Corresponds directly to PORT TELNET TN3270 DEVICE and the value labeled 'Tn3270 Device:' in the PORT TELNET display.
                     tn3270PortLanguageName 1.3.6.1.4.1.33.10.7.10.1.3 displaystring read-write
The name of language from the tn3270 language table. Corresponds directly to PORT TELNET TN3270 LANGUAGE and the value labeled 'Tn3270 Language:' in the PORT TELNET display.
                     tn3270PortExtendedAttributes 1.3.6.1.4.1.33.10.7.10.1.4 integer read-write
A control indicating that certain 3270 extended attributes are supported on the port. Corresponds directly to PORT TELNET TN3270 XTDATTRS and the label 'Tn3270 XtdAttrs' following the label 'Enabled Characteristics' in the PORT TELNET display. Enumeration: 'disabled': 1, 'enabled': 2.
                     tn3270PortEorNegotiation 1.3.6.1.4.1.33.10.7.10.1.5 integer read-write
A control for negotiation of the Telnet EOR option when establishing a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 EOR and the label 'Tn3270 EOR' following the label 'Enabled Characteristics' in the PORT TELNET display. Enumeration: 'disabled': 1, 'enabled': 2.
                     tn3270PortErrorLock 1.3.6.1.4.1.33.10.7.10.1.6 integer read-write
A control for requiring use the RESET key when the host reports an error during a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 ERRORLOCK and the label 'Tn3270 ErrorLock' following the label 'Enabled Characteristics' in the PORT TELNET display. Enumeration: 'disabled': 1, 'enabled': 2.
                     tn3270PortPrinterPort 1.3.6.1.4.1.33.10.7.10.1.7 integer read-write
The port number of the tn3270 printer. Corresponds directly to PORT TELNET TN3270 PRINTER and the value labeled 'Tn3270 Printer:' in the PORT TELNET display.
                     tn3270PortOutgoingTcpPort 1.3.6.1.4.1.33.10.7.10.1.8 integer read-write
The TCP port which is used for a TN3270 session when connecting to a remote host from this serial port. Corresponds directly to the value labeled 'Tn3270 Default Port:' in the PORT TELNET CHARACTERISTICS display.
                     tn3270PortSpaceInsert 1.3.6.1.4.1.33.10.7.10.1.9 integer read-write
Control to allow insert mode within a space filled field, and write characters over EBCDIC spaces. Corresponds directly to the presence of 'Tn3270 Space_Insert' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
                     tn3270PortTypeAhead 1.3.6.1.4.1.33.10.7.10.1.10 integer read-write
Control to permit typing ahead in a tn3270 session prior to receiving a response from the host for the previous command entered. Corresponds directly to the presence of 'Tn3270 TypeAhead' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
                     tn3270PrefixKeyMap 1.3.6.1.4.1.33.10.7.10.1.11 integer read-write
Control to prepend a prefix function to another function key. When the operator hits the key the prepended function(s) and then the main function for the key are transmitted to the host. Corresponds directly to the presence of 'Tn3270 PrefixKeyMap' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
                     tn3270PortScanner 1.3.6.1.4.1.33.10.7.10.1.12 integer read-write
Indicates that this is a tn3270 scanner port. Corresponds directly to the presence of 'Tn3270 SCANNER' under the label 'Enabled Characteristics' in the PORT TELNET CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
       xKerberos 1.3.6.1.4.1.33.10.8
           kerbStatus 1.3.6.1.4.1.33.10.8.1 integer read-write
A control indicating the level of Kerberos operation on the system. Corresponds directly to SERVER KERBEROS STATUS and the value labeled 'Kerberos Security:' in the SERVER KERBEROS display. Enumeration: 'none': 1, 'login': 2.
           kerbRealm 1.3.6.1.4.1.33.10.8.2 displaystring read-write
The Kerberos realm with which the kerbServerName1 and kerbServerName2 are associated. Corresponds directly to SERVER KERBEROS REALM and the value labeled 'Kerberos Realm:' in the SERVER KERBEROS display.
           kerbQueryLimit 1.3.6.1.4.1.33.10.8.3 integer read-write
The maximum number of attempts the system can make when trying to verify a Kerberos ID. Corresponds directly to SERVER KERBEROS QUERY LIMIT and the value labeled 'Kerberos Query Limit:' in the SERVER KERBEROS display.
           kerbMasterName 1.3.6.1.4.1.33.10.8.4 displaystring read-write
The Domain name of the Kerberos master host system, which holds the Kerberos database. Corresponds directly to SERVER KERBEROS MASTER and the value labeled 'Kerberos Master:' in the SERVER KERBEROS display.
           kerbServerName1 1.3.6.1.4.1.33.10.8.5 displaystring read-write
The Domain name of the first Kerberos server to try when the system verifys a Kerberos ID. Corresponds directly to SERVER KERBEROS PRIMARY SERVER and the value labeled 'Kerberos Primary Server:' in the SERVER KERBEROS display.
           kerbServerName2 1.3.6.1.4.1.33.10.8.6 displaystring read-write
The Domain name of the Kerberos server to try when the system verifys a Kerberos ID and cannot reach the Kerberos primary server. Corresponds directly to SERVER KERBEROS SECONDARY SERVER and the value labeled 'Kerberos Secondary Server:' in the SERVER KERBEROS display.
           kerbInsecureLogins 1.3.6.1.4.1.33.10.8.7 counter read-only
The number of user logins on ports for which Kerberos user verification is not enabled. Corresponds directly to the value labeled 'Logins without Kerberos:' in the SERVER KERBEROS display.
           kerbSecureLogins 1.3.6.1.4.1.33.10.8.8 counter read-only
The number of successful user logins on ports for which Kerberos user verification is enabled. Corresponds directly to the value labeled 'Successful Logins:' in the SERVER KERBEROS display.
           kerbSecureLoginsFailed 1.3.6.1.4.1.33.10.8.9 counter read-only
The number of verification failures due to incorrect ID or password for attempted user logins on ports for which Kerberos user verification is enabled. Corresponds directly to the value labeled 'Unsuccessful Logins:' in the SERVER KERBEROS display.
           kerbPasswordChangeFailed 1.3.6.1.4.1.33.10.8.10 counter read-only
The number of user failures to change their Kerberos password due to invalid old password or new password verification. Corresponds directly to the value labeled 'Password Change Failures:' in the SERVER KERBEROS display.
           kerbError 1.3.6.1.4.1.33.10.8.11 integer read-only
The error number of the most recent Kerberos-related failure. Corresponds directly to the value labeled 'Last Kerberos Error:' in the SERVER KERBEROS display. For a list of error numbers and their meanings, consult relevant iTouch or Kerberos documentation.
           kerbErrorTime 1.3.6.1.4.1.33.10.8.12 datetime read-only
The date and time that kerbError was last updated. Corresponds directly to the value labeled 'Occurred:' in the SERVER KERBEROS display.
           kerbMasterAccess 1.3.6.1.4.1.33.10.8.13 counter read-only
The number of times the system successfully accessed the Kerberos master host. Corresponds directly to the value labeled 'Attempts to access:', 'Master', and 'Successful:' in the SERVER KERBEROS display.
           kerbMasterAccessFailed 1.3.6.1.4.1.33.10.8.14 counter read-only
The number of times the system failed access to the Kerberos master host. Corresponds directly to the value labeled 'Attempts to access:', 'Master', and 'Unsuccessful:' in the SERVER KERBEROS display.
           kerbServerAccess1 1.3.6.1.4.1.33.10.8.15 counter read-only
The number of times the system successfully accessed the Kerberos primary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Successful:' in the SERVER KERBEROS display.
           kerbServerAccessFailed1 1.3.6.1.4.1.33.10.8.16 counter read-only
The number of times the system failed access to the Kerberos primary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Unsuccessful:' in the SERVER KERBEROS display.
           kerbServerAccess2 1.3.6.1.4.1.33.10.8.17 counter read-only
The number of times the system successfully accessed the Kerberos secondary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Successful:' in the SERVER KERBEROS display.
           kerbServerAccessFailed2 1.3.6.1.4.1.33.10.8.18 counter read-only
The number of times the system failed access to the Kerberos secondary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Unsuccessful:' in the SERVER KERBEROS display.
           kerbPortTable 1.3.6.1.4.1.33.10.8.19 no-access
A list of Kerberos character port entries.
                 kerbPortEntry 1.3.6.1.4.1.33.10.8.19.1 no-access
Parameter values for a Kerberos port.
                     kerbPortIndex 1.3.6.1.4.1.33.10.8.19.1.1 integer read-only
An index value that uniquely identifies a port could relate to Kerberos. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                     kerbPortStatus 1.3.6.1.4.1.33.10.8.19.1.2 integer read-write
A control indicating the level of Kerberos operation on the port. Corresponds directly to PORT KERBEROS and the value 'Kerberos' following the label 'Enabled Characteristics' in the PORT CHARACTERISTICS display. Enumeration: 'none': 1, 'login': 2.
           kerbServerPort 1.3.6.1.4.1.33.10.8.20 integer read-write
The UDP port number on the Kerberos server where Kerberos messages are sent. Enumeration: 'experimentalPort': 750, 'standardPort': 88.
       xPortSecurity 1.3.6.1.4.1.33.10.9
           psEntryNumber 1.3.6.1.4.1.33.10.9.1 integer read-only
The number of security entries in this system's port security table with psEntryStatus of 'valid'.
           psEntryNumberLimit 1.3.6.1.4.1.33.10.9.2 integer read-only
The maximum number of security entries in this system's port security table.
           psEntryInvalidIndex 1.3.6.1.4.1.33.10.9.3 integer read-only
A value of psEntryIndex for an entry that has psEntryStatus of 'invalid'. A management station may choose this value when adding a new entry. Collisions between independent management stations simultaneously using the same number are beyond the scope of this document.
           psPortTable 1.3.6.1.4.1.33.10.9.4 no-access
A list of port security character port entries.
               psPortEntry 1.3.6.1.4.1.33.10.9.4.1 no-access
Port security parameter values for a port.
                   psPortIndex 1.3.6.1.4.1.33.10.9.4.1.1 integer read-only
An index value that uniquely identifies a port for security purposes. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                   psPortDefaultInboundAccess 1.3.6.1.4.1.33.10.9.4.1.2 integer read-write
The default access to the port for incoming TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT INBOUND and the value labeled 'Inbound Default:' in the PORT INTERNET SECURITY display. Enumeration: 'deny': 2, 'allow': 1.
                   psPortDefaultOutboundAccess 1.3.6.1.4.1.33.10.9.4.1.3 integer read-write
The default access to the port for outgoing TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT OUTBOUND and the value labeled 'Outbound Default:' in the PORT INTERNET SECURITY display. Enumeration: 'deny': 2, 'allow': 1.
                   psClrInternetSecurity 1.3.6.1.4.1.33.10.9.4.1.4 integer read-write
A control for if the internet security entries for this port will be cleared upon port logout. The default is disabled. Enumeration: 'disabled': 1, 'enabled': 2.
           psTable 1.3.6.1.4.1.33.10.9.5 no-access
A list of port security entries.
               psEntry 1.3.6.1.4.1.33.10.9.5.1 no-access
Port security parameter values for an entry for a port.
                   psEntryIndex 1.3.6.1.4.1.33.10.9.5.1.1 integer read-only
A small, numeric distinguisher for port security entries. When adding a new entry, the client should specify an unused value, such as psEntryInvalidIndex. Corresponds directly to the value labeled 'Entry' in the SERVER INTERNET SECURITY display.
                   psEntryStatus 1.3.6.1.4.1.33.10.9.5.1.2 integer read-write
Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR INTERNET SECURITY command. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Setting this object to 'valid' has no effect. When creating a new instance, one must set psEntryAddress, psEntryMask, psEntryAccess, psEntryDirection and psEntryPortList for the new instance in the same physical set request. Furthermore, if one wishes to change an entry, one must first delete it and then add it with its new values. Enumeration: 'valid': 2, 'invalid': 1.
                   psEntryAddress 1.3.6.1.4.1.33.10.9.5.1.3 ipaddress read-write
The IP address to which the entry pertains. Corresponds directly to the PORT INTERNET SECURITY internet address and the value labeled 'Internet Address' in the SERVER INTERNET SECURITY display.
                   psEntryMask 1.3.6.1.4.1.33.10.9.5.1.4 ipaddress read-write
The mask applied to psEntryAddress when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY MASK and the value labeled 'Security Mask' in the SERVER INTERNET SECURITY display.
                   psEntryAccess 1.3.6.1.4.1.33.10.9.5.1.5 integer read-write
The access to the port for TCP connections when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY ALLOW or DENY and the value labeled 'Access' in the SERVER INTERNET SECURITY display. Enumeration: 'deny': 2, 'allow': 1.
                   psEntryDirection 1.3.6.1.4.1.33.10.9.5.1.6 integer read-write
The direction of TCP connections to which this entry applies. Corresponds directly to PORT INTERNET SECURITY INBOUND or OUTBOUND and the value labeled 'Direction' in the SERVER INTERNET SECURITY display. Enumeration: 'inbound': 1, 'outbound': 2.
                   psEntryPortMap 1.3.6.1.4.1.33.10.9.5.1.7 octet string read-write
The list of character ports to which this entry applies. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the system. Port numbers are as defined for charPortIndex in the Proposed Standard Internet Character MIB. Corresponding bit numbers start with 1 as the high-order bit of the first octet. Corresponds directly to PORT INTERNET SECURITY and the value labeled 'Ports' in the SERVER INTERNET SECURITY display.
       xXremote 1.3.6.1.4.1.33.10.10
             xremoteServerName1 1.3.6.1.4.1.33.10.10.1 displaystring read-write
The Domain name of the first XREMOTE font server to try for downloading fonts. Corresponds directly to SERVER XREMOTE PRIMARY SERVER and the value labeled 'Xremote Primary Font Server:' in the SERVER XREMOTE display.
             xremoteServerName2 1.3.6.1.4.1.33.10.10.2 displaystring read-write
The Domain name of the XREMOTE font server to try for downloading fonts and the primary font server does not respond. Corresponds directly to SERVER XREMOTE SECONDARY SERVER and the value labeled 'Xremote Secondary Font Server:' in the SERVER XREMOTE display.
             xremoteServerAccess1 1.3.6.1.4.1.33.10.10.3 counter read-only
The number of times the system successfully accessed the XREMOTE primary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Successful:' in the SERVER XREMOTE display.
             xremoteServerAccessFailed1 1.3.6.1.4.1.33.10.10.4 counter read-only
The number of times the system failed access to the XREMOTE primary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Unsuccessful:' in the SERVER XREMOTE display.
             xremoteServerAccess2 1.3.6.1.4.1.33.10.10.5 counter read-only
The number of times the system successfully accessed the XREMOTE secondary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Successful:' in the SERVER XREMOTE display.
             xremoteServerAccessFailed2 1.3.6.1.4.1.33.10.10.6 counter read-only
The number of times the system failed access to the XREMOTE secondary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Unsuccessful:' in the SERVER XREMOTE display.
             xremoteSessions 1.3.6.1.4.1.33.10.10.7 gauge read-only
The number of connected XREMOTE sessions. Corresponds directly to the value labeled 'Current Number of Xremote Sessions:' in the SERVER XREMOTE display.
             xremotePortTable 1.3.6.1.4.1.33.10.10.8 no-access
A list of XREMOTE character port entries.
                 xremotePortEntry 1.3.6.1.4.1.33.10.10.8.1 no-access
XREMOTE parameter values for a port.
                     xremotePortIndex 1.3.6.1.4.1.33.10.10.8.1.1 integer read-only
An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                     xremotePortXremote 1.3.6.1.4.1.33.10.10.8.1.2 integer read-write
Control for use of XREMOTE on the port. Corresponds directly to PORT XREMOTE and the presence of the label 'Xremote' following the label 'Enabled Characteristics:' in the PORT CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
                     xremotePortXdmQuery 1.3.6.1.4.1.33.10.10.8.1.3 integer read-write
The type of query message issued by a port when searching for an X Display Manager (XDM). Corresponds directly to the PORT XDM QUERY and the 'XDM Query:' in the PORT ALTERNATE CHARACTERISTICS display Enumeration: 'specific': 1, 'broadcast': 2, 'indirect': 3.
                     xremotePortXdmHost 1.3.6.1.4.1.33.10.10.8.1.4 displaystring read-write
The Domain name or Internet address of the X Display Manager (XDM) for a port. Corresponds directly to the PORT XDM HOST and the 'XDM Host:' in the PORT ALTERNATE CHARACTERISTICS display
             xremoteServerClients 1.3.6.1.4.1.33.10.10.9 gauge read-only
The number of active X clients. Corresponds directly to the value labeled 'Current Number of XClients:' in the SERVER XREMOTE display.
       xRotary 1.3.6.1.4.1.33.10.11
             rotaryNumber 1.3.6.1.4.1.33.10.11.1 integer read-only
The number of entries in the Rotary table.
             rotaryTable 1.3.6.1.4.1.33.10.11.2 no-access
A list of rotary entries.
                 rotaryEntry 1.3.6.1.4.1.33.10.11.2.1 no-access
Parameter values for a rotary.
                     rotaryAddress 1.3.6.1.4.1.33.10.11.2.1.1 ipaddress read-only
The internet address to be recognized as a rotary. Corresponds directly to the ip-address portion of SERVER INTERNET ROTARY and the value labeled 'Internet Address' in the SERVER INTERNET ROTARY display.
                     rotaryStatus 1.3.6.1.4.1.33.10.11.2.1.2 integer read-write
Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR SERVER INTERNET ROTARY command. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Setting the value to 'valid' in conjunction with a new rotaryAddress will add a new entry to the table. When adding a new entry, one should also specify a rotaryPortMap as the DEFVAL of 0..0 for rotaryPortMap is meaningless. Enumeration: 'valid': 2, 'invalid': 1.
                     rotaryPortMap 1.3.6.1.4.1.33.10.11.2.1.3 octet string read-write
The list of character ports that compose the rotary. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the system. Port numbers are as defined for charPortIndex in the Proposed Standard Internet Character MIB. Corresponding bit numbers start with 1 as the high-order bit of the first octet. Corresponds directly to port-list portion of SERVER INTERNET ROTARY and the value labeled 'Ports' in the SERVER INTERNET ROTARY display.
       xEgp 1.3.6.1.4.1.33.10.12
             egpRouting 1.3.6.1.4.1.33.10.12.1 integer read-write
Control for EGP routing services. Enumeration: 'disabled': 1, 'enabled': 2.
             egpStatus 1.3.6.1.4.1.33.10.12.2 integer read-only
Status of the EGP routing services indicating why it is not running. Enumeration: 'noMemory': 2, 'noIpRouting': 3, 'noNeighbors': 5, 'active': 1, 'noEgpRouting': 4, 'noAS': 6.
             egpNbrTable 1.3.6.1.4.1.33.10.12.3 no-access
The EGP neighbor table.
                 egpNbrEntry 1.3.6.1.4.1.33.10.12.3.1 no-access
Information about this entity's relationship with a particular EGP neighbor.
                     egpNbrAddr 1.3.6.1.4.1.33.10.12.3.1.1 ipaddress read-only
The IP address of this entry's EGP neighbor.
                     egpNbrIntervalDead 1.3.6.1.4.1.33.10.12.3.1.2 integer read-write
The interval upon entering the cease or idle state before automatically assuming a Start Event has occured. If a neighbor does not respond within 5 minutes, a Stop Event will automatically occur. The interval is in hundredths of seconds.
                     egpNbrStatus 1.3.6.1.4.1.33.10.12.3.1.3 integer read-write
The status of the entry for this neighbor. Set to 'invalid' to remove the entry. Enumeration: 'valid': 2, 'invalid': 1.
       xOspf 1.3.6.1.4.1.33.10.13
             ospfAutoConfigure 1.3.6.1.4.1.33.10.13.1 integer read-write
Control whether OSPF will automatically configure itself. Enumeration: 'disabled': 1, 'enabled': 2.
             ospfStatus 1.3.6.1.4.1.33.10.13.2 integer read-only
Status of the OSPF routing services indicating why it is not running. Enumeration: 'noMemory': 2, 'noIpRouting': 3, 'noAreas': 5, 'noOspfRouting': 4, 'noRtrId': 7, 'noBackBoneAndInterface': 9, 'noInterfaces': 6, 'noBackBone': 10, 'active': 1, 'noBackBoneAndVirtualInterfaces': 8.
             ospfIfMtrcTable 1.3.6.1.4.1.33.10.13.3 no-access
The TOS metrics for a non-virtual interface identified by the interface index.
                 ospfIfMtrcEntry 1.3.6.1.4.1.33.10.13.3.1 no-access
A particular TOS metric for a non-virtual interface identified by the interface index.
                     ospfIfMtrcIpAddress 1.3.6.1.4.1.33.10.13.3.1.1 ipaddress read-only
Same as ospfIfMetricIpAddress in OSPF MIB, the IP address of this OSPF interface.
                     ospfIfMtrcAddressLessIf 1.3.6.1.4.1.33.10.13.3.1.2 integer read-only
Same as ospfIfMetricAddressLessIf in OSPF MIB, for the purpose of easing the instancing of addressed and addressless interfaces. This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for interfaces having no IP Address.
                     ospfIfMtrcTos 1.3.6.1.4.1.33.10.13.3.1.3 integer read-only
Same as ospfIfMetricTOS in OSPF MIB, the type of service metric being referenced.
                     ospfIfMtrcCostActual 1.3.6.1.4.1.33.10.13.3.1.4 integer read-only
The actual cost of the metric in case it was set to auto.
             ospfXIfTable 1.3.6.1.4.1.33.10.13.4 no-access
The TOS metrics for a non-virtual interface identified by the interface index.
                 ospfXIfEntry 1.3.6.1.4.1.33.10.13.4.1 no-access
Interface parameters for OSPF.
                     ospfXIfIpAddress 1.3.6.1.4.1.33.10.13.4.1.1 ipaddress read-only
Same as ospfIfIpAddress in OSPF MIB, the IP address of this OSPF interface.
                     ospfXIfAddressLessIf 1.3.6.1.4.1.33.10.13.4.1.2 integer read-only
Same as ospfIfAddressLessIf in OSPF MIB, for the purpose of easing the instancing of addressed and addressless interfaces. This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for interfaces having no IP Address.
                     ospfXIfTypeActual 1.3.6.1.4.1.33.10.13.4.1.3 integer read-only
The interface type. Enumeration: 'broadcast': 1, 'nonbroadcast': 2, 'pointToPoint': 3.
                     ospfXIfStatus 1.3.6.1.4.1.33.10.13.4.1.4 integer read-write
The status of the interface entry, including the entry in the standard OSPF MIB. Set to 'invalid' to remove the entry. Enumeration: 'valid': 2, 'invalid': 1.
             ospfXAreaTable 1.3.6.1.4.1.33.10.13.5 no-access
Parameters for an OSPF area.
                 ospfXAreaEntry 1.3.6.1.4.1.33.10.13.5.1 no-access
An area entry.
                     ospfXAreaId 1.3.6.1.4.1.33.10.13.5.1.1 ipaddress read-only
Same as ospfAreaId in OSPF MIB, the ID of the area.
                     ospfXAreaStatus 1.3.6.1.4.1.33.10.13.5.1.2 integer read-write
The status of the area entry, including the entry in the standard OSPF MIB. Set to 'invalid' to remove the entry. Enumeration: 'valid': 2, 'invalid': 1.
       xRouterIp 1.3.6.1.4.1.33.10.14
             ipAdExtTable 1.3.6.1.4.1.33.10.14.1 no-access
Table of additional fields indexed by local IP address. An entry in this table is created or deleted when an entry in the ipAddrTable is created or deleted.
                 ipAdExtEntry 1.3.6.1.4.1.33.10.14.1.1 no-access
A particular entry.
                     ipAdEntExtAddress 1.3.6.1.4.1.33.10.14.1.1.1 ipaddress read-only
Same as ipAdEntAddr, a local address representing a network connection.
                     ipAdEntExtProxyArp 1.3.6.1.4.1.33.10.14.1.1.2 integer read-write
Controls whether proxy ARP is active for this local address. Enumeration: 'disabled': 1, 'enabled': 2.
                     ipAdEntExtRip 1.3.6.1.4.1.33.10.14.1.1.3 integer read-only
Controls whether RIP as a router discovery protocol is active for this local address. Enumeration: 'disabled': 1, 'enabled': 2.
             ipRouterIfTable 1.3.6.1.4.1.33.10.14.2 no-access
Table of IP router values indexed by interface.
                 ipRouterIfEntry 1.3.6.1.4.1.33.10.14.2.1 no-access
A particular entry.
                     ipRouterIfIndex 1.3.6.1.4.1.33.10.14.2.1.1 integer read-only
The index of the interface; same as IfIndex.
                     ipRouterIfProtocolPriority 1.3.6.1.4.1.33.10.14.2.1.2 integer read-write
The priority at which all Internet routed packets will be placed on the WAN output queue. Enumeration: 'high': 5, 'medium': 3, 'low': 1.
                     ipRouterIfMTU 1.3.6.1.4.1.33.10.14.2.1.3 integer read-write
The size of the largest datagram that IP can transmit on this interface. The default value is actually hardware dependent.
                     ipRouterIfRDP 1.3.6.1.4.1.33.10.14.2.1.4 integer read-write
Control for whether the router side of the Router Discovery Protocol is running on this interface. Enumeration: 'disabled': 2, 'enabled': 1.
                     ipRouterIfArpPacketsIn 1.3.6.1.4.1.33.10.14.2.1.5 counter read-only
The number of ARP packets received on this interface.
                     ipRouterIfArpPacketsOut 1.3.6.1.4.1.33.10.14.2.1.6 counter read-only
The number of ARP packets sent on this interface.
                     ipRouterIfPacketsIn 1.3.6.1.4.1.33.10.14.2.1.7 counter read-only
The number of IP packets received on this interface.
                     ipRouterIfPacketsOut 1.3.6.1.4.1.33.10.14.2.1.8 counter read-only
The number of IP packets sent on this interface.
                     ipRouterIfForwardsIn 1.3.6.1.4.1.33.10.14.2.1.9 counter read-only
The number of IP packets received on this interface that were forwarded.
                     ipRouterIfForwardsOut 1.3.6.1.4.1.33.10.14.2.1.10 counter read-only
The number of IP packets sent on this interface that were forwarded.
             xIpTraffic 1.3.6.1.4.1.33.10.14.3
                 ipTrafficSort 1.3.6.1.4.1.33.10.14.3.1 integer read-write
Setting to 'execute' causes the most recent traffic information to be sorted into the ipTrafficTable. The sorting precedence is: decreasing percentage, increasing destination address, increasing source address, and increasing interface number. Setting to 'ready' has no effect. Enumeration: 'ready': 1, 'execute': 2.
                 ipTrafficTable 1.3.6.1.4.1.33.10.14.3.2 no-access
A list of traffic entries, sorted in the order specified by ipTrafficSort.
                     ipTrafficEntry 1.3.6.1.4.1.33.10.14.3.2.1 no-access
A traffic entry.
                         ipTrafficIndex 1.3.6.1.4.1.33.10.14.3.2.1.1 integer read-only
Identification of this traffic entry.
                         ipTrafficPercent 1.3.6.1.4.1.33.10.14.3.2.1.2 integer read-only
The percentage of total traffic that this traffic entry represents, in tenths of a percent.
                         ipTrafficDstAddr 1.3.6.1.4.1.33.10.14.3.2.1.3 ipaddress read-only
The destination IP address of the traffic entry.
                         ipTrafficSrcAddr 1.3.6.1.4.1.33.10.14.3.2.1.4 ipaddress read-only
The source IP address of the traffic entry.
                         ipTrafficProtocol 1.3.6.1.4.1.33.10.14.3.2.1.5 integer read-only
The IP protocol type of the traffic entry.
                         ipTrafficDstPort 1.3.6.1.4.1.33.10.14.3.2.1.6 integer read-only
The destination TCP/UDP port of the traffic entry.
                         ipTrafficSrcPort 1.3.6.1.4.1.33.10.14.3.2.1.7 integer read-only
The source TCP/UDP port of the traffic entry.
                         ipTrafficIf 1.3.6.1.4.1.33.10.14.3.2.1.8 integer read-only
The inbound interface to which the traffic entry applies. This value is the same as IfIndex.
                 ipTrafficMonitoring 1.3.6.1.4.1.33.10.14.3.3 integer read-write
Control for whether the router side of the Router Discovery Protocol is running on this interface. Enumeration: 'disabled': 2, 'enabled': 1.
             xIpNetToMediaTable 1.3.6.1.4.1.33.10.14.4 no-access
iTouch extensions to the IP Address Translation Table.
                 xIpNetToMediaEntry 1.3.6.1.4.1.33.10.14.4.1 no-access
Entry parameters.
                     xIpNetToMediaCircuit 1.3.6.1.4.1.33.10.14.4.1.1 integer read-write
An additional identifier for the circuit (i.e. Frame Relay DLCI or X.25 VC) which the entry extends.
                     xIpNetToMediaReverseArp 1.3.6.1.4.1.33.10.14.4.1.2 integer read-write
Whether reverse ARP is supported on this entry. Enumeration: 'disabled': 1, 'enabled': 2.
       xRouterUdp 1.3.6.1.4.1.33.10.15
             udpBcstServerTable 1.3.6.1.4.1.33.10.15.1 no-access
Table of servers to whom UDP broadcast messages will be forwarded.
                 udpBcstServerEntry 1.3.6.1.4.1.33.10.15.1.1 no-access
A particular entry.
                     udpBcstServerAddress 1.3.6.1.4.1.33.10.15.1.1.1 ipaddress read-only
Internet address of the server.
                     udpBcstServerStatus 1.3.6.1.4.1.33.10.15.1.1.2 integer read-write
The status of the server. Set to 'invalid' to remove the entry. Enumeration: 'valid': 2, 'invalid': 1.
             udpBcstPortTable 1.3.6.1.4.1.33.10.15.2 no-access
Table of incoming UDP destination port numbers for which UDP broadcasts will be forwarded.
                 udpBcstPortEntry 1.3.6.1.4.1.33.10.15.2.1 no-access
A particular entry.
                     udpBcstPort 1.3.6.1.4.1.33.10.15.2.1.1 integer read-only
The incoming destination UDP port number.
                     udpBcstPortStatus 1.3.6.1.4.1.33.10.15.2.1.2 integer read-write
The status of broadcast forwarding for the port. Set to 'invalid' to remove the entry. Enumeration: 'valid': 2, 'invalid': 1.
             udpBcstRouting 1.3.6.1.4.1.33.10.15.3 integer read-write
The indication of whether this entity forwards UDP broadcasts. Enumeration: 'disabled': 1, 'enabled': 2.
       xRouterPolicy 1.3.6.1.4.1.33.10.16
             xImport 1.3.6.1.4.1.33.10.16.1
                 impEgpRuleTable 1.3.6.1.4.1.33.10.16.1.1 no-access
The EGP import table.
                     impEgpRuleEntry 1.3.6.1.4.1.33.10.16.1.1.1 no-access
An EGP import rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the route learned from the neighbor. The AS can be set to a wild card as can the IP network. When a route is learned from a neighbor, the most specific import rule is applied to the route. The route is either accepted or discarded and its metrics are applied according to the rule. An exact match on the AS and IP network is the most exact rule. An exact match on the AS and a wild card match on the IP network is the 2nd most exact rule. A wild card match on the AS and an exact match on the IP network is the 3rd most exact match. Finally, a total wild card match is the least exact rule.
                         impEgpRuleAs 1.3.6.1.4.1.33.10.16.1.1.1.1 integer read-only
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
                         impEgpRuleNetwork 1.3.6.1.4.1.33.10.16.1.1.1.2 ipaddress read-only
The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network.
                         impEgpRuleAction 1.3.6.1.4.1.33.10.16.1.1.1.3 integer read-write
Control whether the route is learned or discarded. Enumeration: 'discard': 1, 'accept': 2.
                         impEgpRulePreference 1.3.6.1.4.1.33.10.16.1.1.1.4 integer read-write
Preference to be stored with the route. The lower preference is preferred.
                         impEgpRuleType 1.3.6.1.4.1.33.10.16.1.1.1.5 integer read-write
Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2.
                         impEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.1.1.1.6 integer read-write
How to apply the impEgpRuleMetric field to the metric learned with the route before storing it in the routing table. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                         impEgpRuleMetric 1.3.6.1.4.1.33.10.16.1.1.1.7 integer read-write
Metric value to be applied to the metric learned learned with the route before storing it in the routing table.
                         impEgpRuleStatus 1.3.6.1.4.1.33.10.16.1.1.1.8 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 impOspfRuleTable 1.3.6.1.4.1.33.10.16.1.2 no-access
The OSPF import table.
                     impOspfRuleEntry 1.3.6.1.4.1.33.10.16.1.2.1 no-access
An OSPF import rule. Each rule is keyed by the IP network of the route and the AS from which it was learned. The Ip network and the AS can both be set to a wild card. When an OSPF route is added to the routing table, the most specific import rule is applied to set the preference of the route. An exact match on the Ip network and on the AS is the most exact rule. An exact match on the IP network and a wild card match on the AS is the 2nd most exact rule. A wild card match on both the on the AS and IP network is the next and least exact rule.
                         impOspfRuleNetwork 1.3.6.1.4.1.33.10.16.1.2.1.1 ipaddress read-only
The IP network of the route. The value 255.255.255.255 is a wild card matching any network.
                         impOspfRulePreference 1.3.6.1.4.1.33.10.16.1.2.1.2 integer read-write
Preference to be stored with the route. The lower preference is preferred.
                         impOspfRuleStatus 1.3.6.1.4.1.33.10.16.1.2.1.3 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 impRipRuleTable 1.3.6.1.4.1.33.10.16.1.3 no-access
The RIP import table.
                     impRipRuleEntry 1.3.6.1.4.1.33.10.16.1.3.1 no-access
A RIP import rule. Each rule is keyed by the interface and the IP network of the route learned from the neighbor. The route is either accepted or discarded and its metrics are applied according to the rule. An exact match on the IP network is the rule that will be applied. If an exact match does not exist, the rule with the wild card IP network is used.
                         impRipRuleFromIf 1.3.6.1.4.1.33.10.16.1.3.1.1 ipaddress read-only
The interface index of the interface where the rule applies, same as ifIndex.
                         impRipRuleNetwork 1.3.6.1.4.1.33.10.16.1.3.1.2 ipaddress read-only
The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network.
                         impRipRuleAction 1.3.6.1.4.1.33.10.16.1.3.1.3 integer read-write
Control whether the route is learned or discarded. Enumeration: 'discard': 1, 'accept': 2.
                         impRipRulePreference 1.3.6.1.4.1.33.10.16.1.3.1.4 integer read-write
Preference to be stored with the route. The lower preference are preferred.
                         impRipRuleType 1.3.6.1.4.1.33.10.16.1.3.1.5 integer read-write
Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2.
                         impRipRuleMetricAction 1.3.6.1.4.1.33.10.16.1.3.1.6 integer read-write
How to apply the impRipRuleMetric field to the metric learned with the route before storing it in the routing table. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                         impRipRuleMetric 1.3.6.1.4.1.33.10.16.1.3.1.7 integer read-write
Metric value to be applied to the metric learned learned with the route before storing it in the routing table.
                         impRipRuleStatus 1.3.6.1.4.1.33.10.16.1.3.1.8 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 impIsisRuleTable 1.3.6.1.4.1.33.10.16.1.4 no-access
The Isis import table.
                     impIsisRuleEntry 1.3.6.1.4.1.33.10.16.1.4.1 no-access
An Isis import rule. Each rule is keyed by the IP network of the route learned from the neighbor. The route is either accepted or discarded and its metrics are applied according to the rule. An exact match on the IP network is the rule that will be applied. If an exact match does not exist, the rule with the wild card IP network is used.
                         impIsisRuleNetwork 1.3.6.1.4.1.33.10.16.1.4.1.1 ipaddress read-only
The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network.
                         impIsisRuleAction 1.3.6.1.4.1.33.10.16.1.4.1.2 integer read-write
Control whether the route is learned or discarded. Enumeration: 'discard': 1, 'accept': 2.
                         impIsisRulePreference 1.3.6.1.4.1.33.10.16.1.4.1.3 integer read-write
Preference to be stored with the route. The lower preference are preferred.
                         impIsisRuleType 1.3.6.1.4.1.33.10.16.1.4.1.4 integer read-write
Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2.
                         impIsisRuleMetricAction 1.3.6.1.4.1.33.10.16.1.4.1.5 integer read-write
How to apply the impIsisRuleMetric field to the metric learned with the route before storing it in the routing table. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                         impIsisRuleMetric 1.3.6.1.4.1.33.10.16.1.4.1.6 integer read-write
Metric value to be applied to the metric learned learned with the route before storing it in the routing table.
                         impIsisRuleStatus 1.3.6.1.4.1.33.10.16.1.4.1.7 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
             xExport 1.3.6.1.4.1.33.10.16.2
                 expEgpToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.1 no-access
The EGP to EGP export table.
                     expEgpToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.1.1 no-access
An EGP to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The neighbor (to) AS can be set to a wild card as can the IP network and the (from) AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network From AS Rank exact exact exact 1st exact exact wild card 2nd exact wild card exact 3rd exact wild card wild card 4th wild card exact exact 5th wild card exact wild card 6th wild card wild card exact 7th wild card wild card wild card 8th
                         expEgpToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.1.1.1 integer read-only
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
                         expEgpToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.1.1.2 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                         expEgpToEgpRuleFromAs 1.3.6.1.4.1.33.10.16.2.1.1.3 integer read-only
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.
                         expEgpToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.1.1.4 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                         expEgpToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.1.1.5 integer read-write
How to apply the expEgpToEgpRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                         expEgpToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.1.1.6 integer read-write
Metric value to be applied to the metric in the route table entry before the route is advertised.
                         expEgpToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.1.1.7 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 expOspfToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.2 no-access
The OSPF to EGP export table.
                     expOspfToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.2.1 no-access
An OSPF to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the OSPF route in the routing table, and the Autonomous System from which the route was learned. The neighbor (to) AS can be set to a wild card as can the IP network and the (from) AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network From AS Rank exact exact exact 1st exact exact wild card 2nd exact wild card exact 3rd exact wild card wild card 4th wild card exact exact 5th wild card exact wild card 6th wild card wild card exact 7th wild card wild card wild card 8th
                         expOspfToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.2.1.1 integer read-only
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
                         expOspfToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.2.1.2 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                         expOspfToEgpRuleFromAs 1.3.6.1.4.1.33.10.16.2.2.1.3 integer read-only
The Autonomous System of the route in the route table. Local indicates that the route was not an external OSPF route. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the local AS.
                         expOspfToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.2.1.4 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                         expOspfToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.2.1.5 integer read-write
How to apply the expOspfToEgpRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                         expOspfToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.2.1.6 integer read-write
Metric value to be applied to the metric in the route table entry before the route is advertised.
                         expOspfToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.2.1.7 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 expStaticToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.3 no-access
The Static to EGP export table.
                     expStaticToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.3.1 no-access
An Static to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Static route in the routing table. The neighbor (to) AS can be set to a wild card as can the IP network. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
                         expStaticToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.3.1.1 integer read-only
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
                         expStaticToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.3.1.2 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                         expStaticToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.3.1.3 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                         expStaticToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.3.1.4 integer read-write
How to apply the expStaticToEgpRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                         expStaticToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.3.1.5 integer read-write
Metric value to be applied to the metric in the route table entry before the route is advertised.
                         expStaticToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.3.1.6 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 expEgpToOspfRuleTable 1.3.6.1.4.1.33.10.16.2.4 no-access
The EGP to OSPF export table.
                     expEgpToOspfRuleEntry 1.3.6.1.4.1.33.10.16.2.4.1 no-access
An EGP to OSPF export rule. Each rule is keyed by the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The Ip network can be set to a wild card as can the (from) AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
                         expEgpToOspfRuleNetwork 1.3.6.1.4.1.33.10.16.2.4.1.1 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                         expEgpToOspfRuleFromAs 1.3.6.1.4.1.33.10.16.2.4.1.2 integer read-only
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.
                         expEgpToOspfRuleAction 1.3.6.1.4.1.33.10.16.2.4.1.3 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                         expEgpToOspfRuleStatus 1.3.6.1.4.1.33.10.16.2.4.1.4 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 expRipToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.5 no-access
The Rip to EGP export table.
                     expRipToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.5.1 no-access
An Rip to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Rip route in the routing table. The neighbor (to) AS can be set to a wild card as can the IP network. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
                         expRipToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.5.1.1 integer read-only
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
                         expRipToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.5.1.2 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                         expRipToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.5.1.3 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                         expRipToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.5.1.4 integer read-write
How to apply the expRipToEgpRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                         expRipToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.5.1.5 integer read-write
Metric value to be applied to the metric in the route table entry before the route is advertised.
                         expRipToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.5.1.6 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 expRipToOspfRuleTable 1.3.6.1.4.1.33.10.16.2.6 no-access
The RIP to OSPF export table.
                     expRipToOspfRuleEntry 1.3.6.1.4.1.33.10.16.2.6.1 no-access
A RIP to OSPF export rule. Each rule is keyed by the IP network of the RIP route in the routing table. The IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd
                         expRipToOspfRuleNetwork 1.3.6.1.4.1.33.10.16.2.6.1.1 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                         expRipToOspfRuleAction 1.3.6.1.4.1.33.10.16.2.6.1.2 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                         expRipToOspfRuleStatus 1.3.6.1.4.1.33.10.16.2.6.1.3 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 expEgpToRipRuleTable 1.3.6.1.4.1.33.10.16.2.7 no-access
The EGP to RIP export table.
                     expEgpToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.7.1 no-access
An EGP to RIP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
                         expEgpToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.7.1.1 ipaddress read-only
The IP address of the RIP interface to which the rule applies.
                         expEgpToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.7.1.2 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                         expEgpToRipRuleFromAs 1.3.6.1.4.1.33.10.16.2.7.1.3 integer read-only
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.
                         expEgpToRipRuleAction 1.3.6.1.4.1.33.10.16.2.7.1.4 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                         expEgpToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.7.1.5 integer read-write
How to apply the expEgpToRipRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                         expEgpToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.7.1.6 integer read-write
Metric value to be applied to the metric in the route table entry before the route is advertised.
                         expEgpToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.7.1.7 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 expOspfToRipRuleTable 1.3.6.1.4.1.33.10.16.2.8 no-access
The OSPF to RIP export table.
                     expOspfToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.8.1 no-access
An Ospf to RIP export rule. Each rule is keyed by the Autonomous System of the Ospf neighbor, the IP network of the Ospf route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th
                         expOspfToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.8.1.1 ipaddress read-only
The IP address of the RIP interface to which the rule applies.
                         expOspfToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.8.1.2 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                         expOspfToRipRuleFromAs 1.3.6.1.4.1.33.10.16.2.8.1.3 integer read-only
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the local AS.
                         expOspfToRipRuleAction 1.3.6.1.4.1.33.10.16.2.8.1.4 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                         expOspfToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.8.1.5 integer read-write
How to apply the expOspfToRipRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                         expOspfToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.8.1.6 integer read-write
Metric value to be applied to the metric in the route table entry before the route is advertised.
                         expOspfToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.8.1.7 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. The same is true for the all wild cards where the AS is set to local Enumeration: 'valid': 2, 'invalid': 1.
                 expRipToRipRuleTable 1.3.6.1.4.1.33.10.16.2.9 no-access
The Rip to Rip export table.
                     expRipToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.9.1 no-access
An Rip to Rip export rule. Each rule is keyed by the IP network of the Rip route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd
                         expRipToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.9.1.1 ipaddress read-only
The IP address of the RIP interface to which the rule applies.
                         expRipToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.9.1.2 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                         expRipToRipRuleAction 1.3.6.1.4.1.33.10.16.2.9.1.3 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                         expRipToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.9.1.4 integer read-write
How to apply the expRipToRipRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                         expRipToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.9.1.5 integer read-write
Metric value to be applied to the metric in the route table entry before the route is advertised.
                         expRipToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.9.1.6 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 expStaticToRipRuleTable 1.3.6.1.4.1.33.10.16.2.10 no-access
The Static to Rip export table.
                       expStaticToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.10.1 no-access
An Static to Rip export rule. Each rule is keyed by the IP network of the Static route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd
                           expStaticToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.10.1.1 ipaddress read-only
The IP address of the RIP interface to which the rule applies.
                           expStaticToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.10.1.2 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                           expStaticToRipRuleAction 1.3.6.1.4.1.33.10.16.2.10.1.3 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                           expStaticToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.10.1.4 integer read-write
How to apply the expStaticToRipRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expStaticToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.10.1.5 integer read-write
Metric value to be applied to the metric in the route table entry before the route is advertised.
                           expStaticToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.10.1.6 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 expIsisToEgpRuleTable 1.3.6.1.4.1.33.10.16.2.11 no-access
The Isis to EGP export table.
                       expIsisToEgpRuleEntry 1.3.6.1.4.1.33.10.16.2.11.1 no-access
An Isis to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Isis route in the routing table. The neighbor (to) AS can be set to a wild card as can the IP network. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: To As IP Network Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th .
                           expIsisToEgpRuleToAs 1.3.6.1.4.1.33.10.16.2.11.1.1 integer read-only
The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number.
                           expIsisToEgpRuleNetwork 1.3.6.1.4.1.33.10.16.2.11.1.2 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                           expIsisToEgpRuleAction 1.3.6.1.4.1.33.10.16.2.11.1.3 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                           expIsisToEgpRuleMetricAction 1.3.6.1.4.1.33.10.16.2.11.1.4 integer read-write
How to apply the expIsisToEgpRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expIsisToEgpRuleMetric 1.3.6.1.4.1.33.10.16.2.11.1.5 integer read-write
Metric value to be applied to the metric in the route table entry before the route is advertised.
                           expIsisToEgpRuleStatus 1.3.6.1.4.1.33.10.16.2.11.1.6 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 expIsisToOspfRuleTable 1.3.6.1.4.1.33.10.16.2.12 no-access
The Isis to Ospf export table.
                       expIsisToOspfRuleEntry 1.3.6.1.4.1.33.10.16.2.12.1 no-access
An Isis to Ospf export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .
                           expIsisToOspfRuleNetwork 1.3.6.1.4.1.33.10.16.2.12.1.1 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                           expIsisToOspfRuleAction 1.3.6.1.4.1.33.10.16.2.12.1.2 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                           expIsisToOspfRuleStatus 1.3.6.1.4.1.33.10.16.2.12.1.3 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 expIsisToRipRuleTable 1.3.6.1.4.1.33.10.16.2.13 no-access
The Isis to Rip export table.
                       expIsisToRipRuleEntry 1.3.6.1.4.1.33.10.16.2.13.1 no-access
An Isis to Rip export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .
                           expIsisToRipRuleToIf 1.3.6.1.4.1.33.10.16.2.13.1.1 ipaddress read-only
The IP address of the RIP interface to which the rule applies.
                           expIsisToRipRuleNetwork 1.3.6.1.4.1.33.10.16.2.13.1.2 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                           expIsisToRipRuleAction 1.3.6.1.4.1.33.10.16.2.13.1.3 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                           expIsisToRipRuleMetricAction 1.3.6.1.4.1.33.10.16.2.13.1.4 integer read-write
How to apply the expIsisToRipRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expIsisToRipRuleMetric 1.3.6.1.4.1.33.10.16.2.13.1.5 integer read-write
Metric value to be applied to the metric in the route table entry before the route is advertised.
                           expIsisToRipRuleStatus 1.3.6.1.4.1.33.10.16.2.13.1.6 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 expEgpToIsisRuleTable 1.3.6.1.4.1.33.10.16.2.14 no-access
The EGP to Isis export table.
                       expEgpToIsisRuleEntry 1.3.6.1.4.1.33.10.16.2.14.1 no-access
An EGP to Isis export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th .
                           expEgpToIsisRuleNetwork 1.3.6.1.4.1.33.10.16.2.14.1.1 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                           expEgpToIsisRuleFromAs 1.3.6.1.4.1.33.10.16.2.14.1.2 integer read-only
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number.
                           expEgpToIsisRuleAction 1.3.6.1.4.1.33.10.16.2.14.1.3 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                           expEgpToIsisRuleMetricType 1.3.6.1.4.1.33.10.16.2.14.1.4 integer read-write
Whether to advertise the metric as Internal or External. Enumeration: 'internal': 1, 'external': 2.
                           expEgpToIsisRuleDefaultMetricAction 1.3.6.1.4.1.33.10.16.2.14.1.5 integer read-write
How to apply the expEgpToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expEgpToIsisRuleDefaultMetric 1.3.6.1.4.1.33.10.16.2.14.1.6 integer read-write
Default metric value to be applied to the metric in the route table entry before the route is advertised.
                           expEgpToIsisRuleDelayMetricAction 1.3.6.1.4.1.33.10.16.2.14.1.7 integer read-write
How to apply the expEgpToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expEgpToIsisRuleDelayMetric 1.3.6.1.4.1.33.10.16.2.14.1.8 integer read-write
Delay metric value to be applied to the metric in the route table entry before the route is advertised.
                           expEgpToIsisRuleErrorMetricAction 1.3.6.1.4.1.33.10.16.2.14.1.9 integer read-write
How to apply the expEgpToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expEgpToIsisRuleErrorMetric 1.3.6.1.4.1.33.10.16.2.14.1.10 integer read-write
Error metric value to be applied to the metric in the route table entry before the route is advertised.
                           expEgpToIsisRuleExpenseMetricAction 1.3.6.1.4.1.33.10.16.2.14.1.11 integer read-write
How to apply the expEgpToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expEgpToIsisRuleExpenseMetric 1.3.6.1.4.1.33.10.16.2.14.1.12 integer read-write
Expense metric value to be applied to the metric in the route table entry before the route is advertised.
                           expEgpToIsisRuleStatus 1.3.6.1.4.1.33.10.16.2.14.1.13 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 expOspfToIsisRuleTable 1.3.6.1.4.1.33.10.16.2.15 no-access
The Ospf to Isis export table.
                       expOspfToIsisRuleEntry 1.3.6.1.4.1.33.10.16.2.15.1 no-access
An Ospf to Isis export rule. Each rule is keyed by the Autonomous System of the Ospf neighbor, the IP network of the Ospf route in the routing table, and the Autonomous System from which the route was learned. The IP network can be set to a wild card as can the the from AS. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network From AS Best Match Rank exact exact 1st exact wild card 2nd wild card exact 3rd wild card wild card 4th .
                           expOspfToIsisRuleNetwork 1.3.6.1.4.1.33.10.16.2.15.1.1 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                           expOspfToIsisRuleFromAs 1.3.6.1.4.1.33.10.16.2.15.1.2 integer read-only
The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number, and the value 65534 is for routes within the local AS.
                           expOspfToIsisRuleAction 1.3.6.1.4.1.33.10.16.2.15.1.3 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                           expOspfToIsisRuleMetricType 1.3.6.1.4.1.33.10.16.2.15.1.4 integer read-write
Whether to advertise the metric as Internal or External. Enumeration: 'internal': 1, 'external': 2.
                           expOspfToIsisRuleDefaultMetricAction 1.3.6.1.4.1.33.10.16.2.15.1.5 integer read-write
How to apply the expOspfToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expOspfToIsisRuleDefaultMetric 1.3.6.1.4.1.33.10.16.2.15.1.6 integer read-write
Default metric value to be applied to the metric in the route table entry before the route is advertised.
                           expOspfToIsisRuleDelayMetricAction 1.3.6.1.4.1.33.10.16.2.15.1.7 integer read-write
How to apply the expOspfToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expOspfToIsisRuleDelayMetric 1.3.6.1.4.1.33.10.16.2.15.1.8 integer read-write
Delay metric value to be applied to the metric in the route table entry before the route is advertised.
                           expOspfToIsisRuleErrorMetricAction 1.3.6.1.4.1.33.10.16.2.15.1.9 integer read-write
How to apply the expOspfToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expOspfToIsisRuleErrorMetric 1.3.6.1.4.1.33.10.16.2.15.1.10 integer read-write
Error metric value to be applied to the metric in the route table entry before the route is advertised.
                           expOspfToIsisRuleExpenseMetricAction 1.3.6.1.4.1.33.10.16.2.15.1.11 integer read-write
How to apply the expOspfToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expOspfToIsisRuleExpenseMetric 1.3.6.1.4.1.33.10.16.2.15.1.12 integer read-write
Expense metric value to be applied to the metric in the route table entry before the route is advertised.
                           expOspfToIsisRuleStatus 1.3.6.1.4.1.33.10.16.2.15.1.13 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. The same is true for the all wild cards where the AS is set to local Enumeration: 'valid': 2, 'invalid': 1.
                 expRipToIsisRuleTable 1.3.6.1.4.1.33.10.16.2.16 no-access
The Isis to Isis export table.
                       expRipToIsisRuleEntry 1.3.6.1.4.1.33.10.16.2.16.1 no-access
An Isis to Isis export rule. Each rule is keyed by the IP network of the Isis route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .
                           expRipToIsisRuleNetwork 1.3.6.1.4.1.33.10.16.2.16.1.1 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                           expRipToIsisRuleAction 1.3.6.1.4.1.33.10.16.2.16.1.2 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                           expRipToIsisRuleMetricType 1.3.6.1.4.1.33.10.16.2.16.1.3 integer read-write
Whether to advertise the metric as Internal or External. Enumeration: 'internal': 1, 'external': 2.
                           expRipToIsisRuleDefaultMetricAction 1.3.6.1.4.1.33.10.16.2.16.1.4 integer read-write
How to apply the expRipToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expRipToIsisRuleDefaultMetric 1.3.6.1.4.1.33.10.16.2.16.1.5 integer read-write
Default metric value to be applied to the metric in the route table entry before the route is advertised.
                           expRipToIsisRuleDelayMetricAction 1.3.6.1.4.1.33.10.16.2.16.1.6 integer read-write
How to apply the expRipToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expRipToIsisRuleDelayMetric 1.3.6.1.4.1.33.10.16.2.16.1.7 integer read-write
Delay metric value to be applied to the metric in the route table entry before the route is advertised.
                           expRipToIsisRuleErrorMetricAction 1.3.6.1.4.1.33.10.16.2.16.1.8 integer read-write
How to apply the expRipToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expRipToIsisRuleErrorMetric 1.3.6.1.4.1.33.10.16.2.16.1.9 integer read-write
Error metric value to be applied to the metric in the route table entry before the route is advertised.
                           expRipToIsisRuleExpenseMetricAction 1.3.6.1.4.1.33.10.16.2.16.1.10 integer read-write
How to apply the expRipToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expRipToIsisRuleExpenseMetric 1.3.6.1.4.1.33.10.16.2.16.1.11 integer read-write
Expense metric value to be applied to the metric in the route table entry before the route is advertised.
                           expRipToIsisRuleStatus 1.3.6.1.4.1.33.10.16.2.16.1.12 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
                 expStaticToIsisRuleTable 1.3.6.1.4.1.33.10.16.2.17 no-access
The Static to Isis export table.
                       expStaticToIsisRuleEntry 1.3.6.1.4.1.33.10.16.2.17.1 no-access
An Static to Isis export rule. Each rule is keyed by the IP network of the Static route in the routing table. The neighbor IP network can be set to a wild card. The route is either accepted to be advertised to the neighbor or discarded from being advertised, and its metric is applied according to the rule. The best match is as follows: IP Network Best Match Rank exact 1st wild card 2nd .
                           expStaticToIsisRuleNetwork 1.3.6.1.4.1.33.10.16.2.17.1.1 ipaddress read-only
The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network.
                           expStaticToIsisRuleAction 1.3.6.1.4.1.33.10.16.2.17.1.2 integer read-write
Control whether the route is advertised or not. Enumeration: 'advertise': 2, 'hide': 1.
                           expStaticToIsisRuleMetricType 1.3.6.1.4.1.33.10.16.2.17.1.3 integer read-write
Whether to advertise the metric as Internal or External. Enumeration: 'internal': 1, 'external': 2.
                           expStaticToIsisRuleDefaultMetricAction 1.3.6.1.4.1.33.10.16.2.17.1.4 integer read-write
How to apply the expStaticToIsisDefaultRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expStaticToIsisRuleDefaultMetric 1.3.6.1.4.1.33.10.16.2.17.1.5 integer read-write
Default metric value to be applied to the metric in the route table entry before the route is advertised.
                           expStaticToIsisRuleDelayMetricAction 1.3.6.1.4.1.33.10.16.2.17.1.6 integer read-write
How to apply the expStaticToIsisDelayRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expStaticToIsisRuleDelayMetric 1.3.6.1.4.1.33.10.16.2.17.1.7 integer read-write
Delay metric value to be applied to the metric in the route table entry before the route is advertised.
                           expStaticToIsisRuleErrorMetricAction 1.3.6.1.4.1.33.10.16.2.17.1.8 integer read-write
How to apply the expStaticToIsisErrorRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expStaticToIsisRuleErrorMetric 1.3.6.1.4.1.33.10.16.2.17.1.9 integer read-write
Error metric value to be applied to the metric in the route table entry before the route is advertised.
                           expStaticToIsisRuleExpenseMetricAction 1.3.6.1.4.1.33.10.16.2.17.1.10 integer read-write
How to apply the expStaticToIsisExpenseRuleMetric field to the metric in the route table entry before the route is advertised. Enumeration: 'decrement': 3, 'increment': 2, 'replace': 1.
                           expStaticToIsisRuleExpenseMetric 1.3.6.1.4.1.33.10.16.2.17.1.11 integer read-write
Expense metric value to be applied to the metric in the route table entry before the route is advertised.
                           expStaticToIsisRuleStatus 1.3.6.1.4.1.33.10.16.2.17.1.12 integer read-write
The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. Enumeration: 'valid': 2, 'invalid': 1.
             xFilter 1.3.6.1.4.1.33.10.16.3
                 ipIfFilterTable 1.3.6.1.4.1.33.10.16.3.1 no-access
Table of filter entries.
                     ipIfFilterEntry 1.3.6.1.4.1.33.10.16.3.1.1 no-access
A particular entry.
                         ipIfFilterIndex 1.3.6.1.4.1.33.10.16.3.1.1.1 integer read-only
The interface index with which this entry is associated. This value is the same as IfIndex.
                         ipIfFilterDstAddr 1.3.6.1.4.1.33.10.16.3.1.1.2 ipaddress read-only
The destination IP address to use in the filter match.
                         ipIfFilterDstMask 1.3.6.1.4.1.33.10.16.3.1.1.3 ipaddress read-only
The destination IP mask to use in the filter match.
                         ipIfFilterSrcAddr 1.3.6.1.4.1.33.10.16.3.1.1.4 ipaddress read-only
The source IP address to use in the filter match.
                         ipIfFilterSrcMask 1.3.6.1.4.1.33.10.16.3.1.1.5 ipaddress read-only
The source IP mask to use in the filter match.
                         ipIfFilterProtocol 1.3.6.1.4.1.33.10.16.3.1.1.6 integer read-only
The protocol to use in the filter match. The value 256 indicates any protocol.
                         ipIfFilterDstPort 1.3.6.1.4.1.33.10.16.3.1.1.7 integer read-only
The destination port to use in the filter match. This field only applies to TCP and UDP protocol packets. The value 65536 indicates any destination port.
                         ipIfFilterSrcPort 1.3.6.1.4.1.33.10.16.3.1.1.8 integer read-only
The source port to use in the filter match. This field only applies to TCP and UDP protocol packets. The value 65536 indicates any source port.
                         ipIfFilterAction 1.3.6.1.4.1.33.10.16.3.1.1.9 integer read-write
Control whether the packet for which this filter is the best match should be forwarded or discarded. Enumeration: 'forward': 2, 'discard': 1.
                         ipIfFilterStatus 1.3.6.1.4.1.33.10.16.3.1.1.10 integer read-write
The status of the filter entry. Set to 'invalid' to remove the entry. Enumeration: 'valid': 2, 'invalid': 1.
                 ipFilterState 1.3.6.1.4.1.33.10.16.3.2 integer read-write
The indication of whether this system does IP filtering. Enumeration: 'disabled': 1, 'enabled': 2.
                 ipIfFilter2Table 1.3.6.1.4.1.33.10.16.3.3 no-access
Table of filter entries.
                     ipIfFilter2Entry 1.3.6.1.4.1.33.10.16.3.3.1 no-access
A particular entry.
                         ipIfFilter2Index 1.3.6.1.4.1.33.10.16.3.3.1.1 integer read-only
The interface index with which this entry is associated. This value is the same as IfIndex.
                         ipIfFilter2DstAddr 1.3.6.1.4.1.33.10.16.3.3.1.2 ipaddress read-only
The destination IP address to use in the filter match.
                         ipIfFilter2DstMask 1.3.6.1.4.1.33.10.16.3.3.1.3 ipaddress read-only
The destination IP mask to use in the filter match.
                         ipIfFilter2SrcAddr 1.3.6.1.4.1.33.10.16.3.3.1.4 ipaddress read-only
The source IP address to use in the filter match.
                         ipIfFilter2SrcMask 1.3.6.1.4.1.33.10.16.3.3.1.5 ipaddress read-only
The source IP mask to use in the filter match.
                         ipIfFilter2Protocol 1.3.6.1.4.1.33.10.16.3.3.1.6 integer read-only
The protocol to use in the filter match. The value 256 indicates any protocol.
                         ipIfFilter2DstPortStart 1.3.6.1.4.1.33.10.16.3.3.1.7 integer read-only
The starting destination port in a range of destination ports to use in the filter match. This field only applies to TCP and UDP protocol packets.
                         ipIfFilter2SrcPortStart 1.3.6.1.4.1.33.10.16.3.3.1.8 integer read-only
The starting source port in a range of source ports to use in the filter match. This field only applies to TCP and UDP protocol packets.
                         ipIfFilter2Action 1.3.6.1.4.1.33.10.16.3.3.1.9 integer read-write
Control whether the packet for which this filter is the best match should be forwarded or discarded. Enumeration: 'forward': 2, 'discard': 1.
                         ipIfFilter2Status 1.3.6.1.4.1.33.10.16.3.3.1.10 integer read-write
The status of the filter entry. Set to 'invalid' to remove the entry. Enumeration: 'valid': 2, 'invalid': 1.
                         ipIfFilter2DstPortEnd 1.3.6.1.4.1.33.10.16.3.3.1.11 integer read-only
The ending destination port in a range of destination ports to use in the filter match. This field only applies to TCP and UDP protocol packets. This filed must also be greater or equal to the ipIfFilter2DstPortStart field.
                         ipIfFilter2SrcPortEnd 1.3.6.1.4.1.33.10.16.3.3.1.12 integer read-only
The starting source port in a range of source ports to use in the filter match. This field only applies to TCP and UDP protocol packets. This filed must also be greater or equal to the ipIfFilter2SrcPortStart field.
                         ipIfFilter2TcpSyn 1.3.6.1.4.1.33.10.16.3.3.1.13 integer read-only
The value of the TCP SYN and ACK bit to ues in the filter match. This field only applies to TCP packets. On indicates that the SYN bit is on and the ACK bit is off. Off is any other combination. Enumeration: 'on': 2, 'all': 3, 'off': 1.
                         ipIfFilter2ProtocolPriority 1.3.6.1.4.1.33.10.16.3.3.1.14 integer read-write
Control the priority at which the packet for which this filter is the best match should be placed on the WAN output queue. None indicates that the sending interfaces protocol priority should be used. Enumeration: 'high': 5, 'none': 256, 'medium': 3, 'low': 1.
       xRip 1.3.6.1.4.1.33.10.18
             ripState 1.3.6.1.4.1.33.10.18.1 integer read-write
The indication of whether this system participates in RIP. Enumeration: 'disabled': 1, 'enabled': 2.
             ripStatus 1.3.6.1.4.1.33.10.18.2 integer read-only
The status of the RIP software. Enumeration: 'active': 1, 'ipDisabled': 3, 'noMemory': 5, 'noNetworksEnabled': 4, 'ripDisabled': 2.
             ripNetTable 1.3.6.1.4.1.33.10.18.3 no-access
Table of RIP entries.
                 ripNetEntry 1.3.6.1.4.1.33.10.18.3.1 no-access
A particular entry.
                     ripNetNet 1.3.6.1.4.1.33.10.18.3.1.1 ipaddress read-only
The IP Network to which this entry applies.
                     ripNetState 1.3.6.1.4.1.33.10.18.3.1.2 integer read-write
This value controls the RIP protocol on this network. Enumeration: 'disabled': 1, 'routerDiscovery': 2, 'full': 3.
                     ripNetRipsIn 1.3.6.1.4.1.33.10.18.3.1.3 counter read-only
The number of RIP packets received from routers on this IP network.
                     ripNetRipsOut 1.3.6.1.4.1.33.10.18.3.1.4 counter read-only
The number of RIP packets sent to routers on this IP network.
                     ripNetAlgorithm 1.3.6.1.4.1.33.10.18.3.1.5 integer read-write
This value controls the RIP algorithm on this network. Enumeration: 'poisonedReverse': 1, 'splitHorizon': 2.
       xlpd 1.3.6.1.4.1.33.10.19
             lpdQueueTable 1.3.6.1.4.1.33.10.19.1 no-access
A list of lpd queues on the server.
                 lpdQueueEntry 1.3.6.1.4.1.33.10.19.1.1 no-access
Lpd parameter values plus counters for an individual lpd queue.
                     lpdQueueStatus 1.3.6.1.4.1.33.10.19.1.1.1 integer read-write
Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR/PURGE SERVER LPD QUEUE command. Setting the value to 'valid' validates (creates) the entry, corresonding directly to the DEF/SET SERVER LPD QUEUE and lpd create commands. Enumeration: 'valid': 2, 'invalid': 1.
                     lpdQueueName 1.3.6.1.4.1.33.10.19.1.1.2 displaystring read-only
Name of the LPD queue, case sensitive.
                     lpdQueuePorts 1.3.6.1.4.1.33.10.19.1.1.3 octet string read-write
List of ports assigned to the queue. An lpd queue can be associated with more than 1 port. This object corresponds to the port-list in the DEF/SET SERVER LPD QUEUE and lpc/create commands. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the system. Port numbers are as defined for charPortIndex in the Character MIB [11]. Corresponding bit numbers start with 1 as the high-order bit of the first octet.
                     lpdQueueEnabled 1.3.6.1.4.1.33.10.19.1.1.4 integer read-write
Flag indicates if the queue is enabled. A 'disabled' queue will reject print requests from remote systems. A 'enabled' queue accepts requests for printing. Enumeration: 'disabled': 1, 'enabled': 2.
                     lpdQueueLfConversion 1.3.6.1.4.1.33.10.19.1.1.5 integer read-write
Flag indicates if the queue is converting linefeeds to linefeeds, carriagereturns. 'lfcr' does the converion, 'lf' does not. Enumeration: 'lf': 1, 'lfcr': 2.
                     lpdQueueTotalJobs 1.3.6.1.4.1.33.10.19.1.1.6 gauge read-only
The total number of jobs on the queue. This number should be equal to the number of active and waiting jobs. (lpdQueueActive + lpdQueueWaiting)
                     lpdQueueActiveJobs 1.3.6.1.4.1.33.10.19.1.1.7 gauge read-only
The number of active jobs on the queue. An active job is a job that has been assigned a port is in the process of receiving data from a remote host and sending it out the port.
                     lpdQueueWaitingJobs 1.3.6.1.4.1.33.10.19.1.1.8 gauge read-only
The number of waiting jobs on the queue. A waiting job is a job that needs a port to send its data to. This implies that the ports associated with this queue are busy.
                     lpdQueueProcessedJobs 1.3.6.1.4.1.33.10.19.1.1.9 counter read-only
The total number of jobs processed by this queue since server boot.
                     lpdQueueFormFeed 1.3.6.1.4.1.33.10.19.1.1.10 integer read-write
A control to determine how we will send out a formfeed when printing a lpd job. formfeedafter: Send after job, formfeedbefore: Send before job, formfeednone: Send no formfeed. Enumeration: 'formfeednone': 3, 'formfeedafter': 1, 'formfeedbefore': 2.
                     lpdQueueBypass 1.3.6.1.4.1.33.10.19.1.1.11 integer read-write
Control for a queue to bypass a LPD port which has output inhibited via flow control. Corresponds directly to the value labeled 'Bypass' in the SERVER LPD QUEUE display. Enumeration: 'disabled': 1, 'enabled': 2.
             lpdJobTable 1.3.6.1.4.1.33.10.19.2 no-access
A list of lpd jobs.
                 lpdJobEntry 1.3.6.1.4.1.33.10.19.2.1 no-access
A single lpd Job.
                     lpdJobStatus 1.3.6.1.4.1.33.10.19.2.1.1 integer read-write
Status of this entry. Setting this object to 'invalid' will remove the job from the queue. Setting this object ot 'valid' has no effect since the only way to create an lpd job is with the lpd protocol. Enumeration: 'valid': 2, 'invalid': 1.
                     lpdJobNumber 1.3.6.1.4.1.33.10.19.2.1.2 integer read-only
The queue relative job number for this lpd job. Job numbers are assigned as jobs are accepted onto the queue. Job numbers are reset to 1 when they reach a value greater than 1000 and the queue goes empty.
                     lpdJobAssignedPort 1.3.6.1.4.1.33.10.19.2.1.3 integer read-only
The number of the port assigned to the lpd job.
                     lpdJobFileSize 1.3.6.1.4.1.33.10.19.2.1.4 integer read-only
The size of the file being sent from the remote system.
                     lpdJobHostName 1.3.6.1.4.1.33.10.19.2.1.5 displaystring read-only
The name of the host sending the job.
                     lpdJobFileName 1.3.6.1.4.1.33.10.19.2.1.6 displaystring read-only
The name of the file being sent.
                     lpdJobState 1.3.6.1.4.1.33.10.19.2.1.7 integer read-only
The current state of the lpd job. A typical job transistions through the following states: initialize->waiting->assigned->printingdata-> printingcontrol->completed. Enumeration: 'flushing': 9, 'printingData': 4, 'completed': 7, 'assigned': 3, 'printingControl': 5, 'waiting': 2, 'aborted': 6, 'error': 8, 'initialized': 1.
       xSecurID 1.3.6.1.4.1.33.10.20
             securIDServerName0 1.3.6.1.4.1.33.10.20.1 displaystring read-write
The Domain name of the first SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER0 and the value labeled 'SecurID Server0:' in the SERVER SECURID display.
             securIDServerName1 1.3.6.1.4.1.33.10.20.2 displaystring read-write
The Domain name of the second SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER1 and the value labeled 'SecurID Server1:' in the SERVER SECURID display.
             securIDServerName2 1.3.6.1.4.1.33.10.20.3 displaystring read-write
The Domain name of the third SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER2 and the value labeled 'SecurID Server2:' in the SERVER SECURID display.
             securIDServerName3 1.3.6.1.4.1.33.10.20.4 displaystring read-write
The Domain name of the fourth SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER3 and the value labeled 'SecurID Server3:' in the SERVER SECURID display.
             securIDServerName4 1.3.6.1.4.1.33.10.20.5 displaystring read-write
The Domain name of the fifth SecurID server to try when the system verifies a SecurID PASSCODE. Corresponds directly to SERVER SECURID SERVER4 and the value labeled 'SecurID Server4:' in the SERVER SECURID display.
             securIDMaxRetries 1.3.6.1.4.1.33.10.20.6 integer read-write
The maximum number of times the server will try any single SecurID server to validate a PASSCODE. Corresponds directly to SERVER SECURID ACMMAXRETRIES and the value labeled 'SecurID ACMMAXRETRIES:' in the SERVER SECURID display.
             securIDBaseTimeout 1.3.6.1.4.1.33.10.20.7 integer read-write
The initial timeout value to be used between prompts for a SecurID PASSCODE. Corresponds directly to SERVER SECURID ACMBASETIMEOUT and the value labeled 'SecurID ACMBASETIMEOUT:' in the SERVER SECURID display.
             securIDPort 1.3.6.1.4.1.33.10.20.8 integer read-write
The UDP port number to be used when communicating with the SecurID servers. Corresponds directly to SERVER SECURID ACM_PORT and the value labeled 'SecurID ACM_PORT:' in the SERVER SECURID display.
             securIDQueryLimit 1.3.6.1.4.1.33.10.20.9 integer read-write
The maximum number of times a user will be queried for a SecurID PASSCODE before being logged out. Corresponds directly to SERVER SECURID QUERY LIMIT and the value labeled 'SecurID Query Limit:' in the SERVER SECURID display.
             securIDEncryptionMode 1.3.6.1.4.1.33.10.20.10 integer read-write
The type of encryption to use in SecurID validation. Corresponds directly to the value labeled 'Encryption Mode' in the SERVER SECURID display. Enumeration: 'sdiBlockCipher': 1, 'des': 2.
             securIDInsecureLogins 1.3.6.1.4.1.33.10.20.11 counter read-only
The number of user logins on ports for which SecurID user verification is not enabled. Corresponds directly to the value labeled 'Logins without SecurID:' in the SERVER SECURID display.
             securIDSecureLogins 1.3.6.1.4.1.33.10.20.12 counter read-only
The number of successful user logins on ports for which SecurID user verification is enabled. Corresponds directly to the value labeled 'Successful Logins:' in the SERVER SECURID display.
             securIDSecureLoginsFailed 1.3.6.1.4.1.33.10.20.13 counter read-only
The number of verification failures due to incorrect PASSCODE for attempted user logins on ports for which SecurID user verification is enabled. Corresponds directly to the value labeled 'Unsuccessful Logins:' in the SERVER SECURID display.
             securIDServerAccess0 1.3.6.1.4.1.33.10.20.14 counter read-only
The number of times the system successfully accessed the SecurID server0. Corresponds directly to the value labeled 'Attempts to access:', 'Server0', and 'Successful:' in the SERVER SECURID display.
             securIDServerAccessFailed0 1.3.6.1.4.1.33.10.20.15 counter read-only
The number of times the system unsuccessfully accessed the SecurID server0. Corresponds directly to the value labeled 'Attempts to access:', 'Server0', and 'UnSuccessful:' in the SERVER SECURID display.
             securIDServerAccess1 1.3.6.1.4.1.33.10.20.16 counter read-only
The number of times the system successfully accessed the SecurID server1. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'Successful:' in the SERVER SECURID display.
             securIDServerAccessFailed1 1.3.6.1.4.1.33.10.20.17 counter read-only
The number of times the system unsuccessfully accessed the SecurID server1. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'UnSuccessful:' in the SERVER SECURID display.
             securIDServerAccess2 1.3.6.1.4.1.33.10.20.18 counter read-only
The number of times the system successfully accessed the SecurID server2. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'Successful:' in the SERVER SECURID display.
             securIDServerAccessFailed2 1.3.6.1.4.1.33.10.20.19 counter read-only
The number of times the system unsuccessfully accessed the SecurID server2. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and 'UnSuccessful:' in the SERVER SECURID display.
             securIDServerAccess3 1.3.6.1.4.1.33.10.20.20 counter read-only
The number of times the system successfully accessed the SecurID server3. Corresponds directly to the value labeled 'Attempts to access:', 'Server3', and 'Successful:' in the SERVER SECURID display.
             securIDServerAccessFailed3 1.3.6.1.4.1.33.10.20.21 counter read-only
The number of times the system unsuccessfully accessed the SecurID server3. Corresponds directly to the value labeled 'Attempts to access:', 'Server3', and 'UnSuccessful:' in the SERVER SECURID display.
             securIDServerAccess4 1.3.6.1.4.1.33.10.20.22 counter read-only
The number of times the system successfully accessed the SecurID server4. Corresponds directly to the value labeled 'Attempts to access:', 'Server4', and 'Successful:' in the SERVER SECURID display.
             securIDServerAccessFailed4 1.3.6.1.4.1.33.10.20.23 counter read-only
The number of times the system unsuccessfully accessed the SecurID server4. Corresponds directly to the value labeled 'Attempts to access:', 'Server4', and 'UnSuccessful:' in the SERVER SECURID display.
             securIDErrorPortIndex 1.3.6.1.4.1.33.10.20.24 integer read-only
The index of the most recent port on which a SecurID access violation occurred. Corresponds directly to the value labeled 'Last Unsuccessful Login:' in the SERVER SECURID display.
             securIDError 1.3.6.1.4.1.33.10.20.25 integer read-only
The error number of the most recent SecurID-related error. Corresponds directly to the value labeled 'Reason:' in the SERVER SECURID display. See iTouch documentation for a complete list of error numbers and their meaning.
             securIDErrorUsername 1.3.6.1.4.1.33.10.20.26 displaystring read-only
The username associated with the most recent SecurID-related error. Corresponds directly to the value labeled 'Username:' in the SERVER SECURID display.
             securIDPortTable 1.3.6.1.4.1.33.10.20.27 no-access
A list of SecurID character port entries.
                   securIDPortEntry 1.3.6.1.4.1.33.10.20.27.1 no-access
Parameter values for a SecurID port.
                       securIDPortIndex 1.3.6.1.4.1.33.10.20.27.1.1 integer read-only
An index value that uniquely identifies a port could relate to SecurID. The port identified by a particular value of this index is the same port as identified by charPortIndex in the Proposed Standard Internet Character MIB.
                       securIDPortStatus 1.3.6.1.4.1.33.10.20.27.1.2 integer read-write
A control indicating the level of SecurID operation on the port. Corresponds directly to PORT SECURID and the value 'SecurID' following the label 'Enabled Characteristics' in the PORT CHARACTERISTICS display. Enumeration: 'disabled': 1, 'enabled': 2.
       xSsh 1.3.6.1.4.1.33.10.23
             sshPortTable 1.3.6.1.4.1.33.10.23.1 no-access
A list of SSH port entries
                 sshPortEntry 1.3.6.1.4.1.33.10.23.1.1 no-access
Parameter values for an SSH port.
                     sshPortIndex 1.3.6.1.4.1.33.10.23.1.1.1 integer read-only
An index value that uniquely identifies an SSH port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the proposed standard Internet Character MIB.
                     sshPortIncomingTcpPort 1.3.6.1.4.1.33.10.23.1.1.2 integer read-write
Specifies the TCP port number used to identify the port when a SSH connection request arrives at the server. The default for a physical port is 2022 + 100 * port's physical port number. The default is 22 for virtual ports. Corresponds directly to the value labeled 'Remote Port:' in the PORT SSH CHARACTERISTICS display.
                     sshPortNewlineFiltering 1.3.6.1.4.1.33.10.23.1.1.3 integer read-write
Translation to apply to newline sequences (CR/NULL or CR/LF) received from the network during a SSH session, before sending the newline to the character port. The value indicates which input sequence is converted to which output sequence and sent to the character port, with 'none' meaning no translation. Corresponds directly to the value labeled 'Newline Filtering:' in the PORT SSH CHARACTERISTICS display. Enumeration: 'none': 1, 'crNullToCr': 6, 'crLfToCr': 4, 'crNullToCrLf': 7, 'crToCrLf': 2, 'crLfToCrNull': 5, 'crToCrNull': 3.
                     sshPortNewline 1.3.6.1.4.1.33.10.23.1.1.4 integer read-write
Translation to apply to newline (carriage return) received from the character port during an SSH session, before sending the newline to the remote partner. Corresponds directly to the value labeled 'Newline:' in the PORT SSH CHARACTERISTICS display. Enumeration: 'none': 1, 'crNullToCr': 6, 'crLfToCr': 4, 'crNullToCrLf': 7, 'crToCrLf': 2, 'crLfToCrNull': 5, 'crToCrNull': 3.
                     sshPortTransmitBufferedTime 1.3.6.1.4.1.33.10.23.1.1.5 integer read-write
Number of milliseconds to wait before transmitting data received from a character port during an interactive SSH session. Corresponds directly to the value labeled 'Transmit Buffered Time:' in the PORT SSH CHARACTERISTICS display.
                     sshPortRemoteProtocol 1.3.6.1.4.1.33.10.23.1.1.6 integer read-write
Indicates which remote protocols will be accepted at this port. Corresponds indirectly to the presence of 'Telnet' or 'SSH' under the label 'Enabled Characteristics:' in the PORT SSH CHARACTERISTICS display. If both protocols are accepted at the port, the choice of protocol is determined by which features are enabled on the server with SSH taking precedence over Telnet. Enumeration: 'both': 3, 'ssh': 1, 'telnet': 2.
             sshCipherMask 1.3.6.1.4.1.33.10.23.2 octet string read-write
This is a list of the encryption methods supported. The OCTET STRING contains a bitmap, with one bit for each cipher type. Corresponding bit numbers start with 0 as the low-order bit of the second octet. The following bit positions are defined: none(0), des(2), tripleDes(3), and blowfish(6). Corresponds directly to the value labeled 'SSH Cipher Enabled:' in the SERVER SSH CHARACTERISTICS display.
             sshAuthenticationTimeout 1.3.6.1.4.1.33.10.23.3 integer read-write
The timeout in minutes before disconnecting if no successful authentication of SSH parties has been made. Corresponds directly to the value labeled 'Authentication Timeout:' in the SERVER SSH CHARACTERISTICS display.
             sshHostKeyLength 1.3.6.1.4.1.33.10.23.4 integer read-write
The bit length of the SSH host encryption key. When modified, the desired change does not occur until the next system initialization. Corresponds directly to the value labeled 'Host Key Length:' in the SERVER SSH CHARACTERISTICS display.
             sshHostKeyGenerate 1.3.6.1.4.1.33.10.23.5 integer read-write
For a set-request with a value of generate or update, a new host key will be generated in the background. When modified with generate, the desired change does not occur until the next system initialization whereas when modified with update the change goes into effect upon completion of the new key. In response to a get-request or a get-next-request the agent will respond ready except when a host key is being created in which case the agent responds generate. Enumeration: 'ready': 1, 'generate': 2, 'update': 3.
             sshServerKeyLength 1.3.6.1.4.1.33.10.23.6 integer read-write
The bit length of the SSH server encryption key. The difference between the server and host key lengths should be greater than 128 bits. Corresponds directly to the value labeled 'Server Key Length:' in the SERVER SSH CHARACTERISTICS display.
             sshServerKeyTtl 1.3.6.1.4.1.33.10.23.7 integer read-write
The time in minutes that the server key remains valid. After this time the server key is automatically re-generated. Corresponds directly to the value labeled 'Server Key Timeout:' in the SERVER SSH CHARACTERISTICS display.
             sshServerMaxBufferSize 1.3.6.1.4.1.33.10.23.8 integer read-write
The size of the four buffers used by SSH for input and output. These buffers are used for data coming from the console, going to the network, coming from the network and going to the console.